obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_IBMEBUS) += ibmebus.o
+obj-$(CONFIG_EEH) += eeh.o eeh_pe.o eeh_dev.o eeh_cache.o \
+ eeh_driver.o eeh_event.o eeh_sysfs.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_FA_DUMP) += fadump.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
-pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
+pci64-$(CONFIG_PPC64) += pci_dn.o pci-hotplug.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
pci-common.o pci_of_scan.o
obj-$(CONFIG_PCI_MSI) += msi.o
--- /dev/null
+/*
+ * Copyright IBM Corporation 2001, 2005, 2006
+ * Copyright Dave Engebretsen & Todd Inglett 2001
+ * Copyright Linas Vepstas 2005, 2006
+ * Copyright 2001-2012 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Please address comments and feedback to Linas Vepstas <linas@austin.ibm.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/rbtree.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+#include <linux/of.h>
+
+#include <linux/atomic.h>
+#include <asm/eeh.h>
+#include <asm/eeh_event.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/rtas.h>
+
+
+/** Overview:
+ * EEH, or "Extended Error Handling" is a PCI bridge technology for
+ * dealing with PCI bus errors that can't be dealt with within the
+ * usual PCI framework, except by check-stopping the CPU. Systems
+ * that are designed for high-availability/reliability cannot afford
+ * to crash due to a "mere" PCI error, thus the need for EEH.
+ * An EEH-capable bridge operates by converting a detected error
+ * into a "slot freeze", taking the PCI adapter off-line, making
+ * the slot behave, from the OS'es point of view, as if the slot
+ * were "empty": all reads return 0xff's and all writes are silently
+ * ignored. EEH slot isolation events can be triggered by parity
+ * errors on the address or data busses (e.g. during posted writes),
+ * which in turn might be caused by low voltage on the bus, dust,
+ * vibration, humidity, radioactivity or plain-old failed hardware.
+ *
+ * Note, however, that one of the leading causes of EEH slot
+ * freeze events are buggy device drivers, buggy device microcode,
+ * or buggy device hardware. This is because any attempt by the
+ * device to bus-master data to a memory address that is not
+ * assigned to the device will trigger a slot freeze. (The idea
+ * is to prevent devices-gone-wild from corrupting system memory).
+ * Buggy hardware/drivers will have a miserable time co-existing
+ * with EEH.
+ *
+ * Ideally, a PCI device driver, when suspecting that an isolation
+ * event has occurred (e.g. by reading 0xff's), will then ask EEH
+ * whether this is the case, and then take appropriate steps to
+ * reset the PCI slot, the PCI device, and then resume operations.
+ * However, until that day, the checking is done here, with the
+ * eeh_check_failure() routine embedded in the MMIO macros. If
+ * the slot is found to be isolated, an "EEH Event" is synthesized
+ * and sent out for processing.
+ */
+
+/* If a device driver keeps reading an MMIO register in an interrupt
+ * handler after a slot isolation event, it might be broken.
+ * This sets the threshold for how many read attempts we allow
+ * before printing an error message.
+ */
+#define EEH_MAX_FAILS 2100000
+
+/* Time to wait for a PCI slot to report status, in milliseconds */
+#define PCI_BUS_RESET_WAIT_MSEC (60*1000)
+
+/* Platform dependent EEH operations */
+struct eeh_ops *eeh_ops = NULL;
+
+int eeh_subsystem_enabled;
+EXPORT_SYMBOL(eeh_subsystem_enabled);
+
+/*
+ * EEH probe mode support. The intention is to support multiple
+ * platforms for EEH. Some platforms like pSeries do PCI emunation
+ * based on device tree. However, other platforms like powernv probe
+ * PCI devices from hardware. The flag is used to distinguish that.
+ * In addition, struct eeh_ops::probe would be invoked for particular
+ * OF node or PCI device so that the corresponding PE would be created
+ * there.
+ */
+int eeh_probe_mode;
+
+/* Global EEH mutex */
+DEFINE_MUTEX(eeh_mutex);
+
+/* Lock to avoid races due to multiple reports of an error */
+static DEFINE_RAW_SPINLOCK(confirm_error_lock);
+
+/* Buffer for reporting pci register dumps. Its here in BSS, and
+ * not dynamically alloced, so that it ends up in RMO where RTAS
+ * can access it.
+ */
+#define EEH_PCI_REGS_LOG_LEN 4096
+static unsigned char pci_regs_buf[EEH_PCI_REGS_LOG_LEN];
+
+/*
+ * The struct is used to maintain the EEH global statistic
+ * information. Besides, the EEH global statistics will be
+ * exported to user space through procfs
+ */
+struct eeh_stats {
+ u64 no_device; /* PCI device not found */
+ u64 no_dn; /* OF node not found */
+ u64 no_cfg_addr; /* Config address not found */
+ u64 ignored_check; /* EEH check skipped */
+ u64 total_mmio_ffs; /* Total EEH checks */
+ u64 false_positives; /* Unnecessary EEH checks */
+ u64 slot_resets; /* PE reset */
+};
+
+static struct eeh_stats eeh_stats;
+
+#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
+
+/**
+ * eeh_gather_pci_data - Copy assorted PCI config space registers to buff
+ * @edev: device to report data for
+ * @buf: point to buffer in which to log
+ * @len: amount of room in buffer
+ *
+ * This routine captures assorted PCI configuration space data,
+ * and puts them into a buffer for RTAS error logging.
+ */
+static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
+{
+ struct device_node *dn = eeh_dev_to_of_node(edev);
+ struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+ u32 cfg;
+ int cap, i;
+ int n = 0;
+
+ n += scnprintf(buf+n, len-n, "%s\n", dn->full_name);
+ printk(KERN_WARNING "EEH: of node=%s\n", dn->full_name);
+
+ eeh_ops->read_config(dn, PCI_VENDOR_ID, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg);
+ printk(KERN_WARNING "EEH: PCI device/vendor: %08x\n", cfg);
+
+ eeh_ops->read_config(dn, PCI_COMMAND, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
+ printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg);
+
+ if (!dev) {
+ printk(KERN_WARNING "EEH: no PCI device for this of node\n");
+ return n;
+ }
+
+ /* Gather bridge-specific registers */
+ if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
+ eeh_ops->read_config(dn, PCI_SEC_STATUS, 2, &cfg);
+ n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg);
+ printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg);
+
+ eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &cfg);
+ n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg);
+ printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg);
+ }
+
+ /* Dump out the PCI-X command and status regs */
+ cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (cap) {
+ eeh_ops->read_config(dn, cap, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
+ printk(KERN_WARNING "EEH: PCI-X cmd: %08x\n", cfg);
+
+ eeh_ops->read_config(dn, cap+4, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg);
+ printk(KERN_WARNING "EEH: PCI-X status: %08x\n", cfg);
+ }
+
+ /* If PCI-E capable, dump PCI-E cap 10, and the AER */
+ cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (cap) {
+ n += scnprintf(buf+n, len-n, "pci-e cap10:\n");
+ printk(KERN_WARNING
+ "EEH: PCI-E capabilities and status follow:\n");
+
+ for (i=0; i<=8; i++) {
+ eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
+ printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg);
+ }
+
+ cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+ if (cap) {
+ n += scnprintf(buf+n, len-n, "pci-e AER:\n");
+ printk(KERN_WARNING
+ "EEH: PCI-E AER capability register set follows:\n");
+
+ for (i=0; i<14; i++) {
+ eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
+ printk(KERN_WARNING "EEH: PCI-E AER %02x: %08x\n", i, cfg);
+ }
+ }
+ }
+
+ return n;
+}
+
+/**
+ * eeh_slot_error_detail - Generate combined log including driver log and error log
+ * @pe: EEH PE
+ * @severity: temporary or permanent error log
+ *
+ * This routine should be called to generate the combined log, which
+ * is comprised of driver log and error log. The driver log is figured
+ * out from the config space of the corresponding PCI device, while
+ * the error log is fetched through platform dependent function call.
+ */
+void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
+{
+ size_t loglen = 0;
+ struct eeh_dev *edev;
+
+ eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
+ eeh_ops->configure_bridge(pe);
+ eeh_pe_restore_bars(pe);
+
+ pci_regs_buf[0] = 0;
+ eeh_pe_for_each_dev(pe, edev) {
+ loglen += eeh_gather_pci_data(edev, pci_regs_buf,
+ EEH_PCI_REGS_LOG_LEN);
+ }
+
+ eeh_ops->get_log(pe, severity, pci_regs_buf, loglen);
+}
+
+/**
+ * eeh_token_to_phys - Convert EEH address token to phys address
+ * @token: I/O token, should be address in the form 0xA....
+ *
+ * This routine should be called to convert virtual I/O address
+ * to physical one.
+ */
+static inline unsigned long eeh_token_to_phys(unsigned long token)
+{
+ pte_t *ptep;
+ unsigned long pa;
+
+ ptep = find_linux_pte(init_mm.pgd, token);
+ if (!ptep)
+ return token;
+ pa = pte_pfn(*ptep) << PAGE_SHIFT;
+
+ return pa | (token & (PAGE_SIZE-1));
+}
+
+/**
+ * eeh_dev_check_failure - Check if all 1's data is due to EEH slot freeze
+ * @edev: eeh device
+ *
+ * Check for an EEH failure for the given device node. Call this
+ * routine if the result of a read was all 0xff's and you want to
+ * find out if this is due to an EEH slot freeze. This routine
+ * will query firmware for the EEH status.
+ *
+ * Returns 0 if there has not been an EEH error; otherwise returns
+ * a non-zero value and queues up a slot isolation event notification.
+ *
+ * It is safe to call this routine in an interrupt context.
+ */
+int eeh_dev_check_failure(struct eeh_dev *edev)
+{
+ int ret;
+ unsigned long flags;
+ struct device_node *dn;
+ struct pci_dev *dev;
+ struct eeh_pe *pe;
+ int rc = 0;
+ const char *location;
+
+ eeh_stats.total_mmio_ffs++;
+
+ if (!eeh_subsystem_enabled)
+ return 0;
+
+ if (!edev) {
+ eeh_stats.no_dn++;
+ return 0;
+ }
+ dn = eeh_dev_to_of_node(edev);
+ dev = eeh_dev_to_pci_dev(edev);
+ pe = edev->pe;
+
+ /* Access to IO BARs might get this far and still not want checking. */
+ if (!pe) {
+ eeh_stats.ignored_check++;
+ pr_debug("EEH: Ignored check for %s %s\n",
+ eeh_pci_name(dev), dn->full_name);
+ return 0;
+ }
+
+ if (!pe->addr && !pe->config_addr) {
+ eeh_stats.no_cfg_addr++;
+ return 0;
+ }
+
+ /* If we already have a pending isolation event for this
+ * slot, we know it's bad already, we don't need to check.
+ * Do this checking under a lock; as multiple PCI devices
+ * in one slot might report errors simultaneously, and we
+ * only want one error recovery routine running.
+ */
+ raw_spin_lock_irqsave(&confirm_error_lock, flags);
+ rc = 1;
+ if (pe->state & EEH_PE_ISOLATED) {
+ pe->check_count++;
+ if (pe->check_count % EEH_MAX_FAILS == 0) {
+ location = of_get_property(dn, "ibm,loc-code", NULL);
+ printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
+ "location=%s driver=%s pci addr=%s\n",
+ pe->check_count, location,
+ eeh_driver_name(dev), eeh_pci_name(dev));
+ printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
+ eeh_driver_name(dev));
+ dump_stack();
+ }
+ goto dn_unlock;
+ }
+
+ /*
+ * Now test for an EEH failure. This is VERY expensive.
+ * Note that the eeh_config_addr may be a parent device
+ * in the case of a device behind a bridge, or it may be
+ * function zero of a multi-function device.
+ * In any case they must share a common PHB.
+ */
+ ret = eeh_ops->get_state(pe, NULL);
+
+ /* Note that config-io to empty slots may fail;
+ * they are empty when they don't have children.
+ * We will punt with the following conditions: Failure to get
+ * PE's state, EEH not support and Permanently unavailable
+ * state, PE is in good state.
+ */
+ if ((ret < 0) ||
+ (ret == EEH_STATE_NOT_SUPPORT) ||
+ (ret & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) ==
+ (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) {
+ eeh_stats.false_positives++;
+ pe->false_positives++;
+ rc = 0;
+ goto dn_unlock;
+ }
+
+ eeh_stats.slot_resets++;
+
+ /* Avoid repeated reports of this failure, including problems
+ * with other functions on this device, and functions under
+ * bridges.
+ */
+ eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+ raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
+
+ eeh_send_failure_event(pe);
+
+ /* Most EEH events are due to device driver bugs. Having
+ * a stack trace will help the device-driver authors figure
+ * out what happened. So print that out.
+ */
+ WARN(1, "EEH: failure detected\n");
+ return 1;
+
+dn_unlock:
+ raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
+ return rc;
+}
+
+EXPORT_SYMBOL_GPL(eeh_dev_check_failure);
+
+/**
+ * eeh_check_failure - Check if all 1's data is due to EEH slot freeze
+ * @token: I/O token, should be address in the form 0xA....
+ * @val: value, should be all 1's (XXX why do we need this arg??)
+ *
+ * Check for an EEH failure at the given token address. Call this
+ * routine if the result of a read was all 0xff's and you want to
+ * find out if this is due to an EEH slot freeze event. This routine
+ * will query firmware for the EEH status.
+ *
+ * Note this routine is safe to call in an interrupt context.
+ */
+unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
+{
+ unsigned long addr;
+ struct eeh_dev *edev;
+
+ /* Finding the phys addr + pci device; this is pretty quick. */
+ addr = eeh_token_to_phys((unsigned long __force) token);
+ edev = eeh_addr_cache_get_dev(addr);
+ if (!edev) {
+ eeh_stats.no_device++;
+ return val;
+ }
+
+ eeh_dev_check_failure(edev);
+
+ pci_dev_put(eeh_dev_to_pci_dev(edev));
+ return val;
+}
+
+EXPORT_SYMBOL(eeh_check_failure);
+
+
+/**
+ * eeh_pci_enable - Enable MMIO or DMA transfers for this slot
+ * @pe: EEH PE
+ *
+ * This routine should be called to reenable frozen MMIO or DMA
+ * so that it would work correctly again. It's useful while doing
+ * recovery or log collection on the indicated device.
+ */
+int eeh_pci_enable(struct eeh_pe *pe, int function)
+{
+ int rc;
+
+ rc = eeh_ops->set_option(pe, function);
+ if (rc)
+ pr_warning("%s: Unexpected state change %d on PHB#%d-PE#%x, err=%d\n",
+ __func__, function, pe->phb->global_number, pe->addr, rc);
+
+ rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
+ if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) &&
+ (function == EEH_OPT_THAW_MMIO))
+ return 0;
+
+ return rc;
+}
+
+/**
+ * pcibios_set_pcie_slot_reset - Set PCI-E reset state
+ * @dev: pci device struct
+ * @state: reset state to enter
+ *
+ * Return value:
+ * 0 if success
+ */
+int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
+{
+ struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
+ struct eeh_pe *pe = edev->pe;
+
+ if (!pe) {
+ pr_err("%s: No PE found on PCI device %s\n",
+ __func__, pci_name(dev));
+ return -EINVAL;
+ }
+
+ switch (state) {
+ case pcie_deassert_reset:
+ eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
+ break;
+ case pcie_hot_reset:
+ eeh_ops->reset(pe, EEH_RESET_HOT);
+ break;
+ case pcie_warm_reset:
+ eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ return 0;
+}
+
+/**
+ * eeh_set_pe_freset - Check the required reset for the indicated device
+ * @data: EEH device
+ * @flag: return value
+ *
+ * Each device might have its preferred reset type: fundamental or
+ * hot reset. The routine is used to collected the information for
+ * the indicated device and its children so that the bunch of the
+ * devices could be reset properly.
+ */
+static void *eeh_set_dev_freset(void *data, void *flag)
+{
+ struct pci_dev *dev;
+ unsigned int *freset = (unsigned int *)flag;
+ struct eeh_dev *edev = (struct eeh_dev *)data;
+
+ dev = eeh_dev_to_pci_dev(edev);
+ if (dev)
+ *freset |= dev->needs_freset;
+
+ return NULL;
+}
+
+/**
+ * eeh_reset_pe_once - Assert the pci #RST line for 1/4 second
+ * @pe: EEH PE
+ *
+ * Assert the PCI #RST line for 1/4 second.
+ */
+static void eeh_reset_pe_once(struct eeh_pe *pe)
+{
+ unsigned int freset = 0;
+
+ /* Determine type of EEH reset required for
+ * Partitionable Endpoint, a hot-reset (1)
+ * or a fundamental reset (3).
+ * A fundamental reset required by any device under
+ * Partitionable Endpoint trumps hot-reset.
+ */
+ eeh_pe_dev_traverse(pe, eeh_set_dev_freset, &freset);
+
+ if (freset)
+ eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
+ else
+ eeh_ops->reset(pe, EEH_RESET_HOT);
+
+ /* The PCI bus requires that the reset be held high for at least
+ * a 100 milliseconds. We wait a bit longer 'just in case'.
+ */
+#define PCI_BUS_RST_HOLD_TIME_MSEC 250
+ msleep(PCI_BUS_RST_HOLD_TIME_MSEC);
+
+ /* We might get hit with another EEH freeze as soon as the
+ * pci slot reset line is dropped. Make sure we don't miss
+ * these, and clear the flag now.
+ */
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
+
+ eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
+
+ /* After a PCI slot has been reset, the PCI Express spec requires
+ * a 1.5 second idle time for the bus to stabilize, before starting
+ * up traffic.
+ */
+#define PCI_BUS_SETTLE_TIME_MSEC 1800
+ msleep(PCI_BUS_SETTLE_TIME_MSEC);
+}
+
+/**
+ * eeh_reset_pe - Reset the indicated PE
+ * @pe: EEH PE
+ *
+ * This routine should be called to reset indicated device, including
+ * PE. A PE might include multiple PCI devices and sometimes PCI bridges
+ * might be involved as well.
+ */
+int eeh_reset_pe(struct eeh_pe *pe)
+{
+ int i, rc;
+
+ /* Take three shots at resetting the bus */
+ for (i=0; i<3; i++) {
+ eeh_reset_pe_once(pe);
+
+ rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
+ if (rc == (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE))
+ return 0;
+
+ if (rc < 0) {
+ pr_err("%s: Unrecoverable slot failure on PHB#%d-PE#%x",
+ __func__, pe->phb->global_number, pe->addr);
+ return -1;
+ }
+ pr_err("EEH: bus reset %d failed on PHB#%d-PE#%x, rc=%d\n",
+ i+1, pe->phb->global_number, pe->addr, rc);
+ }
+
+ return -1;
+}
+
+/**
+ * eeh_save_bars - Save device bars
+ * @edev: PCI device associated EEH device
+ *
+ * Save the values of the device bars. Unlike the restore
+ * routine, this routine is *not* recursive. This is because
+ * PCI devices are added individually; but, for the restore,
+ * an entire slot is reset at a time.
+ */
+void eeh_save_bars(struct eeh_dev *edev)
+{
+ int i;
+ struct device_node *dn;
+
+ if (!edev)
+ return;
+ dn = eeh_dev_to_of_node(edev);
+
+ for (i = 0; i < 16; i++)
+ eeh_ops->read_config(dn, i * 4, 4, &edev->config_space[i]);
+}
+
+/**
+ * eeh_ops_register - Register platform dependent EEH operations
+ * @ops: platform dependent EEH operations
+ *
+ * Register the platform dependent EEH operation callback
+ * functions. The platform should call this function before
+ * any other EEH operations.
+ */
+int __init eeh_ops_register(struct eeh_ops *ops)
+{
+ if (!ops->name) {
+ pr_warning("%s: Invalid EEH ops name for %p\n",
+ __func__, ops);
+ return -EINVAL;
+ }
+
+ if (eeh_ops && eeh_ops != ops) {
+ pr_warning("%s: EEH ops of platform %s already existing (%s)\n",
+ __func__, eeh_ops->name, ops->name);
+ return -EEXIST;
+ }
+
+ eeh_ops = ops;
+
+ return 0;
+}
+
+/**
+ * eeh_ops_unregister - Unreigster platform dependent EEH operations
+ * @name: name of EEH platform operations
+ *
+ * Unregister the platform dependent EEH operation callback
+ * functions.
+ */
+int __exit eeh_ops_unregister(const char *name)
+{
+ if (!name || !strlen(name)) {
+ pr_warning("%s: Invalid EEH ops name\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ if (eeh_ops && !strcmp(eeh_ops->name, name)) {
+ eeh_ops = NULL;
+ return 0;
+ }
+
+ return -EEXIST;
+}
+
+/**
+ * eeh_init - EEH initialization
+ *
+ * Initialize EEH by trying to enable it for all of the adapters in the system.
+ * As a side effect we can determine here if eeh is supported at all.
+ * Note that we leave EEH on so failed config cycles won't cause a machine
+ * check. If a user turns off EEH for a particular adapter they are really
+ * telling Linux to ignore errors. Some hardware (e.g. POWER5) won't
+ * grant access to a slot if EEH isn't enabled, and so we always enable
+ * EEH for all slots/all devices.
+ *
+ * The eeh-force-off option disables EEH checking globally, for all slots.
+ * Even if force-off is set, the EEH hardware is still enabled, so that
+ * newer systems can boot.
+ */
+static int __init eeh_init(void)
+{
+ struct pci_controller *hose, *tmp;
+ struct device_node *phb;
+ int ret;
+
+ /* call platform initialization function */
+ if (!eeh_ops) {
+ pr_warning("%s: Platform EEH operation not found\n",
+ __func__);
+ return -EEXIST;
+ } else if ((ret = eeh_ops->init())) {
+ pr_warning("%s: Failed to call platform init function (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ raw_spin_lock_init(&confirm_error_lock);
+
+ /* Enable EEH for all adapters */
+ if (eeh_probe_mode_devtree()) {
+ list_for_each_entry_safe(hose, tmp,
+ &hose_list, list_node) {
+ phb = hose->dn;
+ traverse_pci_devices(phb, eeh_ops->of_probe, NULL);
+ }
+ }
+
+ if (eeh_subsystem_enabled)
+ pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n");
+ else
+ pr_warning("EEH: No capable adapters found\n");
+
+ return ret;
+}
+
+core_initcall_sync(eeh_init);
+
+/**
+ * eeh_add_device_early - Enable EEH for the indicated device_node
+ * @dn: device node for which to set up EEH
+ *
+ * This routine must be used to perform EEH initialization for PCI
+ * devices that were added after system boot (e.g. hotplug, dlpar).
+ * This routine must be called before any i/o is performed to the
+ * adapter (inluding any config-space i/o).
+ * Whether this actually enables EEH or not for this device depends
+ * on the CEC architecture, type of the device, on earlier boot
+ * command-line arguments & etc.
+ */
+static void eeh_add_device_early(struct device_node *dn)
+{
+ struct pci_controller *phb;
+
+ if (!of_node_to_eeh_dev(dn))
+ return;
+ phb = of_node_to_eeh_dev(dn)->phb;
+
+ /* USB Bus children of PCI devices will not have BUID's */
+ if (NULL == phb || 0 == phb->buid)
+ return;
+
+ /* FIXME: hotplug support on POWERNV */
+ eeh_ops->of_probe(dn, NULL);
+}
+
+/**
+ * eeh_add_device_tree_early - Enable EEH for the indicated device
+ * @dn: device node
+ *
+ * This routine must be used to perform EEH initialization for the
+ * indicated PCI device that was added after system boot (e.g.
+ * hotplug, dlpar).
+ */
+void eeh_add_device_tree_early(struct device_node *dn)
+{
+ struct device_node *sib;
+
+ for_each_child_of_node(dn, sib)
+ eeh_add_device_tree_early(sib);
+ eeh_add_device_early(dn);
+}
+EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
+
+/**
+ * eeh_add_device_late - Perform EEH initialization for the indicated pci device
+ * @dev: pci device for which to set up EEH
+ *
+ * This routine must be used to complete EEH initialization for PCI
+ * devices that were added after system boot (e.g. hotplug, dlpar).
+ */
+static void eeh_add_device_late(struct pci_dev *dev)
+{
+ struct device_node *dn;
+ struct eeh_dev *edev;
+
+ if (!dev || !eeh_subsystem_enabled)
+ return;
+
+ pr_debug("EEH: Adding device %s\n", pci_name(dev));
+
+ dn = pci_device_to_OF_node(dev);
+ edev = of_node_to_eeh_dev(dn);
+ if (edev->pdev == dev) {
+ pr_debug("EEH: Already referenced !\n");
+ return;
+ }
+ WARN_ON(edev->pdev);
+
+ pci_dev_get(dev);
+ edev->pdev = dev;
+ dev->dev.archdata.edev = edev;
+
+ eeh_addr_cache_insert_dev(dev);
+}
+
+/**
+ * eeh_add_device_tree_late - Perform EEH initialization for the indicated PCI bus
+ * @bus: PCI bus
+ *
+ * This routine must be used to perform EEH initialization for PCI
+ * devices which are attached to the indicated PCI bus. The PCI bus
+ * is added after system boot through hotplug or dlpar.
+ */
+void eeh_add_device_tree_late(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ eeh_add_device_late(dev);
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ struct pci_bus *subbus = dev->subordinate;
+ if (subbus)
+ eeh_add_device_tree_late(subbus);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
+
+/**
+ * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
+ * @bus: PCI bus
+ *
+ * This routine must be used to add EEH sysfs files for PCI
+ * devices which are attached to the indicated PCI bus. The PCI bus
+ * is added after system boot through hotplug or dlpar.
+ */
+void eeh_add_sysfs_files(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ eeh_sysfs_add_device(dev);
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ struct pci_bus *subbus = dev->subordinate;
+ if (subbus)
+ eeh_add_sysfs_files(subbus);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
+
+/**
+ * eeh_remove_device - Undo EEH setup for the indicated pci device
+ * @dev: pci device to be removed
+ * @purge_pe: remove the PE or not
+ *
+ * This routine should be called when a device is removed from
+ * a running system (e.g. by hotplug or dlpar). It unregisters
+ * the PCI device from the EEH subsystem. I/O errors affecting
+ * this device will no longer be detected after this call; thus,
+ * i/o errors affecting this slot may leave this device unusable.
+ */
+static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
+{
+ struct eeh_dev *edev;
+
+ if (!dev || !eeh_subsystem_enabled)
+ return;
+ edev = pci_dev_to_eeh_dev(dev);
+
+ /* Unregister the device with the EEH/PCI address search system */
+ pr_debug("EEH: Removing device %s\n", pci_name(dev));
+
+ if (!edev || !edev->pdev) {
+ pr_debug("EEH: Not referenced !\n");
+ return;
+ }
+ edev->pdev = NULL;
+ dev->dev.archdata.edev = NULL;
+ pci_dev_put(dev);
+
+ eeh_rmv_from_parent_pe(edev, purge_pe);
+ eeh_addr_cache_rmv_dev(dev);
+ eeh_sysfs_remove_device(dev);
+}
+
+/**
+ * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
+ * @dev: PCI device
+ * @purge_pe: remove the corresponding PE or not
+ *
+ * This routine must be called when a device is removed from the
+ * running system through hotplug or dlpar. The corresponding
+ * PCI address cache will be removed.
+ */
+void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe)
+{
+ struct pci_bus *bus = dev->subordinate;
+ struct pci_dev *child, *tmp;
+
+ eeh_remove_device(dev, purge_pe);
+
+ if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
+ eeh_remove_bus_device(child, purge_pe);
+ }
+}
+EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
+
+static int proc_eeh_show(struct seq_file *m, void *v)
+{
+ if (0 == eeh_subsystem_enabled) {
+ seq_printf(m, "EEH Subsystem is globally disabled\n");
+ seq_printf(m, "eeh_total_mmio_ffs=%llu\n", eeh_stats.total_mmio_ffs);
+ } else {
+ seq_printf(m, "EEH Subsystem is enabled\n");
+ seq_printf(m,
+ "no device=%llu\n"
+ "no device node=%llu\n"
+ "no config address=%llu\n"
+ "check not wanted=%llu\n"
+ "eeh_total_mmio_ffs=%llu\n"
+ "eeh_false_positives=%llu\n"
+ "eeh_slot_resets=%llu\n",
+ eeh_stats.no_device,
+ eeh_stats.no_dn,
+ eeh_stats.no_cfg_addr,
+ eeh_stats.ignored_check,
+ eeh_stats.total_mmio_ffs,
+ eeh_stats.false_positives,
+ eeh_stats.slot_resets);
+ }
+
+ return 0;
+}
+
+static int proc_eeh_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, proc_eeh_show, NULL);
+}
+
+static const struct file_operations proc_eeh_operations = {
+ .open = proc_eeh_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init eeh_init_proc(void)
+{
+ if (machine_is(pseries))
+ proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations);
+ return 0;
+}
+__initcall(eeh_init_proc);
--- /dev/null
+/*
+ * PCI address cache; allows the lookup of PCI devices based on I/O address
+ *
+ * Copyright IBM Corporation 2004
+ * Copyright Linas Vepstas <linas@austin.ibm.com> 2004
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/rbtree.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/atomic.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+
+
+/**
+ * The pci address cache subsystem. This subsystem places
+ * PCI device address resources into a red-black tree, sorted
+ * according to the address range, so that given only an i/o
+ * address, the corresponding PCI device can be **quickly**
+ * found. It is safe to perform an address lookup in an interrupt
+ * context; this ability is an important feature.
+ *
+ * Currently, the only customer of this code is the EEH subsystem;
+ * thus, this code has been somewhat tailored to suit EEH better.
+ * In particular, the cache does *not* hold the addresses of devices
+ * for which EEH is not enabled.
+ *
+ * (Implementation Note: The RB tree seems to be better/faster
+ * than any hash algo I could think of for this problem, even
+ * with the penalty of slow pointer chases for d-cache misses).
+ */
+struct pci_io_addr_range {
+ struct rb_node rb_node;
+ unsigned long addr_lo;
+ unsigned long addr_hi;
+ struct eeh_dev *edev;
+ struct pci_dev *pcidev;
+ unsigned int flags;
+};
+
+static struct pci_io_addr_cache {
+ struct rb_root rb_root;
+ spinlock_t piar_lock;
+} pci_io_addr_cache_root;
+
+static inline struct eeh_dev *__eeh_addr_cache_get_device(unsigned long addr)
+{
+ struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node;
+
+ while (n) {
+ struct pci_io_addr_range *piar;
+ piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+
+ if (addr < piar->addr_lo) {
+ n = n->rb_left;
+ } else {
+ if (addr > piar->addr_hi) {
+ n = n->rb_right;
+ } else {
+ pci_dev_get(piar->pcidev);
+ return piar->edev;
+ }
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * eeh_addr_cache_get_dev - Get device, given only address
+ * @addr: mmio (PIO) phys address or i/o port number
+ *
+ * Given an mmio phys address, or a port number, find a pci device
+ * that implements this address. Be sure to pci_dev_put the device
+ * when finished. I/O port numbers are assumed to be offset
+ * from zero (that is, they do *not* have pci_io_addr added in).
+ * It is safe to call this function within an interrupt.
+ */
+struct eeh_dev *eeh_addr_cache_get_dev(unsigned long addr)
+{
+ struct eeh_dev *edev;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+ edev = __eeh_addr_cache_get_device(addr);
+ spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+ return edev;
+}
+
+#ifdef DEBUG
+/*
+ * Handy-dandy debug print routine, does nothing more
+ * than print out the contents of our addr cache.
+ */
+static void eeh_addr_cache_print(struct pci_io_addr_cache *cache)
+{
+ struct rb_node *n;
+ int cnt = 0;
+
+ n = rb_first(&cache->rb_root);
+ while (n) {
+ struct pci_io_addr_range *piar;
+ piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+ pr_debug("PCI: %s addr range %d [%lx-%lx]: %s\n",
+ (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt,
+ piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev));
+ cnt++;
+ n = rb_next(n);
+ }
+}
+#endif
+
+/* Insert address range into the rb tree. */
+static struct pci_io_addr_range *
+eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
+ unsigned long ahi, unsigned int flags)
+{
+ struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node;
+ struct rb_node *parent = NULL;
+ struct pci_io_addr_range *piar;
+
+ /* Walk tree, find a place to insert into tree */
+ while (*p) {
+ parent = *p;
+ piar = rb_entry(parent, struct pci_io_addr_range, rb_node);
+ if (ahi < piar->addr_lo) {
+ p = &parent->rb_left;
+ } else if (alo > piar->addr_hi) {
+ p = &parent->rb_right;
+ } else {
+ if (dev != piar->pcidev ||
+ alo != piar->addr_lo || ahi != piar->addr_hi) {
+ pr_warning("PIAR: overlapping address range\n");
+ }
+ return piar;
+ }
+ }
+ piar = kzalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC);
+ if (!piar)
+ return NULL;
+
+ pci_dev_get(dev);
+ piar->addr_lo = alo;
+ piar->addr_hi = ahi;
+ piar->edev = pci_dev_to_eeh_dev(dev);
+ piar->pcidev = dev;
+ piar->flags = flags;
+
+#ifdef DEBUG
+ pr_debug("PIAR: insert range=[%lx:%lx] dev=%s\n",
+ alo, ahi, pci_name(dev));
+#endif
+
+ rb_link_node(&piar->rb_node, parent, p);
+ rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
+
+ return piar;
+}
+
+static void __eeh_addr_cache_insert_dev(struct pci_dev *dev)
+{
+ struct device_node *dn;
+ struct eeh_dev *edev;
+ int i;
+
+ dn = pci_device_to_OF_node(dev);
+ if (!dn) {
+ pr_warning("PCI: no pci dn found for dev=%s\n", pci_name(dev));
+ return;
+ }
+
+ edev = of_node_to_eeh_dev(dn);
+ if (!edev) {
+ pr_warning("PCI: no EEH dev found for dn=%s\n",
+ dn->full_name);
+ return;
+ }
+
+ /* Skip any devices for which EEH is not enabled. */
+ if (!edev->pe) {
+#ifdef DEBUG
+ pr_info("PCI: skip building address cache for=%s - %s\n",
+ pci_name(dev), dn->full_name);
+#endif
+ return;
+ }
+
+ /* Walk resources on this device, poke them into the tree */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ unsigned long start = pci_resource_start(dev,i);
+ unsigned long end = pci_resource_end(dev,i);
+ unsigned int flags = pci_resource_flags(dev,i);
+
+ /* We are interested only bus addresses, not dma or other stuff */
+ if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+ continue;
+ if (start == 0 || ~start == 0 || end == 0 || ~end == 0)
+ continue;
+ eeh_addr_cache_insert(dev, start, end, flags);
+ }
+}
+
+/**
+ * eeh_addr_cache_insert_dev - Add a device to the address cache
+ * @dev: PCI device whose I/O addresses we are interested in.
+ *
+ * In order to support the fast lookup of devices based on addresses,
+ * we maintain a cache of devices that can be quickly searched.
+ * This routine adds a device to that cache.
+ */
+void eeh_addr_cache_insert_dev(struct pci_dev *dev)
+{
+ unsigned long flags;
+
+ /* Ignore PCI bridges */
+ if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+ return;
+
+ spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+ __eeh_addr_cache_insert_dev(dev);
+ spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+}
+
+static inline void __eeh_addr_cache_rmv_dev(struct pci_dev *dev)
+{
+ struct rb_node *n;
+
+restart:
+ n = rb_first(&pci_io_addr_cache_root.rb_root);
+ while (n) {
+ struct pci_io_addr_range *piar;
+ piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+
+ if (piar->pcidev == dev) {
+ rb_erase(n, &pci_io_addr_cache_root.rb_root);
+ pci_dev_put(piar->pcidev);
+ kfree(piar);
+ goto restart;
+ }
+ n = rb_next(n);
+ }
+}
+
+/**
+ * eeh_addr_cache_rmv_dev - remove pci device from addr cache
+ * @dev: device to remove
+ *
+ * Remove a device from the addr-cache tree.
+ * This is potentially expensive, since it will walk
+ * the tree multiple times (once per resource).
+ * But so what; device removal doesn't need to be that fast.
+ */
+void eeh_addr_cache_rmv_dev(struct pci_dev *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+ __eeh_addr_cache_rmv_dev(dev);
+ spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+}
+
+/**
+ * eeh_addr_cache_build - Build a cache of I/O addresses
+ *
+ * Build a cache of pci i/o addresses. This cache will be used to
+ * find the pci device that corresponds to a given address.
+ * This routine scans all pci busses to build the cache.
+ * Must be run late in boot process, after the pci controllers
+ * have been scanned for devices (after all device resources are known).
+ */
+void __init eeh_addr_cache_build(void)
+{
+ struct device_node *dn;
+ struct eeh_dev *edev;
+ struct pci_dev *dev = NULL;
+
+ spin_lock_init(&pci_io_addr_cache_root.piar_lock);
+
+ for_each_pci_dev(dev) {
+ eeh_addr_cache_insert_dev(dev);
+
+ dn = pci_device_to_OF_node(dev);
+ if (!dn)
+ continue;
+
+ edev = of_node_to_eeh_dev(dn);
+ if (!edev)
+ continue;
+
+ pci_dev_get(dev); /* matching put is in eeh_remove_device() */
+ dev->dev.archdata.edev = edev;
+ edev->pdev = dev;
+
+ eeh_sysfs_add_device(dev);
+ }
+
+#ifdef DEBUG
+ /* Verify tree built up above, echo back the list of addrs. */
+ eeh_addr_cache_print(&pci_io_addr_cache_root);
+#endif
+}
--- /dev/null
+/*
+ * The file intends to implement dynamic creation of EEH device, which will
+ * be bound with OF node and PCI device simutaneously. The EEH devices would
+ * be foundamental information for EEH core components to work proerly. Besides,
+ * We have to support multiple situations where dynamic creation of EEH device
+ * is required:
+ *
+ * 1) Before PCI emunation starts, we need create EEH devices according to the
+ * PCI sensitive OF nodes.
+ * 2) When PCI emunation is done, we need do the binding between PCI device and
+ * the associated EEH device.
+ * 3) DR (Dynamic Reconfiguration) would create PCI sensitive OF node. EEH device
+ * will be created while PCI sensitive OF node is detected from DR.
+ * 4) PCI hotplug needs redoing the binding between PCI device and EEH device. If
+ * PHB is newly inserted, we also need create EEH devices accordingly.
+ *
+ * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2012.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/export.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+
+/**
+ * eeh_dev_init - Create EEH device according to OF node
+ * @dn: device node
+ * @data: PHB
+ *
+ * It will create EEH device according to the given OF node. The function
+ * might be called by PCI emunation, DR, PHB hotplug.
+ */
+void *eeh_dev_init(struct device_node *dn, void *data)
+{
+ struct pci_controller *phb = data;
+ struct eeh_dev *edev;
+
+ /* Allocate EEH device */
+ edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+ if (!edev) {
+ pr_warning("%s: out of memory\n", __func__);
+ return NULL;
+ }
+
+ /* Associate EEH device with OF node */
+ PCI_DN(dn)->edev = edev;
+ edev->dn = dn;
+ edev->phb = phb;
+ INIT_LIST_HEAD(&edev->list);
+
+ return NULL;
+}
+
+/**
+ * eeh_dev_phb_init_dynamic - Create EEH devices for devices included in PHB
+ * @phb: PHB
+ *
+ * Scan the PHB OF node and its child association, then create the
+ * EEH devices accordingly
+ */
+void eeh_dev_phb_init_dynamic(struct pci_controller *phb)
+{
+ struct device_node *dn = phb->dn;
+
+ /* EEH PE for PHB */
+ eeh_phb_pe_create(phb);
+
+ /* EEH device for PHB */
+ eeh_dev_init(dn, phb);
+
+ /* EEH devices for children OF nodes */
+ traverse_pci_devices(dn, eeh_dev_init, phb);
+}
+
+/**
+ * eeh_dev_phb_init - Create EEH devices for devices included in existing PHBs
+ *
+ * Scan all the existing PHBs and create EEH devices for their OF
+ * nodes and their children OF nodes
+ */
+static int __init eeh_dev_phb_init(void)
+{
+ struct pci_controller *phb, *tmp;
+
+ list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
+ eeh_dev_phb_init_dynamic(phb);
+
+ pr_info("EEH: devices created\n");
+
+ return 0;
+}
+
+core_initcall(eeh_dev_phb_init);
--- /dev/null
+/*
+ * PCI Error Recovery Driver for RPA-compliant PPC64 platform.
+ * Copyright IBM Corp. 2004 2005
+ * Copyright Linas Vepstas <linas@linas.org> 2004, 2005
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send comments and feedback to Linas Vepstas <linas@austin.ibm.com>
+ */
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <asm/eeh.h>
+#include <asm/eeh_event.h>
+#include <asm/ppc-pci.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+
+/**
+ * eeh_pcid_name - Retrieve name of PCI device driver
+ * @pdev: PCI device
+ *
+ * This routine is used to retrieve the name of PCI device driver
+ * if that's valid.
+ */
+static inline const char *eeh_pcid_name(struct pci_dev *pdev)
+{
+ if (pdev && pdev->dev.driver)
+ return pdev->dev.driver->name;
+ return "";
+}
+
+/**
+ * eeh_pcid_get - Get the PCI device driver
+ * @pdev: PCI device
+ *
+ * The function is used to retrieve the PCI device driver for
+ * the indicated PCI device. Besides, we will increase the reference
+ * of the PCI device driver to prevent that being unloaded on
+ * the fly. Otherwise, kernel crash would be seen.
+ */
+static inline struct pci_driver *eeh_pcid_get(struct pci_dev *pdev)
+{
+ if (!pdev || !pdev->driver)
+ return NULL;
+
+ if (!try_module_get(pdev->driver->driver.owner))
+ return NULL;
+
+ return pdev->driver;
+}
+
+/**
+ * eeh_pcid_put - Dereference on the PCI device driver
+ * @pdev: PCI device
+ *
+ * The function is called to do dereference on the PCI device
+ * driver of the indicated PCI device.
+ */
+static inline void eeh_pcid_put(struct pci_dev *pdev)
+{
+ if (!pdev || !pdev->driver)
+ return;
+
+ module_put(pdev->driver->driver.owner);
+}
+
+#if 0
+static void print_device_node_tree(struct pci_dn *pdn, int dent)
+{
+ int i;
+ struct device_node *pc;
+
+ if (!pdn)
+ return;
+ for (i = 0; i < dent; i++)
+ printk(" ");
+ printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n",
+ pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr,
+ pdn->eeh_pe_config_addr, pdn->node->full_name);
+ dent += 3;
+ pc = pdn->node->child;
+ while (pc) {
+ print_device_node_tree(PCI_DN(pc), dent);
+ pc = pc->sibling;
+ }
+}
+#endif
+
+/**
+ * eeh_disable_irq - Disable interrupt for the recovering device
+ * @dev: PCI device
+ *
+ * This routine must be called when reporting temporary or permanent
+ * error to the particular PCI device to disable interrupt of that
+ * device. If the device has enabled MSI or MSI-X interrupt, we needn't
+ * do real work because EEH should freeze DMA transfers for those PCI
+ * devices encountering EEH errors, which includes MSI or MSI-X.
+ */
+static void eeh_disable_irq(struct pci_dev *dev)
+{
+ struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
+
+ /* Don't disable MSI and MSI-X interrupts. They are
+ * effectively disabled by the DMA Stopped state
+ * when an EEH error occurs.
+ */
+ if (dev->msi_enabled || dev->msix_enabled)
+ return;
+
+ if (!irq_has_action(dev->irq))
+ return;
+
+ edev->mode |= EEH_DEV_IRQ_DISABLED;
+ disable_irq_nosync(dev->irq);
+}
+
+/**
+ * eeh_enable_irq - Enable interrupt for the recovering device
+ * @dev: PCI device
+ *
+ * This routine must be called to enable interrupt while failed
+ * device could be resumed.
+ */
+static void eeh_enable_irq(struct pci_dev *dev)
+{
+ struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
+
+ if ((edev->mode) & EEH_DEV_IRQ_DISABLED) {
+ edev->mode &= ~EEH_DEV_IRQ_DISABLED;
+ enable_irq(dev->irq);
+ }
+}
+
+/**
+ * eeh_report_error - Report pci error to each device driver
+ * @data: eeh device
+ * @userdata: return value
+ *
+ * Report an EEH error to each device driver, collect up and
+ * merge the device driver responses. Cumulative response
+ * passed back in "userdata".
+ */
+static void *eeh_report_error(void *data, void *userdata)
+{
+ struct eeh_dev *edev = (struct eeh_dev *)data;
+ struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+ enum pci_ers_result rc, *res = userdata;
+ struct pci_driver *driver;
+
+ /* We might not have the associated PCI device,
+ * then we should continue for next one.
+ */
+ if (!dev) return NULL;
+ dev->error_state = pci_channel_io_frozen;
+
+ driver = eeh_pcid_get(dev);
+ if (!driver) return NULL;
+
+ eeh_disable_irq(dev);
+
+ if (!driver->err_handler ||
+ !driver->err_handler->error_detected) {
+ eeh_pcid_put(dev);
+ return NULL;
+ }
+
+ rc = driver->err_handler->error_detected(dev, pci_channel_io_frozen);
+
+ /* A driver that needs a reset trumps all others */
+ if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
+ if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+
+ eeh_pcid_put(dev);
+ return NULL;
+}
+
+/**
+ * eeh_report_mmio_enabled - Tell drivers that MMIO has been enabled
+ * @data: eeh device
+ * @userdata: return value
+ *
+ * Tells each device driver that IO ports, MMIO and config space I/O
+ * are now enabled. Collects up and merges the device driver responses.
+ * Cumulative response passed back in "userdata".
+ */
+static void *eeh_report_mmio_enabled(void *data, void *userdata)
+{
+ struct eeh_dev *edev = (struct eeh_dev *)data;
+ struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+ enum pci_ers_result rc, *res = userdata;
+ struct pci_driver *driver;
+
+ driver = eeh_pcid_get(dev);
+ if (!driver) return NULL;
+
+ if (!driver->err_handler ||
+ !driver->err_handler->mmio_enabled) {
+ eeh_pcid_put(dev);
+ return NULL;
+ }
+
+ rc = driver->err_handler->mmio_enabled(dev);
+
+ /* A driver that needs a reset trumps all others */
+ if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
+ if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+
+ eeh_pcid_put(dev);
+ return NULL;
+}
+
+/**
+ * eeh_report_reset - Tell device that slot has been reset
+ * @data: eeh device
+ * @userdata: return value
+ *
+ * This routine must be called while EEH tries to reset particular
+ * PCI device so that the associated PCI device driver could take
+ * some actions, usually to save data the driver needs so that the
+ * driver can work again while the device is recovered.
+ */
+static void *eeh_report_reset(void *data, void *userdata)
+{
+ struct eeh_dev *edev = (struct eeh_dev *)data;
+ struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+ enum pci_ers_result rc, *res = userdata;
+ struct pci_driver *driver;
+
+ if (!dev) return NULL;
+ dev->error_state = pci_channel_io_normal;
+
+ driver = eeh_pcid_get(dev);
+ if (!driver) return NULL;
+
+ eeh_enable_irq(dev);
+
+ if (!driver->err_handler ||
+ !driver->err_handler->slot_reset) {
+ eeh_pcid_put(dev);
+ return NULL;
+ }
+
+ rc = driver->err_handler->slot_reset(dev);
+ if ((*res == PCI_ERS_RESULT_NONE) ||
+ (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
+ if (*res == PCI_ERS_RESULT_DISCONNECT &&
+ rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
+
+ eeh_pcid_put(dev);
+ return NULL;
+}
+
+/**
+ * eeh_report_resume - Tell device to resume normal operations
+ * @data: eeh device
+ * @userdata: return value
+ *
+ * This routine must be called to notify the device driver that it
+ * could resume so that the device driver can do some initialization
+ * to make the recovered device work again.
+ */
+static void *eeh_report_resume(void *data, void *userdata)
+{
+ struct eeh_dev *edev = (struct eeh_dev *)data;
+ struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+ struct pci_driver *driver;
+
+ if (!dev) return NULL;
+ dev->error_state = pci_channel_io_normal;
+
+ driver = eeh_pcid_get(dev);
+ if (!driver) return NULL;
+
+ eeh_enable_irq(dev);
+
+ if (!driver->err_handler ||
+ !driver->err_handler->resume) {
+ eeh_pcid_put(dev);
+ return NULL;
+ }
+
+ driver->err_handler->resume(dev);
+
+ eeh_pcid_put(dev);
+ return NULL;
+}
+
+/**
+ * eeh_report_failure - Tell device driver that device is dead.
+ * @data: eeh device
+ * @userdata: return value
+ *
+ * This informs the device driver that the device is permanently
+ * dead, and that no further recovery attempts will be made on it.
+ */
+static void *eeh_report_failure(void *data, void *userdata)
+{
+ struct eeh_dev *edev = (struct eeh_dev *)data;
+ struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+ struct pci_driver *driver;
+
+ if (!dev) return NULL;
+ dev->error_state = pci_channel_io_perm_failure;
+
+ driver = eeh_pcid_get(dev);
+ if (!driver) return NULL;
+
+ eeh_disable_irq(dev);
+
+ if (!driver->err_handler ||
+ !driver->err_handler->error_detected) {
+ eeh_pcid_put(dev);
+ return NULL;
+ }
+
+ driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
+
+ eeh_pcid_put(dev);
+ return NULL;
+}
+
+/**
+ * eeh_reset_device - Perform actual reset of a pci slot
+ * @pe: EEH PE
+ * @bus: PCI bus corresponding to the isolcated slot
+ *
+ * This routine must be called to do reset on the indicated PE.
+ * During the reset, udev might be invoked because those affected
+ * PCI devices will be removed and then added.
+ */
+static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
+{
+ int cnt, rc;
+
+ /* pcibios will clear the counter; save the value */
+ cnt = pe->freeze_count;
+
+ /*
+ * We don't remove the corresponding PE instances because
+ * we need the information afterwords. The attached EEH
+ * devices are expected to be attached soon when calling
+ * into pcibios_add_pci_devices().
+ */
+ if (bus)
+ __pcibios_remove_pci_devices(bus, 0);
+
+ /* Reset the pci controller. (Asserts RST#; resets config space).
+ * Reconfigure bridges and devices. Don't try to bring the system
+ * up if the reset failed for some reason.
+ */
+ rc = eeh_reset_pe(pe);
+ if (rc)
+ return rc;
+
+ /* Restore PE */
+ eeh_ops->configure_bridge(pe);
+ eeh_pe_restore_bars(pe);
+
+ /* Give the system 5 seconds to finish running the user-space
+ * hotplug shutdown scripts, e.g. ifdown for ethernet. Yes,
+ * this is a hack, but if we don't do this, and try to bring
+ * the device up before the scripts have taken it down,
+ * potentially weird things happen.
+ */
+ if (bus) {
+ ssleep(5);
+ pcibios_add_pci_devices(bus);
+ }
+ pe->freeze_count = cnt;
+
+ return 0;
+}
+
+/* The longest amount of time to wait for a pci device
+ * to come back on line, in seconds.
+ */
+#define MAX_WAIT_FOR_RECOVERY 150
+
+/**
+ * eeh_handle_event - Reset a PCI device after hard lockup.
+ * @pe: EEH PE
+ *
+ * While PHB detects address or data parity errors on particular PCI
+ * slot, the associated PE will be frozen. Besides, DMA's occurring
+ * to wild addresses (which usually happen due to bugs in device
+ * drivers or in PCI adapter firmware) can cause EEH error. #SERR,
+ * #PERR or other misc PCI-related errors also can trigger EEH errors.
+ *
+ * Recovery process consists of unplugging the device driver (which
+ * generated hotplug events to userspace), then issuing a PCI #RST to
+ * the device, then reconfiguring the PCI config space for all bridges
+ * & devices under this slot, and then finally restarting the device
+ * drivers (which cause a second set of hotplug events to go out to
+ * userspace).
+ */
+void eeh_handle_event(struct eeh_pe *pe)
+{
+ struct pci_bus *frozen_bus;
+ int rc = 0;
+ enum pci_ers_result result = PCI_ERS_RESULT_NONE;
+
+ frozen_bus = eeh_pe_bus_get(pe);
+ if (!frozen_bus) {
+ pr_err("%s: Cannot find PCI bus for PHB#%d-PE#%x\n",
+ __func__, pe->phb->global_number, pe->addr);
+ return;
+ }
+
+ pe->freeze_count++;
+ if (pe->freeze_count > EEH_MAX_ALLOWED_FREEZES)
+ goto excess_failures;
+ pr_warning("EEH: This PCI device has failed %d times in the last hour\n",
+ pe->freeze_count);
+
+ /* Walk the various device drivers attached to this slot through
+ * a reset sequence, giving each an opportunity to do what it needs
+ * to accomplish the reset. Each child gets a report of the
+ * status ... if any child can't handle the reset, then the entire
+ * slot is dlpar removed and added.
+ */
+ eeh_pe_dev_traverse(pe, eeh_report_error, &result);
+
+ /* Get the current PCI slot state. This can take a long time,
+ * sometimes over 3 seconds for certain systems.
+ */
+ rc = eeh_ops->wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000);
+ if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) {
+ printk(KERN_WARNING "EEH: Permanent failure\n");
+ goto hard_fail;
+ }
+
+ /* Since rtas may enable MMIO when posting the error log,
+ * don't post the error log until after all dev drivers
+ * have been informed.
+ */
+ eeh_slot_error_detail(pe, EEH_LOG_TEMP);
+
+ /* If all device drivers were EEH-unaware, then shut
+ * down all of the device drivers, and hope they
+ * go down willingly, without panicing the system.
+ */
+ if (result == PCI_ERS_RESULT_NONE) {
+ rc = eeh_reset_device(pe, frozen_bus);
+ if (rc) {
+ printk(KERN_WARNING "EEH: Unable to reset, rc=%d\n", rc);
+ goto hard_fail;
+ }
+ }
+
+ /* If all devices reported they can proceed, then re-enable MMIO */
+ if (result == PCI_ERS_RESULT_CAN_RECOVER) {
+ rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
+
+ if (rc < 0)
+ goto hard_fail;
+ if (rc) {
+ result = PCI_ERS_RESULT_NEED_RESET;
+ } else {
+ result = PCI_ERS_RESULT_NONE;
+ eeh_pe_dev_traverse(pe, eeh_report_mmio_enabled, &result);
+ }
+ }
+
+ /* If all devices reported they can proceed, then re-enable DMA */
+ if (result == PCI_ERS_RESULT_CAN_RECOVER) {
+ rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA);
+
+ if (rc < 0)
+ goto hard_fail;
+ if (rc)
+ result = PCI_ERS_RESULT_NEED_RESET;
+ else
+ result = PCI_ERS_RESULT_RECOVERED;
+ }
+
+ /* If any device has a hard failure, then shut off everything. */
+ if (result == PCI_ERS_RESULT_DISCONNECT) {
+ printk(KERN_WARNING "EEH: Device driver gave up\n");
+ goto hard_fail;
+ }
+
+ /* If any device called out for a reset, then reset the slot */
+ if (result == PCI_ERS_RESULT_NEED_RESET) {
+ rc = eeh_reset_device(pe, NULL);
+ if (rc) {
+ printk(KERN_WARNING "EEH: Cannot reset, rc=%d\n", rc);
+ goto hard_fail;
+ }
+ result = PCI_ERS_RESULT_NONE;
+ eeh_pe_dev_traverse(pe, eeh_report_reset, &result);
+ }
+
+ /* All devices should claim they have recovered by now. */
+ if ((result != PCI_ERS_RESULT_RECOVERED) &&
+ (result != PCI_ERS_RESULT_NONE)) {
+ printk(KERN_WARNING "EEH: Not recovered\n");
+ goto hard_fail;
+ }
+
+ /* Tell all device drivers that they can resume operations */
+ eeh_pe_dev_traverse(pe, eeh_report_resume, NULL);
+
+ return;
+
+excess_failures:
+ /*
+ * About 90% of all real-life EEH failures in the field
+ * are due to poorly seated PCI cards. Only 10% or so are
+ * due to actual, failed cards.
+ */
+ pr_err("EEH: PHB#%d-PE#%x has failed %d times in the\n"
+ "last hour and has been permanently disabled.\n"
+ "Please try reseating or replacing it.\n",
+ pe->phb->global_number, pe->addr,
+ pe->freeze_count);
+ goto perm_error;
+
+hard_fail:
+ pr_err("EEH: Unable to recover from failure from PHB#%d-PE#%x.\n"
+ "Please try reseating or replacing it\n",
+ pe->phb->global_number, pe->addr);
+
+perm_error:
+ eeh_slot_error_detail(pe, EEH_LOG_PERM);
+
+ /* Notify all devices that they're about to go down. */
+ eeh_pe_dev_traverse(pe, eeh_report_failure, NULL);
+
+ /* Shut down the device drivers for good. */
+ if (frozen_bus)
+ pcibios_remove_pci_devices(frozen_bus);
+}
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2005 Linas Vepstas <linas@linas.org>
+ */
+
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/kthread.h>
+#include <asm/eeh_event.h>
+#include <asm/ppc-pci.h>
+
+/** Overview:
+ * EEH error states may be detected within exception handlers;
+ * however, the recovery processing needs to occur asynchronously
+ * in a normal kernel context and not an interrupt context.
+ * This pair of routines creates an event and queues it onto a
+ * work-queue, where a worker thread can drive recovery.
+ */
+
+/* EEH event workqueue setup. */
+static DEFINE_SPINLOCK(eeh_eventlist_lock);
+LIST_HEAD(eeh_eventlist);
+static void eeh_thread_launcher(struct work_struct *);
+DECLARE_WORK(eeh_event_wq, eeh_thread_launcher);
+
+/* Serialize reset sequences for a given pci device */
+DEFINE_MUTEX(eeh_event_mutex);
+
+/**
+ * eeh_event_handler - Dispatch EEH events.
+ * @dummy - unused
+ *
+ * The detection of a frozen slot can occur inside an interrupt,
+ * where it can be hard to do anything about it. The goal of this
+ * routine is to pull these detection events out of the context
+ * of the interrupt handler, and re-dispatch them for processing
+ * at a later time in a normal context.
+ */
+static int eeh_event_handler(void * dummy)
+{
+ unsigned long flags;
+ struct eeh_event *event;
+ struct eeh_pe *pe;
+
+ spin_lock_irqsave(&eeh_eventlist_lock, flags);
+ event = NULL;
+
+ /* Unqueue the event, get ready to process. */
+ if (!list_empty(&eeh_eventlist)) {
+ event = list_entry(eeh_eventlist.next, struct eeh_event, list);
+ list_del(&event->list);
+ }
+ spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+
+ if (event == NULL)
+ return 0;
+
+ /* Serialize processing of EEH events */
+ mutex_lock(&eeh_event_mutex);
+ pe = event->pe;
+ eeh_pe_state_mark(pe, EEH_PE_RECOVERING);
+ pr_info("EEH: Detected PCI bus error on PHB#%d-PE#%x\n",
+ pe->phb->global_number, pe->addr);
+
+ set_current_state(TASK_INTERRUPTIBLE); /* Don't add to load average */
+ eeh_handle_event(pe);
+ eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
+
+ kfree(event);
+ mutex_unlock(&eeh_event_mutex);
+
+ /* If there are no new errors after an hour, clear the counter. */
+ if (pe && pe->freeze_count > 0) {
+ msleep_interruptible(3600*1000);
+ if (pe->freeze_count > 0)
+ pe->freeze_count--;
+
+ }
+
+ return 0;
+}
+
+/**
+ * eeh_thread_launcher - Start kernel thread to handle EEH events
+ * @dummy - unused
+ *
+ * This routine is called to start the kernel thread for processing
+ * EEH event.
+ */
+static void eeh_thread_launcher(struct work_struct *dummy)
+{
+ if (IS_ERR(kthread_run(eeh_event_handler, NULL, "eehd")))
+ printk(KERN_ERR "Failed to start EEH daemon\n");
+}
+
+/**
+ * eeh_send_failure_event - Generate a PCI error event
+ * @pe: EEH PE
+ *
+ * This routine can be called within an interrupt context;
+ * the actual event will be delivered in a normal context
+ * (from a workqueue).
+ */
+int eeh_send_failure_event(struct eeh_pe *pe)
+{
+ unsigned long flags;
+ struct eeh_event *event;
+
+ event = kzalloc(sizeof(*event), GFP_ATOMIC);
+ if (!event) {
+ pr_err("EEH: out of memory, event not handled\n");
+ return -ENOMEM;
+ }
+ event->pe = pe;
+
+ /* We may or may not be called in an interrupt context */
+ spin_lock_irqsave(&eeh_eventlist_lock, flags);
+ list_add(&event->list, &eeh_eventlist);
+ spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+
+ schedule_work(&eeh_event_wq);
+
+ return 0;
+}
--- /dev/null
+/*
+ * The file intends to implement PE based on the information from
+ * platforms. Basically, there have 3 types of PEs: PHB/Bus/Device.
+ * All the PEs should be organized as hierarchy tree. The first level
+ * of the tree will be associated to existing PHBs since the particular
+ * PE is only meaningful in one PHB domain.
+ *
+ * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2012.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/export.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+
+static LIST_HEAD(eeh_phb_pe);
+
+/**
+ * eeh_pe_alloc - Allocate PE
+ * @phb: PCI controller
+ * @type: PE type
+ *
+ * Allocate PE instance dynamically.
+ */
+static struct eeh_pe *eeh_pe_alloc(struct pci_controller *phb, int type)
+{
+ struct eeh_pe *pe;
+
+ /* Allocate PHB PE */
+ pe = kzalloc(sizeof(struct eeh_pe), GFP_KERNEL);
+ if (!pe) return NULL;
+
+ /* Initialize PHB PE */
+ pe->type = type;
+ pe->phb = phb;
+ INIT_LIST_HEAD(&pe->child_list);
+ INIT_LIST_HEAD(&pe->child);
+ INIT_LIST_HEAD(&pe->edevs);
+
+ return pe;
+}
+
+/**
+ * eeh_phb_pe_create - Create PHB PE
+ * @phb: PCI controller
+ *
+ * The function should be called while the PHB is detected during
+ * system boot or PCI hotplug in order to create PHB PE.
+ */
+int eeh_phb_pe_create(struct pci_controller *phb)
+{
+ struct eeh_pe *pe;
+
+ /* Allocate PHB PE */
+ pe = eeh_pe_alloc(phb, EEH_PE_PHB);
+ if (!pe) {
+ pr_err("%s: out of memory!\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* Put it into the list */
+ eeh_lock();
+ list_add_tail(&pe->child, &eeh_phb_pe);
+ eeh_unlock();
+
+ pr_debug("EEH: Add PE for PHB#%d\n", phb->global_number);
+
+ return 0;
+}
+
+/**
+ * eeh_phb_pe_get - Retrieve PHB PE based on the given PHB
+ * @phb: PCI controller
+ *
+ * The overall PEs form hierarchy tree. The first layer of the
+ * hierarchy tree is composed of PHB PEs. The function is used
+ * to retrieve the corresponding PHB PE according to the given PHB.
+ */
+static struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb)
+{
+ struct eeh_pe *pe;
+
+ list_for_each_entry(pe, &eeh_phb_pe, child) {
+ /*
+ * Actually, we needn't check the type since
+ * the PE for PHB has been determined when that
+ * was created.
+ */
+ if ((pe->type & EEH_PE_PHB) && pe->phb == phb)
+ return pe;
+ }
+
+ return NULL;
+}
+
+/**
+ * eeh_pe_next - Retrieve the next PE in the tree
+ * @pe: current PE
+ * @root: root PE
+ *
+ * The function is used to retrieve the next PE in the
+ * hierarchy PE tree.
+ */
+static struct eeh_pe *eeh_pe_next(struct eeh_pe *pe,
+ struct eeh_pe *root)
+{
+ struct list_head *next = pe->child_list.next;
+
+ if (next == &pe->child_list) {
+ while (1) {
+ if (pe == root)
+ return NULL;
+ next = pe->child.next;
+ if (next != &pe->parent->child_list)
+ break;
+ pe = pe->parent;
+ }
+ }
+
+ return list_entry(next, struct eeh_pe, child);
+}
+
+/**
+ * eeh_pe_traverse - Traverse PEs in the specified PHB
+ * @root: root PE
+ * @fn: callback
+ * @flag: extra parameter to callback
+ *
+ * The function is used to traverse the specified PE and its
+ * child PEs. The traversing is to be terminated once the
+ * callback returns something other than NULL, or no more PEs
+ * to be traversed.
+ */
+static void *eeh_pe_traverse(struct eeh_pe *root,
+ eeh_traverse_func fn, void *flag)
+{
+ struct eeh_pe *pe;
+ void *ret;
+
+ for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
+ ret = fn(pe, flag);
+ if (ret) return ret;
+ }
+
+ return NULL;
+}
+
+/**
+ * eeh_pe_dev_traverse - Traverse the devices from the PE
+ * @root: EEH PE
+ * @fn: function callback
+ * @flag: extra parameter to callback
+ *
+ * The function is used to traverse the devices of the specified
+ * PE and its child PEs.
+ */
+void *eeh_pe_dev_traverse(struct eeh_pe *root,
+ eeh_traverse_func fn, void *flag)
+{
+ struct eeh_pe *pe;
+ struct eeh_dev *edev;
+ void *ret;
+
+ if (!root) {
+ pr_warning("%s: Invalid PE %p\n", __func__, root);
+ return NULL;
+ }
+
+ eeh_lock();
+
+ /* Traverse root PE */
+ for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
+ eeh_pe_for_each_dev(pe, edev) {
+ ret = fn(edev, flag);
+ if (ret) {
+ eeh_unlock();
+ return ret;
+ }
+ }
+ }
+
+ eeh_unlock();
+
+ return NULL;
+}
+
+/**
+ * __eeh_pe_get - Check the PE address
+ * @data: EEH PE
+ * @flag: EEH device
+ *
+ * For one particular PE, it can be identified by PE address
+ * or tranditional BDF address. BDF address is composed of
+ * Bus/Device/Function number. The extra data referred by flag
+ * indicates which type of address should be used.
+ */
+static void *__eeh_pe_get(void *data, void *flag)
+{
+ struct eeh_pe *pe = (struct eeh_pe *)data;
+ struct eeh_dev *edev = (struct eeh_dev *)flag;
+
+ /* Unexpected PHB PE */
+ if (pe->type & EEH_PE_PHB)
+ return NULL;
+
+ /* We prefer PE address */
+ if (edev->pe_config_addr &&
+ (edev->pe_config_addr == pe->addr))
+ return pe;
+
+ /* Try BDF address */
+ if (edev->pe_config_addr &&
+ (edev->config_addr == pe->config_addr))
+ return pe;
+
+ return NULL;
+}
+
+/**
+ * eeh_pe_get - Search PE based on the given address
+ * @edev: EEH device
+ *
+ * Search the corresponding PE based on the specified address which
+ * is included in the eeh device. The function is used to check if
+ * the associated PE has been created against the PE address. It's
+ * notable that the PE address has 2 format: traditional PE address
+ * which is composed of PCI bus/device/function number, or unified
+ * PE address.
+ */
+static struct eeh_pe *eeh_pe_get(struct eeh_dev *edev)
+{
+ struct eeh_pe *root = eeh_phb_pe_get(edev->phb);
+ struct eeh_pe *pe;
+
+ pe = eeh_pe_traverse(root, __eeh_pe_get, edev);
+
+ return pe;
+}
+
+/**
+ * eeh_pe_get_parent - Retrieve the parent PE
+ * @edev: EEH device
+ *
+ * The whole PEs existing in the system are organized as hierarchy
+ * tree. The function is used to retrieve the parent PE according
+ * to the parent EEH device.
+ */
+static struct eeh_pe *eeh_pe_get_parent(struct eeh_dev *edev)
+{
+ struct device_node *dn;
+ struct eeh_dev *parent;
+
+ /*
+ * It might have the case for the indirect parent
+ * EEH device already having associated PE, but
+ * the direct parent EEH device doesn't have yet.
+ */
+ dn = edev->dn->parent;
+ while (dn) {
+ /* We're poking out of PCI territory */
+ if (!PCI_DN(dn)) return NULL;
+
+ parent = of_node_to_eeh_dev(dn);
+ /* We're poking out of PCI territory */
+ if (!parent) return NULL;
+
+ if (parent->pe)
+ return parent->pe;
+
+ dn = dn->parent;
+ }
+
+ return NULL;
+}
+
+/**
+ * eeh_add_to_parent_pe - Add EEH device to parent PE
+ * @edev: EEH device
+ *
+ * Add EEH device to the parent PE. If the parent PE already
+ * exists, the PE type will be changed to EEH_PE_BUS. Otherwise,
+ * we have to create new PE to hold the EEH device and the new
+ * PE will be linked to its parent PE as well.
+ */
+int eeh_add_to_parent_pe(struct eeh_dev *edev)
+{
+ struct eeh_pe *pe, *parent;
+
+ eeh_lock();
+
+ /*
+ * Search the PE has been existing or not according
+ * to the PE address. If that has been existing, the
+ * PE should be composed of PCI bus and its subordinate
+ * components.
+ */
+ pe = eeh_pe_get(edev);
+ if (pe && !(pe->type & EEH_PE_INVALID)) {
+ if (!edev->pe_config_addr) {
+ eeh_unlock();
+ pr_err("%s: PE with addr 0x%x already exists\n",
+ __func__, edev->config_addr);
+ return -EEXIST;
+ }
+
+ /* Mark the PE as type of PCI bus */
+ pe->type = EEH_PE_BUS;
+ edev->pe = pe;
+
+ /* Put the edev to PE */
+ list_add_tail(&edev->list, &pe->edevs);
+ eeh_unlock();
+ pr_debug("EEH: Add %s to Bus PE#%x\n",
+ edev->dn->full_name, pe->addr);
+
+ return 0;
+ } else if (pe && (pe->type & EEH_PE_INVALID)) {
+ list_add_tail(&edev->list, &pe->edevs);
+ edev->pe = pe;
+ /*
+ * We're running to here because of PCI hotplug caused by
+ * EEH recovery. We need clear EEH_PE_INVALID until the top.
+ */
+ parent = pe;
+ while (parent) {
+ if (!(parent->type & EEH_PE_INVALID))
+ break;
+ parent->type &= ~EEH_PE_INVALID;
+ parent = parent->parent;
+ }
+ eeh_unlock();
+ pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
+ edev->dn->full_name, pe->addr, pe->parent->addr);
+
+ return 0;
+ }
+
+ /* Create a new EEH PE */
+ pe = eeh_pe_alloc(edev->phb, EEH_PE_DEVICE);
+ if (!pe) {
+ eeh_unlock();
+ pr_err("%s: out of memory!\n", __func__);
+ return -ENOMEM;
+ }
+ pe->addr = edev->pe_config_addr;
+ pe->config_addr = edev->config_addr;
+
+ /*
+ * Put the new EEH PE into hierarchy tree. If the parent
+ * can't be found, the newly created PE will be attached
+ * to PHB directly. Otherwise, we have to associate the
+ * PE with its parent.
+ */
+ parent = eeh_pe_get_parent(edev);
+ if (!parent) {
+ parent = eeh_phb_pe_get(edev->phb);
+ if (!parent) {
+ eeh_unlock();
+ pr_err("%s: No PHB PE is found (PHB Domain=%d)\n",
+ __func__, edev->phb->global_number);
+ edev->pe = NULL;
+ kfree(pe);
+ return -EEXIST;
+ }
+ }
+ pe->parent = parent;
+
+ /*
+ * Put the newly created PE into the child list and
+ * link the EEH device accordingly.
+ */
+ list_add_tail(&pe->child, &parent->child_list);
+ list_add_tail(&edev->list, &pe->edevs);
+ edev->pe = pe;
+ eeh_unlock();
+ pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
+ edev->dn->full_name, pe->addr, pe->parent->addr);
+
+ return 0;
+}
+
+/**
+ * eeh_rmv_from_parent_pe - Remove one EEH device from the associated PE
+ * @edev: EEH device
+ * @purge_pe: remove PE or not
+ *
+ * The PE hierarchy tree might be changed when doing PCI hotplug.
+ * Also, the PCI devices or buses could be removed from the system
+ * during EEH recovery. So we have to call the function remove the
+ * corresponding PE accordingly if necessary.
+ */
+int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
+{
+ struct eeh_pe *pe, *parent, *child;
+ int cnt;
+
+ if (!edev->pe) {
+ pr_warning("%s: No PE found for EEH device %s\n",
+ __func__, edev->dn->full_name);
+ return -EEXIST;
+ }
+
+ eeh_lock();
+
+ /* Remove the EEH device */
+ pe = edev->pe;
+ edev->pe = NULL;
+ list_del(&edev->list);
+
+ /*
+ * Check if the parent PE includes any EEH devices.
+ * If not, we should delete that. Also, we should
+ * delete the parent PE if it doesn't have associated
+ * child PEs and EEH devices.
+ */
+ while (1) {
+ parent = pe->parent;
+ if (pe->type & EEH_PE_PHB)
+ break;
+
+ if (purge_pe) {
+ if (list_empty(&pe->edevs) &&
+ list_empty(&pe->child_list)) {
+ list_del(&pe->child);
+ kfree(pe);
+ } else {
+ break;
+ }
+ } else {
+ if (list_empty(&pe->edevs)) {
+ cnt = 0;
+ list_for_each_entry(child, &pe->child_list, child) {
+ if (!(child->type & EEH_PE_INVALID)) {
+ cnt++;
+ break;
+ }
+ }
+
+ if (!cnt)
+ pe->type |= EEH_PE_INVALID;
+ else
+ break;
+ }
+ }
+
+ pe = parent;
+ }
+
+ eeh_unlock();
+
+ return 0;
+}
+
+/**
+ * __eeh_pe_state_mark - Mark the state for the PE
+ * @data: EEH PE
+ * @flag: state
+ *
+ * The function is used to mark the indicated state for the given
+ * PE. Also, the associated PCI devices will be put into IO frozen
+ * state as well.
+ */
+static void *__eeh_pe_state_mark(void *data, void *flag)
+{
+ struct eeh_pe *pe = (struct eeh_pe *)data;
+ int state = *((int *)flag);
+ struct eeh_dev *tmp;
+ struct pci_dev *pdev;
+
+ /*
+ * Mark the PE with the indicated state. Also,
+ * the associated PCI device will be put into
+ * I/O frozen state to avoid I/O accesses from
+ * the PCI device driver.
+ */
+ pe->state |= state;
+ eeh_pe_for_each_dev(pe, tmp) {
+ pdev = eeh_dev_to_pci_dev(tmp);
+ if (pdev)
+ pdev->error_state = pci_channel_io_frozen;
+ }
+
+ return NULL;
+}
+
+/**
+ * eeh_pe_state_mark - Mark specified state for PE and its associated device
+ * @pe: EEH PE
+ *
+ * EEH error affects the current PE and its child PEs. The function
+ * is used to mark appropriate state for the affected PEs and the
+ * associated devices.
+ */
+void eeh_pe_state_mark(struct eeh_pe *pe, int state)
+{
+ eeh_lock();
+ eeh_pe_traverse(pe, __eeh_pe_state_mark, &state);
+ eeh_unlock();
+}
+
+/**
+ * __eeh_pe_state_clear - Clear state for the PE
+ * @data: EEH PE
+ * @flag: state
+ *
+ * The function is used to clear the indicated state from the
+ * given PE. Besides, we also clear the check count of the PE
+ * as well.
+ */
+static void *__eeh_pe_state_clear(void *data, void *flag)
+{
+ struct eeh_pe *pe = (struct eeh_pe *)data;
+ int state = *((int *)flag);
+
+ pe->state &= ~state;
+ pe->check_count = 0;
+
+ return NULL;
+}
+
+/**
+ * eeh_pe_state_clear - Clear state for the PE and its children
+ * @pe: PE
+ * @state: state to be cleared
+ *
+ * When the PE and its children has been recovered from error,
+ * we need clear the error state for that. The function is used
+ * for the purpose.
+ */
+void eeh_pe_state_clear(struct eeh_pe *pe, int state)
+{
+ eeh_lock();
+ eeh_pe_traverse(pe, __eeh_pe_state_clear, &state);
+ eeh_unlock();
+}
+
+/**
+ * eeh_restore_one_device_bars - Restore the Base Address Registers for one device
+ * @data: EEH device
+ * @flag: Unused
+ *
+ * Loads the PCI configuration space base address registers,
+ * the expansion ROM base address, the latency timer, and etc.
+ * from the saved values in the device node.
+ */
+static void *eeh_restore_one_device_bars(void *data, void *flag)
+{
+ int i;
+ u32 cmd;
+ struct eeh_dev *edev = (struct eeh_dev *)data;
+ struct device_node *dn = eeh_dev_to_of_node(edev);
+
+ for (i = 4; i < 10; i++)
+ eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]);
+ /* 12 == Expansion ROM Address */
+ eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]);
+
+#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
+#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
+
+ eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1,
+ SAVED_BYTE(PCI_CACHE_LINE_SIZE));
+ eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1,
+ SAVED_BYTE(PCI_LATENCY_TIMER));
+
+ /* max latency, min grant, interrupt pin and line */
+ eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]);
+
+ /*
+ * Restore PERR & SERR bits, some devices require it,
+ * don't touch the other command bits
+ */
+ eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd);
+ if (edev->config_space[1] & PCI_COMMAND_PARITY)
+ cmd |= PCI_COMMAND_PARITY;
+ else
+ cmd &= ~PCI_COMMAND_PARITY;
+ if (edev->config_space[1] & PCI_COMMAND_SERR)
+ cmd |= PCI_COMMAND_SERR;
+ else
+ cmd &= ~PCI_COMMAND_SERR;
+ eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd);
+
+ return NULL;
+}
+
+/**
+ * eeh_pe_restore_bars - Restore the PCI config space info
+ * @pe: EEH PE
+ *
+ * This routine performs a recursive walk to the children
+ * of this device as well.
+ */
+void eeh_pe_restore_bars(struct eeh_pe *pe)
+{
+ /*
+ * We needn't take the EEH lock since eeh_pe_dev_traverse()
+ * will take that.
+ */
+ eeh_pe_dev_traverse(pe, eeh_restore_one_device_bars, NULL);
+}
+
+/**
+ * eeh_pe_bus_get - Retrieve PCI bus according to the given PE
+ * @pe: EEH PE
+ *
+ * Retrieve the PCI bus according to the given PE. Basically,
+ * there're 3 types of PEs: PHB/Bus/Device. For PHB PE, the
+ * primary PCI bus will be retrieved. The parent bus will be
+ * returned for BUS PE. However, we don't have associated PCI
+ * bus for DEVICE PE.
+ */
+struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe)
+{
+ struct pci_bus *bus = NULL;
+ struct eeh_dev *edev;
+ struct pci_dev *pdev;
+
+ eeh_lock();
+
+ if (pe->type & EEH_PE_PHB) {
+ bus = pe->phb->bus;
+ } else if (pe->type & EEH_PE_BUS ||
+ pe->type & EEH_PE_DEVICE) {
+ edev = list_first_entry(&pe->edevs, struct eeh_dev, list);
+ pdev = eeh_dev_to_pci_dev(edev);
+ if (pdev)
+ bus = pdev->bus;
+ }
+
+ eeh_unlock();
+
+ return bus;
+}
--- /dev/null
+/*
+ * Sysfs entries for PCI Error Recovery for PAPR-compliant platform.
+ * Copyright IBM Corporation 2007
+ * Copyright Linas Vepstas <linas@austin.ibm.com> 2007
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send comments and feedback to Linas Vepstas <linas@austin.ibm.com>
+ */
+#include <linux/pci.h>
+#include <linux/stat.h>
+#include <asm/ppc-pci.h>
+#include <asm/pci-bridge.h>
+
+/**
+ * EEH_SHOW_ATTR -- Create sysfs entry for eeh statistic
+ * @_name: name of file in sysfs directory
+ * @_memb: name of member in struct pci_dn to access
+ * @_format: printf format for display
+ *
+ * All of the attributes look very similar, so just
+ * auto-gen a cut-n-paste routine to display them.
+ */
+#define EEH_SHOW_ATTR(_name,_memb,_format) \
+static ssize_t eeh_show_##_name(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct pci_dev *pdev = to_pci_dev(dev); \
+ struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev); \
+ \
+ if (!edev) \
+ return 0; \
+ \
+ return sprintf(buf, _format "\n", edev->_memb); \
+} \
+static DEVICE_ATTR(_name, S_IRUGO, eeh_show_##_name, NULL);
+
+EEH_SHOW_ATTR(eeh_mode, mode, "0x%x");
+EEH_SHOW_ATTR(eeh_config_addr, config_addr, "0x%x");
+EEH_SHOW_ATTR(eeh_pe_config_addr, pe_config_addr, "0x%x");
+
+void eeh_sysfs_add_device(struct pci_dev *pdev)
+{
+ int rc=0;
+
+ rc += device_create_file(&pdev->dev, &dev_attr_eeh_mode);
+ rc += device_create_file(&pdev->dev, &dev_attr_eeh_config_addr);
+ rc += device_create_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
+
+ if (rc)
+ printk(KERN_WARNING "EEH: Unable to create sysfs entries\n");
+}
+
+void eeh_sysfs_remove_device(struct pci_dev *pdev)
+{
+ device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
+ device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
+ device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
+}
--- /dev/null
+/*
+ * Derived from "arch/powerpc/platforms/pseries/pci_dlpar.c"
+ *
+ * Copyright (C) 2003 Linda Xie <lxie@us.ibm.com>
+ * Copyright (C) 2005 International Business Machines
+ *
+ * Updates, 2005, John Rose <johnrose@austin.ibm.com>
+ * Updates, 2005, Linas Vepstas <linas@austin.ibm.com>
+ * Updates, 2013, Gavin Shan <shangw@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/export.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+#include <asm/firmware.h>
+#include <asm/eeh.h>
+
+/**
+ * __pcibios_remove_pci_devices - remove all devices under this bus
+ * @bus: the indicated PCI bus
+ * @purge_pe: destroy the PE on removal of PCI devices
+ *
+ * Remove all of the PCI devices under this bus both from the
+ * linux pci device tree, and from the powerpc EEH address cache.
+ * By default, the corresponding PE will be destroied during the
+ * normal PCI hotplug path. For PCI hotplug during EEH recovery,
+ * the corresponding PE won't be destroied and deallocated.
+ */
+void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
+{
+ struct pci_dev *dev, *tmp;
+ struct pci_bus *child_bus;
+
+ /* First go down child busses */
+ list_for_each_entry(child_bus, &bus->children, node)
+ __pcibios_remove_pci_devices(child_bus, purge_pe);
+
+ pr_debug("PCI: Removing devices on bus %04x:%02x\n",
+ pci_domain_nr(bus), bus->number);
+ list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
+ pr_debug(" * Removing %s...\n", pci_name(dev));
+ eeh_remove_bus_device(dev, purge_pe);
+ pci_stop_and_remove_bus_device(dev);
+ }
+}
+
+/**
+ * pcibios_remove_pci_devices - remove all devices under this bus
+ * @bus: the indicated PCI bus
+ *
+ * Remove all of the PCI devices under this bus both from the
+ * linux pci device tree, and from the powerpc EEH address cache.
+ */
+void pcibios_remove_pci_devices(struct pci_bus *bus)
+{
+ __pcibios_remove_pci_devices(bus, 1);
+}
+EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
+
+/**
+ * pcibios_add_pci_devices - adds new pci devices to bus
+ * @bus: the indicated PCI bus
+ *
+ * This routine will find and fixup new pci devices under
+ * the indicated bus. This routine presumes that there
+ * might already be some devices under this bridge, so
+ * it carefully tries to add only new devices. (And that
+ * is how this routine differs from other, similar pcibios
+ * routines.)
+ */
+void pcibios_add_pci_devices(struct pci_bus * bus)
+{
+ int slotno, num, mode, pass, max;
+ struct pci_dev *dev;
+ struct device_node *dn = pci_bus_to_OF_node(bus);
+
+ eeh_add_device_tree_early(dn);
+
+ mode = PCI_PROBE_NORMAL;
+ if (ppc_md.pci_probe_mode)
+ mode = ppc_md.pci_probe_mode(bus);
+
+ if (mode == PCI_PROBE_DEVTREE) {
+ /* use ofdt-based probe */
+ of_rescan_bus(dn, bus);
+ } else if (mode == PCI_PROBE_NORMAL) {
+ /* use legacy probe */
+ slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
+ num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
+ if (!num)
+ return;
+ pcibios_setup_bus_devices(bus);
+ max = bus->busn_res.start;
+ for (pass = 0; pass < 2; pass++) {
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
+ dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
+ max = pci_scan_bridge(bus, dev,
+ max, pass);
+ }
+ }
+ }
+ pcibios_finish_adding_to_bus(bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
help
Bus device driver for GX bus based adapters.
+config EEH
+ bool
+ depends on (PPC_POWERNV || PPC_PSERIES) && PCI
+ default y
+
config PPC_MPC106
bool
default n
processors, that is, which share physical processors between
two or more partitions.
-config EEH
- bool
- depends on PPC_PSERIES && PCI
- default y
-
config PSERIES_MSI
bool
depends on PCI_MSI && EEH
firmware.o power.o dlpar.o mobility.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SCANLOG) += scanlog.o
-obj-$(CONFIG_EEH) += eeh.o eeh_pe.o eeh_dev.o eeh_cache.o \
- eeh_driver.o eeh_event.o eeh_sysfs.o \
- eeh_pseries.o
+obj-$(CONFIG_EEH) += eeh_pseries.o
obj-$(CONFIG_KEXEC) += kexec.o
obj-$(CONFIG_PCI) += pci.o pci_dlpar.o
obj-$(CONFIG_PSERIES_MSI) += msi.o
+++ /dev/null
-/*
- * Copyright IBM Corporation 2001, 2005, 2006
- * Copyright Dave Engebretsen & Todd Inglett 2001
- * Copyright Linas Vepstas 2005, 2006
- * Copyright 2001-2012 IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Please address comments and feedback to Linas Vepstas <linas@austin.ibm.com>
- */
-
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-#include <linux/rbtree.h>
-#include <linux/seq_file.h>
-#include <linux/spinlock.h>
-#include <linux/export.h>
-#include <linux/of.h>
-
-#include <linux/atomic.h>
-#include <asm/eeh.h>
-#include <asm/eeh_event.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ppc-pci.h>
-#include <asm/rtas.h>
-
-
-/** Overview:
- * EEH, or "Extended Error Handling" is a PCI bridge technology for
- * dealing with PCI bus errors that can't be dealt with within the
- * usual PCI framework, except by check-stopping the CPU. Systems
- * that are designed for high-availability/reliability cannot afford
- * to crash due to a "mere" PCI error, thus the need for EEH.
- * An EEH-capable bridge operates by converting a detected error
- * into a "slot freeze", taking the PCI adapter off-line, making
- * the slot behave, from the OS'es point of view, as if the slot
- * were "empty": all reads return 0xff's and all writes are silently
- * ignored. EEH slot isolation events can be triggered by parity
- * errors on the address or data busses (e.g. during posted writes),
- * which in turn might be caused by low voltage on the bus, dust,
- * vibration, humidity, radioactivity or plain-old failed hardware.
- *
- * Note, however, that one of the leading causes of EEH slot
- * freeze events are buggy device drivers, buggy device microcode,
- * or buggy device hardware. This is because any attempt by the
- * device to bus-master data to a memory address that is not
- * assigned to the device will trigger a slot freeze. (The idea
- * is to prevent devices-gone-wild from corrupting system memory).
- * Buggy hardware/drivers will have a miserable time co-existing
- * with EEH.
- *
- * Ideally, a PCI device driver, when suspecting that an isolation
- * event has occurred (e.g. by reading 0xff's), will then ask EEH
- * whether this is the case, and then take appropriate steps to
- * reset the PCI slot, the PCI device, and then resume operations.
- * However, until that day, the checking is done here, with the
- * eeh_check_failure() routine embedded in the MMIO macros. If
- * the slot is found to be isolated, an "EEH Event" is synthesized
- * and sent out for processing.
- */
-
-/* If a device driver keeps reading an MMIO register in an interrupt
- * handler after a slot isolation event, it might be broken.
- * This sets the threshold for how many read attempts we allow
- * before printing an error message.
- */
-#define EEH_MAX_FAILS 2100000
-
-/* Time to wait for a PCI slot to report status, in milliseconds */
-#define PCI_BUS_RESET_WAIT_MSEC (60*1000)
-
-/* Platform dependent EEH operations */
-struct eeh_ops *eeh_ops = NULL;
-
-int eeh_subsystem_enabled;
-EXPORT_SYMBOL(eeh_subsystem_enabled);
-
-/*
- * EEH probe mode support. The intention is to support multiple
- * platforms for EEH. Some platforms like pSeries do PCI emunation
- * based on device tree. However, other platforms like powernv probe
- * PCI devices from hardware. The flag is used to distinguish that.
- * In addition, struct eeh_ops::probe would be invoked for particular
- * OF node or PCI device so that the corresponding PE would be created
- * there.
- */
-int eeh_probe_mode;
-
-/* Global EEH mutex */
-DEFINE_MUTEX(eeh_mutex);
-
-/* Lock to avoid races due to multiple reports of an error */
-static DEFINE_RAW_SPINLOCK(confirm_error_lock);
-
-/* Buffer for reporting pci register dumps. Its here in BSS, and
- * not dynamically alloced, so that it ends up in RMO where RTAS
- * can access it.
- */
-#define EEH_PCI_REGS_LOG_LEN 4096
-static unsigned char pci_regs_buf[EEH_PCI_REGS_LOG_LEN];
-
-/*
- * The struct is used to maintain the EEH global statistic
- * information. Besides, the EEH global statistics will be
- * exported to user space through procfs
- */
-struct eeh_stats {
- u64 no_device; /* PCI device not found */
- u64 no_dn; /* OF node not found */
- u64 no_cfg_addr; /* Config address not found */
- u64 ignored_check; /* EEH check skipped */
- u64 total_mmio_ffs; /* Total EEH checks */
- u64 false_positives; /* Unnecessary EEH checks */
- u64 slot_resets; /* PE reset */
-};
-
-static struct eeh_stats eeh_stats;
-
-#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
-
-/**
- * eeh_gather_pci_data - Copy assorted PCI config space registers to buff
- * @edev: device to report data for
- * @buf: point to buffer in which to log
- * @len: amount of room in buffer
- *
- * This routine captures assorted PCI configuration space data,
- * and puts them into a buffer for RTAS error logging.
- */
-static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
-{
- struct device_node *dn = eeh_dev_to_of_node(edev);
- struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
- u32 cfg;
- int cap, i;
- int n = 0;
-
- n += scnprintf(buf+n, len-n, "%s\n", dn->full_name);
- printk(KERN_WARNING "EEH: of node=%s\n", dn->full_name);
-
- eeh_ops->read_config(dn, PCI_VENDOR_ID, 4, &cfg);
- n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg);
- printk(KERN_WARNING "EEH: PCI device/vendor: %08x\n", cfg);
-
- eeh_ops->read_config(dn, PCI_COMMAND, 4, &cfg);
- n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
- printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg);
-
- if (!dev) {
- printk(KERN_WARNING "EEH: no PCI device for this of node\n");
- return n;
- }
-
- /* Gather bridge-specific registers */
- if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
- eeh_ops->read_config(dn, PCI_SEC_STATUS, 2, &cfg);
- n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg);
- printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg);
-
- eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &cfg);
- n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg);
- printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg);
- }
-
- /* Dump out the PCI-X command and status regs */
- cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
- if (cap) {
- eeh_ops->read_config(dn, cap, 4, &cfg);
- n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
- printk(KERN_WARNING "EEH: PCI-X cmd: %08x\n", cfg);
-
- eeh_ops->read_config(dn, cap+4, 4, &cfg);
- n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg);
- printk(KERN_WARNING "EEH: PCI-X status: %08x\n", cfg);
- }
-
- /* If PCI-E capable, dump PCI-E cap 10, and the AER */
- cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
- if (cap) {
- n += scnprintf(buf+n, len-n, "pci-e cap10:\n");
- printk(KERN_WARNING
- "EEH: PCI-E capabilities and status follow:\n");
-
- for (i=0; i<=8; i++) {
- eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
- n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
- printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg);
- }
-
- cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
- if (cap) {
- n += scnprintf(buf+n, len-n, "pci-e AER:\n");
- printk(KERN_WARNING
- "EEH: PCI-E AER capability register set follows:\n");
-
- for (i=0; i<14; i++) {
- eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
- n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
- printk(KERN_WARNING "EEH: PCI-E AER %02x: %08x\n", i, cfg);
- }
- }
- }
-
- return n;
-}
-
-/**
- * eeh_slot_error_detail - Generate combined log including driver log and error log
- * @pe: EEH PE
- * @severity: temporary or permanent error log
- *
- * This routine should be called to generate the combined log, which
- * is comprised of driver log and error log. The driver log is figured
- * out from the config space of the corresponding PCI device, while
- * the error log is fetched through platform dependent function call.
- */
-void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
-{
- size_t loglen = 0;
- struct eeh_dev *edev;
-
- eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
- eeh_ops->configure_bridge(pe);
- eeh_pe_restore_bars(pe);
-
- pci_regs_buf[0] = 0;
- eeh_pe_for_each_dev(pe, edev) {
- loglen += eeh_gather_pci_data(edev, pci_regs_buf,
- EEH_PCI_REGS_LOG_LEN);
- }
-
- eeh_ops->get_log(pe, severity, pci_regs_buf, loglen);
-}
-
-/**
- * eeh_token_to_phys - Convert EEH address token to phys address
- * @token: I/O token, should be address in the form 0xA....
- *
- * This routine should be called to convert virtual I/O address
- * to physical one.
- */
-static inline unsigned long eeh_token_to_phys(unsigned long token)
-{
- pte_t *ptep;
- unsigned long pa;
-
- ptep = find_linux_pte(init_mm.pgd, token);
- if (!ptep)
- return token;
- pa = pte_pfn(*ptep) << PAGE_SHIFT;
-
- return pa | (token & (PAGE_SIZE-1));
-}
-
-/**
- * eeh_dev_check_failure - Check if all 1's data is due to EEH slot freeze
- * @edev: eeh device
- *
- * Check for an EEH failure for the given device node. Call this
- * routine if the result of a read was all 0xff's and you want to
- * find out if this is due to an EEH slot freeze. This routine
- * will query firmware for the EEH status.
- *
- * Returns 0 if there has not been an EEH error; otherwise returns
- * a non-zero value and queues up a slot isolation event notification.
- *
- * It is safe to call this routine in an interrupt context.
- */
-int eeh_dev_check_failure(struct eeh_dev *edev)
-{
- int ret;
- unsigned long flags;
- struct device_node *dn;
- struct pci_dev *dev;
- struct eeh_pe *pe;
- int rc = 0;
- const char *location;
-
- eeh_stats.total_mmio_ffs++;
-
- if (!eeh_subsystem_enabled)
- return 0;
-
- if (!edev) {
- eeh_stats.no_dn++;
- return 0;
- }
- dn = eeh_dev_to_of_node(edev);
- dev = eeh_dev_to_pci_dev(edev);
- pe = edev->pe;
-
- /* Access to IO BARs might get this far and still not want checking. */
- if (!pe) {
- eeh_stats.ignored_check++;
- pr_debug("EEH: Ignored check for %s %s\n",
- eeh_pci_name(dev), dn->full_name);
- return 0;
- }
-
- if (!pe->addr && !pe->config_addr) {
- eeh_stats.no_cfg_addr++;
- return 0;
- }
-
- /* If we already have a pending isolation event for this
- * slot, we know it's bad already, we don't need to check.
- * Do this checking under a lock; as multiple PCI devices
- * in one slot might report errors simultaneously, and we
- * only want one error recovery routine running.
- */
- raw_spin_lock_irqsave(&confirm_error_lock, flags);
- rc = 1;
- if (pe->state & EEH_PE_ISOLATED) {
- pe->check_count++;
- if (pe->check_count % EEH_MAX_FAILS == 0) {
- location = of_get_property(dn, "ibm,loc-code", NULL);
- printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
- "location=%s driver=%s pci addr=%s\n",
- pe->check_count, location,
- eeh_driver_name(dev), eeh_pci_name(dev));
- printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
- eeh_driver_name(dev));
- dump_stack();
- }
- goto dn_unlock;
- }
-
- /*
- * Now test for an EEH failure. This is VERY expensive.
- * Note that the eeh_config_addr may be a parent device
- * in the case of a device behind a bridge, or it may be
- * function zero of a multi-function device.
- * In any case they must share a common PHB.
- */
- ret = eeh_ops->get_state(pe, NULL);
-
- /* Note that config-io to empty slots may fail;
- * they are empty when they don't have children.
- * We will punt with the following conditions: Failure to get
- * PE's state, EEH not support and Permanently unavailable
- * state, PE is in good state.
- */
- if ((ret < 0) ||
- (ret == EEH_STATE_NOT_SUPPORT) ||
- (ret & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) ==
- (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) {
- eeh_stats.false_positives++;
- pe->false_positives++;
- rc = 0;
- goto dn_unlock;
- }
-
- eeh_stats.slot_resets++;
-
- /* Avoid repeated reports of this failure, including problems
- * with other functions on this device, and functions under
- * bridges.
- */
- eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
- raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
-
- eeh_send_failure_event(pe);
-
- /* Most EEH events are due to device driver bugs. Having
- * a stack trace will help the device-driver authors figure
- * out what happened. So print that out.
- */
- WARN(1, "EEH: failure detected\n");
- return 1;
-
-dn_unlock:
- raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
- return rc;
-}
-
-EXPORT_SYMBOL_GPL(eeh_dev_check_failure);
-
-/**
- * eeh_check_failure - Check if all 1's data is due to EEH slot freeze
- * @token: I/O token, should be address in the form 0xA....
- * @val: value, should be all 1's (XXX why do we need this arg??)
- *
- * Check for an EEH failure at the given token address. Call this
- * routine if the result of a read was all 0xff's and you want to
- * find out if this is due to an EEH slot freeze event. This routine
- * will query firmware for the EEH status.
- *
- * Note this routine is safe to call in an interrupt context.
- */
-unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
-{
- unsigned long addr;
- struct eeh_dev *edev;
-
- /* Finding the phys addr + pci device; this is pretty quick. */
- addr = eeh_token_to_phys((unsigned long __force) token);
- edev = eeh_addr_cache_get_dev(addr);
- if (!edev) {
- eeh_stats.no_device++;
- return val;
- }
-
- eeh_dev_check_failure(edev);
-
- pci_dev_put(eeh_dev_to_pci_dev(edev));
- return val;
-}
-
-EXPORT_SYMBOL(eeh_check_failure);
-
-
-/**
- * eeh_pci_enable - Enable MMIO or DMA transfers for this slot
- * @pe: EEH PE
- *
- * This routine should be called to reenable frozen MMIO or DMA
- * so that it would work correctly again. It's useful while doing
- * recovery or log collection on the indicated device.
- */
-int eeh_pci_enable(struct eeh_pe *pe, int function)
-{
- int rc;
-
- rc = eeh_ops->set_option(pe, function);
- if (rc)
- pr_warning("%s: Unexpected state change %d on PHB#%d-PE#%x, err=%d\n",
- __func__, function, pe->phb->global_number, pe->addr, rc);
-
- rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
- if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) &&
- (function == EEH_OPT_THAW_MMIO))
- return 0;
-
- return rc;
-}
-
-/**
- * pcibios_set_pcie_slot_reset - Set PCI-E reset state
- * @dev: pci device struct
- * @state: reset state to enter
- *
- * Return value:
- * 0 if success
- */
-int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
-{
- struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
- struct eeh_pe *pe = edev->pe;
-
- if (!pe) {
- pr_err("%s: No PE found on PCI device %s\n",
- __func__, pci_name(dev));
- return -EINVAL;
- }
-
- switch (state) {
- case pcie_deassert_reset:
- eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
- break;
- case pcie_hot_reset:
- eeh_ops->reset(pe, EEH_RESET_HOT);
- break;
- case pcie_warm_reset:
- eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
- break;
- default:
- return -EINVAL;
- };
-
- return 0;
-}
-
-/**
- * eeh_set_pe_freset - Check the required reset for the indicated device
- * @data: EEH device
- * @flag: return value
- *
- * Each device might have its preferred reset type: fundamental or
- * hot reset. The routine is used to collected the information for
- * the indicated device and its children so that the bunch of the
- * devices could be reset properly.
- */
-static void *eeh_set_dev_freset(void *data, void *flag)
-{
- struct pci_dev *dev;
- unsigned int *freset = (unsigned int *)flag;
- struct eeh_dev *edev = (struct eeh_dev *)data;
-
- dev = eeh_dev_to_pci_dev(edev);
- if (dev)
- *freset |= dev->needs_freset;
-
- return NULL;
-}
-
-/**
- * eeh_reset_pe_once - Assert the pci #RST line for 1/4 second
- * @pe: EEH PE
- *
- * Assert the PCI #RST line for 1/4 second.
- */
-static void eeh_reset_pe_once(struct eeh_pe *pe)
-{
- unsigned int freset = 0;
-
- /* Determine type of EEH reset required for
- * Partitionable Endpoint, a hot-reset (1)
- * or a fundamental reset (3).
- * A fundamental reset required by any device under
- * Partitionable Endpoint trumps hot-reset.
- */
- eeh_pe_dev_traverse(pe, eeh_set_dev_freset, &freset);
-
- if (freset)
- eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
- else
- eeh_ops->reset(pe, EEH_RESET_HOT);
-
- /* The PCI bus requires that the reset be held high for at least
- * a 100 milliseconds. We wait a bit longer 'just in case'.
- */
-#define PCI_BUS_RST_HOLD_TIME_MSEC 250
- msleep(PCI_BUS_RST_HOLD_TIME_MSEC);
-
- /* We might get hit with another EEH freeze as soon as the
- * pci slot reset line is dropped. Make sure we don't miss
- * these, and clear the flag now.
- */
- eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
-
- eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
-
- /* After a PCI slot has been reset, the PCI Express spec requires
- * a 1.5 second idle time for the bus to stabilize, before starting
- * up traffic.
- */
-#define PCI_BUS_SETTLE_TIME_MSEC 1800
- msleep(PCI_BUS_SETTLE_TIME_MSEC);
-}
-
-/**
- * eeh_reset_pe - Reset the indicated PE
- * @pe: EEH PE
- *
- * This routine should be called to reset indicated device, including
- * PE. A PE might include multiple PCI devices and sometimes PCI bridges
- * might be involved as well.
- */
-int eeh_reset_pe(struct eeh_pe *pe)
-{
- int i, rc;
-
- /* Take three shots at resetting the bus */
- for (i=0; i<3; i++) {
- eeh_reset_pe_once(pe);
-
- rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
- if (rc == (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE))
- return 0;
-
- if (rc < 0) {
- pr_err("%s: Unrecoverable slot failure on PHB#%d-PE#%x",
- __func__, pe->phb->global_number, pe->addr);
- return -1;
- }
- pr_err("EEH: bus reset %d failed on PHB#%d-PE#%x, rc=%d\n",
- i+1, pe->phb->global_number, pe->addr, rc);
- }
-
- return -1;
-}
-
-/**
- * eeh_save_bars - Save device bars
- * @edev: PCI device associated EEH device
- *
- * Save the values of the device bars. Unlike the restore
- * routine, this routine is *not* recursive. This is because
- * PCI devices are added individually; but, for the restore,
- * an entire slot is reset at a time.
- */
-void eeh_save_bars(struct eeh_dev *edev)
-{
- int i;
- struct device_node *dn;
-
- if (!edev)
- return;
- dn = eeh_dev_to_of_node(edev);
-
- for (i = 0; i < 16; i++)
- eeh_ops->read_config(dn, i * 4, 4, &edev->config_space[i]);
-}
-
-/**
- * eeh_ops_register - Register platform dependent EEH operations
- * @ops: platform dependent EEH operations
- *
- * Register the platform dependent EEH operation callback
- * functions. The platform should call this function before
- * any other EEH operations.
- */
-int __init eeh_ops_register(struct eeh_ops *ops)
-{
- if (!ops->name) {
- pr_warning("%s: Invalid EEH ops name for %p\n",
- __func__, ops);
- return -EINVAL;
- }
-
- if (eeh_ops && eeh_ops != ops) {
- pr_warning("%s: EEH ops of platform %s already existing (%s)\n",
- __func__, eeh_ops->name, ops->name);
- return -EEXIST;
- }
-
- eeh_ops = ops;
-
- return 0;
-}
-
-/**
- * eeh_ops_unregister - Unreigster platform dependent EEH operations
- * @name: name of EEH platform operations
- *
- * Unregister the platform dependent EEH operation callback
- * functions.
- */
-int __exit eeh_ops_unregister(const char *name)
-{
- if (!name || !strlen(name)) {
- pr_warning("%s: Invalid EEH ops name\n",
- __func__);
- return -EINVAL;
- }
-
- if (eeh_ops && !strcmp(eeh_ops->name, name)) {
- eeh_ops = NULL;
- return 0;
- }
-
- return -EEXIST;
-}
-
-/**
- * eeh_init - EEH initialization
- *
- * Initialize EEH by trying to enable it for all of the adapters in the system.
- * As a side effect we can determine here if eeh is supported at all.
- * Note that we leave EEH on so failed config cycles won't cause a machine
- * check. If a user turns off EEH for a particular adapter they are really
- * telling Linux to ignore errors. Some hardware (e.g. POWER5) won't
- * grant access to a slot if EEH isn't enabled, and so we always enable
- * EEH for all slots/all devices.
- *
- * The eeh-force-off option disables EEH checking globally, for all slots.
- * Even if force-off is set, the EEH hardware is still enabled, so that
- * newer systems can boot.
- */
-static int __init eeh_init(void)
-{
- struct pci_controller *hose, *tmp;
- struct device_node *phb;
- int ret;
-
- /* call platform initialization function */
- if (!eeh_ops) {
- pr_warning("%s: Platform EEH operation not found\n",
- __func__);
- return -EEXIST;
- } else if ((ret = eeh_ops->init())) {
- pr_warning("%s: Failed to call platform init function (%d)\n",
- __func__, ret);
- return ret;
- }
-
- raw_spin_lock_init(&confirm_error_lock);
-
- /* Enable EEH for all adapters */
- if (eeh_probe_mode_devtree()) {
- list_for_each_entry_safe(hose, tmp,
- &hose_list, list_node) {
- phb = hose->dn;
- traverse_pci_devices(phb, eeh_ops->of_probe, NULL);
- }
- }
-
- if (eeh_subsystem_enabled)
- pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n");
- else
- pr_warning("EEH: No capable adapters found\n");
-
- return ret;
-}
-
-core_initcall_sync(eeh_init);
-
-/**
- * eeh_add_device_early - Enable EEH for the indicated device_node
- * @dn: device node for which to set up EEH
- *
- * This routine must be used to perform EEH initialization for PCI
- * devices that were added after system boot (e.g. hotplug, dlpar).
- * This routine must be called before any i/o is performed to the
- * adapter (inluding any config-space i/o).
- * Whether this actually enables EEH or not for this device depends
- * on the CEC architecture, type of the device, on earlier boot
- * command-line arguments & etc.
- */
-static void eeh_add_device_early(struct device_node *dn)
-{
- struct pci_controller *phb;
-
- if (!of_node_to_eeh_dev(dn))
- return;
- phb = of_node_to_eeh_dev(dn)->phb;
-
- /* USB Bus children of PCI devices will not have BUID's */
- if (NULL == phb || 0 == phb->buid)
- return;
-
- /* FIXME: hotplug support on POWERNV */
- eeh_ops->of_probe(dn, NULL);
-}
-
-/**
- * eeh_add_device_tree_early - Enable EEH for the indicated device
- * @dn: device node
- *
- * This routine must be used to perform EEH initialization for the
- * indicated PCI device that was added after system boot (e.g.
- * hotplug, dlpar).
- */
-void eeh_add_device_tree_early(struct device_node *dn)
-{
- struct device_node *sib;
-
- for_each_child_of_node(dn, sib)
- eeh_add_device_tree_early(sib);
- eeh_add_device_early(dn);
-}
-EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
-
-/**
- * eeh_add_device_late - Perform EEH initialization for the indicated pci device
- * @dev: pci device for which to set up EEH
- *
- * This routine must be used to complete EEH initialization for PCI
- * devices that were added after system boot (e.g. hotplug, dlpar).
- */
-static void eeh_add_device_late(struct pci_dev *dev)
-{
- struct device_node *dn;
- struct eeh_dev *edev;
-
- if (!dev || !eeh_subsystem_enabled)
- return;
-
- pr_debug("EEH: Adding device %s\n", pci_name(dev));
-
- dn = pci_device_to_OF_node(dev);
- edev = of_node_to_eeh_dev(dn);
- if (edev->pdev == dev) {
- pr_debug("EEH: Already referenced !\n");
- return;
- }
- WARN_ON(edev->pdev);
-
- pci_dev_get(dev);
- edev->pdev = dev;
- dev->dev.archdata.edev = edev;
-
- eeh_addr_cache_insert_dev(dev);
-}
-
-/**
- * eeh_add_device_tree_late - Perform EEH initialization for the indicated PCI bus
- * @bus: PCI bus
- *
- * This routine must be used to perform EEH initialization for PCI
- * devices which are attached to the indicated PCI bus. The PCI bus
- * is added after system boot through hotplug or dlpar.
- */
-void eeh_add_device_tree_late(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- eeh_add_device_late(dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- struct pci_bus *subbus = dev->subordinate;
- if (subbus)
- eeh_add_device_tree_late(subbus);
- }
- }
-}
-EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
-
-/**
- * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
- * @bus: PCI bus
- *
- * This routine must be used to add EEH sysfs files for PCI
- * devices which are attached to the indicated PCI bus. The PCI bus
- * is added after system boot through hotplug or dlpar.
- */
-void eeh_add_sysfs_files(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- eeh_sysfs_add_device(dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- struct pci_bus *subbus = dev->subordinate;
- if (subbus)
- eeh_add_sysfs_files(subbus);
- }
- }
-}
-EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
-
-/**
- * eeh_remove_device - Undo EEH setup for the indicated pci device
- * @dev: pci device to be removed
- * @purge_pe: remove the PE or not
- *
- * This routine should be called when a device is removed from
- * a running system (e.g. by hotplug or dlpar). It unregisters
- * the PCI device from the EEH subsystem. I/O errors affecting
- * this device will no longer be detected after this call; thus,
- * i/o errors affecting this slot may leave this device unusable.
- */
-static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
-{
- struct eeh_dev *edev;
-
- if (!dev || !eeh_subsystem_enabled)
- return;
- edev = pci_dev_to_eeh_dev(dev);
-
- /* Unregister the device with the EEH/PCI address search system */
- pr_debug("EEH: Removing device %s\n", pci_name(dev));
-
- if (!edev || !edev->pdev) {
- pr_debug("EEH: Not referenced !\n");
- return;
- }
- edev->pdev = NULL;
- dev->dev.archdata.edev = NULL;
- pci_dev_put(dev);
-
- eeh_rmv_from_parent_pe(edev, purge_pe);
- eeh_addr_cache_rmv_dev(dev);
- eeh_sysfs_remove_device(dev);
-}
-
-/**
- * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
- * @dev: PCI device
- * @purge_pe: remove the corresponding PE or not
- *
- * This routine must be called when a device is removed from the
- * running system through hotplug or dlpar. The corresponding
- * PCI address cache will be removed.
- */
-void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe)
-{
- struct pci_bus *bus = dev->subordinate;
- struct pci_dev *child, *tmp;
-
- eeh_remove_device(dev, purge_pe);
-
- if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
- eeh_remove_bus_device(child, purge_pe);
- }
-}
-EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
-
-static int proc_eeh_show(struct seq_file *m, void *v)
-{
- if (0 == eeh_subsystem_enabled) {
- seq_printf(m, "EEH Subsystem is globally disabled\n");
- seq_printf(m, "eeh_total_mmio_ffs=%llu\n", eeh_stats.total_mmio_ffs);
- } else {
- seq_printf(m, "EEH Subsystem is enabled\n");
- seq_printf(m,
- "no device=%llu\n"
- "no device node=%llu\n"
- "no config address=%llu\n"
- "check not wanted=%llu\n"
- "eeh_total_mmio_ffs=%llu\n"
- "eeh_false_positives=%llu\n"
- "eeh_slot_resets=%llu\n",
- eeh_stats.no_device,
- eeh_stats.no_dn,
- eeh_stats.no_cfg_addr,
- eeh_stats.ignored_check,
- eeh_stats.total_mmio_ffs,
- eeh_stats.false_positives,
- eeh_stats.slot_resets);
- }
-
- return 0;
-}
-
-static int proc_eeh_open(struct inode *inode, struct file *file)
-{
- return single_open(file, proc_eeh_show, NULL);
-}
-
-static const struct file_operations proc_eeh_operations = {
- .open = proc_eeh_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init eeh_init_proc(void)
-{
- if (machine_is(pseries))
- proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations);
- return 0;
-}
-__initcall(eeh_init_proc);
+++ /dev/null
-/*
- * PCI address cache; allows the lookup of PCI devices based on I/O address
- *
- * Copyright IBM Corporation 2004
- * Copyright Linas Vepstas <linas@austin.ibm.com> 2004
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/list.h>
-#include <linux/pci.h>
-#include <linux/rbtree.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/atomic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc-pci.h>
-
-
-/**
- * The pci address cache subsystem. This subsystem places
- * PCI device address resources into a red-black tree, sorted
- * according to the address range, so that given only an i/o
- * address, the corresponding PCI device can be **quickly**
- * found. It is safe to perform an address lookup in an interrupt
- * context; this ability is an important feature.
- *
- * Currently, the only customer of this code is the EEH subsystem;
- * thus, this code has been somewhat tailored to suit EEH better.
- * In particular, the cache does *not* hold the addresses of devices
- * for which EEH is not enabled.
- *
- * (Implementation Note: The RB tree seems to be better/faster
- * than any hash algo I could think of for this problem, even
- * with the penalty of slow pointer chases for d-cache misses).
- */
-struct pci_io_addr_range {
- struct rb_node rb_node;
- unsigned long addr_lo;
- unsigned long addr_hi;
- struct eeh_dev *edev;
- struct pci_dev *pcidev;
- unsigned int flags;
-};
-
-static struct pci_io_addr_cache {
- struct rb_root rb_root;
- spinlock_t piar_lock;
-} pci_io_addr_cache_root;
-
-static inline struct eeh_dev *__eeh_addr_cache_get_device(unsigned long addr)
-{
- struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node;
-
- while (n) {
- struct pci_io_addr_range *piar;
- piar = rb_entry(n, struct pci_io_addr_range, rb_node);
-
- if (addr < piar->addr_lo) {
- n = n->rb_left;
- } else {
- if (addr > piar->addr_hi) {
- n = n->rb_right;
- } else {
- pci_dev_get(piar->pcidev);
- return piar->edev;
- }
- }
- }
-
- return NULL;
-}
-
-/**
- * eeh_addr_cache_get_dev - Get device, given only address
- * @addr: mmio (PIO) phys address or i/o port number
- *
- * Given an mmio phys address, or a port number, find a pci device
- * that implements this address. Be sure to pci_dev_put the device
- * when finished. I/O port numbers are assumed to be offset
- * from zero (that is, they do *not* have pci_io_addr added in).
- * It is safe to call this function within an interrupt.
- */
-struct eeh_dev *eeh_addr_cache_get_dev(unsigned long addr)
-{
- struct eeh_dev *edev;
- unsigned long flags;
-
- spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
- edev = __eeh_addr_cache_get_device(addr);
- spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
- return edev;
-}
-
-#ifdef DEBUG
-/*
- * Handy-dandy debug print routine, does nothing more
- * than print out the contents of our addr cache.
- */
-static void eeh_addr_cache_print(struct pci_io_addr_cache *cache)
-{
- struct rb_node *n;
- int cnt = 0;
-
- n = rb_first(&cache->rb_root);
- while (n) {
- struct pci_io_addr_range *piar;
- piar = rb_entry(n, struct pci_io_addr_range, rb_node);
- pr_debug("PCI: %s addr range %d [%lx-%lx]: %s\n",
- (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt,
- piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev));
- cnt++;
- n = rb_next(n);
- }
-}
-#endif
-
-/* Insert address range into the rb tree. */
-static struct pci_io_addr_range *
-eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
- unsigned long ahi, unsigned int flags)
-{
- struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node;
- struct rb_node *parent = NULL;
- struct pci_io_addr_range *piar;
-
- /* Walk tree, find a place to insert into tree */
- while (*p) {
- parent = *p;
- piar = rb_entry(parent, struct pci_io_addr_range, rb_node);
- if (ahi < piar->addr_lo) {
- p = &parent->rb_left;
- } else if (alo > piar->addr_hi) {
- p = &parent->rb_right;
- } else {
- if (dev != piar->pcidev ||
- alo != piar->addr_lo || ahi != piar->addr_hi) {
- pr_warning("PIAR: overlapping address range\n");
- }
- return piar;
- }
- }
- piar = kzalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC);
- if (!piar)
- return NULL;
-
- pci_dev_get(dev);
- piar->addr_lo = alo;
- piar->addr_hi = ahi;
- piar->edev = pci_dev_to_eeh_dev(dev);
- piar->pcidev = dev;
- piar->flags = flags;
-
-#ifdef DEBUG
- pr_debug("PIAR: insert range=[%lx:%lx] dev=%s\n",
- alo, ahi, pci_name(dev));
-#endif
-
- rb_link_node(&piar->rb_node, parent, p);
- rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
-
- return piar;
-}
-
-static void __eeh_addr_cache_insert_dev(struct pci_dev *dev)
-{
- struct device_node *dn;
- struct eeh_dev *edev;
- int i;
-
- dn = pci_device_to_OF_node(dev);
- if (!dn) {
- pr_warning("PCI: no pci dn found for dev=%s\n", pci_name(dev));
- return;
- }
-
- edev = of_node_to_eeh_dev(dn);
- if (!edev) {
- pr_warning("PCI: no EEH dev found for dn=%s\n",
- dn->full_name);
- return;
- }
-
- /* Skip any devices for which EEH is not enabled. */
- if (!edev->pe) {
-#ifdef DEBUG
- pr_info("PCI: skip building address cache for=%s - %s\n",
- pci_name(dev), dn->full_name);
-#endif
- return;
- }
-
- /* Walk resources on this device, poke them into the tree */
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- unsigned long start = pci_resource_start(dev,i);
- unsigned long end = pci_resource_end(dev,i);
- unsigned int flags = pci_resource_flags(dev,i);
-
- /* We are interested only bus addresses, not dma or other stuff */
- if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM)))
- continue;
- if (start == 0 || ~start == 0 || end == 0 || ~end == 0)
- continue;
- eeh_addr_cache_insert(dev, start, end, flags);
- }
-}
-
-/**
- * eeh_addr_cache_insert_dev - Add a device to the address cache
- * @dev: PCI device whose I/O addresses we are interested in.
- *
- * In order to support the fast lookup of devices based on addresses,
- * we maintain a cache of devices that can be quickly searched.
- * This routine adds a device to that cache.
- */
-void eeh_addr_cache_insert_dev(struct pci_dev *dev)
-{
- unsigned long flags;
-
- /* Ignore PCI bridges */
- if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
- return;
-
- spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
- __eeh_addr_cache_insert_dev(dev);
- spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
-}
-
-static inline void __eeh_addr_cache_rmv_dev(struct pci_dev *dev)
-{
- struct rb_node *n;
-
-restart:
- n = rb_first(&pci_io_addr_cache_root.rb_root);
- while (n) {
- struct pci_io_addr_range *piar;
- piar = rb_entry(n, struct pci_io_addr_range, rb_node);
-
- if (piar->pcidev == dev) {
- rb_erase(n, &pci_io_addr_cache_root.rb_root);
- pci_dev_put(piar->pcidev);
- kfree(piar);
- goto restart;
- }
- n = rb_next(n);
- }
-}
-
-/**
- * eeh_addr_cache_rmv_dev - remove pci device from addr cache
- * @dev: device to remove
- *
- * Remove a device from the addr-cache tree.
- * This is potentially expensive, since it will walk
- * the tree multiple times (once per resource).
- * But so what; device removal doesn't need to be that fast.
- */
-void eeh_addr_cache_rmv_dev(struct pci_dev *dev)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
- __eeh_addr_cache_rmv_dev(dev);
- spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
-}
-
-/**
- * eeh_addr_cache_build - Build a cache of I/O addresses
- *
- * Build a cache of pci i/o addresses. This cache will be used to
- * find the pci device that corresponds to a given address.
- * This routine scans all pci busses to build the cache.
- * Must be run late in boot process, after the pci controllers
- * have been scanned for devices (after all device resources are known).
- */
-void __init eeh_addr_cache_build(void)
-{
- struct device_node *dn;
- struct eeh_dev *edev;
- struct pci_dev *dev = NULL;
-
- spin_lock_init(&pci_io_addr_cache_root.piar_lock);
-
- for_each_pci_dev(dev) {
- eeh_addr_cache_insert_dev(dev);
-
- dn = pci_device_to_OF_node(dev);
- if (!dn)
- continue;
-
- edev = of_node_to_eeh_dev(dn);
- if (!edev)
- continue;
-
- pci_dev_get(dev); /* matching put is in eeh_remove_device() */
- dev->dev.archdata.edev = edev;
- edev->pdev = dev;
-
- eeh_sysfs_add_device(dev);
- }
-
-#ifdef DEBUG
- /* Verify tree built up above, echo back the list of addrs. */
- eeh_addr_cache_print(&pci_io_addr_cache_root);
-#endif
-}
-
+++ /dev/null
-/*
- * The file intends to implement dynamic creation of EEH device, which will
- * be bound with OF node and PCI device simutaneously. The EEH devices would
- * be foundamental information for EEH core components to work proerly. Besides,
- * We have to support multiple situations where dynamic creation of EEH device
- * is required:
- *
- * 1) Before PCI emunation starts, we need create EEH devices according to the
- * PCI sensitive OF nodes.
- * 2) When PCI emunation is done, we need do the binding between PCI device and
- * the associated EEH device.
- * 3) DR (Dynamic Reconfiguration) would create PCI sensitive OF node. EEH device
- * will be created while PCI sensitive OF node is detected from DR.
- * 4) PCI hotplug needs redoing the binding between PCI device and EEH device. If
- * PHB is newly inserted, we also need create EEH devices accordingly.
- *
- * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2012.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/export.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-
-#include <asm/pci-bridge.h>
-#include <asm/ppc-pci.h>
-
-/**
- * eeh_dev_init - Create EEH device according to OF node
- * @dn: device node
- * @data: PHB
- *
- * It will create EEH device according to the given OF node. The function
- * might be called by PCI emunation, DR, PHB hotplug.
- */
-void *eeh_dev_init(struct device_node *dn, void *data)
-{
- struct pci_controller *phb = data;
- struct eeh_dev *edev;
-
- /* Allocate EEH device */
- edev = kzalloc(sizeof(*edev), GFP_KERNEL);
- if (!edev) {
- pr_warning("%s: out of memory\n", __func__);
- return NULL;
- }
-
- /* Associate EEH device with OF node */
- PCI_DN(dn)->edev = edev;
- edev->dn = dn;
- edev->phb = phb;
- INIT_LIST_HEAD(&edev->list);
-
- return NULL;
-}
-
-/**
- * eeh_dev_phb_init_dynamic - Create EEH devices for devices included in PHB
- * @phb: PHB
- *
- * Scan the PHB OF node and its child association, then create the
- * EEH devices accordingly
- */
-void eeh_dev_phb_init_dynamic(struct pci_controller *phb)
-{
- struct device_node *dn = phb->dn;
-
- /* EEH PE for PHB */
- eeh_phb_pe_create(phb);
-
- /* EEH device for PHB */
- eeh_dev_init(dn, phb);
-
- /* EEH devices for children OF nodes */
- traverse_pci_devices(dn, eeh_dev_init, phb);
-}
-
-/**
- * eeh_dev_phb_init - Create EEH devices for devices included in existing PHBs
- *
- * Scan all the existing PHBs and create EEH devices for their OF
- * nodes and their children OF nodes
- */
-static int __init eeh_dev_phb_init(void)
-{
- struct pci_controller *phb, *tmp;
-
- list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
- eeh_dev_phb_init_dynamic(phb);
-
- pr_info("EEH: devices created\n");
-
- return 0;
-}
-
-core_initcall(eeh_dev_phb_init);
+++ /dev/null
-/*
- * PCI Error Recovery Driver for RPA-compliant PPC64 platform.
- * Copyright IBM Corp. 2004 2005
- * Copyright Linas Vepstas <linas@linas.org> 2004, 2005
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send comments and feedback to Linas Vepstas <linas@austin.ibm.com>
- */
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <asm/eeh.h>
-#include <asm/eeh_event.h>
-#include <asm/ppc-pci.h>
-#include <asm/pci-bridge.h>
-#include <asm/prom.h>
-#include <asm/rtas.h>
-
-/**
- * eeh_pcid_name - Retrieve name of PCI device driver
- * @pdev: PCI device
- *
- * This routine is used to retrieve the name of PCI device driver
- * if that's valid.
- */
-static inline const char *eeh_pcid_name(struct pci_dev *pdev)
-{
- if (pdev && pdev->dev.driver)
- return pdev->dev.driver->name;
- return "";
-}
-
-/**
- * eeh_pcid_get - Get the PCI device driver
- * @pdev: PCI device
- *
- * The function is used to retrieve the PCI device driver for
- * the indicated PCI device. Besides, we will increase the reference
- * of the PCI device driver to prevent that being unloaded on
- * the fly. Otherwise, kernel crash would be seen.
- */
-static inline struct pci_driver *eeh_pcid_get(struct pci_dev *pdev)
-{
- if (!pdev || !pdev->driver)
- return NULL;
-
- if (!try_module_get(pdev->driver->driver.owner))
- return NULL;
-
- return pdev->driver;
-}
-
-/**
- * eeh_pcid_put - Dereference on the PCI device driver
- * @pdev: PCI device
- *
- * The function is called to do dereference on the PCI device
- * driver of the indicated PCI device.
- */
-static inline void eeh_pcid_put(struct pci_dev *pdev)
-{
- if (!pdev || !pdev->driver)
- return;
-
- module_put(pdev->driver->driver.owner);
-}
-
-#if 0
-static void print_device_node_tree(struct pci_dn *pdn, int dent)
-{
- int i;
- struct device_node *pc;
-
- if (!pdn)
- return;
- for (i = 0; i < dent; i++)
- printk(" ");
- printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n",
- pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr,
- pdn->eeh_pe_config_addr, pdn->node->full_name);
- dent += 3;
- pc = pdn->node->child;
- while (pc) {
- print_device_node_tree(PCI_DN(pc), dent);
- pc = pc->sibling;
- }
-}
-#endif
-
-/**
- * eeh_disable_irq - Disable interrupt for the recovering device
- * @dev: PCI device
- *
- * This routine must be called when reporting temporary or permanent
- * error to the particular PCI device to disable interrupt of that
- * device. If the device has enabled MSI or MSI-X interrupt, we needn't
- * do real work because EEH should freeze DMA transfers for those PCI
- * devices encountering EEH errors, which includes MSI or MSI-X.
- */
-static void eeh_disable_irq(struct pci_dev *dev)
-{
- struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
-
- /* Don't disable MSI and MSI-X interrupts. They are
- * effectively disabled by the DMA Stopped state
- * when an EEH error occurs.
- */
- if (dev->msi_enabled || dev->msix_enabled)
- return;
-
- if (!irq_has_action(dev->irq))
- return;
-
- edev->mode |= EEH_DEV_IRQ_DISABLED;
- disable_irq_nosync(dev->irq);
-}
-
-/**
- * eeh_enable_irq - Enable interrupt for the recovering device
- * @dev: PCI device
- *
- * This routine must be called to enable interrupt while failed
- * device could be resumed.
- */
-static void eeh_enable_irq(struct pci_dev *dev)
-{
- struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
-
- if ((edev->mode) & EEH_DEV_IRQ_DISABLED) {
- edev->mode &= ~EEH_DEV_IRQ_DISABLED;
- enable_irq(dev->irq);
- }
-}
-
-/**
- * eeh_report_error - Report pci error to each device driver
- * @data: eeh device
- * @userdata: return value
- *
- * Report an EEH error to each device driver, collect up and
- * merge the device driver responses. Cumulative response
- * passed back in "userdata".
- */
-static void *eeh_report_error(void *data, void *userdata)
-{
- struct eeh_dev *edev = (struct eeh_dev *)data;
- struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
- enum pci_ers_result rc, *res = userdata;
- struct pci_driver *driver;
-
- /* We might not have the associated PCI device,
- * then we should continue for next one.
- */
- if (!dev) return NULL;
- dev->error_state = pci_channel_io_frozen;
-
- driver = eeh_pcid_get(dev);
- if (!driver) return NULL;
-
- eeh_disable_irq(dev);
-
- if (!driver->err_handler ||
- !driver->err_handler->error_detected) {
- eeh_pcid_put(dev);
- return NULL;
- }
-
- rc = driver->err_handler->error_detected(dev, pci_channel_io_frozen);
-
- /* A driver that needs a reset trumps all others */
- if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
- if (*res == PCI_ERS_RESULT_NONE) *res = rc;
-
- eeh_pcid_put(dev);
- return NULL;
-}
-
-/**
- * eeh_report_mmio_enabled - Tell drivers that MMIO has been enabled
- * @data: eeh device
- * @userdata: return value
- *
- * Tells each device driver that IO ports, MMIO and config space I/O
- * are now enabled. Collects up and merges the device driver responses.
- * Cumulative response passed back in "userdata".
- */
-static void *eeh_report_mmio_enabled(void *data, void *userdata)
-{
- struct eeh_dev *edev = (struct eeh_dev *)data;
- struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
- enum pci_ers_result rc, *res = userdata;
- struct pci_driver *driver;
-
- driver = eeh_pcid_get(dev);
- if (!driver) return NULL;
-
- if (!driver->err_handler ||
- !driver->err_handler->mmio_enabled) {
- eeh_pcid_put(dev);
- return NULL;
- }
-
- rc = driver->err_handler->mmio_enabled(dev);
-
- /* A driver that needs a reset trumps all others */
- if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
- if (*res == PCI_ERS_RESULT_NONE) *res = rc;
-
- eeh_pcid_put(dev);
- return NULL;
-}
-
-/**
- * eeh_report_reset - Tell device that slot has been reset
- * @data: eeh device
- * @userdata: return value
- *
- * This routine must be called while EEH tries to reset particular
- * PCI device so that the associated PCI device driver could take
- * some actions, usually to save data the driver needs so that the
- * driver can work again while the device is recovered.
- */
-static void *eeh_report_reset(void *data, void *userdata)
-{
- struct eeh_dev *edev = (struct eeh_dev *)data;
- struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
- enum pci_ers_result rc, *res = userdata;
- struct pci_driver *driver;
-
- if (!dev) return NULL;
- dev->error_state = pci_channel_io_normal;
-
- driver = eeh_pcid_get(dev);
- if (!driver) return NULL;
-
- eeh_enable_irq(dev);
-
- if (!driver->err_handler ||
- !driver->err_handler->slot_reset) {
- eeh_pcid_put(dev);
- return NULL;
- }
-
- rc = driver->err_handler->slot_reset(dev);
- if ((*res == PCI_ERS_RESULT_NONE) ||
- (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
- if (*res == PCI_ERS_RESULT_DISCONNECT &&
- rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
-
- eeh_pcid_put(dev);
- return NULL;
-}
-
-/**
- * eeh_report_resume - Tell device to resume normal operations
- * @data: eeh device
- * @userdata: return value
- *
- * This routine must be called to notify the device driver that it
- * could resume so that the device driver can do some initialization
- * to make the recovered device work again.
- */
-static void *eeh_report_resume(void *data, void *userdata)
-{
- struct eeh_dev *edev = (struct eeh_dev *)data;
- struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
- struct pci_driver *driver;
-
- if (!dev) return NULL;
- dev->error_state = pci_channel_io_normal;
-
- driver = eeh_pcid_get(dev);
- if (!driver) return NULL;
-
- eeh_enable_irq(dev);
-
- if (!driver->err_handler ||
- !driver->err_handler->resume) {
- eeh_pcid_put(dev);
- return NULL;
- }
-
- driver->err_handler->resume(dev);
-
- eeh_pcid_put(dev);
- return NULL;
-}
-
-/**
- * eeh_report_failure - Tell device driver that device is dead.
- * @data: eeh device
- * @userdata: return value
- *
- * This informs the device driver that the device is permanently
- * dead, and that no further recovery attempts will be made on it.
- */
-static void *eeh_report_failure(void *data, void *userdata)
-{
- struct eeh_dev *edev = (struct eeh_dev *)data;
- struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
- struct pci_driver *driver;
-
- if (!dev) return NULL;
- dev->error_state = pci_channel_io_perm_failure;
-
- driver = eeh_pcid_get(dev);
- if (!driver) return NULL;
-
- eeh_disable_irq(dev);
-
- if (!driver->err_handler ||
- !driver->err_handler->error_detected) {
- eeh_pcid_put(dev);
- return NULL;
- }
-
- driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
-
- eeh_pcid_put(dev);
- return NULL;
-}
-
-/**
- * eeh_reset_device - Perform actual reset of a pci slot
- * @pe: EEH PE
- * @bus: PCI bus corresponding to the isolcated slot
- *
- * This routine must be called to do reset on the indicated PE.
- * During the reset, udev might be invoked because those affected
- * PCI devices will be removed and then added.
- */
-static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
-{
- int cnt, rc;
-
- /* pcibios will clear the counter; save the value */
- cnt = pe->freeze_count;
-
- /*
- * We don't remove the corresponding PE instances because
- * we need the information afterwords. The attached EEH
- * devices are expected to be attached soon when calling
- * into pcibios_add_pci_devices().
- */
- if (bus)
- __pcibios_remove_pci_devices(bus, 0);
-
- /* Reset the pci controller. (Asserts RST#; resets config space).
- * Reconfigure bridges and devices. Don't try to bring the system
- * up if the reset failed for some reason.
- */
- rc = eeh_reset_pe(pe);
- if (rc)
- return rc;
-
- /* Restore PE */
- eeh_ops->configure_bridge(pe);
- eeh_pe_restore_bars(pe);
-
- /* Give the system 5 seconds to finish running the user-space
- * hotplug shutdown scripts, e.g. ifdown for ethernet. Yes,
- * this is a hack, but if we don't do this, and try to bring
- * the device up before the scripts have taken it down,
- * potentially weird things happen.
- */
- if (bus) {
- ssleep(5);
- pcibios_add_pci_devices(bus);
- }
- pe->freeze_count = cnt;
-
- return 0;
-}
-
-/* The longest amount of time to wait for a pci device
- * to come back on line, in seconds.
- */
-#define MAX_WAIT_FOR_RECOVERY 150
-
-/**
- * eeh_handle_event - Reset a PCI device after hard lockup.
- * @pe: EEH PE
- *
- * While PHB detects address or data parity errors on particular PCI
- * slot, the associated PE will be frozen. Besides, DMA's occurring
- * to wild addresses (which usually happen due to bugs in device
- * drivers or in PCI adapter firmware) can cause EEH error. #SERR,
- * #PERR or other misc PCI-related errors also can trigger EEH errors.
- *
- * Recovery process consists of unplugging the device driver (which
- * generated hotplug events to userspace), then issuing a PCI #RST to
- * the device, then reconfiguring the PCI config space for all bridges
- * & devices under this slot, and then finally restarting the device
- * drivers (which cause a second set of hotplug events to go out to
- * userspace).
- */
-void eeh_handle_event(struct eeh_pe *pe)
-{
- struct pci_bus *frozen_bus;
- int rc = 0;
- enum pci_ers_result result = PCI_ERS_RESULT_NONE;
-
- frozen_bus = eeh_pe_bus_get(pe);
- if (!frozen_bus) {
- pr_err("%s: Cannot find PCI bus for PHB#%d-PE#%x\n",
- __func__, pe->phb->global_number, pe->addr);
- return;
- }
-
- pe->freeze_count++;
- if (pe->freeze_count > EEH_MAX_ALLOWED_FREEZES)
- goto excess_failures;
- pr_warning("EEH: This PCI device has failed %d times in the last hour\n",
- pe->freeze_count);
-
- /* Walk the various device drivers attached to this slot through
- * a reset sequence, giving each an opportunity to do what it needs
- * to accomplish the reset. Each child gets a report of the
- * status ... if any child can't handle the reset, then the entire
- * slot is dlpar removed and added.
- */
- eeh_pe_dev_traverse(pe, eeh_report_error, &result);
-
- /* Get the current PCI slot state. This can take a long time,
- * sometimes over 3 seconds for certain systems.
- */
- rc = eeh_ops->wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000);
- if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) {
- printk(KERN_WARNING "EEH: Permanent failure\n");
- goto hard_fail;
- }
-
- /* Since rtas may enable MMIO when posting the error log,
- * don't post the error log until after all dev drivers
- * have been informed.
- */
- eeh_slot_error_detail(pe, EEH_LOG_TEMP);
-
- /* If all device drivers were EEH-unaware, then shut
- * down all of the device drivers, and hope they
- * go down willingly, without panicing the system.
- */
- if (result == PCI_ERS_RESULT_NONE) {
- rc = eeh_reset_device(pe, frozen_bus);
- if (rc) {
- printk(KERN_WARNING "EEH: Unable to reset, rc=%d\n", rc);
- goto hard_fail;
- }
- }
-
- /* If all devices reported they can proceed, then re-enable MMIO */
- if (result == PCI_ERS_RESULT_CAN_RECOVER) {
- rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
-
- if (rc < 0)
- goto hard_fail;
- if (rc) {
- result = PCI_ERS_RESULT_NEED_RESET;
- } else {
- result = PCI_ERS_RESULT_NONE;
- eeh_pe_dev_traverse(pe, eeh_report_mmio_enabled, &result);
- }
- }
-
- /* If all devices reported they can proceed, then re-enable DMA */
- if (result == PCI_ERS_RESULT_CAN_RECOVER) {
- rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA);
-
- if (rc < 0)
- goto hard_fail;
- if (rc)
- result = PCI_ERS_RESULT_NEED_RESET;
- else
- result = PCI_ERS_RESULT_RECOVERED;
- }
-
- /* If any device has a hard failure, then shut off everything. */
- if (result == PCI_ERS_RESULT_DISCONNECT) {
- printk(KERN_WARNING "EEH: Device driver gave up\n");
- goto hard_fail;
- }
-
- /* If any device called out for a reset, then reset the slot */
- if (result == PCI_ERS_RESULT_NEED_RESET) {
- rc = eeh_reset_device(pe, NULL);
- if (rc) {
- printk(KERN_WARNING "EEH: Cannot reset, rc=%d\n", rc);
- goto hard_fail;
- }
- result = PCI_ERS_RESULT_NONE;
- eeh_pe_dev_traverse(pe, eeh_report_reset, &result);
- }
-
- /* All devices should claim they have recovered by now. */
- if ((result != PCI_ERS_RESULT_RECOVERED) &&
- (result != PCI_ERS_RESULT_NONE)) {
- printk(KERN_WARNING "EEH: Not recovered\n");
- goto hard_fail;
- }
-
- /* Tell all device drivers that they can resume operations */
- eeh_pe_dev_traverse(pe, eeh_report_resume, NULL);
-
- return;
-
-excess_failures:
- /*
- * About 90% of all real-life EEH failures in the field
- * are due to poorly seated PCI cards. Only 10% or so are
- * due to actual, failed cards.
- */
- pr_err("EEH: PHB#%d-PE#%x has failed %d times in the\n"
- "last hour and has been permanently disabled.\n"
- "Please try reseating or replacing it.\n",
- pe->phb->global_number, pe->addr,
- pe->freeze_count);
- goto perm_error;
-
-hard_fail:
- pr_err("EEH: Unable to recover from failure from PHB#%d-PE#%x.\n"
- "Please try reseating or replacing it\n",
- pe->phb->global_number, pe->addr);
-
-perm_error:
- eeh_slot_error_detail(pe, EEH_LOG_PERM);
-
- /* Notify all devices that they're about to go down. */
- eeh_pe_dev_traverse(pe, eeh_report_failure, NULL);
-
- /* Shut down the device drivers for good. */
- if (frozen_bus)
- pcibios_remove_pci_devices(frozen_bus);
-}
-
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (c) 2005 Linas Vepstas <linas@linas.org>
- */
-
-#include <linux/delay.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/kthread.h>
-#include <asm/eeh_event.h>
-#include <asm/ppc-pci.h>
-
-/** Overview:
- * EEH error states may be detected within exception handlers;
- * however, the recovery processing needs to occur asynchronously
- * in a normal kernel context and not an interrupt context.
- * This pair of routines creates an event and queues it onto a
- * work-queue, where a worker thread can drive recovery.
- */
-
-/* EEH event workqueue setup. */
-static DEFINE_SPINLOCK(eeh_eventlist_lock);
-LIST_HEAD(eeh_eventlist);
-static void eeh_thread_launcher(struct work_struct *);
-DECLARE_WORK(eeh_event_wq, eeh_thread_launcher);
-
-/* Serialize reset sequences for a given pci device */
-DEFINE_MUTEX(eeh_event_mutex);
-
-/**
- * eeh_event_handler - Dispatch EEH events.
- * @dummy - unused
- *
- * The detection of a frozen slot can occur inside an interrupt,
- * where it can be hard to do anything about it. The goal of this
- * routine is to pull these detection events out of the context
- * of the interrupt handler, and re-dispatch them for processing
- * at a later time in a normal context.
- */
-static int eeh_event_handler(void * dummy)
-{
- unsigned long flags;
- struct eeh_event *event;
- struct eeh_pe *pe;
-
- spin_lock_irqsave(&eeh_eventlist_lock, flags);
- event = NULL;
-
- /* Unqueue the event, get ready to process. */
- if (!list_empty(&eeh_eventlist)) {
- event = list_entry(eeh_eventlist.next, struct eeh_event, list);
- list_del(&event->list);
- }
- spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
-
- if (event == NULL)
- return 0;
-
- /* Serialize processing of EEH events */
- mutex_lock(&eeh_event_mutex);
- pe = event->pe;
- eeh_pe_state_mark(pe, EEH_PE_RECOVERING);
- pr_info("EEH: Detected PCI bus error on PHB#%d-PE#%x\n",
- pe->phb->global_number, pe->addr);
-
- set_current_state(TASK_INTERRUPTIBLE); /* Don't add to load average */
- eeh_handle_event(pe);
- eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
-
- kfree(event);
- mutex_unlock(&eeh_event_mutex);
-
- /* If there are no new errors after an hour, clear the counter. */
- if (pe && pe->freeze_count > 0) {
- msleep_interruptible(3600*1000);
- if (pe->freeze_count > 0)
- pe->freeze_count--;
-
- }
-
- return 0;
-}
-
-/**
- * eeh_thread_launcher - Start kernel thread to handle EEH events
- * @dummy - unused
- *
- * This routine is called to start the kernel thread for processing
- * EEH event.
- */
-static void eeh_thread_launcher(struct work_struct *dummy)
-{
- if (IS_ERR(kthread_run(eeh_event_handler, NULL, "eehd")))
- printk(KERN_ERR "Failed to start EEH daemon\n");
-}
-
-/**
- * eeh_send_failure_event - Generate a PCI error event
- * @pe: EEH PE
- *
- * This routine can be called within an interrupt context;
- * the actual event will be delivered in a normal context
- * (from a workqueue).
- */
-int eeh_send_failure_event(struct eeh_pe *pe)
-{
- unsigned long flags;
- struct eeh_event *event;
-
- event = kzalloc(sizeof(*event), GFP_ATOMIC);
- if (!event) {
- pr_err("EEH: out of memory, event not handled\n");
- return -ENOMEM;
- }
- event->pe = pe;
-
- /* We may or may not be called in an interrupt context */
- spin_lock_irqsave(&eeh_eventlist_lock, flags);
- list_add(&event->list, &eeh_eventlist);
- spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
-
- schedule_work(&eeh_event_wq);
-
- return 0;
-}
+++ /dev/null
-/*
- * The file intends to implement PE based on the information from
- * platforms. Basically, there have 3 types of PEs: PHB/Bus/Device.
- * All the PEs should be organized as hierarchy tree. The first level
- * of the tree will be associated to existing PHBs since the particular
- * PE is only meaningful in one PHB domain.
- *
- * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2012.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/export.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-
-#include <asm/pci-bridge.h>
-#include <asm/ppc-pci.h>
-
-static LIST_HEAD(eeh_phb_pe);
-
-/**
- * eeh_pe_alloc - Allocate PE
- * @phb: PCI controller
- * @type: PE type
- *
- * Allocate PE instance dynamically.
- */
-static struct eeh_pe *eeh_pe_alloc(struct pci_controller *phb, int type)
-{
- struct eeh_pe *pe;
-
- /* Allocate PHB PE */
- pe = kzalloc(sizeof(struct eeh_pe), GFP_KERNEL);
- if (!pe) return NULL;
-
- /* Initialize PHB PE */
- pe->type = type;
- pe->phb = phb;
- INIT_LIST_HEAD(&pe->child_list);
- INIT_LIST_HEAD(&pe->child);
- INIT_LIST_HEAD(&pe->edevs);
-
- return pe;
-}
-
-/**
- * eeh_phb_pe_create - Create PHB PE
- * @phb: PCI controller
- *
- * The function should be called while the PHB is detected during
- * system boot or PCI hotplug in order to create PHB PE.
- */
-int eeh_phb_pe_create(struct pci_controller *phb)
-{
- struct eeh_pe *pe;
-
- /* Allocate PHB PE */
- pe = eeh_pe_alloc(phb, EEH_PE_PHB);
- if (!pe) {
- pr_err("%s: out of memory!\n", __func__);
- return -ENOMEM;
- }
-
- /* Put it into the list */
- eeh_lock();
- list_add_tail(&pe->child, &eeh_phb_pe);
- eeh_unlock();
-
- pr_debug("EEH: Add PE for PHB#%d\n", phb->global_number);
-
- return 0;
-}
-
-/**
- * eeh_phb_pe_get - Retrieve PHB PE based on the given PHB
- * @phb: PCI controller
- *
- * The overall PEs form hierarchy tree. The first layer of the
- * hierarchy tree is composed of PHB PEs. The function is used
- * to retrieve the corresponding PHB PE according to the given PHB.
- */
-static struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb)
-{
- struct eeh_pe *pe;
-
- list_for_each_entry(pe, &eeh_phb_pe, child) {
- /*
- * Actually, we needn't check the type since
- * the PE for PHB has been determined when that
- * was created.
- */
- if ((pe->type & EEH_PE_PHB) && pe->phb == phb)
- return pe;
- }
-
- return NULL;
-}
-
-/**
- * eeh_pe_next - Retrieve the next PE in the tree
- * @pe: current PE
- * @root: root PE
- *
- * The function is used to retrieve the next PE in the
- * hierarchy PE tree.
- */
-static struct eeh_pe *eeh_pe_next(struct eeh_pe *pe,
- struct eeh_pe *root)
-{
- struct list_head *next = pe->child_list.next;
-
- if (next == &pe->child_list) {
- while (1) {
- if (pe == root)
- return NULL;
- next = pe->child.next;
- if (next != &pe->parent->child_list)
- break;
- pe = pe->parent;
- }
- }
-
- return list_entry(next, struct eeh_pe, child);
-}
-
-/**
- * eeh_pe_traverse - Traverse PEs in the specified PHB
- * @root: root PE
- * @fn: callback
- * @flag: extra parameter to callback
- *
- * The function is used to traverse the specified PE and its
- * child PEs. The traversing is to be terminated once the
- * callback returns something other than NULL, or no more PEs
- * to be traversed.
- */
-static void *eeh_pe_traverse(struct eeh_pe *root,
- eeh_traverse_func fn, void *flag)
-{
- struct eeh_pe *pe;
- void *ret;
-
- for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
- ret = fn(pe, flag);
- if (ret) return ret;
- }
-
- return NULL;
-}
-
-/**
- * eeh_pe_dev_traverse - Traverse the devices from the PE
- * @root: EEH PE
- * @fn: function callback
- * @flag: extra parameter to callback
- *
- * The function is used to traverse the devices of the specified
- * PE and its child PEs.
- */
-void *eeh_pe_dev_traverse(struct eeh_pe *root,
- eeh_traverse_func fn, void *flag)
-{
- struct eeh_pe *pe;
- struct eeh_dev *edev;
- void *ret;
-
- if (!root) {
- pr_warning("%s: Invalid PE %p\n", __func__, root);
- return NULL;
- }
-
- eeh_lock();
-
- /* Traverse root PE */
- for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
- eeh_pe_for_each_dev(pe, edev) {
- ret = fn(edev, flag);
- if (ret) {
- eeh_unlock();
- return ret;
- }
- }
- }
-
- eeh_unlock();
-
- return NULL;
-}
-
-/**
- * __eeh_pe_get - Check the PE address
- * @data: EEH PE
- * @flag: EEH device
- *
- * For one particular PE, it can be identified by PE address
- * or tranditional BDF address. BDF address is composed of
- * Bus/Device/Function number. The extra data referred by flag
- * indicates which type of address should be used.
- */
-static void *__eeh_pe_get(void *data, void *flag)
-{
- struct eeh_pe *pe = (struct eeh_pe *)data;
- struct eeh_dev *edev = (struct eeh_dev *)flag;
-
- /* Unexpected PHB PE */
- if (pe->type & EEH_PE_PHB)
- return NULL;
-
- /* We prefer PE address */
- if (edev->pe_config_addr &&
- (edev->pe_config_addr == pe->addr))
- return pe;
-
- /* Try BDF address */
- if (edev->pe_config_addr &&
- (edev->config_addr == pe->config_addr))
- return pe;
-
- return NULL;
-}
-
-/**
- * eeh_pe_get - Search PE based on the given address
- * @edev: EEH device
- *
- * Search the corresponding PE based on the specified address which
- * is included in the eeh device. The function is used to check if
- * the associated PE has been created against the PE address. It's
- * notable that the PE address has 2 format: traditional PE address
- * which is composed of PCI bus/device/function number, or unified
- * PE address.
- */
-static struct eeh_pe *eeh_pe_get(struct eeh_dev *edev)
-{
- struct eeh_pe *root = eeh_phb_pe_get(edev->phb);
- struct eeh_pe *pe;
-
- pe = eeh_pe_traverse(root, __eeh_pe_get, edev);
-
- return pe;
-}
-
-/**
- * eeh_pe_get_parent - Retrieve the parent PE
- * @edev: EEH device
- *
- * The whole PEs existing in the system are organized as hierarchy
- * tree. The function is used to retrieve the parent PE according
- * to the parent EEH device.
- */
-static struct eeh_pe *eeh_pe_get_parent(struct eeh_dev *edev)
-{
- struct device_node *dn;
- struct eeh_dev *parent;
-
- /*
- * It might have the case for the indirect parent
- * EEH device already having associated PE, but
- * the direct parent EEH device doesn't have yet.
- */
- dn = edev->dn->parent;
- while (dn) {
- /* We're poking out of PCI territory */
- if (!PCI_DN(dn)) return NULL;
-
- parent = of_node_to_eeh_dev(dn);
- /* We're poking out of PCI territory */
- if (!parent) return NULL;
-
- if (parent->pe)
- return parent->pe;
-
- dn = dn->parent;
- }
-
- return NULL;
-}
-
-/**
- * eeh_add_to_parent_pe - Add EEH device to parent PE
- * @edev: EEH device
- *
- * Add EEH device to the parent PE. If the parent PE already
- * exists, the PE type will be changed to EEH_PE_BUS. Otherwise,
- * we have to create new PE to hold the EEH device and the new
- * PE will be linked to its parent PE as well.
- */
-int eeh_add_to_parent_pe(struct eeh_dev *edev)
-{
- struct eeh_pe *pe, *parent;
-
- eeh_lock();
-
- /*
- * Search the PE has been existing or not according
- * to the PE address. If that has been existing, the
- * PE should be composed of PCI bus and its subordinate
- * components.
- */
- pe = eeh_pe_get(edev);
- if (pe && !(pe->type & EEH_PE_INVALID)) {
- if (!edev->pe_config_addr) {
- eeh_unlock();
- pr_err("%s: PE with addr 0x%x already exists\n",
- __func__, edev->config_addr);
- return -EEXIST;
- }
-
- /* Mark the PE as type of PCI bus */
- pe->type = EEH_PE_BUS;
- edev->pe = pe;
-
- /* Put the edev to PE */
- list_add_tail(&edev->list, &pe->edevs);
- eeh_unlock();
- pr_debug("EEH: Add %s to Bus PE#%x\n",
- edev->dn->full_name, pe->addr);
-
- return 0;
- } else if (pe && (pe->type & EEH_PE_INVALID)) {
- list_add_tail(&edev->list, &pe->edevs);
- edev->pe = pe;
- /*
- * We're running to here because of PCI hotplug caused by
- * EEH recovery. We need clear EEH_PE_INVALID until the top.
- */
- parent = pe;
- while (parent) {
- if (!(parent->type & EEH_PE_INVALID))
- break;
- parent->type &= ~EEH_PE_INVALID;
- parent = parent->parent;
- }
- eeh_unlock();
- pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
- edev->dn->full_name, pe->addr, pe->parent->addr);
-
- return 0;
- }
-
- /* Create a new EEH PE */
- pe = eeh_pe_alloc(edev->phb, EEH_PE_DEVICE);
- if (!pe) {
- eeh_unlock();
- pr_err("%s: out of memory!\n", __func__);
- return -ENOMEM;
- }
- pe->addr = edev->pe_config_addr;
- pe->config_addr = edev->config_addr;
-
- /*
- * Put the new EEH PE into hierarchy tree. If the parent
- * can't be found, the newly created PE will be attached
- * to PHB directly. Otherwise, we have to associate the
- * PE with its parent.
- */
- parent = eeh_pe_get_parent(edev);
- if (!parent) {
- parent = eeh_phb_pe_get(edev->phb);
- if (!parent) {
- eeh_unlock();
- pr_err("%s: No PHB PE is found (PHB Domain=%d)\n",
- __func__, edev->phb->global_number);
- edev->pe = NULL;
- kfree(pe);
- return -EEXIST;
- }
- }
- pe->parent = parent;
-
- /*
- * Put the newly created PE into the child list and
- * link the EEH device accordingly.
- */
- list_add_tail(&pe->child, &parent->child_list);
- list_add_tail(&edev->list, &pe->edevs);
- edev->pe = pe;
- eeh_unlock();
- pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
- edev->dn->full_name, pe->addr, pe->parent->addr);
-
- return 0;
-}
-
-/**
- * eeh_rmv_from_parent_pe - Remove one EEH device from the associated PE
- * @edev: EEH device
- * @purge_pe: remove PE or not
- *
- * The PE hierarchy tree might be changed when doing PCI hotplug.
- * Also, the PCI devices or buses could be removed from the system
- * during EEH recovery. So we have to call the function remove the
- * corresponding PE accordingly if necessary.
- */
-int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
-{
- struct eeh_pe *pe, *parent, *child;
- int cnt;
-
- if (!edev->pe) {
- pr_warning("%s: No PE found for EEH device %s\n",
- __func__, edev->dn->full_name);
- return -EEXIST;
- }
-
- eeh_lock();
-
- /* Remove the EEH device */
- pe = edev->pe;
- edev->pe = NULL;
- list_del(&edev->list);
-
- /*
- * Check if the parent PE includes any EEH devices.
- * If not, we should delete that. Also, we should
- * delete the parent PE if it doesn't have associated
- * child PEs and EEH devices.
- */
- while (1) {
- parent = pe->parent;
- if (pe->type & EEH_PE_PHB)
- break;
-
- if (purge_pe) {
- if (list_empty(&pe->edevs) &&
- list_empty(&pe->child_list)) {
- list_del(&pe->child);
- kfree(pe);
- } else {
- break;
- }
- } else {
- if (list_empty(&pe->edevs)) {
- cnt = 0;
- list_for_each_entry(child, &pe->child_list, child) {
- if (!(child->type & EEH_PE_INVALID)) {
- cnt++;
- break;
- }
- }
-
- if (!cnt)
- pe->type |= EEH_PE_INVALID;
- else
- break;
- }
- }
-
- pe = parent;
- }
-
- eeh_unlock();
-
- return 0;
-}
-
-/**
- * __eeh_pe_state_mark - Mark the state for the PE
- * @data: EEH PE
- * @flag: state
- *
- * The function is used to mark the indicated state for the given
- * PE. Also, the associated PCI devices will be put into IO frozen
- * state as well.
- */
-static void *__eeh_pe_state_mark(void *data, void *flag)
-{
- struct eeh_pe *pe = (struct eeh_pe *)data;
- int state = *((int *)flag);
- struct eeh_dev *tmp;
- struct pci_dev *pdev;
-
- /*
- * Mark the PE with the indicated state. Also,
- * the associated PCI device will be put into
- * I/O frozen state to avoid I/O accesses from
- * the PCI device driver.
- */
- pe->state |= state;
- eeh_pe_for_each_dev(pe, tmp) {
- pdev = eeh_dev_to_pci_dev(tmp);
- if (pdev)
- pdev->error_state = pci_channel_io_frozen;
- }
-
- return NULL;
-}
-
-/**
- * eeh_pe_state_mark - Mark specified state for PE and its associated device
- * @pe: EEH PE
- *
- * EEH error affects the current PE and its child PEs. The function
- * is used to mark appropriate state for the affected PEs and the
- * associated devices.
- */
-void eeh_pe_state_mark(struct eeh_pe *pe, int state)
-{
- eeh_lock();
- eeh_pe_traverse(pe, __eeh_pe_state_mark, &state);
- eeh_unlock();
-}
-
-/**
- * __eeh_pe_state_clear - Clear state for the PE
- * @data: EEH PE
- * @flag: state
- *
- * The function is used to clear the indicated state from the
- * given PE. Besides, we also clear the check count of the PE
- * as well.
- */
-static void *__eeh_pe_state_clear(void *data, void *flag)
-{
- struct eeh_pe *pe = (struct eeh_pe *)data;
- int state = *((int *)flag);
-
- pe->state &= ~state;
- pe->check_count = 0;
-
- return NULL;
-}
-
-/**
- * eeh_pe_state_clear - Clear state for the PE and its children
- * @pe: PE
- * @state: state to be cleared
- *
- * When the PE and its children has been recovered from error,
- * we need clear the error state for that. The function is used
- * for the purpose.
- */
-void eeh_pe_state_clear(struct eeh_pe *pe, int state)
-{
- eeh_lock();
- eeh_pe_traverse(pe, __eeh_pe_state_clear, &state);
- eeh_unlock();
-}
-
-/**
- * eeh_restore_one_device_bars - Restore the Base Address Registers for one device
- * @data: EEH device
- * @flag: Unused
- *
- * Loads the PCI configuration space base address registers,
- * the expansion ROM base address, the latency timer, and etc.
- * from the saved values in the device node.
- */
-static void *eeh_restore_one_device_bars(void *data, void *flag)
-{
- int i;
- u32 cmd;
- struct eeh_dev *edev = (struct eeh_dev *)data;
- struct device_node *dn = eeh_dev_to_of_node(edev);
-
- for (i = 4; i < 10; i++)
- eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]);
- /* 12 == Expansion ROM Address */
- eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]);
-
-#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
-#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
-
- eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1,
- SAVED_BYTE(PCI_CACHE_LINE_SIZE));
- eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1,
- SAVED_BYTE(PCI_LATENCY_TIMER));
-
- /* max latency, min grant, interrupt pin and line */
- eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]);
-
- /*
- * Restore PERR & SERR bits, some devices require it,
- * don't touch the other command bits
- */
- eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd);
- if (edev->config_space[1] & PCI_COMMAND_PARITY)
- cmd |= PCI_COMMAND_PARITY;
- else
- cmd &= ~PCI_COMMAND_PARITY;
- if (edev->config_space[1] & PCI_COMMAND_SERR)
- cmd |= PCI_COMMAND_SERR;
- else
- cmd &= ~PCI_COMMAND_SERR;
- eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd);
-
- return NULL;
-}
-
-/**
- * eeh_pe_restore_bars - Restore the PCI config space info
- * @pe: EEH PE
- *
- * This routine performs a recursive walk to the children
- * of this device as well.
- */
-void eeh_pe_restore_bars(struct eeh_pe *pe)
-{
- /*
- * We needn't take the EEH lock since eeh_pe_dev_traverse()
- * will take that.
- */
- eeh_pe_dev_traverse(pe, eeh_restore_one_device_bars, NULL);
-}
-
-/**
- * eeh_pe_bus_get - Retrieve PCI bus according to the given PE
- * @pe: EEH PE
- *
- * Retrieve the PCI bus according to the given PE. Basically,
- * there're 3 types of PEs: PHB/Bus/Device. For PHB PE, the
- * primary PCI bus will be retrieved. The parent bus will be
- * returned for BUS PE. However, we don't have associated PCI
- * bus for DEVICE PE.
- */
-struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe)
-{
- struct pci_bus *bus = NULL;
- struct eeh_dev *edev;
- struct pci_dev *pdev;
-
- eeh_lock();
-
- if (pe->type & EEH_PE_PHB) {
- bus = pe->phb->bus;
- } else if (pe->type & EEH_PE_BUS ||
- pe->type & EEH_PE_DEVICE) {
- edev = list_first_entry(&pe->edevs, struct eeh_dev, list);
- pdev = eeh_dev_to_pci_dev(edev);
- if (pdev)
- bus = pdev->bus;
- }
-
- eeh_unlock();
-
- return bus;
-}
+++ /dev/null
-/*
- * Sysfs entries for PCI Error Recovery for PAPR-compliant platform.
- * Copyright IBM Corporation 2007
- * Copyright Linas Vepstas <linas@austin.ibm.com> 2007
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send comments and feedback to Linas Vepstas <linas@austin.ibm.com>
- */
-#include <linux/pci.h>
-#include <linux/stat.h>
-#include <asm/ppc-pci.h>
-#include <asm/pci-bridge.h>
-
-/**
- * EEH_SHOW_ATTR -- Create sysfs entry for eeh statistic
- * @_name: name of file in sysfs directory
- * @_memb: name of member in struct pci_dn to access
- * @_format: printf format for display
- *
- * All of the attributes look very similar, so just
- * auto-gen a cut-n-paste routine to display them.
- */
-#define EEH_SHOW_ATTR(_name,_memb,_format) \
-static ssize_t eeh_show_##_name(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- struct pci_dev *pdev = to_pci_dev(dev); \
- struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev); \
- \
- if (!edev) \
- return 0; \
- \
- return sprintf(buf, _format "\n", edev->_memb); \
-} \
-static DEVICE_ATTR(_name, S_IRUGO, eeh_show_##_name, NULL);
-
-EEH_SHOW_ATTR(eeh_mode, mode, "0x%x");
-EEH_SHOW_ATTR(eeh_config_addr, config_addr, "0x%x");
-EEH_SHOW_ATTR(eeh_pe_config_addr, pe_config_addr, "0x%x");
-
-void eeh_sysfs_add_device(struct pci_dev *pdev)
-{
- int rc=0;
-
- rc += device_create_file(&pdev->dev, &dev_attr_eeh_mode);
- rc += device_create_file(&pdev->dev, &dev_attr_eeh_config_addr);
- rc += device_create_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
-
- if (rc)
- printk(KERN_WARNING "EEH: Unable to create sysfs entries\n");
-}
-
-void eeh_sysfs_remove_device(struct pci_dev *pdev)
-{
- device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
- device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
- device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
-}
-
}
EXPORT_SYMBOL_GPL(pcibios_find_pci_bus);
-/**
- * __pcibios_remove_pci_devices - remove all devices under this bus
- * @bus: the indicated PCI bus
- * @purge_pe: destroy the PE on removal of PCI devices
- *
- * Remove all of the PCI devices under this bus both from the
- * linux pci device tree, and from the powerpc EEH address cache.
- * By default, the corresponding PE will be destroied during the
- * normal PCI hotplug path. For PCI hotplug during EEH recovery,
- * the corresponding PE won't be destroied and deallocated.
- */
-void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
-{
- struct pci_dev *dev, *tmp;
- struct pci_bus *child_bus;
-
- /* First go down child busses */
- list_for_each_entry(child_bus, &bus->children, node)
- __pcibios_remove_pci_devices(child_bus, purge_pe);
-
- pr_debug("PCI: Removing devices on bus %04x:%02x\n",
- pci_domain_nr(bus), bus->number);
- list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
- pr_debug(" * Removing %s...\n", pci_name(dev));
- eeh_remove_bus_device(dev, purge_pe);
- pci_stop_and_remove_bus_device(dev);
- }
-}
-
-/**
- * pcibios_remove_pci_devices - remove all devices under this bus
- *
- * Remove all of the PCI devices under this bus both from the
- * linux pci device tree, and from the powerpc EEH address cache.
- */
-void pcibios_remove_pci_devices(struct pci_bus *bus)
-{
- __pcibios_remove_pci_devices(bus, 1);
-}
-EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
-
-/**
- * pcibios_add_pci_devices - adds new pci devices to bus
- *
- * This routine will find and fixup new pci devices under
- * the indicated bus. This routine presumes that there
- * might already be some devices under this bridge, so
- * it carefully tries to add only new devices. (And that
- * is how this routine differs from other, similar pcibios
- * routines.)
- */
-void pcibios_add_pci_devices(struct pci_bus * bus)
-{
- int slotno, num, mode, pass, max;
- struct pci_dev *dev;
- struct device_node *dn = pci_bus_to_OF_node(bus);
-
- eeh_add_device_tree_early(dn);
-
- mode = PCI_PROBE_NORMAL;
- if (ppc_md.pci_probe_mode)
- mode = ppc_md.pci_probe_mode(bus);
-
- if (mode == PCI_PROBE_DEVTREE) {
- /* use ofdt-based probe */
- of_rescan_bus(dn, bus);
- } else if (mode == PCI_PROBE_NORMAL) {
- /* use legacy probe */
- slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
- num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
- if (!num)
- return;
- pcibios_setup_bus_devices(bus);
- max = bus->busn_res.start;
- for (pass=0; pass < 2; pass++)
- list_for_each_entry(dev, &bus->devices, bus_list) {
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
- dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
- max = pci_scan_bridge(bus, dev, max, pass);
- }
- }
- pcibios_finish_adding_to_bus(bus);
-}
-EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
-
struct pci_controller *init_phb_dynamic(struct device_node *dn)
{
struct pci_controller *phb;
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff