ARM: OMAP3+: PM: VP: fix integer truncation error

commit 2f34ce81b8c05c900e45bd88595cc154f7bb5957
(OMAP3: PM: Adding voltage driver support.)
introduced runtime computation of waittime to handle all potential
sys clocks available.

In the voltage processor, the SPMSUpdateWait is calculated based on
the slew rate and the voltage step (SMPSUpdateWait = slew rate *
Voltage Step). After the voltage processor receives the SMPS_Ack
signal, the Voltage Controller will wait for SMPSUpdateWait clock
cycles for the voltage to settle to the new value. For all
practical purposes, the waittime parameter is the OMAP hardware
translation of what the slew rate on the PMIC is.

As an example, with TPS62361 on OMAP4460,
step_size = 10000
slew_rate = 32000
sys_clk_rate = 38400

Our current computation results in the following:
 = ((step_size / slew_rate) * sys_clk_rate) / 1000
 = ((10000 / 32000) * 38400 / 1000
 = 0

Fix the same using DIV_ROUND_UP as an extra wait clock cycle
is better than lesser clock cycle. For the above example, this
translates to:
 = (10000 * 38400) / (1000 * 32000)
 = 12

Acked-by: Jon Hunter <jon-hunter@ti.com>
[nm@ti.com: slightly better implementation]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yuan Jiangli <jlyuan@motorola.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index 0df88820978d5d509ded718d3311659e8ab079d4..f95c1bad9dc6363a573fee56f6addaa17a0accfd 100644 (file)
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -61,8 +61,8 @@ void __init omap_vp_init(struct voltagedomain *voltdm)
        vddmin = voltdm->pmic->vp_vddmin;
        vddmax = voltdm->pmic->vp_vddmax;
 
-       waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) *
-                   sys_clk_rate) / 1000;
+       waittime = DIV_ROUND_UP(voltdm->pmic->step_size * sys_clk_rate,
+                               1000 * voltdm->pmic->slew_rate);
        vstepmin = voltdm->pmic->vp_vstepmin;
        vstepmax = voltdm->pmic->vp_vstepmax;