i2c: efm32: fix binding doc

Fix dt compatible string in the binding document which was changed
during review in the driver, but it seem I messed up to adapt the
documentation accordingly.

Also change status from "disabled" to "ok" which makes more sense for an
example.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
index ead4dd33ab66b0aad3a44590d5c4f3182e25f710..fc15ac5194370d695d89b5d88c2652156358b6ea 100644 (file)
--- a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
@@ -3,7 +3,7 @@
 Required properties :
 
  - reg : Offset and length of the register set for the device
- - compatible : should be "efm32,i2c"
+ - compatible : should be "energymicro,efm32-i2c"
  - interrupts : the interrupt number
  - clocks : reference to the module clock
 
@@ -17,12 +17,12 @@ Example:
        i2c0: i2c@4000a000 {
                #address-cells = <1>;
                #size-cells = <0>;
-               compatible = "efm32,i2c";
+               compatible = "energymicro,efm32-i2c";
                reg = <0x4000a000 0x400>;
                interrupts = <9>;
                clocks = <&cmu clk_HFPERCLKI2C0>;
                clock-frequency = <100000>;
-               status = "disabled";
+               status = "ok";
                efm32,location = <3>;
 
                eeprom@50 {