ARM: OMAP1: USB: move omap_usb_config to platform data
authorAaro Koskinen <aaro.koskinen@iki.fi>
Fri, 6 Dec 2013 14:13:04 +0000 (16:13 +0200)
committerFelipe Balbi <balbi@ti.com>
Fri, 6 Dec 2013 20:36:31 +0000 (14:36 -0600)
Move omap_usb_config to platform data, so that OTG driver can include it.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
arch/arm/mach-omap1/include/mach/usb.h
include/linux/platform_data/usb-omap1.h [new file with mode: 0644]

index 45e5ac707cbb799326fbd748ec04a1cb0ffde3ca..2c263051dc518ba6e822e17acb7a031d6cfc838f 100644 (file)
@@ -8,43 +8,7 @@
 #define        is_usb0_device(config)  0
 #endif
 
-struct omap_usb_config {
-       /* Configure drivers according to the connectors on your board:
-        *  - "A" connector (rectagular)
-        *      ... for host/OHCI use, set "register_host".
-        *  - "B" connector (squarish) or "Mini-B"
-        *      ... for device/gadget use, set "register_dev".
-        *  - "Mini-AB" connector (very similar to Mini-B)
-        *      ... for OTG use as device OR host, initialize "otg"
-        */
-       unsigned        register_host:1;
-       unsigned        register_dev:1;
-       u8              otg;    /* port number, 1-based:  usb1 == 2 */
-
-       u8              hmc_mode;
-
-       /* implicitly true if otg:  host supports remote wakeup? */
-       u8              rwc;
-
-       /* signaling pins used to talk to transceiver on usbN:
-        *  0 == usbN unused
-        *  2 == usb0-only, using internal transceiver
-        *  3 == 3 wire bidirectional
-        *  4 == 4 wire bidirectional
-        *  6 == 6 wire unidirectional (or TLL)
-        */
-       u8              pins[3];
-
-       struct platform_device *udc_device;
-       struct platform_device *ohci_device;
-       struct platform_device *otg_device;
-
-       u32 (*usb0_init)(unsigned nwires, unsigned is_device);
-       u32 (*usb1_init)(unsigned nwires);
-       u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
-
-       int (*ocpi_enable)(void);
-};
+#include <linux/platform_data/usb-omap1.h>
 
 void omap_otg_init(struct omap_usb_config *config);
 
diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h
new file mode 100644 (file)
index 0000000..8c7764d
--- /dev/null
@@ -0,0 +1,51 @@
+/*
+ * Platform data for OMAP1 USB
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __LINUX_USB_OMAP1_H
+#define __LINUX_USB_OMAP1_H
+
+#include <linux/platform_device.h>
+
+struct omap_usb_config {
+       /* Configure drivers according to the connectors on your board:
+        *  - "A" connector (rectagular)
+        *      ... for host/OHCI use, set "register_host".
+        *  - "B" connector (squarish) or "Mini-B"
+        *      ... for device/gadget use, set "register_dev".
+        *  - "Mini-AB" connector (very similar to Mini-B)
+        *      ... for OTG use as device OR host, initialize "otg"
+        */
+       unsigned        register_host:1;
+       unsigned        register_dev:1;
+       u8              otg;    /* port number, 1-based:  usb1 == 2 */
+
+       u8              hmc_mode;
+
+       /* implicitly true if otg:  host supports remote wakeup? */
+       u8              rwc;
+
+       /* signaling pins used to talk to transceiver on usbN:
+        *  0 == usbN unused
+        *  2 == usb0-only, using internal transceiver
+        *  3 == 3 wire bidirectional
+        *  4 == 4 wire bidirectional
+        *  6 == 6 wire unidirectional (or TLL)
+        */
+       u8              pins[3];
+
+       struct platform_device *udc_device;
+       struct platform_device *ohci_device;
+       struct platform_device *otg_device;
+
+       u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+       u32 (*usb1_init)(unsigned nwires);
+       u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+
+       int (*ocpi_enable)(void);
+};
+
+#endif /* __LINUX_USB_OMAP1_H */