arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig

Most of the drivers are included as modules, except for serial (needed
for early console), WDT (required for reboot), and the dependency
chain of RASPBERRYPI_POWER (which is currently not buildable as a
module, but should be changed).

Signed-off-by: Eric Anholt <eric@anholt.net>

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index dab2cb0c1f1c933e24a3f5e11d1586a26cb14771..bc4eedf49387685ddc78ab12d525328bbbd517a1 100644 (file)
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -34,6 +34,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_BCM2835=y
 CONFIG_ARCH_BCM_IPROC=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_ARCH_EXYNOS=y
@@ -194,6 +195,7 @@ CONFIG_USB_NET_SMSC75XX=m
 CONFIG_USB_NET_SMSC95XX=m
 CONFIG_USB_NET_PLUSB=m
 CONFIG_USB_NET_MCS7830=m
+CONFIG_BRCMFMAC=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SDIO=m
 CONFIG_INPUT_EVDEV=y
@@ -206,6 +208,9 @@ CONFIG_SERIO_AMBAKMI=y
 CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_BCM2835AUX=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_MT6577=y
 CONFIG_SERIAL_8250_UNIPHIER=y
@@ -229,6 +234,7 @@ CONFIG_VIRTIO_CONSOLE=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_BCM2835=m
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_IMX=y
 CONFIG_I2C_MESON=y
@@ -240,6 +246,8 @@ CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_SPI=y
 CONFIG_SPI_MESON_SPIFC=m
+CONFIG_SPI_BCM2835=m
+CONFIG_SPI_BCM2835AUX=m
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_QUP=y
@@ -273,6 +281,7 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_WATCHDOG=y
+CONFIG_BCM2835_WDT=y
 CONFIG_RENESAS_WDT=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_MESON_GXBB_WATCHDOG=m
@@ -295,6 +304,7 @@ CONFIG_REGULATOR_S2MPS11=y
 CONFIG_DRM=m
 CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_TEGRA=m
+CONFIG_DRM_VC4=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_I2C_ADV7511=m
 CONFIG_DRM_HISI_KIRIN=m
@@ -309,6 +319,7 @@ CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
+CONFIG_SND_BCM2835_SOC_I2S=m
 CONFIG_SND_SOC_RCAR=y
 CONFIG_SND_SOC_SAMSUNG=y
 CONFIG_SND_SOC_AK4613=y
@@ -372,6 +383,7 @@ CONFIG_RTC_DRV_XGENE=y
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
 CONFIG_PL330_DMA=y
+CONFIG_DMA_BCM2835=m
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_QCOM_HIDMA_MGMT=y
@@ -394,8 +406,10 @@ CONFIG_MSM_MMCC_8996=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_MAILBOX=y
 CONFIG_ARM_MHU=y
+CONFIG_BCM2835_MBOX=y
 CONFIG_HI6220_MBOX=y
 CONFIG_ARM_SMMU=y
+CONFIG_RASPBERRYPI_POWER=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD=y
 CONFIG_QCOM_SMD_RPM=y
@@ -403,6 +417,7 @@ CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_PWM=y
+CONFIG_PWM_BCM2835=m
 CONFIG_PWM_TEGRA=m
 CONFIG_COMMON_RESET_HI6220=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
@@ -414,6 +429,7 @@ CONFIG_ACPI=y
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
 CONFIG_PWM_SAMSUNG=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y