ARM: sa11x0: badge4: move board specific ohci initialization to badge4.c

Move the handling of the 5v supply into badge4.c, removing this board
specific detail from the sa1111 ohci driver.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b07a2c024cb78682d944d025e6fb7c26c349c097..d84924993bad4056e2c6fc0d09c7977f263e88fc 100644 (file)
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -51,8 +51,23 @@ static struct resource sa1111_resources[] = {
        },
 };
 
+static int badge4_sa1111_enable(void *data, unsigned devid)
+{
+       if (devid == SA1111_DEVID_USB)
+               badge4_set_5V(BADGE4_5V_USB, 1);
+       return 0;
+}
+
+static void badge4_sa1111_disable(void *data, unsigned devid)
+{
+       if (devid == SA1111_DEVID_USB)
+               badge4_set_5V(BADGE4_5V_USB, 0);
+}
+
 static struct sa1111_platform_data sa1111_info = {
        .irq_base       = IRQ_BOARD_END,
+       .enable         = badge4_sa1111_enable,
+       .disable        = badge4_sa1111_disable,
 };
 
 static u64 sa1111_dmamask = 0xffffffffUL;

diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index f61f4f90529edd80847c5752bafbd977b961c73b..48300080433c6d7b4b690f1c521928f1158196da 100644 (file)
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -16,7 +16,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/assabet.h>
-#include <mach/badge4.h>
 #include <asm/hardware/sa1111.h>
 
 #ifndef CONFIG_SA1111
@@ -35,12 +34,6 @@ static int sa1111_start_hc(struct sa1111_dev *dev)
        printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n",
               __FILE__);
 
-#ifdef CONFIG_SA1100_BADGE4
-       if (machine_is_badge4()) {
-               badge4_set_5V(BADGE4_5V_USB, 1);
-       }
-#endif
-
        if (machine_is_xp860() ||
            machine_has_neponset() ||
            machine_is_pfs168() ||
@@ -84,13 +77,6 @@ static void sa1111_stop_hc(struct sa1111_dev *dev)
         * Stop the USB clock.
         */
        sa1111_disable_device(dev);
-
-#ifdef CONFIG_SA1100_BADGE4
-       if (machine_is_badge4()) {
-               /* Disable power to the USB bus */
-               badge4_set_5V(BADGE4_5V_USB, 0);
-       }
-#endif
 }