memory: mvebu-devbus: split functions

The mvebu-devbus driver currently only supports the Armada 370/XP
family, but it can also cover the Orion5x family. However, the Orion5x
family has a different organization of the registers.

Therefore, in preparation to the introduction of Orion5x support, we
separate into two functions the code that 1/ retrieves the timing
parameters from the Device Tree and 2/ applies those timings
parameters into the hardware registers.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1398202002-28530-8-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c
index 0f196b36cc3e26f38f6f08e9b4eb05ab6b82f0a2..5dc9c6360943a164b065d533a47c24cc0a984623 100644 (file)
--- a/drivers/memory/mvebu-devbus.c
+++ b/drivers/memory/mvebu-devbus.c
@@ -89,19 +89,15 @@ static int get_timing_param_ps(struct devbus *devbus,
        return 0;
 }
 
-static int devbus_set_timing_params(struct devbus *devbus,
-                                   struct device_node *node)
+static int devbus_get_timing_params(struct devbus *devbus,
+                                   struct device_node *node,
+                                   struct devbus_read_params *r,
+                                   struct devbus_write_params *w)
 {
-       struct devbus_read_params r;
-       struct devbus_write_params w;
-       u32 value;
        int err;
 
-       dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n",
-               devbus->tick_ps);
-
        /* Get read timings */
-       err = of_property_read_u32(node, "devbus,bus-width", &r.bus_width);
+       err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width);
        if (err < 0) {
                dev_err(devbus->dev,
                        "%s has no 'devbus,bus-width' property\n",
@@ -113,48 +109,48 @@ static int devbus_set_timing_params(struct devbus *devbus,
         * The bus width is encoded into the register as 0 for 8 bits,
         * and 1 for 16 bits, so we do the necessary conversion here.
         */
-       if (r.bus_width == 8)
-               r.bus_width = 0;
-       else if (r.bus_width == 16)
-               r.bus_width = 1;
+       if (r->bus_width == 8)
+               r->bus_width = 0;
+       else if (r->bus_width == 16)
+               r->bus_width = 1;
        else {
-               dev_err(devbus->dev, "invalid bus width %d\n", r.bus_width);
+               dev_err(devbus->dev, "invalid bus width %d\n", r->bus_width);
                return -EINVAL;
        }
 
        err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps",
-                                &r.badr_skew);
+                                &r->badr_skew);
        if (err < 0)
                return err;
 
        err = get_timing_param_ps(devbus, node, "devbus,turn-off-ps",
-                                &r.turn_off);
+                                &r->turn_off);
        if (err < 0)
                return err;
 
        err = get_timing_param_ps(devbus, node, "devbus,acc-first-ps",
-                                &r.acc_first);
+                                &r->acc_first);
        if (err < 0)
                return err;
 
        err = get_timing_param_ps(devbus, node, "devbus,acc-next-ps",
-                                &r.acc_next);
+                                &r->acc_next);
        if (err < 0)
                return err;
 
        err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps",
-                                &r.rd_setup);
+                                &r->rd_setup);
        if (err < 0)
                return err;
 
        err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps",
-                                &r.rd_hold);
+                                &r->rd_hold);
        if (err < 0)
                return err;
 
        /* Get write timings */
        err = of_property_read_u32(node, "devbus,sync-enable",
-                                 &w.sync_enable);
+                                 &w->sync_enable);
        if (err < 0) {
                dev_err(devbus->dev,
                        "%s has no 'devbus,sync-enable' property\n",
@@ -163,28 +159,38 @@ static int devbus_set_timing_params(struct devbus *devbus,
        }
 
        err = get_timing_param_ps(devbus, node, "devbus,ale-wr-ps",
-                                &w.ale_wr);
+                                &w->ale_wr);
        if (err < 0)
                return err;
 
        err = get_timing_param_ps(devbus, node, "devbus,wr-low-ps",
-                                &w.wr_low);
+                                &w->wr_low);
        if (err < 0)
                return err;
 
        err = get_timing_param_ps(devbus, node, "devbus,wr-high-ps",
-                                &w.wr_high);
+                                &w->wr_high);
        if (err < 0)
                return err;
 
+       return 0;
+}
+
+static void devbus_armada_set_timing_params(struct devbus *devbus,
+                                          struct device_node *node,
+                                          struct devbus_read_params *r,
+                                          struct devbus_write_params *w)
+{
+       u32 value;
+
        /* Set read timings */
-       value = r.bus_width << ARMADA_DEV_WIDTH_SHIFT |
-               r.badr_skew << ARMADA_BADR_SKEW_SHIFT |
-               r.rd_hold   << ARMADA_RD_HOLD_SHIFT   |
-               r.acc_next  << ARMADA_ACC_NEXT_SHIFT  |
-               r.rd_setup  << ARMADA_RD_SETUP_SHIFT  |
-               r.acc_first << ARMADA_ACC_FIRST_SHIFT |
-               r.turn_off;
+       value = r->bus_width << ARMADA_DEV_WIDTH_SHIFT |
+               r->badr_skew << ARMADA_BADR_SKEW_SHIFT |
+               r->rd_hold   << ARMADA_RD_HOLD_SHIFT   |
+               r->acc_next  << ARMADA_ACC_NEXT_SHIFT  |
+               r->rd_setup  << ARMADA_RD_SETUP_SHIFT  |
+               r->acc_first << ARMADA_ACC_FIRST_SHIFT |
+               r->turn_off;
 
        dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n",
                devbus->base + ARMADA_READ_PARAM_OFFSET,
@@ -193,24 +199,24 @@ static int devbus_set_timing_params(struct devbus *devbus,
        writel(value, devbus->base + ARMADA_READ_PARAM_OFFSET);
 
        /* Set write timings */
-       value = w.sync_enable  << ARMADA_SYNC_ENABLE_SHIFT |
-               w.wr_low       << ARMADA_WR_LOW_SHIFT      |
-               w.wr_high      << ARMADA_WR_HIGH_SHIFT     |
-               w.ale_wr;
+       value = w->sync_enable  << ARMADA_SYNC_ENABLE_SHIFT |
+               w->wr_low       << ARMADA_WR_LOW_SHIFT      |
+               w->wr_high      << ARMADA_WR_HIGH_SHIFT     |
+               w->ale_wr;
 
        dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n",
                devbus->base + ARMADA_WRITE_PARAM_OFFSET,
                value);
 
        writel(value, devbus->base + ARMADA_WRITE_PARAM_OFFSET);
-
-       return 0;
 }
 
 static int mvebu_devbus_probe(struct platform_device *pdev)
 {
        struct device *dev = &pdev->dev;
        struct device_node *node = pdev->dev.of_node;
+       struct devbus_read_params r;
+       struct devbus_write_params w;
        struct devbus *devbus;
        struct resource *res;
        struct clk *clk;
@@ -240,11 +246,17 @@ static int mvebu_devbus_probe(struct platform_device *pdev)
        rate = clk_get_rate(clk) / 1000;
        devbus->tick_ps = 1000000000 / rate;
 
-       /* Read the device tree node and set the new timing parameters */
-       err = devbus_set_timing_params(devbus, node);
+       dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n",
+               devbus->tick_ps);
+
+       /* Read the Device Tree node */
+       err = devbus_get_timing_params(devbus, node, &r, &w);
        if (err < 0)
                return err;
 
+       /* Set the new timing parameters */
+       devbus_armada_set_timing_params(devbus, node, &r, &w);
+
        /*
         * We need to create a child device explicitly from here to
         * guarantee that the child will be probed after the timing