#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:32:17 2005
+# Linux kernel version: 2.6.15-rc1
+# Mon Nov 14 15:27:00 2005
#
+CONFIG_PPC64=y
CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=128
#
# Code maturity level options
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
-# CONFIG_PPC_ISERIES is not set
CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
CONFIG_PPC_PSERIES=y
-# CONFIG_PPC_BPA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
+# CONFIG_PPC_CELL is not set
CONFIG_PPC_OF=y
CONFIG_XICS=y
+# CONFIG_U3_DART is not set
CONFIG_MPIC=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_SPLPAR=y
-CONFIG_KEXEC=y
+CONFIG_PPC_RTAS=y
+CONFIG_RTAS_ERROR_LOGGING=y
+CONFIG_RTAS_PROC=y
+CONFIG_RTAS_FLASH=m
+# CONFIG_MMIO_NVRAM is not set
CONFIG_IBMVIO=y
-# CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=128
+CONFIG_HOTPLUG_CPU=y
+CONFIG_KEXEC=y
+# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_PPC_SPLPAR=y
+CONFIG_EEH=y
+CONFIG_SCANLOG=m
+CONFIG_LPARCFG=y
+CONFIG_NUMA=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NODES_SPAN_OTHER_NODES=y
-CONFIG_NUMA=y
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_EEH=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=m
-CONFIG_SCANLOG=m
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_HOTPLUG_CPU=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
-# Bus Options
+# Bus options
#
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+CONFIG_KERNEL_START=0xc000000000000000
#
# Networking
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
#
# Macintosh device drivers
#
+# CONFIG_WINDFARM is not set
#
# Network device support
# CONFIG_IXGB_NAPI is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
-# CONFIG_2BUFF_MODE is not set
#
# Token Ring devices
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MACMODES=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
# CONFIG_NLS_UTF8 is not set
#
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
#
# Kernel hacking
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUGGER=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
CONFIG_IRQSTACKS=y
+# CONFIG_BOOTX_TEXT is not set
#
# Security options
#
# Hardware crypto devices
#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
procfs-$(CONFIG_PPC64) := proc_ppc64.o
obj-$(CONFIG_PROC_FS) += $(procfs-y)
rtaspci-$(CONFIG_PPC64) := rtas_pci.o
-obj-$(CONFIG_PPC_RTAS) += rtas.o $(rtaspci-y)
+obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y)
obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/time.h>
+
+
+#define MAX_RTC_WAIT 5000 /* 5 sec */
+#define RTAS_CLOCK_BUSY (-2)
+unsigned long __init rtas_get_boot_time(void)
+{
+ int ret[8];
+ int error, wait_time;
+ unsigned long max_wait_tb;
+
+ max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
+ do {
+ error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
+ if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
+ wait_time = rtas_extended_busy_delay_time(error);
+ /* This is boot time so we spin. */
+ udelay(wait_time*1000);
+ error = RTAS_CLOCK_BUSY;
+ }
+ } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb));
+
+ if (error != 0 && printk_ratelimit()) {
+ printk(KERN_WARNING "error: reading the clock failed (%d)\n",
+ error);
+ return 0;
+ }
+
+ return mktime(ret[0], ret[1], ret[2], ret[3], ret[4], ret[5]);
+}
+
+/* NOTE: get_rtc_time will get an error if executed in interrupt context
+ * and if a delay is needed to read the clock. In this case we just
+ * silently return without updating rtc_tm.
+ */
+void rtas_get_rtc_time(struct rtc_time *rtc_tm)
+{
+ int ret[8];
+ int error, wait_time;
+ unsigned long max_wait_tb;
+
+ max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
+ do {
+ error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
+ if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
+ if (in_interrupt() && printk_ratelimit()) {
+ memset(&rtc_tm, 0, sizeof(struct rtc_time));
+ printk(KERN_WARNING "error: reading clock"
+ " would delay interrupt\n");
+ return; /* delay not allowed */
+ }
+ wait_time = rtas_extended_busy_delay_time(error);
+ msleep(wait_time);
+ error = RTAS_CLOCK_BUSY;
+ }
+ } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb));
+
+ if (error != 0 && printk_ratelimit()) {
+ printk(KERN_WARNING "error: reading the clock failed (%d)\n",
+ error);
+ return;
+ }
+
+ rtc_tm->tm_sec = ret[5];
+ rtc_tm->tm_min = ret[4];
+ rtc_tm->tm_hour = ret[3];
+ rtc_tm->tm_mday = ret[2];
+ rtc_tm->tm_mon = ret[1] - 1;
+ rtc_tm->tm_year = ret[0] - 1900;
+}
+
+int rtas_set_rtc_time(struct rtc_time *tm)
+{
+ int error, wait_time;
+ unsigned long max_wait_tb;
+
+ max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
+ do {
+ error = rtas_call(rtas_token("set-time-of-day"), 7, 1, NULL,
+ tm->tm_year + 1900, tm->tm_mon + 1,
+ tm->tm_mday, tm->tm_hour, tm->tm_min,
+ tm->tm_sec, 0);
+ if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
+ if (in_interrupt())
+ return 1; /* probably decrementer */
+ wait_time = rtas_extended_busy_delay_time(error);
+ msleep(wait_time);
+ error = RTAS_CLOCK_BUSY;
+ }
+ } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb));
+
+ if (error != 0 && printk_ratelimit())
+ printk(KERN_WARNING "error: setting the clock failed (%d)\n",
+ error);
+
+ return 0;
+}
#define smu_set_rtc_time(tm, spin) 0
#endif
-unsigned long pmac_get_boot_time(void)
+unsigned long __init pmac_get_boot_time(void)
{
/* Get the time from the RTC, used only at boot time */
switch (sys_ctrler) {
obj-y += idle.o dma.o \
align.o \
- rtc.o \
iommu.o
pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o
+++ /dev/null
-/*
- * Real Time Clock interface for PPC64.
- *
- * Based on rtc.c by Paul Gortmaker
- *
- * This driver allows use of the real time clock
- * from user space. It exports the /dev/rtc
- * interface supporting various ioctl() and also the
- * /proc/driver/rtc pseudo-file for status information.
- *
- * Interface does not support RTC interrupts nor an alarm.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * 1.0 Mike Corrigan: IBM iSeries rtc support
- * 1.1 Dave Engebretsen: IBM pSeries rtc support
- */
-
-#define RTC_VERSION "1.1"
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/mc146818rtc.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <linux/bcd.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/rtas.h>
-
-#include <asm/machdep.h>
-
-/*
- * We sponge a minor off of the misc major. No need slurping
- * up another valuable major dev number for this. If you add
- * an ioctl, make sure you don't conflict with SPARC's RTC
- * ioctls.
- */
-
-static ssize_t rtc_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos);
-
-static int rtc_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
-
-static int rtc_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data);
-
-/*
- * If this driver ever becomes modularised, it will be really nice
- * to make the epoch retain its value across module reload...
- */
-
-static unsigned long epoch = 1900; /* year corresponding to 0x00 */
-
-static const unsigned char days_in_mo[] =
-{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
-/*
- * Now all the various file operations that we export.
- */
-
-static ssize_t rtc_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- return -EIO;
-}
-
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- struct rtc_time wtime;
-
- switch (cmd) {
- case RTC_RD_TIME: /* Read the time/date from RTC */
- {
- memset(&wtime, 0, sizeof(struct rtc_time));
- ppc_md.get_rtc_time(&wtime);
- break;
- }
- case RTC_SET_TIME: /* Set the RTC */
- {
- struct rtc_time rtc_tm;
- unsigned char mon, day, hrs, min, sec, leap_yr;
- unsigned int yrs;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- if (copy_from_user(&rtc_tm, (struct rtc_time __user *)arg,
- sizeof(struct rtc_time)))
- return -EFAULT;
-
- yrs = rtc_tm.tm_year;
- mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */
- day = rtc_tm.tm_mday;
- hrs = rtc_tm.tm_hour;
- min = rtc_tm.tm_min;
- sec = rtc_tm.tm_sec;
-
- if (yrs < 70)
- return -EINVAL;
-
- leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
- if ((mon > 12) || (day == 0))
- return -EINVAL;
-
- if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
- return -EINVAL;
-
- if ((hrs >= 24) || (min >= 60) || (sec >= 60))
- return -EINVAL;
-
- if ( yrs > 169 )
- return -EINVAL;
-
- ppc_md.set_rtc_time(&rtc_tm);
-
- return 0;
- }
- case RTC_EPOCH_READ: /* Read the epoch. */
- {
- return put_user (epoch, (unsigned long __user *)arg);
- }
- case RTC_EPOCH_SET: /* Set the epoch. */
- {
- /*
- * There were no RTC clocks before 1900.
- */
- if (arg < 1900)
- return -EINVAL;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- epoch = arg;
- return 0;
- }
- default:
- return -EINVAL;
- }
- return copy_to_user((void __user *)arg, &wtime, sizeof wtime) ? -EFAULT : 0;
-}
-
-static int rtc_open(struct inode *inode, struct file *file)
-{
- nonseekable_open(inode, file);
- return 0;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-/*
- * The various file operations we support.
- */
-static struct file_operations rtc_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .read = rtc_read,
- .ioctl = rtc_ioctl,
- .open = rtc_open,
- .release = rtc_release,
-};
-
-static struct miscdevice rtc_dev = {
- .minor = RTC_MINOR,
- .name = "rtc",
- .fops = &rtc_fops
-};
-
-static int __init rtc_init(void)
-{
- int retval;
-
- retval = misc_register(&rtc_dev);
- if(retval < 0)
- return retval;
-
-#ifdef CONFIG_PROC_FS
- if (create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, NULL)
- == NULL) {
- misc_deregister(&rtc_dev);
- return -ENOMEM;
- }
-#endif
-
- printk(KERN_INFO "i/pSeries Real Time Clock Driver v" RTC_VERSION "\n");
-
- return 0;
-}
-
-static void __exit rtc_exit (void)
-{
- remove_proc_entry ("driver/rtc", NULL);
- misc_deregister(&rtc_dev);
-}
-
-module_init(rtc_init);
-module_exit(rtc_exit);
-
-/*
- * Info exported via "/proc/driver/rtc".
- */
-
-static int rtc_proc_output (char *buf)
-{
-
- char *p;
- struct rtc_time tm;
-
- p = buf;
-
- ppc_md.get_rtc_time(&tm);
-
- /*
- * There is no way to tell if the luser has the RTC set for local
- * time or for Universal Standard Time (GMT). Probably local though.
- */
- p += sprintf(p,
- "rtc_time\t: %02d:%02d:%02d\n"
- "rtc_date\t: %04d-%02d-%02d\n"
- "rtc_epoch\t: %04lu\n",
- tm.tm_hour, tm.tm_min, tm.tm_sec,
- tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, epoch);
-
- p += sprintf(p,
- "DST_enable\t: no\n"
- "BCD\t\t: yes\n"
- "24hr\t\t: yes\n" );
-
- return p - buf;
-}
-
-static int rtc_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int len = rtc_proc_output (page);
- if (len <= off+count) *eof = 1;
- *start = page + off;
- len -= off;
- if (len>count) len = count;
- if (len<0) len = 0;
- return len;
-}
-
-#ifdef CONFIG_PPC_RTAS
-#define MAX_RTC_WAIT 5000 /* 5 sec */
-#define RTAS_CLOCK_BUSY (-2)
-unsigned long rtas_get_boot_time(void)
-{
- int ret[8];
- int error, wait_time;
- unsigned long max_wait_tb;
-
- max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
- do {
- error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
- if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
- wait_time = rtas_extended_busy_delay_time(error);
- /* This is boot time so we spin. */
- udelay(wait_time*1000);
- error = RTAS_CLOCK_BUSY;
- }
- } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb));
-
- if (error != 0 && printk_ratelimit()) {
- printk(KERN_WARNING "error: reading the clock failed (%d)\n",
- error);
- return 0;
- }
-
- return mktime(ret[0], ret[1], ret[2], ret[3], ret[4], ret[5]);
-}
-
-/* NOTE: get_rtc_time will get an error if executed in interrupt context
- * and if a delay is needed to read the clock. In this case we just
- * silently return without updating rtc_tm.
- */
-void rtas_get_rtc_time(struct rtc_time *rtc_tm)
-{
- int ret[8];
- int error, wait_time;
- unsigned long max_wait_tb;
-
- max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
- do {
- error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
- if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
- if (in_interrupt() && printk_ratelimit()) {
- printk(KERN_WARNING "error: reading clock would delay interrupt\n");
- return; /* delay not allowed */
- }
- wait_time = rtas_extended_busy_delay_time(error);
- msleep_interruptible(wait_time);
- error = RTAS_CLOCK_BUSY;
- }
- } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb));
-
- if (error != 0 && printk_ratelimit()) {
- printk(KERN_WARNING "error: reading the clock failed (%d)\n",
- error);
- return;
- }
-
- rtc_tm->tm_sec = ret[5];
- rtc_tm->tm_min = ret[4];
- rtc_tm->tm_hour = ret[3];
- rtc_tm->tm_mday = ret[2];
- rtc_tm->tm_mon = ret[1] - 1;
- rtc_tm->tm_year = ret[0] - 1900;
-}
-
-int rtas_set_rtc_time(struct rtc_time *tm)
-{
- int error, wait_time;
- unsigned long max_wait_tb;
-
- max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
- do {
- error = rtas_call(rtas_token("set-time-of-day"), 7, 1, NULL,
- tm->tm_year + 1900, tm->tm_mon + 1,
- tm->tm_mday, tm->tm_hour, tm->tm_min,
- tm->tm_sec, 0);
- if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
- if (in_interrupt())
- return 1; /* probably decrementer */
- wait_time = rtas_extended_busy_delay_time(error);
- msleep_interruptible(wait_time);
- error = RTAS_CLOCK_BUSY;
- }
- } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb));
-
- if (error != 0 && printk_ratelimit())
- printk(KERN_WARNING "error: setting the clock failed (%d)\n",
- error);
-
- return 0;
-}
-#endif
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32 && !SPARC64
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC32 && !SPARC64
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff