ARM: dts: imx: ventana: use gpio constants

Use the gpio contants defined in bindings for active high/low

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 035f2b17f3863511e6cd3c08f018407b666a3f3d..9687cd82c2b612198b8b26f190e6d318b26e6a83 100644 (file)
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -10,6 +10,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -40,20 +41,20 @@
 
                led0: user1 {
                        label = "user1";
-                       gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+                       gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
                        default-state = "on";
                        linux,default-trigger = "heartbeat";
                };
 
                led1: user2 {
                        label = "user2";
-                       gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
+                       gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
                        default-state = "off";
                };
 
                led2: user3 {
                        label = "user3";
-                       gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+                       gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
                        default-state = "off";
                };
        };
@@ -64,7 +65,7 @@
 
        pps {
                compatible = "pps-gpio";
-               gpios = <&gpio1 5 0>;
+               gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 
@@ -106,7 +107,7 @@
                        regulator-name = "usb_otg_vbus";
                        regulator-min-microvolt = <5000000>;
                        regulator-max-microvolt = <5000000>;
-                       gpio = <&gpio3 22 0>;
+                       gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
                        enable-active-high;
                };
        };
@@ -134,7 +135,7 @@
 
 &ecspi1 {
        fsl,spi-num-chipselects = <1>;
-       cs-gpios = <&gpio3 19 0>;
+       cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_ecspi1>;
        status = "okay";
@@ -150,7 +151,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_enet>;
        phy-mode = "rgmii";
-       phy-reset-gpios = <&gpio1 30 0>;
+       phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
 
@@ -331,8 +332,8 @@
                compatible = "eeti,egalax_ts";
                reg = <0x04>;
                interrupt-parent = <&gpio7>;
-               interrupts = <12 2>; /* gpio7_12 active low */
-               wakeup-gpios = <&gpio7 12 0>;
+               interrupts = <12 2>;
+               wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
        };
 };
 
@@ -462,7 +463,7 @@
 };
 
 &pcie {
-       reset-gpio = <&gpio1 29 0>;
+       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
        status = "okay";
 
        eth1: sky2@8 { /* MAC/PHY on bus 8 */
@@ -508,7 +509,7 @@
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
-       cd-gpios = <&gpio7 0 0>;
+       cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };

diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 482ef28885a1d4aecbba0c647e6ac021dbee4e24..fa2cae4d57d0a87854b604a484f3f86ac8f5d467 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -9,6 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        /* these are used by bootloader for disabling nodes */
        aliases {
@@ -28,14 +30,14 @@
 
                led0: user1 {
                        label = "user1";
-                       gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+                       gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
                        default-state = "on";
                        linux,default-trigger = "heartbeat";
                };
 
                led1: user2 {
                        label = "user2";
-                       gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+                       gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
                        default-state = "off";
                };
        };
@@ -46,7 +48,7 @@
 
        pps {
                compatible = "pps-gpio";
-               gpios = <&gpio1 26 0>;
+               gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 
@@ -79,7 +81,7 @@
                        regulator-name = "usb_otg_vbus";
                        regulator-min-microvolt = <5000000>;
                        regulator-max-microvolt = <5000000>;
-                       gpio = <&gpio3 22 0>;
+                       gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
                        enable-active-high;
                };
        };
@@ -89,7 +91,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_enet>;
        phy-mode = "rgmii";
-       phy-reset-gpios = <&gpio1 30 0>;
+       phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
 
@@ -279,7 +281,7 @@
 };
 
 &pcie {
-       reset-gpio = <&gpio1 0 0>;
+       reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
 

diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index f8c4ab492d8e42718ee07d00cb75d21e678ec4b8..53f4a0bd53ba47e6a59d5b423802c1d618f26875 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -9,6 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        /* these are used by bootloader for disabling nodes */
        aliases {
@@ -37,20 +39,20 @@
 
                led0: user1 {
                        label = "user1";
-                       gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+                       gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
                        default-state = "on";
                        linux,default-trigger = "heartbeat";
                };
 
                led1: user2 {
                        label = "user2";
-                       gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+                       gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
                        default-state = "off";
                };
 
                led2: user3 {
                        label = "user3";
-                       gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
+                       gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
                        default-state = "off";
                };
        };
@@ -61,7 +63,7 @@
 
        pps {
                compatible = "pps-gpio";
-               gpios = <&gpio1 26 0>;
+               gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 
@@ -113,7 +115,7 @@
                        regulator-name = "usb_otg_vbus";
                        regulator-min-microvolt = <5000000>;
                        regulator-max-microvolt = <5000000>;
-                       gpio = <&gpio3 22 0>;
+                       gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
                        enable-active-high;
                };
        };
@@ -143,7 +145,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_enet>;
        phy-mode = "rgmii";
-       phy-reset-gpios = <&gpio1 30 0>;
+       phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
 
@@ -226,8 +228,8 @@
                compatible = "eeti,egalax_ts";
                reg = <0x04>;
                interrupt-parent = <&gpio7>;
-               interrupts = <12 2>; /* gpio7_12 active low */
-               wakeup-gpios = <&gpio7 12 0>;
+               interrupts = <12 2>;
+               wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
        };
 };
 
@@ -402,7 +404,7 @@
 };
 
 &pcie {
-       reset-gpio = <&gpio1 29 0>;
+       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
 
@@ -449,7 +451,7 @@
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
-       cd-gpios = <&gpio7 0 0>;
+       cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };

diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 01edfd9970136a1f9bdece684e8973c3b1ac217a..2074df6f8095dbbff5b0717de600cc38aa4dd54a 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -9,6 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        /* these are used by bootloader for disabling nodes */
        aliases {
@@ -38,20 +40,20 @@
 
                led0: user1 {
                        label = "user1";
-                       gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+                       gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
                        default-state = "on";
                        linux,default-trigger = "heartbeat";
                };
 
                led1: user2 {
                        label = "user2";
-                       gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+                       gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
                        default-state = "off";
                };
 
                led2: user3 {
                        label = "user3";
-                       gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+                       gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
                        default-state = "off";
                };
        };
@@ -62,7 +64,7 @@
 
        pps {
                compatible = "pps-gpio";
-               gpios = <&gpio1 26 0>;
+               gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 
@@ -114,7 +116,7 @@
                        regulator-name = "usb_otg_vbus";
                        regulator-min-microvolt = <5000000>;
                        regulator-max-microvolt = <5000000>;
-                       gpio = <&gpio3 22 0>;
+                       gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
                        enable-active-high;
                };
        };
@@ -150,7 +152,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_enet>;
        phy-mode = "rgmii";
-       phy-reset-gpios = <&gpio1 30 0>;
+       phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
 
@@ -233,8 +235,8 @@
                compatible = "eeti,egalax_ts";
                reg = <0x04>;
                interrupt-parent = <&gpio1>;
-               interrupts = <11 2>; /* gpio1_11 active low */
-               wakeup-gpios = <&gpio1 11 0>;
+               interrupts = <11 2>;
+               wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
        };
 };
 
@@ -418,7 +420,7 @@
 };
 
 &pcie {
-       reset-gpio = <&gpio1 29 0>;
+       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
        status = "okay";
 
        eth1: sky2@8 { /* MAC/PHY on bus 8 */
@@ -470,7 +472,7 @@
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
-       cd-gpios = <&gpio7 0 0>;
+       cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };

diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index fab9c7a8f878f4e266db8936f5910c715b42593f..ab7827abd71bced07ed92d2c6a43c15b4192dd1c 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -9,6 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        /* these are used by bootloader for disabling nodes */
        aliases {
@@ -38,20 +40,20 @@
 
                led0: user1 {
                        label = "user1";
-                       gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+                       gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
                        default-state = "on";
                        linux,default-trigger = "heartbeat";
                };
 
                led1: user2 {
                        label = "user2";
-                       gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+                       gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
                        default-state = "off";
                };
 
                led2: user3 {
                        label = "user3";
-                       gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+                       gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
                        default-state = "off";
                };
        };
@@ -62,7 +64,7 @@
 
        pps {
                compatible = "pps-gpio";
-               gpios = <&gpio1 26 0>;
+               gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
 
@@ -104,7 +106,7 @@
                        regulator-name = "usb_otg_vbus";
                        regulator-min-microvolt = <5000000>;
                        regulator-max-microvolt = <5000000>;
-                       gpio = <&gpio3 22 0>;
+                       gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
                        enable-active-high;
                };
        };
@@ -140,7 +142,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_enet>;
        phy-mode = "rgmii";
-       phy-reset-gpios = <&gpio1 30 0>;
+       phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
 
@@ -322,8 +324,8 @@
                compatible = "eeti,egalax_ts";
                reg = <0x04>;
                interrupt-parent = <&gpio7>;
-               interrupts = <12 2>; /* gpio7_12 active low */
-               wakeup-gpios = <&gpio7 12 0>;
+               interrupts = <12 2>;
+               wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
        };
 };
 
@@ -501,7 +503,7 @@
 };
 
 &pcie {
-       reset-gpio = <&gpio1 29 0>;
+       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
        status = "okay";
 
        eth1: sky2@8 { /* MAC/PHY on bus 8 */
@@ -557,7 +559,7 @@
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
-       cd-gpios = <&gpio7 0 0>;
+       cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };