arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver

The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000
speed.

This patch enable the dwmac-sun8i on Allwinner H3/H5 SoC Device-tree.
SoC H3/H5 have an internal PHY, so optionals syscon and ephy are set.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index d9691fc8239aacc5c6237feaef3fd8eb03c790b1..45a9a3003cc6019f37e40c7cbb59576b68b79ca9 100644 (file)
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -285,6 +285,14 @@
                        interrupt-controller;
                        #interrupt-cells = <3>;
 
+                       emac_rgmii_pins: emac0 {
+                               pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+                                      "PD5", "PD7", "PD8", "PD9", "PD10",
+                                      "PD12", "PD13", "PD15", "PD16", "PD17";
+                               function = "emac";
+                               drive-strength = <40>;
+                       };
+
                        i2c0_pins: i2c0 {
                                pins = "PA11", "PA12";
                                function = "i2c0";
@@ -381,6 +389,32 @@
                        clocks = <&osc24M>;
                };
 
+               emac: ethernet@1c30000 {
+                       compatible = "allwinner,sun8i-h3-emac";
+                       syscon = <&syscon>;
+                       reg = <0x01c30000 0x104>;
+                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "macirq";
+                       resets = <&ccu RST_BUS_EMAC>;
+                       reset-names = "stmmaceth";
+                       clocks = <&ccu CLK_BUS_EMAC>;
+                       clock-names = "stmmaceth";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+
+                       mdio: mdio {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               int_mii_phy: ethernet-phy@1 {
+                                       compatible = "ethernet-phy-ieee802.3-c22";
+                                       reg = <1>;
+                                       clocks = <&ccu CLK_BUS_EPHY>;
+                                       resets = <&ccu RST_BUS_EPHY>;
+                               };
+                       };
+               };
+
                spi0: spi@01c68000 {
                        compatible = "allwinner,sun8i-h3-spi";
                        reg = <0x01c68000 0x1000>;