stmmac: fix driver built w/ w/o both pci and platf modules
authorGiuseppe CAVALLARO <peppe.cavallaro@st.com>
Thu, 7 Jun 2012 19:25:07 +0000 (19:25 +0000)
committerDavid S. Miller <davem@davemloft.net>
Fri, 8 Jun 2012 05:46:48 +0000 (22:46 -0700)
The commit ba27ec66ffeb78cbf fixes the Kconfig of the
driver when built as module allowing to select/unselect
the PCI and Platform modules that are not anymore mutually
exclusive. This patch fixes and guarantees that the driver
builds on all the platforms w/ w/o PCI and when select/unselect
the two stmmac supports. In case of there are some problems
on both the configuration and the pci/pltf registration the
module_init will fail.

v2: set the CONFIG_STMMAC_PLATFORM enabled by default.
I've just noticed that this can actually help on
some configurations that don't enable any STMMAC
options by default (e.g. SPEAr).

v3: change printk level when do not register the driver.

Reported-by: Fengguang Wu <wfg@linux.intel.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/stmicro/stmmac/Kconfig
drivers/net/ethernet/stmicro/stmmac/stmmac.h
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

index 0076f770e637d922f620cb7c9774fbeb2798f226..9f448279e12a52ea7965c3500bd910c859afbb6b 100644 (file)
@@ -15,6 +15,7 @@ if STMMAC_ETH
 config STMMAC_PLATFORM
        bool "STMMAC Platform bus support"
        depends on STMMAC_ETH
+       default y
        ---help---
          This selects the platform specific bus support for
          the stmmac device driver. This is the driver used
index 6d07ba2c86615f632071ac097c7a0bac7851529f..94b21b409d88f9863a783b1e06711693209941fa 100644 (file)
@@ -26,6 +26,7 @@
 #include <linux/clk.h>
 #include <linux/stmmac.h>
 #include <linux/phy.h>
+#include <linux/pci.h>
 #include "common.h"
 #ifdef CONFIG_STMMAC_TIMER
 #include "stmmac_timer.h"
@@ -95,8 +96,6 @@ extern int stmmac_mdio_register(struct net_device *ndev);
 extern void stmmac_set_ethtool_ops(struct net_device *netdev);
 extern const struct stmmac_desc_ops enh_desc_ops;
 extern const struct stmmac_desc_ops ndesc_ops;
-extern struct pci_driver stmmac_pci_driver;
-extern struct platform_driver stmmac_pltfr_driver;
 int stmmac_freeze(struct net_device *ndev);
 int stmmac_restore(struct net_device *ndev);
 int stmmac_resume(struct net_device *ndev);
@@ -144,3 +143,60 @@ static inline int stmmac_clk_get(struct stmmac_priv *priv)
        return 0;
 }
 #endif /* CONFIG_HAVE_CLK */
+
+
+#ifdef CONFIG_STMMAC_PLATFORM
+extern struct platform_driver stmmac_pltfr_driver;
+static inline int stmmac_register_platform(void)
+{
+       int err;
+
+       err = platform_driver_register(&stmmac_pltfr_driver);
+       if (err)
+               pr_err("stmmac: failed to register the platform driver\n");
+
+       return err;
+}
+static inline void stmmac_unregister_platform(void)
+{
+       platform_driver_register(&stmmac_pltfr_driver);
+}
+#else
+static inline int stmmac_register_platform(void)
+{
+       pr_debug("stmmac: do not register the platf driver\n");
+
+       return -EINVAL;
+}
+static inline void stmmac_unregister_platform(void)
+{
+}
+#endif /* CONFIG_STMMAC_PLATFORM */
+
+#ifdef CONFIG_STMMAC_PCI
+extern struct pci_driver stmmac_pci_driver;
+static inline int stmmac_register_pci(void)
+{
+       int err;
+
+       err = pci_register_driver(&stmmac_pci_driver);
+       if (err)
+               pr_err("stmmac: failed to register the PCI driver\n");
+
+       return err;
+}
+static inline void stmmac_unregister_pci(void)
+{
+       pci_unregister_driver(&stmmac_pci_driver);
+}
+#else
+static inline int stmmac_register_pci(void)
+{
+       pr_debug("stmmac: do not register the PCI driver\n");
+
+       return -EINVAL;
+}
+static inline void stmmac_unregister_pci(void)
+{
+}
+#endif /* CONFIG_STMMAC_PCI */
index 36385695141236a63eeed4cb8d769d670ca1e8f0..51b3b68528ee8a429385f5083355125f2b4260c4 100644 (file)
@@ -42,7 +42,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/prefetch.h>
-#include <linux/pci.h>
 #ifdef CONFIG_STMMAC_DEBUG_FS
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@@ -2094,25 +2093,29 @@ int stmmac_restore(struct net_device *ndev)
 }
 #endif /* CONFIG_PM */
 
+/* Driver can be configured w/ and w/ both PCI and Platf drivers
+ * depending on the configuration selected.
+ */
 static int __init stmmac_init(void)
 {
-       int err = 0;
+       int err_plt = 0;
+       int err_pci = 0;
 
-       err = platform_driver_register(&stmmac_pltfr_driver);
+       err_plt = stmmac_register_platform();
+       err_pci = stmmac_register_pci();
 
-       if (!err) {
-               err = pci_register_driver(&stmmac_pci_driver);
-               if (err)
-                       platform_driver_unregister(&stmmac_pltfr_driver);
+       if ((err_pci) && (err_plt)) {
+               pr_err("stmmac: driver registration failed\n");
+               return -EINVAL;
        }
 
-       return err;
+       return 0;
 }
 
 static void __exit stmmac_exit(void)
 {
-       pci_unregister_driver(&stmmac_pci_driver);
-       platform_driver_unregister(&stmmac_pltfr_driver);
+       stmmac_unregister_platform();
+       stmmac_unregister_pci();
 }
 
 module_init(stmmac_init);