mmc: sdhci-msm: Convert to mmc_send_tuning()
authorUlf Hansson <ulf.hansson@linaro.org>
Fri, 5 Dec 2014 11:59:41 +0000 (12:59 +0100)
committerUlf Hansson <ulf.hansson@linaro.org>
Mon, 8 Dec 2014 08:21:06 +0000 (09:21 +0100)
Instead of having a local hack taking care of sending the tuning
command and as well to verify the response pattern, let's convert to
the common mmc_send_tuning() API instead.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Georgi Djakov <gdjakov@mm-sol.com>
Acked-by: Georgi Djakov <gdjakov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
drivers/mmc/host/sdhci-msm.c

index 30804385af6dd02106045d7ef0109319ec5318a1..3d32ce896b091f51cdfd74b383ade7ad6e8477a7 100644 (file)
@@ -339,9 +339,7 @@ static int msm_init_cm_dll(struct sdhci_host *host)
 static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
 {
        int tuning_seq_cnt = 3;
-       u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0;
-       const u8 *tuning_block_pattern = tuning_blk_pattern_4bit;
-       int size = sizeof(tuning_blk_pattern_4bit);
+       u8 phase, tuned_phases[16], tuned_phase_cnt = 0;
        int rc;
        struct mmc_host *mmc = host->mmc;
        struct mmc_ios ios = host->mmc->ios;
@@ -355,53 +353,21 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
              (ios.timing == MMC_TIMING_UHS_SDR104)))
                return 0;
 
-       if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) &&
-           (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) {
-               tuning_block_pattern = tuning_blk_pattern_8bit;
-               size = sizeof(tuning_blk_pattern_8bit);
-       }
-
-       data_buf = kmalloc(size, GFP_KERNEL);
-       if (!data_buf)
-               return -ENOMEM;
-
 retry:
        /* First of all reset the tuning block */
        rc = msm_init_cm_dll(host);
        if (rc)
-               goto out;
+               return rc;
 
        phase = 0;
        do {
-               struct mmc_command cmd = { 0 };
-               struct mmc_data data = { 0 };
-               struct mmc_request mrq = {
-                       .cmd = &cmd,
-                       .data = &data
-               };
-               struct scatterlist sg;
-
                /* Set the phase in delay line hw block */
                rc = msm_config_cm_dll_phase(host, phase);
                if (rc)
-                       goto out;
+                       return rc;
 
-               cmd.opcode = opcode;
-               cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
-               data.blksz = size;
-               data.blocks = 1;
-               data.flags = MMC_DATA_READ;
-               data.timeout_ns = NSEC_PER_SEC; /* 1 second */
-
-               data.sg = &sg;
-               data.sg_len = 1;
-               sg_init_one(&sg, data_buf, size);
-               memset(data_buf, 0, size);
-               mmc_wait_for_req(mmc, &mrq);
-
-               if (!cmd.error && !data.error &&
-                   !memcmp(data_buf, tuning_block_pattern, size)) {
+               rc = mmc_send_tuning(mmc);
+               if (!rc) {
                        /* Tuning is successful at this tuning point */
                        tuned_phases[tuned_phase_cnt++] = phase;
                        dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
@@ -413,7 +379,7 @@ retry:
                rc = msm_find_most_appropriate_phase(host, tuned_phases,
                                                     tuned_phase_cnt);
                if (rc < 0)
-                       goto out;
+                       return rc;
                else
                        phase = rc;
 
@@ -423,7 +389,7 @@ retry:
                 */
                rc = msm_config_cm_dll_phase(host, phase);
                if (rc)
-                       goto out;
+                       return rc;
                dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
                         mmc_hostname(mmc), phase);
        } else {
@@ -435,8 +401,6 @@ retry:
                rc = -EIO;
        }
 
-out:
-       kfree(data_buf);
        return rc;
 }