#include "ieee80211_i.h"
#include "ieee80211_led.h"
+#ifdef CONFIG_MAC80211_MESH
+#include "mesh.h"
+#endif
#include "wep.h"
#include "wpa.h"
#include "tkip.h"
return RX_CONTINUE;
}
+#ifdef CONFIG_MAC80211_MESH
+#define msh_h_get(h, l) ((struct ieee80211s_hdr *) ((u8 *)h + l))
+static ieee80211_rx_result
+ieee80211_rx_mesh_check(struct ieee80211_txrx_data *rx)
+{
+ int hdrlen = ieee80211_get_hdrlen(rx->fc);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data;
+ if ((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) {
+ if (!((rx->fc & IEEE80211_FCTL_FROMDS) &&
+ (rx->fc & IEEE80211_FCTL_TODS)))
+ return RX_DROP_MONITOR;
+ if (memcmp(hdr->addr4, rx->dev->dev_addr, ETH_ALEN) == 0)
+ return RX_DROP_MONITOR;
+ }
+
+ /* If there is not an established peer link and this is not a peer link
+ * establisment frame, beacon or probe, drop the frame.
+ */
+
+ if (!rx->sta || rx->sta->plink_state != ESTAB) {
+ struct ieee80211_mgmt *mgmt;
+ if ((rx->fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_MGMT)
+ return RX_DROP_MONITOR;
+
+ switch (rx->fc & IEEE80211_FCTL_STYPE) {
+ case IEEE80211_STYPE_ACTION:
+ mgmt = (struct ieee80211_mgmt *)hdr;
+ if (mgmt->u.action.category != PLINK_CATEGORY)
+ return RX_DROP_MONITOR;
+ /* fall through on else */
+ case IEEE80211_STYPE_PROBE_REQ:
+ case IEEE80211_STYPE_PROBE_RESP:
+ case IEEE80211_STYPE_BEACON:
+ return RX_CONTINUE;
+ break;
+ default:
+ return RX_DROP_MONITOR;
+ }
+
+ } else if ((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA &&
+ is_broadcast_ether_addr(hdr->addr1) &&
+ mesh_rmc_check(hdr->addr4, msh_h_get(hdr, hdrlen), rx->dev))
+ return RX_DROP_MONITOR;
+ else
+ return RX_CONTINUE;
+}
+#endif
+
+
static ieee80211_rx_result
ieee80211_rx_h_check(struct ieee80211_txrx_data *rx)
{
struct ieee80211_hdr *hdr;
+
hdr = (struct ieee80211_hdr *) rx->skb->data;
/* Drop duplicate 802.11 retransmissions (IEEE 802.11 Chap. 9.2.9) */
* deauth/disassoc frames when needed. In addition, hostapd is
* responsible for filtering on both auth and assoc states.
*/
+
+#ifdef CONFIG_MAC80211_MESH
+ if (rx->sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT)
+ return ieee80211_rx_mesh_check(rx);
+#endif
+
if (unlikely(((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA ||
((rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL &&
(rx->fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PSPOLL)) &&
/* Update last_rx only for unicast frames in order to prevent
* the Probe Request frames (the only broadcast frames from a
* STA in infrastructure mode) from keeping a connection alive.
+ * Mesh beacons will update last_rx when if they are found to
+ * match the current local configuration when processed.
*/
sta->last_rx = jiffies;
}
hdrlen = ieee80211_get_hdrlen(fc);
+#ifdef CONFIG_MAC80211_MESH
+ if (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) {
+ int meshhdrlen = ieee80211_get_mesh_hdrlen(
+ (struct ieee80211s_hdr *) (skb->data + hdrlen));
+ /* Copy on cb:
+ * - mesh header: to be used for mesh forwarding
+ * decision. It will also be used as mesh header template at
+ * tx.c:ieee80211_subif_start_xmit() if interface
+ * type is mesh and skb->pkt_type == PACKET_OTHERHOST
+ * - ta: to be used if a RERR needs to be sent.
+ */
+ memcpy(skb->cb, skb->data + hdrlen, meshhdrlen);
+ memcpy(MESH_PREQ(skb), hdr->addr2, ETH_ALEN);
+ hdrlen += meshhdrlen;
+ }
+#endif
+
/* convert IEEE 802.11 header + possible LLC headers into Ethernet
* header
* IEEE 802.11 address fields:
memcpy(dst, hdr->addr3, ETH_ALEN);
memcpy(src, hdr->addr4, ETH_ALEN);
- if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_WDS)) {
- if (net_ratelimit())
- printk(KERN_DEBUG "%s: dropped FromDS&ToDS "
+ if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_WDS &&
+ sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)) {
+ if (net_ratelimit())
+ printk(KERN_DEBUG "%s: dropped FromDS&ToDS "
"frame (RA=%s TA=%s DA=%s SA=%s)\n",
rx->dev->name,
print_mac(mac, hdr->addr1),
}
}
+#ifdef CONFIG_MAC80211_MESH
+ /* Mesh forwarding */
+ if (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) {
+ u8 *mesh_ttl = &((struct ieee80211s_hdr *)skb->cb)->ttl;
+ (*mesh_ttl)--;
+
+ if (is_multicast_ether_addr(skb->data)) {
+ if (*mesh_ttl > 0) {
+ xmit_skb = skb_copy(skb, GFP_ATOMIC);
+ if (!xmit_skb && net_ratelimit())
+ printk(KERN_DEBUG "%s: failed to clone "
+ "multicast frame\n", dev->name);
+ else
+ xmit_skb->pkt_type = PACKET_OTHERHOST;
+ } else
+ sdata->u.sta.mshstats.dropped_frames_ttl++;
+
+ } else if (skb->pkt_type != PACKET_OTHERHOST &&
+ compare_ether_addr(dev->dev_addr, skb->data) != 0) {
+ if (*mesh_ttl == 0) {
+ sdata->u.sta.mshstats.dropped_frames_ttl++;
+ dev_kfree_skb(skb);
+ skb = NULL;
+ } else {
+ xmit_skb = skb;
+ xmit_skb->pkt_type = PACKET_OTHERHOST;
+ if (!(dev->flags & IFF_PROMISC))
+ skb = NULL;
+ }
+ }
+ }
+#endif
+
if (skb) {
/* deliver to local stack */
skb->protocol = eth_type_trans(skb, dev);
sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev);
if ((sdata->vif.type == IEEE80211_IF_TYPE_STA ||
- sdata->vif.type == IEEE80211_IF_TYPE_IBSS) &&
+ sdata->vif.type == IEEE80211_IF_TYPE_IBSS ||
+ sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) &&
!(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME))
ieee80211_sta_rx_mgmt(rx->dev, rx->skb, rx->u.rx.status);
else
#include "ieee80211_i.h"
#include "ieee80211_led.h"
+#ifdef CONFIG_MAC80211_MESH
+#include "mesh.h"
+#endif
#include "wep.h"
#include "wpa.h"
#include "wme.h"
(tx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_PROBE_REQ))
return TX_DROP;
+ if (tx->sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT)
+ return TX_CONTINUE;
+
if (tx->flags & IEEE80211_TXRXD_TXPS_BUFFERED)
return TX_CONTINUE;
struct ieee80211_tx_packet_data *pkt_data;
struct ieee80211_sub_if_data *sdata;
int ret = 1, head_need;
- u16 ethertype, hdrlen, fc;
+ u16 ethertype, hdrlen, meshhdrlen = 0, fc;
struct ieee80211_hdr hdr;
+ struct ieee80211s_hdr mesh_hdr;
const u8 *encaps_data;
int encaps_len, skip_header_bytes;
int nh_pos, h_pos;
memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN);
hdrlen = 30;
break;
+#ifdef CONFIG_MAC80211_MESH
+ case IEEE80211_IF_TYPE_MESH_POINT:
+ fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS;
+ /* RA TA DA SA */
+ if (is_multicast_ether_addr(skb->data))
+ memcpy(hdr.addr1, skb->data, ETH_ALEN);
+ else if (mesh_nexthop_lookup(hdr.addr1, skb, dev))
+ return 0;
+ memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
+ memcpy(hdr.addr3, skb->data, ETH_ALEN);
+ memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN);
+ if (skb->pkt_type == PACKET_OTHERHOST) {
+ /* Forwarded frame, keep mesh ttl and seqnum */
+ struct ieee80211s_hdr *prev_meshhdr;
+ prev_meshhdr = ((struct ieee80211s_hdr *)skb->cb);
+ meshhdrlen = ieee80211_get_mesh_hdrlen(prev_meshhdr);
+ memcpy(&mesh_hdr, prev_meshhdr, meshhdrlen);
+ sdata->u.sta.mshstats.fwded_frames++;
+ } else {
+ if (!sdata->u.sta.mshcfg.dot11MeshTTL) {
+ /* Do not send frames with mesh_ttl == 0 */
+ sdata->u.sta.mshstats.dropped_frames_ttl++;
+ ret = 0;
+ goto fail;
+ }
+ meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr,
+ sdata);
+ }
+ hdrlen = 30;
+ break;
+#endif
case IEEE80211_IF_TYPE_STA:
fc |= IEEE80211_FCTL_TODS;
/* BSSID SA DA */
* EAPOL frames from the local station.
*/
if (unlikely(!is_multicast_ether_addr(hdr.addr1) &&
- !(sta_flags & WLAN_STA_AUTHORIZED) &&
- !(ethertype == ETH_P_PAE &&
+ !(sta_flags & WLAN_STA_AUTHORIZED) &&
+ !(ethertype == ETH_P_PAE &&
compare_ether_addr(dev->dev_addr,
skb->data + ETH_ALEN) == 0))) {
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
* build in headroom in __dev_alloc_skb() (linux/skbuff.h) and
* alloc_skb() (net/core/skbuff.c)
*/
- head_need = hdrlen + encaps_len + local->tx_headroom;
+ head_need = hdrlen + encaps_len + meshhdrlen + local->tx_headroom;
head_need -= skb_headroom(skb);
/* We are going to modify skb data, so make a copy of it if happens to
h_pos += encaps_len;
}
+ if (meshhdrlen > 0) {
+ memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen);
+ nh_pos += meshhdrlen;
+ h_pos += meshhdrlen;
+ }
+
if (fc & IEEE80211_STYPE_QOS_DATA) {
__le16 *qos_control;
read_unlock_bh(&local->sta_lock);
}
+#ifdef CONFIG_MAC80211_MESH
+static struct sk_buff *ieee80211_mesh_beacon_get(struct net_device *dev)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
+ struct ieee80211_mgmt *mgmt;
+ u8 *pos;
+
+ if (!skb)
+ return NULL;
+ skb_reserve(skb, local->hw.extra_tx_headroom);
+ mgmt = (struct ieee80211_mgmt *)
+ skb_put(skb, 24 + sizeof(mgmt->u.beacon));
+ memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon));
+ mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
+ IEEE80211_STYPE_BEACON);
+ memset(mgmt->da, 0xff, ETH_ALEN);
+ memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ /* BSSID is left zeroed, wildcard value */
+ mgmt->u.beacon.beacon_int =
+ cpu_to_le16(local->hw.conf.beacon_int);
+ mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */
+
+ pos = skb_put(skb, 2);
+ *pos++ = WLAN_EID_SSID;
+ *pos++ = 0x0;
+
+ mesh_mgmt_ies_add(skb, dev);
+
+ return skb;
+}
+#endif
+
+
struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_tx_control *control)
struct rate_selection rsel;
struct beacon_data *beacon;
struct ieee80211_supported_band *sband;
+ int *num_beacons;
+ int err = 0;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
sdata = vif_to_sdata(vif);
bdev = sdata->dev;
- ap = &sdata->u.ap;
- beacon = rcu_dereference(ap->beacon);
+ switch (sdata->vif.type) {
+ case IEEE80211_IF_TYPE_AP:
+ ap = &sdata->u.ap;
+ beacon = rcu_dereference(ap->beacon);
+ if (!ap || !beacon) {
+ err = -1;
+ break;
+ }
+
+ /* headroom, head length, tail length and maximum TIM length */
+ skb = dev_alloc_skb(local->tx_headroom + beacon->head_len +
+ beacon->tail_len + 256);
+ if (!skb)
+ goto out;
+
+ skb_reserve(skb, local->tx_headroom);
+ memcpy(skb_put(skb, beacon->head_len), beacon->head,
+ beacon->head_len);
- if (!ap || sdata->vif.type != IEEE80211_IF_TYPE_AP || !beacon) {
+ ieee80211_include_sequence(sdata,
+ (struct ieee80211_hdr *)skb->data);
+
+ ieee80211_beacon_add_tim(local, ap, skb, beacon);
+
+ if (beacon->tail)
+ memcpy(skb_put(skb, beacon->tail_len), beacon->tail,
+ beacon->tail_len);
+
+ num_beacons = &ap->num_beacons;
+ break;
+
+#ifdef CONFIG_MAC80211_MESH
+ case IEEE80211_IF_TYPE_MESH_POINT:
+ skb = ieee80211_mesh_beacon_get(bdev);
+ num_beacons = &sdata->u.sta.num_beacons;
+ break;
+#endif
+
+ default:
+ err = -1;
+ break;
+ }
+
+ if (err) {
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
if (net_ratelimit())
printk(KERN_DEBUG "no beacon data avail for %s\n",
goto out;
}
- /* headroom, head length, tail length and maximum TIM length */
- skb = dev_alloc_skb(local->tx_headroom + beacon->head_len +
- beacon->tail_len + 256);
- if (!skb)
- goto out;
-
- skb_reserve(skb, local->tx_headroom);
- memcpy(skb_put(skb, beacon->head_len), beacon->head,
- beacon->head_len);
-
- ieee80211_include_sequence(sdata, (struct ieee80211_hdr *)skb->data);
-
- ieee80211_beacon_add_tim(local, ap, skb, beacon);
-
- if (beacon->tail)
- memcpy(skb_put(skb, beacon->tail_len), beacon->tail,
- beacon->tail_len);
-
if (control) {
rate_control_get_rate(local->mdev, sband, skb, &rsel);
if (!rsel.rate) {
control->retry_limit = 1;
control->flags |= IEEE80211_TXCTL_CLEAR_PS_FILT;
}
-
- ap->num_beacons++;
-
- out:
+ (*num_beacons)++;
+out:
rcu_read_unlock();
return skb;
}
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff