rt2800: move 53xx specific bbp initialization
authorStanislaw Gruszka <stf_xl@wp.pl>
Sat, 18 May 2013 12:03:55 +0000 (14:03 +0200)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 24 May 2013 17:18:21 +0000 (13:18 -0400)
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/rt2x00/rt2800lib.c

index 527c11478d9da7b9d7d28091c4b238dbac96d25c..ead3a3e746a2c811929157e9338150d30cc3601a 100644 (file)
@@ -4304,6 +4304,10 @@ static void rt2800_init_bbp_3572(struct rt2x00_dev *rt2x00dev)
 
 static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
 {
+       int ant, div_mode;
+       u16 eeprom;
+       u8 value;
+
        rt2800_bbp4_mac_if_ctrl(rt2x00dev);
 
        rt2800_bbp_write(rt2x00dev, 31, 0x08);
@@ -4367,6 +4371,43 @@ static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
        }
 
        rt2800_disable_unused_dac_adc(rt2x00dev);
+
+       rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
+       div_mode = rt2x00_get_field16(eeprom,
+                                     EEPROM_NIC_CONF1_ANT_DIVERSITY);
+       ant = (div_mode == 3) ? 1 : 0;
+
+       /* check if this is a Bluetooth combo card */
+       if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
+               u32 reg;
+
+               rt2800_register_read(rt2x00dev, GPIO_CTRL, &reg);
+               rt2x00_set_field32(&reg, GPIO_CTRL_DIR3, 0);
+               rt2x00_set_field32(&reg, GPIO_CTRL_DIR6, 0);
+               rt2x00_set_field32(&reg, GPIO_CTRL_VAL3, 0);
+               rt2x00_set_field32(&reg, GPIO_CTRL_VAL6, 0);
+               if (ant == 0)
+                       rt2x00_set_field32(&reg, GPIO_CTRL_VAL3, 1);
+               else if (ant == 1)
+                       rt2x00_set_field32(&reg, GPIO_CTRL_VAL6, 1);
+               rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
+       }
+
+       /* This chip has hardware antenna diversity*/
+       if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R)) {
+               rt2800_bbp_write(rt2x00dev, 150, 0); /* Disable Antenna Software OFDM */
+               rt2800_bbp_write(rt2x00dev, 151, 0); /* Disable Antenna Software CCK */
+               rt2800_bbp_write(rt2x00dev, 154, 0); /* Clear previously selected antenna */
+       }
+
+       rt2800_bbp_read(rt2x00dev, 152, &value);
+       if (ant == 0)
+               rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1);
+       else
+               rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0);
+       rt2800_bbp_write(rt2x00dev, 152, value);
+
+       rt2800_init_freq_calibration(rt2x00dev);
 }
 
 static void rt2800_init_bbp_5592(struct rt2x00_dev *rt2x00dev)
@@ -4485,48 +4526,6 @@ static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
                return;
        }
 
-       if (rt2x00_rt(rt2x00dev, RT5390) ||
-           rt2x00_rt(rt2x00dev, RT5392)) {
-               int ant, div_mode;
-
-               rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
-               div_mode = rt2x00_get_field16(eeprom,
-                                             EEPROM_NIC_CONF1_ANT_DIVERSITY);
-               ant = (div_mode == 3) ? 1 : 0;
-
-               /* check if this is a Bluetooth combo card */
-               if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
-                       u32 reg;
-
-                       rt2800_register_read(rt2x00dev, GPIO_CTRL, &reg);
-                       rt2x00_set_field32(&reg, GPIO_CTRL_DIR3, 0);
-                       rt2x00_set_field32(&reg, GPIO_CTRL_DIR6, 0);
-                       rt2x00_set_field32(&reg, GPIO_CTRL_VAL3, 0);
-                       rt2x00_set_field32(&reg, GPIO_CTRL_VAL6, 0);
-                       if (ant == 0)
-                               rt2x00_set_field32(&reg, GPIO_CTRL_VAL3, 1);
-                       else if (ant == 1)
-                               rt2x00_set_field32(&reg, GPIO_CTRL_VAL6, 1);
-                       rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
-               }
-
-               /* This chip has hardware antenna diversity*/
-               if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R)) {
-                       rt2800_bbp_write(rt2x00dev, 150, 0); /* Disable Antenna Software OFDM */
-                       rt2800_bbp_write(rt2x00dev, 151, 0); /* Disable Antenna Software CCK */
-                       rt2800_bbp_write(rt2x00dev, 154, 0); /* Clear previously selected antenna */
-               }
-
-               rt2800_bbp_read(rt2x00dev, 152, &value);
-               if (ant == 0)
-                       rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1);
-               else
-                       rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0);
-               rt2800_bbp_write(rt2x00dev, 152, value);
-
-               rt2800_init_freq_calibration(rt2x00dev);
-       }
-
        for (i = 0; i < EEPROM_BBP_SIZE; i++) {
                rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);