.align 4
-sun4_notsup:
- .asciz "Sparc-Linux sun4 support does no longer exist.\n\n"
+sun4c_notsup:
+ .asciz "Sparc-Linux sun4/sun4c support does no longer exist.\n\n"
.align 4
sun4e_notsup:
ldd [%g2 + 0x8], %g4
std %g4, [%g3 + 0x8] ! Copy proms handler
-/* Must determine whether we are on a sun4c MMU, SRMMU, or SUN4/400 MUTANT
- * MMU so we can remap ourselves properly. DON'T TOUCH %l0 thru %l5 in these
- * remapping routines, we need their values afterwards!
+/* DON'T TOUCH %l0 thru %l5 in these remapping routines,
+ * we need their values afterwards!
*/
+
/* Now check whether we are already mapped, if we
* are we can skip all this garbage coming up.
*/
be go_to_highmem ! this will be a nop then
nop
- set LOAD_ADDR, %g6
- cmp %g7, %g6
- bne remap_not_a_sun4 ! This is not a Sun4
- nop
-
- or %g0, 0x1, %g1
- lduba [%g1] ASI_CONTROL, %g1 ! Only safe to try on Sun4.
- subcc %g1, 0x24, %g0 ! Is this a mutant Sun4/400???
- be sun4_mutant_remap ! Ugh, it is...
- nop
-
- b sun4_normal_remap ! regular sun4, 2 level mmu
- nop
-
-remap_not_a_sun4:
- lda [%g0] ASI_M_MMUREGS, %g1 ! same as ASI_PTE on sun4c
- and %g1, 0x1, %g1 ! Test SRMMU Enable bit ;-)
- cmp %g1, 0x0
- be sun4c_remap ! A sun4c MMU or normal Sun4
- nop
srmmu_remap:
/* First, check for a viking (TI) module. */
set 0x40000000, %g2
b go_to_highmem
nop ! wheee....
- /* This remaps the kernel on Sun4/4xx machines
- * that have the Sun Mutant Three Level MMU.
- * It's like a platypus, Sun didn't have the
- * SRMMU in conception so they kludged the three
- * level logic in the regular Sun4 MMU probably.
- *
- * Basically, you take each entry in the top level
- * directory that maps the low 3MB starting at
- * address zero and put the mapping in the KERNBASE
- * slots. These top level pgd's are called regmaps.
- */
-sun4_mutant_remap:
- or %g0, %g0, %g3 ! source base
- sethi %hi(KERNBASE), %g4 ! destination base
- or %g4, %lo(KERNBASE), %g4
- sethi %hi(0x300000), %g5
- or %g5, %lo(0x300000), %g5 ! upper bound 3MB
- or %g0, 0x1, %l6
- sll %l6, 24, %l6 ! Regmap mapping size
- add %g3, 0x2, %g3 ! Base magic
- add %g4, 0x2, %g4 ! Base magic
-
- /* Main remapping loop on Sun4-Mutant-MMU.
- * "I am not an animal..." -Famous Mutant Person
- */
-sun4_mutant_loop:
- lduha [%g3] ASI_REGMAP, %g2 ! Get lower entry
- stha %g2, [%g4] ASI_REGMAP ! Store in high entry
- add %g4, %l6, %g4 ! Move up high memory ptr
- subcc %g3, %g5, %g0 ! Reached our limit?
- blu sun4_mutant_loop ! Nope, loop again
- add %g3, %l6, %g3 ! delay, Move up low ptr
- b go_to_highmem ! Jump to high memory.
- nop
-
- /* The following is for non-4/4xx sun4 MMU's. */
-sun4_normal_remap:
- mov 0, %g3 ! source base
- set KERNBASE, %g4 ! destination base
- set 0x300000, %g5 ! upper bound 3MB
- mov 1, %l6
- sll %l6, 18, %l6 ! sun4 mmu segmap size
-sun4_normal_loop:
- lduha [%g3] ASI_SEGMAP, %g6 ! load phys_seg
- stha %g6, [%g4] ASI_SEGMAP ! stort new virt mapping
- add %g3, %l6, %g3 ! increment source pointer
- subcc %g3, %g5, %g0 ! reached limit?
- blu sun4_normal_loop ! nope, loop again
- add %g4, %l6, %g4 ! delay, increment dest ptr
- b go_to_highmem
- nop
-
- /* The following works for Sun4c MMU's */
-sun4c_remap:
- mov 0, %g3 ! source base
- set KERNBASE, %g4 ! destination base
- set 0x300000, %g5 ! upper bound 3MB
- mov 1, %l6
- sll %l6, 18, %l6 ! sun4c mmu segmap size
-sun4c_remap_loop:
- lda [%g3] ASI_SEGMAP, %g6 ! load phys_seg
- sta %g6, [%g4] ASI_SEGMAP ! store new virt mapping
- add %g3, %l6, %g3 ! Increment source ptr
- subcc %g3, %g5, %g0 ! Reached limit?
- bl sun4c_remap_loop ! Nope, loop again
- add %g4, %l6, %g4 ! delay, Increment dest ptr
/* Now do a non-relative jump so that PC is in high-memory */
go_to_highmem:
be found_version
nop
-/* Old sun4's pass our load address into %o0 instead of the prom
- * pointer. On sun4's you have to hard code the romvec pointer into
- * your code. Sun probably still does that because they don't even
- * trust their own "OpenBoot" specifications.
- */
- set LOAD_ADDR, %g6
- cmp %o0, %g6 ! an old sun4?
- be sun4_init
- nop
-
found_version:
/* Get the machine type via the mysterious romvec node operations. */
/* Update boot_cpu_id only on boot cpu */
stub %g1, [%g2 + %lo(boot_cpu_id)]
- ba sun4c_continue_boot
+ ba continue_boot
nop
#endif
set cputypval, %o2
ldub [%o2 + 0x4], %l1
cmp %l1, ' '
- be 1f
+ be no_sun4c_here
cmp %l1, 'c'
- be 1f
+ be no_sun4c_here
cmp %l1, 'm'
be 1f
cmp %l1, 's'
1: set cputypval, %l1
ldub [%l1 + 0x4], %l1
- cmp %l1, 'm' ! Test for sun4d, sun4e ?
- be sun4m_init
- cmp %l1, 's' ! Treat sun4s as sun4m
- be sun4m_init
- cmp %l1, 'd' ! Let us see how the beast will die
+ cmp %l1, 'd' ! Let us see how the beast will die
be sun4d_init
nop
- /* Jump into mmu context zero. */
- set AC_CONTEXT, %g1
- stba %g0, [%g1] ASI_CONTROL
-
- b sun4c_continue_boot
+ /* If not sun4d assume sun4m */
+ b sun4m_init
nop
/* CPUID in bootbus can be found at PA 0xff0140000 */
srl %o1, 28, %o1 ! Get a type of the CPU
subcc %o1, 4, %g0 ! TI: Viking or MicroSPARC
- be sun4c_continue_boot
+ be continue_boot
nop
set AC_M_SFSR, %o0
/* Fujitsu MicroSPARC-II has no asynchronous flavors of FARs */
subcc %o1, 0, %g0
- be sun4c_continue_boot
+ be continue_boot
nop
set AC_M_AFSR, %o0
nop
-sun4c_continue_boot:
-
+continue_boot:
/* Aieee, now set PC and nPC, enable traps, give ourselves a stack and it's
* show-time!
/* We should not get here. */
call halt_me
nop
-
-sun4_init:
- sethi %hi(SUN4_PROM_VECTOR+0x84), %o1
- ld [%o1 + %lo(SUN4_PROM_VECTOR+0x84)], %o1
- set sun4_notsup, %o0
- call %o1 /* printf */
- nop
- sethi %hi(SUN4_PROM_VECTOR+0xc4), %o1
- ld [%o1 + %lo(SUN4_PROM_VECTOR+0xc4)], %o1
- call %o1 /* exittomon */
+no_sun4c_here:
+ ld [%g7 + 0x68], %o1
+ set sun4c_notsup, %o0
+ call %o1
nop
-1: ba 1b ! Cannot exit into KMON
+ b halt_me
nop
no_sun4e_here:
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff