/* caller must call cfg80211_send_assoc_timeout() */
RX_MGMT_CFG80211_ASSOC_TIMEOUT,
+
+ /* used when a processed beacon causes a deauth */
+ RX_MGMT_CFG80211_TX_DEAUTH,
};
/* utils */
struct ieee80211_channel *channel,
const struct ieee80211_ht_operation *ht_oper,
const struct ieee80211_vht_operation *vht_oper,
- struct cfg80211_chan_def *chandef)
+ struct cfg80211_chan_def *chandef, bool verbose)
{
struct cfg80211_chan_def vht_chandef;
u32 ht_cfreq, ret;
* since we look at probe response/beacon data here
* it should be OK.
*/
- sdata_info(sdata,
- "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
- channel->center_freq, ht_cfreq,
- ht_oper->primary_chan, channel->band);
+ if (verbose)
+ sdata_info(sdata,
+ "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+ channel->center_freq, ht_cfreq,
+ ht_oper->primary_chan, channel->band);
ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
goto out;
}
vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
break;
default:
- sdata_info(sdata,
- "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
- vht_oper->chan_width);
+ if (verbose)
+ sdata_info(sdata,
+ "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
+ vht_oper->chan_width);
ret = IEEE80211_STA_DISABLE_VHT;
goto out;
}
if (!cfg80211_chandef_valid(&vht_chandef)) {
- sdata_info(sdata,
- "AP VHT information is invalid, disable VHT\n");
+ if (verbose)
+ sdata_info(sdata,
+ "AP VHT information is invalid, disable VHT\n");
ret = IEEE80211_STA_DISABLE_VHT;
goto out;
}
}
if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
- sdata_info(sdata,
- "AP VHT information doesn't match HT, disable VHT\n");
+ if (verbose)
+ sdata_info(sdata,
+ "AP VHT information doesn't match HT, disable VHT\n");
ret = IEEE80211_STA_DISABLE_VHT;
goto out;
}
ret |= chandef_downgrade(chandef);
}
- if (chandef->width != vht_chandef.width)
+ if (chandef->width != vht_chandef.width && verbose)
sdata_info(sdata,
"capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
return ret;
}
-static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata,
- struct sta_info *sta,
- struct ieee80211_ht_operation *ht_oper,
- const u8 *bssid, bool reconfig)
+static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
+ struct sta_info *sta,
+ const struct ieee80211_ht_operation *ht_oper,
+ const struct ieee80211_vht_operation *vht_oper,
+ const u8 *bssid, u32 *changed)
{
struct ieee80211_local *local = sdata->local;
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
- u32 changed = 0;
+ struct cfg80211_chan_def chandef;
u16 ht_opmode;
- bool disable_40 = false;
+ u32 flags;
+ enum ieee80211_sta_rx_bandwidth new_sta_bw;
+ int ret;
- if (WARN_ON_ONCE(!sta))
+ /* if HT was/is disabled, don't track any bandwidth changes */
+ if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
return 0;
+ /* don't check VHT if we associated as non-VHT station */
+ if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
+ vht_oper = NULL;
+
+ if (WARN_ON_ONCE(!sta))
+ return -EINVAL;
+
chan = sdata->vif.bss_conf.chandef.chan;
sband = local->hw.wiphy->bands[chan->band];
- switch (sdata->vif.bss_conf.chandef.width) {
+ /* calculate new channel (type) based on HT/VHT operation IEs */
+ flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper,
+ vht_oper, &chandef, false);
+
+ /*
+ * Downgrade the new channel if we associated with restricted
+ * capabilities. For example, if we associated as a 20 MHz STA
+ * to a 40 MHz AP (due to regulatory, capabilities or config
+ * reasons) then switching to a 40 MHz channel now won't do us
+ * any good -- we couldn't use it with the AP.
+ */
+ if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
+ chandef.width == NL80211_CHAN_WIDTH_80P80)
+ flags |= chandef_downgrade(&chandef);
+ if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
+ chandef.width == NL80211_CHAN_WIDTH_160)
+ flags |= chandef_downgrade(&chandef);
+ if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
+ chandef.width > NL80211_CHAN_WIDTH_20)
+ flags |= chandef_downgrade(&chandef);
+
+ if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
+ return 0;
+
+ sdata_info(sdata,
+ "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
+ ifmgd->bssid, chandef.chan->center_freq, chandef.width,
+ chandef.center_freq1, chandef.center_freq2);
+
+ if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
+ IEEE80211_STA_DISABLE_VHT |
+ IEEE80211_STA_DISABLE_40MHZ |
+ IEEE80211_STA_DISABLE_80P80MHZ |
+ IEEE80211_STA_DISABLE_160MHZ)) ||
+ !cfg80211_chandef_valid(&chandef)) {
+ sdata_info(sdata,
+ "AP %pM changed bandwidth in a way we can't support - disconnect\n",
+ ifmgd->bssid);
+ return -EINVAL;
+ }
+
+ switch (chandef.width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ case NL80211_CHAN_WIDTH_20:
+ new_sta_bw = IEEE80211_STA_RX_BW_20;
+ break;
case NL80211_CHAN_WIDTH_40:
- if (chan->center_freq >
- sdata->vif.bss_conf.chandef.center_freq1 &&
- chan->flags & IEEE80211_CHAN_NO_HT40MINUS)
- disable_40 = true;
- if (chan->center_freq <
- sdata->vif.bss_conf.chandef.center_freq1 &&
- chan->flags & IEEE80211_CHAN_NO_HT40PLUS)
- disable_40 = true;
+ new_sta_bw = IEEE80211_STA_RX_BW_40;
break;
- default:
+ case NL80211_CHAN_WIDTH_80:
+ new_sta_bw = IEEE80211_STA_RX_BW_80;
break;
+ case NL80211_CHAN_WIDTH_80P80:
+ case NL80211_CHAN_WIDTH_160:
+ new_sta_bw = IEEE80211_STA_RX_BW_160;
+ break;
+ default:
+ return -EINVAL;
}
- /* This can change during the lifetime of the BSS */
- if (!(ht_oper->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY))
- disable_40 = true;
+ if (new_sta_bw > sta->cur_max_bandwidth)
+ new_sta_bw = sta->cur_max_bandwidth;
- if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
- disable_40 = true;
+ if (new_sta_bw < sta->sta.bandwidth) {
+ sta->sta.bandwidth = new_sta_bw;
+ rate_control_rate_update(local, sband, sta,
+ IEEE80211_RC_BW_CHANGED);
+ }
- if (disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) {
- if (disable_40)
- sta->sta.bandwidth = IEEE80211_STA_RX_BW_20;
- else
- sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta);
+ ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
+ if (ret) {
+ sdata_info(sdata,
+ "AP %pM changed bandwidth to incompatible one - disconnect\n",
+ ifmgd->bssid);
+ return ret;
+ }
- if (reconfig)
- rate_control_rate_update(local, sband, sta,
- IEEE80211_RC_BW_CHANGED);
+ if (new_sta_bw > sta->sta.bandwidth) {
+ sta->sta.bandwidth = new_sta_bw;
+ rate_control_rate_update(local, sband, sta,
+ IEEE80211_RC_BW_CHANGED);
}
ht_opmode = le16_to_cpu(ht_oper->operation_mode);
/* if bss configuration changed store the new one */
- if (!reconfig || (sdata->vif.bss_conf.ht_operation_mode != ht_opmode)) {
- changed |= BSS_CHANGED_HT;
+ if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
+ *changed |= BSS_CHANGED_HT;
sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
}
- return changed;
+ return 0;
}
/* frame sending functions */
ifmgd->aid = aid;
+ /*
+ * We previously checked these in the beacon/probe response, so
+ * they should be present here. This is just a safety net.
+ */
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
+ (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) {
+ sdata_info(sdata,
+ "HT AP is missing WMM params or HT capability/operation in AssocResp\n");
+ return false;
+ }
+
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
+ (!elems.vht_cap_elem || !elems.vht_operation)) {
+ sdata_info(sdata,
+ "VHT AP is missing VHT capability/operation in AssocResp\n");
+ return false;
+ }
+
mutex_lock(&sdata->local->sta_mtx);
/*
* station info was already allocated and inserted before
sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
+ /* Set up internal HT/VHT capabilities */
if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
elems.ht_cap_elem, sta);
ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
elems.vht_cap_elem, sta);
- if (elems.ht_operation && elems.wmm_param &&
- !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
- changed |= ieee80211_config_ht_tx(sdata, sta,
- elems.ht_operation,
- cbss->bssid, false);
+ /*
+ * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
+ * in their association response, so ignore that data for our own
+ * configuration. If it changed since the last beacon, we'll get the
+ * next beacon and update then.
+ */
/*
* If an operating mode notification IE is present, override the
(1ULL << WLAN_EID_HT_CAPABILITY) |
(1ULL << WLAN_EID_HT_OPERATION);
-static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgmt *mgmt,
- size_t len,
- struct ieee80211_rx_status *rx_status)
+static enum rx_mgmt_action
+ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgmt *mgmt, size_t len,
+ u8 *deauth_buf, struct ieee80211_rx_status *rx_status)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
/* Process beacon from the current BSS */
baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
if (baselen > len)
- return;
+ return RX_MGMT_NONE;
rcu_read_lock();
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
if (!chanctx_conf) {
rcu_read_unlock();
- return;
+ return RX_MGMT_NONE;
}
if (rx_status->freq != chanctx_conf->def.chan->center_freq) {
rcu_read_unlock();
- return;
+ return RX_MGMT_NONE;
}
chan = chanctx_conf->def.chan;
rcu_read_unlock();
ifmgd->assoc_data->timeout = jiffies;
ifmgd->assoc_data->timeout_started = true;
run_again(ifmgd, ifmgd->assoc_data->timeout);
- return;
+ return RX_MGMT_NONE;
}
if (!ifmgd->associated ||
!ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
- return;
+ return RX_MGMT_NONE;
bssid = ifmgd->associated->bssid;
/* Track average RSSI from the Beacon frames of the current AP */
}
if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
- return;
+ return RX_MGMT_NONE;
ifmgd->beacon_crc = ncrc;
ifmgd->beacon_crc_valid = true;
mutex_lock(&local->sta_mtx);
sta = sta_info_get(sdata, bssid);
- if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param &&
- !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
- changed |= ieee80211_config_ht_tx(sdata, sta,
- elems.ht_operation,
- bssid, true);
+ if (ieee80211_config_bw(sdata, sta, elems.ht_operation,
+ elems.vht_operation, bssid, &changed)) {
+ mutex_unlock(&local->sta_mtx);
+ ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
+ WLAN_REASON_DEAUTH_LEAVING,
+ true, deauth_buf);
+ return RX_MGMT_CFG80211_TX_DEAUTH;
+ }
if (sta && elems.opmode_notif)
ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
elems.pwr_constr_elem);
ieee80211_bss_info_change_notify(sdata, changed);
+
+ return RX_MGMT_NONE;
}
void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt;
struct cfg80211_bss *bss = NULL;
enum rx_mgmt_action rma = RX_MGMT_NONE;
+ u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
u16 fc;
rx_status = (struct ieee80211_rx_status *) skb->cb;
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_BEACON:
- ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
+ rma = ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len,
+ deauth_buf, rx_status);
break;
case IEEE80211_STYPE_PROBE_RESP:
ieee80211_rx_mgmt_probe_resp(sdata, skb);
case RX_MGMT_CFG80211_ASSOC_TIMEOUT:
cfg80211_send_assoc_timeout(sdata->dev, mgmt->bssid);
break;
+ case RX_MGMT_CFG80211_TX_DEAUTH:
+ cfg80211_send_deauth(sdata->dev, deauth_buf,
+ sizeof(deauth_buf));
+ break;
default:
WARN(1, "unexpected: %d", rma);
}
ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
cbss->channel,
ht_oper, vht_oper,
- &chandef);
+ &chandef, true);
sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
local->rx_chains);
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff