#define BP_PORT(bp) (bp->pfid & 1)
#define BP_FUNC(bp) (bp->pfid)
#define BP_ABS_FUNC(bp) (bp->pf_num)
-#define BP_E1HVN(bp) (bp->pfid >> 1)
-#define BP_VN(bp) (BP_E1HVN(bp)) /*remove when approved*/
-#define BP_L_ID(bp) (BP_E1HVN(bp) << 2)
-#define BP_FW_MB_IDX(bp) (BP_PORT(bp) +\
- BP_VN(bp) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1))
+#define BP_VN(bp) ((bp)->pfid >> 1)
+#define BP_MAX_VN_NUM(bp) (CHIP_MODE_IS_4_PORT(bp) ? 2 : 4)
+#define BP_L_ID(bp) (BP_VN(bp) << 2)
+#define BP_FW_MB_IDX_VN(bp, vn) (BP_PORT(bp) +\
+ (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1))
+#define BP_FW_MB_IDX(bp) BP_FW_MB_IDX_VN(bp, BP_VN(bp))
struct net_device *dev;
struct pci_dev *pdev;
#define MAX_DMAE_C_PER_PORT 8
#define INIT_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
- BP_E1HVN(bp))
+ BP_VN(bp))
#define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
E1HVN_MAX)
/* must be used on a CID before placing it on a HW ring */
#define HW_CID(bp, x) ((BP_PORT(bp) << 23) | \
- (BP_E1HVN(bp) << BNX2X_SWCID_SHIFT) | \
+ (BP_VN(bp) << BNX2X_SWCID_SHIFT) | \
(x))
#define SP_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_spe))
opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET);
opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
- opcode |= ((BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT) |
- (BP_E1HVN(bp) << DMAE_COMMAND_DST_VN_SHIFT));
+ opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) |
+ (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT));
opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
#ifdef __BIG_ENDIAN
if (!CHIP_IS_E1(bp)) {
/* init leading/trailing edge */
if (IS_MF(bp)) {
- val = (0xee0f | (1 << (BP_E1HVN(bp) + 4)));
+ val = (0xee0f | (1 << (BP_VN(bp) + 4)));
if (bp->port.pmf)
/* enable nig and gpio3 attention */
val |= 0x1100;
/* init leading/trailing edge */
if (IS_MF(bp)) {
- val = (0xee0f | (1 << (BP_E1HVN(bp) + 4)));
+ val = (0xee0f | (1 << (BP_VN(bp) + 4)));
if (bp->port.pmf)
/* enable nig and gpio3 attention */
val |= 0x1100;
int vn;
bp->vn_weight_sum = 0;
- for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+ for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
u32 vn_cfg = bp->mf_config[vn];
u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
}
+/* returns func by VN for current port */
+static inline int func_by_vn(struct bnx2x *bp, int vn)
+{
+ return 2 * vn + BP_PORT(bp);
+}
+
static void bnx2x_init_vn_minmax(struct bnx2x *bp, int vn)
{
struct rate_shaping_vars_per_vn m_rs_vn;
struct fairness_vars_per_vn m_fair_vn;
u32 vn_cfg = bp->mf_config[vn];
- int func = 2*vn + BP_PORT(bp);
+ int func = func_by_vn(bp, vn);
u16 vn_min_rate, vn_max_rate;
int i;
*
* and there are 2 functions per port
*/
- for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+ for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp);
if (func >= E1H_FUNC_MAX)
/* calculate and set min-max rate for each vn */
if (bp->port.pmf)
- for (vn = VN_0; vn < E1HVN_MAX; vn++)
+ for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++)
bnx2x_init_vn_minmax(bp, vn);
/* always enable rate shaping and fairness */
static inline void bnx2x_link_sync_notify(struct bnx2x *bp)
{
- int port = BP_PORT(bp);
int func;
int vn;
/* Set the attention towards other drivers on the same port */
- for (vn = VN_0; vn < E1HVN_MAX; vn++) {
- if (vn == BP_E1HVN(bp))
+ for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
+ if (vn == BP_VN(bp))
continue;
- func = ((vn << 1) | port);
+ func = func_by_vn(bp, vn);
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 +
(LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1);
}
bnx2x_dcbx_pmf_update(bp);
/* enable nig attention */
- val = (0xff0f | (1 << (BP_E1HVN(bp) + 4)));
+ val = (0xff0f | (1 << (BP_VN(bp) + 4)));
if (bp->common.int_block == INT_BLOCK_HC) {
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
if (CHIP_MODE_IS_4_PORT(bp))
dsb_idx = BP_FUNC(bp);
else
- dsb_idx = BP_E1HVN(bp);
+ dsb_idx = BP_VN(bp);
prod_offset = (CHIP_INT_MODE_IS_BC(bp) ?
IGU_BC_BASE_DSB_PROD + dsb_idx :
IGU_NORM_BASE_DSB_PROD + dsb_idx);
+ /*
+ * igu prods come in chunks of E1HVN_MAX (4) -
+ * does not matters what is the current chip mode
+ */
for (i = 0; i < (num_segs * E1HVN_MAX);
i += E1HVN_MAX) {
addr = IGU_REG_PROD_CONS_MEMORY +
u32 val;
/* The mac address is written to entries 1-4 to
preserve entry 0 which is used by the PMF */
- u8 entry = (BP_E1HVN(bp) + 1)*8;
+ u8 entry = (BP_VN(bp) + 1)*8;
val = (mac_addr[0] << 8) | mac_addr[1];
EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp)
{
int pfid = BP_FUNC(bp);
- int vn = BP_E1HVN(bp);
int igu_sb_id;
u32 val;
u8 fid, igu_sb_cnt = 0;
bp->igu_base_sb = 0xff;
if (CHIP_INT_MODE_IS_BC(bp)) {
+ int vn = BP_VN(bp);
igu_sb_cnt = bp->igu_sb_cnt;
bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) *
FP_SB_MAX_E1x;
bp->mf_ov = 0;
bp->mf_mode = 0;
- vn = BP_E1HVN(bp);
+ vn = BP_VN(bp);
if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",