return 0;
}
EXPORT_SYMBOL(mlx4_get_roce_gid_from_slave);
+
+/* Cable Module Info */
+#define MODULE_INFO_MAX_READ 48
+
+#define I2C_ADDR_LOW 0x50
+#define I2C_ADDR_HIGH 0x51
+#define I2C_PAGE_SIZE 256
+
+/* Module Info Data */
+struct mlx4_cable_info {
+ u8 i2c_addr;
+ u8 page_num;
+ __be16 dev_mem_address;
+ __be16 reserved1;
+ __be16 size;
+ __be32 reserved2[2];
+ u8 data[MODULE_INFO_MAX_READ];
+};
+
+enum cable_info_err {
+ CABLE_INF_INV_PORT = 0x1,
+ CABLE_INF_OP_NOSUP = 0x2,
+ CABLE_INF_NOT_CONN = 0x3,
+ CABLE_INF_NO_EEPRM = 0x4,
+ CABLE_INF_PAGE_ERR = 0x5,
+ CABLE_INF_INV_ADDR = 0x6,
+ CABLE_INF_I2C_ADDR = 0x7,
+ CABLE_INF_QSFP_VIO = 0x8,
+ CABLE_INF_I2C_BUSY = 0x9,
+};
+
+#define MAD_STATUS_2_CABLE_ERR(mad_status) ((mad_status >> 8) & 0xFF)
+
+static inline const char *cable_info_mad_err_str(u16 mad_status)
+{
+ u8 err = MAD_STATUS_2_CABLE_ERR(mad_status);
+
+ switch (err) {
+ case CABLE_INF_INV_PORT:
+ return "invalid port selected";
+ case CABLE_INF_OP_NOSUP:
+ return "operation not supported for this port (the port is of type CX4 or internal)";
+ case CABLE_INF_NOT_CONN:
+ return "cable is not connected";
+ case CABLE_INF_NO_EEPRM:
+ return "the connected cable has no EPROM (passive copper cable)";
+ case CABLE_INF_PAGE_ERR:
+ return "page number is greater than 15";
+ case CABLE_INF_INV_ADDR:
+ return "invalid device_address or size (that is, size equals 0 or address+size is greater than 256)";
+ case CABLE_INF_I2C_ADDR:
+ return "invalid I2C slave address";
+ case CABLE_INF_QSFP_VIO:
+ return "at least one cable violates the QSFP specification and ignores the modsel signal";
+ case CABLE_INF_I2C_BUSY:
+ return "I2C bus is constantly busy";
+ }
+ return "Unknown Error";
+}
+
+/**
+ * mlx4_get_module_info - Read cable module eeprom data
+ * @dev: mlx4_dev.
+ * @port: port number.
+ * @offset: byte offset in eeprom to start reading data from.
+ * @size: num of bytes to read.
+ * @data: output buffer to put the requested data into.
+ *
+ * Reads cable module eeprom data, puts the outcome data into
+ * data pointer paramer.
+ * Returns num of read bytes on success or a negative error
+ * code.
+ */
+int mlx4_get_module_info(struct mlx4_dev *dev, u8 port,
+ u16 offset, u16 size, u8 *data)
+{
+ struct mlx4_cmd_mailbox *inbox, *outbox;
+ struct mlx4_mad_ifc *inmad, *outmad;
+ struct mlx4_cable_info *cable_info;
+ u16 i2c_addr;
+ int ret;
+
+ if (size > MODULE_INFO_MAX_READ)
+ size = MODULE_INFO_MAX_READ;
+
+ inbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(inbox))
+ return PTR_ERR(inbox);
+
+ outbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(outbox)) {
+ mlx4_free_cmd_mailbox(dev, inbox);
+ return PTR_ERR(outbox);
+ }
+
+ inmad = (struct mlx4_mad_ifc *)(inbox->buf);
+ outmad = (struct mlx4_mad_ifc *)(outbox->buf);
+
+ inmad->method = 0x1; /* Get */
+ inmad->class_version = 0x1;
+ inmad->mgmt_class = 0x1;
+ inmad->base_version = 0x1;
+ inmad->attr_id = cpu_to_be16(0xFF60); /* Module Info */
+
+ if (offset < I2C_PAGE_SIZE && offset + size > I2C_PAGE_SIZE)
+ /* Cross pages reads are not allowed
+ * read until offset 256 in low page
+ */
+ size -= offset + size - I2C_PAGE_SIZE;
+
+ i2c_addr = I2C_ADDR_LOW;
+ if (offset >= I2C_PAGE_SIZE) {
+ /* Reset offset to high page */
+ i2c_addr = I2C_ADDR_HIGH;
+ offset -= I2C_PAGE_SIZE;
+ }
+
+ cable_info = (struct mlx4_cable_info *)inmad->data;
+ cable_info->dev_mem_address = cpu_to_be16(offset);
+ cable_info->page_num = 0;
+ cable_info->i2c_addr = i2c_addr;
+ cable_info->size = cpu_to_be16(size);
+
+ ret = mlx4_cmd_box(dev, inbox->dma, outbox->dma, port, 3,
+ MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C,
+ MLX4_CMD_NATIVE);
+ if (ret)
+ goto out;
+
+ if (be16_to_cpu(outmad->status)) {
+ /* Mad returned with bad status */
+ ret = be16_to_cpu(outmad->status);
+ mlx4_warn(dev,
+ "MLX4_CMD_MAD_IFC Get Module info attr(%x) port(%d) i2c_addr(%x) offset(%d) size(%d): Response Mad Status(%x) - %s\n",
+ 0xFF60, port, i2c_addr, offset, size,
+ ret, cable_info_mad_err_str(ret));
+
+ if (i2c_addr == I2C_ADDR_HIGH &&
+ MAD_STATUS_2_CABLE_ERR(ret) == CABLE_INF_I2C_ADDR)
+ /* Some SFP cables do not support i2c slave
+ * address 0x51 (high page), abort silently.
+ */
+ ret = 0;
+ else
+ ret = -ret;
+ goto out;
+ }
+ cable_info = (struct mlx4_cable_info *)outmad->data;
+ memcpy(data, cable_info->data, size);
+ ret = size;
+out:
+ mlx4_free_cmd_mailbox(dev, inbox);
+ mlx4_free_cmd_mailbox(dev, outbox);
+ return ret;
+}
+EXPORT_SYMBOL(mlx4_get_module_info);
#define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \
MLX4_EQ_PORT_INFO_MSTR_SM_LID_CHANGE_MASK)
+enum mlx4_module_id {
+ MLX4_MODULE_ID_SFP = 0x3,
+ MLX4_MODULE_ID_QSFP = 0xC,
+ MLX4_MODULE_ID_QSFP_PLUS = 0xD,
+ MLX4_MODULE_ID_QSFP28 = 0x11,
+};
+
static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor)
{
return (major << 32) | (minor << 16) | subminor;
u64 si_guid;
};
+#define MAD_IFC_DATA_SZ 192
+/* MAD IFC Mailbox */
+struct mlx4_mad_ifc {
+ u8 base_version;
+ u8 mgmt_class;
+ u8 class_version;
+ u8 method;
+ __be16 status;
+ __be16 class_specific;
+ __be64 tid;
+ __be16 attr_id;
+ __be16 resv;
+ __be32 attr_mod;
+ __be64 mkey;
+ __be16 dr_slid;
+ __be16 dr_dlid;
+ u8 reserved[28];
+ u8 data[MAD_IFC_DATA_SZ];
+} __packed;
+
#define mlx4_foreach_port(port, dev, type) \
for ((port) = 1; (port) <= (dev)->caps.num_ports; (port)++) \
if ((type) == (dev)->caps.port_mask[(port)])
u64 iova, u64 size, int npages,
int page_shift, struct mlx4_mpt_entry *mpt_entry);
+int mlx4_get_module_info(struct mlx4_dev *dev, u8 port,
+ u16 offset, u16 size, u8 *data);
+
/* Returns true if running in low memory profile (kdump kernel) */
static inline bool mlx4_low_memory_profile(void)
{
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff