#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
-/*
- * Calibration control struct.
+/**
+ * struct iwl_tlv_calib_ctrl - Calibration control struct.
* Sent as part of the phy configuration command.
* @flow_trigger: bitmap for which calibrations to perform according to
* flow triggers.
* Threshold. Typical energy threshold is -72dBm.
* @bf_temp_threshold: This threshold determines the type of temperature
* filtering (Slow or Fast) that is selected (Units are in Celsuis):
- * If the current temperature is above this threshold - Fast filter
+ * If the current temperature is above this threshold - Fast filter
* will be used, If the current temperature is below this threshold -
* Slow filter will be used.
* @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values
/**
* struct iwl_rx_mpdu_res_start - phy info
- * @assist: see CSUM_RX_ASSIST_ above
+ * @byte_count: byte count of the frame
+ * @assist: see &enum iwl_csum_rx_assist_info
*/
struct iwl_rx_mpdu_res_start {
__le16 byte_count;
} __packed; /* MULTI_QUEUE_DRV_SYNC_HDR_CMD_API_S_VER_1 */
/**
- * Internal message identifier
+ * enum iwl_mvm_rxq_notif_type - Internal message identifier
*
* @IWL_MVM_RXQ_EMPTY: empty sync notification
* @IWL_MVM_RXQ_NOTIF_DEL_BA: notify RSS queues of delBA
/**
* struct iwl_mvm_pm_state_notification - station PM state notification
* @sta_id: station ID of the station changing state
- * @type: the new powersave state, see IWL_MVM_PM_EVENT_ above
+ * @type: the new powersave state, see &enum iwl_mvm_pm_event
*/
struct iwl_mvm_pm_state_notification {
u8 sta_id;
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
- * Copyright(c) 2016 Intel Deutschland GmbH
+ * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
};
/**
- * iwl_scan_offload_blacklist - SCAN_OFFLOAD_BLACKLIST_S
+ * struct iwl_scan_offload_blacklist - SCAN_OFFLOAD_BLACKLIST_S
* @ssid: MAC address to filter out
* @reported_rssi: AP rssi reported to the host
* @client_bitmap: clients ignore this entry - enum scan_framework_client
};
/**
- * iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S
+ * struct iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S
* @ssid_index: index to ssid list in fixed part
* @unicast_cipher: encryption algorithm to match - bitmap
* @aut_alg: authentication algorithm to match - bitmap
} __packed;
/**
- * iwl_scan_offload_profile_cfg - SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1
- * @blaclist: AP list to filter off from scan results
+ * struct iwl_scan_offload_profile_cfg - SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1
* @profiles: profiles to search for match
* @blacklist_len: length of blacklist
* @num_profiles: num of profiles in the list
} __packed;
/**
- * iwl_scan_schedule_lmac - schedule of scan offload
+ * struct iwl_scan_schedule_lmac - schedule of scan offload
* @delay: delay between iterations, in seconds.
* @iterations: num of scan iterations
* @full_scan_mul: number of partial scans before each full scan
};
/**
- * iwl_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S
+ * struct iwl_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S
* @tx_flags: combination of TX_CMD_FLG_*
* @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
* cleared. Combination of RATE_MCS_*
};
/**
- * iwl_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2
+ * struct iwl_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2
* @flags: bits 1-20: directed scan to i'th ssid
* other bits &enum iwl_scan_channel_flags_lmac
* @channel_number: channel number 1-13 etc
} __packed;
/*
- * iwl_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1
+ * struct iwl_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1
* @offset: offset in the data block
* @len: length of the segment
*/
IWL_SCAN_CHANNEL_FLAG_CACHE_ADD = BIT(2),
};
-/* iwl_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S
+/* struct iwl_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S
* @flags: enum iwl_scan_channel_flags
* @non_ebs_ratio: defines the ratio of number of scan iterations where EBS is
* involved.
} __packed;
/**
- * iwl_mvm_lmac_scan_flags
+ * enum iwl_mvm_lmac_scan_flags - LMAC scan flags
* @IWL_MVM_LMAC_SCAN_FLAG_PASS_ALL: pass all beacons and probe responses
* without filtering.
* @IWL_MVM_LMAC_SCAN_FLAG_PASSIVE: force passive scan on all channels
};
/**
- * iwl_scan_req_lmac - SCAN_REQUEST_CMD_API_S_VER_1
+ * struct iwl_scan_req_lmac - SCAN_REQUEST_CMD_API_S_VER_1
* @reserved1: for alignment and future use
* @channel_num: num of channels to scan
* @active-dwell: dwell time for active channels
} __packed;
/**
- * iwl_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2
+ * struct iwl_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2
* @last_schedule_line: last schedule line executed (fast or regular)
* @last_schedule_iteration: last scan iteration executed before scan abort
* @status: enum iwl_scan_offload_complete_status
} __packed; /* SCAN_CONFIG_DB_CMD_API_S_3 */
/**
- * iwl_umac_scan_flags
- *@IWL_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request
+ * enum iwl_umac_scan_flags - UMAC scan flags
+ * @IWL_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request
* can be preempted by other scan requests with higher priority.
* The low priority scan will be resumed when the higher proirity scan is
* completed.
- *@IWL_UMAC_SCAN_FLAG_START_NOTIF: notification will be sent to the driver
+ * @IWL_UMAC_SCAN_FLAG_START_NOTIF: notification will be sent to the driver
* when scan starts.
*/
enum iwl_umac_scan_flags {
/**
* struct iwl_mvm_keyinfo - key information
- * @key_flags: type %iwl_sta_key_flag
+ * @key_flags: type &enum iwl_sta_key_flag
* @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection
* @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx
* @key_offset: key offset in the fw's key table
* @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable
* AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field.
* @mac_id_n_color: the Mac context this station belongs to
- * @addr[ETH_ALEN]: station's MAC address
+ * @addr: station's MAC address
* @sta_id: index of station in uCode's station table
* @modify_mask: STA_MODIFY_*, selects which parameters to modify vs. leave
* alone. 1 - modify, 0 - don't change.
- * @station_flags: look at %iwl_sta_flags
- * @station_flags_msk: what of %station_flags have changed
+ * @station_flags: look at &enum iwl_sta_flags
+ * @station_flags_msk: what of %station_flags have changed,
+ * also &enum iwl_sta_flags
* @add_immediate_ba_tid: tid for which to add block-ack support (Rx)
* Set %STA_MODIFY_ADD_BA_TID to use this field, and also set
* add_immediate_ba_ssn.
* @sleep_tx_count: number of packets to transmit to station even though it is
* asleep. Used to synchronise PS-poll and u-APSD responses while ucode
* keeps track of STA sleep state.
- * @sleep_state_flags: Look at %iwl_sta_sleep_flag.
+ * @sleep_state_flags: Look at &enum iwl_sta_sleep_flag.
* @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP
* mac-addr.
* @beamform_flags: beam forming controls
* @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable
* AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field.
* @mac_id_n_color: the Mac context this station belongs to
- * @addr[ETH_ALEN]: station's MAC address
+ * @addr: station's MAC address
* @sta_id: index of station in uCode's station table
* @modify_mask: STA_MODIFY_*, selects which parameters to modify vs. leave
* alone. 1 - modify, 0 - don't change.
- * @station_flags: look at %iwl_sta_flags
- * @station_flags_msk: what of %station_flags have changed
+ * @station_flags: look at &enum iwl_sta_flags
+ * @station_flags_msk: what of %station_flags have changed,
+ * also &enum iwl_sta_flags
* @add_immediate_ba_tid: tid for which to add block-ack support (Rx)
* Set %STA_MODIFY_ADD_BA_TID to use this field, and also set
* add_immediate_ba_ssn.
* asleep. Used to synchronise PS-poll and u-APSD responses while ucode
* keeps track of STA sleep state.
* @station_type: type of this station. See &enum iwl_sta_type.
- * @sleep_state_flags: Look at %iwl_sta_sleep_flag.
+ * @sleep_state_flags: Look at &enum iwl_sta_sleep_flag.
* @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP
* mac-addr.
* @beamform_flags: beam forming controls
* ( REPLY_ADD_STA_KEY = 0x17 )
* @sta_id: index of station in uCode's station table
* @key_offset: key offset in key storage
- * @key_flags: type %iwl_sta_key_flag
+ * @key_flags: type &enum iwl_sta_key_flag
* @key: key material data
* @rx_secur_seq_cnt: RX security sequence counter for the key
*/
* struct iwl_mvm_ba_notif - notifies about reception of BA
* ( BA_NOTIF = 0xc5 )
* @sta_addr: MAC address
+ * @reserved: reserved
* @sta_id: Index of recipient (BA-sending) station in fw's station table
* @tid: tid of the session
- * @seq_ctl:
+ * @seq_ctl: sequence control field
* @bitmap: the bitmap of the BA notification as seen in the air
* @scd_flow: the tx queue this BA relates to
* @scd_ssn: the index of the last contiguously sent packet
* @reduced_txp: power reduced according to TPC. This is the actual value and
* not a copy from the LQ command. Thus, if not the first rate was used
* for Tx-ing then this value will be set to 0 by FW.
+ * @reserved1: reserved
*/
struct iwl_mvm_ba_notif {
u8 sta_addr[ETH_ALEN];
* @q_num: TFD queue number
* @tfd_index: Index of first un-acked frame in the TFD queue
* @scd_queue: For debug only - the physical queue the TFD queue is bound to
+ * @reserved: reserved for alignment
*/
struct iwl_mvm_compressed_ba_tfd {
__le16 q_num;
__le16 tfd_index;
u8 scd_queue;
- u8 reserved;
- __le16 reserved2;
+ u8 reserved[3];
} __packed; /* COMPRESSED_BA_TFD_API_S_VER_1 */
/**
* @query_frame_cnt: SCD query frame count
* @txed: number of frames sent in the aggregation (all-TIDs)
* @done: number of frames that were Acked by the BA (all-TIDs)
+ * @reserved: reserved (for alignment)
* @wireless_time: Wireless-media time
* @tx_rate: the rate the aggregation was sent at
* @tfd_cnt: number of TFD-Q elements
* @ra_tid_cnt: number of RATID-Q elements
- * @ba_tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd
+ * @tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd
* for details.
* @ra_tid: array of RA-TID queue status updates. For debug purposes only. See
* &iwl_mvm_compressed_ba_ratid for more details.
* struct iwl_mac_beacon_cmd - beacon template command with offloaded CSA
* @byte_cnt: byte count of the beacon frame
* @flags: for future use
+ * @reserved: reserved
* @data: see &iwl_mac_beacon_cmd_data
*/
struct iwl_mac_beacon_cmd {
/**
* struct iwl_scd_txq_cfg_cmd - New txq hw scheduler config command
- * @token:
+ * @token: unused
* @sta_id: station id
- * @tid:
+ * @tid: TID
* @scd_queue: scheduler queue to confiug
* @action: 1 queue enable, 0 queue disable, 2 change txq's tid owner
* Value is one of %iwl_scd_cfg_actions options
* @tx_fifo: %enum iwl_mvm_tx_fifo
* @window: BA window size
* @ssn: SSN for the BA agreement
+ * @reserved: reserved
*/
struct iwl_scd_txq_cfg_cmd {
u8 token;
__le32 valid;
} __packed;
-/*
- * Calibration control struct.
+/**
+ * struct iwl_calib_ctrl - Calibration control struct.
* Sent as part of the phy configuration command.
* @flow_trigger: bitmap for which calibrations to perform according to
- * flow triggers.
+ * flow triggers, using &enum iwl_calib_cfg
* @event_trigger: bitmap for which calibrations to perform according to
- * event triggers.
+ * event triggers, using &enum iwl_calib_cfg
*/
struct iwl_calib_ctrl {
__le32 flow_trigger;
IWL_CALIB_CFG_AGC_IDX = BIT(18),
};
-/*
- * Phy configuration command.
+/**
+ * struct iwl_phy_cfg_cmd - Phy configuration command
+ * @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg
+ * @calib_control: calibration control data
*/
struct iwl_phy_cfg_cmd {
__le32 phy_cfg;
#define SF_CFG_DUMMY_NOTIF_OFF BIT(16)
/**
- * Smart Fifo configuration command.
- * @state: smart fifo state, types listed in enum %iwl_sf_sate.
+ * struct iwl_sf_cfg_cmd - Smart Fifo configuration command.
+ * @state: smart fifo state, types listed in &enum iwl_sf_state.
* @watermark: Minimum allowed availabe free space in RXF for transient state.
* @long_delay_timeouts: aging and idle timer values for each scenario
* in long delay state.
} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */
/**
- * iwl_mcc_update_resp_v1 - response to MCC_UPDATE_CMD.
+ * struct iwl_mcc_update_resp_v1 - response to MCC_UPDATE_CMD.
* Contains the new channel control profile map, if changed, and the new MCC
* (mobile country code).
* The new MCC may be different than what was requested in MCC_UPDATE_CMD.
} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */
/**
- * iwl_mcc_update_resp - response to MCC_UPDATE_CMD.
+ * struct iwl_mcc_update_resp - response to MCC_UPDATE_CMD.
* Contains the new channel control profile map, if changed, and the new MCC
* (mobile country code).
* The new MCC may be different than what was requested in MCC_UPDATE_CMD.
};
/**
- * iwl_dts_measurement_cmd - request DTS temperature and/or voltage measurements
+ * struct iwl_dts_measurement_cmd - request DTS temp and/or voltage measurements
*
- * @flags: indicates which measurements we want as specified in &enum
- * iwl_dts_measurement_flags
+ * @flags: indicates which measurements we want as specified in
+ * &enum iwl_dts_measurement_flags
*/
struct iwl_dts_measurement_cmd {
__le32 flags;
};
/**
- * iwl_ext_dts_measurement_cmd - request extended DTS temperature measurements
+ * struct iwl_ext_dts_measurement_cmd - request extended DTS temp measurements
* @control_mode: see &enum iwl_dts_control_measurement_mode
* @temperature: used when over write DTS mode is selected
* @sensor: set temperature sensor to use. See &enum iwl_dts_used
#define IWL_MAX_DTS_TRIPS 8
/**
- * struct iwl_temp_report_ths_cmd - set temperature thresholds
+ * struct temp_report_ths_cmd - set temperature thresholds
*
* @num_temps: number of temperature thresholds passed
* @thresholds: array with the thresholds to be configured
}; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */
/**
- * Switch timing sub-element in a TDLS channel-switch command
+ * struct iwl_tdls_channel_switch_timing - Switch timing in TDLS channel-switch
* @frame_timestamp: GP2 timestamp of channel-switch request/response packet
* received from peer
* @max_offchan_duration: What amount of microseconds out of a DTIM is given
#define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200
/**
- * TDLS channel switch frame template
+ * struct iwl_tdls_channel_switch_frame - TDLS channel switch frame template
*
* A template representing a TDLS channel-switch request or response frame
*
} __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */
/**
- * TDLS channel switch command
+ * struct iwl_tdls_channel_switch_cmd - TDLS channel switch command
*
* The command is sent to initiate a channel switch and also in response to
* incoming TDLS channel-switch request/response packets from remote peers.
} __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */
/**
- * TDLS channel switch start notification
+ * struct iwl_tdls_channel_switch_notif - TDLS channel switch start notification
*
* @status: non-zero on success
* @offchannel_duration: duration given in microseconds
} __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */
/**
- * TDLS station info
+ * struct iwl_tdls_sta_info - TDLS station info
*
* @sta_id: station id of the TDLS peer
* @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx
} __packed; /* TDLS_STA_INFO_VER_1 */
/**
- * TDLS basic config command
+ * struct iwl_tdls_config_cmd - TDLS basic config command
*
* @id_and_color: MAC id and color being configured
* @tdls_peer_count: amount of currently connected TDLS peers
} __packed; /* TDLS_CONFIG_CMD_API_S_VER_1 */
/**
- * TDLS per-station config information from FW
+ * struct iwl_tdls_config_sta_info_res - TDLS per-station config information
*
* @sta_id: station id of the TDLS peer
* @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to
} __packed; /* TDLS_STA_INFO_RSP_VER_1 */
/**
- * TDLS config information from FW
+ * struct iwl_tdls_config_res - TDLS config information from FW
*
* @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP
* @sta_info: per-station TDLS config information
#define TX_FIFO_INTERNAL_MAX_NUM 6
/**
- * Shared memory configuration information from the FW
+ * struct iwl_shared_mem_cfg_v1 - Shared memory configuration information
*
* @shared_mem_addr: shared memory addr (pre 8000 HW set to 0x0 as MARBH is not
* accessible)
} __packed; /* SHARED_MEM_ALLOC_LMAC_API_S_VER_1 */
/**
- * Shared memory configuration information from the FW
+ * struct iwl_shared_mem_cfg - Shared memory configuration information
*
* @shared_mem_addr: shared memory address
* @shared_mem_size: shared memory size
} __packed; /* SHARED_MEM_ALLOC_API_S_VER_3 */
/**
- * VHT MU-MIMO group configuration
+ * struct iwl_mu_group_mgmt_cmd - VHT MU-MIMO group configuration
*
* @membership_status: a bitmap of MU groups
* @user_position:the position of station in a group. If the station is in the
#define MAX_STORED_BEACON_SIZE 600
/**
- * Stored beacon notification
+ * struct iwl_stored_beacon_notif - Stored beacon notification
*
* @system_time: system time on air rise
* @tsf: TSF on air rise
};
/**
- * Link Quality Measurement command
+ * struct iwl_link_qual_msrmnt_cmd - Link Quality Measurement command
* @cmd_operatrion: command operation to be performed (start or stop)
* as defined above.
* @mac_id: MAC ID the measurement applies to.
} __packed /* LQM_CMD_API_S_VER_1 */;
/**
- * Link Quality Measurement notification
+ * struct iwl_link_qual_msrmnt_notif - Link Quality Measurement notification
*
* @frequent_stations_air_time: an array containing the total air time
* (in uSec) used by the most frequently transmitting stations.
} __packed; /* LQM_MEASUREMENT_COMPLETE_NTF_API_S_VER1 */
/**
- * Channel switch NOA notification
+ * struct iwl_channel_switch_noa_notif - Channel switch NOA notification
*
* @id_and_color: ID and color of the MAC
*/
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff