platforms += jz4740
platforms += lantiq
platforms += lasat
-platforms += loongson
-platforms += loongson1
+platforms += loongson32
+platforms += loongson64
platforms += mti-malta
platforms += mti-sead3
platforms += netlogic
select HAVE_SYSCALL_TRACEPOINTS
select ARCH_HAS_ELF_RANDOMIZE
select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
- select RTC_LIB if !MACH_LOONGSON
+ select RTC_LIB if !MACH_LOONGSON64
select GENERIC_ATOMIC64 if !64BIT
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select HAVE_DMA_ATTRS
select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
select SYS_SUPPORTS_LITTLE_ENDIAN
-config MACH_LOONGSON
- bool "Loongson family of machines"
+config MACH_LOONGSON32
+ bool "Loongson-1 family of machines"
select SYS_SUPPORTS_ZBOOT
help
- This enables the support of Loongson family of machines.
+ This enables support for the Loongson-1 family of machines.
- Loongson is a family of general-purpose MIPS-compatible CPUs.
- developed at Institute of Computing Technology (ICT),
- Chinese Academy of Sciences (CAS) in the People's Republic
- of China. The chief architect is Professor Weiwu Hu.
+ Loongson-1 is a family of 32-bit MIPS-compatible SoCs developed by
+ the Institute of Computing Technology (ICT), Chinese Academy of
+ Sciences (CAS).
-config MACH_LOONGSON1
- bool "Loongson 1 family of machines"
+config MACH_LOONGSON64
+ bool "Loongson-2/3 family of machines"
select SYS_SUPPORTS_ZBOOT
help
- This enables support for the Loongson 1 based machines.
+ This enables the support of Loongson-2/3 family of machines.
- Loongson 1 is a family of 32-bit MIPS-compatible SoCs developed by
- the ICT (Institute of Computing Technology) and the Chinese Academy
- of Sciences.
+ Loongson-2 is a family of single-core CPUs and Loongson-3 is a
+ family of multi-core CPUs. They are both 64-bit general-purpose
+ MIPS-compatible CPUs. Loongson-2/3 are developed by the Institute
+ of Computing Technology (ICT), Chinese Academy of Sciences (CAS)
+ in the People's Republic of China. The chief architect is Professor
+ Weiwu Hu.
config MACH_PISTACHIO
bool "IMG Pistachio SoC based boards"
source "arch/mips/txx9/Kconfig"
source "arch/mips/vr41xx/Kconfig"
source "arch/mips/cavium-octeon/Kconfig"
-source "arch/mips/loongson/Kconfig"
-source "arch/mips/loongson1/Kconfig"
+source "arch/mips/loongson32/Kconfig"
+source "arch/mips/loongson64/Kconfig"
source "arch/mips/netlogic/Kconfig"
source "arch/mips/paravirt/Kconfig"
#include <asm/addrspace.h>
-#if defined(CONFIG_MACH_LOONGSON) || defined(CONFIG_MIPS_MALTA)
+#if defined(CONFIG_MACH_LOONGSON64) || defined(CONFIG_MIPS_MALTA)
#define UART_BASE 0x1fd003f8
#define PORT(offset) (CKSEG1ADDR(UART_BASE) + (offset))
#endif
-CONFIG_MACH_LOONGSON=y
+CONFIG_MACH_LOONGSON64=y
CONFIG_64BIT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MACH_LOONGSON=y
+CONFIG_MACH_LOONGSON64=y
CONFIG_LEMOTE_MACH2F=y
CONFIG_CS5536_MFGPT=y
CONFIG_64BIT=y
-CONFIG_MACH_LOONGSON=y
+CONFIG_MACH_LOONGSON64=y
CONFIG_SWIOTLB=y
CONFIG_LOONGSON_MACH3X=y
CONFIG_CPU_LOONGSON3=y
-CONFIG_MACH_LOONGSON1=y
+CONFIG_MACH_LOONGSON32=y
CONFIG_PREEMPT=y
# CONFIG_SECCOMP is not set
CONFIG_EXPERIMENTAL=y
+++ /dev/null
-#ifndef __ASM_MACH_LOONGSON_BOOT_PARAM_H_
-#define __ASM_MACH_LOONGSON_BOOT_PARAM_H_
-
-#define SYSTEM_RAM_LOW 1
-#define SYSTEM_RAM_HIGH 2
-#define MEM_RESERVED 3
-#define PCI_IO 4
-#define PCI_MEM 5
-#define LOONGSON_CFG_REG 6
-#define VIDEO_ROM 7
-#define ADAPTER_ROM 8
-#define ACPI_TABLE 9
-#define SMBIOS_TABLE 10
-#define MAX_MEMORY_TYPE 11
-
-#define LOONGSON3_BOOT_MEM_MAP_MAX 128
-struct efi_memory_map_loongson {
- u16 vers; /* version of efi_memory_map */
- u32 nr_map; /* number of memory_maps */
- u32 mem_freq; /* memory frequence */
- struct mem_map {
- u32 node_id; /* node_id which memory attached to */
- u32 mem_type; /* system memory, pci memory, pci io, etc. */
- u64 mem_start; /* memory map start address */
- u32 mem_size; /* each memory_map size, not the total size */
- } map[LOONGSON3_BOOT_MEM_MAP_MAX];
-} __packed;
-
-enum loongson_cpu_type {
- Loongson_2E = 0,
- Loongson_2F = 1,
- Loongson_3A = 2,
- Loongson_3B = 3,
- Loongson_1A = 4,
- Loongson_1B = 5
-};
-
-/*
- * Capability and feature descriptor structure for MIPS CPU
- */
-struct efi_cpuinfo_loongson {
- u16 vers; /* version of efi_cpuinfo_loongson */
- u32 processor_id; /* PRID, e.g. 6305, 6306 */
- u32 cputype; /* Loongson_3A/3B, etc. */
- u32 total_node; /* num of total numa nodes */
- u16 cpu_startup_core_id; /* Boot core id */
- u16 reserved_cores_mask;
- u32 cpu_clock_freq; /* cpu_clock */
- u32 nr_cpus;
-} __packed;
-
-#define MAX_UARTS 64
-struct uart_device {
- u32 iotype; /* see include/linux/serial_core.h */
- u32 uartclk;
- u32 int_offset;
- u64 uart_base;
-} __packed;
-
-#define MAX_SENSORS 64
-#define SENSOR_TEMPER 0x00000001
-#define SENSOR_VOLTAGE 0x00000002
-#define SENSOR_FAN 0x00000004
-struct sensor_device {
- char name[32]; /* a formal name */
- char label[64]; /* a flexible description */
- u32 type; /* SENSOR_* */
- u32 id; /* instance id of a sensor-class */
- u32 fan_policy; /* see loongson_hwmon.h */
- u32 fan_percent;/* only for constant speed policy */
- u64 base_addr; /* base address of device registers */
-} __packed;
-
-struct system_loongson {
- u16 vers; /* version of system_loongson */
- u32 ccnuma_smp; /* 0: no numa; 1: has numa */
- u32 sing_double_channel; /* 1:single; 2:double */
- u32 nr_uarts;
- struct uart_device uarts[MAX_UARTS];
- u32 nr_sensors;
- struct sensor_device sensors[MAX_SENSORS];
- char has_ec;
- char ec_name[32];
- u64 ec_base_addr;
- char has_tcm;
- char tcm_name[32];
- u64 tcm_base_addr;
- u64 workarounds; /* see workarounds.h */
-} __packed;
-
-struct irq_source_routing_table {
- u16 vers;
- u16 size;
- u16 rtr_bus;
- u16 rtr_devfn;
- u32 vendor;
- u32 device;
- u32 PIC_type; /* conform use HT or PCI to route to CPU-PIC */
- u64 ht_int_bit; /* 3A: 1<<24; 3B: 1<<16 */
- u64 ht_enable; /* irqs used in this PIC */
- u32 node_id; /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */
- u64 pci_mem_start_addr;
- u64 pci_mem_end_addr;
- u64 pci_io_start_addr;
- u64 pci_io_end_addr;
- u64 pci_config_addr;
- u32 dma_mask_bits;
-} __packed;
-
-struct interface_info {
- u16 vers; /* version of the specificition */
- u16 size;
- u8 flag;
- char description[64];
-} __packed;
-
-#define MAX_RESOURCE_NUMBER 128
-struct resource_loongson {
- u64 start; /* resource start address */
- u64 end; /* resource end address */
- char name[64];
- u32 flags;
-};
-
-struct archdev_data {}; /* arch specific additions */
-
-struct board_devices {
- char name[64]; /* hold the device name */
- u32 num_resources; /* number of device_resource */
- /* for each device's resource */
- struct resource_loongson resource[MAX_RESOURCE_NUMBER];
- /* arch specific additions */
- struct archdev_data archdata;
-};
-
-struct loongson_special_attribute {
- u16 vers; /* version of this special */
- char special_name[64]; /* special_atribute_name */
- u32 loongson_special_type; /* type of special device */
- /* for each device's resource */
- struct resource_loongson resource[MAX_RESOURCE_NUMBER];
-};
-
-struct loongson_params {
- u64 memory_offset; /* efi_memory_map_loongson struct offset */
- u64 cpu_offset; /* efi_cpuinfo_loongson struct offset */
- u64 system_offset; /* system_loongson struct offset */
- u64 irq_offset; /* irq_source_routing_table struct offset */
- u64 interface_offset; /* interface_info struct offset */
- u64 special_offset; /* loongson_special_attribute struct offset */
- u64 boarddev_table_offset; /* board_devices offset */
-};
-
-struct smbios_tables {
- u16 vers; /* version of smbios */
- u64 vga_bios; /* vga_bios address */
- struct loongson_params lp;
-};
-
-struct efi_reset_system_t {
- u64 ResetCold;
- u64 ResetWarm;
- u64 ResetType;
- u64 Shutdown;
- u64 DoSuspend; /* NULL if not support */
-};
-
-struct efi_loongson {
- u64 mps; /* MPS table */
- u64 acpi; /* ACPI table (IA64 ext 0.71) */
- u64 acpi20; /* ACPI table (ACPI 2.0) */
- struct smbios_tables smbios; /* SM BIOS table */
- u64 sal_systab; /* SAL system table */
- u64 boot_info; /* boot info table */
-};
-
-struct boot_params {
- struct efi_loongson efi;
- struct efi_reset_system_t reset_system;
-};
-
-struct loongson_system_configuration {
- u32 nr_cpus;
- u32 nr_nodes;
- int cores_per_node;
- int cores_per_package;
- u16 boot_cpu_id;
- u16 reserved_cpus_mask;
- enum loongson_cpu_type cputype;
- u64 ht_control_base;
- u64 pci_mem_start_addr;
- u64 pci_mem_end_addr;
- u64 pci_io_base;
- u64 restart_addr;
- u64 poweroff_addr;
- u64 suspend_addr;
- u64 vgabios_addr;
- u32 dma_mask_bits;
- char ecname[32];
- u32 nr_uarts;
- struct uart_device uarts[MAX_UARTS];
- u32 nr_sensors;
- struct sensor_device sensors[MAX_SENSORS];
- u64 workarounds;
-};
-
-extern struct efi_memory_map_loongson *loongson_memmap;
-extern struct loongson_system_configuration loongson_sysconf;
-
-#endif
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2009 Wu Zhangjin <wuzhangjin@gmail.com>
- * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
- * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
- *
- * reference: /proc/cpuinfo,
- * arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
- * arch/mips/kernel/proc.c(show_cpuinfo),
- * loongson2f user manual.
- */
-
-#ifndef __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H
-
-#define cpu_dcache_line_size() 32
-#define cpu_icache_line_size() 32
-#define cpu_scache_line_size() 32
-
-
-#define cpu_has_32fpr 1
-#define cpu_has_3k_cache 0
-#define cpu_has_4k_cache 1
-#define cpu_has_4kex 1
-#define cpu_has_64bits 1
-#define cpu_has_cache_cdex_p 0
-#define cpu_has_cache_cdex_s 0
-#define cpu_has_counter 1
-#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000)
-#define cpu_has_divec 0
-#define cpu_has_dsp 0
-#define cpu_has_dsp2 0
-#define cpu_has_ejtag 0
-#define cpu_has_ic_fills_f_dc 0
-#define cpu_has_inclusive_pcaches 1
-#define cpu_has_llsc 1
-#define cpu_has_mcheck 0
-#define cpu_has_mdmx 0
-#define cpu_has_mips16 0
-#define cpu_has_mips32r2 0
-#define cpu_has_mips3d 0
-#define cpu_has_mips64r2 0
-#define cpu_has_mipsmt 0
-#define cpu_has_prefetch 0
-#define cpu_has_smartmips 0
-#define cpu_has_tlb 1
-#define cpu_has_tx39_cache 0
-#define cpu_has_userlocal 0
-#define cpu_has_vce 0
-#define cpu_has_veic 0
-#define cpu_has_vint 0
-#define cpu_has_vtag_icache 0
-#define cpu_has_watch 1
-#define cpu_has_local_ebase 0
-
-#define cpu_has_wsbh IS_ENABLED(CONFIG_CPU_LOONGSON3)
-
-#endif /* __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H */
+++ /dev/null
-/*
- * The header file of cs5536 south bridge.
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu <liujl@lemote.com>
- */
-
-#ifndef _CS5536_H
-#define _CS5536_H
-
-#include <linux/types.h>
-
-extern void _rdmsr(u32 msr, u32 *hi, u32 *lo);
-extern void _wrmsr(u32 msr, u32 hi, u32 lo);
-
-/*
- * MSR module base
- */
-#define CS5536_SB_MSR_BASE (0x00000000)
-#define CS5536_GLIU_MSR_BASE (0x10000000)
-#define CS5536_ILLEGAL_MSR_BASE (0x20000000)
-#define CS5536_USB_MSR_BASE (0x40000000)
-#define CS5536_IDE_MSR_BASE (0x60000000)
-#define CS5536_DIVIL_MSR_BASE (0x80000000)
-#define CS5536_ACC_MSR_BASE (0xa0000000)
-#define CS5536_UNUSED_MSR_BASE (0xc0000000)
-#define CS5536_GLCP_MSR_BASE (0xe0000000)
-
-#define SB_MSR_REG(offset) (CS5536_SB_MSR_BASE | (offset))
-#define GLIU_MSR_REG(offset) (CS5536_GLIU_MSR_BASE | (offset))
-#define ILLEGAL_MSR_REG(offset) (CS5536_ILLEGAL_MSR_BASE | (offset))
-#define USB_MSR_REG(offset) (CS5536_USB_MSR_BASE | (offset))
-#define IDE_MSR_REG(offset) (CS5536_IDE_MSR_BASE | (offset))
-#define DIVIL_MSR_REG(offset) (CS5536_DIVIL_MSR_BASE | (offset))
-#define ACC_MSR_REG(offset) (CS5536_ACC_MSR_BASE | (offset))
-#define UNUSED_MSR_REG(offset) (CS5536_UNUSED_MSR_BASE | (offset))
-#define GLCP_MSR_REG(offset) (CS5536_GLCP_MSR_BASE | (offset))
-
-/*
- * BAR SPACE OF VIRTUAL PCI :
- * range for pci probe use, length is the actual size.
- */
-/* IO space for all DIVIL modules */
-#define CS5536_IRQ_RANGE 0xffffffe0 /* USERD FOR PCI PROBE */
-#define CS5536_IRQ_LENGTH 0x20 /* THE REGS ACTUAL LENGTH */
-#define CS5536_SMB_RANGE 0xfffffff8
-#define CS5536_SMB_LENGTH 0x08
-#define CS5536_GPIO_RANGE 0xffffff00
-#define CS5536_GPIO_LENGTH 0x100
-#define CS5536_MFGPT_RANGE 0xffffffc0
-#define CS5536_MFGPT_LENGTH 0x40
-#define CS5536_ACPI_RANGE 0xffffffe0
-#define CS5536_ACPI_LENGTH 0x20
-#define CS5536_PMS_RANGE 0xffffff80
-#define CS5536_PMS_LENGTH 0x80
-/* IO space for IDE */
-#define CS5536_IDE_RANGE 0xfffffff0
-#define CS5536_IDE_LENGTH 0x10
-/* IO space for ACC */
-#define CS5536_ACC_RANGE 0xffffff80
-#define CS5536_ACC_LENGTH 0x80
-/* MEM space for ALL USB modules */
-#define CS5536_OHCI_RANGE 0xfffff000
-#define CS5536_OHCI_LENGTH 0x1000
-#define CS5536_EHCI_RANGE 0xfffff000
-#define CS5536_EHCI_LENGTH 0x1000
-
-/*
- * PCI MSR ACCESS
- */
-#define PCI_MSR_CTRL 0xF0
-#define PCI_MSR_ADDR 0xF4
-#define PCI_MSR_DATA_LO 0xF8
-#define PCI_MSR_DATA_HI 0xFC
-
-/**************** MSR *****************************/
-
-/*
- * GLIU STANDARD MSR
- */
-#define GLIU_CAP 0x00
-#define GLIU_CONFIG 0x01
-#define GLIU_SMI 0x02
-#define GLIU_ERROR 0x03
-#define GLIU_PM 0x04
-#define GLIU_DIAG 0x05
-
-/*
- * GLIU SPEC. MSR
- */
-#define GLIU_P2D_BM0 0x20
-#define GLIU_P2D_BM1 0x21
-#define GLIU_P2D_BM2 0x22
-#define GLIU_P2D_BMK0 0x23
-#define GLIU_P2D_BMK1 0x24
-#define GLIU_P2D_BM3 0x25
-#define GLIU_P2D_BM4 0x26
-#define GLIU_COH 0x80
-#define GLIU_PAE 0x81
-#define GLIU_ARB 0x82
-#define GLIU_ASMI 0x83
-#define GLIU_AERR 0x84
-#define GLIU_DEBUG 0x85
-#define GLIU_PHY_CAP 0x86
-#define GLIU_NOUT_RESP 0x87
-#define GLIU_NOUT_WDATA 0x88
-#define GLIU_WHOAMI 0x8B
-#define GLIU_SLV_DIS 0x8C
-#define GLIU_IOD_BM0 0xE0
-#define GLIU_IOD_BM1 0xE1
-#define GLIU_IOD_BM2 0xE2
-#define GLIU_IOD_BM3 0xE3
-#define GLIU_IOD_BM4 0xE4
-#define GLIU_IOD_BM5 0xE5
-#define GLIU_IOD_BM6 0xE6
-#define GLIU_IOD_BM7 0xE7
-#define GLIU_IOD_BM8 0xE8
-#define GLIU_IOD_BM9 0xE9
-#define GLIU_IOD_SC0 0xEA
-#define GLIU_IOD_SC1 0xEB
-#define GLIU_IOD_SC2 0xEC
-#define GLIU_IOD_SC3 0xED
-#define GLIU_IOD_SC4 0xEE
-#define GLIU_IOD_SC5 0xEF
-#define GLIU_IOD_SC6 0xF0
-#define GLIU_IOD_SC7 0xF1
-
-/*
- * SB STANDARD
- */
-#define SB_CAP 0x00
-#define SB_CONFIG 0x01
-#define SB_SMI 0x02
-#define SB_ERROR 0x03
-#define SB_MAR_ERR_EN 0x00000001
-#define SB_TAR_ERR_EN 0x00000002
-#define SB_RSVD_BIT1 0x00000004
-#define SB_EXCEP_ERR_EN 0x00000008
-#define SB_SYSE_ERR_EN 0x00000010
-#define SB_PARE_ERR_EN 0x00000020
-#define SB_TAS_ERR_EN 0x00000040
-#define SB_MAR_ERR_FLAG 0x00010000
-#define SB_TAR_ERR_FLAG 0x00020000
-#define SB_RSVD_BIT2 0x00040000
-#define SB_EXCEP_ERR_FLAG 0x00080000
-#define SB_SYSE_ERR_FLAG 0x00100000
-#define SB_PARE_ERR_FLAG 0x00200000
-#define SB_TAS_ERR_FLAG 0x00400000
-#define SB_PM 0x04
-#define SB_DIAG 0x05
-
-/*
- * SB SPEC.
- */
-#define SB_CTRL 0x10
-#define SB_R0 0x20
-#define SB_R1 0x21
-#define SB_R2 0x22
-#define SB_R3 0x23
-#define SB_R4 0x24
-#define SB_R5 0x25
-#define SB_R6 0x26
-#define SB_R7 0x27
-#define SB_R8 0x28
-#define SB_R9 0x29
-#define SB_R10 0x2A
-#define SB_R11 0x2B
-#define SB_R12 0x2C
-#define SB_R13 0x2D
-#define SB_R14 0x2E
-#define SB_R15 0x2F
-
-/*
- * GLCP STANDARD
- */
-#define GLCP_CAP 0x00
-#define GLCP_CONFIG 0x01
-#define GLCP_SMI 0x02
-#define GLCP_ERROR 0x03
-#define GLCP_PM 0x04
-#define GLCP_DIAG 0x05
-
-/*
- * GLCP SPEC.
- */
-#define GLCP_CLK_DIS_DELAY 0x08
-#define GLCP_PM_CLK_DISABLE 0x09
-#define GLCP_GLB_PM 0x0B
-#define GLCP_DBG_OUT 0x0C
-#define GLCP_RSVD1 0x0D
-#define GLCP_SOFT_COM 0x0E
-#define SOFT_BAR_SMB_FLAG 0x00000001
-#define SOFT_BAR_GPIO_FLAG 0x00000002
-#define SOFT_BAR_MFGPT_FLAG 0x00000004
-#define SOFT_BAR_IRQ_FLAG 0x00000008
-#define SOFT_BAR_PMS_FLAG 0x00000010
-#define SOFT_BAR_ACPI_FLAG 0x00000020
-#define SOFT_BAR_IDE_FLAG 0x00000400
-#define SOFT_BAR_ACC_FLAG 0x00000800
-#define SOFT_BAR_OHCI_FLAG 0x00001000
-#define SOFT_BAR_EHCI_FLAG 0x00002000
-#define GLCP_RSVD2 0x0F
-#define GLCP_CLK_OFF 0x10
-#define GLCP_CLK_ACTIVE 0x11
-#define GLCP_CLK_DISABLE 0x12
-#define GLCP_CLK4ACK 0x13
-#define GLCP_SYS_RST 0x14
-#define GLCP_RSVD3 0x15
-#define GLCP_DBG_CLK_CTRL 0x16
-#define GLCP_CHIP_REV_ID 0x17
-
-/* PIC */
-#define PIC_YSEL_LOW 0x20
-#define PIC_YSEL_LOW_USB_SHIFT 8
-#define PIC_YSEL_LOW_ACC_SHIFT 16
-#define PIC_YSEL_LOW_FLASH_SHIFT 24
-#define PIC_YSEL_HIGH 0x21
-#define PIC_ZSEL_LOW 0x22
-#define PIC_ZSEL_HIGH 0x23
-#define PIC_IRQM_PRIM 0x24
-#define PIC_IRQM_LPC 0x25
-#define PIC_XIRR_STS_LOW 0x26
-#define PIC_XIRR_STS_HIGH 0x27
-#define PCI_SHDW 0x34
-
-/*
- * DIVIL STANDARD
- */
-#define DIVIL_CAP 0x00
-#define DIVIL_CONFIG 0x01
-#define DIVIL_SMI 0x02
-#define DIVIL_ERROR 0x03
-#define DIVIL_PM 0x04
-#define DIVIL_DIAG 0x05
-
-/*
- * DIVIL SPEC.
- */
-#define DIVIL_LBAR_IRQ 0x08
-#define DIVIL_LBAR_KEL 0x09
-#define DIVIL_LBAR_SMB 0x0B
-#define DIVIL_LBAR_GPIO 0x0C
-#define DIVIL_LBAR_MFGPT 0x0D
-#define DIVIL_LBAR_ACPI 0x0E
-#define DIVIL_LBAR_PMS 0x0F
-#define DIVIL_LEG_IO 0x14
-#define DIVIL_BALL_OPTS 0x15
-#define DIVIL_SOFT_IRQ 0x16
-#define DIVIL_SOFT_RESET 0x17
-
-/* MFGPT */
-#define MFGPT_IRQ 0x28
-
-/*
- * IDE STANDARD
- */
-#define IDE_CAP 0x00
-#define IDE_CONFIG 0x01
-#define IDE_SMI 0x02
-#define IDE_ERROR 0x03
-#define IDE_PM 0x04
-#define IDE_DIAG 0x05
-
-/*
- * IDE SPEC.
- */
-#define IDE_IO_BAR 0x08
-#define IDE_CFG 0x10
-#define IDE_DTC 0x12
-#define IDE_CAST 0x13
-#define IDE_ETC 0x14
-#define IDE_INTERNAL_PM 0x15
-
-/*
- * ACC STANDARD
- */
-#define ACC_CAP 0x00
-#define ACC_CONFIG 0x01
-#define ACC_SMI 0x02
-#define ACC_ERROR 0x03
-#define ACC_PM 0x04
-#define ACC_DIAG 0x05
-
-/*
- * USB STANDARD
- */
-#define USB_CAP 0x00
-#define USB_CONFIG 0x01
-#define USB_SMI 0x02
-#define USB_ERROR 0x03
-#define USB_PM 0x04
-#define USB_DIAG 0x05
-
-/*
- * USB SPEC.
- */
-#define USB_OHCI 0x08
-#define USB_EHCI 0x09
-
-/****************** NATIVE ***************************/
-/* GPIO : I/O SPACE; REG : 32BITS */
-#define GPIOL_OUT_VAL 0x00
-#define GPIOL_OUT_EN 0x04
-
-#endif /* _CS5536_H */
+++ /dev/null
-/*
- * cs5536 mfgpt header file
- */
-
-#ifndef _CS5536_MFGPT_H
-#define _CS5536_MFGPT_H
-
-#include <cs5536/cs5536.h>
-#include <cs5536/cs5536_pci.h>
-
-#ifdef CONFIG_CS5536_MFGPT
-extern void setup_mfgpt0_timer(void);
-extern void disable_mfgpt0_counter(void);
-extern void enable_mfgpt0_counter(void);
-#else
-static inline void __maybe_unused setup_mfgpt0_timer(void)
-{
-}
-static inline void __maybe_unused disable_mfgpt0_counter(void)
-{
-}
-static inline void __maybe_unused enable_mfgpt0_counter(void)
-{
-}
-#endif
-
-#define MFGPT_TICK_RATE 14318000
-#define COMPARE ((MFGPT_TICK_RATE + HZ/2) / HZ)
-
-#define MFGPT_BASE mfgpt_base
-#define MFGPT0_CMP2 (MFGPT_BASE + 2)
-#define MFGPT0_CNT (MFGPT_BASE + 4)
-#define MFGPT0_SETUP (MFGPT_BASE + 6)
-
-#endif /*!_CS5536_MFGPT_H */
+++ /dev/null
-/*
- * the definition file of cs5536 Virtual Support Module(VSM).
- * pci configuration space can be accessed through the VSM, so
- * there is no need of the MSR read/write now, except the spec.
- * MSR registers which are not implemented yet.
- *
- * Copyright (C) 2007 Lemote Inc.
- * Author : jlliu, liujl@lemote.com
- */
-
-#ifndef _CS5536_PCI_H
-#define _CS5536_PCI_H
-
-#include <linux/types.h>
-#include <linux/pci_regs.h>
-
-extern void cs5536_pci_conf_write4(int function, int reg, u32 value);
-extern u32 cs5536_pci_conf_read4(int function, int reg);
-
-#define CS5536_ACC_INTR 9
-#define CS5536_IDE_INTR 14
-#define CS5536_USB_INTR 11
-#define CS5536_MFGPT_INTR 5
-#define CS5536_UART1_INTR 4
-#define CS5536_UART2_INTR 3
-
-/************** PCI BUS DEVICE FUNCTION ***************/
-
-/*
- * PCI bus device function
- */
-#define PCI_BUS_CS5536 0
-#define PCI_IDSEL_CS5536 14
-
-/********** STANDARD PCI-2.2 EXPANSION ****************/
-
-/*
- * PCI configuration space
- * we have to virtualize the PCI configure space head, so we should
- * define the necessary IDs and some others.
- */
-
-/* CONFIG of PCI VENDOR ID*/
-#define CFG_PCI_VENDOR_ID(mod_dev_id, sys_vendor_id) \
- (((mod_dev_id) << 16) | (sys_vendor_id))
-
-/* VENDOR ID */
-#define CS5536_VENDOR_ID 0x1022
-
-/* DEVICE ID */
-#define CS5536_ISA_DEVICE_ID 0x2090
-#define CS5536_IDE_DEVICE_ID 0x209a
-#define CS5536_ACC_DEVICE_ID 0x2093
-#define CS5536_OHCI_DEVICE_ID 0x2094
-#define CS5536_EHCI_DEVICE_ID 0x2095
-
-/* CLASS CODE : CLASS SUB-CLASS INTERFACE */
-#define CS5536_ISA_CLASS_CODE 0x060100
-#define CS5536_IDE_CLASS_CODE 0x010180
-#define CS5536_ACC_CLASS_CODE 0x040100
-#define CS5536_OHCI_CLASS_CODE 0x0C0310
-#define CS5536_EHCI_CLASS_CODE 0x0C0320
-
-/* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */
-
-#define CFG_PCI_CACHE_LINE_SIZE(header_type, latency_timer) \
- ((PCI_NONE_BIST << 24) | ((header_type) << 16) \
- | ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE);
-
-#define PCI_NONE_BIST 0x00 /* RO not implemented yet. */
-#define PCI_BRIDGE_HEADER_TYPE 0x80 /* RO */
-#define PCI_NORMAL_HEADER_TYPE 0x00
-#define PCI_NORMAL_LATENCY_TIMER 0x00
-#define PCI_NORMAL_CACHE_LINE_SIZE 0x08 /* RW */
-
-/* BAR */
-#define PCI_BAR0_REG 0x10
-#define PCI_BAR1_REG 0x14
-#define PCI_BAR2_REG 0x18
-#define PCI_BAR3_REG 0x1c
-#define PCI_BAR4_REG 0x20
-#define PCI_BAR5_REG 0x24
-#define PCI_BAR_COUNT 6
-#define PCI_BAR_RANGE_MASK 0xFFFFFFFF
-
-/* CARDBUS CIS POINTER */
-#define PCI_CARDBUS_CIS_POINTER 0x00000000
-
-/* SUBSYSTEM VENDOR ID */
-#define CS5536_SUB_VENDOR_ID CS5536_VENDOR_ID
-
-/* SUBSYSTEM ID */
-#define CS5536_ISA_SUB_ID CS5536_ISA_DEVICE_ID
-#define CS5536_IDE_SUB_ID CS5536_IDE_DEVICE_ID
-#define CS5536_ACC_SUB_ID CS5536_ACC_DEVICE_ID
-#define CS5536_OHCI_SUB_ID CS5536_OHCI_DEVICE_ID
-#define CS5536_EHCI_SUB_ID CS5536_EHCI_DEVICE_ID
-
-/* EXPANSION ROM BAR */
-#define PCI_EXPANSION_ROM_BAR 0x00000000
-
-/* CAPABILITIES POINTER */
-#define PCI_CAPLIST_POINTER 0x00000000
-#define PCI_CAPLIST_USB_POINTER 0x40
-/* INTERRUPT */
-
-#define CFG_PCI_INTERRUPT_LINE(pin, mod_intr) \
- ((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \
- ((pin) << 8) | (mod_intr))
-
-#define PCI_MAX_LATENCY 0x40
-#define PCI_MIN_GRANT 0x00
-#define PCI_DEFAULT_PIN 0x01
-
-/*********** EXPANSION PCI REG ************************/
-
-/*
- * ISA EXPANSION
- */
-#define PCI_UART1_INT_REG 0x50
-#define PCI_UART2_INT_REG 0x54
-#define PCI_ISA_FIXUP_REG 0x58
-
-/*
- * IDE EXPANSION
- */
-#define PCI_IDE_CFG_REG 0x40
-#define CS5536_IDE_FLASH_SIGNATURE 0xDEADBEEF
-#define PCI_IDE_DTC_REG 0x48
-#define PCI_IDE_CAST_REG 0x4C
-#define PCI_IDE_ETC_REG 0x50
-#define PCI_IDE_PM_REG 0x54
-#define PCI_IDE_INT_REG 0x60
-
-/*
- * ACC EXPANSION
- */
-#define PCI_ACC_INT_REG 0x50
-
-/*
- * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI
- */
-#define PCI_OHCI_PM_REG 0x40
-#define PCI_OHCI_INT_REG 0x50
-
-/*
- * EHCI EXPANSION
- */
-#define PCI_EHCI_LEGSMIEN_REG 0x50
-#define PCI_EHCI_LEGSMISTS_REG 0x54
-#define PCI_EHCI_FLADJ_REG 0x60
-
-#endif /* _CS5536_PCI_H_ */
+++ /dev/null
-/*
- * the read/write interfaces for Virtual Support Module(VSM)
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin <wuzhangjin@gmail.com>
- */
-
-#ifndef _CS5536_VSM_H
-#define _CS5536_VSM_H
-
-#include <linux/types.h>
-
-typedef void (*cs5536_pci_vsm_write)(int reg, u32 value);
-typedef u32 (*cs5536_pci_vsm_read)(int reg);
-
-#define DECLARE_CS5536_MODULE(name) \
-extern void pci_##name##_write_reg(int reg, u32 value); \
-extern u32 pci_##name##_read_reg(int reg);
-
-/* ide module */
-DECLARE_CS5536_MODULE(ide)
-/* acc module */
-DECLARE_CS5536_MODULE(acc)
-/* ohci module */
-DECLARE_CS5536_MODULE(ohci)
-/* isa module */
-DECLARE_CS5536_MODULE(isa)
-/* ehci module */
-DECLARE_CS5536_MODULE(ehci)
-
-#endif /* _CS5536_VSM_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, 07 Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- */
-#ifndef __ASM_MACH_LOONGSON_DMA_COHERENCE_H
-#define __ASM_MACH_LOONGSON_DMA_COHERENCE_H
-
-#ifdef CONFIG_SWIOTLB
-#include <linux/swiotlb.h>
-#endif
-
-struct device;
-
-extern dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
-extern phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
- size_t size)
-{
-#ifdef CONFIG_CPU_LOONGSON3
- return phys_to_dma(dev, virt_to_phys(addr));
-#else
- return virt_to_phys(addr) | 0x80000000;
-#endif
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
- struct page *page)
-{
-#ifdef CONFIG_CPU_LOONGSON3
- return phys_to_dma(dev, page_to_phys(page));
-#else
- return page_to_phys(page) | 0x80000000;
-#endif
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
- dma_addr_t dma_addr)
-{
-#if defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_64BIT)
- return dma_to_phys(dev, dma_addr);
-#elif defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
- return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
-#else
- return dma_addr & 0x7fffffff;
-#endif
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
- size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
- /*
- * we fall back to GFP_DMA when the mask isn't all 1s,
- * so we can't guarantee allocations that must be
- * within a tighter range than GFP_DMA..
- */
- if (mask < DMA_BIT_MASK(24))
- return 0;
-
- return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-#ifdef CONFIG_DMA_NONCOHERENT
- return 0;
-#else
- return 1;
-#endif /* CONFIG_DMA_NONCOHERENT */
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-#endif /* __ASM_MACH_LOONGSON_DMA_COHERENCE_H */
+++ /dev/null
-/*
- * Loongson GPIO Support
- *
- * Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com>
- * Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
- * Copyright (c) 2014 Huacai Chen <chenhc@lemote.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __LOONGSON_GPIO_H
-#define __LOONGSON_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-/* The chip can do interrupt
- * but it has not been tested and doc not clear
- */
-static inline int gpio_to_irq(int gpio)
-{
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(int gpio)
-{
- return -EINVAL;
-}
-
-#endif /* __LOONGSON_GPIO_H */
+++ /dev/null
-#ifndef __ASM_MACH_LOONGSON_IRQ_H_
-#define __ASM_MACH_LOONGSON_IRQ_H_
-
-#include <boot_param.h>
-
-#ifdef CONFIG_CPU_LOONGSON3
-
-/* cpu core interrupt numbers */
-#define MIPS_CPU_IRQ_BASE 56
-
-#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 2) /* UART */
-#define LOONGSON_HT1_IRQ (MIPS_CPU_IRQ_BASE + 3) /* HT1 */
-#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* CPU Timer */
-
-#define LOONGSON_HT1_CFG_BASE loongson_sysconf.ht_control_base
-#define LOONGSON_HT1_INT_VECTOR_BASE (LOONGSON_HT1_CFG_BASE + 0x80)
-#define LOONGSON_HT1_INT_EN_BASE (LOONGSON_HT1_CFG_BASE + 0xa0)
-#define LOONGSON_HT1_INT_VECTOR(n) \
- LOONGSON3_REG32(LOONGSON_HT1_INT_VECTOR_BASE, 4 * (n))
-#define LOONGSON_HT1_INTN_EN(n) \
- LOONGSON3_REG32(LOONGSON_HT1_INT_EN_BASE, 4 * (n))
-
-#define LOONGSON_INT_ROUTER_OFFSET 0x1400
-#define LOONGSON_INT_ROUTER_INTEN \
- LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x24)
-#define LOONGSON_INT_ROUTER_INTENSET \
- LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x28)
-#define LOONGSON_INT_ROUTER_INTENCLR \
- LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x2c)
-#define LOONGSON_INT_ROUTER_ENTRY(n) \
- LOONGSON3_REG8(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + n)
-#define LOONGSON_INT_ROUTER_LPC LOONGSON_INT_ROUTER_ENTRY(0x0a)
-#define LOONGSON_INT_ROUTER_HT1(n) LOONGSON_INT_ROUTER_ENTRY(n + 0x18)
-
-#define LOONGSON_INT_COREx_INTy(x, y) (1<<(x) | 1<<(y+4)) /* route to int y of core x */
-
-#endif
-
-extern void fixup_irqs(void);
-extern void loongson3_ipi_interrupt(struct pt_regs *regs);
-
-#include_next <irq.h>
-#endif /* __ASM_MACH_LOONGSON_IRQ_H_ */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 Embedded Alley Solutions, Inc
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2009 Jiajie Chen (chenjiajie@cse.buaa.edu.cn)
- * Copyright (C) 2012 Huacai Chen (chenhc@lemote.com)
- */
-#ifndef __ASM_MACH_LOONGSON_KERNEL_ENTRY_H
-#define __ASM_MACH_LOONGSON_KERNEL_ENTRY_H
-
-/*
- * Override macros used in arch/mips/kernel/head.S.
- */
- .macro kernel_entry_setup
-#ifdef CONFIG_CPU_LOONGSON3
- .set push
- .set mips64
- /* Set LPA on LOONGSON3 config3 */
- mfc0 t0, $16, 3
- or t0, (0x1 << 7)
- mtc0 t0, $16, 3
- /* Set ELPA on LOONGSON3 pagegrain */
- li t0, (0x1 << 29)
- mtc0 t0, $5, 1
- _ehb
- .set pop
-#endif
- .endm
-
-/*
- * Do SMP slave processor setup.
- */
- .macro smp_slave_setup
-#ifdef CONFIG_CPU_LOONGSON3
- .set push
- .set mips64
- /* Set LPA on LOONGSON3 config3 */
- mfc0 t0, $16, 3
- or t0, (0x1 << 7)
- mtc0 t0, $16, 3
- /* Set ELPA on LOONGSON3 pagegrain */
- li t0, (0x1 << 29)
- mtc0 t0, $5, 1
- _ehb
- .set pop
-#endif
- .endm
-
-#endif /* __ASM_MACH_LOONGSON_KERNEL_ENTRY_H */
+++ /dev/null
-/*
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin <wuzhangjin@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_MACH_LOONGSON_LOONGSON_H
-#define __ASM_MACH_LOONGSON_LOONGSON_H
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kconfig.h>
-#include <boot_param.h>
-
-/* loongson internal northbridge initialization */
-extern void bonito_irq_init(void);
-
-/* machine-specific reboot/halt operation */
-extern void mach_prepare_reboot(void);
-extern void mach_prepare_shutdown(void);
-
-/* environment arguments from bootloader */
-extern u32 cpu_clock_freq;
-extern u32 memsize, highmemsize;
-extern struct plat_smp_ops loongson3_smp_ops;
-
-/* loongson-specific command line, env and memory initialization */
-extern void __init prom_init_memory(void);
-extern void __init prom_init_cmdline(void);
-extern void __init prom_init_machtype(void);
-extern void __init prom_init_env(void);
-#ifdef CONFIG_LOONGSON_UART_BASE
-extern unsigned long _loongson_uart_base[], loongson_uart_base[];
-extern void prom_init_loongson_uart_base(void);
-#endif
-
-static inline void prom_init_uart_base(void)
-{
-#ifdef CONFIG_LOONGSON_UART_BASE
- prom_init_loongson_uart_base();
-#endif
-}
-
-/* irq operation functions */
-extern void bonito_irqdispatch(void);
-extern void __init bonito_irq_init(void);
-extern void __init mach_init_irq(void);
-extern void mach_irq_dispatch(unsigned int pending);
-extern int mach_i8259_irq(void);
-
-/* We need this in some places... */
-#define delay() ({ \
- int x; \
- for (x = 0; x < 100000; x++) \
- __asm__ __volatile__(""); \
-})
-
-#define LOONGSON_REG(x) \
- (*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
-
-#define LOONGSON3_REG8(base, x) \
- (*(volatile u8 *)((char *)TO_UNCAC(base) + (x)))
-
-#define LOONGSON3_REG32(base, x) \
- (*(volatile u32 *)((char *)TO_UNCAC(base) + (x)))
-
-#define LOONGSON_IRQ_BASE 32
-#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
-
-#include <linux/interrupt.h>
-static inline void do_perfcnt_IRQ(void)
-{
-#if IS_ENABLED(CONFIG_OPROFILE)
- do_IRQ(LOONGSON2_PERFCNT_IRQ);
-#endif
-}
-
-#define LOONGSON_FLASH_BASE 0x1c000000
-#define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */
-#define LOONGSON_FLASH_TOP (LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1)
-
-#define LOONGSON_LIO0_BASE 0x1e000000
-#define LOONGSON_LIO0_SIZE 0x01C00000 /* 28M */
-#define LOONGSON_LIO0_TOP (LOONGSON_LIO0_BASE+LOONGSON_LIO0_SIZE-1)
-
-#define LOONGSON_BOOT_BASE 0x1fc00000
-#define LOONGSON_BOOT_SIZE 0x00100000 /* 1M */
-#define LOONGSON_BOOT_TOP (LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1)
-#define LOONGSON_REG_BASE 0x1fe00000
-#define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
-#define LOONGSON_REG_TOP (LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1)
-/* Loongson-3 specific registers */
-#define LOONGSON3_REG_BASE 0x3ff00000
-#define LOONGSON3_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
-#define LOONGSON3_REG_TOP (LOONGSON3_REG_BASE+LOONGSON3_REG_SIZE-1)
-
-#define LOONGSON_LIO1_BASE 0x1ff00000
-#define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */
-#define LOONGSON_LIO1_TOP (LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1)
-
-#define LOONGSON_PCILO0_BASE 0x10000000
-#define LOONGSON_PCILO1_BASE 0x14000000
-#define LOONGSON_PCILO2_BASE 0x18000000
-#define LOONGSON_PCILO_BASE LOONGSON_PCILO0_BASE
-#define LOONGSON_PCILO_SIZE 0x0c000000 /* 64M * 3 */
-#define LOONGSON_PCILO_TOP (LOONGSON_PCILO0_BASE+LOONGSON_PCILO_SIZE-1)
-
-#define LOONGSON_PCICFG_BASE 0x1fe80000
-#define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */
-#define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1)
-
-#if defined(CONFIG_HT_PCI)
-#define LOONGSON_PCIIO_BASE loongson_sysconf.pci_io_base
-#else
-#define LOONGSON_PCIIO_BASE 0x1fd00000
-#endif
-
-#define LOONGSON_PCIIO_SIZE 0x00100000 /* 1M */
-#define LOONGSON_PCIIO_TOP (LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1)
-
-/* Loongson Register Bases */
-
-#define LOONGSON_PCICONFIGBASE 0x00
-#define LOONGSON_REGBASE 0x100
-
-/* PCI Configuration Registers */
-
-#define LOONGSON_PCI_REG(x) LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x))
-#define LOONGSON_PCIDID LOONGSON_PCI_REG(0x00)
-#define LOONGSON_PCICMD LOONGSON_PCI_REG(0x04)
-#define LOONGSON_PCICLASS LOONGSON_PCI_REG(0x08)
-#define LOONGSON_PCILTIMER LOONGSON_PCI_REG(0x0c)
-#define LOONGSON_PCIBASE0 LOONGSON_PCI_REG(0x10)
-#define LOONGSON_PCIBASE1 LOONGSON_PCI_REG(0x14)
-#define LOONGSON_PCIBASE2 LOONGSON_PCI_REG(0x18)
-#define LOONGSON_PCIBASE3 LOONGSON_PCI_REG(0x1c)
-#define LOONGSON_PCIBASE4 LOONGSON_PCI_REG(0x20)
-#define LOONGSON_PCIEXPRBASE LOONGSON_PCI_REG(0x30)
-#define LOONGSON_PCIINT LOONGSON_PCI_REG(0x3c)
-
-#define LOONGSON_PCI_ISR4C LOONGSON_PCI_REG(0x4c)
-
-#define LOONGSON_PCICMD_PERR_CLR 0x80000000
-#define LOONGSON_PCICMD_SERR_CLR 0x40000000
-#define LOONGSON_PCICMD_MABORT_CLR 0x20000000
-#define LOONGSON_PCICMD_MTABORT_CLR 0x10000000
-#define LOONGSON_PCICMD_TABORT_CLR 0x08000000
-#define LOONGSON_PCICMD_MPERR_CLR 0x01000000
-#define LOONGSON_PCICMD_PERRRESPEN 0x00000040
-#define LOONGSON_PCICMD_ASTEPEN 0x00000080
-#define LOONGSON_PCICMD_SERREN 0x00000100
-#define LOONGSON_PCILTIMER_BUSLATENCY 0x0000ff00
-#define LOONGSON_PCILTIMER_BUSLATENCY_SHIFT 8
-
-/* Loongson h/w Configuration */
-
-#define LOONGSON_GENCFG_OFFSET 0x4
-#define LOONGSON_GENCFG LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET)
-
-#define LOONGSON_GENCFG_DEBUGMODE 0x00000001
-#define LOONGSON_GENCFG_SNOOPEN 0x00000002
-#define LOONGSON_GENCFG_CPUSELFRESET 0x00000004
-
-#define LOONGSON_GENCFG_FORCE_IRQA 0x00000008
-#define LOONGSON_GENCFG_IRQA_ISOUT 0x00000010
-#define LOONGSON_GENCFG_IRQA_FROM_INT1 0x00000020
-#define LOONGSON_GENCFG_BYTESWAP 0x00000040
-
-#define LOONGSON_GENCFG_UNCACHED 0x00000080
-#define LOONGSON_GENCFG_PREFETCHEN 0x00000100
-#define LOONGSON_GENCFG_WBEHINDEN 0x00000200
-#define LOONGSON_GENCFG_CACHEALG 0x00000c00
-#define LOONGSON_GENCFG_CACHEALG_SHIFT 10
-#define LOONGSON_GENCFG_PCIQUEUE 0x00001000
-#define LOONGSON_GENCFG_CACHESTOP 0x00002000
-#define LOONGSON_GENCFG_MSTRBYTESWAP 0x00004000
-#define LOONGSON_GENCFG_BUSERREN 0x00008000
-#define LOONGSON_GENCFG_NORETRYTIMEOUT 0x00010000
-#define LOONGSON_GENCFG_SHORTCOPYTIMEOUT 0x00020000
-
-/* PCI address map control */
-
-#define LOONGSON_PCIMAP LOONGSON_REG(LOONGSON_REGBASE + 0x10)
-#define LOONGSON_PCIMEMBASECFG LOONGSON_REG(LOONGSON_REGBASE + 0x14)
-#define LOONGSON_PCIMAP_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x18)
-
-/* GPIO Regs - r/w */
-
-#define LOONGSON_GPIODATA LOONGSON_REG(LOONGSON_REGBASE + 0x1c)
-#define LOONGSON_GPIOIE LOONGSON_REG(LOONGSON_REGBASE + 0x20)
-
-/* ICU Configuration Regs - r/w */
-
-#define LOONGSON_INTEDGE LOONGSON_REG(LOONGSON_REGBASE + 0x24)
-#define LOONGSON_INTSTEER LOONGSON_REG(LOONGSON_REGBASE + 0x28)
-#define LOONGSON_INTPOL LOONGSON_REG(LOONGSON_REGBASE + 0x2c)
-
-/* ICU Enable Regs - IntEn & IntISR are r/o. */
-
-#define LOONGSON_INTENSET LOONGSON_REG(LOONGSON_REGBASE + 0x30)
-#define LOONGSON_INTENCLR LOONGSON_REG(LOONGSON_REGBASE + 0x34)
-#define LOONGSON_INTEN LOONGSON_REG(LOONGSON_REGBASE + 0x38)
-#define LOONGSON_INTISR LOONGSON_REG(LOONGSON_REGBASE + 0x3c)
-
-/* ICU */
-#define LOONGSON_ICU_MBOXES 0x0000000f
-#define LOONGSON_ICU_MBOXES_SHIFT 0
-#define LOONGSON_ICU_DMARDY 0x00000010
-#define LOONGSON_ICU_DMAEMPTY 0x00000020
-#define LOONGSON_ICU_COPYRDY 0x00000040
-#define LOONGSON_ICU_COPYEMPTY 0x00000080
-#define LOONGSON_ICU_COPYERR 0x00000100
-#define LOONGSON_ICU_PCIIRQ 0x00000200
-#define LOONGSON_ICU_MASTERERR 0x00000400
-#define LOONGSON_ICU_SYSTEMERR 0x00000800
-#define LOONGSON_ICU_DRAMPERR 0x00001000
-#define LOONGSON_ICU_RETRYERR 0x00002000
-#define LOONGSON_ICU_GPIOS 0x01ff0000
-#define LOONGSON_ICU_GPIOS_SHIFT 16
-#define LOONGSON_ICU_GPINS 0x7e000000
-#define LOONGSON_ICU_GPINS_SHIFT 25
-#define LOONGSON_ICU_MBOX(N) (1<<(LOONGSON_ICU_MBOXES_SHIFT+(N)))
-#define LOONGSON_ICU_GPIO(N) (1<<(LOONGSON_ICU_GPIOS_SHIFT+(N)))
-#define LOONGSON_ICU_GPIN(N) (1<<(LOONGSON_ICU_GPINS_SHIFT+(N)))
-
-/* PCI prefetch window base & mask */
-
-#define LOONGSON_MEM_WIN_BASE_L LOONGSON_REG(LOONGSON_REGBASE + 0x40)
-#define LOONGSON_MEM_WIN_BASE_H LOONGSON_REG(LOONGSON_REGBASE + 0x44)
-#define LOONGSON_MEM_WIN_MASK_L LOONGSON_REG(LOONGSON_REGBASE + 0x48)
-#define LOONGSON_MEM_WIN_MASK_H LOONGSON_REG(LOONGSON_REGBASE + 0x4c)
-
-/* PCI_Hit*_Sel_* */
-
-#define LOONGSON_PCI_HIT0_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x50)
-#define LOONGSON_PCI_HIT0_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x54)
-#define LOONGSON_PCI_HIT1_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x58)
-#define LOONGSON_PCI_HIT1_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x5c)
-#define LOONGSON_PCI_HIT2_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x60)
-#define LOONGSON_PCI_HIT2_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x64)
-
-/* PXArb Config & Status */
-
-#define LOONGSON_PXARB_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x68)
-#define LOONGSON_PXARB_STATUS LOONGSON_REG(LOONGSON_REGBASE + 0x6c)
-
-#define MAX_PACKAGES 4
-
-/* Chip Config registor of each physical cpu package, PRid >= Loongson-2F */
-extern u64 loongson_chipcfg[MAX_PACKAGES];
-#define LOONGSON_CHIPCFG(id) (*(volatile u32 *)(loongson_chipcfg[id]))
-
-/* Chip Temperature registor of each physical cpu package, PRid >= Loongson-3A */
-extern u64 loongson_chiptemp[MAX_PACKAGES];
-#define LOONGSON_CHIPTEMP(id) (*(volatile u32 *)(loongson_chiptemp[id]))
-
-/* Freq Control register of each physical cpu package, PRid >= Loongson-3B */
-extern u64 loongson_freqctrl[MAX_PACKAGES];
-#define LOONGSON_FREQCTRL(id) (*(volatile u32 *)(loongson_freqctrl[id]))
-
-/* pcimap */
-
-#define LOONGSON_PCIMAP_PCIMAP_LO0 0x0000003f
-#define LOONGSON_PCIMAP_PCIMAP_LO0_SHIFT 0
-#define LOONGSON_PCIMAP_PCIMAP_LO1 0x00000fc0
-#define LOONGSON_PCIMAP_PCIMAP_LO1_SHIFT 6
-#define LOONGSON_PCIMAP_PCIMAP_LO2 0x0003f000
-#define LOONGSON_PCIMAP_PCIMAP_LO2_SHIFT 12
-#define LOONGSON_PCIMAP_PCIMAP_2 0x00040000
-#define LOONGSON_PCIMAP_WIN(WIN, ADDR) \
- ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
-
-#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ
-#include <linux/cpufreq.h>
-extern struct cpufreq_frequency_table loongson2_clockmod_table[];
-#endif
-
-/*
- * address windows configuration module
- *
- * loongson2e do not have this module
- */
-#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
-
-/* address window config module base address */
-#define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul
-#define LOONGSON_ADDRWINCFG_SIZE 0x180
-
-extern unsigned long _loongson_addrwincfg_base;
-#define LOONGSON_ADDRWINCFG(offset) \
- (*(volatile u64 *)(_loongson_addrwincfg_base + (offset)))
-
-#define CPU_WIN0_BASE LOONGSON_ADDRWINCFG(0x00)
-#define CPU_WIN1_BASE LOONGSON_ADDRWINCFG(0x08)
-#define CPU_WIN2_BASE LOONGSON_ADDRWINCFG(0x10)
-#define CPU_WIN3_BASE LOONGSON_ADDRWINCFG(0x18)
-
-#define CPU_WIN0_MASK LOONGSON_ADDRWINCFG(0x20)
-#define CPU_WIN1_MASK LOONGSON_ADDRWINCFG(0x28)
-#define CPU_WIN2_MASK LOONGSON_ADDRWINCFG(0x30)
-#define CPU_WIN3_MASK LOONGSON_ADDRWINCFG(0x38)
-
-#define CPU_WIN0_MMAP LOONGSON_ADDRWINCFG(0x40)
-#define CPU_WIN1_MMAP LOONGSON_ADDRWINCFG(0x48)
-#define CPU_WIN2_MMAP LOONGSON_ADDRWINCFG(0x50)
-#define CPU_WIN3_MMAP LOONGSON_ADDRWINCFG(0x58)
-
-#define PCIDMA_WIN0_BASE LOONGSON_ADDRWINCFG(0x60)
-#define PCIDMA_WIN1_BASE LOONGSON_ADDRWINCFG(0x68)
-#define PCIDMA_WIN2_BASE LOONGSON_ADDRWINCFG(0x70)
-#define PCIDMA_WIN3_BASE LOONGSON_ADDRWINCFG(0x78)
-
-#define PCIDMA_WIN0_MASK LOONGSON_ADDRWINCFG(0x80)
-#define PCIDMA_WIN1_MASK LOONGSON_ADDRWINCFG(0x88)
-#define PCIDMA_WIN2_MASK LOONGSON_ADDRWINCFG(0x90)
-#define PCIDMA_WIN3_MASK LOONGSON_ADDRWINCFG(0x98)
-
-#define PCIDMA_WIN0_MMAP LOONGSON_ADDRWINCFG(0xa0)
-#define PCIDMA_WIN1_MMAP LOONGSON_ADDRWINCFG(0xa8)
-#define PCIDMA_WIN2_MMAP LOONGSON_ADDRWINCFG(0xb0)
-#define PCIDMA_WIN3_MMAP LOONGSON_ADDRWINCFG(0xb8)
-
-#define ADDRWIN_WIN0 0
-#define ADDRWIN_WIN1 1
-#define ADDRWIN_WIN2 2
-#define ADDRWIN_WIN3 3
-
-#define ADDRWIN_MAP_DST_DDR 0
-#define ADDRWIN_MAP_DST_PCI 1
-#define ADDRWIN_MAP_DST_LIO 1
-
-/*
- * s: CPU, PCIDMA
- * d: DDR, PCI, LIO
- * win: 0, 1, 2, 3
- * src: map source
- * dst: map destination
- * size: ~mask + 1
- */
-#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
- s##_WIN##w##_BASE = (src); \
- s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \
- s##_WIN##w##_MASK = ~(size-1); \
-} while (0)
-
-#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \
- LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size)
-#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \
- LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size)
-#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \
- LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size)
-
-#endif /* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */
-
-#endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
+++ /dev/null
-#ifndef __LOONGSON_HWMON_H_
-#define __LOONGSON_HWMON_H_
-
-#include <linux/types.h>
-
-#define MIN_TEMP 0
-#define MAX_TEMP 255
-#define NOT_VALID_TEMP 999
-
-typedef int (*get_temp_fun)(int);
-extern int loongson3_cpu_temp(int);
-
-/* 0:Max speed, 1:Manual, 2:Auto */
-enum fan_control_mode {
- FAN_FULL_MODE = 0,
- FAN_MANUAL_MODE = 1,
- FAN_AUTO_MODE = 2,
- FAN_MODE_END
-};
-
-struct temp_range {
- u8 low;
- u8 high;
- u8 level;
-};
-
-#define CONSTANT_SPEED_POLICY 0 /* at constent speed */
-#define STEP_SPEED_POLICY 1 /* use up/down arrays to describe policy */
-#define KERNEL_HELPER_POLICY 2 /* kernel as a helper to fan control */
-
-#define MAX_STEP_NUM 16
-#define MAX_FAN_LEVEL 255
-
-/* loongson_fan_policy works when fan work at FAN_AUTO_MODE */
-struct loongson_fan_policy {
- u8 type;
-
- /* percent only used when type is CONSTANT_SPEED_POLICY */
- u8 percent;
-
- /* period between two check. (Unit: S) */
- u8 adjust_period;
-
- /* fan adjust usually depend on a temprature input */
- get_temp_fun depend_temp;
-
- /* up_step/down_step used when type is STEP_SPEED_POLICY */
- u8 up_step_num;
- u8 down_step_num;
- struct temp_range up_step[MAX_STEP_NUM];
- struct temp_range down_step[MAX_STEP_NUM];
- struct delayed_work work;
-};
-
-#endif /* __LOONGSON_HWMON_H_*/
+++ /dev/null
-/*
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin <wuzhangjin@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_MACH_LOONGSON_MACHINE_H
-#define __ASM_MACH_LOONGSON_MACHINE_H
-
-#ifdef CONFIG_LEMOTE_FULOONG2E
-
-#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E
-
-#endif
-
-/* use fuloong2f as the default machine of LEMOTE_MACH2F */
-#ifdef CONFIG_LEMOTE_MACH2F
-
-#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2F
-
-#endif
-
-#ifdef CONFIG_LOONGSON_MACH3X
-
-#define LOONGSON_MACHTYPE MACH_LOONGSON_GENERIC
-
-#endif /* CONFIG_LOONGSON_MACH3X */
-
-#endif /* __ASM_MACH_LOONGSON_MACHINE_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
- *
- * RTC routines for PC style attached Dallas chip.
- */
-#ifndef __ASM_MACH_LOONGSON_MC146818RTC_H
-#define __ASM_MACH_LOONGSON_MC146818RTC_H
-
-#include <linux/io.h>
-
-#define RTC_PORT(x) (0x70 + (x))
-#define RTC_IRQ 8
-
-static inline unsigned char CMOS_READ(unsigned long addr)
-{
- outb_p(addr, RTC_PORT(0));
- return inb_p(RTC_PORT(1));
-}
-
-static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
-{
- outb_p(addr, RTC_PORT(0));
- outb_p(data, RTC_PORT(1));
-}
-
-#define RTC_ALWAYS_BCD 0
-
-#ifndef mc146818_decode_year
-#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
-#endif
-
-#endif /* __ASM_MACH_LOONGSON_MC146818RTC_H */
+++ /dev/null
-/*
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin <wuzhangjin@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_MACH_LOONGSON_MEM_H
-#define __ASM_MACH_LOONGSON_MEM_H
-
-/*
- * high memory space
- *
- * in loongson2e, starts from 512M
- * in loongson2f, starts from 2G 256M
- */
-#ifdef CONFIG_CPU_LOONGSON2E
-#define LOONGSON_HIGHMEM_START 0x20000000
-#else
-#define LOONGSON_HIGHMEM_START 0x90000000
-#endif
-
-/*
- * the peripheral registers(MMIO):
- *
- * On the Lemote Loongson 2e system, reside between 0x1000:0000 and 0x2000:0000.
- * On the Lemote Loongson 2f system, reside between 0x1000:0000 and 0x8000:0000.
- */
-
-#define LOONGSON_MMIO_MEM_START 0x10000000
-
-#ifdef CONFIG_CPU_LOONGSON2E
-#define LOONGSON_MMIO_MEM_END 0x20000000
-#else
-#define LOONGSON_MMIO_MEM_END 0x80000000
-#endif
-
-#endif /* __ASM_MACH_LOONGSON_MEM_H */
+++ /dev/null
-/*
- * Copyright (C) 2010 Loongson Inc. & Lemote Inc. &
- * Insititute of Computing Technology
- * Author: Xiang Gao, gaoxiang@ict.ac.cn
- * Huacai Chen, chenhc@lemote.com
- * Xiaofu Meng, Shuangshuang Zhang
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_MACH_MMZONE_H
-#define _ASM_MACH_MMZONE_H
-
-#include <boot_param.h>
-#define NODE_ADDRSPACE_SHIFT 44
-#define NODE0_ADDRSPACE_OFFSET 0x000000000000UL
-#define NODE1_ADDRSPACE_OFFSET 0x100000000000UL
-#define NODE2_ADDRSPACE_OFFSET 0x200000000000UL
-#define NODE3_ADDRSPACE_OFFSET 0x300000000000UL
-
-#define pa_to_nid(addr) (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT)
-
-#define LEVELS_PER_SLICE 128
-
-struct slice_data {
- unsigned long irq_enable_mask[2];
- int level_to_irq[LEVELS_PER_SLICE];
-};
-
-struct hub_data {
- cpumask_t h_cpus;
- unsigned long slice_map;
- unsigned long irq_alloc_mask[2];
- struct slice_data slice[2];
-};
-
-struct node_data {
- struct pglist_data pglist;
- struct hub_data hub;
- cpumask_t cpumask;
-};
-
-extern struct node_data *__node_data[];
-
-#define NODE_DATA(n) (&__node_data[(n)]->pglist)
-#define hub_data(n) (&__node_data[(n)]->hub)
-
-extern void setup_zero_pages(void);
-extern void __init prom_init_numa_memory(void);
-
-#endif /* _ASM_MACH_MMZONE_H */
+++ /dev/null
-/*
- * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
- * Copyright (c) 2009 Wu Zhangjin <wuzhangjin@gmail.com>
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General
- * Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_MACH_LOONGSON_PCI_H_
-#define __ASM_MACH_LOONGSON_PCI_H_
-
-extern struct pci_ops loongson_pci_ops;
-
-/* this is an offset from mips_io_port_base */
-#define LOONGSON_PCI_IO_START 0x00004000UL
-
-#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
-
-/*
- * we use address window2 to map cpu address space to pci space
- * window2: cpu [1G, 2G] -> pci [1G, 2G]
- * why not use window 0 & 1? because they are used by cpu when booting.
- * window0: cpu [0, 256M] -> ddr [0, 256M]
- * window1: cpu [256M, 512M] -> pci [256M, 512M]
- */
-
-/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */
-#define LOONGSON_CPU_MEM_SRC 0x40000000ul /* 1G */
-#define LOONGSON_PCI_MEM_DST LOONGSON_CPU_MEM_SRC
-
-#define LOONGSON_PCI_MEM_START LOONGSON_PCI_MEM_DST
-#define LOONGSON_PCI_MEM_END (0x80000000ul-1) /* 2G */
-
-#define MMAP_CPUTOPCI_SIZE (LOONGSON_PCI_MEM_END - \
- LOONGSON_PCI_MEM_START + 1)
-
-#else /* loongson2f/32bit & loongson2e */
-
-/* this pci memory space is mapped by pcimap in pci.c */
-#ifdef CONFIG_CPU_LOONGSON3
-#define LOONGSON_PCI_MEM_START 0x40000000UL
-#define LOONGSON_PCI_MEM_END 0x7effffffUL
-#else
-#define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE
-#define LOONGSON_PCI_MEM_END (LOONGSON_PCILO1_BASE + 0x04000000 * 2)
-#endif
-/* this is an offset from mips_io_port_base */
-#define LOONGSON_PCI_IO_START 0x00004000UL
-
-#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
-
-#endif /* !__ASM_MACH_LOONGSON_PCI_H_ */
+++ /dev/null
-#ifndef __ASM_MACH_LOONGSON_SPACES_H_
-#define __ASM_MACH_LOONGSON_SPACES_H_
-
-#if defined(CONFIG_64BIT)
-#define CAC_BASE _AC(0x9800000000000000, UL)
-#endif /* CONFIG_64BIT */
-
-#include <asm/mach-generic/spaces.h>
-#endif
+++ /dev/null
-#ifndef _ASM_MACH_TOPOLOGY_H
-#define _ASM_MACH_TOPOLOGY_H
-
-#ifdef CONFIG_NUMA
-
-#define cpu_to_node(cpu) (cpu_logical_map(cpu) >> 2)
-#define parent_node(node) (node)
-#define cpumask_of_node(node) (&__node_data[(node)]->cpumask)
-
-struct pci_bus;
-extern int pcibus_to_node(struct pci_bus *);
-
-#define cpumask_of_pcibus(bus) (cpu_online_mask)
-
-extern unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
-
-#define node_distance(from, to) (__node_distances[(from)][(to)])
-
-#endif
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_MACH_TOPOLOGY_H */
+++ /dev/null
-#ifndef __ASM_MACH_LOONGSON_WORKAROUNDS_H_
-#define __ASM_MACH_LOONGSON_WORKAROUNDS_H_
-
-#define WORKAROUND_CPUFREQ 0x00000001
-#define WORKAROUND_CPUHOTPLUG 0x00000002
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 CPUFreq platform support.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-
-#ifndef __ASM_MACH_LOONGSON1_CPUFREQ_H
-#define __ASM_MACH_LOONGSON1_CPUFREQ_H
-
-struct plat_ls1x_cpufreq {
- const char *clk_name; /* CPU clk */
- const char *osc_clk_name; /* OSC clk */
- unsigned int max_freq; /* in kHz */
- unsigned int min_freq; /* in kHz */
-};
-
-#endif /* __ASM_MACH_LOONGSON1_CPUFREQ_H */
+++ /dev/null
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * IRQ mappings for Loongson 1
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-
-#ifndef __ASM_MACH_LOONGSON1_IRQ_H
-#define __ASM_MACH_LOONGSON1_IRQ_H
-
-/*
- * CPU core Interrupt Numbers
- */
-#define MIPS_CPU_IRQ_BASE 0
-#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
-
-#define SOFTINT0_IRQ MIPS_CPU_IRQ(0)
-#define SOFTINT1_IRQ MIPS_CPU_IRQ(1)
-#define INT0_IRQ MIPS_CPU_IRQ(2)
-#define INT1_IRQ MIPS_CPU_IRQ(3)
-#define INT2_IRQ MIPS_CPU_IRQ(4)
-#define INT3_IRQ MIPS_CPU_IRQ(5)
-#define INT4_IRQ MIPS_CPU_IRQ(6)
-#define TIMER_IRQ MIPS_CPU_IRQ(7) /* cpu timer */
-
-#define MIPS_CPU_IRQS (MIPS_CPU_IRQ(7) + 1 - MIPS_CPU_IRQ_BASE)
-
-/*
- * INT0~3 Interrupt Numbers
- */
-#define LS1X_IRQ_BASE MIPS_CPU_IRQS
-#define LS1X_IRQ(n, x) (LS1X_IRQ_BASE + (n << 5) + (x))
-
-#define LS1X_UART0_IRQ LS1X_IRQ(0, 2)
-#define LS1X_UART1_IRQ LS1X_IRQ(0, 3)
-#define LS1X_UART2_IRQ LS1X_IRQ(0, 4)
-#define LS1X_UART3_IRQ LS1X_IRQ(0, 5)
-#define LS1X_CAN0_IRQ LS1X_IRQ(0, 6)
-#define LS1X_CAN1_IRQ LS1X_IRQ(0, 7)
-#define LS1X_SPI0_IRQ LS1X_IRQ(0, 8)
-#define LS1X_SPI1_IRQ LS1X_IRQ(0, 9)
-#define LS1X_AC97_IRQ LS1X_IRQ(0, 10)
-#define LS1X_DMA0_IRQ LS1X_IRQ(0, 13)
-#define LS1X_DMA1_IRQ LS1X_IRQ(0, 14)
-#define LS1X_DMA2_IRQ LS1X_IRQ(0, 15)
-#define LS1X_PWM0_IRQ LS1X_IRQ(0, 17)
-#define LS1X_PWM1_IRQ LS1X_IRQ(0, 18)
-#define LS1X_PWM2_IRQ LS1X_IRQ(0, 19)
-#define LS1X_PWM3_IRQ LS1X_IRQ(0, 20)
-#define LS1X_RTC_INT0_IRQ LS1X_IRQ(0, 21)
-#define LS1X_RTC_INT1_IRQ LS1X_IRQ(0, 22)
-#define LS1X_RTC_INT2_IRQ LS1X_IRQ(0, 23)
-#define LS1X_TOY_INT0_IRQ LS1X_IRQ(0, 24)
-#define LS1X_TOY_INT1_IRQ LS1X_IRQ(0, 25)
-#define LS1X_TOY_INT2_IRQ LS1X_IRQ(0, 26)
-#define LS1X_RTC_TICK_IRQ LS1X_IRQ(0, 27)
-#define LS1X_TOY_TICK_IRQ LS1X_IRQ(0, 28)
-
-#define LS1X_EHCI_IRQ LS1X_IRQ(1, 0)
-#define LS1X_OHCI_IRQ LS1X_IRQ(1, 1)
-#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 2)
-#define LS1X_GMAC1_IRQ LS1X_IRQ(1, 3)
-
-#define LS1X_IRQS (LS1X_IRQ(4, 31) + 1 - LS1X_IRQ_BASE)
-
-#define NR_IRQS (MIPS_CPU_IRQS + LS1X_IRQS)
-
-#endif /* __ASM_MACH_LOONGSON1_IRQ_H */
+++ /dev/null
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Register mappings for Loongson 1
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-
-#ifndef __ASM_MACH_LOONGSON1_LOONGSON1_H
-#define __ASM_MACH_LOONGSON1_LOONGSON1_H
-
-#define DEFAULT_MEMSIZE 256 /* If no memsize provided */
-
-/* Loongson 1 Register Bases */
-#define LS1X_MUX_BASE 0x1fd00420
-#define LS1X_INTC_BASE 0x1fd01040
-#define LS1X_EHCI_BASE 0x1fe00000
-#define LS1X_OHCI_BASE 0x1fe08000
-#define LS1X_GMAC0_BASE 0x1fe10000
-#define LS1X_GMAC1_BASE 0x1fe20000
-
-#define LS1X_UART0_BASE 0x1fe40000
-#define LS1X_UART1_BASE 0x1fe44000
-#define LS1X_UART2_BASE 0x1fe48000
-#define LS1X_UART3_BASE 0x1fe4c000
-#define LS1X_CAN0_BASE 0x1fe50000
-#define LS1X_CAN1_BASE 0x1fe54000
-#define LS1X_I2C0_BASE 0x1fe58000
-#define LS1X_I2C1_BASE 0x1fe68000
-#define LS1X_I2C2_BASE 0x1fe70000
-#define LS1X_PWM0_BASE 0x1fe5c000
-#define LS1X_PWM1_BASE 0x1fe5c010
-#define LS1X_PWM2_BASE 0x1fe5c020
-#define LS1X_PWM3_BASE 0x1fe5c030
-#define LS1X_WDT_BASE 0x1fe5c060
-#define LS1X_RTC_BASE 0x1fe64000
-#define LS1X_AC97_BASE 0x1fe74000
-#define LS1X_NAND_BASE 0x1fe78000
-#define LS1X_CLK_BASE 0x1fe78030
-
-#include <regs-clk.h>
-#include <regs-mux.h>
-#include <regs-pwm.h>
-#include <regs-wdt.h>
-
-#endif /* __ASM_MACH_LOONGSON1_LOONGSON1_H */
+++ /dev/null
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-
-#ifndef __ASM_MACH_LOONGSON1_PLATFORM_H
-#define __ASM_MACH_LOONGSON1_PLATFORM_H
-
-#include <linux/platform_device.h>
-
-extern struct platform_device ls1x_uart_pdev;
-extern struct platform_device ls1x_cpufreq_pdev;
-extern struct platform_device ls1x_eth0_pdev;
-extern struct platform_device ls1x_eth1_pdev;
-extern struct platform_device ls1x_ehci_pdev;
-extern struct platform_device ls1x_rtc_pdev;
-
-extern void __init ls1x_clk_init(void);
-extern void __init ls1x_serial_setup(struct platform_device *pdev);
-
-#endif /* __ASM_MACH_LOONGSON1_PLATFORM_H */
+++ /dev/null
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_MACH_LOONGSON1_PROM_H
-#define __ASM_MACH_LOONGSON1_PROM_H
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-/* environment arguments from bootloader */
-extern unsigned long memsize, highmemsize;
-
-/* loongson-specific command line, env and memory initialization */
-extern char *prom_getenv(char *name);
-extern void __init prom_init_cmdline(void);
-
-#endif /* __ASM_MACH_LOONGSON1_PROM_H */
+++ /dev/null
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 Clock Register Definitions.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_MACH_LOONGSON1_REGS_CLK_H
-#define __ASM_MACH_LOONGSON1_REGS_CLK_H
-
-#define LS1X_CLK_REG(x) \
- ((void __iomem *)KSEG1ADDR(LS1X_CLK_BASE + (x)))
-
-#define LS1X_CLK_PLL_FREQ LS1X_CLK_REG(0x0)
-#define LS1X_CLK_PLL_DIV LS1X_CLK_REG(0x4)
-
-/* Clock PLL Divisor Register Bits */
-#define DIV_DC_EN (0x1 << 31)
-#define DIV_DC_RST (0x1 << 30)
-#define DIV_CPU_EN (0x1 << 25)
-#define DIV_CPU_RST (0x1 << 24)
-#define DIV_DDR_EN (0x1 << 19)
-#define DIV_DDR_RST (0x1 << 18)
-#define RST_DC_EN (0x1 << 5)
-#define RST_DC (0x1 << 4)
-#define RST_DDR_EN (0x1 << 3)
-#define RST_DDR (0x1 << 2)
-#define RST_CPU_EN (0x1 << 1)
-#define RST_CPU 0x1
-
-#define DIV_DC_SHIFT 26
-#define DIV_CPU_SHIFT 20
-#define DIV_DDR_SHIFT 14
-
-#define DIV_DC_WIDTH 4
-#define DIV_CPU_WIDTH 4
-#define DIV_DDR_WIDTH 4
-
-#define BYPASS_DC_SHIFT 12
-#define BYPASS_DDR_SHIFT 10
-#define BYPASS_CPU_SHIFT 8
-
-#define BYPASS_DC_WIDTH 1
-#define BYPASS_DDR_WIDTH 1
-#define BYPASS_CPU_WIDTH 1
-
-#endif /* __ASM_MACH_LOONGSON1_REGS_CLK_H */
+++ /dev/null
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 MUX Register Definitions.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_MACH_LOONGSON1_REGS_MUX_H
-#define __ASM_MACH_LOONGSON1_REGS_MUX_H
-
-#define LS1X_MUX_REG(x) \
- ((void __iomem *)KSEG1ADDR(LS1X_MUX_BASE + (x)))
-
-#define LS1X_MUX_CTRL0 LS1X_MUX_REG(0x0)
-#define LS1X_MUX_CTRL1 LS1X_MUX_REG(0x4)
-
-/* MUX CTRL0 Register Bits */
-#define UART0_USE_PWM23 (0x1 << 28)
-#define UART0_USE_PWM01 (0x1 << 27)
-#define UART1_USE_LCD0_5_6_11 (0x1 << 26)
-#define I2C2_USE_CAN1 (0x1 << 25)
-#define I2C1_USE_CAN0 (0x1 << 24)
-#define NAND3_USE_UART5 (0x1 << 23)
-#define NAND3_USE_UART4 (0x1 << 22)
-#define NAND3_USE_UART1_DAT (0x1 << 21)
-#define NAND3_USE_UART1_CTS (0x1 << 20)
-#define NAND3_USE_PWM23 (0x1 << 19)
-#define NAND3_USE_PWM01 (0x1 << 18)
-#define NAND2_USE_UART5 (0x1 << 17)
-#define NAND2_USE_UART4 (0x1 << 16)
-#define NAND2_USE_UART1_DAT (0x1 << 15)
-#define NAND2_USE_UART1_CTS (0x1 << 14)
-#define NAND2_USE_PWM23 (0x1 << 13)
-#define NAND2_USE_PWM01 (0x1 << 12)
-#define NAND1_USE_UART5 (0x1 << 11)
-#define NAND1_USE_UART4 (0x1 << 10)
-#define NAND1_USE_UART1_DAT (0x1 << 9)
-#define NAND1_USE_UART1_CTS (0x1 << 8)
-#define NAND1_USE_PWM23 (0x1 << 7)
-#define NAND1_USE_PWM01 (0x1 << 6)
-#define GMAC1_USE_UART1 (0x1 << 4)
-#define GMAC1_USE_UART0 (0x1 << 3)
-#define LCD_USE_UART0_DAT (0x1 << 2)
-#define LCD_USE_UART15 (0x1 << 1)
-#define LCD_USE_UART0 0x1
-
-/* MUX CTRL1 Register Bits */
-#define USB_RESET (0x1 << 31)
-#define SPI1_CS_USE_PWM01 (0x1 << 24)
-#define SPI1_USE_CAN (0x1 << 23)
-#define DISABLE_DDR_CONFSPACE (0x1 << 20)
-#define DDR32TO16EN (0x1 << 16)
-#define GMAC1_SHUT (0x1 << 13)
-#define GMAC0_SHUT (0x1 << 12)
-#define USB_SHUT (0x1 << 11)
-#define UART1_3_USE_CAN1 (0x1 << 5)
-#define UART1_2_USE_CAN0 (0x1 << 4)
-#define GMAC1_USE_TXCLK (0x1 << 3)
-#define GMAC0_USE_TXCLK (0x1 << 2)
-#define GMAC1_USE_PWM23 (0x1 << 1)
-#define GMAC0_USE_PWM01 0x1
-
-#endif /* __ASM_MACH_LOONGSON1_REGS_MUX_H */
+++ /dev/null
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 PWM Register Definitions.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_MACH_LOONGSON1_REGS_PWM_H
-#define __ASM_MACH_LOONGSON1_REGS_PWM_H
-
-/* Loongson 1 PWM Timer Register Definitions */
-#define PWM_CNT 0x0
-#define PWM_HRC 0x4
-#define PWM_LRC 0x8
-#define PWM_CTRL 0xc
-
-/* PWM Control Register Bits */
-#define CNT_RST (0x1 << 7)
-#define INT_SR (0x1 << 6)
-#define INT_EN (0x1 << 5)
-#define PWM_SINGLE (0x1 << 4)
-#define PWM_OE (0x1 << 3)
-#define CNT_EN 0x1
-
-#endif /* __ASM_MACH_LOONGSON1_REGS_PWM_H */
+++ /dev/null
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 Watchdog Register Definitions.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_MACH_LOONGSON1_REGS_WDT_H
-#define __ASM_MACH_LOONGSON1_REGS_WDT_H
-
-#define WDT_EN 0x0
-#define WDT_TIMER 0x4
-#define WDT_SET 0x8
-
-#endif /* __ASM_MACH_LOONGSON1_REGS_WDT_H */
--- /dev/null
+/*
+ * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Loongson 1 CPUFreq platform support.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON32_CPUFREQ_H
+#define __ASM_MACH_LOONGSON32_CPUFREQ_H
+
+struct plat_ls1x_cpufreq {
+ const char *clk_name; /* CPU clk */
+ const char *osc_clk_name; /* OSC clk */
+ unsigned int max_freq; /* in kHz */
+ unsigned int min_freq; /* in kHz */
+};
+
+#endif /* __ASM_MACH_LOONGSON32_CPUFREQ_H */
--- /dev/null
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * IRQ mappings for Loongson 1
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON32_IRQ_H
+#define __ASM_MACH_LOONGSON32_IRQ_H
+
+/*
+ * CPU core Interrupt Numbers
+ */
+#define MIPS_CPU_IRQ_BASE 0
+#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
+
+#define SOFTINT0_IRQ MIPS_CPU_IRQ(0)
+#define SOFTINT1_IRQ MIPS_CPU_IRQ(1)
+#define INT0_IRQ MIPS_CPU_IRQ(2)
+#define INT1_IRQ MIPS_CPU_IRQ(3)
+#define INT2_IRQ MIPS_CPU_IRQ(4)
+#define INT3_IRQ MIPS_CPU_IRQ(5)
+#define INT4_IRQ MIPS_CPU_IRQ(6)
+#define TIMER_IRQ MIPS_CPU_IRQ(7) /* cpu timer */
+
+#define MIPS_CPU_IRQS (MIPS_CPU_IRQ(7) + 1 - MIPS_CPU_IRQ_BASE)
+
+/*
+ * INT0~3 Interrupt Numbers
+ */
+#define LS1X_IRQ_BASE MIPS_CPU_IRQS
+#define LS1X_IRQ(n, x) (LS1X_IRQ_BASE + (n << 5) + (x))
+
+#define LS1X_UART0_IRQ LS1X_IRQ(0, 2)
+#define LS1X_UART1_IRQ LS1X_IRQ(0, 3)
+#define LS1X_UART2_IRQ LS1X_IRQ(0, 4)
+#define LS1X_UART3_IRQ LS1X_IRQ(0, 5)
+#define LS1X_CAN0_IRQ LS1X_IRQ(0, 6)
+#define LS1X_CAN1_IRQ LS1X_IRQ(0, 7)
+#define LS1X_SPI0_IRQ LS1X_IRQ(0, 8)
+#define LS1X_SPI1_IRQ LS1X_IRQ(0, 9)
+#define LS1X_AC97_IRQ LS1X_IRQ(0, 10)
+#define LS1X_DMA0_IRQ LS1X_IRQ(0, 13)
+#define LS1X_DMA1_IRQ LS1X_IRQ(0, 14)
+#define LS1X_DMA2_IRQ LS1X_IRQ(0, 15)
+#define LS1X_PWM0_IRQ LS1X_IRQ(0, 17)
+#define LS1X_PWM1_IRQ LS1X_IRQ(0, 18)
+#define LS1X_PWM2_IRQ LS1X_IRQ(0, 19)
+#define LS1X_PWM3_IRQ LS1X_IRQ(0, 20)
+#define LS1X_RTC_INT0_IRQ LS1X_IRQ(0, 21)
+#define LS1X_RTC_INT1_IRQ LS1X_IRQ(0, 22)
+#define LS1X_RTC_INT2_IRQ LS1X_IRQ(0, 23)
+#define LS1X_TOY_INT0_IRQ LS1X_IRQ(0, 24)
+#define LS1X_TOY_INT1_IRQ LS1X_IRQ(0, 25)
+#define LS1X_TOY_INT2_IRQ LS1X_IRQ(0, 26)
+#define LS1X_RTC_TICK_IRQ LS1X_IRQ(0, 27)
+#define LS1X_TOY_TICK_IRQ LS1X_IRQ(0, 28)
+
+#define LS1X_EHCI_IRQ LS1X_IRQ(1, 0)
+#define LS1X_OHCI_IRQ LS1X_IRQ(1, 1)
+#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 2)
+#define LS1X_GMAC1_IRQ LS1X_IRQ(1, 3)
+
+#define LS1X_IRQS (LS1X_IRQ(4, 31) + 1 - LS1X_IRQ_BASE)
+
+#define NR_IRQS (MIPS_CPU_IRQS + LS1X_IRQS)
+
+#endif /* __ASM_MACH_LOONGSON32_IRQ_H */
--- /dev/null
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Register mappings for Loongson 1
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON32_LOONGSON1_H
+#define __ASM_MACH_LOONGSON32_LOONGSON1_H
+
+#define DEFAULT_MEMSIZE 256 /* If no memsize provided */
+
+/* Loongson 1 Register Bases */
+#define LS1X_MUX_BASE 0x1fd00420
+#define LS1X_INTC_BASE 0x1fd01040
+#define LS1X_EHCI_BASE 0x1fe00000
+#define LS1X_OHCI_BASE 0x1fe08000
+#define LS1X_GMAC0_BASE 0x1fe10000
+#define LS1X_GMAC1_BASE 0x1fe20000
+
+#define LS1X_UART0_BASE 0x1fe40000
+#define LS1X_UART1_BASE 0x1fe44000
+#define LS1X_UART2_BASE 0x1fe48000
+#define LS1X_UART3_BASE 0x1fe4c000
+#define LS1X_CAN0_BASE 0x1fe50000
+#define LS1X_CAN1_BASE 0x1fe54000
+#define LS1X_I2C0_BASE 0x1fe58000
+#define LS1X_I2C1_BASE 0x1fe68000
+#define LS1X_I2C2_BASE 0x1fe70000
+#define LS1X_PWM0_BASE 0x1fe5c000
+#define LS1X_PWM1_BASE 0x1fe5c010
+#define LS1X_PWM2_BASE 0x1fe5c020
+#define LS1X_PWM3_BASE 0x1fe5c030
+#define LS1X_WDT_BASE 0x1fe5c060
+#define LS1X_RTC_BASE 0x1fe64000
+#define LS1X_AC97_BASE 0x1fe74000
+#define LS1X_NAND_BASE 0x1fe78000
+#define LS1X_CLK_BASE 0x1fe78030
+
+#include <regs-clk.h>
+#include <regs-mux.h>
+#include <regs-pwm.h>
+#include <regs-wdt.h>
+
+#endif /* __ASM_MACH_LOONGSON32_LOONGSON1_H */
--- /dev/null
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON32_PLATFORM_H
+#define __ASM_MACH_LOONGSON32_PLATFORM_H
+
+#include <linux/platform_device.h>
+
+extern struct platform_device ls1x_uart_pdev;
+extern struct platform_device ls1x_cpufreq_pdev;
+extern struct platform_device ls1x_eth0_pdev;
+extern struct platform_device ls1x_eth1_pdev;
+extern struct platform_device ls1x_ehci_pdev;
+extern struct platform_device ls1x_rtc_pdev;
+
+extern void __init ls1x_clk_init(void);
+extern void __init ls1x_serial_setup(struct platform_device *pdev);
+
+#endif /* __ASM_MACH_LOONGSON32_PLATFORM_H */
--- /dev/null
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON32_PROM_H
+#define __ASM_MACH_LOONGSON32_PROM_H
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+/* environment arguments from bootloader */
+extern unsigned long memsize, highmemsize;
+
+/* loongson-specific command line, env and memory initialization */
+extern char *prom_getenv(char *name);
+extern void __init prom_init_cmdline(void);
+
+#endif /* __ASM_MACH_LOONGSON32_PROM_H */
--- /dev/null
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Loongson 1 Clock Register Definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON32_REGS_CLK_H
+#define __ASM_MACH_LOONGSON32_REGS_CLK_H
+
+#define LS1X_CLK_REG(x) \
+ ((void __iomem *)KSEG1ADDR(LS1X_CLK_BASE + (x)))
+
+#define LS1X_CLK_PLL_FREQ LS1X_CLK_REG(0x0)
+#define LS1X_CLK_PLL_DIV LS1X_CLK_REG(0x4)
+
+/* Clock PLL Divisor Register Bits */
+#define DIV_DC_EN (0x1 << 31)
+#define DIV_DC_RST (0x1 << 30)
+#define DIV_CPU_EN (0x1 << 25)
+#define DIV_CPU_RST (0x1 << 24)
+#define DIV_DDR_EN (0x1 << 19)
+#define DIV_DDR_RST (0x1 << 18)
+#define RST_DC_EN (0x1 << 5)
+#define RST_DC (0x1 << 4)
+#define RST_DDR_EN (0x1 << 3)
+#define RST_DDR (0x1 << 2)
+#define RST_CPU_EN (0x1 << 1)
+#define RST_CPU 0x1
+
+#define DIV_DC_SHIFT 26
+#define DIV_CPU_SHIFT 20
+#define DIV_DDR_SHIFT 14
+
+#define DIV_DC_WIDTH 4
+#define DIV_CPU_WIDTH 4
+#define DIV_DDR_WIDTH 4
+
+#define BYPASS_DC_SHIFT 12
+#define BYPASS_DDR_SHIFT 10
+#define BYPASS_CPU_SHIFT 8
+
+#define BYPASS_DC_WIDTH 1
+#define BYPASS_DDR_WIDTH 1
+#define BYPASS_CPU_WIDTH 1
+
+#endif /* __ASM_MACH_LOONGSON32_REGS_CLK_H */
--- /dev/null
+/*
+ * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Loongson 1 MUX Register Definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON32_REGS_MUX_H
+#define __ASM_MACH_LOONGSON32_REGS_MUX_H
+
+#define LS1X_MUX_REG(x) \
+ ((void __iomem *)KSEG1ADDR(LS1X_MUX_BASE + (x)))
+
+#define LS1X_MUX_CTRL0 LS1X_MUX_REG(0x0)
+#define LS1X_MUX_CTRL1 LS1X_MUX_REG(0x4)
+
+/* MUX CTRL0 Register Bits */
+#define UART0_USE_PWM23 (0x1 << 28)
+#define UART0_USE_PWM01 (0x1 << 27)
+#define UART1_USE_LCD0_5_6_11 (0x1 << 26)
+#define I2C2_USE_CAN1 (0x1 << 25)
+#define I2C1_USE_CAN0 (0x1 << 24)
+#define NAND3_USE_UART5 (0x1 << 23)
+#define NAND3_USE_UART4 (0x1 << 22)
+#define NAND3_USE_UART1_DAT (0x1 << 21)
+#define NAND3_USE_UART1_CTS (0x1 << 20)
+#define NAND3_USE_PWM23 (0x1 << 19)
+#define NAND3_USE_PWM01 (0x1 << 18)
+#define NAND2_USE_UART5 (0x1 << 17)
+#define NAND2_USE_UART4 (0x1 << 16)
+#define NAND2_USE_UART1_DAT (0x1 << 15)
+#define NAND2_USE_UART1_CTS (0x1 << 14)
+#define NAND2_USE_PWM23 (0x1 << 13)
+#define NAND2_USE_PWM01 (0x1 << 12)
+#define NAND1_USE_UART5 (0x1 << 11)
+#define NAND1_USE_UART4 (0x1 << 10)
+#define NAND1_USE_UART1_DAT (0x1 << 9)
+#define NAND1_USE_UART1_CTS (0x1 << 8)
+#define NAND1_USE_PWM23 (0x1 << 7)
+#define NAND1_USE_PWM01 (0x1 << 6)
+#define GMAC1_USE_UART1 (0x1 << 4)
+#define GMAC1_USE_UART0 (0x1 << 3)
+#define LCD_USE_UART0_DAT (0x1 << 2)
+#define LCD_USE_UART15 (0x1 << 1)
+#define LCD_USE_UART0 0x1
+
+/* MUX CTRL1 Register Bits */
+#define USB_RESET (0x1 << 31)
+#define SPI1_CS_USE_PWM01 (0x1 << 24)
+#define SPI1_USE_CAN (0x1 << 23)
+#define DISABLE_DDR_CONFSPACE (0x1 << 20)
+#define DDR32TO16EN (0x1 << 16)
+#define GMAC1_SHUT (0x1 << 13)
+#define GMAC0_SHUT (0x1 << 12)
+#define USB_SHUT (0x1 << 11)
+#define UART1_3_USE_CAN1 (0x1 << 5)
+#define UART1_2_USE_CAN0 (0x1 << 4)
+#define GMAC1_USE_TXCLK (0x1 << 3)
+#define GMAC0_USE_TXCLK (0x1 << 2)
+#define GMAC1_USE_PWM23 (0x1 << 1)
+#define GMAC0_USE_PWM01 0x1
+
+#endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */
--- /dev/null
+/*
+ * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Loongson 1 PWM Register Definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON32_REGS_PWM_H
+#define __ASM_MACH_LOONGSON32_REGS_PWM_H
+
+/* Loongson 1 PWM Timer Register Definitions */
+#define PWM_CNT 0x0
+#define PWM_HRC 0x4
+#define PWM_LRC 0x8
+#define PWM_CTRL 0xc
+
+/* PWM Control Register Bits */
+#define CNT_RST (0x1 << 7)
+#define INT_SR (0x1 << 6)
+#define INT_EN (0x1 << 5)
+#define PWM_SINGLE (0x1 << 4)
+#define PWM_OE (0x1 << 3)
+#define CNT_EN 0x1
+
+#endif /* __ASM_MACH_LOONGSON32_REGS_PWM_H */
--- /dev/null
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Loongson 1 Watchdog Register Definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON32_REGS_WDT_H
+#define __ASM_MACH_LOONGSON32_REGS_WDT_H
+
+#define WDT_EN 0x0
+#define WDT_TIMER 0x4
+#define WDT_SET 0x8
+
+#endif /* __ASM_MACH_LOONGSON32_REGS_WDT_H */
--- /dev/null
+#ifndef __ASM_MACH_LOONGSON64_BOOT_PARAM_H_
+#define __ASM_MACH_LOONGSON64_BOOT_PARAM_H_
+
+#define SYSTEM_RAM_LOW 1
+#define SYSTEM_RAM_HIGH 2
+#define MEM_RESERVED 3
+#define PCI_IO 4
+#define PCI_MEM 5
+#define LOONGSON_CFG_REG 6
+#define VIDEO_ROM 7
+#define ADAPTER_ROM 8
+#define ACPI_TABLE 9
+#define SMBIOS_TABLE 10
+#define MAX_MEMORY_TYPE 11
+
+#define LOONGSON3_BOOT_MEM_MAP_MAX 128
+struct efi_memory_map_loongson {
+ u16 vers; /* version of efi_memory_map */
+ u32 nr_map; /* number of memory_maps */
+ u32 mem_freq; /* memory frequence */
+ struct mem_map {
+ u32 node_id; /* node_id which memory attached to */
+ u32 mem_type; /* system memory, pci memory, pci io, etc. */
+ u64 mem_start; /* memory map start address */
+ u32 mem_size; /* each memory_map size, not the total size */
+ } map[LOONGSON3_BOOT_MEM_MAP_MAX];
+} __packed;
+
+enum loongson_cpu_type {
+ Loongson_2E = 0,
+ Loongson_2F = 1,
+ Loongson_3A = 2,
+ Loongson_3B = 3,
+ Loongson_1A = 4,
+ Loongson_1B = 5
+};
+
+/*
+ * Capability and feature descriptor structure for MIPS CPU
+ */
+struct efi_cpuinfo_loongson {
+ u16 vers; /* version of efi_cpuinfo_loongson */
+ u32 processor_id; /* PRID, e.g. 6305, 6306 */
+ u32 cputype; /* Loongson_3A/3B, etc. */
+ u32 total_node; /* num of total numa nodes */
+ u16 cpu_startup_core_id; /* Boot core id */
+ u16 reserved_cores_mask;
+ u32 cpu_clock_freq; /* cpu_clock */
+ u32 nr_cpus;
+} __packed;
+
+#define MAX_UARTS 64
+struct uart_device {
+ u32 iotype; /* see include/linux/serial_core.h */
+ u32 uartclk;
+ u32 int_offset;
+ u64 uart_base;
+} __packed;
+
+#define MAX_SENSORS 64
+#define SENSOR_TEMPER 0x00000001
+#define SENSOR_VOLTAGE 0x00000002
+#define SENSOR_FAN 0x00000004
+struct sensor_device {
+ char name[32]; /* a formal name */
+ char label[64]; /* a flexible description */
+ u32 type; /* SENSOR_* */
+ u32 id; /* instance id of a sensor-class */
+ u32 fan_policy; /* see loongson_hwmon.h */
+ u32 fan_percent;/* only for constant speed policy */
+ u64 base_addr; /* base address of device registers */
+} __packed;
+
+struct system_loongson {
+ u16 vers; /* version of system_loongson */
+ u32 ccnuma_smp; /* 0: no numa; 1: has numa */
+ u32 sing_double_channel; /* 1:single; 2:double */
+ u32 nr_uarts;
+ struct uart_device uarts[MAX_UARTS];
+ u32 nr_sensors;
+ struct sensor_device sensors[MAX_SENSORS];
+ char has_ec;
+ char ec_name[32];
+ u64 ec_base_addr;
+ char has_tcm;
+ char tcm_name[32];
+ u64 tcm_base_addr;
+ u64 workarounds; /* see workarounds.h */
+} __packed;
+
+struct irq_source_routing_table {
+ u16 vers;
+ u16 size;
+ u16 rtr_bus;
+ u16 rtr_devfn;
+ u32 vendor;
+ u32 device;
+ u32 PIC_type; /* conform use HT or PCI to route to CPU-PIC */
+ u64 ht_int_bit; /* 3A: 1<<24; 3B: 1<<16 */
+ u64 ht_enable; /* irqs used in this PIC */
+ u32 node_id; /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */
+ u64 pci_mem_start_addr;
+ u64 pci_mem_end_addr;
+ u64 pci_io_start_addr;
+ u64 pci_io_end_addr;
+ u64 pci_config_addr;
+ u32 dma_mask_bits;
+} __packed;
+
+struct interface_info {
+ u16 vers; /* version of the specificition */
+ u16 size;
+ u8 flag;
+ char description[64];
+} __packed;
+
+#define MAX_RESOURCE_NUMBER 128
+struct resource_loongson {
+ u64 start; /* resource start address */
+ u64 end; /* resource end address */
+ char name[64];
+ u32 flags;
+};
+
+struct archdev_data {}; /* arch specific additions */
+
+struct board_devices {
+ char name[64]; /* hold the device name */
+ u32 num_resources; /* number of device_resource */
+ /* for each device's resource */
+ struct resource_loongson resource[MAX_RESOURCE_NUMBER];
+ /* arch specific additions */
+ struct archdev_data archdata;
+};
+
+struct loongson_special_attribute {
+ u16 vers; /* version of this special */
+ char special_name[64]; /* special_atribute_name */
+ u32 loongson_special_type; /* type of special device */
+ /* for each device's resource */
+ struct resource_loongson resource[MAX_RESOURCE_NUMBER];
+};
+
+struct loongson_params {
+ u64 memory_offset; /* efi_memory_map_loongson struct offset */
+ u64 cpu_offset; /* efi_cpuinfo_loongson struct offset */
+ u64 system_offset; /* system_loongson struct offset */
+ u64 irq_offset; /* irq_source_routing_table struct offset */
+ u64 interface_offset; /* interface_info struct offset */
+ u64 special_offset; /* loongson_special_attribute struct offset */
+ u64 boarddev_table_offset; /* board_devices offset */
+};
+
+struct smbios_tables {
+ u16 vers; /* version of smbios */
+ u64 vga_bios; /* vga_bios address */
+ struct loongson_params lp;
+};
+
+struct efi_reset_system_t {
+ u64 ResetCold;
+ u64 ResetWarm;
+ u64 ResetType;
+ u64 Shutdown;
+ u64 DoSuspend; /* NULL if not support */
+};
+
+struct efi_loongson {
+ u64 mps; /* MPS table */
+ u64 acpi; /* ACPI table (IA64 ext 0.71) */
+ u64 acpi20; /* ACPI table (ACPI 2.0) */
+ struct smbios_tables smbios; /* SM BIOS table */
+ u64 sal_systab; /* SAL system table */
+ u64 boot_info; /* boot info table */
+};
+
+struct boot_params {
+ struct efi_loongson efi;
+ struct efi_reset_system_t reset_system;
+};
+
+struct loongson_system_configuration {
+ u32 nr_cpus;
+ u32 nr_nodes;
+ int cores_per_node;
+ int cores_per_package;
+ u16 boot_cpu_id;
+ u16 reserved_cpus_mask;
+ enum loongson_cpu_type cputype;
+ u64 ht_control_base;
+ u64 pci_mem_start_addr;
+ u64 pci_mem_end_addr;
+ u64 pci_io_base;
+ u64 restart_addr;
+ u64 poweroff_addr;
+ u64 suspend_addr;
+ u64 vgabios_addr;
+ u32 dma_mask_bits;
+ char ecname[32];
+ u32 nr_uarts;
+ struct uart_device uarts[MAX_UARTS];
+ u32 nr_sensors;
+ struct sensor_device sensors[MAX_SENSORS];
+ u64 workarounds;
+};
+
+extern struct efi_memory_map_loongson *loongson_memmap;
+extern struct loongson_system_configuration loongson_sysconf;
+
+#endif
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wu Zhangjin <wuzhangjin@gmail.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ * arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ * arch/mips/kernel/proc.c(show_cpuinfo),
+ * loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_scache_line_size() 32
+
+
+#define cpu_has_32fpr 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_4kex 1
+#define cpu_has_64bits 1
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_counter 1
+#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000)
+#define cpu_has_divec 0
+#define cpu_has_dsp 0
+#define cpu_has_dsp2 0
+#define cpu_has_ejtag 0
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_inclusive_pcaches 1
+#define cpu_has_llsc 1
+#define cpu_has_mcheck 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips16 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips3d 0
+#define cpu_has_mips64r2 0
+#define cpu_has_mipsmt 0
+#define cpu_has_prefetch 0
+#define cpu_has_smartmips 0
+#define cpu_has_tlb 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_userlocal 0
+#define cpu_has_vce 0
+#define cpu_has_veic 0
+#define cpu_has_vint 0
+#define cpu_has_vtag_icache 0
+#define cpu_has_watch 1
+#define cpu_has_local_ebase 0
+
+#define cpu_has_wsbh IS_ENABLED(CONFIG_CPU_LOONGSON3)
+
+#endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */
--- /dev/null
+/*
+ * The header file of cs5536 south bridge.
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu <liujl@lemote.com>
+ */
+
+#ifndef _CS5536_H
+#define _CS5536_H
+
+#include <linux/types.h>
+
+extern void _rdmsr(u32 msr, u32 *hi, u32 *lo);
+extern void _wrmsr(u32 msr, u32 hi, u32 lo);
+
+/*
+ * MSR module base
+ */
+#define CS5536_SB_MSR_BASE (0x00000000)
+#define CS5536_GLIU_MSR_BASE (0x10000000)
+#define CS5536_ILLEGAL_MSR_BASE (0x20000000)
+#define CS5536_USB_MSR_BASE (0x40000000)
+#define CS5536_IDE_MSR_BASE (0x60000000)
+#define CS5536_DIVIL_MSR_BASE (0x80000000)
+#define CS5536_ACC_MSR_BASE (0xa0000000)
+#define CS5536_UNUSED_MSR_BASE (0xc0000000)
+#define CS5536_GLCP_MSR_BASE (0xe0000000)
+
+#define SB_MSR_REG(offset) (CS5536_SB_MSR_BASE | (offset))
+#define GLIU_MSR_REG(offset) (CS5536_GLIU_MSR_BASE | (offset))
+#define ILLEGAL_MSR_REG(offset) (CS5536_ILLEGAL_MSR_BASE | (offset))
+#define USB_MSR_REG(offset) (CS5536_USB_MSR_BASE | (offset))
+#define IDE_MSR_REG(offset) (CS5536_IDE_MSR_BASE | (offset))
+#define DIVIL_MSR_REG(offset) (CS5536_DIVIL_MSR_BASE | (offset))
+#define ACC_MSR_REG(offset) (CS5536_ACC_MSR_BASE | (offset))
+#define UNUSED_MSR_REG(offset) (CS5536_UNUSED_MSR_BASE | (offset))
+#define GLCP_MSR_REG(offset) (CS5536_GLCP_MSR_BASE | (offset))
+
+/*
+ * BAR SPACE OF VIRTUAL PCI :
+ * range for pci probe use, length is the actual size.
+ */
+/* IO space for all DIVIL modules */
+#define CS5536_IRQ_RANGE 0xffffffe0 /* USERD FOR PCI PROBE */
+#define CS5536_IRQ_LENGTH 0x20 /* THE REGS ACTUAL LENGTH */
+#define CS5536_SMB_RANGE 0xfffffff8
+#define CS5536_SMB_LENGTH 0x08
+#define CS5536_GPIO_RANGE 0xffffff00
+#define CS5536_GPIO_LENGTH 0x100
+#define CS5536_MFGPT_RANGE 0xffffffc0
+#define CS5536_MFGPT_LENGTH 0x40
+#define CS5536_ACPI_RANGE 0xffffffe0
+#define CS5536_ACPI_LENGTH 0x20
+#define CS5536_PMS_RANGE 0xffffff80
+#define CS5536_PMS_LENGTH 0x80
+/* IO space for IDE */
+#define CS5536_IDE_RANGE 0xfffffff0
+#define CS5536_IDE_LENGTH 0x10
+/* IO space for ACC */
+#define CS5536_ACC_RANGE 0xffffff80
+#define CS5536_ACC_LENGTH 0x80
+/* MEM space for ALL USB modules */
+#define CS5536_OHCI_RANGE 0xfffff000
+#define CS5536_OHCI_LENGTH 0x1000
+#define CS5536_EHCI_RANGE 0xfffff000
+#define CS5536_EHCI_LENGTH 0x1000
+
+/*
+ * PCI MSR ACCESS
+ */
+#define PCI_MSR_CTRL 0xF0
+#define PCI_MSR_ADDR 0xF4
+#define PCI_MSR_DATA_LO 0xF8
+#define PCI_MSR_DATA_HI 0xFC
+
+/**************** MSR *****************************/
+
+/*
+ * GLIU STANDARD MSR
+ */
+#define GLIU_CAP 0x00
+#define GLIU_CONFIG 0x01
+#define GLIU_SMI 0x02
+#define GLIU_ERROR 0x03
+#define GLIU_PM 0x04
+#define GLIU_DIAG 0x05
+
+/*
+ * GLIU SPEC. MSR
+ */
+#define GLIU_P2D_BM0 0x20
+#define GLIU_P2D_BM1 0x21
+#define GLIU_P2D_BM2 0x22
+#define GLIU_P2D_BMK0 0x23
+#define GLIU_P2D_BMK1 0x24
+#define GLIU_P2D_BM3 0x25
+#define GLIU_P2D_BM4 0x26
+#define GLIU_COH 0x80
+#define GLIU_PAE 0x81
+#define GLIU_ARB 0x82
+#define GLIU_ASMI 0x83
+#define GLIU_AERR 0x84
+#define GLIU_DEBUG 0x85
+#define GLIU_PHY_CAP 0x86
+#define GLIU_NOUT_RESP 0x87
+#define GLIU_NOUT_WDATA 0x88
+#define GLIU_WHOAMI 0x8B
+#define GLIU_SLV_DIS 0x8C
+#define GLIU_IOD_BM0 0xE0
+#define GLIU_IOD_BM1 0xE1
+#define GLIU_IOD_BM2 0xE2
+#define GLIU_IOD_BM3 0xE3
+#define GLIU_IOD_BM4 0xE4
+#define GLIU_IOD_BM5 0xE5
+#define GLIU_IOD_BM6 0xE6
+#define GLIU_IOD_BM7 0xE7
+#define GLIU_IOD_BM8 0xE8
+#define GLIU_IOD_BM9 0xE9
+#define GLIU_IOD_SC0 0xEA
+#define GLIU_IOD_SC1 0xEB
+#define GLIU_IOD_SC2 0xEC
+#define GLIU_IOD_SC3 0xED
+#define GLIU_IOD_SC4 0xEE
+#define GLIU_IOD_SC5 0xEF
+#define GLIU_IOD_SC6 0xF0
+#define GLIU_IOD_SC7 0xF1
+
+/*
+ * SB STANDARD
+ */
+#define SB_CAP 0x00
+#define SB_CONFIG 0x01
+#define SB_SMI 0x02
+#define SB_ERROR 0x03
+#define SB_MAR_ERR_EN 0x00000001
+#define SB_TAR_ERR_EN 0x00000002
+#define SB_RSVD_BIT1 0x00000004
+#define SB_EXCEP_ERR_EN 0x00000008
+#define SB_SYSE_ERR_EN 0x00000010
+#define SB_PARE_ERR_EN 0x00000020
+#define SB_TAS_ERR_EN 0x00000040
+#define SB_MAR_ERR_FLAG 0x00010000
+#define SB_TAR_ERR_FLAG 0x00020000
+#define SB_RSVD_BIT2 0x00040000
+#define SB_EXCEP_ERR_FLAG 0x00080000
+#define SB_SYSE_ERR_FLAG 0x00100000
+#define SB_PARE_ERR_FLAG 0x00200000
+#define SB_TAS_ERR_FLAG 0x00400000
+#define SB_PM 0x04
+#define SB_DIAG 0x05
+
+/*
+ * SB SPEC.
+ */
+#define SB_CTRL 0x10
+#define SB_R0 0x20
+#define SB_R1 0x21
+#define SB_R2 0x22
+#define SB_R3 0x23
+#define SB_R4 0x24
+#define SB_R5 0x25
+#define SB_R6 0x26
+#define SB_R7 0x27
+#define SB_R8 0x28
+#define SB_R9 0x29
+#define SB_R10 0x2A
+#define SB_R11 0x2B
+#define SB_R12 0x2C
+#define SB_R13 0x2D
+#define SB_R14 0x2E
+#define SB_R15 0x2F
+
+/*
+ * GLCP STANDARD
+ */
+#define GLCP_CAP 0x00
+#define GLCP_CONFIG 0x01
+#define GLCP_SMI 0x02
+#define GLCP_ERROR 0x03
+#define GLCP_PM 0x04
+#define GLCP_DIAG 0x05
+
+/*
+ * GLCP SPEC.
+ */
+#define GLCP_CLK_DIS_DELAY 0x08
+#define GLCP_PM_CLK_DISABLE 0x09
+#define GLCP_GLB_PM 0x0B
+#define GLCP_DBG_OUT 0x0C
+#define GLCP_RSVD1 0x0D
+#define GLCP_SOFT_COM 0x0E
+#define SOFT_BAR_SMB_FLAG 0x00000001
+#define SOFT_BAR_GPIO_FLAG 0x00000002
+#define SOFT_BAR_MFGPT_FLAG 0x00000004
+#define SOFT_BAR_IRQ_FLAG 0x00000008
+#define SOFT_BAR_PMS_FLAG 0x00000010
+#define SOFT_BAR_ACPI_FLAG 0x00000020
+#define SOFT_BAR_IDE_FLAG 0x00000400
+#define SOFT_BAR_ACC_FLAG 0x00000800
+#define SOFT_BAR_OHCI_FLAG 0x00001000
+#define SOFT_BAR_EHCI_FLAG 0x00002000
+#define GLCP_RSVD2 0x0F
+#define GLCP_CLK_OFF 0x10
+#define GLCP_CLK_ACTIVE 0x11
+#define GLCP_CLK_DISABLE 0x12
+#define GLCP_CLK4ACK 0x13
+#define GLCP_SYS_RST 0x14
+#define GLCP_RSVD3 0x15
+#define GLCP_DBG_CLK_CTRL 0x16
+#define GLCP_CHIP_REV_ID 0x17
+
+/* PIC */
+#define PIC_YSEL_LOW 0x20
+#define PIC_YSEL_LOW_USB_SHIFT 8
+#define PIC_YSEL_LOW_ACC_SHIFT 16
+#define PIC_YSEL_LOW_FLASH_SHIFT 24
+#define PIC_YSEL_HIGH 0x21
+#define PIC_ZSEL_LOW 0x22
+#define PIC_ZSEL_HIGH 0x23
+#define PIC_IRQM_PRIM 0x24
+#define PIC_IRQM_LPC 0x25
+#define PIC_XIRR_STS_LOW 0x26
+#define PIC_XIRR_STS_HIGH 0x27
+#define PCI_SHDW 0x34
+
+/*
+ * DIVIL STANDARD
+ */
+#define DIVIL_CAP 0x00
+#define DIVIL_CONFIG 0x01
+#define DIVIL_SMI 0x02
+#define DIVIL_ERROR 0x03
+#define DIVIL_PM 0x04
+#define DIVIL_DIAG 0x05
+
+/*
+ * DIVIL SPEC.
+ */
+#define DIVIL_LBAR_IRQ 0x08
+#define DIVIL_LBAR_KEL 0x09
+#define DIVIL_LBAR_SMB 0x0B
+#define DIVIL_LBAR_GPIO 0x0C
+#define DIVIL_LBAR_MFGPT 0x0D
+#define DIVIL_LBAR_ACPI 0x0E
+#define DIVIL_LBAR_PMS 0x0F
+#define DIVIL_LEG_IO 0x14
+#define DIVIL_BALL_OPTS 0x15
+#define DIVIL_SOFT_IRQ 0x16
+#define DIVIL_SOFT_RESET 0x17
+
+/* MFGPT */
+#define MFGPT_IRQ 0x28
+
+/*
+ * IDE STANDARD
+ */
+#define IDE_CAP 0x00
+#define IDE_CONFIG 0x01
+#define IDE_SMI 0x02
+#define IDE_ERROR 0x03
+#define IDE_PM 0x04
+#define IDE_DIAG 0x05
+
+/*
+ * IDE SPEC.
+ */
+#define IDE_IO_BAR 0x08
+#define IDE_CFG 0x10
+#define IDE_DTC 0x12
+#define IDE_CAST 0x13
+#define IDE_ETC 0x14
+#define IDE_INTERNAL_PM 0x15
+
+/*
+ * ACC STANDARD
+ */
+#define ACC_CAP 0x00
+#define ACC_CONFIG 0x01
+#define ACC_SMI 0x02
+#define ACC_ERROR 0x03
+#define ACC_PM 0x04
+#define ACC_DIAG 0x05
+
+/*
+ * USB STANDARD
+ */
+#define USB_CAP 0x00
+#define USB_CONFIG 0x01
+#define USB_SMI 0x02
+#define USB_ERROR 0x03
+#define USB_PM 0x04
+#define USB_DIAG 0x05
+
+/*
+ * USB SPEC.
+ */
+#define USB_OHCI 0x08
+#define USB_EHCI 0x09
+
+/****************** NATIVE ***************************/
+/* GPIO : I/O SPACE; REG : 32BITS */
+#define GPIOL_OUT_VAL 0x00
+#define GPIOL_OUT_EN 0x04
+
+#endif /* _CS5536_H */
--- /dev/null
+/*
+ * cs5536 mfgpt header file
+ */
+
+#ifndef _CS5536_MFGPT_H
+#define _CS5536_MFGPT_H
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+#ifdef CONFIG_CS5536_MFGPT
+extern void setup_mfgpt0_timer(void);
+extern void disable_mfgpt0_counter(void);
+extern void enable_mfgpt0_counter(void);
+#else
+static inline void __maybe_unused setup_mfgpt0_timer(void)
+{
+}
+static inline void __maybe_unused disable_mfgpt0_counter(void)
+{
+}
+static inline void __maybe_unused enable_mfgpt0_counter(void)
+{
+}
+#endif
+
+#define MFGPT_TICK_RATE 14318000
+#define COMPARE ((MFGPT_TICK_RATE + HZ/2) / HZ)
+
+#define MFGPT_BASE mfgpt_base
+#define MFGPT0_CMP2 (MFGPT_BASE + 2)
+#define MFGPT0_CNT (MFGPT_BASE + 4)
+#define MFGPT0_SETUP (MFGPT_BASE + 6)
+
+#endif /*!_CS5536_MFGPT_H */
--- /dev/null
+/*
+ * the definition file of cs5536 Virtual Support Module(VSM).
+ * pci configuration space can be accessed through the VSM, so
+ * there is no need of the MSR read/write now, except the spec.
+ * MSR registers which are not implemented yet.
+ *
+ * Copyright (C) 2007 Lemote Inc.
+ * Author : jlliu, liujl@lemote.com
+ */
+
+#ifndef _CS5536_PCI_H
+#define _CS5536_PCI_H
+
+#include <linux/types.h>
+#include <linux/pci_regs.h>
+
+extern void cs5536_pci_conf_write4(int function, int reg, u32 value);
+extern u32 cs5536_pci_conf_read4(int function, int reg);
+
+#define CS5536_ACC_INTR 9
+#define CS5536_IDE_INTR 14
+#define CS5536_USB_INTR 11
+#define CS5536_MFGPT_INTR 5
+#define CS5536_UART1_INTR 4
+#define CS5536_UART2_INTR 3
+
+/************** PCI BUS DEVICE FUNCTION ***************/
+
+/*
+ * PCI bus device function
+ */
+#define PCI_BUS_CS5536 0
+#define PCI_IDSEL_CS5536 14
+
+/********** STANDARD PCI-2.2 EXPANSION ****************/
+
+/*
+ * PCI configuration space
+ * we have to virtualize the PCI configure space head, so we should
+ * define the necessary IDs and some others.
+ */
+
+/* CONFIG of PCI VENDOR ID*/
+#define CFG_PCI_VENDOR_ID(mod_dev_id, sys_vendor_id) \
+ (((mod_dev_id) << 16) | (sys_vendor_id))
+
+/* VENDOR ID */
+#define CS5536_VENDOR_ID 0x1022
+
+/* DEVICE ID */
+#define CS5536_ISA_DEVICE_ID 0x2090
+#define CS5536_IDE_DEVICE_ID 0x209a
+#define CS5536_ACC_DEVICE_ID 0x2093
+#define CS5536_OHCI_DEVICE_ID 0x2094
+#define CS5536_EHCI_DEVICE_ID 0x2095
+
+/* CLASS CODE : CLASS SUB-CLASS INTERFACE */
+#define CS5536_ISA_CLASS_CODE 0x060100
+#define CS5536_IDE_CLASS_CODE 0x010180
+#define CS5536_ACC_CLASS_CODE 0x040100
+#define CS5536_OHCI_CLASS_CODE 0x0C0310
+#define CS5536_EHCI_CLASS_CODE 0x0C0320
+
+/* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */
+
+#define CFG_PCI_CACHE_LINE_SIZE(header_type, latency_timer) \
+ ((PCI_NONE_BIST << 24) | ((header_type) << 16) \
+ | ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE);
+
+#define PCI_NONE_BIST 0x00 /* RO not implemented yet. */
+#define PCI_BRIDGE_HEADER_TYPE 0x80 /* RO */
+#define PCI_NORMAL_HEADER_TYPE 0x00
+#define PCI_NORMAL_LATENCY_TIMER 0x00
+#define PCI_NORMAL_CACHE_LINE_SIZE 0x08 /* RW */
+
+/* BAR */
+#define PCI_BAR0_REG 0x10
+#define PCI_BAR1_REG 0x14
+#define PCI_BAR2_REG 0x18
+#define PCI_BAR3_REG 0x1c
+#define PCI_BAR4_REG 0x20
+#define PCI_BAR5_REG 0x24
+#define PCI_BAR_COUNT 6
+#define PCI_BAR_RANGE_MASK 0xFFFFFFFF
+
+/* CARDBUS CIS POINTER */
+#define PCI_CARDBUS_CIS_POINTER 0x00000000
+
+/* SUBSYSTEM VENDOR ID */
+#define CS5536_SUB_VENDOR_ID CS5536_VENDOR_ID
+
+/* SUBSYSTEM ID */
+#define CS5536_ISA_SUB_ID CS5536_ISA_DEVICE_ID
+#define CS5536_IDE_SUB_ID CS5536_IDE_DEVICE_ID
+#define CS5536_ACC_SUB_ID CS5536_ACC_DEVICE_ID
+#define CS5536_OHCI_SUB_ID CS5536_OHCI_DEVICE_ID
+#define CS5536_EHCI_SUB_ID CS5536_EHCI_DEVICE_ID
+
+/* EXPANSION ROM BAR */
+#define PCI_EXPANSION_ROM_BAR 0x00000000
+
+/* CAPABILITIES POINTER */
+#define PCI_CAPLIST_POINTER 0x00000000
+#define PCI_CAPLIST_USB_POINTER 0x40
+/* INTERRUPT */
+
+#define CFG_PCI_INTERRUPT_LINE(pin, mod_intr) \
+ ((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \
+ ((pin) << 8) | (mod_intr))
+
+#define PCI_MAX_LATENCY 0x40
+#define PCI_MIN_GRANT 0x00
+#define PCI_DEFAULT_PIN 0x01
+
+/*********** EXPANSION PCI REG ************************/
+
+/*
+ * ISA EXPANSION
+ */
+#define PCI_UART1_INT_REG 0x50
+#define PCI_UART2_INT_REG 0x54
+#define PCI_ISA_FIXUP_REG 0x58
+
+/*
+ * IDE EXPANSION
+ */
+#define PCI_IDE_CFG_REG 0x40
+#define CS5536_IDE_FLASH_SIGNATURE 0xDEADBEEF
+#define PCI_IDE_DTC_REG 0x48
+#define PCI_IDE_CAST_REG 0x4C
+#define PCI_IDE_ETC_REG 0x50
+#define PCI_IDE_PM_REG 0x54
+#define PCI_IDE_INT_REG 0x60
+
+/*
+ * ACC EXPANSION
+ */
+#define PCI_ACC_INT_REG 0x50
+
+/*
+ * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI
+ */
+#define PCI_OHCI_PM_REG 0x40
+#define PCI_OHCI_INT_REG 0x50
+
+/*
+ * EHCI EXPANSION
+ */
+#define PCI_EHCI_LEGSMIEN_REG 0x50
+#define PCI_EHCI_LEGSMISTS_REG 0x54
+#define PCI_EHCI_FLADJ_REG 0x60
+
+#endif /* _CS5536_PCI_H_ */
--- /dev/null
+/*
+ * the read/write interfaces for Virtual Support Module(VSM)
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ */
+
+#ifndef _CS5536_VSM_H
+#define _CS5536_VSM_H
+
+#include <linux/types.h>
+
+typedef void (*cs5536_pci_vsm_write)(int reg, u32 value);
+typedef u32 (*cs5536_pci_vsm_read)(int reg);
+
+#define DECLARE_CS5536_MODULE(name) \
+extern void pci_##name##_write_reg(int reg, u32 value); \
+extern u32 pci_##name##_read_reg(int reg);
+
+/* ide module */
+DECLARE_CS5536_MODULE(ide)
+/* acc module */
+DECLARE_CS5536_MODULE(acc)
+/* ohci module */
+DECLARE_CS5536_MODULE(ohci)
+/* isa module */
+DECLARE_CS5536_MODULE(isa)
+/* ehci module */
+DECLARE_CS5536_MODULE(ehci)
+
+#endif /* _CS5536_VSM_H */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ */
+#ifndef __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
+#define __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
+
+#ifdef CONFIG_SWIOTLB
+#include <linux/swiotlb.h>
+#endif
+
+struct device;
+
+extern dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
+extern phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+ size_t size)
+{
+#ifdef CONFIG_CPU_LOONGSON3
+ return phys_to_dma(dev, virt_to_phys(addr));
+#else
+ return virt_to_phys(addr) | 0x80000000;
+#endif
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+ struct page *page)
+{
+#ifdef CONFIG_CPU_LOONGSON3
+ return phys_to_dma(dev, page_to_phys(page));
+#else
+ return page_to_phys(page) | 0x80000000;
+#endif
+}
+
+static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
+ dma_addr_t dma_addr)
+{
+#if defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_64BIT)
+ return dma_to_phys(dev, dma_addr);
+#elif defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+ return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
+#else
+ return dma_addr & 0x7fffffff;
+#endif
+}
+
+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
+ size_t size, enum dma_data_direction direction)
+{
+}
+
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+ /*
+ * we fall back to GFP_DMA when the mask isn't all 1s,
+ * so we can't guarantee allocations that must be
+ * within a tighter range than GFP_DMA..
+ */
+ if (mask < DMA_BIT_MASK(24))
+ return 0;
+
+ return 1;
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+#ifdef CONFIG_DMA_NONCOHERENT
+ return 0;
+#else
+ return 1;
+#endif /* CONFIG_DMA_NONCOHERENT */
+}
+
+static inline void plat_post_dma_flush(struct device *dev)
+{
+}
+
+#endif /* __ASM_MACH_LOONGSON64_DMA_COHERENCE_H */
--- /dev/null
+/*
+ * Loongson GPIO Support
+ *
+ * Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com>
+ * Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
+ * Copyright (c) 2014 Huacai Chen <chenhc@lemote.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LOONGSON_GPIO_H
+#define __LOONGSON_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+/* The chip can do interrupt
+ * but it has not been tested and doc not clear
+ */
+static inline int gpio_to_irq(int gpio)
+{
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(int gpio)
+{
+ return -EINVAL;
+}
+
+#endif /* __LOONGSON_GPIO_H */
--- /dev/null
+#ifndef __ASM_MACH_LOONGSON64_IRQ_H_
+#define __ASM_MACH_LOONGSON64_IRQ_H_
+
+#include <boot_param.h>
+
+#ifdef CONFIG_CPU_LOONGSON3
+
+/* cpu core interrupt numbers */
+#define MIPS_CPU_IRQ_BASE 56
+
+#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 2) /* UART */
+#define LOONGSON_HT1_IRQ (MIPS_CPU_IRQ_BASE + 3) /* HT1 */
+#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* CPU Timer */
+
+#define LOONGSON_HT1_CFG_BASE loongson_sysconf.ht_control_base
+#define LOONGSON_HT1_INT_VECTOR_BASE (LOONGSON_HT1_CFG_BASE + 0x80)
+#define LOONGSON_HT1_INT_EN_BASE (LOONGSON_HT1_CFG_BASE + 0xa0)
+#define LOONGSON_HT1_INT_VECTOR(n) \
+ LOONGSON3_REG32(LOONGSON_HT1_INT_VECTOR_BASE, 4 * (n))
+#define LOONGSON_HT1_INTN_EN(n) \
+ LOONGSON3_REG32(LOONGSON_HT1_INT_EN_BASE, 4 * (n))
+
+#define LOONGSON_INT_ROUTER_OFFSET 0x1400
+#define LOONGSON_INT_ROUTER_INTEN \
+ LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x24)
+#define LOONGSON_INT_ROUTER_INTENSET \
+ LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x28)
+#define LOONGSON_INT_ROUTER_INTENCLR \
+ LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x2c)
+#define LOONGSON_INT_ROUTER_ENTRY(n) \
+ LOONGSON3_REG8(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + n)
+#define LOONGSON_INT_ROUTER_LPC LOONGSON_INT_ROUTER_ENTRY(0x0a)
+#define LOONGSON_INT_ROUTER_HT1(n) LOONGSON_INT_ROUTER_ENTRY(n + 0x18)
+
+#define LOONGSON_INT_COREx_INTy(x, y) (1<<(x) | 1<<(y+4)) /* route to int y of core x */
+
+#endif
+
+extern void fixup_irqs(void);
+extern void loongson3_ipi_interrupt(struct pt_regs *regs);
+
+#include_next <irq.h>
+#endif /* __ASM_MACH_LOONGSON64_IRQ_H_ */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2009 Jiajie Chen (chenjiajie@cse.buaa.edu.cn)
+ * Copyright (C) 2012 Huacai Chen (chenhc@lemote.com)
+ */
+#ifndef __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H
+#define __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H
+
+/*
+ * Override macros used in arch/mips/kernel/head.S.
+ */
+ .macro kernel_entry_setup
+#ifdef CONFIG_CPU_LOONGSON3
+ .set push
+ .set mips64
+ /* Set LPA on LOONGSON3 config3 */
+ mfc0 t0, $16, 3
+ or t0, (0x1 << 7)
+ mtc0 t0, $16, 3
+ /* Set ELPA on LOONGSON3 pagegrain */
+ li t0, (0x1 << 29)
+ mtc0 t0, $5, 1
+ _ehb
+ .set pop
+#endif
+ .endm
+
+/*
+ * Do SMP slave processor setup.
+ */
+ .macro smp_slave_setup
+#ifdef CONFIG_CPU_LOONGSON3
+ .set push
+ .set mips64
+ /* Set LPA on LOONGSON3 config3 */
+ mfc0 t0, $16, 3
+ or t0, (0x1 << 7)
+ mtc0 t0, $16, 3
+ /* Set ELPA on LOONGSON3 pagegrain */
+ li t0, (0x1 << 29)
+ mtc0 t0, $5, 1
+ _ehb
+ .set pop
+#endif
+ .endm
+
+#endif /* __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H */
--- /dev/null
+/*
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON64_LOONGSON_H
+#define __ASM_MACH_LOONGSON64_LOONGSON_H
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kconfig.h>
+#include <boot_param.h>
+
+/* loongson internal northbridge initialization */
+extern void bonito_irq_init(void);
+
+/* machine-specific reboot/halt operation */
+extern void mach_prepare_reboot(void);
+extern void mach_prepare_shutdown(void);
+
+/* environment arguments from bootloader */
+extern u32 cpu_clock_freq;
+extern u32 memsize, highmemsize;
+extern struct plat_smp_ops loongson3_smp_ops;
+
+/* loongson-specific command line, env and memory initialization */
+extern void __init prom_init_memory(void);
+extern void __init prom_init_cmdline(void);
+extern void __init prom_init_machtype(void);
+extern void __init prom_init_env(void);
+#ifdef CONFIG_LOONGSON_UART_BASE
+extern unsigned long _loongson_uart_base[], loongson_uart_base[];
+extern void prom_init_loongson_uart_base(void);
+#endif
+
+static inline void prom_init_uart_base(void)
+{
+#ifdef CONFIG_LOONGSON_UART_BASE
+ prom_init_loongson_uart_base();
+#endif
+}
+
+/* irq operation functions */
+extern void bonito_irqdispatch(void);
+extern void __init bonito_irq_init(void);
+extern void __init mach_init_irq(void);
+extern void mach_irq_dispatch(unsigned int pending);
+extern int mach_i8259_irq(void);
+
+/* We need this in some places... */
+#define delay() ({ \
+ int x; \
+ for (x = 0; x < 100000; x++) \
+ __asm__ __volatile__(""); \
+})
+
+#define LOONGSON_REG(x) \
+ (*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
+
+#define LOONGSON3_REG8(base, x) \
+ (*(volatile u8 *)((char *)TO_UNCAC(base) + (x)))
+
+#define LOONGSON3_REG32(base, x) \
+ (*(volatile u32 *)((char *)TO_UNCAC(base) + (x)))
+
+#define LOONGSON_IRQ_BASE 32
+#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
+
+#include <linux/interrupt.h>
+static inline void do_perfcnt_IRQ(void)
+{
+#if IS_ENABLED(CONFIG_OPROFILE)
+ do_IRQ(LOONGSON2_PERFCNT_IRQ);
+#endif
+}
+
+#define LOONGSON_FLASH_BASE 0x1c000000
+#define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */
+#define LOONGSON_FLASH_TOP (LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1)
+
+#define LOONGSON_LIO0_BASE 0x1e000000
+#define LOONGSON_LIO0_SIZE 0x01C00000 /* 28M */
+#define LOONGSON_LIO0_TOP (LOONGSON_LIO0_BASE+LOONGSON_LIO0_SIZE-1)
+
+#define LOONGSON_BOOT_BASE 0x1fc00000
+#define LOONGSON_BOOT_SIZE 0x00100000 /* 1M */
+#define LOONGSON_BOOT_TOP (LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1)
+#define LOONGSON_REG_BASE 0x1fe00000
+#define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
+#define LOONGSON_REG_TOP (LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1)
+/* Loongson-3 specific registers */
+#define LOONGSON3_REG_BASE 0x3ff00000
+#define LOONGSON3_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
+#define LOONGSON3_REG_TOP (LOONGSON3_REG_BASE+LOONGSON3_REG_SIZE-1)
+
+#define LOONGSON_LIO1_BASE 0x1ff00000
+#define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */
+#define LOONGSON_LIO1_TOP (LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1)
+
+#define LOONGSON_PCILO0_BASE 0x10000000
+#define LOONGSON_PCILO1_BASE 0x14000000
+#define LOONGSON_PCILO2_BASE 0x18000000
+#define LOONGSON_PCILO_BASE LOONGSON_PCILO0_BASE
+#define LOONGSON_PCILO_SIZE 0x0c000000 /* 64M * 3 */
+#define LOONGSON_PCILO_TOP (LOONGSON_PCILO0_BASE+LOONGSON_PCILO_SIZE-1)
+
+#define LOONGSON_PCICFG_BASE 0x1fe80000
+#define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */
+#define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1)
+
+#if defined(CONFIG_HT_PCI)
+#define LOONGSON_PCIIO_BASE loongson_sysconf.pci_io_base
+#else
+#define LOONGSON_PCIIO_BASE 0x1fd00000
+#endif
+
+#define LOONGSON_PCIIO_SIZE 0x00100000 /* 1M */
+#define LOONGSON_PCIIO_TOP (LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1)
+
+/* Loongson Register Bases */
+
+#define LOONGSON_PCICONFIGBASE 0x00
+#define LOONGSON_REGBASE 0x100
+
+/* PCI Configuration Registers */
+
+#define LOONGSON_PCI_REG(x) LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x))
+#define LOONGSON_PCIDID LOONGSON_PCI_REG(0x00)
+#define LOONGSON_PCICMD LOONGSON_PCI_REG(0x04)
+#define LOONGSON_PCICLASS LOONGSON_PCI_REG(0x08)
+#define LOONGSON_PCILTIMER LOONGSON_PCI_REG(0x0c)
+#define LOONGSON_PCIBASE0 LOONGSON_PCI_REG(0x10)
+#define LOONGSON_PCIBASE1 LOONGSON_PCI_REG(0x14)
+#define LOONGSON_PCIBASE2 LOONGSON_PCI_REG(0x18)
+#define LOONGSON_PCIBASE3 LOONGSON_PCI_REG(0x1c)
+#define LOONGSON_PCIBASE4 LOONGSON_PCI_REG(0x20)
+#define LOONGSON_PCIEXPRBASE LOONGSON_PCI_REG(0x30)
+#define LOONGSON_PCIINT LOONGSON_PCI_REG(0x3c)
+
+#define LOONGSON_PCI_ISR4C LOONGSON_PCI_REG(0x4c)
+
+#define LOONGSON_PCICMD_PERR_CLR 0x80000000
+#define LOONGSON_PCICMD_SERR_CLR 0x40000000
+#define LOONGSON_PCICMD_MABORT_CLR 0x20000000
+#define LOONGSON_PCICMD_MTABORT_CLR 0x10000000
+#define LOONGSON_PCICMD_TABORT_CLR 0x08000000
+#define LOONGSON_PCICMD_MPERR_CLR 0x01000000
+#define LOONGSON_PCICMD_PERRRESPEN 0x00000040
+#define LOONGSON_PCICMD_ASTEPEN 0x00000080
+#define LOONGSON_PCICMD_SERREN 0x00000100
+#define LOONGSON_PCILTIMER_BUSLATENCY 0x0000ff00
+#define LOONGSON_PCILTIMER_BUSLATENCY_SHIFT 8
+
+/* Loongson h/w Configuration */
+
+#define LOONGSON_GENCFG_OFFSET 0x4
+#define LOONGSON_GENCFG LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET)
+
+#define LOONGSON_GENCFG_DEBUGMODE 0x00000001
+#define LOONGSON_GENCFG_SNOOPEN 0x00000002
+#define LOONGSON_GENCFG_CPUSELFRESET 0x00000004
+
+#define LOONGSON_GENCFG_FORCE_IRQA 0x00000008
+#define LOONGSON_GENCFG_IRQA_ISOUT 0x00000010
+#define LOONGSON_GENCFG_IRQA_FROM_INT1 0x00000020
+#define LOONGSON_GENCFG_BYTESWAP 0x00000040
+
+#define LOONGSON_GENCFG_UNCACHED 0x00000080
+#define LOONGSON_GENCFG_PREFETCHEN 0x00000100
+#define LOONGSON_GENCFG_WBEHINDEN 0x00000200
+#define LOONGSON_GENCFG_CACHEALG 0x00000c00
+#define LOONGSON_GENCFG_CACHEALG_SHIFT 10
+#define LOONGSON_GENCFG_PCIQUEUE 0x00001000
+#define LOONGSON_GENCFG_CACHESTOP 0x00002000
+#define LOONGSON_GENCFG_MSTRBYTESWAP 0x00004000
+#define LOONGSON_GENCFG_BUSERREN 0x00008000
+#define LOONGSON_GENCFG_NORETRYTIMEOUT 0x00010000
+#define LOONGSON_GENCFG_SHORTCOPYTIMEOUT 0x00020000
+
+/* PCI address map control */
+
+#define LOONGSON_PCIMAP LOONGSON_REG(LOONGSON_REGBASE + 0x10)
+#define LOONGSON_PCIMEMBASECFG LOONGSON_REG(LOONGSON_REGBASE + 0x14)
+#define LOONGSON_PCIMAP_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x18)
+
+/* GPIO Regs - r/w */
+
+#define LOONGSON_GPIODATA LOONGSON_REG(LOONGSON_REGBASE + 0x1c)
+#define LOONGSON_GPIOIE LOONGSON_REG(LOONGSON_REGBASE + 0x20)
+
+/* ICU Configuration Regs - r/w */
+
+#define LOONGSON_INTEDGE LOONGSON_REG(LOONGSON_REGBASE + 0x24)
+#define LOONGSON_INTSTEER LOONGSON_REG(LOONGSON_REGBASE + 0x28)
+#define LOONGSON_INTPOL LOONGSON_REG(LOONGSON_REGBASE + 0x2c)
+
+/* ICU Enable Regs - IntEn & IntISR are r/o. */
+
+#define LOONGSON_INTENSET LOONGSON_REG(LOONGSON_REGBASE + 0x30)
+#define LOONGSON_INTENCLR LOONGSON_REG(LOONGSON_REGBASE + 0x34)
+#define LOONGSON_INTEN LOONGSON_REG(LOONGSON_REGBASE + 0x38)
+#define LOONGSON_INTISR LOONGSON_REG(LOONGSON_REGBASE + 0x3c)
+
+/* ICU */
+#define LOONGSON_ICU_MBOXES 0x0000000f
+#define LOONGSON_ICU_MBOXES_SHIFT 0
+#define LOONGSON_ICU_DMARDY 0x00000010
+#define LOONGSON_ICU_DMAEMPTY 0x00000020
+#define LOONGSON_ICU_COPYRDY 0x00000040
+#define LOONGSON_ICU_COPYEMPTY 0x00000080
+#define LOONGSON_ICU_COPYERR 0x00000100
+#define LOONGSON_ICU_PCIIRQ 0x00000200
+#define LOONGSON_ICU_MASTERERR 0x00000400
+#define LOONGSON_ICU_SYSTEMERR 0x00000800
+#define LOONGSON_ICU_DRAMPERR 0x00001000
+#define LOONGSON_ICU_RETRYERR 0x00002000
+#define LOONGSON_ICU_GPIOS 0x01ff0000
+#define LOONGSON_ICU_GPIOS_SHIFT 16
+#define LOONGSON_ICU_GPINS 0x7e000000
+#define LOONGSON_ICU_GPINS_SHIFT 25
+#define LOONGSON_ICU_MBOX(N) (1<<(LOONGSON_ICU_MBOXES_SHIFT+(N)))
+#define LOONGSON_ICU_GPIO(N) (1<<(LOONGSON_ICU_GPIOS_SHIFT+(N)))
+#define LOONGSON_ICU_GPIN(N) (1<<(LOONGSON_ICU_GPINS_SHIFT+(N)))
+
+/* PCI prefetch window base & mask */
+
+#define LOONGSON_MEM_WIN_BASE_L LOONGSON_REG(LOONGSON_REGBASE + 0x40)
+#define LOONGSON_MEM_WIN_BASE_H LOONGSON_REG(LOONGSON_REGBASE + 0x44)
+#define LOONGSON_MEM_WIN_MASK_L LOONGSON_REG(LOONGSON_REGBASE + 0x48)
+#define LOONGSON_MEM_WIN_MASK_H LOONGSON_REG(LOONGSON_REGBASE + 0x4c)
+
+/* PCI_Hit*_Sel_* */
+
+#define LOONGSON_PCI_HIT0_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x50)
+#define LOONGSON_PCI_HIT0_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x54)
+#define LOONGSON_PCI_HIT1_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x58)
+#define LOONGSON_PCI_HIT1_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x5c)
+#define LOONGSON_PCI_HIT2_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x60)
+#define LOONGSON_PCI_HIT2_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x64)
+
+/* PXArb Config & Status */
+
+#define LOONGSON_PXARB_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x68)
+#define LOONGSON_PXARB_STATUS LOONGSON_REG(LOONGSON_REGBASE + 0x6c)
+
+#define MAX_PACKAGES 4
+
+/* Chip Config registor of each physical cpu package, PRid >= Loongson-2F */
+extern u64 loongson_chipcfg[MAX_PACKAGES];
+#define LOONGSON_CHIPCFG(id) (*(volatile u32 *)(loongson_chipcfg[id]))
+
+/* Chip Temperature registor of each physical cpu package, PRid >= Loongson-3A */
+extern u64 loongson_chiptemp[MAX_PACKAGES];
+#define LOONGSON_CHIPTEMP(id) (*(volatile u32 *)(loongson_chiptemp[id]))
+
+/* Freq Control register of each physical cpu package, PRid >= Loongson-3B */
+extern u64 loongson_freqctrl[MAX_PACKAGES];
+#define LOONGSON_FREQCTRL(id) (*(volatile u32 *)(loongson_freqctrl[id]))
+
+/* pcimap */
+
+#define LOONGSON_PCIMAP_PCIMAP_LO0 0x0000003f
+#define LOONGSON_PCIMAP_PCIMAP_LO0_SHIFT 0
+#define LOONGSON_PCIMAP_PCIMAP_LO1 0x00000fc0
+#define LOONGSON_PCIMAP_PCIMAP_LO1_SHIFT 6
+#define LOONGSON_PCIMAP_PCIMAP_LO2 0x0003f000
+#define LOONGSON_PCIMAP_PCIMAP_LO2_SHIFT 12
+#define LOONGSON_PCIMAP_PCIMAP_2 0x00040000
+#define LOONGSON_PCIMAP_WIN(WIN, ADDR) \
+ ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
+
+#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ
+#include <linux/cpufreq.h>
+extern struct cpufreq_frequency_table loongson2_clockmod_table[];
+#endif
+
+/*
+ * address windows configuration module
+ *
+ * loongson2e do not have this module
+ */
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+
+/* address window config module base address */
+#define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul
+#define LOONGSON_ADDRWINCFG_SIZE 0x180
+
+extern unsigned long _loongson_addrwincfg_base;
+#define LOONGSON_ADDRWINCFG(offset) \
+ (*(volatile u64 *)(_loongson_addrwincfg_base + (offset)))
+
+#define CPU_WIN0_BASE LOONGSON_ADDRWINCFG(0x00)
+#define CPU_WIN1_BASE LOONGSON_ADDRWINCFG(0x08)
+#define CPU_WIN2_BASE LOONGSON_ADDRWINCFG(0x10)
+#define CPU_WIN3_BASE LOONGSON_ADDRWINCFG(0x18)
+
+#define CPU_WIN0_MASK LOONGSON_ADDRWINCFG(0x20)
+#define CPU_WIN1_MASK LOONGSON_ADDRWINCFG(0x28)
+#define CPU_WIN2_MASK LOONGSON_ADDRWINCFG(0x30)
+#define CPU_WIN3_MASK LOONGSON_ADDRWINCFG(0x38)
+
+#define CPU_WIN0_MMAP LOONGSON_ADDRWINCFG(0x40)
+#define CPU_WIN1_MMAP LOONGSON_ADDRWINCFG(0x48)
+#define CPU_WIN2_MMAP LOONGSON_ADDRWINCFG(0x50)
+#define CPU_WIN3_MMAP LOONGSON_ADDRWINCFG(0x58)
+
+#define PCIDMA_WIN0_BASE LOONGSON_ADDRWINCFG(0x60)
+#define PCIDMA_WIN1_BASE LOONGSON_ADDRWINCFG(0x68)
+#define PCIDMA_WIN2_BASE LOONGSON_ADDRWINCFG(0x70)
+#define PCIDMA_WIN3_BASE LOONGSON_ADDRWINCFG(0x78)
+
+#define PCIDMA_WIN0_MASK LOONGSON_ADDRWINCFG(0x80)
+#define PCIDMA_WIN1_MASK LOONGSON_ADDRWINCFG(0x88)
+#define PCIDMA_WIN2_MASK LOONGSON_ADDRWINCFG(0x90)
+#define PCIDMA_WIN3_MASK LOONGSON_ADDRWINCFG(0x98)
+
+#define PCIDMA_WIN0_MMAP LOONGSON_ADDRWINCFG(0xa0)
+#define PCIDMA_WIN1_MMAP LOONGSON_ADDRWINCFG(0xa8)
+#define PCIDMA_WIN2_MMAP LOONGSON_ADDRWINCFG(0xb0)
+#define PCIDMA_WIN3_MMAP LOONGSON_ADDRWINCFG(0xb8)
+
+#define ADDRWIN_WIN0 0
+#define ADDRWIN_WIN1 1
+#define ADDRWIN_WIN2 2
+#define ADDRWIN_WIN3 3
+
+#define ADDRWIN_MAP_DST_DDR 0
+#define ADDRWIN_MAP_DST_PCI 1
+#define ADDRWIN_MAP_DST_LIO 1
+
+/*
+ * s: CPU, PCIDMA
+ * d: DDR, PCI, LIO
+ * win: 0, 1, 2, 3
+ * src: map source
+ * dst: map destination
+ * size: ~mask + 1
+ */
+#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
+ s##_WIN##w##_BASE = (src); \
+ s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \
+ s##_WIN##w##_MASK = ~(size-1); \
+} while (0)
+
+#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \
+ LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size)
+#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \
+ LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size)
+#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \
+ LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size)
+
+#endif /* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */
+
+#endif /* __ASM_MACH_LOONGSON64_LOONGSON_H */
--- /dev/null
+#ifndef __LOONGSON_HWMON_H_
+#define __LOONGSON_HWMON_H_
+
+#include <linux/types.h>
+
+#define MIN_TEMP 0
+#define MAX_TEMP 255
+#define NOT_VALID_TEMP 999
+
+typedef int (*get_temp_fun)(int);
+extern int loongson3_cpu_temp(int);
+
+/* 0:Max speed, 1:Manual, 2:Auto */
+enum fan_control_mode {
+ FAN_FULL_MODE = 0,
+ FAN_MANUAL_MODE = 1,
+ FAN_AUTO_MODE = 2,
+ FAN_MODE_END
+};
+
+struct temp_range {
+ u8 low;
+ u8 high;
+ u8 level;
+};
+
+#define CONSTANT_SPEED_POLICY 0 /* at constent speed */
+#define STEP_SPEED_POLICY 1 /* use up/down arrays to describe policy */
+#define KERNEL_HELPER_POLICY 2 /* kernel as a helper to fan control */
+
+#define MAX_STEP_NUM 16
+#define MAX_FAN_LEVEL 255
+
+/* loongson_fan_policy works when fan work at FAN_AUTO_MODE */
+struct loongson_fan_policy {
+ u8 type;
+
+ /* percent only used when type is CONSTANT_SPEED_POLICY */
+ u8 percent;
+
+ /* period between two check. (Unit: S) */
+ u8 adjust_period;
+
+ /* fan adjust usually depend on a temprature input */
+ get_temp_fun depend_temp;
+
+ /* up_step/down_step used when type is STEP_SPEED_POLICY */
+ u8 up_step_num;
+ u8 down_step_num;
+ struct temp_range up_step[MAX_STEP_NUM];
+ struct temp_range down_step[MAX_STEP_NUM];
+ struct delayed_work work;
+};
+
+#endif /* __LOONGSON_HWMON_H_*/
--- /dev/null
+/*
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON64_MACHINE_H
+#define __ASM_MACH_LOONGSON64_MACHINE_H
+
+#ifdef CONFIG_LEMOTE_FULOONG2E
+
+#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E
+
+#endif
+
+/* use fuloong2f as the default machine of LEMOTE_MACH2F */
+#ifdef CONFIG_LEMOTE_MACH2F
+
+#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2F
+
+#endif
+
+#ifdef CONFIG_LOONGSON_MACH3X
+
+#define LOONGSON_MACHTYPE MACH_LOONGSON_GENERIC
+
+#endif /* CONFIG_LOONGSON_MACH3X */
+
+#endif /* __ASM_MACH_LOONGSON64_MACHINE_H */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_LOONGSON64_MC146818RTC_H
+#define __ASM_MACH_LOONGSON64_MC146818RTC_H
+
+#include <linux/io.h>
+
+#define RTC_PORT(x) (0x70 + (x))
+#define RTC_IRQ 8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+ outb_p(addr, RTC_PORT(0));
+ return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+ outb_p(addr, RTC_PORT(0));
+ outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD 0
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
+#endif
+
+#endif /* __ASM_MACH_LOONGSON64_MC146818RTC_H */
--- /dev/null
+/*
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON64_MEM_H
+#define __ASM_MACH_LOONGSON64_MEM_H
+
+/*
+ * high memory space
+ *
+ * in loongson2e, starts from 512M
+ * in loongson2f, starts from 2G 256M
+ */
+#ifdef CONFIG_CPU_LOONGSON2E
+#define LOONGSON_HIGHMEM_START 0x20000000
+#else
+#define LOONGSON_HIGHMEM_START 0x90000000
+#endif
+
+/*
+ * the peripheral registers(MMIO):
+ *
+ * On the Lemote Loongson 2e system, reside between 0x1000:0000 and 0x2000:0000.
+ * On the Lemote Loongson 2f system, reside between 0x1000:0000 and 0x8000:0000.
+ */
+
+#define LOONGSON_MMIO_MEM_START 0x10000000
+
+#ifdef CONFIG_CPU_LOONGSON2E
+#define LOONGSON_MMIO_MEM_END 0x20000000
+#else
+#define LOONGSON_MMIO_MEM_END 0x80000000
+#endif
+
+#endif /* __ASM_MACH_LOONGSON64_MEM_H */
--- /dev/null
+/*
+ * Copyright (C) 2010 Loongson Inc. & Lemote Inc. &
+ * Insititute of Computing Technology
+ * Author: Xiang Gao, gaoxiang@ict.ac.cn
+ * Huacai Chen, chenhc@lemote.com
+ * Xiaofu Meng, Shuangshuang Zhang
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_MACH_MMZONE_H
+#define _ASM_MACH_MMZONE_H
+
+#include <boot_param.h>
+#define NODE_ADDRSPACE_SHIFT 44
+#define NODE0_ADDRSPACE_OFFSET 0x000000000000UL
+#define NODE1_ADDRSPACE_OFFSET 0x100000000000UL
+#define NODE2_ADDRSPACE_OFFSET 0x200000000000UL
+#define NODE3_ADDRSPACE_OFFSET 0x300000000000UL
+
+#define pa_to_nid(addr) (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT)
+
+#define LEVELS_PER_SLICE 128
+
+struct slice_data {
+ unsigned long irq_enable_mask[2];
+ int level_to_irq[LEVELS_PER_SLICE];
+};
+
+struct hub_data {
+ cpumask_t h_cpus;
+ unsigned long slice_map;
+ unsigned long irq_alloc_mask[2];
+ struct slice_data slice[2];
+};
+
+struct node_data {
+ struct pglist_data pglist;
+ struct hub_data hub;
+ cpumask_t cpumask;
+};
+
+extern struct node_data *__node_data[];
+
+#define NODE_DATA(n) (&__node_data[(n)]->pglist)
+#define hub_data(n) (&__node_data[(n)]->hub)
+
+extern void setup_zero_pages(void);
+extern void __init prom_init_numa_memory(void);
+
+#endif /* _ASM_MACH_MMZONE_H */
--- /dev/null
+/*
+ * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
+ * Copyright (c) 2009 Wu Zhangjin <wuzhangjin@gmail.com>
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON64_PCI_H_
+#define __ASM_MACH_LOONGSON64_PCI_H_
+
+extern struct pci_ops loongson_pci_ops;
+
+/* this is an offset from mips_io_port_base */
+#define LOONGSON_PCI_IO_START 0x00004000UL
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+
+/*
+ * we use address window2 to map cpu address space to pci space
+ * window2: cpu [1G, 2G] -> pci [1G, 2G]
+ * why not use window 0 & 1? because they are used by cpu when booting.
+ * window0: cpu [0, 256M] -> ddr [0, 256M]
+ * window1: cpu [256M, 512M] -> pci [256M, 512M]
+ */
+
+/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */
+#define LOONGSON_CPU_MEM_SRC 0x40000000ul /* 1G */
+#define LOONGSON_PCI_MEM_DST LOONGSON_CPU_MEM_SRC
+
+#define LOONGSON_PCI_MEM_START LOONGSON_PCI_MEM_DST
+#define LOONGSON_PCI_MEM_END (0x80000000ul-1) /* 2G */
+
+#define MMAP_CPUTOPCI_SIZE (LOONGSON_PCI_MEM_END - \
+ LOONGSON_PCI_MEM_START + 1)
+
+#else /* loongson2f/32bit & loongson2e */
+
+/* this pci memory space is mapped by pcimap in pci.c */
+#ifdef CONFIG_CPU_LOONGSON3
+#define LOONGSON_PCI_MEM_START 0x40000000UL
+#define LOONGSON_PCI_MEM_END 0x7effffffUL
+#else
+#define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE
+#define LOONGSON_PCI_MEM_END (LOONGSON_PCILO1_BASE + 0x04000000 * 2)
+#endif
+/* this is an offset from mips_io_port_base */
+#define LOONGSON_PCI_IO_START 0x00004000UL
+
+#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
+
+#endif /* !__ASM_MACH_LOONGSON64_PCI_H_ */
--- /dev/null
+#ifndef __ASM_MACH_LOONGSON64_SPACES_H_
+#define __ASM_MACH_LOONGSON64_SPACES_H_
+
+#if defined(CONFIG_64BIT)
+#define CAC_BASE _AC(0x9800000000000000, UL)
+#endif /* CONFIG_64BIT */
+
+#include <asm/mach-generic/spaces.h>
+#endif
--- /dev/null
+#ifndef _ASM_MACH_TOPOLOGY_H
+#define _ASM_MACH_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#define cpu_to_node(cpu) (cpu_logical_map(cpu) >> 2)
+#define parent_node(node) (node)
+#define cpumask_of_node(node) (&__node_data[(node)]->cpumask)
+
+struct pci_bus;
+extern int pcibus_to_node(struct pci_bus *);
+
+#define cpumask_of_pcibus(bus) (cpu_online_mask)
+
+extern unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
+
+#define node_distance(from, to) (__node_distances[(from)][(to)])
+
+#endif
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_MACH_TOPOLOGY_H */
--- /dev/null
+#ifndef __ASM_MACH_LOONGSON64_WORKAROUNDS_H_
+#define __ASM_MACH_LOONGSON64_WORKAROUNDS_H_
+
+#define WORKAROUND_CPUFREQ 0x00000001
+#define WORKAROUND_CPUHOTPLUG 0x00000002
+
+#endif
+++ /dev/null
-if MACH_LOONGSON
-
-choice
- prompt "Machine Type"
-
-config LEMOTE_FULOONG2E
- bool "Lemote Fuloong(2e) mini-PC"
- select ARCH_SPARSEMEM_ENABLE
- select CEVT_R4K
- select CSRC_R4K
- select SYS_HAS_CPU_LOONGSON2E
- select DMA_NONCOHERENT
- select BOOT_ELF32
- select BOARD_SCACHE
- select HW_HAS_PCI
- select I8259
- select ISA
- select IRQ_MIPS_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_HAS_EARLY_PRINTK
- select GENERIC_ISA_DMA_SUPPORT_BROKEN
- select CPU_HAS_WB
- select LOONGSON_MC146818
- help
- Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
- an FPGA northbridge
-
- Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
-
-config LEMOTE_MACH2F
- bool "Lemote Loongson 2F family machines"
- select ARCH_SPARSEMEM_ENABLE
- select BOARD_SCACHE
- select BOOT_ELF32
- select CEVT_R4K if ! MIPS_EXTERNAL_TIMER
- select CPU_HAS_WB
- select CS5536
- select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
- select DMA_NONCOHERENT
- select GENERIC_ISA_DMA_SUPPORT_BROKEN
- select HAVE_CLK
- select HW_HAS_PCI
- select I8259
- select IRQ_MIPS_CPU
- select ISA
- select SYS_HAS_CPU_LOONGSON2F
- select SYS_HAS_EARLY_PRINTK
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_HIGHMEM
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select LOONGSON_MC146818
- help
- Lemote Loongson 2F family machines utilize the 2F revision of
- Loongson processor and the AMD CS5536 south bridge.
-
- These family machines include fuloong2f mini PC, yeeloong2f notebook,
- LingLoong allinone PC and so forth.
-
-config LOONGSON_MACH3X
- bool "Generic Loongson 3 family machines"
- select ARCH_SPARSEMEM_ENABLE
- select GENERIC_ISA_DMA_SUPPORT_BROKEN
- select BOOT_ELF32
- select BOARD_SCACHE
- select CSRC_R4K
- select CEVT_R4K
- select CPU_HAS_WB
- select HW_HAS_PCI
- select ISA
- select HT_PCI
- select I8259
- select IRQ_MIPS_CPU
- select NR_CPUS_DEFAULT_4
- select SYS_HAS_CPU_LOONGSON3
- select SYS_HAS_EARLY_PRINTK
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_HOTPLUG_CPU
- select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_HIGHMEM
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select LOONGSON_MC146818
- select ZONE_DMA32
- select LEFI_FIRMWARE_INTERFACE
- select PHYS48_TO_HT40
- help
- Generic Loongson 3 family machines utilize the 3A/3B revision
- of Loongson processor and RS780/SBX00 chipset.
-endchoice
-
-config CS5536
- bool
-
-config CS5536_MFGPT
- bool "CS5536 MFGPT Timer"
- depends on CS5536 && !HIGH_RES_TIMERS
- select MIPS_EXTERNAL_TIMER
- help
- This option enables the mfgpt0 timer of AMD CS5536. With this timer
- switched on you can not use high resolution timers.
-
- If you want to enable the Loongson2 CPUFreq Driver, Please enable
- this option at first, otherwise, You will get wrong system time.
-
- If unsure, say Yes.
-
-config RS780_HPET
- bool "RS780/SBX00 HPET Timer"
- depends on LOONGSON_MACH3X
- select MIPS_EXTERNAL_TIMER
- help
- This option enables the hpet timer of AMD RS780/SBX00.
-
- If you want to enable the Loongson3 CPUFreq Driver, Please enable
- this option at first, otherwise, You will get wrong system time.
-
- If unsure, say Yes.
-
-config LOONGSON_SUSPEND
- bool
- default y
- depends on CPU_SUPPORTS_CPUFREQ && SUSPEND
-
-config LOONGSON_UART_BASE
- bool
- default y
- depends on EARLY_PRINTK || SERIAL_8250
-
-config IOMMU_HELPER
- bool
-
-config NEED_SG_DMA_LENGTH
- bool
-
-config SWIOTLB
- bool "Soft IOMMU Support for All-Memory DMA"
- default y
- depends on CPU_LOONGSON3
- select IOMMU_HELPER
- select NEED_SG_DMA_LENGTH
- select NEED_DMA_MAP_STATE
-
-config PHYS48_TO_HT40
- bool
- default y if CPU_LOONGSON3
-
-config LOONGSON_MC146818
- bool
- default n
-
-config LEFI_FIRMWARE_INTERFACE
- bool
-
-endif # MACH_LOONGSON
+++ /dev/null
-#
-# Common code for all Loongson based systems
-#
-
-obj-$(CONFIG_MACH_LOONGSON) += common/
-
-#
-# Lemote Fuloong mini-PC (Loongson 2E-based)
-#
-
-obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/
-
-#
-# Lemote loongson2f family machines
-#
-
-obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/
-
-#
-# All Loongson-3 family machines
-#
-
-obj-$(CONFIG_CPU_LOONGSON3) += loongson-3/
+++ /dev/null
-#
-# Loongson Processors' Support
-#
-
-# Only gcc >= 4.4 have Loongson specific support
-cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2E) += \
- $(call cc-option,-march=loongson2e,-march=r4600)
-cflags-$(CONFIG_CPU_LOONGSON2F) += \
- $(call cc-option,-march=loongson2f,-march=r4600)
-# Enable the workarounds for Loongson2f
-ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
- ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
- $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
- else
- cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
- endif
- ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
- $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
- else
- cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
- endif
-endif
-
-#
-# Loongson Machines' Support
-#
-
-platform-$(CONFIG_MACH_LOONGSON) += loongson/
-cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson -mno-branch-likely
-load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
-load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
-load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000
+++ /dev/null
-#
-# Makefile for loongson based machines.
-#
-
-obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
- bonito-irq.o mem.o machtype.o platform.o serial.o
-obj-$(CONFIG_PCI) += pci.o
-
-#
-# Serial port support
-#
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
-obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
-
-#
-# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
-# space
-#
-obj-$(CONFIG_CS5536) += cs5536/
-
-#
-# Suspend Support
-#
-
-obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
-
-#
-# Big Memory (SWIOTLB) Support
-#
-obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
+++ /dev/null
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/interrupt.h>
-#include <linux/compiler.h>
-
-#include <loongson.h>
-
-static inline void bonito_irq_enable(struct irq_data *d)
-{
- LOONGSON_INTENSET = (1 << (d->irq - LOONGSON_IRQ_BASE));
- mmiowb();
-}
-
-static inline void bonito_irq_disable(struct irq_data *d)
-{
- LOONGSON_INTENCLR = (1 << (d->irq - LOONGSON_IRQ_BASE));
- mmiowb();
-}
-
-static struct irq_chip bonito_irq_type = {
- .name = "bonito_irq",
- .irq_mask = bonito_irq_disable,
- .irq_unmask = bonito_irq_enable,
-};
-
-static struct irqaction __maybe_unused dma_timeout_irqaction = {
- .handler = no_action,
- .name = "dma_timeout",
-};
-
-void bonito_irq_init(void)
-{
- u32 i;
-
- for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++)
- irq_set_chip_and_handler(i, &bonito_irq_type,
- handle_level_irq);
-
-#ifdef CONFIG_CPU_LOONGSON2E
- setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
-#endif
-}
+++ /dev/null
-/*
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2003 ICT CAS
- * Author: Michael Guo <guoyi@ict.ac.cn>
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-void __init prom_init_cmdline(void)
-{
- int prom_argc;
- /* pmon passes arguments in 32bit pointers */
- int *_prom_argv;
- int i;
- long l;
-
- /* firmware arguments are initialized in head.S */
- prom_argc = fw_arg0;
- _prom_argv = (int *)fw_arg1;
-
- /* arg[0] is "g", the rest is boot parameters */
- arcs_cmdline[0] = '\0';
- for (i = 1; i < prom_argc; i++) {
- l = (long)_prom_argv[i];
- if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
- >= sizeof(arcs_cmdline))
- break;
- strcat(arcs_cmdline, ((char *)l));
- strcat(arcs_cmdline, " ");
- }
-
- prom_init_machtype();
-}
+++ /dev/null
-#
-# Makefile for CS5536 support.
-#
-
-obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \
- cs5536_isa.o cs5536_ehci.o
-
-#
-# Enable cs5536 mfgpt Timer
-#
-obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o
+++ /dev/null
-/*
- * the ACC Virtual Support Module of AMD CS5536
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu, liujl@lemote.com
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <cs5536/cs5536.h>
-#include <cs5536/cs5536_pci.h>
-
-void pci_acc_write_reg(int reg, u32 value)
-{
- u32 hi = 0, lo = value;
-
- switch (reg) {
- case PCI_COMMAND:
- _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
- if (value & PCI_COMMAND_MASTER)
- lo |= (0x03 << 8);
- else
- lo &= ~(0x03 << 8);
- _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
- break;
- case PCI_STATUS:
- if (value & PCI_STATUS_PARITY) {
- _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
- if (lo & SB_PARE_ERR_FLAG) {
- lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
- _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
- }
- }
- break;
- case PCI_BAR0_REG:
- if (value == PCI_BAR_RANGE_MASK) {
- _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
- lo |= SOFT_BAR_ACC_FLAG;
- _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
- } else if (value & 0x01) {
- value &= 0xfffffffc;
- hi = 0xA0000000 | ((value & 0x000ff000) >> 12);
- lo = 0x000fff80 | ((value & 0x00000fff) << 20);
- _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo);
- }
- break;
- case PCI_ACC_INT_REG:
- _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
- /* disable all the usb interrupt in PIC */
- lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT);
- if (value) /* enable all the acc interrupt in PIC */
- lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT);
- _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
- break;
- default:
- break;
- }
-}
-
-u32 pci_acc_read_reg(int reg)
-{
- u32 hi, lo;
- u32 conf_data = 0;
-
- switch (reg) {
- case PCI_VENDOR_ID:
- conf_data =
- CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID);
- break;
- case PCI_COMMAND:
- _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
- if (((lo & 0xfff00000) || (hi & 0x000000ff))
- && ((hi & 0xf0000000) == 0xa0000000))
- conf_data |= PCI_COMMAND_IO;
- _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
- if ((lo & 0x300) == 0x300)
- conf_data |= PCI_COMMAND_MASTER;
- break;
- case PCI_STATUS:
- conf_data |= PCI_STATUS_66MHZ;
- conf_data |= PCI_STATUS_FAST_BACK;
- _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
- if (lo & SB_PARE_ERR_FLAG)
- conf_data |= PCI_STATUS_PARITY;
- conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
- break;
- case PCI_CLASS_REVISION:
- _rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo);
- conf_data = lo & 0x000000ff;
- conf_data |= (CS5536_ACC_CLASS_CODE << 8);
- break;
- case PCI_CACHE_LINE_SIZE:
- conf_data =
- CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
- PCI_NORMAL_LATENCY_TIMER);
- break;
- case PCI_BAR0_REG:
- _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
- if (lo & SOFT_BAR_ACC_FLAG) {
- conf_data = CS5536_ACC_RANGE |
- PCI_BASE_ADDRESS_SPACE_IO;
- lo &= ~SOFT_BAR_ACC_FLAG;
- _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
- } else {
- _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
- conf_data = (hi & 0x000000ff) << 12;
- conf_data |= (lo & 0xfff00000) >> 20;
- conf_data |= 0x01;
- conf_data &= ~0x02;
- }
- break;
- case PCI_CARDBUS_CIS:
- conf_data = PCI_CARDBUS_CIS_POINTER;
- break;
- case PCI_SUBSYSTEM_VENDOR_ID:
- conf_data =
- CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID);
- break;
- case PCI_ROM_ADDRESS:
- conf_data = PCI_EXPANSION_ROM_BAR;
- break;
- case PCI_CAPABILITY_LIST:
- conf_data = PCI_CAPLIST_USB_POINTER;
- break;
- case PCI_INTERRUPT_LINE:
- conf_data =
- CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR);
- break;
- default:
- break;
- }
-
- return conf_data;
-}
+++ /dev/null
-/*
- * the EHCI Virtual Support Module of AMD CS5536
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu, liujl@lemote.com
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <cs5536/cs5536.h>
-#include <cs5536/cs5536_pci.h>
-
-void pci_ehci_write_reg(int reg, u32 value)
-{
- u32 hi = 0, lo = value;
-
- switch (reg) {
- case PCI_COMMAND:
- _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
- if (value & PCI_COMMAND_MASTER)
- hi |= PCI_COMMAND_MASTER;
- else
- hi &= ~PCI_COMMAND_MASTER;
-
- if (value & PCI_COMMAND_MEMORY)
- hi |= PCI_COMMAND_MEMORY;
- else
- hi &= ~PCI_COMMAND_MEMORY;
- _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
- break;
- case PCI_STATUS:
- if (value & PCI_STATUS_PARITY) {
- _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
- if (lo & SB_PARE_ERR_FLAG) {
- lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
- _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
- }
- }
- break;
- case PCI_BAR0_REG:
- if (value == PCI_BAR_RANGE_MASK) {
- _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
- lo |= SOFT_BAR_EHCI_FLAG;
- _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
- } else if ((value & 0x01) == 0x00) {
- _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
- lo = value;
- _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
-
- value &= 0xfffffff0;
- hi = 0x40000000 | ((value & 0xff000000) >> 24);
- lo = 0x000fffff | ((value & 0x00fff000) << 8);
- _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo);
- }
- break;
- case PCI_EHCI_LEGSMIEN_REG:
- _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
- hi &= 0x003f0000;
- hi |= (value & 0x3f) << 16;
- _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
- break;
- case PCI_EHCI_FLADJ_REG:
- _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
- hi &= ~0x00003f00;
- hi |= value & 0x00003f00;
- _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
- break;
- default:
- break;
- }
-}
-
-u32 pci_ehci_read_reg(int reg)
-{
- u32 conf_data = 0;
- u32 hi, lo;
-
- switch (reg) {
- case PCI_VENDOR_ID:
- conf_data =
- CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID);
- break;
- case PCI_COMMAND:
- _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
- if (hi & PCI_COMMAND_MASTER)
- conf_data |= PCI_COMMAND_MASTER;
- if (hi & PCI_COMMAND_MEMORY)
- conf_data |= PCI_COMMAND_MEMORY;
- break;
- case PCI_STATUS:
- conf_data |= PCI_STATUS_66MHZ;
- conf_data |= PCI_STATUS_FAST_BACK;
- _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
- if (lo & SB_PARE_ERR_FLAG)
- conf_data |= PCI_STATUS_PARITY;
- conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
- break;
- case PCI_CLASS_REVISION:
- _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
- conf_data = lo & 0x000000ff;
- conf_data |= (CS5536_EHCI_CLASS_CODE << 8);
- break;
- case PCI_CACHE_LINE_SIZE:
- conf_data =
- CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
- PCI_NORMAL_LATENCY_TIMER);
- break;
- case PCI_BAR0_REG:
- _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
- if (lo & SOFT_BAR_EHCI_FLAG) {
- conf_data = CS5536_EHCI_RANGE |
- PCI_BASE_ADDRESS_SPACE_MEMORY;
- lo &= ~SOFT_BAR_EHCI_FLAG;
- _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
- } else {
- _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
- conf_data = lo & 0xfffff000;
- }
- break;
- case PCI_CARDBUS_CIS:
- conf_data = PCI_CARDBUS_CIS_POINTER;
- break;
- case PCI_SUBSYSTEM_VENDOR_ID:
- conf_data =
- CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
- break;
- case PCI_ROM_ADDRESS:
- conf_data = PCI_EXPANSION_ROM_BAR;
- break;
- case PCI_CAPABILITY_LIST:
- conf_data = PCI_CAPLIST_USB_POINTER;
- break;
- case PCI_INTERRUPT_LINE:
- conf_data =
- CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
- break;
- case PCI_EHCI_LEGSMIEN_REG:
- _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
- conf_data = (hi & 0x003f0000) >> 16;
- break;
- case PCI_EHCI_LEGSMISTS_REG:
- _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
- conf_data = (hi & 0x3f000000) >> 24;
- break;
- case PCI_EHCI_FLADJ_REG:
- _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
- conf_data = hi & 0x00003f00;
- break;
- default:
- break;
- }
-
- return conf_data;
-}
+++ /dev/null
-/*
- * the IDE Virtual Support Module of AMD CS5536
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu, liujl@lemote.com
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <cs5536/cs5536.h>
-#include <cs5536/cs5536_pci.h>
-
-void pci_ide_write_reg(int reg, u32 value)
-{
- u32 hi = 0, lo = value;
-
- switch (reg) {
- case PCI_COMMAND:
- _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
- if (value & PCI_COMMAND_MASTER)
- lo |= (0x03 << 4);
- else
- lo &= ~(0x03 << 4);
- _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
- break;
- case PCI_STATUS:
- if (value & PCI_STATUS_PARITY) {
- _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
- if (lo & SB_PARE_ERR_FLAG) {
- lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
- _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
- }
- }
- break;
- case PCI_CACHE_LINE_SIZE:
- value &= 0x0000ff00;
- _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
- hi &= 0xffffff00;
- hi |= (value >> 8);
- _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
- break;
- case PCI_BAR4_REG:
- if (value == PCI_BAR_RANGE_MASK) {
- _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
- lo |= SOFT_BAR_IDE_FLAG;
- _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
- } else if (value & 0x01) {
- _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
- lo = (value & 0xfffffff0) | 0x1;
- _wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
-
- value &= 0xfffffffc;
- hi = 0x60000000 | ((value & 0x000ff000) >> 12);
- lo = 0x000ffff0 | ((value & 0x00000fff) << 20);
- _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo);
- }
- break;
- case PCI_IDE_CFG_REG:
- if (value == CS5536_IDE_FLASH_SIGNATURE) {
- _rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
- lo |= 0x01;
- _wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
- } else {
- _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
- lo = value;
- _wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
- }
- break;
- case PCI_IDE_DTC_REG:
- _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
- lo = value;
- _wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
- break;
- case PCI_IDE_CAST_REG:
- _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
- lo = value;
- _wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
- break;
- case PCI_IDE_ETC_REG:
- _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
- lo = value;
- _wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
- break;
- case PCI_IDE_PM_REG:
- _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
- lo = value;
- _wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
- break;
- default:
- break;
- }
-}
-
-u32 pci_ide_read_reg(int reg)
-{
- u32 conf_data = 0;
- u32 hi, lo;
-
- switch (reg) {
- case PCI_VENDOR_ID:
- conf_data =
- CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID);
- break;
- case PCI_COMMAND:
- _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
- if (lo & 0xfffffff0)
- conf_data |= PCI_COMMAND_IO;
- _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
- if ((lo & 0x30) == 0x30)
- conf_data |= PCI_COMMAND_MASTER;
- break;
- case PCI_STATUS:
- conf_data |= PCI_STATUS_66MHZ;
- conf_data |= PCI_STATUS_FAST_BACK;
- _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
- if (lo & SB_PARE_ERR_FLAG)
- conf_data |= PCI_STATUS_PARITY;
- conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
- break;
- case PCI_CLASS_REVISION:
- _rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo);
- conf_data = lo & 0x000000ff;
- conf_data |= (CS5536_IDE_CLASS_CODE << 8);
- break;
- case PCI_CACHE_LINE_SIZE:
- _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
- hi &= 0x000000f8;
- conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi);
- break;
- case PCI_BAR4_REG:
- _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
- if (lo & SOFT_BAR_IDE_FLAG) {
- conf_data = CS5536_IDE_RANGE |
- PCI_BASE_ADDRESS_SPACE_IO;
- lo &= ~SOFT_BAR_IDE_FLAG;
- _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
- } else {
- _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
- conf_data = lo & 0xfffffff0;
- conf_data |= 0x01;
- conf_data &= ~0x02;
- }
- break;
- case PCI_CARDBUS_CIS:
- conf_data = PCI_CARDBUS_CIS_POINTER;
- break;
- case PCI_SUBSYSTEM_VENDOR_ID:
- conf_data =
- CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID);
- break;
- case PCI_ROM_ADDRESS:
- conf_data = PCI_EXPANSION_ROM_BAR;
- break;
- case PCI_CAPABILITY_LIST:
- conf_data = PCI_CAPLIST_POINTER;
- break;
- case PCI_INTERRUPT_LINE:
- conf_data =
- CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR);
- break;
- case PCI_IDE_CFG_REG:
- _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
- conf_data = lo;
- break;
- case PCI_IDE_DTC_REG:
- _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
- conf_data = lo;
- break;
- case PCI_IDE_CAST_REG:
- _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
- conf_data = lo;
- break;
- case PCI_IDE_ETC_REG:
- _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
- conf_data = lo;
- break;
- case PCI_IDE_PM_REG:
- _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
- conf_data = lo;
- break;
- default:
- break;
- }
-
- return conf_data;
-}
+++ /dev/null
-/*
- * the ISA Virtual Support Module of AMD CS5536
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu, liujl@lemote.com
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/pci.h>
-#include <cs5536/cs5536.h>
-#include <cs5536/cs5536_pci.h>
-
-/* common variables for PCI_ISA_READ/WRITE_BAR */
-static const u32 divil_msr_reg[6] = {
- DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO),
- DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ),
- DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI),
-};
-
-static const u32 soft_bar_flag[6] = {
- SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG,
- SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG,
-};
-
-static const u32 sb_msr_reg[6] = {
- SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2),
- SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5),
-};
-
-static const u32 bar_space_range[6] = {
- CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE,
- CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE,
-};
-
-static const int bar_space_len[6] = {
- CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH,
- CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH,
-};
-
-/*
- * enable the divil module bar space.
- *
- * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg
- * and the RCONFx(0~5) reg to use the modules.
- */
-static void divil_lbar_enable(void)
-{
- u32 hi, lo;
- int offset;
-
- /*
- * The DIVIL IRQ is not used yet. and make the RCONF0 reserved.
- */
-
- for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
- _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
- hi |= 0x01;
- _wrmsr(DIVIL_MSR_REG(offset), hi, lo);
- }
-}
-
-/*
- * disable the divil module bar space.
- */
-static void divil_lbar_disable(void)
-{
- u32 hi, lo;
- int offset;
-
- for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
- _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
- hi &= ~0x01;
- _wrmsr(DIVIL_MSR_REG(offset), hi, lo);
- }
-}
-
-/*
- * BAR write: write value to the n BAR
- */
-
-void pci_isa_write_bar(int n, u32 value)
-{
- u32 hi = 0, lo = value;
-
- if (value == PCI_BAR_RANGE_MASK) {
- _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
- lo |= soft_bar_flag[n];
- _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
- } else if (value & 0x01) {
- /* NATIVE reg */
- hi = 0x0000f001;
- lo &= bar_space_range[n];
- _wrmsr(divil_msr_reg[n], hi, lo);
-
- /* RCONFx is 4bytes in units for I/O space */
- hi = ((value & 0x000ffffc) << 12) |
- ((bar_space_len[n] - 4) << 12) | 0x01;
- lo = ((value & 0x000ffffc) << 12) | 0x01;
- _wrmsr(sb_msr_reg[n], hi, lo);
- }
-}
-
-/*
- * BAR read: read the n BAR
- */
-
-u32 pci_isa_read_bar(int n)
-{
- u32 conf_data = 0;
- u32 hi, lo;
-
- _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
- if (lo & soft_bar_flag[n]) {
- conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO;
- lo &= ~soft_bar_flag[n];
- _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
- } else {
- _rdmsr(divil_msr_reg[n], &hi, &lo);
- conf_data = lo & bar_space_range[n];
- conf_data |= 0x01;
- conf_data &= ~0x02;
- }
- return conf_data;
-}
-
-/*
- * isa_write: ISA write transfer
- *
- * We assume that this is not a bus master transfer.
- */
-void pci_isa_write_reg(int reg, u32 value)
-{
- u32 hi = 0, lo = value;
- u32 temp;
-
- switch (reg) {
- case PCI_COMMAND:
- if (value & PCI_COMMAND_IO)
- divil_lbar_enable();
- else
- divil_lbar_disable();
- break;
- case PCI_STATUS:
- _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
- temp = lo & 0x0000ffff;
- if ((value & PCI_STATUS_SIG_TARGET_ABORT) &&
- (lo & SB_TAS_ERR_EN))
- temp |= SB_TAS_ERR_FLAG;
-
- if ((value & PCI_STATUS_REC_TARGET_ABORT) &&
- (lo & SB_TAR_ERR_EN))
- temp |= SB_TAR_ERR_FLAG;
-
- if ((value & PCI_STATUS_REC_MASTER_ABORT)
- && (lo & SB_MAR_ERR_EN))
- temp |= SB_MAR_ERR_FLAG;
-
- if ((value & PCI_STATUS_DETECTED_PARITY)
- && (lo & SB_PARE_ERR_EN))
- temp |= SB_PARE_ERR_FLAG;
-
- lo = temp;
- _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
- break;
- case PCI_CACHE_LINE_SIZE:
- value &= 0x0000ff00;
- _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
- hi &= 0xffffff00;
- hi |= (value >> 8);
- _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
- break;
- case PCI_BAR0_REG:
- pci_isa_write_bar(0, value);
- break;
- case PCI_BAR1_REG:
- pci_isa_write_bar(1, value);
- break;
- case PCI_BAR2_REG:
- pci_isa_write_bar(2, value);
- break;
- case PCI_BAR3_REG:
- pci_isa_write_bar(3, value);
- break;
- case PCI_BAR4_REG:
- pci_isa_write_bar(4, value);
- break;
- case PCI_BAR5_REG:
- pci_isa_write_bar(5, value);
- break;
- case PCI_UART1_INT_REG:
- _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
- /* disable uart1 interrupt in PIC */
- lo &= ~(0xf << 24);
- if (value) /* enable uart1 interrupt in PIC */
- lo |= (CS5536_UART1_INTR << 24);
- _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
- break;
- case PCI_UART2_INT_REG:
- _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
- /* disable uart2 interrupt in PIC */
- lo &= ~(0xf << 28);
- if (value) /* enable uart2 interrupt in PIC */
- lo |= (CS5536_UART2_INTR << 28);
- _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
- break;
- case PCI_ISA_FIXUP_REG:
- if (value) {
- /* enable the TARGET ABORT/MASTER ABORT etc. */
- _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
- lo |= 0x00000063;
- _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
- }
-
- default:
- /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */
- break;
- }
-}
-
-/*
- * isa_read: ISA read transfers
- *
- * We assume that this is not a bus master transfer.
- */
-u32 pci_isa_read_reg(int reg)
-{
- u32 conf_data = 0;
- u32 hi, lo;
-
- switch (reg) {
- case PCI_VENDOR_ID:
- conf_data =
- CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID);
- break;
- case PCI_COMMAND:
- /* we just check the first LBAR for the IO enable bit, */
- /* maybe we should changed later. */
- _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo);
- if (hi & 0x01)
- conf_data |= PCI_COMMAND_IO;
- break;
- case PCI_STATUS:
- conf_data |= PCI_STATUS_66MHZ;
- conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
- conf_data |= PCI_STATUS_FAST_BACK;
-
- _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
- if (lo & SB_TAS_ERR_FLAG)
- conf_data |= PCI_STATUS_SIG_TARGET_ABORT;
- if (lo & SB_TAR_ERR_FLAG)
- conf_data |= PCI_STATUS_REC_TARGET_ABORT;
- if (lo & SB_MAR_ERR_FLAG)
- conf_data |= PCI_STATUS_REC_MASTER_ABORT;
- if (lo & SB_PARE_ERR_FLAG)
- conf_data |= PCI_STATUS_DETECTED_PARITY;
- break;
- case PCI_CLASS_REVISION:
- _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo);
- conf_data = lo & 0x000000ff;
- conf_data |= (CS5536_ISA_CLASS_CODE << 8);
- break;
- case PCI_CACHE_LINE_SIZE:
- _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
- hi &= 0x000000f8;
- conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi);
- break;
- /*
- * we only use the LBAR of DIVIL, no RCONF used.
- * all of them are IO space.
- */
- case PCI_BAR0_REG:
- return pci_isa_read_bar(0);
- break;
- case PCI_BAR1_REG:
- return pci_isa_read_bar(1);
- break;
- case PCI_BAR2_REG:
- return pci_isa_read_bar(2);
- break;
- case PCI_BAR3_REG:
- break;
- case PCI_BAR4_REG:
- return pci_isa_read_bar(4);
- break;
- case PCI_BAR5_REG:
- return pci_isa_read_bar(5);
- break;
- case PCI_CARDBUS_CIS:
- conf_data = PCI_CARDBUS_CIS_POINTER;
- break;
- case PCI_SUBSYSTEM_VENDOR_ID:
- conf_data =
- CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID);
- break;
- case PCI_ROM_ADDRESS:
- conf_data = PCI_EXPANSION_ROM_BAR;
- break;
- case PCI_CAPABILITY_LIST:
- conf_data = PCI_CAPLIST_POINTER;
- break;
- case PCI_INTERRUPT_LINE:
- /* no interrupt used here */
- conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00);
- break;
- default:
- break;
- }
-
- return conf_data;
-}
-
-/*
- * The mfgpt timer interrupt is running early, so we must keep the south bridge
- * mmio always enabled. Otherwise we may race with the PCI configuration which
- * may temporarily disable it. When that happens and the timer interrupt fires,
- * we are not able to clear it and the system will hang.
- */
-static void cs5536_isa_mmio_always_on(struct pci_dev *dev)
-{
- dev->mmio_always_on = 1;
-}
-DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
- PCI_CLASS_BRIDGE_ISA, 8, cs5536_isa_mmio_always_on);
+++ /dev/null
-/*
- * CS5536 General timer functions
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Yanhua, yanh@lemote.com
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu zhangjin, wuzhangjin@gmail.com
- *
- * Reference: AMD Geode(TM) CS5536 Companion Device Data Book
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/jiffies.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-
-#include <asm/time.h>
-
-#include <cs5536/cs5536_mfgpt.h>
-
-static DEFINE_RAW_SPINLOCK(mfgpt_lock);
-
-static u32 mfgpt_base;
-
-/*
- * Initialize the MFGPT timer.
- *
- * This is also called after resume to bring the MFGPT into operation again.
- */
-
-/* disable counter */
-void disable_mfgpt0_counter(void)
-{
- outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP);
-}
-EXPORT_SYMBOL(disable_mfgpt0_counter);
-
-/* enable counter, comparator2 to event mode, 14.318MHz clock */
-void enable_mfgpt0_counter(void)
-{
- outw(0xe310, MFGPT0_SETUP);
-}
-EXPORT_SYMBOL(enable_mfgpt0_counter);
-
-static void init_mfgpt_timer(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- raw_spin_lock(&mfgpt_lock);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- outw(COMPARE, MFGPT0_CMP2); /* set comparator2 */
- outw(0, MFGPT0_CNT); /* set counter to 0 */
- enable_mfgpt0_counter();
- break;
-
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
- evt->mode == CLOCK_EVT_MODE_ONESHOT)
- disable_mfgpt0_counter();
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- /* The oneshot mode have very high deviation, Not use it! */
- break;
-
- case CLOCK_EVT_MODE_RESUME:
- /* Nothing to do here */
- break;
- }
- raw_spin_unlock(&mfgpt_lock);
-}
-
-static struct clock_event_device mfgpt_clockevent = {
- .name = "mfgpt",
- .features = CLOCK_EVT_FEAT_PERIODIC,
- .set_mode = init_mfgpt_timer,
- .irq = CS5536_MFGPT_INTR,
-};
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- u32 basehi;
-
- /*
- * get MFGPT base address
- *
- * NOTE: do not remove me, it's need for the value of mfgpt_base is
- * variable
- */
- _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base);
-
- /* ack */
- outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP);
-
- mfgpt_clockevent.event_handler(&mfgpt_clockevent);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction irq5 = {
- .handler = timer_interrupt,
- .flags = IRQF_NOBALANCING | IRQF_TIMER,
- .name = "timer"
-};
-
-/*
- * Initialize the conversion factor and the min/max deltas of the clock event
- * structure and register the clock event source with the framework.
- */
-void __init setup_mfgpt0_timer(void)
-{
- u32 basehi;
- struct clock_event_device *cd = &mfgpt_clockevent;
- unsigned int cpu = smp_processor_id();
-
- cd->cpumask = cpumask_of(cpu);
- clockevent_set_clock(cd, MFGPT_TICK_RATE);
- cd->max_delta_ns = clockevent_delta2ns(0xffff, cd);
- cd->min_delta_ns = clockevent_delta2ns(0xf, cd);
-
- /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */
- _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100);
-
- /* Enable Interrupt Gate 5 */
- _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000);
-
- /* get MFGPT base address */
- _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base);
-
- clockevents_register_device(cd);
-
- setup_irq(CS5536_MFGPT_INTR, &irq5);
-}
-
-/*
- * Since the MFGPT overflows every tick, its not very useful
- * to just read by itself. So use jiffies to emulate a free
- * running counter:
- */
-static cycle_t mfgpt_read(struct clocksource *cs)
-{
- unsigned long flags;
- int count;
- u32 jifs;
- static int old_count;
- static u32 old_jifs;
-
- raw_spin_lock_irqsave(&mfgpt_lock, flags);
- /*
- * Although our caller may have the read side of xtime_lock,
- * this is now a seqlock, and we are cheating in this routine
- * by having side effects on state that we cannot undo if
- * there is a collision on the seqlock and our caller has to
- * retry. (Namely, old_jifs and old_count.) So we must treat
- * jiffies as volatile despite the lock. We read jiffies
- * before latching the timer count to guarantee that although
- * the jiffies value might be older than the count (that is,
- * the counter may underflow between the last point where
- * jiffies was incremented and the point where we latch the
- * count), it cannot be newer.
- */
- jifs = jiffies;
- /* read the count */
- count = inw(MFGPT0_CNT);
-
- /*
- * It's possible for count to appear to go the wrong way for this
- * reason:
- *
- * The timer counter underflows, but we haven't handled the resulting
- * interrupt and incremented jiffies yet.
- *
- * Previous attempts to handle these cases intelligently were buggy, so
- * we just do the simple thing now.
- */
- if (count < old_count && jifs == old_jifs)
- count = old_count;
-
- old_count = count;
- old_jifs = jifs;
-
- raw_spin_unlock_irqrestore(&mfgpt_lock, flags);
-
- return (cycle_t) (jifs * COMPARE) + count;
-}
-
-static struct clocksource clocksource_mfgpt = {
- .name = "mfgpt",
- .rating = 120, /* Functional for real use, but not desired */
- .read = mfgpt_read,
- .mask = CLOCKSOURCE_MASK(32),
-};
-
-int __init init_mfgpt_clocksource(void)
-{
- if (num_possible_cpus() > 1) /* MFGPT does not scale! */
- return 0;
-
- return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
-}
-
-arch_initcall(init_mfgpt_clocksource);
+++ /dev/null
-/*
- * the OHCI Virtual Support Module of AMD CS5536
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu, liujl@lemote.com
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <cs5536/cs5536.h>
-#include <cs5536/cs5536_pci.h>
-
-void pci_ohci_write_reg(int reg, u32 value)
-{
- u32 hi = 0, lo = value;
-
- switch (reg) {
- case PCI_COMMAND:
- _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
- if (value & PCI_COMMAND_MASTER)
- hi |= PCI_COMMAND_MASTER;
- else
- hi &= ~PCI_COMMAND_MASTER;
-
- if (value & PCI_COMMAND_MEMORY)
- hi |= PCI_COMMAND_MEMORY;
- else
- hi &= ~PCI_COMMAND_MEMORY;
- _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
- break;
- case PCI_STATUS:
- if (value & PCI_STATUS_PARITY) {
- _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
- if (lo & SB_PARE_ERR_FLAG) {
- lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
- _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
- }
- }
- break;
- case PCI_BAR0_REG:
- if (value == PCI_BAR_RANGE_MASK) {
- _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
- lo |= SOFT_BAR_OHCI_FLAG;
- _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
- } else if ((value & 0x01) == 0x00) {
- _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
- lo = value;
- _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
-
- value &= 0xfffffff0;
- hi = 0x40000000 | ((value & 0xff000000) >> 24);
- lo = 0x000fffff | ((value & 0x00fff000) << 8);
- _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo);
- }
- break;
- case PCI_OHCI_INT_REG:
- _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
- lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT);
- if (value) /* enable all the usb interrupt in PIC */
- lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT);
- _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
- break;
- default:
- break;
- }
-}
-
-u32 pci_ohci_read_reg(int reg)
-{
- u32 conf_data = 0;
- u32 hi, lo;
-
- switch (reg) {
- case PCI_VENDOR_ID:
- conf_data =
- CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID);
- break;
- case PCI_COMMAND:
- _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
- if (hi & PCI_COMMAND_MASTER)
- conf_data |= PCI_COMMAND_MASTER;
- if (hi & PCI_COMMAND_MEMORY)
- conf_data |= PCI_COMMAND_MEMORY;
- break;
- case PCI_STATUS:
- conf_data |= PCI_STATUS_66MHZ;
- conf_data |= PCI_STATUS_FAST_BACK;
- _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
- if (lo & SB_PARE_ERR_FLAG)
- conf_data |= PCI_STATUS_PARITY;
- conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
- break;
- case PCI_CLASS_REVISION:
- _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
- conf_data = lo & 0x000000ff;
- conf_data |= (CS5536_OHCI_CLASS_CODE << 8);
- break;
- case PCI_CACHE_LINE_SIZE:
- conf_data =
- CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
- PCI_NORMAL_LATENCY_TIMER);
- break;
- case PCI_BAR0_REG:
- _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
- if (lo & SOFT_BAR_OHCI_FLAG) {
- conf_data = CS5536_OHCI_RANGE |
- PCI_BASE_ADDRESS_SPACE_MEMORY;
- lo &= ~SOFT_BAR_OHCI_FLAG;
- _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
- } else {
- _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
- conf_data = lo & 0xffffff00;
- conf_data &= ~0x0000000f; /* 32bit mem */
- }
- break;
- case PCI_CARDBUS_CIS:
- conf_data = PCI_CARDBUS_CIS_POINTER;
- break;
- case PCI_SUBSYSTEM_VENDOR_ID:
- conf_data =
- CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
- break;
- case PCI_ROM_ADDRESS:
- conf_data = PCI_EXPANSION_ROM_BAR;
- break;
- case PCI_CAPABILITY_LIST:
- conf_data = PCI_CAPLIST_USB_POINTER;
- break;
- case PCI_INTERRUPT_LINE:
- conf_data =
- CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
- break;
- case PCI_OHCI_INT_REG:
- _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
- if ((lo & 0x00000f00) == CS5536_USB_INTR)
- conf_data = 1;
- break;
- default:
- break;
- }
-
- return conf_data;
-}
+++ /dev/null
-/*
- * read/write operation to the PCI config space of CS5536
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu, liujl@lemote.com
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * the Virtual Support Module(VSM) for virtulizing the PCI
- * configure space are defined in cs5536_modulename.c respectively,
- *
- * after this virtulizing, user can access the PCI configure space
- * directly as a normal multi-function PCI device which follows
- * the PCI-2.2 spec.
- */
-
-#include <linux/types.h>
-#include <cs5536/cs5536_pci.h>
-#include <cs5536/cs5536_vsm.h>
-
-enum {
- CS5536_FUNC_START = -1,
- CS5536_ISA_FUNC,
- reserved_func,
- CS5536_IDE_FUNC,
- CS5536_ACC_FUNC,
- CS5536_OHCI_FUNC,
- CS5536_EHCI_FUNC,
- CS5536_FUNC_END,
-};
-
-static const cs5536_pci_vsm_write vsm_conf_write[] = {
- [CS5536_ISA_FUNC] = pci_isa_write_reg,
- [reserved_func] = NULL,
- [CS5536_IDE_FUNC] = pci_ide_write_reg,
- [CS5536_ACC_FUNC] = pci_acc_write_reg,
- [CS5536_OHCI_FUNC] = pci_ohci_write_reg,
- [CS5536_EHCI_FUNC] = pci_ehci_write_reg,
-};
-
-static const cs5536_pci_vsm_read vsm_conf_read[] = {
- [CS5536_ISA_FUNC] = pci_isa_read_reg,
- [reserved_func] = NULL,
- [CS5536_IDE_FUNC] = pci_ide_read_reg,
- [CS5536_ACC_FUNC] = pci_acc_read_reg,
- [CS5536_OHCI_FUNC] = pci_ohci_read_reg,
- [CS5536_EHCI_FUNC] = pci_ehci_read_reg,
-};
-
-/*
- * write to PCI config space and transfer it to MSR write.
- */
-void cs5536_pci_conf_write4(int function, int reg, u32 value)
-{
- if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
- return;
- if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0))
- return;
-
- if (vsm_conf_write[function] != NULL)
- vsm_conf_write[function](reg, value);
-}
-
-/*
- * read PCI config space and transfer it to MSR access.
- */
-u32 cs5536_pci_conf_read4(int function, int reg)
-{
- u32 data = 0;
-
- if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
- return 0;
- if ((reg < 0) || ((reg & 0x03) != 0))
- return 0;
- if (reg > 0x100)
- return 0xffffffff;
-
- if (vsm_conf_read[function] != NULL)
- data = vsm_conf_read[function](reg);
-
- return data;
-}
+++ /dev/null
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-#include <linux/swiotlb.h>
-#include <linux/bootmem.h>
-
-#include <asm/bootinfo.h>
-#include <boot_param.h>
-#include <dma-coherence.h>
-
-static void *loongson_dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
-{
- void *ret;
-
- if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
- return ret;
-
- /* ignore region specifiers */
- gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
-
-#ifdef CONFIG_ISA
- if (dev == NULL)
- gfp |= __GFP_DMA;
- else
-#endif
-#ifdef CONFIG_ZONE_DMA
- if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
- gfp |= __GFP_DMA;
- else
-#endif
-#ifdef CONFIG_ZONE_DMA32
- if (dev->coherent_dma_mask < DMA_BIT_MASK(40))
- gfp |= __GFP_DMA32;
- else
-#endif
- ;
- gfp |= __GFP_NORETRY;
-
- ret = swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
- mb();
- return ret;
-}
-
-static void loongson_dma_free_coherent(struct device *dev, size_t size,
- void *vaddr, dma_addr_t dma_handle, struct dma_attrs *attrs)
-{
- int order = get_order(size);
-
- if (dma_release_from_coherent(dev, order, vaddr))
- return;
-
- swiotlb_free_coherent(dev, size, vaddr, dma_handle);
-}
-
-static dma_addr_t loongson_dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction dir,
- struct dma_attrs *attrs)
-{
- dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
- dir, attrs);
- mb();
- return daddr;
-}
-
-static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction dir,
- struct dma_attrs *attrs)
-{
- int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, NULL);
- mb();
-
- return r;
-}
-
-static void loongson_dma_sync_single_for_device(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction dir)
-{
- swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
- mb();
-}
-
-static void loongson_dma_sync_sg_for_device(struct device *dev,
- struct scatterlist *sg, int nents,
- enum dma_data_direction dir)
-{
- swiotlb_sync_sg_for_device(dev, sg, nents, dir);
- mb();
-}
-
-static int loongson_dma_set_mask(struct device *dev, u64 mask)
-{
- if (mask > DMA_BIT_MASK(loongson_sysconf.dma_mask_bits)) {
- *dev->dma_mask = DMA_BIT_MASK(loongson_sysconf.dma_mask_bits);
- return -EIO;
- }
-
- *dev->dma_mask = mask;
-
- return 0;
-}
-
-dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
- long nid;
-#ifdef CONFIG_PHYS48_TO_HT40
- /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
- * Loongson-3's 48bit address space and embed it into 40bit */
- nid = (paddr >> 44) & 0x3;
- paddr = ((nid << 44) ^ paddr) | (nid << 37);
-#endif
- return paddr;
-}
-
-phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
-{
- long nid;
-#ifdef CONFIG_PHYS48_TO_HT40
- /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
- * Loongson-3's 48bit address space and embed it into 40bit */
- nid = (daddr >> 37) & 0x3;
- daddr = ((nid << 37) ^ daddr) | (nid << 44);
-#endif
- return daddr;
-}
-
-static struct dma_map_ops loongson_dma_map_ops = {
- .alloc = loongson_dma_alloc_coherent,
- .free = loongson_dma_free_coherent,
- .map_page = loongson_dma_map_page,
- .unmap_page = swiotlb_unmap_page,
- .map_sg = loongson_dma_map_sg,
- .unmap_sg = swiotlb_unmap_sg_attrs,
- .sync_single_for_cpu = swiotlb_sync_single_for_cpu,
- .sync_single_for_device = loongson_dma_sync_single_for_device,
- .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
- .sync_sg_for_device = loongson_dma_sync_sg_for_device,
- .mapping_error = swiotlb_dma_mapping_error,
- .dma_supported = swiotlb_dma_supported,
- .set_dma_mask = loongson_dma_set_mask
-};
-
-void __init plat_swiotlb_setup(void)
-{
- swiotlb_init(1);
- mips_dma_map_ops = &loongson_dma_map_ops;
-}
+++ /dev/null
-/* early printk support
- *
- * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
- * Copyright (c) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/serial_reg.h>
-
-#include <loongson.h>
-
-#define PORT(base, offset) (u8 *)(base + offset)
-
-static inline unsigned int serial_in(unsigned char *base, int offset)
-{
- return readb(PORT(base, offset));
-}
-
-static inline void serial_out(unsigned char *base, int offset, int value)
-{
- writeb(value, PORT(base, offset));
-}
-
-void prom_putchar(char c)
-{
- int timeout;
- unsigned char *uart_base;
-
- uart_base = (unsigned char *)_loongson_uart_base[0];
- timeout = 1024;
-
- while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) &&
- (timeout-- > 0))
- ;
-
- serial_out(uart_base, UART_TX, c);
-}
+++ /dev/null
-/*
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2003 ICT CAS
- * Author: Michael Guo <guoyi@ict.ac.cn>
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/module.h>
-#include <asm/bootinfo.h>
-#include <loongson.h>
-#include <boot_param.h>
-#include <workarounds.h>
-
-u32 cpu_clock_freq;
-EXPORT_SYMBOL(cpu_clock_freq);
-struct efi_memory_map_loongson *loongson_memmap;
-struct loongson_system_configuration loongson_sysconf;
-
-u64 loongson_chipcfg[MAX_PACKAGES] = {0xffffffffbfc00180};
-u64 loongson_chiptemp[MAX_PACKAGES];
-u64 loongson_freqctrl[MAX_PACKAGES];
-
-unsigned long long smp_group[4];
-
-#define parse_even_earlier(res, option, p) \
-do { \
- unsigned int tmp __maybe_unused; \
- \
- if (strncmp(option, (char *)p, strlen(option)) == 0) \
- tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \
-} while (0)
-
-void __init prom_init_env(void)
-{
- /* pmon passes arguments in 32bit pointers */
- unsigned int processor_id;
-
-#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
- int *_prom_envp;
- long l;
-
- /* firmware arguments are initialized in head.S */
- _prom_envp = (int *)fw_arg2;
-
- l = (long)*_prom_envp;
- while (l != 0) {
- parse_even_earlier(cpu_clock_freq, "cpuclock", l);
- parse_even_earlier(memsize, "memsize", l);
- parse_even_earlier(highmemsize, "highmemsize", l);
- _prom_envp++;
- l = (long)*_prom_envp;
- }
- if (memsize == 0)
- memsize = 256;
- pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize);
-#else
- struct boot_params *boot_p;
- struct loongson_params *loongson_p;
- struct system_loongson *esys;
- struct efi_cpuinfo_loongson *ecpu;
- struct irq_source_routing_table *eirq_source;
-
- /* firmware arguments are initialized in head.S */
- boot_p = (struct boot_params *)fw_arg2;
- loongson_p = &(boot_p->efi.smbios.lp);
-
- esys = (struct system_loongson *)
- ((u64)loongson_p + loongson_p->system_offset);
- ecpu = (struct efi_cpuinfo_loongson *)
- ((u64)loongson_p + loongson_p->cpu_offset);
- eirq_source = (struct irq_source_routing_table *)
- ((u64)loongson_p + loongson_p->irq_offset);
- loongson_memmap = (struct efi_memory_map_loongson *)
- ((u64)loongson_p + loongson_p->memory_offset);
-
- cpu_clock_freq = ecpu->cpu_clock_freq;
- loongson_sysconf.cputype = ecpu->cputype;
- if (ecpu->cputype == Loongson_3A) {
- loongson_sysconf.cores_per_node = 4;
- loongson_sysconf.cores_per_package = 4;
- smp_group[0] = 0x900000003ff01000;
- smp_group[1] = 0x900010003ff01000;
- smp_group[2] = 0x900020003ff01000;
- smp_group[3] = 0x900030003ff01000;
- loongson_chipcfg[0] = 0x900000001fe00180;
- loongson_chipcfg[1] = 0x900010001fe00180;
- loongson_chipcfg[2] = 0x900020001fe00180;
- loongson_chipcfg[3] = 0x900030001fe00180;
- loongson_chiptemp[0] = 0x900000001fe0019c;
- loongson_chiptemp[1] = 0x900010001fe0019c;
- loongson_chiptemp[2] = 0x900020001fe0019c;
- loongson_chiptemp[3] = 0x900030001fe0019c;
- loongson_sysconf.ht_control_base = 0x90000EFDFB000000;
- loongson_sysconf.workarounds = WORKAROUND_CPUFREQ;
- } else if (ecpu->cputype == Loongson_3B) {
- loongson_sysconf.cores_per_node = 4; /* One chip has 2 nodes */
- loongson_sysconf.cores_per_package = 8;
- smp_group[0] = 0x900000003ff01000;
- smp_group[1] = 0x900010003ff05000;
- smp_group[2] = 0x900020003ff09000;
- smp_group[3] = 0x900030003ff0d000;
- loongson_chipcfg[0] = 0x900000001fe00180;
- loongson_chipcfg[1] = 0x900020001fe00180;
- loongson_chipcfg[2] = 0x900040001fe00180;
- loongson_chipcfg[3] = 0x900060001fe00180;
- loongson_chiptemp[0] = 0x900000001fe0019c;
- loongson_chiptemp[1] = 0x900020001fe0019c;
- loongson_chiptemp[2] = 0x900040001fe0019c;
- loongson_chiptemp[3] = 0x900060001fe0019c;
- loongson_freqctrl[0] = 0x900000001fe001d0;
- loongson_freqctrl[1] = 0x900020001fe001d0;
- loongson_freqctrl[2] = 0x900040001fe001d0;
- loongson_freqctrl[3] = 0x900060001fe001d0;
- loongson_sysconf.ht_control_base = 0x90001EFDFB000000;
- loongson_sysconf.workarounds = WORKAROUND_CPUHOTPLUG;
- } else {
- loongson_sysconf.cores_per_node = 1;
- loongson_sysconf.cores_per_package = 1;
- loongson_chipcfg[0] = 0x900000001fe00180;
- }
-
- loongson_sysconf.nr_cpus = ecpu->nr_cpus;
- loongson_sysconf.boot_cpu_id = ecpu->cpu_startup_core_id;
- loongson_sysconf.reserved_cpus_mask = ecpu->reserved_cores_mask;
- if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0)
- loongson_sysconf.nr_cpus = NR_CPUS;
- loongson_sysconf.nr_nodes = (loongson_sysconf.nr_cpus +
- loongson_sysconf.cores_per_node - 1) /
- loongson_sysconf.cores_per_node;
-
- loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr;
- loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr;
- loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr;
- loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits;
- if (loongson_sysconf.dma_mask_bits < 32 ||
- loongson_sysconf.dma_mask_bits > 64)
- loongson_sysconf.dma_mask_bits = 32;
-
- loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm;
- loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown;
- loongson_sysconf.suspend_addr = boot_p->reset_system.DoSuspend;
-
- loongson_sysconf.vgabios_addr = boot_p->efi.smbios.vga_bios;
- pr_debug("Shutdown Addr: %llx, Restart Addr: %llx, VBIOS Addr: %llx\n",
- loongson_sysconf.poweroff_addr, loongson_sysconf.restart_addr,
- loongson_sysconf.vgabios_addr);
-
- memset(loongson_sysconf.ecname, 0, 32);
- if (esys->has_ec)
- memcpy(loongson_sysconf.ecname, esys->ec_name, 32);
- loongson_sysconf.workarounds |= esys->workarounds;
-
- loongson_sysconf.nr_uarts = esys->nr_uarts;
- if (esys->nr_uarts < 1 || esys->nr_uarts > MAX_UARTS)
- loongson_sysconf.nr_uarts = 1;
- memcpy(loongson_sysconf.uarts, esys->uarts,
- sizeof(struct uart_device) * loongson_sysconf.nr_uarts);
-
- loongson_sysconf.nr_sensors = esys->nr_sensors;
- if (loongson_sysconf.nr_sensors > MAX_SENSORS)
- loongson_sysconf.nr_sensors = 0;
- if (loongson_sysconf.nr_sensors)
- memcpy(loongson_sysconf.sensors, esys->sensors,
- sizeof(struct sensor_device) * loongson_sysconf.nr_sensors);
-#endif
- if (cpu_clock_freq == 0) {
- processor_id = (¤t_cpu_data)->processor_id;
- switch (processor_id & PRID_REV_MASK) {
- case PRID_REV_LOONGSON2E:
- cpu_clock_freq = 533080000;
- break;
- case PRID_REV_LOONGSON2F:
- cpu_clock_freq = 797000000;
- break;
- case PRID_REV_LOONGSON3A:
- cpu_clock_freq = 900000000;
- break;
- case PRID_REV_LOONGSON3B_R1:
- case PRID_REV_LOONGSON3B_R2:
- cpu_clock_freq = 1000000000;
- break;
- default:
- cpu_clock_freq = 100000000;
- break;
- }
- }
- pr_info("CpuClock = %u\n", cpu_clock_freq);
-}
+++ /dev/null
-/*
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/bootmem.h>
-#include <asm/bootinfo.h>
-#include <asm/smp-ops.h>
-
-#include <loongson.h>
-
-/* Loongson CPU address windows config space base address */
-unsigned long __maybe_unused _loongson_addrwincfg_base;
-
-void __init prom_init(void)
-{
-#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
- _loongson_addrwincfg_base = (unsigned long)
- ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE);
-#endif
-
- prom_init_cmdline();
- prom_init_env();
-
- /* init base address of io space */
- set_io_port_base((unsigned long)
- ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
-
-#ifdef CONFIG_NUMA
- prom_init_numa_memory();
-#else
- prom_init_memory();
-#endif
-
- /*init the uart base address */
- prom_init_uart_base();
- register_smp_ops(&loongson3_smp_ops);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
+++ /dev/null
-/*
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-
-#include <loongson.h>
-/*
- * the first level int-handler will jump here if it is a bonito irq
- */
-void bonito_irqdispatch(void)
-{
- u32 int_status;
- int i;
-
- /* workaround the IO dma problem: let cpu looping to allow DMA finish */
- int_status = LOONGSON_INTISR;
- while (int_status & (1 << 10)) {
- udelay(1);
- int_status = LOONGSON_INTISR;
- }
-
- /* Get pending sources, masked by current enables */
- int_status = LOONGSON_INTISR & LOONGSON_INTEN;
-
- if (int_status) {
- i = __ffs(int_status);
- do_IRQ(LOONGSON_IRQ_BASE + i);
- }
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending;
-
- pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
- /* machine-specific plat_irq_dispatch */
- mach_irq_dispatch(pending);
-}
-
-void __init arch_init_irq(void)
-{
- /*
- * Clear all of the interrupts while we change the able around a bit.
- * int-handler is not on bootstrap
- */
- clear_c0_status(ST0_IM | ST0_BEV);
-
- /* no steer */
- LOONGSON_INTSTEER = 0;
-
- /*
- * Mask out all interrupt by writing "1" to all bit position in
- * the interrupt reset reg.
- */
- LOONGSON_INTENCLR = ~0;
-
- /* machine specific irq init */
- mach_init_irq();
-}
+++ /dev/null
-/*
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/errno.h>
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-#include <machine.h>
-
-/* please ensure the length of the machtype string is less than 50 */
-#define MACHTYPE_LEN 50
-
-static const char *system_types[] = {
- [MACH_LOONGSON_UNKNOWN] = "unknown loongson machine",
- [MACH_LEMOTE_FL2E] = "lemote-fuloong-2e-box",
- [MACH_LEMOTE_FL2F] = "lemote-fuloong-2f-box",
- [MACH_LEMOTE_ML2F7] = "lemote-mengloong-2f-7inches",
- [MACH_LEMOTE_YL2F89] = "lemote-yeeloong-2f-8.9inches",
- [MACH_DEXXON_GDIUM2F10] = "dexxon-gdium-2f",
- [MACH_LEMOTE_NAS] = "lemote-nas-2f",
- [MACH_LEMOTE_LL2F] = "lemote-lynloong-2f",
- [MACH_LOONGSON_GENERIC] = "generic-loongson-machine",
- [MACH_LOONGSON_END] = NULL,
-};
-
-const char *get_system_type(void)
-{
- return system_types[mips_machtype];
-}
-
-void __weak __init mach_prom_init_machtype(void)
-{
-}
-
-void __init prom_init_machtype(void)
-{
- char *p, str[MACHTYPE_LEN + 1];
- int machtype = MACH_LEMOTE_FL2E;
-
- mips_machtype = LOONGSON_MACHTYPE;
-
- p = strstr(arcs_cmdline, "machtype=");
- if (!p) {
- mach_prom_init_machtype();
- return;
- }
- p += strlen("machtype=");
- strncpy(str, p, MACHTYPE_LEN);
- str[MACHTYPE_LEN] = '\0';
- p = strstr(str, " ");
- if (p)
- *p = '\0';
-
- for (; system_types[machtype]; machtype++)
- if (strstr(system_types[machtype], str)) {
- mips_machtype = machtype;
- break;
- }
-}
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/fs.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-#include <boot_param.h>
-#include <mem.h>
-#include <pci.h>
-
-#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
-
-u32 memsize, highmemsize;
-
-void __init prom_init_memory(void)
-{
- add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
-
- add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
- 20), BOOT_MEM_RESERVED);
-
-#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
- {
- int bit;
-
- bit = fls(memsize + highmemsize);
- if (bit != ffs(memsize + highmemsize))
- bit += 20;
- else
- bit = bit + 20 - 1;
-
- /* set cpu window3 to map CPU to DDR: 2G -> 2G */
- LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul,
- 0x80000000ul, (1 << bit));
- mmiowb();
- }
-#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
-
-#ifdef CONFIG_64BIT
- if (highmemsize > 0)
- add_memory_region(LOONGSON_HIGHMEM_START,
- highmemsize << 20, BOOT_MEM_RAM);
-
- add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START -
- LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED);
-
-#endif /* !CONFIG_64BIT */
-}
-
-#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */
-
-void __init prom_init_memory(void)
-{
- int i;
- u32 node_id;
- u32 mem_type;
-
- /* parse memory information */
- for (i = 0; i < loongson_memmap->nr_map; i++) {
- node_id = loongson_memmap->map[i].node_id;
- mem_type = loongson_memmap->map[i].mem_type;
-
- if (node_id == 0) {
- switch (mem_type) {
- case SYSTEM_RAM_LOW:
- add_memory_region(loongson_memmap->map[i].mem_start,
- (u64)loongson_memmap->map[i].mem_size << 20,
- BOOT_MEM_RAM);
- break;
- case SYSTEM_RAM_HIGH:
- add_memory_region(loongson_memmap->map[i].mem_start,
- (u64)loongson_memmap->map[i].mem_size << 20,
- BOOT_MEM_RAM);
- break;
- case MEM_RESERVED:
- add_memory_region(loongson_memmap->map[i].mem_start,
- (u64)loongson_memmap->map[i].mem_size << 20,
- BOOT_MEM_RESERVED);
- break;
- }
- }
- }
-}
-
-#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */
-
-/* override of arch/mips/mm/cache.c: __uncached_access */
-int __uncached_access(struct file *file, unsigned long addr)
-{
- if (file->f_flags & O_DSYNC)
- return 1;
-
- return addr >= __pa(high_memory) ||
- ((addr >= LOONGSON_MMIO_MEM_START) &&
- (addr < LOONGSON_MMIO_MEM_END));
-}
-
-#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED
-
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <asm/current.h>
-
-static unsigned long uca_start, uca_end;
-
-pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
- unsigned long size, pgprot_t vma_prot)
-{
- unsigned long offset = pfn << PAGE_SHIFT;
- unsigned long end = offset + size;
-
- if (__uncached_access(file, offset)) {
- if (uca_start && (offset >= uca_start) &&
- (end <= uca_end))
- return __pgprot((pgprot_val(vma_prot) &
- ~_CACHE_MASK) |
- _CACHE_UNCACHED_ACCELERATED);
- else
- return pgprot_noncached(vma_prot);
- }
- return vma_prot;
-}
-
-static int __init find_vga_mem_init(void)
-{
- struct pci_dev *dev = 0;
- struct resource *r;
- int idx;
-
- if (uca_start)
- return 0;
-
- for_each_pci_dev(dev) {
- if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
- for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
- r = &dev->resource[idx];
- if (!r->start && r->end)
- continue;
- if (r->flags & IORESOURCE_IO)
- continue;
- if (r->flags & IORESOURCE_MEM) {
- uca_start = r->start;
- uca_end = r->end;
- return 0;
- }
- }
- }
- }
-
- return 0;
-}
-
-late_initcall(find_vga_mem_init);
-#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */
+++ /dev/null
-/*
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/pci.h>
-
-#include <pci.h>
-#include <loongson.h>
-#include <boot_param.h>
-
-static struct resource loongson_pci_mem_resource = {
- .name = "pci memory space",
- .start = LOONGSON_PCI_MEM_START,
- .end = LOONGSON_PCI_MEM_END,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource loongson_pci_io_resource = {
- .name = "pci io space",
- .start = LOONGSON_PCI_IO_START,
- .end = IO_SPACE_LIMIT,
- .flags = IORESOURCE_IO,
-};
-
-static struct pci_controller loongson_pci_controller = {
- .pci_ops = &loongson_pci_ops,
- .io_resource = &loongson_pci_io_resource,
- .mem_resource = &loongson_pci_mem_resource,
- .mem_offset = 0x00000000UL,
- .io_offset = 0x00000000UL,
-};
-
-static void __init setup_pcimap(void)
-{
- /*
- * local to PCI mapping for CPU accessing PCI space
- * CPU address space [256M,448M] is window for accessing pci space
- * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M]
- *
- * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
- * [<2G] [384M,448M] [320M,384M] [0M,64M]
- */
- LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 |
- LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) |
- LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) |
- LOONGSON_PCIMAP_WIN(0, 0);
-
- /*
- * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
- */
- LOONGSON_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */
- /* size: 256M, burst transmission, pre-fetch enable, 64bit */
- LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
- LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
- LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */
- LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul;
- LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */
- LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul;
-
- /* avoid deadlock of PCI reading/writing lock operation */
- LOONGSON_PCI_ISR4C = 0xd2000001ul;
-
- /* can not change gnt to break pci transfer when device's gnt not
- deassert for some broken device */
- LOONGSON_PXARB_CFG = 0x00fe0105ul;
-
-#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
- /*
- * set cpu addr window2 to map CPU address space to PCI address space
- */
- LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC,
- LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE);
-#endif
-}
-
-extern int sbx00_acpi_init(void);
-
-static int __init pcibios_init(void)
-{
- setup_pcimap();
-
- loongson_pci_controller.io_map_base = mips_io_port_base;
-#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE
- loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr;
- loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr;
-#endif
- register_pci_controller(&loongson_pci_controller);
-
-#ifdef CONFIG_CPU_LOONGSON3
- sbx00_acpi_init();
-#endif
-
- return 0;
-}
-
-arch_initcall(pcibios_init);
+++ /dev/null
-/*
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/err.h>
-#include <linux/smp.h>
-#include <linux/platform_device.h>
-
-static struct platform_device loongson2_cpufreq_device = {
- .name = "loongson2_cpufreq",
- .id = -1,
-};
-
-static int __init loongson2_cpufreq_init(void)
-{
- struct cpuinfo_mips *c = ¤t_cpu_data;
-
- /* Only 2F revision and it's successors support CPUFreq */
- if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F)
- return platform_device_register(&loongson2_cpufreq_device);
-
- return -ENODEV;
-}
-
-arch_initcall(loongson2_cpufreq_init);
+++ /dev/null
-/*
- * loongson-specific suspend support
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin <wuzhangjin@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/suspend.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-
-#include <asm/i8259.h>
-#include <asm/mipsregs.h>
-
-#include <loongson.h>
-
-static unsigned int __maybe_unused cached_master_mask; /* i8259A */
-static unsigned int __maybe_unused cached_slave_mask;
-static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */
-
-void arch_suspend_disable_irqs(void)
-{
- /* disable all mips events */
- local_irq_disable();
-
-#ifdef CONFIG_I8259
- /* disable all events of i8259A */
- cached_slave_mask = inb(PIC_SLAVE_IMR);
- cached_master_mask = inb(PIC_MASTER_IMR);
-
- outb(0xff, PIC_SLAVE_IMR);
- inb(PIC_SLAVE_IMR);
- outb(0xff, PIC_MASTER_IMR);
- inb(PIC_MASTER_IMR);
-#endif
- /* disable all events of bonito */
- cached_bonito_irq_mask = LOONGSON_INTEN;
- LOONGSON_INTENCLR = 0xffff;
- (void)LOONGSON_INTENCLR;
-}
-
-void arch_suspend_enable_irqs(void)
-{
- /* enable all mips events */
- local_irq_enable();
-#ifdef CONFIG_I8259
- /* only enable the cached events of i8259A */
- outb(cached_slave_mask, PIC_SLAVE_IMR);
- outb(cached_master_mask, PIC_MASTER_IMR);
-#endif
- /* enable all cached events of bonito */
- LOONGSON_INTENSET = cached_bonito_irq_mask;
- (void)LOONGSON_INTENSET;
-}
-
-/*
- * Setup the board-specific events for waking up loongson from wait mode
- */
-void __weak setup_wakeup_events(void)
-{
-}
-
-/*
- * Check wakeup events
- */
-int __weak wakeup_loongson(void)
-{
- return 1;
-}
-
-/*
- * If the events are really what we want to wakeup the CPU, wake it up
- * otherwise put the CPU asleep again.
- */
-static void wait_for_wakeup_events(void)
-{
- while (!wakeup_loongson())
- LOONGSON_CHIPCFG(0) &= ~0x7;
-}
-
-/*
- * Stop all perf counters
- *
- * $24 is the control register of Loongson perf counter
- */
-static inline void stop_perf_counters(void)
-{
- __write_64bit_c0_register($24, 0, 0);
-}
-
-
-static void loongson_suspend_enter(void)
-{
- static unsigned int cached_cpu_freq;
-
- /* setup wakeup events via enabling the IRQs */
- setup_wakeup_events();
-
- stop_perf_counters();
-
- cached_cpu_freq = LOONGSON_CHIPCFG(0);
-
- /* Put CPU into wait mode */
- LOONGSON_CHIPCFG(0) &= ~0x7;
-
- /* wait for the given events to wakeup cpu from wait mode */
- wait_for_wakeup_events();
-
- LOONGSON_CHIPCFG(0) = cached_cpu_freq;
- mmiowb();
-}
-
-void __weak mach_suspend(void)
-{
-}
-
-void __weak mach_resume(void)
-{
-}
-
-static int loongson_pm_enter(suspend_state_t state)
-{
- mach_suspend();
-
- /* processor specific suspend */
- loongson_suspend_enter();
-
- mach_resume();
-
- return 0;
-}
-
-static int loongson_pm_valid_state(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_ON:
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- return 1;
-
- default:
- return 0;
- }
-}
-
-static const struct platform_suspend_ops loongson_pm_ops = {
- .valid = loongson_pm_valid_state,
- .enter = loongson_pm_enter,
-};
-
-static int __init loongson_pm_init(void)
-{
- suspend_set_ops(&loongson_pm_ops);
-
- return 0;
-}
-arch_initcall(loongson_pm_init);
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Zhangjin Wu, wuzhangjin@gmail.com
- */
-#include <linux/init.h>
-#include <linux/pm.h>
-
-#include <asm/idle.h>
-#include <asm/reboot.h>
-
-#include <loongson.h>
-#include <boot_param.h>
-
-static inline void loongson_reboot(void)
-{
-#ifndef CONFIG_CPU_JUMP_WORKAROUNDS
- ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
-#else
- void (*func)(void);
-
- func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4);
-
- __asm__ __volatile__(
- " .set noat \n"
- " jr %[func] \n"
- " .set at \n"
- : /* No outputs */
- : [func] "r" (func));
-#endif
-}
-
-static void loongson_restart(char *command)
-{
-#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
- /* do preparation for reboot */
- mach_prepare_reboot();
-
- /* reboot via jumping to boot base address */
- loongson_reboot();
-#else
- void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
-
- fw_restart();
- while (1) {
- if (cpu_wait)
- cpu_wait();
- }
-#endif
-}
-
-static void loongson_poweroff(void)
-{
-#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
- mach_prepare_shutdown();
- unreachable();
-#else
- void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
-
- fw_poweroff();
- while (1) {
- if (cpu_wait)
- cpu_wait();
- }
-#endif
-}
-
-static void loongson_halt(void)
-{
- pr_notice("\n\n** You can safely turn off the power now **\n\n");
- while (1) {
- if (cpu_wait)
- cpu_wait();
- }
-}
-
-static int __init mips_reboot_setup(void)
-{
- _machine_restart = loongson_restart;
- _machine_halt = loongson_halt;
- pm_power_off = loongson_poweroff;
-
- return 0;
-}
-
-arch_initcall(mips_reboot_setup);
+++ /dev/null
-/*
- * Lemote Fuloong platform support
- *
- * Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mc146818rtc.h>
-
-static struct resource loongson_rtc_resources[] = {
- {
- .start = RTC_PORT(0),
- .end = RTC_PORT(1),
- .flags = IORESOURCE_IO,
- }, {
- .start = RTC_IRQ,
- .end = RTC_IRQ,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device loongson_rtc_device = {
- .name = "rtc_cmos",
- .id = -1,
- .resource = loongson_rtc_resources,
- .num_resources = ARRAY_SIZE(loongson_rtc_resources),
-};
-
-
-static int __init loongson_rtc_platform_init(void)
-{
- platform_device_register(&loongson_rtc_device);
- return 0;
-}
-
-device_initcall(loongson_rtc_platform_init);
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Yan hua (yanhua@lemote.com)
- * Author: Wu Zhangjin (wuzhangjin@gmail.com)
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-#include <machine.h>
-
-#define PORT(int, clk) \
-{ \
- .irq = int, \
- .uartclk = clk, \
- .iotype = UPIO_PORT, \
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
- .regshift = 0, \
-}
-
-#define PORT_M(int, clk) \
-{ \
- .irq = MIPS_CPU_IRQ_BASE + (int), \
- .uartclk = clk, \
- .iotype = UPIO_MEM, \
- .membase = (void __iomem *)NULL, \
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
- .regshift = 0, \
-}
-
-static struct plat_serial8250_port uart8250_data[][MAX_UARTS + 1] = {
- [MACH_LOONGSON_UNKNOWN] = {},
- [MACH_LEMOTE_FL2E] = {PORT(4, 1843200), {} },
- [MACH_LEMOTE_FL2F] = {PORT(3, 1843200), {} },
- [MACH_LEMOTE_ML2F7] = {PORT_M(3, 3686400), {} },
- [MACH_LEMOTE_YL2F89] = {PORT_M(3, 3686400), {} },
- [MACH_DEXXON_GDIUM2F10] = {PORT_M(3, 3686400), {} },
- [MACH_LEMOTE_NAS] = {PORT_M(3, 3686400), {} },
- [MACH_LEMOTE_LL2F] = {PORT(3, 1843200), {} },
- [MACH_LOONGSON_GENERIC] = {PORT_M(2, 25000000), {} },
- [MACH_LOONGSON_END] = {},
-};
-
-static struct platform_device uart8250_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
-};
-
-static int __init serial_init(void)
-{
- int i;
- unsigned char iotype;
-
- iotype = uart8250_data[mips_machtype][0].iotype;
-
- if (UPIO_MEM == iotype) {
- uart8250_data[mips_machtype][0].mapbase =
- loongson_uart_base[0];
- uart8250_data[mips_machtype][0].membase =
- (void __iomem *)_loongson_uart_base[0];
- }
- else if (UPIO_PORT == iotype)
- uart8250_data[mips_machtype][0].iobase =
- loongson_uart_base[0] - LOONGSON_PCIIO_BASE;
-
- if (loongson_sysconf.uarts[0].uartclk)
- uart8250_data[mips_machtype][0].uartclk =
- loongson_sysconf.uarts[0].uartclk;
-
- for (i = 1; i < loongson_sysconf.nr_uarts; i++) {
- iotype = loongson_sysconf.uarts[i].iotype;
- uart8250_data[mips_machtype][i].iotype = iotype;
- loongson_uart_base[i] = loongson_sysconf.uarts[i].uart_base;
-
- if (UPIO_MEM == iotype) {
- uart8250_data[mips_machtype][i].irq =
- MIPS_CPU_IRQ_BASE + loongson_sysconf.uarts[i].int_offset;
- uart8250_data[mips_machtype][i].mapbase =
- loongson_uart_base[i];
- uart8250_data[mips_machtype][i].membase =
- ioremap_nocache(loongson_uart_base[i], 8);
- } else if (UPIO_PORT == iotype) {
- uart8250_data[mips_machtype][i].irq =
- loongson_sysconf.uarts[i].int_offset;
- uart8250_data[mips_machtype][i].iobase =
- loongson_uart_base[i] - LOONGSON_PCIIO_BASE;
- }
-
- uart8250_data[mips_machtype][i].uartclk =
- loongson_sysconf.uarts[i].uartclk;
- uart8250_data[mips_machtype][i].flags =
- UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
- }
-
- memset(&uart8250_data[mips_machtype][loongson_sysconf.nr_uarts],
- 0, sizeof(struct plat_serial8250_port));
- uart8250_device.dev.platform_data = uart8250_data[mips_machtype];
-
- return platform_device_register(&uart8250_device);
-}
-
-device_initcall(serial_init);
+++ /dev/null
-/*
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/module.h>
-
-#include <asm/wbflush.h>
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-#ifdef CONFIG_VT
-#include <linux/console.h>
-#include <linux/screen_info.h>
-#endif
-
-static void wbflush_loongson(void)
-{
- asm(".set\tpush\n\t"
- ".set\tnoreorder\n\t"
- ".set mips3\n\t"
- "sync\n\t"
- "nop\n\t"
- ".set\tpop\n\t"
- ".set mips0\n\t");
-}
-
-void (*__wbflush)(void) = wbflush_loongson;
-EXPORT_SYMBOL(__wbflush);
-
-void __init plat_mem_setup(void)
-{
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
- conswitchp = &vga_con;
-
- screen_info = (struct screen_info) {
- .orig_x = 0,
- .orig_y = 25,
- .orig_video_cols = 80,
- .orig_video_lines = 25,
- .orig_video_isVGA = VIDEO_TYPE_VGAC,
- .orig_video_points = 16,
- };
-#elif defined(CONFIG_DUMMY_CONSOLE)
- conswitchp = &dummy_con;
-#endif
-#endif
-}
+++ /dev/null
-/*
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <asm/mc146818-time.h>
-#include <asm/time.h>
-#include <asm/hpet.h>
-
-#include <loongson.h>
-#include <cs5536/cs5536_mfgpt.h>
-
-void __init plat_time_init(void)
-{
- /* setup mips r4k timer */
- mips_hpt_frequency = cpu_clock_freq / 2;
-
-#ifdef CONFIG_RS780_HPET
- setup_hpet_timer();
-#else
- setup_mfgpt0_timer();
-#endif
-}
-
-void read_persistent_clock(struct timespec *ts)
-{
- ts->tv_sec = mc146818_get_cmos_time();
- ts->tv_nsec = 0;
-}
+++ /dev/null
-/*
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-/* raw */
-unsigned long loongson_uart_base[MAX_UARTS] = {};
-/* ioremapped */
-unsigned long _loongson_uart_base[MAX_UARTS] = {};
-
-EXPORT_SYMBOL(loongson_uart_base);
-EXPORT_SYMBOL(_loongson_uart_base);
-
-void prom_init_loongson_uart_base(void)
-{
- switch (mips_machtype) {
- case MACH_LOONGSON_GENERIC:
- /* The CPU provided serial port (CPU) */
- loongson_uart_base[0] = LOONGSON_REG_BASE + 0x1e0;
- break;
- case MACH_LEMOTE_FL2E:
- loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x3f8;
- break;
- case MACH_LEMOTE_FL2F:
- case MACH_LEMOTE_LL2F:
- loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x2f8;
- break;
- case MACH_LEMOTE_ML2F7:
- case MACH_LEMOTE_YL2F89:
- case MACH_DEXXON_GDIUM2F10:
- case MACH_LEMOTE_NAS:
- default:
- /* The CPU provided serial port (LPC) */
- loongson_uart_base[0] = LOONGSON_LIO1_BASE + 0x3f8;
- break;
- }
-
- _loongson_uart_base[0] =
- (unsigned long)ioremap_nocache(loongson_uart_base[0], 8);
-}
+++ /dev/null
-#
-# Makefile for Lemote Fuloong2e mini-PC board.
-#
-
-obj-y += irq.o reset.o
+++ /dev/null
-/*
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/interrupt.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/i8259.h>
-
-#include <loongson.h>
-
-static void i8259_irqdispatch(void)
-{
- int irq;
-
- irq = i8259_irq();
- if (irq >= 0)
- do_IRQ(irq);
- else
- spurious_interrupt();
-}
-
-asmlinkage void mach_irq_dispatch(unsigned int pending)
-{
- if (pending & CAUSEF_IP7)
- do_IRQ(MIPS_CPU_IRQ_BASE + 7);
- else if (pending & CAUSEF_IP6) /* perf counter loverflow */
- do_perfcnt_IRQ();
- else if (pending & CAUSEF_IP5)
- i8259_irqdispatch();
- else if (pending & CAUSEF_IP2)
- bonito_irqdispatch();
- else
- spurious_interrupt();
-}
-
-static struct irqaction cascade_irqaction = {
- .handler = no_action,
- .name = "cascade",
- .flags = IRQF_NO_THREAD,
-};
-
-void __init mach_init_irq(void)
-{
- /* init all controller
- * 0-15 ------> i8259 interrupt
- * 16-23 ------> mips cpu interrupt
- * 32-63 ------> bonito irq
- */
-
- /* most bonito irq should be level triggered */
- LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR |
- LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES;
-
- /* Sets the first-level interrupt dispatcher. */
- mips_cpu_irq_init();
- init_i8259_irqs();
- bonito_irq_init();
-
- /* bonito irq at IP2 */
- setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
- /* 8259 irq at IP5 */
- setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
-}
+++ /dev/null
-/* Board-specific reboot/shutdown routines
- * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <loongson.h>
-
-void mach_prepare_reboot(void)
-{
- LOONGSON_GENCFG &= ~(1 << 2);
- LOONGSON_GENCFG |= (1 << 2);
-}
-
-void mach_prepare_shutdown(void)
-{
-}
+++ /dev/null
-#
-# Makefile for lemote loongson2f family machines
-#
-
-obj-y += clock.o machtype.o irq.o reset.o ec_kb3310b.o
-
-#
-# Suspend Support
-#
-
-obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
+++ /dev/null
-/*
- * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology
- * Author: Yanhua, yanh@lemote.com
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-
-#include <asm/clock.h>
-#include <asm/mach-loongson/loongson.h>
-
-static LIST_HEAD(clock_list);
-static DEFINE_SPINLOCK(clock_lock);
-static DEFINE_MUTEX(clock_list_sem);
-
-/* Minimum CLK support */
-enum {
- DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT,
- DC_87PT, DC_DISABLE, DC_RESV
-};
-
-struct cpufreq_frequency_table loongson2_clockmod_table[] = {
- {0, DC_RESV, CPUFREQ_ENTRY_INVALID},
- {0, DC_ZERO, CPUFREQ_ENTRY_INVALID},
- {0, DC_25PT, 0},
- {0, DC_37PT, 0},
- {0, DC_50PT, 0},
- {0, DC_62PT, 0},
- {0, DC_75PT, 0},
- {0, DC_87PT, 0},
- {0, DC_DISABLE, 0},
- {0, DC_RESV, CPUFREQ_TABLE_END},
-};
-EXPORT_SYMBOL_GPL(loongson2_clockmod_table);
-
-static struct clk cpu_clk = {
- .name = "cpu_clk",
- .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
- .rate = 800000000,
-};
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- return &cpu_clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-static void propagate_rate(struct clk *clk)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &clock_list, node) {
- if (likely(clkp->parent != clk))
- continue;
- if (likely(clkp->ops && clkp->ops->recalc))
- clkp->ops->recalc(clkp);
- if (unlikely(clkp->flags & CLK_RATE_PROPAGATES))
- propagate_rate(clkp);
- }
-}
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return (unsigned long)clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int rate_khz = rate / 1000;
- struct cpufreq_frequency_table *pos;
- int ret = 0;
- int regval;
-
- if (likely(clk->ops && clk->ops->set_rate)) {
- unsigned long flags;
-
- spin_lock_irqsave(&clock_lock, flags);
- ret = clk->ops->set_rate(clk, rate, 0);
- spin_unlock_irqrestore(&clock_lock, flags);
- }
-
- if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
- propagate_rate(clk);
-
- cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table)
- if (rate_khz == pos->frequency)
- break;
- if (rate_khz != pos->frequency)
- return -ENOTSUPP;
-
- clk->rate = rate;
-
- regval = LOONGSON_CHIPCFG(0);
- regval = (regval & ~0x7) | (pos->driver_data - 1);
- LOONGSON_CHIPCFG(0) = regval;
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (likely(clk->ops && clk->ops->round_rate)) {
- unsigned long flags, rounded;
-
- spin_lock_irqsave(&clock_lock, flags);
- rounded = clk->ops->round_rate(clk, rate);
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return rounded;
- }
-
- return rate;
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
+++ /dev/null
-/*
- * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook
- *
- * Copyright (C) 2008 Lemote Inc.
- * Author: liujl <liujl@lemote.com>, 2008-04-20
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-
-#include "ec_kb3310b.h"
-
-static DEFINE_SPINLOCK(index_access_lock);
-static DEFINE_SPINLOCK(port_access_lock);
-
-unsigned char ec_read(unsigned short addr)
-{
- unsigned char value;
- unsigned long flags;
-
- spin_lock_irqsave(&index_access_lock, flags);
- outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
- outb((addr & 0x00ff), EC_IO_PORT_LOW);
- value = inb(EC_IO_PORT_DATA);
- spin_unlock_irqrestore(&index_access_lock, flags);
-
- return value;
-}
-EXPORT_SYMBOL_GPL(ec_read);
-
-void ec_write(unsigned short addr, unsigned char val)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&index_access_lock, flags);
- outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
- outb((addr & 0x00ff), EC_IO_PORT_LOW);
- outb(val, EC_IO_PORT_DATA);
- /* flush the write action */
- inb(EC_IO_PORT_DATA);
- spin_unlock_irqrestore(&index_access_lock, flags);
-}
-EXPORT_SYMBOL_GPL(ec_write);
-
-/*
- * This function is used for EC command writes and corresponding status queries.
- */
-int ec_query_seq(unsigned char cmd)
-{
- int timeout;
- unsigned char status;
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&port_access_lock, flags);
-
- /* make chip goto reset mode */
- udelay(EC_REG_DELAY);
- outb(cmd, EC_CMD_PORT);
- udelay(EC_REG_DELAY);
-
- /* check if the command is received by ec */
- timeout = EC_CMD_TIMEOUT;
- status = inb(EC_STS_PORT);
- while (timeout-- && (status & (1 << 1))) {
- status = inb(EC_STS_PORT);
- udelay(EC_REG_DELAY);
- }
-
- spin_unlock_irqrestore(&port_access_lock, flags);
-
- if (timeout <= 0) {
- printk(KERN_ERR "%s: deadable error : timeout...\n", __func__);
- ret = -EINVAL;
- } else
- printk(KERN_INFO
- "(%x/%d)ec issued command %d status : 0x%x\n",
- timeout, EC_CMD_TIMEOUT - timeout, cmd, status);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(ec_query_seq);
-
-/*
- * Send query command to EC to get the proper event number
- */
-int ec_query_event_num(void)
-{
- return ec_query_seq(CMD_GET_EVENT_NUM);
-}
-EXPORT_SYMBOL(ec_query_event_num);
-
-/*
- * Get event number from EC
- *
- * NOTE: This routine must follow the query_event_num function in the
- * interrupt.
- */
-int ec_get_event_num(void)
-{
- int timeout = 100;
- unsigned char value;
- unsigned char status;
-
- udelay(EC_REG_DELAY);
- status = inb(EC_STS_PORT);
- udelay(EC_REG_DELAY);
- while (timeout-- && !(status & (1 << 0))) {
- status = inb(EC_STS_PORT);
- udelay(EC_REG_DELAY);
- }
- if (timeout <= 0) {
- pr_info("%s: get event number timeout.\n", __func__);
-
- return -EINVAL;
- }
- value = inb(EC_DAT_PORT);
- udelay(EC_REG_DELAY);
-
- return value;
-}
-EXPORT_SYMBOL(ec_get_event_num);
+++ /dev/null
-/*
- * KB3310B Embedded Controller
- *
- * Copyright (C) 2008 Lemote Inc.
- * Author: liujl <liujl@lemote.com>, 2008-03-14
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _EC_KB3310B_H
-#define _EC_KB3310B_H
-
-extern unsigned char ec_read(unsigned short addr);
-extern void ec_write(unsigned short addr, unsigned char val);
-extern int ec_query_seq(unsigned char cmd);
-extern int ec_query_event_num(void);
-extern int ec_get_event_num(void);
-
-typedef int (*sci_handler) (int status);
-extern sci_handler yeeloong_report_lid_status;
-
-#define SCI_IRQ_NUM 0x0A
-
-/*
- * The following registers are determined by the EC index configuration.
- * 1, fill the PORT_HIGH as EC register high part.
- * 2, fill the PORT_LOW as EC register low part.
- * 3, fill the PORT_DATA as EC register write data or get the data from it.
- */
-#define EC_IO_PORT_HIGH 0x0381
-#define EC_IO_PORT_LOW 0x0382
-#define EC_IO_PORT_DATA 0x0383
-
-/*
- * EC delay time is 500us for register and status access
- */
-#define EC_REG_DELAY 500 /* unit : us */
-#define EC_CMD_TIMEOUT 0x1000
-
-/*
- * EC access port for SCI communication
- */
-#define EC_CMD_PORT 0x66
-#define EC_STS_PORT 0x66
-#define EC_DAT_PORT 0x62
-#define CMD_INIT_IDLE_MODE 0xdd
-#define CMD_EXIT_IDLE_MODE 0xdf
-#define CMD_INIT_RESET_MODE 0xd8
-#define CMD_REBOOT_SYSTEM 0x8c
-#define CMD_GET_EVENT_NUM 0x84
-#define CMD_PROGRAM_PIECE 0xda
-
-/* temperature & fan registers */
-#define REG_TEMPERATURE_VALUE 0xF458
-#define REG_FAN_AUTO_MAN_SWITCH 0xF459
-#define BIT_FAN_AUTO 0
-#define BIT_FAN_MANUAL 1
-#define REG_FAN_CONTROL 0xF4D2
-#define BIT_FAN_CONTROL_ON (1 << 0)
-#define BIT_FAN_CONTROL_OFF (0 << 0)
-#define REG_FAN_STATUS 0xF4DA
-#define BIT_FAN_STATUS_ON (1 << 0)
-#define BIT_FAN_STATUS_OFF (0 << 0)
-#define REG_FAN_SPEED_HIGH 0xFE22
-#define REG_FAN_SPEED_LOW 0xFE23
-#define REG_FAN_SPEED_LEVEL 0xF4CC
-/* fan speed divider */
-#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/
-
-/* battery registers */
-#define REG_BAT_DESIGN_CAP_HIGH 0xF77D
-#define REG_BAT_DESIGN_CAP_LOW 0xF77E
-#define REG_BAT_FULLCHG_CAP_HIGH 0xF780
-#define REG_BAT_FULLCHG_CAP_LOW 0xF781
-#define REG_BAT_DESIGN_VOL_HIGH 0xF782
-#define REG_BAT_DESIGN_VOL_LOW 0xF783
-#define REG_BAT_CURRENT_HIGH 0xF784
-#define REG_BAT_CURRENT_LOW 0xF785
-#define REG_BAT_VOLTAGE_HIGH 0xF786
-#define REG_BAT_VOLTAGE_LOW 0xF787
-#define REG_BAT_TEMPERATURE_HIGH 0xF788
-#define REG_BAT_TEMPERATURE_LOW 0xF789
-#define REG_BAT_RELATIVE_CAP_HIGH 0xF492
-#define REG_BAT_RELATIVE_CAP_LOW 0xF493
-#define REG_BAT_VENDOR 0xF4C4
-#define FLAG_BAT_VENDOR_SANYO 0x01
-#define FLAG_BAT_VENDOR_SIMPLO 0x02
-#define REG_BAT_CELL_COUNT 0xF4C6
-#define FLAG_BAT_CELL_3S1P 0x03
-#define FLAG_BAT_CELL_3S2P 0x06
-#define REG_BAT_CHARGE 0xF4A2
-#define FLAG_BAT_CHARGE_DISCHARGE 0x01
-#define FLAG_BAT_CHARGE_CHARGE 0x02
-#define FLAG_BAT_CHARGE_ACPOWER 0x00
-#define REG_BAT_STATUS 0xF4B0
-#define BIT_BAT_STATUS_LOW (1 << 5)
-#define BIT_BAT_STATUS_DESTROY (1 << 2)
-#define BIT_BAT_STATUS_FULL (1 << 1)
-#define BIT_BAT_STATUS_IN (1 << 0)
-#define REG_BAT_CHARGE_STATUS 0xF4B1
-#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2)
-#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1)
-#define REG_BAT_STATE 0xF482
-#define BIT_BAT_STATE_CHARGING (1 << 1)
-#define BIT_BAT_STATE_DISCHARGING (1 << 0)
-#define REG_BAT_POWER 0xF440
-#define BIT_BAT_POWER_S3 (1 << 2)
-#define BIT_BAT_POWER_ON (1 << 1)
-#define BIT_BAT_POWER_ACIN (1 << 0)
-
-/* other registers */
-/* Audio: rd/wr */
-#define REG_AUDIO_VOLUME 0xF46C
-#define REG_AUDIO_MUTE 0xF4E7
-#define REG_AUDIO_BEEP 0xF4D0
-/* USB port power or not: rd/wr */
-#define REG_USB0_FLAG 0xF461
-#define REG_USB1_FLAG 0xF462
-#define REG_USB2_FLAG 0xF463
-#define BIT_USB_FLAG_ON 1
-#define BIT_USB_FLAG_OFF 0
-/* LID */
-#define REG_LID_DETECT 0xF4BD
-#define BIT_LID_DETECT_ON 1
-#define BIT_LID_DETECT_OFF 0
-/* CRT */
-#define REG_CRT_DETECT 0xF4AD
-#define BIT_CRT_DETECT_PLUG 1
-#define BIT_CRT_DETECT_UNPLUG 0
-/* LCD backlight brightness adjust: 9 levels */
-#define REG_DISPLAY_BRIGHTNESS 0xF4F5
-/* Black screen Status */
-#define BIT_DISPLAY_LCD_ON 1
-#define BIT_DISPLAY_LCD_OFF 0
-/* LCD backlight control: off/restore */
-#define REG_BACKLIGHT_CTRL 0xF7BD
-#define BIT_BACKLIGHT_ON 1
-#define BIT_BACKLIGHT_OFF 0
-/* Reset the machine auto-clear: rd/wr */
-#define REG_RESET 0xF4EC
-#define BIT_RESET_ON 1
-/* Light the led: rd/wr */
-#define REG_LED 0xF4C8
-#define BIT_LED_RED_POWER (1 << 0)
-#define BIT_LED_ORANGE_POWER (1 << 1)
-#define BIT_LED_GREEN_CHARGE (1 << 2)
-#define BIT_LED_RED_CHARGE (1 << 3)
-#define BIT_LED_NUMLOCK (1 << 4)
-/* Test led mode, all led on/off */
-#define REG_LED_TEST 0xF4C2
-#define BIT_LED_TEST_IN 1
-#define BIT_LED_TEST_OUT 0
-/* Camera on/off */
-#define REG_CAMERA_STATUS 0xF46A
-#define BIT_CAMERA_STATUS_ON 1
-#define BIT_CAMERA_STATUS_OFF 0
-#define REG_CAMERA_CONTROL 0xF7B7
-#define BIT_CAMERA_CONTROL_OFF 0
-#define BIT_CAMERA_CONTROL_ON 1
-/* Wlan Status */
-#define REG_WLAN 0xF4FA
-#define BIT_WLAN_ON 1
-#define BIT_WLAN_OFF 0
-#define REG_DISPLAY_LCD 0xF79F
-
-/* SCI Event Number from EC */
-enum {
- EVENT_LID = 0x23, /* LID open/close */
- EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */
- EVENT_SLEEP, /* Fn+F1 for entering sleep mode */
- EVENT_OVERTEMP, /* Over-temperature happened */
- EVENT_CRT_DETECT, /* CRT is connected */
- EVENT_CAMERA, /* Camera on/off */
- EVENT_USB_OC2, /* USB2 Over Current occurred */
- EVENT_USB_OC0, /* USB0 Over Current occurred */
- EVENT_BLACK_SCREEN, /* Turn on/off backlight */
- EVENT_AUDIO_MUTE, /* Mute on/off */
- EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */
- EVENT_AC_BAT, /* AC & Battery relative issue */
- EVENT_AUDIO_VOLUME, /* Volume adjust */
- EVENT_WLAN, /* Wlan on/off */
- EVENT_END
-};
-
-#endif /* !_EC_KB3310B_H */
+++ /dev/null
-/*
- * Copyright (C) 2007 Lemote Inc.
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/i8259.h>
-#include <asm/mipsregs.h>
-
-#include <loongson.h>
-#include <machine.h>
-
-#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */
-#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */
-#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */
-#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */
-
-#define LOONGSON_INT_BIT_INT0 (1 << 11)
-#define LOONGSON_INT_BIT_INT1 (1 << 12)
-
-/*
- * The generic i8259_irq() make the kernel hang on booting. Since we cannot
- * get the irq via the IRR directly, we access the ISR instead.
- */
-int mach_i8259_irq(void)
-{
- int irq, isr;
-
- irq = -1;
-
- if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) {
- raw_spin_lock(&i8259A_lock);
- isr = inb(PIC_MASTER_CMD) &
- ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR);
- if (!isr)
- isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8;
- irq = ffs(isr) - 1;
- if (unlikely(irq == 7)) {
- /*
- * This may be a spurious interrupt.
- *
- * Read the interrupt status register (ISR). If the most
- * significant bit is not set then there is no valid
- * interrupt.
- */
- outb(0x0B, PIC_MASTER_ISR); /* ISR register */
- if (~inb(PIC_MASTER_ISR) & 0x80)
- irq = -1;
- }
- raw_spin_unlock(&i8259A_lock);
- }
-
- return irq;
-}
-EXPORT_SYMBOL(mach_i8259_irq);
-
-static void i8259_irqdispatch(void)
-{
- int irq;
-
- irq = mach_i8259_irq();
- if (irq >= 0)
- do_IRQ(irq);
- else
- spurious_interrupt();
-}
-
-void mach_irq_dispatch(unsigned int pending)
-{
- if (pending & CAUSEF_IP7)
- do_IRQ(LOONGSON_TIMER_IRQ);
- else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */
- do_perfcnt_IRQ();
- bonito_irqdispatch();
- } else if (pending & CAUSEF_IP3) /* CPU UART */
- do_IRQ(LOONGSON_UART_IRQ);
- else if (pending & CAUSEF_IP2) /* South Bridge */
- i8259_irqdispatch();
- else
- spurious_interrupt();
-}
-
-static irqreturn_t ip6_action(int cpl, void *dev_id)
-{
- return IRQ_HANDLED;
-}
-
-static struct irqaction ip6_irqaction = {
- .handler = ip6_action,
- .name = "cascade",
- .flags = IRQF_SHARED | IRQF_NO_THREAD,
-};
-
-static struct irqaction cascade_irqaction = {
- .handler = no_action,
- .name = "cascade",
- .flags = IRQF_NO_THREAD,
-};
-
-void __init mach_init_irq(void)
-{
- /* init all controller
- * 0-15 ------> i8259 interrupt
- * 16-23 ------> mips cpu interrupt
- * 32-63 ------> bonito irq
- */
-
- /* setup cs5536 as high level trigger */
- LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
- LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
-
- /* Sets the first-level interrupt dispatcher. */
- mips_cpu_irq_init();
- init_i8259_irqs();
- bonito_irq_init();
-
- /* setup north bridge irq (bonito) */
- setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
- /* setup source bridge irq (i8259) */
- setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
-}
+++ /dev/null
-/*
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-void __init mach_prom_init_machtype(void)
-{
- /* We share the same kernel image file among Lemote 2F family
- * of machines, and provide the machtype= kernel command line
- * to users to indicate their machine, this command line will
- * be passed by the latest PMON automatically. and fortunately,
- * up to now, we can get the machine type from the PMON_VER=
- * commandline directly except the NAS machine, In the old
- * machines, this will help the users a lot.
- *
- * If no "machtype=" passed, get machine type from "PMON_VER=".
- * PMON_VER=LM8089 Lemote 8.9'' netbook
- * LM8101 Lemote 10.1'' netbook
- * (The above two netbooks have the same kernel support)
- * LM6XXX Lemote FuLoong(2F) box series
- * LM9XXX Lemote LynLoong PC series
- */
- if (strstr(arcs_cmdline, "PMON_VER=LM")) {
- if (strstr(arcs_cmdline, "PMON_VER=LM8"))
- mips_machtype = MACH_LEMOTE_YL2F89;
- else if (strstr(arcs_cmdline, "PMON_VER=LM6"))
- mips_machtype = MACH_LEMOTE_FL2F;
- else if (strstr(arcs_cmdline, "PMON_VER=LM9"))
- mips_machtype = MACH_LEMOTE_LL2F;
- else
- mips_machtype = MACH_LEMOTE_NAS;
-
- strcat(arcs_cmdline, " machtype=");
- strcat(arcs_cmdline, get_system_type());
- strcat(arcs_cmdline, " ");
- }
-}
+++ /dev/null
-/*
- * Lemote loongson2f family machines' specific suspend support
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin <wuzhangjin@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/suspend.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-#include <linux/i8042.h>
-#include <linux/module.h>
-
-#include <asm/i8259.h>
-#include <asm/mipsregs.h>
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-#include <cs5536/cs5536_mfgpt.h>
-#include "ec_kb3310b.h"
-
-#define I8042_KBD_IRQ 1
-#define I8042_CTR_KBDINT 0x01
-#define I8042_CTR_KBDDIS 0x10
-
-static unsigned char i8042_ctr;
-
-static int i8042_enable_kbd_port(void)
-{
- if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
- pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port."
- "\n");
- return -EIO;
- }
-
- i8042_ctr &= ~I8042_CTR_KBDDIS;
- i8042_ctr |= I8042_CTR_KBDINT;
-
- if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
- i8042_ctr &= ~I8042_CTR_KBDINT;
- i8042_ctr |= I8042_CTR_KBDDIS;
- pr_err("i8042.c: Failed to enable KBD port.\n");
-
- return -EIO;
- }
-
- return 0;
-}
-
-void setup_wakeup_events(void)
-{
- int irq_mask;
-
- switch (mips_machtype) {
- case MACH_LEMOTE_ML2F7:
- case MACH_LEMOTE_YL2F89:
- /* open the keyboard irq in i8259A */
- outb((0xff & ~(1 << I8042_KBD_IRQ)), PIC_MASTER_IMR);
- irq_mask = inb(PIC_MASTER_IMR);
-
- /* enable keyboard port */
- i8042_enable_kbd_port();
-
- /* Wakeup CPU via SCI lid open event */
- outb(irq_mask & ~(1 << PIC_CASCADE_IR), PIC_MASTER_IMR);
- inb(PIC_MASTER_IMR);
- outb(0xff & ~(1 << (SCI_IRQ_NUM - 8)), PIC_SLAVE_IMR);
- inb(PIC_SLAVE_IMR);
-
- break;
-
- default:
- break;
- }
-}
-
-static struct delayed_work lid_task;
-static int initialized;
-/* yeeloong_report_lid_status will be implemented in yeeloong_laptop.c */
-sci_handler yeeloong_report_lid_status;
-EXPORT_SYMBOL(yeeloong_report_lid_status);
-static void yeeloong_lid_update_task(struct work_struct *work)
-{
- if (yeeloong_report_lid_status)
- yeeloong_report_lid_status(BIT_LID_DETECT_ON);
-}
-
-int wakeup_loongson(void)
-{
- int irq;
-
- /* query the interrupt number */
- irq = mach_i8259_irq();
- if (irq < 0)
- return 0;
-
- printk(KERN_INFO "%s: irq = %d\n", __func__, irq);
-
- if (irq == I8042_KBD_IRQ)
- return 1;
- else if (irq == SCI_IRQ_NUM) {
- int ret, sci_event;
- /* query the event number */
- ret = ec_query_seq(CMD_GET_EVENT_NUM);
- if (ret < 0)
- return 0;
- sci_event = ec_get_event_num();
- if (sci_event < 0)
- return 0;
- if (sci_event == EVENT_LID) {
- int lid_status;
- /* check the LID status */
- lid_status = ec_read(REG_LID_DETECT);
- /* wakeup cpu when people open the LID */
- if (lid_status == BIT_LID_DETECT_ON) {
- /* If we call it directly here, the WARNING
- * will be sent out by getnstimeofday
- * via "WARN_ON(timekeeping_suspended);"
- * because we can not schedule in suspend mode.
- */
- if (initialized == 0) {
- INIT_DELAYED_WORK(&lid_task,
- yeeloong_lid_update_task);
- initialized = 1;
- }
- schedule_delayed_work(&lid_task, 1);
- return 1;
- }
- }
- }
-
- return 0;
-}
-
-void __weak mach_suspend(void)
-{
- disable_mfgpt0_counter();
-}
-
-void __weak mach_resume(void)
-{
- enable_mfgpt0_counter();
-}
+++ /dev/null
-/* Board-specific reboot/shutdown routines
- *
- * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-#include <cs5536/cs5536.h>
-#include "ec_kb3310b.h"
-
-static void reset_cpu(void)
-{
- /*
- * reset cpu to full speed, this is needed when enabling cpu frequency
- * scalling
- */
- LOONGSON_CHIPCFG(0) |= 0x7;
-}
-
-/* reset support for fuloong2f */
-
-static void fl2f_reboot(void)
-{
- reset_cpu();
-
- /* send a reset signal to south bridge.
- *
- * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset
- * normally with this reset operation and it will not work in PMON, but
- * you can type halt command and then reboot, seems the hardware reset
- * logic not work normally.
- */
- {
- u32 hi, lo;
- _rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo);
- lo |= 0x00000001;
- _wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo);
- }
-}
-
-static void fl2f_shutdown(void)
-{
- u32 hi, lo, val;
- int gpio_base;
-
- /* get gpio base */
- _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo);
- gpio_base = lo & 0xff00;
-
- /* make cs5536 gpio13 output enable */
- val = inl(gpio_base + GPIOL_OUT_EN);
- val &= ~(1 << (16 + 13));
- val |= (1 << 13);
- outl(val, gpio_base + GPIOL_OUT_EN);
- mmiowb();
- /* make cs5536 gpio13 output low level voltage. */
- val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13));
- val |= (1 << (16 + 13));
- outl(val, gpio_base + GPIOL_OUT_VAL);
- mmiowb();
-}
-
-/* reset support for yeeloong2f and mengloong2f notebook */
-
-static void ml2f_reboot(void)
-{
- reset_cpu();
-
- /* sending an reset signal to EC(embedded controller) */
- ec_write(REG_RESET, BIT_RESET_ON);
-}
-
-#define yl2f89_reboot ml2f_reboot
-
-/* menglong(7inches) laptop has different shutdown logic from 8.9inches */
-#define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d
-#define EC_SHUTDOWN_IO_PORT_LOW 0xff2e
-#define EC_SHUTDOWN_IO_PORT_DATA 0xff2f
-#define REG_SHUTDOWN_HIGH 0xFC
-#define REG_SHUTDOWN_LOW 0x29
-#define BIT_SHUTDOWN_ON (1 << 1)
-
-static void ml2f_shutdown(void)
-{
- u8 val;
- u64 i;
-
- outb(REG_SHUTDOWN_HIGH, EC_SHUTDOWN_IO_PORT_HIGH);
- outb(REG_SHUTDOWN_LOW, EC_SHUTDOWN_IO_PORT_LOW);
- mmiowb();
- val = inb(EC_SHUTDOWN_IO_PORT_DATA);
- outb(val & (~BIT_SHUTDOWN_ON), EC_SHUTDOWN_IO_PORT_DATA);
- mmiowb();
- /* need enough wait here... how many microseconds needs? */
- for (i = 0; i < 0x10000; i++)
- delay();
- outb(val | BIT_SHUTDOWN_ON, EC_SHUTDOWN_IO_PORT_DATA);
- mmiowb();
-}
-
-static void yl2f89_shutdown(void)
-{
- /* cpu-gpio0 output low */
- LOONGSON_GPIODATA &= ~0x00000001;
- /* cpu-gpio0 as output */
- LOONGSON_GPIOIE &= ~0x00000001;
-}
-
-void mach_prepare_reboot(void)
-{
- switch (mips_machtype) {
- case MACH_LEMOTE_FL2F:
- case MACH_LEMOTE_NAS:
- case MACH_LEMOTE_LL2F:
- fl2f_reboot();
- break;
- case MACH_LEMOTE_ML2F7:
- ml2f_reboot();
- break;
- case MACH_LEMOTE_YL2F89:
- yl2f89_reboot();
- break;
- default:
- break;
- }
-}
-
-void mach_prepare_shutdown(void)
-{
- switch (mips_machtype) {
- case MACH_LEMOTE_FL2F:
- case MACH_LEMOTE_NAS:
- case MACH_LEMOTE_LL2F:
- fl2f_shutdown();
- break;
- case MACH_LEMOTE_ML2F7:
- ml2f_shutdown();
- break;
- case MACH_LEMOTE_YL2F89:
- yl2f89_shutdown();
- break;
- default:
- break;
- }
-}
+++ /dev/null
-#
-# Makefile for Loongson-3 family machines
-#
-obj-y += irq.o cop2-ex.o platform.o
-
-obj-$(CONFIG_SMP) += smp.o
-
-obj-$(CONFIG_NUMA) += numa.o
-
-obj-$(CONFIG_RS780_HPET) += hpet.o
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2014 Lemote Corporation.
- * written by Huacai Chen <chenhc@lemote.com>
- *
- * based on arch/mips/cavium-octeon/cpu.c
- * Copyright (C) 2009 Wind River Systems,
- * written by Ralf Baechle <ralf@linux-mips.org>
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/notifier.h>
-
-#include <asm/fpu.h>
-#include <asm/cop2.h>
-#include <asm/current.h>
-#include <asm/mipsregs.h>
-
-static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action,
- void *data)
-{
- int fpu_owned;
- int fr = !test_thread_flag(TIF_32BIT_FPREGS);
-
- switch (action) {
- case CU2_EXCEPTION:
- preempt_disable();
- fpu_owned = __is_fpu_owner();
- if (!fr)
- set_c0_status(ST0_CU1 | ST0_CU2);
- else
- set_c0_status(ST0_CU1 | ST0_CU2 | ST0_FR);
- enable_fpu_hazard();
- KSTK_STATUS(current) |= (ST0_CU1 | ST0_CU2);
- if (fr)
- KSTK_STATUS(current) |= ST0_FR;
- else
- KSTK_STATUS(current) &= ~ST0_FR;
- /* If FPU is owned, we needn't init or restore fp */
- if (!fpu_owned) {
- set_thread_flag(TIF_USEDFPU);
- if (!used_math()) {
- _init_fpu(current->thread.fpu.fcr31);
- set_used_math();
- } else
- _restore_fp(current);
- }
- preempt_enable();
-
- return NOTIFY_STOP; /* Don't call default notifier */
- }
-
- return NOTIFY_OK; /* Let default notifier send signals */
-}
-
-static int __init loongson_cu2_setup(void)
-{
- return cu2_notifier(loongson_cu2_call, 0);
-}
-early_initcall(loongson_cu2_setup);
+++ /dev/null
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/percpu.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-
-#include <asm/hpet.h>
-#include <asm/time.h>
-
-#define SMBUS_CFG_BASE (loongson_sysconf.ht_control_base + 0x0300a000)
-#define SMBUS_PCI_REG40 0x40
-#define SMBUS_PCI_REG64 0x64
-#define SMBUS_PCI_REGB4 0xb4
-
-static DEFINE_SPINLOCK(hpet_lock);
-DEFINE_PER_CPU(struct clock_event_device, hpet_clockevent_device);
-
-static unsigned int smbus_read(int offset)
-{
- return *(volatile unsigned int *)(SMBUS_CFG_BASE + offset);
-}
-
-static void smbus_write(int offset, int data)
-{
- *(volatile unsigned int *)(SMBUS_CFG_BASE + offset) = data;
-}
-
-static void smbus_enable(int offset, int bit)
-{
- unsigned int cfg = smbus_read(offset);
-
- cfg |= bit;
- smbus_write(offset, cfg);
-}
-
-static int hpet_read(int offset)
-{
- return *(volatile unsigned int *)(HPET_MMIO_ADDR + offset);
-}
-
-static void hpet_write(int offset, int data)
-{
- *(volatile unsigned int *)(HPET_MMIO_ADDR + offset) = data;
-}
-
-static void hpet_start_counter(void)
-{
- unsigned int cfg = hpet_read(HPET_CFG);
-
- cfg |= HPET_CFG_ENABLE;
- hpet_write(HPET_CFG, cfg);
-}
-
-static void hpet_stop_counter(void)
-{
- unsigned int cfg = hpet_read(HPET_CFG);
-
- cfg &= ~HPET_CFG_ENABLE;
- hpet_write(HPET_CFG, cfg);
-}
-
-static void hpet_reset_counter(void)
-{
- hpet_write(HPET_COUNTER, 0);
- hpet_write(HPET_COUNTER + 4, 0);
-}
-
-static void hpet_restart_counter(void)
-{
- hpet_stop_counter();
- hpet_reset_counter();
- hpet_start_counter();
-}
-
-static void hpet_enable_legacy_int(void)
-{
- /* Do nothing on Loongson-3 */
-}
-
-static void hpet_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- int cfg = 0;
-
- spin_lock(&hpet_lock);
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- pr_info("set clock event to periodic mode!\n");
- /* stop counter */
- hpet_stop_counter();
-
- /* enables the timer0 to generate a periodic interrupt */
- cfg = hpet_read(HPET_T0_CFG);
- cfg &= ~HPET_TN_LEVEL;
- cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
- HPET_TN_SETVAL | HPET_TN_32BIT;
- hpet_write(HPET_T0_CFG, cfg);
-
- /* set the comparator */
- hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL);
- udelay(1);
- hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL);
-
- /* start counter */
- hpet_start_counter();
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- cfg = hpet_read(HPET_T0_CFG);
- cfg &= ~HPET_TN_ENABLE;
- hpet_write(HPET_T0_CFG, cfg);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- pr_info("set clock event to one shot mode!\n");
- cfg = hpet_read(HPET_T0_CFG);
- /* set timer0 type
- * 1 : periodic interrupt
- * 0 : non-periodic(oneshot) interrupt
- */
- cfg &= ~HPET_TN_PERIODIC;
- cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
- hpet_write(HPET_T0_CFG, cfg);
- break;
- case CLOCK_EVT_MODE_RESUME:
- hpet_enable_legacy_int();
- break;
- }
- spin_unlock(&hpet_lock);
-}
-
-static int hpet_next_event(unsigned long delta,
- struct clock_event_device *evt)
-{
- unsigned int cnt;
- int res;
-
- cnt = hpet_read(HPET_COUNTER);
- cnt += delta;
- hpet_write(HPET_T0_CMP, cnt);
-
- res = ((int)(hpet_read(HPET_COUNTER) - cnt) > 0) ? -ETIME : 0;
- return res;
-}
-
-static irqreturn_t hpet_irq_handler(int irq, void *data)
-{
- int is_irq;
- struct clock_event_device *cd;
- unsigned int cpu = smp_processor_id();
-
- is_irq = hpet_read(HPET_STATUS);
- if (is_irq & HPET_T0_IRS) {
- /* clear the TIMER0 irq status register */
- hpet_write(HPET_STATUS, HPET_T0_IRS);
- cd = &per_cpu(hpet_clockevent_device, cpu);
- cd->event_handler(cd);
- return IRQ_HANDLED;
- }
- return IRQ_NONE;
-}
-
-static struct irqaction hpet_irq = {
- .handler = hpet_irq_handler,
- .flags = IRQF_NOBALANCING | IRQF_TIMER,
- .name = "hpet",
-};
-
-/*
- * hpet address assignation and irq setting should be done in bios.
- * but pmon don't do this, we just setup here directly.
- * The operation under is normal. unfortunately, hpet_setup process
- * is before pci initialize.
- *
- * {
- * struct pci_dev *pdev;
- *
- * pdev = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
- * pci_write_config_word(pdev, SMBUS_PCI_REGB4, HPET_ADDR);
- *
- * ...
- * }
- */
-static void hpet_setup(void)
-{
- /* set hpet base address */
- smbus_write(SMBUS_PCI_REGB4, HPET_ADDR);
-
- /* enable decodeing of access to HPET MMIO*/
- smbus_enable(SMBUS_PCI_REG40, (1 << 28));
-
- /* HPET irq enable */
- smbus_enable(SMBUS_PCI_REG64, (1 << 10));
-
- hpet_enable_legacy_int();
-}
-
-void __init setup_hpet_timer(void)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd;
-
- hpet_setup();
-
- cd = &per_cpu(hpet_clockevent_device, cpu);
- cd->name = "hpet";
- cd->rating = 320;
- cd->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
- cd->set_mode = hpet_set_mode;
- cd->set_next_event = hpet_next_event;
- cd->irq = HPET_T0_IRQ;
- cd->cpumask = cpumask_of(cpu);
- clockevent_set_clock(cd, HPET_FREQ);
- cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
- cd->min_delta_ns = 5000;
-
- clockevents_register_device(cd);
- setup_irq(HPET_T0_IRQ, &hpet_irq);
- pr_info("hpet clock event device register\n");
-}
-
-static cycle_t hpet_read_counter(struct clocksource *cs)
-{
- return (cycle_t)hpet_read(HPET_COUNTER);
-}
-
-static void hpet_suspend(struct clocksource *cs)
-{
-}
-
-static void hpet_resume(struct clocksource *cs)
-{
- hpet_setup();
- hpet_restart_counter();
-}
-
-static struct clocksource csrc_hpet = {
- .name = "hpet",
- /* mips clocksource rating is less than 300, so hpet is better. */
- .rating = 300,
- .read = hpet_read_counter,
- .mask = CLOCKSOURCE_MASK(32),
- /* oneshot mode work normal with this flag */
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
- .suspend = hpet_suspend,
- .resume = hpet_resume,
- .mult = 0,
- .shift = 10,
-};
-
-int __init init_hpet_clocksource(void)
-{
- csrc_hpet.mult = clocksource_hz2mult(HPET_FREQ, csrc_hpet.shift);
- return clocksource_register_hz(&csrc_hpet, HPET_FREQ);
-}
-
-arch_initcall(init_hpet_clocksource);
+++ /dev/null
-#include <loongson.h>
-#include <irq.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/i8259.h>
-#include <asm/mipsregs.h>
-
-#include "smp.h"
-
-unsigned int ht_irq[] = {0, 1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
-
-static void ht_irqdispatch(void)
-{
- unsigned int i, irq;
-
- irq = LOONGSON_HT1_INT_VECTOR(0);
- LOONGSON_HT1_INT_VECTOR(0) = irq; /* Acknowledge the IRQs */
-
- for (i = 0; i < ARRAY_SIZE(ht_irq); i++) {
- if (irq & (0x1 << ht_irq[i]))
- do_IRQ(ht_irq[i]);
- }
-}
-
-void mach_irq_dispatch(unsigned int pending)
-{
- if (pending & CAUSEF_IP7)
- do_IRQ(LOONGSON_TIMER_IRQ);
-#if defined(CONFIG_SMP)
- else if (pending & CAUSEF_IP6)
- loongson3_ipi_interrupt(NULL);
-#endif
- else if (pending & CAUSEF_IP3)
- ht_irqdispatch();
- else if (pending & CAUSEF_IP2)
- do_IRQ(LOONGSON_UART_IRQ);
- else {
- pr_err("%s : spurious interrupt\n", __func__);
- spurious_interrupt();
- }
-}
-
-static struct irqaction cascade_irqaction = {
- .handler = no_action,
- .flags = IRQF_NO_SUSPEND,
- .name = "cascade",
-};
-
-static inline void mask_loongson_irq(struct irq_data *d)
-{
- clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
- irq_disable_hazard();
-
- /* Workaround: UART IRQ may deliver to any core */
- if (d->irq == LOONGSON_UART_IRQ) {
- int cpu = smp_processor_id();
- int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node;
- int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node;
- u64 intenclr_addr = smp_group[node_id] |
- (u64)(&LOONGSON_INT_ROUTER_INTENCLR);
- u64 introuter_lpc_addr = smp_group[node_id] |
- (u64)(&LOONGSON_INT_ROUTER_LPC);
-
- *(volatile u32 *)intenclr_addr = 1 << 10;
- *(volatile u8 *)introuter_lpc_addr = 0x10 + (1<<core_id);
- }
-}
-
-static inline void unmask_loongson_irq(struct irq_data *d)
-{
- /* Workaround: UART IRQ may deliver to any core */
- if (d->irq == LOONGSON_UART_IRQ) {
- int cpu = smp_processor_id();
- int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node;
- int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node;
- u64 intenset_addr = smp_group[node_id] |
- (u64)(&LOONGSON_INT_ROUTER_INTENSET);
- u64 introuter_lpc_addr = smp_group[node_id] |
- (u64)(&LOONGSON_INT_ROUTER_LPC);
-
- *(volatile u32 *)intenset_addr = 1 << 10;
- *(volatile u8 *)introuter_lpc_addr = 0x10 + (1<<core_id);
- }
-
- set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
- irq_enable_hazard();
-}
-
- /* For MIPS IRQs which shared by all cores */
-static struct irq_chip loongson_irq_chip = {
- .name = "Loongson",
- .irq_ack = mask_loongson_irq,
- .irq_mask = mask_loongson_irq,
- .irq_mask_ack = mask_loongson_irq,
- .irq_unmask = unmask_loongson_irq,
- .irq_eoi = unmask_loongson_irq,
-};
-
-void irq_router_init(void)
-{
- int i;
-
- /* route LPC int to cpu core0 int 0 */
- LOONGSON_INT_ROUTER_LPC =
- LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 0);
- /* route HT1 int0 ~ int7 to cpu core0 INT1*/
- for (i = 0; i < 8; i++)
- LOONGSON_INT_ROUTER_HT1(i) =
- LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 1);
- /* enable HT1 interrupt */
- LOONGSON_HT1_INTN_EN(0) = 0xffffffff;
- /* enable router interrupt intenset */
- LOONGSON_INT_ROUTER_INTENSET =
- LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10;
-}
-
-void __init mach_init_irq(void)
-{
- clear_c0_status(ST0_IM | ST0_BEV);
-
- irq_router_init();
- mips_cpu_irq_init();
- init_i8259_irqs();
- irq_set_chip_and_handler(LOONGSON_UART_IRQ,
- &loongson_irq_chip, handle_level_irq);
-
- /* setup HT1 irq */
- setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
-
- set_c0_status(STATUSF_IP2 | STATUSF_IP6);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-void fixup_irqs(void)
-{
- irq_cpu_offline();
- clear_c0_status(ST0_IM);
-}
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2010 Loongson Inc. & Lemote Inc. &
- * Insititute of Computing Technology
- * Author: Xiang Gao, gaoxiang@ict.ac.cn
- * Huacai Chen, chenhc@lemote.com
- * Xiaofu Meng, Shuangshuang Zhang
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/mmzone.h>
-#include <linux/module.h>
-#include <linux/nodemask.h>
-#include <linux/swap.h>
-#include <linux/memblock.h>
-#include <linux/bootmem.h>
-#include <linux/pfn.h>
-#include <linux/highmem.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/sections.h>
-#include <linux/irq.h>
-#include <asm/bootinfo.h>
-#include <asm/mc146818-time.h>
-#include <asm/time.h>
-#include <asm/wbflush.h>
-#include <boot_param.h>
-
-static struct node_data prealloc__node_data[MAX_NUMNODES];
-unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
-EXPORT_SYMBOL(__node_distances);
-struct node_data *__node_data[MAX_NUMNODES];
-EXPORT_SYMBOL(__node_data);
-
-static void enable_lpa(void)
-{
- unsigned long value;
-
- value = __read_32bit_c0_register($16, 3);
- value |= 0x00000080;
- __write_32bit_c0_register($16, 3, value);
- value = __read_32bit_c0_register($16, 3);
- pr_info("CP0_Config3: CP0 16.3 (0x%lx)\n", value);
-
- value = __read_32bit_c0_register($5, 1);
- value |= 0x20000000;
- __write_32bit_c0_register($5, 1, value);
- value = __read_32bit_c0_register($5, 1);
- pr_info("CP0_PageGrain: CP0 5.1 (0x%lx)\n", value);
-}
-
-static void cpu_node_probe(void)
-{
- int i;
-
- nodes_clear(node_possible_map);
- nodes_clear(node_online_map);
- for (i = 0; i < loongson_sysconf.nr_nodes; i++) {
- node_set_state(num_online_nodes(), N_POSSIBLE);
- node_set_online(num_online_nodes());
- }
-
- pr_info("NUMA: Discovered %d cpus on %d nodes\n",
- loongson_sysconf.nr_cpus, num_online_nodes());
-}
-
-static int __init compute_node_distance(int row, int col)
-{
- int package_row = row * loongson_sysconf.cores_per_node /
- loongson_sysconf.cores_per_package;
- int package_col = col * loongson_sysconf.cores_per_node /
- loongson_sysconf.cores_per_package;
-
- if (col == row)
- return 0;
- else if (package_row == package_col)
- return 40;
- else
- return 100;
-}
-
-static void __init init_topology_matrix(void)
-{
- int row, col;
-
- for (row = 0; row < MAX_NUMNODES; row++)
- for (col = 0; col < MAX_NUMNODES; col++)
- __node_distances[row][col] = -1;
-
- for_each_online_node(row) {
- for_each_online_node(col) {
- __node_distances[row][col] =
- compute_node_distance(row, col);
- }
- }
-}
-
-static unsigned long nid_to_addroffset(unsigned int nid)
-{
- unsigned long result;
- switch (nid) {
- case 0:
- default:
- result = NODE0_ADDRSPACE_OFFSET;
- break;
- case 1:
- result = NODE1_ADDRSPACE_OFFSET;
- break;
- case 2:
- result = NODE2_ADDRSPACE_OFFSET;
- break;
- case 3:
- result = NODE3_ADDRSPACE_OFFSET;
- break;
- }
- return result;
-}
-
-static void __init szmem(unsigned int node)
-{
- u32 i, mem_type;
- static unsigned long num_physpages = 0;
- u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
-
- /* Parse memory information and activate */
- for (i = 0; i < loongson_memmap->nr_map; i++) {
- node_id = loongson_memmap->map[i].node_id;
- if (node_id != node)
- continue;
-
- mem_type = loongson_memmap->map[i].mem_type;
- mem_size = loongson_memmap->map[i].mem_size;
- mem_start = loongson_memmap->map[i].mem_start;
-
- switch (mem_type) {
- case SYSTEM_RAM_LOW:
- start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
- node_psize = (mem_size << 20) >> PAGE_SHIFT;
- end_pfn = start_pfn + node_psize;
- num_physpages += node_psize;
- pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
- (u32)node_id, mem_type, mem_start, mem_size);
- pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
- start_pfn, end_pfn, num_physpages);
- add_memory_region((node_id << 44) + mem_start,
- (u64)mem_size << 20, BOOT_MEM_RAM);
- memblock_add_node(PFN_PHYS(start_pfn),
- PFN_PHYS(end_pfn - start_pfn), node);
- break;
- case SYSTEM_RAM_HIGH:
- start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
- node_psize = (mem_size << 20) >> PAGE_SHIFT;
- end_pfn = start_pfn + node_psize;
- num_physpages += node_psize;
- pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
- (u32)node_id, mem_type, mem_start, mem_size);
- pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
- start_pfn, end_pfn, num_physpages);
- add_memory_region((node_id << 44) + mem_start,
- (u64)mem_size << 20, BOOT_MEM_RAM);
- memblock_add_node(PFN_PHYS(start_pfn),
- PFN_PHYS(end_pfn - start_pfn), node);
- break;
- case MEM_RESERVED:
- pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
- (u32)node_id, mem_type, mem_start, mem_size);
- add_memory_region((node_id << 44) + mem_start,
- (u64)mem_size << 20, BOOT_MEM_RESERVED);
- memblock_reserve(((node_id << 44) + mem_start),
- mem_size << 20);
- break;
- }
- }
-}
-
-static void __init node_mem_init(unsigned int node)
-{
- unsigned long bootmap_size;
- unsigned long node_addrspace_offset;
- unsigned long start_pfn, end_pfn, freepfn;
-
- node_addrspace_offset = nid_to_addroffset(node);
- pr_info("Node%d's addrspace_offset is 0x%lx\n",
- node, node_addrspace_offset);
-
- get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
- freepfn = start_pfn;
- if (node == 0)
- freepfn = PFN_UP(__pa_symbol(&_end)); /* kernel end address */
- pr_info("Node%d: start_pfn=0x%lx, end_pfn=0x%lx, freepfn=0x%lx\n",
- node, start_pfn, end_pfn, freepfn);
-
- __node_data[node] = prealloc__node_data + node;
-
- NODE_DATA(node)->bdata = &bootmem_node_data[node];
- NODE_DATA(node)->node_start_pfn = start_pfn;
- NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
-
- bootmap_size = init_bootmem_node(NODE_DATA(node), freepfn,
- start_pfn, end_pfn);
- free_bootmem_with_active_regions(node, end_pfn);
- if (node == 0) /* used by finalize_initrd() */
- max_low_pfn = end_pfn;
-
- /* This is reserved for the kernel and bdata->node_bootmem_map */
- reserve_bootmem_node(NODE_DATA(node), start_pfn << PAGE_SHIFT,
- ((freepfn - start_pfn) << PAGE_SHIFT) + bootmap_size,
- BOOTMEM_DEFAULT);
-
- if (node == 0 && node_end_pfn(0) >= (0xffffffff >> PAGE_SHIFT)) {
- /* Reserve 0xff800000~0xffffffff for RS780E integrated GPU */
- reserve_bootmem_node(NODE_DATA(node),
- (node_addrspace_offset | 0xff800000),
- 8 << 20, BOOTMEM_DEFAULT);
- }
-
- sparse_memory_present_with_active_regions(node);
-}
-
-static __init void prom_meminit(void)
-{
- unsigned int node, cpu, active_cpu = 0;
-
- cpu_node_probe();
- init_topology_matrix();
-
- for (node = 0; node < loongson_sysconf.nr_nodes; node++) {
- if (node_online(node)) {
- szmem(node);
- node_mem_init(node);
- cpumask_clear(&__node_data[(node)]->cpumask);
- }
- }
- for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) {
- node = cpu / loongson_sysconf.cores_per_node;
- if (node >= num_online_nodes())
- node = 0;
-
- if (loongson_sysconf.reserved_cpus_mask & (1<<cpu))
- continue;
-
- cpumask_set_cpu(active_cpu, &__node_data[(node)]->cpumask);
- pr_info("NUMA: set cpumask cpu %d on node %d\n", active_cpu, node);
-
- active_cpu++;
- }
-}
-
-void __init paging_init(void)
-{
- unsigned node;
- unsigned long zones_size[MAX_NR_ZONES] = {0, };
-
- pagetable_init();
-
- for_each_online_node(node) {
- unsigned long start_pfn, end_pfn;
-
- get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
-
- if (end_pfn > max_low_pfn)
- max_low_pfn = end_pfn;
- }
-#ifdef CONFIG_ZONE_DMA32
- zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
-#endif
- zones_size[ZONE_NORMAL] = max_low_pfn;
- free_area_init_nodes(zones_size);
-}
-
-void __init mem_init(void)
-{
- high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT);
- free_all_bootmem();
- setup_zero_pages(); /* This comes from node 0 */
- mem_init_print_info(NULL);
-}
-
-/* All PCI device belongs to logical Node-0 */
-int pcibus_to_node(struct pci_bus *bus)
-{
- return 0;
-}
-EXPORT_SYMBOL(pcibus_to_node);
-
-void __init prom_init_numa_memory(void)
-{
- enable_lpa();
- prom_meminit();
-}
-EXPORT_SYMBOL(prom_init_numa_memory);
+++ /dev/null
-/*
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- * Xiang Yu, xiangy@lemote.com
- * Chen Huacai, chenhc@lemote.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <asm/bootinfo.h>
-#include <boot_param.h>
-#include <loongson_hwmon.h>
-#include <workarounds.h>
-
-static int __init loongson3_platform_init(void)
-{
- int i;
- struct platform_device *pdev;
-
- if (loongson_sysconf.ecname[0] != '\0')
- platform_device_register_simple(loongson_sysconf.ecname, -1, NULL, 0);
-
- for (i = 0; i < loongson_sysconf.nr_sensors; i++) {
- if (loongson_sysconf.sensors[i].type > SENSOR_FAN)
- continue;
-
- pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
- pdev->name = loongson_sysconf.sensors[i].name;
- pdev->id = loongson_sysconf.sensors[i].id;
- pdev->dev.platform_data = &loongson_sysconf.sensors[i];
- platform_device_register(pdev);
- }
-
- return 0;
-}
-
-arch_initcall(loongson3_platform_init);
+++ /dev/null
-/*
- * Copyright (C) 2010, 2011, 2012, Lemote, Inc.
- * Author: Chen Huacai, chenhc@lemote.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/cpufreq.h>
-#include <asm/processor.h>
-#include <asm/time.h>
-#include <asm/clock.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <loongson.h>
-#include <workarounds.h>
-
-#include "smp.h"
-
-DEFINE_PER_CPU(int, cpu_state);
-DEFINE_PER_CPU(uint32_t, core0_c0count);
-
-static void *ipi_set0_regs[16];
-static void *ipi_clear0_regs[16];
-static void *ipi_status0_regs[16];
-static void *ipi_en0_regs[16];
-static void *ipi_mailbox_buf[16];
-
-/* read a 32bit value from ipi register */
-#define loongson3_ipi_read32(addr) readl(addr)
-/* read a 64bit value from ipi register */
-#define loongson3_ipi_read64(addr) readq(addr)
-/* write a 32bit value to ipi register */
-#define loongson3_ipi_write32(action, addr) \
- do { \
- writel(action, addr); \
- __wbflush(); \
- } while (0)
-/* write a 64bit value to ipi register */
-#define loongson3_ipi_write64(action, addr) \
- do { \
- writeq(action, addr); \
- __wbflush(); \
- } while (0)
-
-static void ipi_set0_regs_init(void)
-{
- ipi_set0_regs[0] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + SET0);
- ipi_set0_regs[1] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + SET0);
- ipi_set0_regs[2] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + SET0);
- ipi_set0_regs[3] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + SET0);
- ipi_set0_regs[4] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + SET0);
- ipi_set0_regs[5] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + SET0);
- ipi_set0_regs[6] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + SET0);
- ipi_set0_regs[7] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + SET0);
- ipi_set0_regs[8] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + SET0);
- ipi_set0_regs[9] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + SET0);
- ipi_set0_regs[10] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + SET0);
- ipi_set0_regs[11] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + SET0);
- ipi_set0_regs[12] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + SET0);
- ipi_set0_regs[13] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + SET0);
- ipi_set0_regs[14] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + SET0);
- ipi_set0_regs[15] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + SET0);
-}
-
-static void ipi_clear0_regs_init(void)
-{
- ipi_clear0_regs[0] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + CLEAR0);
- ipi_clear0_regs[1] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + CLEAR0);
- ipi_clear0_regs[2] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + CLEAR0);
- ipi_clear0_regs[3] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + CLEAR0);
- ipi_clear0_regs[4] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + CLEAR0);
- ipi_clear0_regs[5] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + CLEAR0);
- ipi_clear0_regs[6] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + CLEAR0);
- ipi_clear0_regs[7] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + CLEAR0);
- ipi_clear0_regs[8] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + CLEAR0);
- ipi_clear0_regs[9] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + CLEAR0);
- ipi_clear0_regs[10] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + CLEAR0);
- ipi_clear0_regs[11] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + CLEAR0);
- ipi_clear0_regs[12] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + CLEAR0);
- ipi_clear0_regs[13] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + CLEAR0);
- ipi_clear0_regs[14] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + CLEAR0);
- ipi_clear0_regs[15] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + CLEAR0);
-}
-
-static void ipi_status0_regs_init(void)
-{
- ipi_status0_regs[0] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + STATUS0);
- ipi_status0_regs[1] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + STATUS0);
- ipi_status0_regs[2] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + STATUS0);
- ipi_status0_regs[3] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + STATUS0);
- ipi_status0_regs[4] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + STATUS0);
- ipi_status0_regs[5] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + STATUS0);
- ipi_status0_regs[6] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + STATUS0);
- ipi_status0_regs[7] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + STATUS0);
- ipi_status0_regs[8] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + STATUS0);
- ipi_status0_regs[9] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + STATUS0);
- ipi_status0_regs[10] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + STATUS0);
- ipi_status0_regs[11] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + STATUS0);
- ipi_status0_regs[12] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + STATUS0);
- ipi_status0_regs[13] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + STATUS0);
- ipi_status0_regs[14] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + STATUS0);
- ipi_status0_regs[15] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + STATUS0);
-}
-
-static void ipi_en0_regs_init(void)
-{
- ipi_en0_regs[0] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + EN0);
- ipi_en0_regs[1] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + EN0);
- ipi_en0_regs[2] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + EN0);
- ipi_en0_regs[3] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + EN0);
- ipi_en0_regs[4] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + EN0);
- ipi_en0_regs[5] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + EN0);
- ipi_en0_regs[6] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + EN0);
- ipi_en0_regs[7] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + EN0);
- ipi_en0_regs[8] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + EN0);
- ipi_en0_regs[9] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + EN0);
- ipi_en0_regs[10] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + EN0);
- ipi_en0_regs[11] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + EN0);
- ipi_en0_regs[12] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + EN0);
- ipi_en0_regs[13] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + EN0);
- ipi_en0_regs[14] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + EN0);
- ipi_en0_regs[15] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + EN0);
-}
-
-static void ipi_mailbox_buf_init(void)
-{
- ipi_mailbox_buf[0] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + BUF);
- ipi_mailbox_buf[1] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + BUF);
- ipi_mailbox_buf[2] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + BUF);
- ipi_mailbox_buf[3] = (void *)
- (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + BUF);
- ipi_mailbox_buf[4] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + BUF);
- ipi_mailbox_buf[5] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + BUF);
- ipi_mailbox_buf[6] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + BUF);
- ipi_mailbox_buf[7] = (void *)
- (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + BUF);
- ipi_mailbox_buf[8] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + BUF);
- ipi_mailbox_buf[9] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + BUF);
- ipi_mailbox_buf[10] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + BUF);
- ipi_mailbox_buf[11] = (void *)
- (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + BUF);
- ipi_mailbox_buf[12] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + BUF);
- ipi_mailbox_buf[13] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + BUF);
- ipi_mailbox_buf[14] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + BUF);
- ipi_mailbox_buf[15] = (void *)
- (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + BUF);
-}
-
-/*
- * Simple enough, just poke the appropriate ipi register
- */
-static void loongson3_send_ipi_single(int cpu, unsigned int action)
-{
- loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(cpu)]);
-}
-
-static void
-loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action)
-{
- unsigned int i;
-
- for_each_cpu(i, mask)
- loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(i)]);
-}
-
-void loongson3_ipi_interrupt(struct pt_regs *regs)
-{
- int i, cpu = smp_processor_id();
- unsigned int action, c0count;
-
- /* Load the ipi register to figure out what we're supposed to do */
- action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]);
-
- /* Clear the ipi register to clear the interrupt */
- loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu_logical_map(cpu)]);
-
- if (action & SMP_RESCHEDULE_YOURSELF)
- scheduler_ipi();
-
- if (action & SMP_CALL_FUNCTION)
- smp_call_function_interrupt();
-
- if (action & SMP_ASK_C0COUNT) {
- BUG_ON(cpu != 0);
- c0count = read_c0_count();
- for (i = 1; i < num_possible_cpus(); i++)
- per_cpu(core0_c0count, i) = c0count;
- }
-}
-
-#define MAX_LOOPS 1111
-/*
- * SMP init and finish on secondary CPUs
- */
-static void loongson3_init_secondary(void)
-{
- int i;
- uint32_t initcount;
- unsigned int cpu = smp_processor_id();
- unsigned int imask = STATUSF_IP7 | STATUSF_IP6 |
- STATUSF_IP3 | STATUSF_IP2;
-
- /* Set interrupt mask, but don't enable */
- change_c0_status(ST0_IM, imask);
-
- for (i = 0; i < num_possible_cpus(); i++)
- loongson3_ipi_write32(0xffffffff, ipi_en0_regs[cpu_logical_map(i)]);
-
- per_cpu(cpu_state, cpu) = CPU_ONLINE;
- cpu_data[cpu].core =
- cpu_logical_map(cpu) % loongson_sysconf.cores_per_package;
- cpu_data[cpu].package =
- cpu_logical_map(cpu) / loongson_sysconf.cores_per_package;
-
- i = 0;
- __this_cpu_write(core0_c0count, 0);
- loongson3_send_ipi_single(0, SMP_ASK_C0COUNT);
- while (!__this_cpu_read(core0_c0count)) {
- i++;
- cpu_relax();
- }
-
- if (i > MAX_LOOPS)
- i = MAX_LOOPS;
- initcount = __this_cpu_read(core0_c0count) + i;
- write_c0_count(initcount);
-}
-
-static void loongson3_smp_finish(void)
-{
- int cpu = smp_processor_id();
-
- write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
- local_irq_enable();
- loongson3_ipi_write64(0,
- (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x0));
- pr_info("CPU#%d finished, CP0_ST=%x\n",
- smp_processor_id(), read_c0_status());
-}
-
-static void __init loongson3_smp_setup(void)
-{
- int i = 0, num = 0; /* i: physical id, num: logical id */
-
- init_cpu_possible(cpu_none_mask);
-
- /* For unified kernel, NR_CPUS is the maximum possible value,
- * loongson_sysconf.nr_cpus is the really present value */
- while (i < loongson_sysconf.nr_cpus) {
- if (loongson_sysconf.reserved_cpus_mask & (1<<i)) {
- /* Reserved physical CPU cores */
- __cpu_number_map[i] = -1;
- } else {
- __cpu_number_map[i] = num;
- __cpu_logical_map[num] = i;
- set_cpu_possible(num, true);
- num++;
- }
- i++;
- }
- pr_info("Detected %i available CPU(s)\n", num);
-
- while (num < loongson_sysconf.nr_cpus) {
- __cpu_logical_map[num] = -1;
- num++;
- }
-
- ipi_set0_regs_init();
- ipi_clear0_regs_init();
- ipi_status0_regs_init();
- ipi_en0_regs_init();
- ipi_mailbox_buf_init();
- cpu_data[0].core = cpu_logical_map(0) % loongson_sysconf.cores_per_package;
- cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package;
-}
-
-static void __init loongson3_prepare_cpus(unsigned int max_cpus)
-{
- init_cpu_present(cpu_possible_mask);
- per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
-}
-
-/*
- * Setup the PC, SP, and GP of a secondary processor and start it runing!
- */
-static void loongson3_boot_secondary(int cpu, struct task_struct *idle)
-{
- unsigned long startargs[4];
-
- pr_info("Booting CPU#%d...\n", cpu);
-
- /* startargs[] are initial PC, SP and GP for secondary CPU */
- startargs[0] = (unsigned long)&smp_bootstrap;
- startargs[1] = (unsigned long)__KSTK_TOS(idle);
- startargs[2] = (unsigned long)task_thread_info(idle);
- startargs[3] = 0;
-
- pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n",
- cpu, startargs[0], startargs[1], startargs[2]);
-
- loongson3_ipi_write64(startargs[3],
- (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x18));
- loongson3_ipi_write64(startargs[2],
- (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x10));
- loongson3_ipi_write64(startargs[1],
- (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x8));
- loongson3_ipi_write64(startargs[0],
- (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x0));
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-static int loongson3_cpu_disable(void)
-{
- unsigned long flags;
- unsigned int cpu = smp_processor_id();
-
- if (cpu == 0)
- return -EBUSY;
-
- set_cpu_online(cpu, false);
- cpumask_clear_cpu(cpu, &cpu_callin_map);
- local_irq_save(flags);
- fixup_irqs();
- local_irq_restore(flags);
- flush_cache_all();
- local_flush_tlb_all();
-
- return 0;
-}
-
-
-static void loongson3_cpu_die(unsigned int cpu)
-{
- while (per_cpu(cpu_state, cpu) != CPU_DEAD)
- cpu_relax();
-
- mb();
-}
-
-/* To shutdown a core in Loongson 3, the target core should go to CKSEG1 and
- * flush all L1 entries at first. Then, another core (usually Core 0) can
- * safely disable the clock of the target core. loongson3_play_dead() is
- * called via CKSEG1 (uncached and unmmaped) */
-static void loongson3a_play_dead(int *state_addr)
-{
- register int val;
- register long cpuid, core, node, count;
- register void *addr, *base, *initfunc;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " li %[addr], 0x80000000 \n" /* KSEG0 */
- "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */
- " cache 0, 1(%[addr]) \n"
- " cache 0, 2(%[addr]) \n"
- " cache 0, 3(%[addr]) \n"
- " cache 1, 0(%[addr]) \n" /* flush L1 DCache */
- " cache 1, 1(%[addr]) \n"
- " cache 1, 2(%[addr]) \n"
- " cache 1, 3(%[addr]) \n"
- " addiu %[sets], %[sets], -1 \n"
- " bnez %[sets], 1b \n"
- " addiu %[addr], %[addr], 0x20 \n"
- " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */
- " sw %[val], (%[state_addr]) \n"
- " sync \n"
- " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */
- " .set pop \n"
- : [addr] "=&r" (addr), [val] "=&r" (val)
- : [state_addr] "r" (state_addr),
- [sets] "r" (cpu_data[smp_processor_id()].dcache.sets));
-
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " .set mips64 \n"
- " mfc0 %[cpuid], $15, 1 \n"
- " andi %[cpuid], 0x3ff \n"
- " dli %[base], 0x900000003ff01000 \n"
- " andi %[core], %[cpuid], 0x3 \n"
- " sll %[core], 8 \n" /* get core id */
- " or %[base], %[base], %[core] \n"
- " andi %[node], %[cpuid], 0xc \n"
- " dsll %[node], 42 \n" /* get node id */
- " or %[base], %[base], %[node] \n"
- "1: li %[count], 0x100 \n" /* wait for init loop */
- "2: bnez %[count], 2b \n" /* limit mailbox access */
- " addiu %[count], -1 \n"
- " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */
- " beqz %[initfunc], 1b \n"
- " nop \n"
- " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */
- " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */
- " ld $a1, 0x38(%[base]) \n"
- " jr %[initfunc] \n" /* jump to initial PC */
- " nop \n"
- " .set pop \n"
- : [core] "=&r" (core), [node] "=&r" (node),
- [base] "=&r" (base), [cpuid] "=&r" (cpuid),
- [count] "=&r" (count), [initfunc] "=&r" (initfunc)
- : /* No Input */
- : "a1");
-}
-
-static void loongson3b_play_dead(int *state_addr)
-{
- register int val;
- register long cpuid, core, node, count;
- register void *addr, *base, *initfunc;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " li %[addr], 0x80000000 \n" /* KSEG0 */
- "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */
- " cache 0, 1(%[addr]) \n"
- " cache 0, 2(%[addr]) \n"
- " cache 0, 3(%[addr]) \n"
- " cache 1, 0(%[addr]) \n" /* flush L1 DCache */
- " cache 1, 1(%[addr]) \n"
- " cache 1, 2(%[addr]) \n"
- " cache 1, 3(%[addr]) \n"
- " addiu %[sets], %[sets], -1 \n"
- " bnez %[sets], 1b \n"
- " addiu %[addr], %[addr], 0x20 \n"
- " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */
- " sw %[val], (%[state_addr]) \n"
- " sync \n"
- " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */
- " .set pop \n"
- : [addr] "=&r" (addr), [val] "=&r" (val)
- : [state_addr] "r" (state_addr),
- [sets] "r" (cpu_data[smp_processor_id()].dcache.sets));
-
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " .set mips64 \n"
- " mfc0 %[cpuid], $15, 1 \n"
- " andi %[cpuid], 0x3ff \n"
- " dli %[base], 0x900000003ff01000 \n"
- " andi %[core], %[cpuid], 0x3 \n"
- " sll %[core], 8 \n" /* get core id */
- " or %[base], %[base], %[core] \n"
- " andi %[node], %[cpuid], 0xc \n"
- " dsll %[node], 42 \n" /* get node id */
- " or %[base], %[base], %[node] \n"
- " dsrl %[node], 30 \n" /* 15:14 */
- " or %[base], %[base], %[node] \n"
- "1: li %[count], 0x100 \n" /* wait for init loop */
- "2: bnez %[count], 2b \n" /* limit mailbox access */
- " addiu %[count], -1 \n"
- " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */
- " beqz %[initfunc], 1b \n"
- " nop \n"
- " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */
- " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */
- " ld $a1, 0x38(%[base]) \n"
- " jr %[initfunc] \n" /* jump to initial PC */
- " nop \n"
- " .set pop \n"
- : [core] "=&r" (core), [node] "=&r" (node),
- [base] "=&r" (base), [cpuid] "=&r" (cpuid),
- [count] "=&r" (count), [initfunc] "=&r" (initfunc)
- : /* No Input */
- : "a1");
-}
-
-void play_dead(void)
-{
- int *state_addr;
- unsigned int cpu = smp_processor_id();
- void (*play_dead_at_ckseg1)(int *);
-
- idle_task_exit();
- switch (loongson_sysconf.cputype) {
- case Loongson_3A:
- default:
- play_dead_at_ckseg1 =
- (void *)CKSEG1ADDR((unsigned long)loongson3a_play_dead);
- break;
- case Loongson_3B:
- play_dead_at_ckseg1 =
- (void *)CKSEG1ADDR((unsigned long)loongson3b_play_dead);
- break;
- }
- state_addr = &per_cpu(cpu_state, cpu);
- mb();
- play_dead_at_ckseg1(state_addr);
-}
-
-void loongson3_disable_clock(int cpu)
-{
- uint64_t core_id = cpu_data[cpu].core;
- uint64_t package_id = cpu_data[cpu].package;
-
- if (loongson_sysconf.cputype == Loongson_3A) {
- LOONGSON_CHIPCFG(package_id) &= ~(1 << (12 + core_id));
- } else if (loongson_sysconf.cputype == Loongson_3B) {
- if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG))
- LOONGSON_FREQCTRL(package_id) &= ~(1 << (core_id * 4 + 3));
- }
-}
-
-void loongson3_enable_clock(int cpu)
-{
- uint64_t core_id = cpu_data[cpu].core;
- uint64_t package_id = cpu_data[cpu].package;
-
- if (loongson_sysconf.cputype == Loongson_3A) {
- LOONGSON_CHIPCFG(package_id) |= 1 << (12 + core_id);
- } else if (loongson_sysconf.cputype == Loongson_3B) {
- if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG))
- LOONGSON_FREQCTRL(package_id) |= 1 << (core_id * 4 + 3);
- }
-}
-
-#define CPU_POST_DEAD_FROZEN (CPU_POST_DEAD | CPU_TASKS_FROZEN)
-static int loongson3_cpu_callback(struct notifier_block *nfb,
- unsigned long action, void *hcpu)
-{
- unsigned int cpu = (unsigned long)hcpu;
-
- switch (action) {
- case CPU_POST_DEAD:
- case CPU_POST_DEAD_FROZEN:
- pr_info("Disable clock for CPU#%d\n", cpu);
- loongson3_disable_clock(cpu);
- break;
- case CPU_UP_PREPARE:
- case CPU_UP_PREPARE_FROZEN:
- pr_info("Enable clock for CPU#%d\n", cpu);
- loongson3_enable_clock(cpu);
- break;
- }
-
- return NOTIFY_OK;
-}
-
-static int register_loongson3_notifier(void)
-{
- hotcpu_notifier(loongson3_cpu_callback, 0);
- return 0;
-}
-early_initcall(register_loongson3_notifier);
-
-#endif
-
-struct plat_smp_ops loongson3_smp_ops = {
- .send_ipi_single = loongson3_send_ipi_single,
- .send_ipi_mask = loongson3_send_ipi_mask,
- .init_secondary = loongson3_init_secondary,
- .smp_finish = loongson3_smp_finish,
- .boot_secondary = loongson3_boot_secondary,
- .smp_setup = loongson3_smp_setup,
- .prepare_cpus = loongson3_prepare_cpus,
-#ifdef CONFIG_HOTPLUG_CPU
- .cpu_disable = loongson3_cpu_disable,
- .cpu_die = loongson3_cpu_die,
-#endif
-};
+++ /dev/null
-#ifndef __LOONGSON_SMP_H_
-#define __LOONGSON_SMP_H_
-
-/* for Loongson-3 smp support */
-extern unsigned long long smp_group[4];
-
-/* 4 groups(nodes) in maximum in numa case */
-#define SMP_CORE_GROUP0_BASE (smp_group[0])
-#define SMP_CORE_GROUP1_BASE (smp_group[1])
-#define SMP_CORE_GROUP2_BASE (smp_group[2])
-#define SMP_CORE_GROUP3_BASE (smp_group[3])
-
-/* 4 cores in each group(node) */
-#define SMP_CORE0_OFFSET 0x000
-#define SMP_CORE1_OFFSET 0x100
-#define SMP_CORE2_OFFSET 0x200
-#define SMP_CORE3_OFFSET 0x300
-
-/* ipi registers offsets */
-#define STATUS0 0x00
-#define EN0 0x04
-#define SET0 0x08
-#define CLEAR0 0x0c
-#define STATUS1 0x10
-#define MASK1 0x14
-#define SET1 0x18
-#define CLEAR1 0x1c
-#define BUF 0x20
-
-#endif
+++ /dev/null
-if MACH_LOONGSON1
-
-choice
- prompt "Machine Type"
-
-config LOONGSON1_LS1B
- bool "Loongson LS1B board"
- select CEVT_R4K if !MIPS_EXTERNAL_TIMER
- select CSRC_R4K if !MIPS_EXTERNAL_TIMER
- select SYS_HAS_CPU_LOONGSON1B
- select DMA_NONCOHERENT
- select BOOT_ELF32
- select IRQ_MIPS_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_SUPPORTS_MIPS16
- select SYS_HAS_EARLY_PRINTK
- select USE_GENERIC_EARLY_PRINTK_8250
- select COMMON_CLK
-
-endchoice
-
-menuconfig CEVT_CSRC_LS1X
- bool "Use PWM Timer for clockevent/clocksource"
- select MIPS_EXTERNAL_TIMER
- depends on CPU_LOONGSON1
- help
- This option changes the default clockevent/clocksource to PWM Timer,
- and is required by Loongson1 CPUFreq support.
-
- If unsure, say N.
-
-choice
- prompt "Select clockevent/clocksource"
- depends on CEVT_CSRC_LS1X
- default TIMER_USE_PWM0
-
-config TIMER_USE_PWM0
- bool "Use PWM Timer 0"
- help
- Use PWM Timer 0 as the default clockevent/clocksourcer.
-
-config TIMER_USE_PWM1
- bool "Use PWM Timer 1"
- help
- Use PWM Timer 1 as the default clockevent/clocksourcer.
-
-config TIMER_USE_PWM2
- bool "Use PWM Timer 2"
- help
- Use PWM Timer 2 as the default clockevent/clocksourcer.
-
-config TIMER_USE_PWM3
- bool "Use PWM Timer 3"
- help
- Use PWM Timer 3 as the default clockevent/clocksourcer.
-
-endchoice
-
-endif # MACH_LOONGSON1
+++ /dev/null
-#
-# Common code for all Loongson 1 based systems
-#
-
-obj-$(CONFIG_MACH_LOONGSON1) += common/
-
-#
-# Loongson LS1B board
-#
-
-obj-$(CONFIG_LOONGSON1_LS1B) += ls1b/
+++ /dev/null
-cflags-$(CONFIG_CPU_LOONGSON1) += \
- $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
- -Wa,-mips32r2 -Wa,--trap
-
-platform-$(CONFIG_MACH_LOONGSON1) += loongson1/
-cflags-$(CONFIG_MACH_LOONGSON1) += -I$(srctree)/arch/mips/include/asm/mach-loongson1
-load-$(CONFIG_LOONGSON1_LS1B) += 0xffffffff80100000
+++ /dev/null
-#
-# Makefile for common code of loongson1 based machines.
-#
-
-obj-y += time.o irq.o platform.o prom.o reset.o setup.o
+++ /dev/null
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq_cpu.h>
-
-#include <loongson1.h>
-#include <irq.h>
-
-#define LS1X_INTC_REG(n, x) \
- ((void __iomem *)KSEG1ADDR(LS1X_INTC_BASE + (n * 0x18) + (x)))
-
-#define LS1X_INTC_INTISR(n) LS1X_INTC_REG(n, 0x0)
-#define LS1X_INTC_INTIEN(n) LS1X_INTC_REG(n, 0x4)
-#define LS1X_INTC_INTSET(n) LS1X_INTC_REG(n, 0x8)
-#define LS1X_INTC_INTCLR(n) LS1X_INTC_REG(n, 0xc)
-#define LS1X_INTC_INTPOL(n) LS1X_INTC_REG(n, 0x10)
-#define LS1X_INTC_INTEDGE(n) LS1X_INTC_REG(n, 0x14)
-
-static void ls1x_irq_ack(struct irq_data *d)
-{
- unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
- unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
- __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
- | (1 << bit), LS1X_INTC_INTCLR(n));
-}
-
-static void ls1x_irq_mask(struct irq_data *d)
-{
- unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
- unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
- __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
- & ~(1 << bit), LS1X_INTC_INTIEN(n));
-}
-
-static void ls1x_irq_mask_ack(struct irq_data *d)
-{
- unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
- unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
- __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
- & ~(1 << bit), LS1X_INTC_INTIEN(n));
- __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
- | (1 << bit), LS1X_INTC_INTCLR(n));
-}
-
-static void ls1x_irq_unmask(struct irq_data *d)
-{
- unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
- unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
- __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
- | (1 << bit), LS1X_INTC_INTIEN(n));
-}
-
-static struct irq_chip ls1x_irq_chip = {
- .name = "LS1X-INTC",
- .irq_ack = ls1x_irq_ack,
- .irq_mask = ls1x_irq_mask,
- .irq_mask_ack = ls1x_irq_mask_ack,
- .irq_unmask = ls1x_irq_unmask,
-};
-
-static void ls1x_irq_dispatch(int n)
-{
- u32 int_status, irq;
-
- /* Get pending sources, masked by current enables */
- int_status = __raw_readl(LS1X_INTC_INTISR(n)) &
- __raw_readl(LS1X_INTC_INTIEN(n));
-
- if (int_status) {
- irq = LS1X_IRQ(n, __ffs(int_status));
- do_IRQ(irq);
- }
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending;
-
- pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
- if (pending & CAUSEF_IP7)
- do_IRQ(TIMER_IRQ);
- else if (pending & CAUSEF_IP2)
- ls1x_irq_dispatch(0); /* INT0 */
- else if (pending & CAUSEF_IP3)
- ls1x_irq_dispatch(1); /* INT1 */
- else if (pending & CAUSEF_IP4)
- ls1x_irq_dispatch(2); /* INT2 */
- else if (pending & CAUSEF_IP5)
- ls1x_irq_dispatch(3); /* INT3 */
- else if (pending & CAUSEF_IP6)
- ls1x_irq_dispatch(4); /* INT4 */
- else
- spurious_interrupt();
-
-}
-
-struct irqaction cascade_irqaction = {
- .handler = no_action,
- .name = "cascade",
- .flags = IRQF_NO_THREAD,
-};
-
-static void __init ls1x_irq_init(int base)
-{
- int n;
-
- /* Disable interrupts and clear pending,
- * setup all IRQs as high level triggered
- */
- for (n = 0; n < 4; n++) {
- __raw_writel(0x0, LS1X_INTC_INTIEN(n));
- __raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
- __raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
- /* set DMA0, DMA1 and DMA2 to edge trigger */
- __raw_writel(n ? 0x0 : 0xe000, LS1X_INTC_INTEDGE(n));
- }
-
-
- for (n = base; n < LS1X_IRQS; n++) {
- irq_set_chip_and_handler(n, &ls1x_irq_chip,
- handle_level_irq);
- }
-
- setup_irq(INT0_IRQ, &cascade_irqaction);
- setup_irq(INT1_IRQ, &cascade_irqaction);
- setup_irq(INT2_IRQ, &cascade_irqaction);
- setup_irq(INT3_IRQ, &cascade_irqaction);
-}
-
-void __init arch_init_irq(void)
-{
- mips_cpu_irq_init();
- ls1x_irq_init(LS1X_IRQ_BASE);
-}
+++ /dev/null
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/phy.h>
-#include <linux/serial_8250.h>
-#include <linux/stmmac.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <asm-generic/sizes.h>
-
-#include <cpufreq.h>
-#include <loongson1.h>
-
-/* 8250/16550 compatible UART */
-#define LS1X_UART(_id) \
- { \
- .mapbase = LS1X_UART ## _id ## _BASE, \
- .irq = LS1X_UART ## _id ## _IRQ, \
- .iotype = UPIO_MEM, \
- .flags = UPF_IOREMAP | UPF_FIXED_TYPE, \
- .type = PORT_16550A, \
- }
-
-static struct plat_serial8250_port ls1x_serial8250_pdata[] = {
- LS1X_UART(0),
- LS1X_UART(1),
- LS1X_UART(2),
- LS1X_UART(3),
- {},
-};
-
-struct platform_device ls1x_uart_pdev = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = ls1x_serial8250_pdata,
- },
-};
-
-void __init ls1x_serial_setup(struct platform_device *pdev)
-{
- struct clk *clk;
- struct plat_serial8250_port *p;
-
- clk = clk_get(&pdev->dev, pdev->name);
- if (IS_ERR(clk)) {
- pr_err("unable to get %s clock, err=%ld",
- pdev->name, PTR_ERR(clk));
- return;
- }
- clk_prepare_enable(clk);
-
- for (p = pdev->dev.platform_data; p->flags != 0; ++p)
- p->uartclk = clk_get_rate(clk);
-}
-
-/* CPUFreq */
-static struct plat_ls1x_cpufreq ls1x_cpufreq_pdata = {
- .clk_name = "cpu_clk",
- .osc_clk_name = "osc_33m_clk",
- .max_freq = 266 * 1000,
- .min_freq = 33 * 1000,
-};
-
-struct platform_device ls1x_cpufreq_pdev = {
- .name = "ls1x-cpufreq",
- .dev = {
- .platform_data = &ls1x_cpufreq_pdata,
- },
-};
-
-/* Synopsys Ethernet GMAC */
-static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
- .phy_mask = 0,
-};
-
-static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
- .pbl = 1,
-};
-
-int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
-{
- struct plat_stmmacenet_data *plat_dat = NULL;
- u32 val;
-
- val = __raw_readl(LS1X_MUX_CTRL1);
-
- plat_dat = dev_get_platdata(&pdev->dev);
- if (plat_dat->bus_id) {
- __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
- GMAC1_USE_UART0, LS1X_MUX_CTRL0);
- switch (plat_dat->interface) {
- case PHY_INTERFACE_MODE_RGMII:
- val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
- break;
- case PHY_INTERFACE_MODE_MII:
- val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
- break;
- default:
- pr_err("unsupported mii mode %d\n",
- plat_dat->interface);
- return -ENOTSUPP;
- }
- val &= ~GMAC1_SHUT;
- } else {
- switch (plat_dat->interface) {
- case PHY_INTERFACE_MODE_RGMII:
- val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
- break;
- case PHY_INTERFACE_MODE_MII:
- val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
- break;
- default:
- pr_err("unsupported mii mode %d\n",
- plat_dat->interface);
- return -ENOTSUPP;
- }
- val &= ~GMAC0_SHUT;
- }
- __raw_writel(val, LS1X_MUX_CTRL1);
-
- return 0;
-}
-
-static struct plat_stmmacenet_data ls1x_eth0_pdata = {
- .bus_id = 0,
- .phy_addr = -1,
- .interface = PHY_INTERFACE_MODE_MII,
- .mdio_bus_data = &ls1x_mdio_bus_data,
- .dma_cfg = &ls1x_eth_dma_cfg,
- .has_gmac = 1,
- .tx_coe = 1,
- .init = ls1x_eth_mux_init,
-};
-
-static struct resource ls1x_eth0_resources[] = {
- [0] = {
- .start = LS1X_GMAC0_BASE,
- .end = LS1X_GMAC0_BASE + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "macirq",
- .start = LS1X_GMAC0_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device ls1x_eth0_pdev = {
- .name = "stmmaceth",
- .id = 0,
- .num_resources = ARRAY_SIZE(ls1x_eth0_resources),
- .resource = ls1x_eth0_resources,
- .dev = {
- .platform_data = &ls1x_eth0_pdata,
- },
-};
-
-static struct plat_stmmacenet_data ls1x_eth1_pdata = {
- .bus_id = 1,
- .phy_addr = -1,
- .interface = PHY_INTERFACE_MODE_MII,
- .mdio_bus_data = &ls1x_mdio_bus_data,
- .dma_cfg = &ls1x_eth_dma_cfg,
- .has_gmac = 1,
- .tx_coe = 1,
- .init = ls1x_eth_mux_init,
-};
-
-static struct resource ls1x_eth1_resources[] = {
- [0] = {
- .start = LS1X_GMAC1_BASE,
- .end = LS1X_GMAC1_BASE + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "macirq",
- .start = LS1X_GMAC1_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device ls1x_eth1_pdev = {
- .name = "stmmaceth",
- .id = 1,
- .num_resources = ARRAY_SIZE(ls1x_eth1_resources),
- .resource = ls1x_eth1_resources,
- .dev = {
- .platform_data = &ls1x_eth1_pdata,
- },
-};
-
-/* USB EHCI */
-static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ls1x_ehci_resources[] = {
- [0] = {
- .start = LS1X_EHCI_BASE,
- .end = LS1X_EHCI_BASE + SZ_32K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = LS1X_EHCI_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct usb_ehci_pdata ls1x_ehci_pdata = {
-};
-
-struct platform_device ls1x_ehci_pdev = {
- .name = "ehci-platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(ls1x_ehci_resources),
- .resource = ls1x_ehci_resources,
- .dev = {
- .dma_mask = &ls1x_ehci_dmamask,
- .platform_data = &ls1x_ehci_pdata,
- },
-};
-
-/* Real Time Clock */
-struct platform_device ls1x_rtc_pdev = {
- .name = "ls1x-rtc",
- .id = -1,
-};
+++ /dev/null
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Modified from arch/mips/pnx833x/common/prom.c.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/bootinfo.h>
-
-#include <loongson1.h>
-#include <prom.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-unsigned long memsize, highmemsize;
-
-char *prom_getenv(char *envname)
-{
- char **env = prom_envp;
- int i;
-
- i = strlen(envname);
-
- while (*env) {
- if (strncmp(envname, *env, i) == 0 && *(*env + i) == '=')
- return *env + i + 1;
- env++;
- }
-
- return 0;
-}
-
-static inline unsigned long env_or_default(char *env, unsigned long dfl)
-{
- char *str = prom_getenv(env);
- return str ? simple_strtol(str, 0, 0) : dfl;
-}
-
-void __init prom_init_cmdline(void)
-{
- char *c = &(arcs_cmdline[0]);
- int i;
-
- for (i = 1; i < prom_argc; i++) {
- strcpy(c, prom_argv[i]);
- c += strlen(prom_argv[i]);
- if (i < prom_argc - 1)
- *c++ = ' ';
- }
- *c = 0;
-}
-
-void __init prom_init(void)
-{
- void __iomem *uart_base;
- prom_argc = fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
-
- memsize = env_or_default("memsize", DEFAULT_MEMSIZE);
- highmemsize = env_or_default("highmemsize", 0x0);
-
- if (strstr(arcs_cmdline, "console=ttyS3"))
- uart_base = ioremap_nocache(LS1X_UART3_BASE, 0x0f);
- else if (strstr(arcs_cmdline, "console=ttyS2"))
- uart_base = ioremap_nocache(LS1X_UART2_BASE, 0x0f);
- else if (strstr(arcs_cmdline, "console=ttyS1"))
- uart_base = ioremap_nocache(LS1X_UART1_BASE, 0x0f);
- else
- uart_base = ioremap_nocache(LS1X_UART0_BASE, 0x0f);
- setup_8250_early_printk_port((unsigned long)uart_base, 0, 0);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
+++ /dev/null
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/io.h>
-#include <linux/pm.h>
-#include <asm/idle.h>
-#include <asm/reboot.h>
-
-#include <loongson1.h>
-
-static void __iomem *wdt_base;
-
-static void ls1x_halt(void)
-{
- while (1) {
- if (cpu_wait)
- cpu_wait();
- }
-}
-
-static void ls1x_restart(char *command)
-{
- __raw_writel(0x1, wdt_base + WDT_EN);
- __raw_writel(0x1, wdt_base + WDT_TIMER);
- __raw_writel(0x1, wdt_base + WDT_SET);
-
- ls1x_halt();
-}
-
-static void ls1x_power_off(void)
-{
- ls1x_halt();
-}
-
-static int __init ls1x_reboot_setup(void)
-{
- wdt_base = ioremap_nocache(LS1X_WDT_BASE, 0x0f);
- if (!wdt_base)
- panic("Failed to remap watchdog registers");
-
- _machine_restart = ls1x_restart;
- _machine_halt = ls1x_halt;
- pm_power_off = ls1x_power_off;
-
- return 0;
-}
-
-arch_initcall(ls1x_reboot_setup);
+++ /dev/null
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <asm/bootinfo.h>
-
-#include <prom.h>
-
-void __init plat_mem_setup(void)
-{
- add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
-}
-
-const char *get_system_type(void)
-{
- unsigned int processor_id = (¤t_cpu_data)->processor_id;
-
- switch (processor_id & PRID_REV_MASK) {
- case PRID_REV_LOONGSON1B:
- return "LOONGSON LS1B";
- default:
- return "LOONGSON (unknown)";
- }
-}
+++ /dev/null
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <asm/time.h>
-
-#include <loongson1.h>
-#include <platform.h>
-
-#ifdef CONFIG_CEVT_CSRC_LS1X
-
-#if defined(CONFIG_TIMER_USE_PWM1)
-#define LS1X_TIMER_BASE LS1X_PWM1_BASE
-#define LS1X_TIMER_IRQ LS1X_PWM1_IRQ
-
-#elif defined(CONFIG_TIMER_USE_PWM2)
-#define LS1X_TIMER_BASE LS1X_PWM2_BASE
-#define LS1X_TIMER_IRQ LS1X_PWM2_IRQ
-
-#elif defined(CONFIG_TIMER_USE_PWM3)
-#define LS1X_TIMER_BASE LS1X_PWM3_BASE
-#define LS1X_TIMER_IRQ LS1X_PWM3_IRQ
-
-#else
-#define LS1X_TIMER_BASE LS1X_PWM0_BASE
-#define LS1X_TIMER_IRQ LS1X_PWM0_IRQ
-#endif
-
-DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
-
-static void __iomem *timer_base;
-static uint32_t ls1x_jiffies_per_tick;
-
-static inline void ls1x_pwmtimer_set_period(uint32_t period)
-{
- __raw_writel(period, timer_base + PWM_HRC);
- __raw_writel(period, timer_base + PWM_LRC);
-}
-
-static inline void ls1x_pwmtimer_restart(void)
-{
- __raw_writel(0x0, timer_base + PWM_CNT);
- __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
-}
-
-void __init ls1x_pwmtimer_init(void)
-{
- timer_base = ioremap(LS1X_TIMER_BASE, 0xf);
- if (!timer_base)
- panic("Failed to remap timer registers");
-
- ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
-
- ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
- ls1x_pwmtimer_restart();
-}
-
-static cycle_t ls1x_clocksource_read(struct clocksource *cs)
-{
- unsigned long flags;
- int count;
- u32 jifs;
- static int old_count;
- static u32 old_jifs;
-
- raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
- /*
- * Although our caller may have the read side of xtime_lock,
- * this is now a seqlock, and we are cheating in this routine
- * by having side effects on state that we cannot undo if
- * there is a collision on the seqlock and our caller has to
- * retry. (Namely, old_jifs and old_count.) So we must treat
- * jiffies as volatile despite the lock. We read jiffies
- * before latching the timer count to guarantee that although
- * the jiffies value might be older than the count (that is,
- * the counter may underflow between the last point where
- * jiffies was incremented and the point where we latch the
- * count), it cannot be newer.
- */
- jifs = jiffies;
- /* read the count */
- count = __raw_readl(timer_base + PWM_CNT);
-
- /*
- * It's possible for count to appear to go the wrong way for this
- * reason:
- *
- * The timer counter underflows, but we haven't handled the resulting
- * interrupt and incremented jiffies yet.
- *
- * Previous attempts to handle these cases intelligently were buggy, so
- * we just do the simple thing now.
- */
- if (count < old_count && jifs == old_jifs)
- count = old_count;
-
- old_count = count;
- old_jifs = jifs;
-
- raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
-
- return (cycle_t) (jifs * ls1x_jiffies_per_tick) + count;
-}
-
-static struct clocksource ls1x_clocksource = {
- .name = "ls1x-pwmtimer",
- .read = ls1x_clocksource_read,
- .mask = CLOCKSOURCE_MASK(24),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static irqreturn_t ls1x_clockevent_isr(int irq, void *devid)
-{
- struct clock_event_device *cd = devid;
-
- ls1x_pwmtimer_restart();
- cd->event_handler(cd);
-
- return IRQ_HANDLED;
-}
-
-static void ls1x_clockevent_set_mode(enum clock_event_mode mode,
- struct clock_event_device *cd)
-{
- raw_spin_lock(&ls1x_timer_lock);
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
- ls1x_pwmtimer_restart();
- case CLOCK_EVT_MODE_RESUME:
- __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- case CLOCK_EVT_MODE_SHUTDOWN:
- __raw_writel(__raw_readl(timer_base + PWM_CTRL) & ~CNT_EN,
- timer_base + PWM_CTRL);
- break;
- default:
- break;
- }
- raw_spin_unlock(&ls1x_timer_lock);
-}
-
-static int ls1x_clockevent_set_next(unsigned long evt,
- struct clock_event_device *cd)
-{
- raw_spin_lock(&ls1x_timer_lock);
- ls1x_pwmtimer_set_period(evt);
- ls1x_pwmtimer_restart();
- raw_spin_unlock(&ls1x_timer_lock);
-
- return 0;
-}
-
-static struct clock_event_device ls1x_clockevent = {
- .name = "ls1x-pwmtimer",
- .features = CLOCK_EVT_FEAT_PERIODIC,
- .rating = 300,
- .irq = LS1X_TIMER_IRQ,
- .set_next_event = ls1x_clockevent_set_next,
- .set_mode = ls1x_clockevent_set_mode,
-};
-
-static struct irqaction ls1x_pwmtimer_irqaction = {
- .name = "ls1x-pwmtimer",
- .handler = ls1x_clockevent_isr,
- .dev_id = &ls1x_clockevent,
- .flags = IRQF_PERCPU | IRQF_TIMER,
-};
-
-static void __init ls1x_time_init(void)
-{
- struct clock_event_device *cd = &ls1x_clockevent;
- int ret;
-
- if (!mips_hpt_frequency)
- panic("Invalid timer clock rate");
-
- ls1x_pwmtimer_init();
-
- clockevent_set_clock(cd, mips_hpt_frequency);
- cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd);
- cd->min_delta_ns = clockevent_delta2ns(0x000300, cd);
- cd->cpumask = cpumask_of(smp_processor_id());
- clockevents_register_device(cd);
-
- ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000;
- ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency);
- if (ret)
- panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
-
- setup_irq(LS1X_TIMER_IRQ, &ls1x_pwmtimer_irqaction);
-}
-#endif /* CONFIG_CEVT_CSRC_LS1X */
-
-void __init plat_time_init(void)
-{
- struct clk *clk = NULL;
-
- /* initialize LS1X clocks */
- ls1x_clk_init();
-
-#ifdef CONFIG_CEVT_CSRC_LS1X
- /* setup LS1X PWM timer */
- clk = clk_get(NULL, "ls1x_pwmtimer");
- if (IS_ERR(clk))
- panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
-
- mips_hpt_frequency = clk_get_rate(clk);
- ls1x_time_init();
-#else
- /* setup mips r4k timer */
- clk = clk_get(NULL, "cpu_clk");
- if (IS_ERR(clk))
- panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
-
- mips_hpt_frequency = clk_get_rate(clk) / 2;
-#endif /* CONFIG_CEVT_CSRC_LS1X */
-}
+++ /dev/null
-#
-# Makefile for loongson1B based machines.
-#
-
-obj-y += board.o
+++ /dev/null
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <platform.h>
-
-static struct platform_device *ls1b_platform_devices[] __initdata = {
- &ls1x_uart_pdev,
- &ls1x_cpufreq_pdev,
- &ls1x_eth0_pdev,
- &ls1x_eth1_pdev,
- &ls1x_ehci_pdev,
- &ls1x_rtc_pdev,
-};
-
-static int __init ls1b_platform_init(void)
-{
- int err;
-
- ls1x_serial_setup(&ls1x_uart_pdev);
-
- err = platform_add_devices(ls1b_platform_devices,
- ARRAY_SIZE(ls1b_platform_devices));
- return err;
-}
-
-arch_initcall(ls1b_platform_init);
--- /dev/null
+if MACH_LOONGSON32
+
+choice
+ prompt "Machine Type"
+
+config LOONGSON1_LS1B
+ bool "Loongson LS1B board"
+ select CEVT_R4K if !MIPS_EXTERNAL_TIMER
+ select CSRC_R4K if !MIPS_EXTERNAL_TIMER
+ select SYS_HAS_CPU_LOONGSON1B
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select IRQ_MIPS_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_MIPS16
+ select SYS_HAS_EARLY_PRINTK
+ select USE_GENERIC_EARLY_PRINTK_8250
+ select COMMON_CLK
+
+endchoice
+
+menuconfig CEVT_CSRC_LS1X
+ bool "Use PWM Timer for clockevent/clocksource"
+ select MIPS_EXTERNAL_TIMER
+ depends on CPU_LOONGSON1
+ help
+ This option changes the default clockevent/clocksource to PWM Timer,
+ and is required by Loongson1 CPUFreq support.
+
+ If unsure, say N.
+
+choice
+ prompt "Select clockevent/clocksource"
+ depends on CEVT_CSRC_LS1X
+ default TIMER_USE_PWM0
+
+config TIMER_USE_PWM0
+ bool "Use PWM Timer 0"
+ help
+ Use PWM Timer 0 as the default clockevent/clocksourcer.
+
+config TIMER_USE_PWM1
+ bool "Use PWM Timer 1"
+ help
+ Use PWM Timer 1 as the default clockevent/clocksourcer.
+
+config TIMER_USE_PWM2
+ bool "Use PWM Timer 2"
+ help
+ Use PWM Timer 2 as the default clockevent/clocksourcer.
+
+config TIMER_USE_PWM3
+ bool "Use PWM Timer 3"
+ help
+ Use PWM Timer 3 as the default clockevent/clocksourcer.
+
+endchoice
+
+endif # MACH_LOONGSON32
--- /dev/null
+#
+# Common code for all Loongson 1 based systems
+#
+
+obj-$(CONFIG_MACH_LOONGSON32) += common/
+
+#
+# Loongson LS1B board
+#
+
+obj-$(CONFIG_LOONGSON1_LS1B) += ls1b/
--- /dev/null
+cflags-$(CONFIG_CPU_LOONGSON1) += \
+ $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
+ -Wa,-mips32r2 -Wa,--trap
+
+platform-$(CONFIG_MACH_LOONGSON32) += loongson32/
+cflags-$(CONFIG_MACH_LOONGSON32) += -I$(srctree)/arch/mips/include/asm/mach-loongson32
+load-$(CONFIG_LOONGSON1_LS1B) += 0xffffffff80100000
--- /dev/null
+#
+# Makefile for common code of loongson1 based machines.
+#
+
+obj-y += time.o irq.o platform.o prom.o reset.o setup.o
--- /dev/null
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq_cpu.h>
+
+#include <loongson1.h>
+#include <irq.h>
+
+#define LS1X_INTC_REG(n, x) \
+ ((void __iomem *)KSEG1ADDR(LS1X_INTC_BASE + (n * 0x18) + (x)))
+
+#define LS1X_INTC_INTISR(n) LS1X_INTC_REG(n, 0x0)
+#define LS1X_INTC_INTIEN(n) LS1X_INTC_REG(n, 0x4)
+#define LS1X_INTC_INTSET(n) LS1X_INTC_REG(n, 0x8)
+#define LS1X_INTC_INTCLR(n) LS1X_INTC_REG(n, 0xc)
+#define LS1X_INTC_INTPOL(n) LS1X_INTC_REG(n, 0x10)
+#define LS1X_INTC_INTEDGE(n) LS1X_INTC_REG(n, 0x14)
+
+static void ls1x_irq_ack(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
+ | (1 << bit), LS1X_INTC_INTCLR(n));
+}
+
+static void ls1x_irq_mask(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
+ & ~(1 << bit), LS1X_INTC_INTIEN(n));
+}
+
+static void ls1x_irq_mask_ack(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
+ & ~(1 << bit), LS1X_INTC_INTIEN(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
+ | (1 << bit), LS1X_INTC_INTCLR(n));
+}
+
+static void ls1x_irq_unmask(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
+ | (1 << bit), LS1X_INTC_INTIEN(n));
+}
+
+static struct irq_chip ls1x_irq_chip = {
+ .name = "LS1X-INTC",
+ .irq_ack = ls1x_irq_ack,
+ .irq_mask = ls1x_irq_mask,
+ .irq_mask_ack = ls1x_irq_mask_ack,
+ .irq_unmask = ls1x_irq_unmask,
+};
+
+static void ls1x_irq_dispatch(int n)
+{
+ u32 int_status, irq;
+
+ /* Get pending sources, masked by current enables */
+ int_status = __raw_readl(LS1X_INTC_INTISR(n)) &
+ __raw_readl(LS1X_INTC_INTIEN(n));
+
+ if (int_status) {
+ irq = LS1X_IRQ(n, __ffs(int_status));
+ do_IRQ(irq);
+ }
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending;
+
+ pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+ if (pending & CAUSEF_IP7)
+ do_IRQ(TIMER_IRQ);
+ else if (pending & CAUSEF_IP2)
+ ls1x_irq_dispatch(0); /* INT0 */
+ else if (pending & CAUSEF_IP3)
+ ls1x_irq_dispatch(1); /* INT1 */
+ else if (pending & CAUSEF_IP4)
+ ls1x_irq_dispatch(2); /* INT2 */
+ else if (pending & CAUSEF_IP5)
+ ls1x_irq_dispatch(3); /* INT3 */
+ else if (pending & CAUSEF_IP6)
+ ls1x_irq_dispatch(4); /* INT4 */
+ else
+ spurious_interrupt();
+
+}
+
+struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .name = "cascade",
+ .flags = IRQF_NO_THREAD,
+};
+
+static void __init ls1x_irq_init(int base)
+{
+ int n;
+
+ /* Disable interrupts and clear pending,
+ * setup all IRQs as high level triggered
+ */
+ for (n = 0; n < 4; n++) {
+ __raw_writel(0x0, LS1X_INTC_INTIEN(n));
+ __raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
+ __raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
+ /* set DMA0, DMA1 and DMA2 to edge trigger */
+ __raw_writel(n ? 0x0 : 0xe000, LS1X_INTC_INTEDGE(n));
+ }
+
+
+ for (n = base; n < LS1X_IRQS; n++) {
+ irq_set_chip_and_handler(n, &ls1x_irq_chip,
+ handle_level_irq);
+ }
+
+ setup_irq(INT0_IRQ, &cascade_irqaction);
+ setup_irq(INT1_IRQ, &cascade_irqaction);
+ setup_irq(INT2_IRQ, &cascade_irqaction);
+ setup_irq(INT3_IRQ, &cascade_irqaction);
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ ls1x_irq_init(LS1X_IRQ_BASE);
+}
--- /dev/null
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/phy.h>
+#include <linux/serial_8250.h>
+#include <linux/stmmac.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <asm-generic/sizes.h>
+
+#include <cpufreq.h>
+#include <loongson1.h>
+
+/* 8250/16550 compatible UART */
+#define LS1X_UART(_id) \
+ { \
+ .mapbase = LS1X_UART ## _id ## _BASE, \
+ .irq = LS1X_UART ## _id ## _IRQ, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_IOREMAP | UPF_FIXED_TYPE, \
+ .type = PORT_16550A, \
+ }
+
+static struct plat_serial8250_port ls1x_serial8250_pdata[] = {
+ LS1X_UART(0),
+ LS1X_UART(1),
+ LS1X_UART(2),
+ LS1X_UART(3),
+ {},
+};
+
+struct platform_device ls1x_uart_pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = ls1x_serial8250_pdata,
+ },
+};
+
+void __init ls1x_serial_setup(struct platform_device *pdev)
+{
+ struct clk *clk;
+ struct plat_serial8250_port *p;
+
+ clk = clk_get(&pdev->dev, pdev->name);
+ if (IS_ERR(clk)) {
+ pr_err("unable to get %s clock, err=%ld",
+ pdev->name, PTR_ERR(clk));
+ return;
+ }
+ clk_prepare_enable(clk);
+
+ for (p = pdev->dev.platform_data; p->flags != 0; ++p)
+ p->uartclk = clk_get_rate(clk);
+}
+
+/* CPUFreq */
+static struct plat_ls1x_cpufreq ls1x_cpufreq_pdata = {
+ .clk_name = "cpu_clk",
+ .osc_clk_name = "osc_33m_clk",
+ .max_freq = 266 * 1000,
+ .min_freq = 33 * 1000,
+};
+
+struct platform_device ls1x_cpufreq_pdev = {
+ .name = "ls1x-cpufreq",
+ .dev = {
+ .platform_data = &ls1x_cpufreq_pdata,
+ },
+};
+
+/* Synopsys Ethernet GMAC */
+static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
+ .phy_mask = 0,
+};
+
+static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
+ .pbl = 1,
+};
+
+int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
+{
+ struct plat_stmmacenet_data *plat_dat = NULL;
+ u32 val;
+
+ val = __raw_readl(LS1X_MUX_CTRL1);
+
+ plat_dat = dev_get_platdata(&pdev->dev);
+ if (plat_dat->bus_id) {
+ __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
+ GMAC1_USE_UART0, LS1X_MUX_CTRL0);
+ switch (plat_dat->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
+ break;
+ default:
+ pr_err("unsupported mii mode %d\n",
+ plat_dat->interface);
+ return -ENOTSUPP;
+ }
+ val &= ~GMAC1_SHUT;
+ } else {
+ switch (plat_dat->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
+ break;
+ default:
+ pr_err("unsupported mii mode %d\n",
+ plat_dat->interface);
+ return -ENOTSUPP;
+ }
+ val &= ~GMAC0_SHUT;
+ }
+ __raw_writel(val, LS1X_MUX_CTRL1);
+
+ return 0;
+}
+
+static struct plat_stmmacenet_data ls1x_eth0_pdata = {
+ .bus_id = 0,
+ .phy_addr = -1,
+ .interface = PHY_INTERFACE_MODE_MII,
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .init = ls1x_eth_mux_init,
+};
+
+static struct resource ls1x_eth0_resources[] = {
+ [0] = {
+ .start = LS1X_GMAC0_BASE,
+ .end = LS1X_GMAC0_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "macirq",
+ .start = LS1X_GMAC0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_eth0_pdev = {
+ .name = "stmmaceth",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ls1x_eth0_resources),
+ .resource = ls1x_eth0_resources,
+ .dev = {
+ .platform_data = &ls1x_eth0_pdata,
+ },
+};
+
+static struct plat_stmmacenet_data ls1x_eth1_pdata = {
+ .bus_id = 1,
+ .phy_addr = -1,
+ .interface = PHY_INTERFACE_MODE_MII,
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .init = ls1x_eth_mux_init,
+};
+
+static struct resource ls1x_eth1_resources[] = {
+ [0] = {
+ .start = LS1X_GMAC1_BASE,
+ .end = LS1X_GMAC1_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "macirq",
+ .start = LS1X_GMAC1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_eth1_pdev = {
+ .name = "stmmaceth",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ls1x_eth1_resources),
+ .resource = ls1x_eth1_resources,
+ .dev = {
+ .platform_data = &ls1x_eth1_pdata,
+ },
+};
+
+/* USB EHCI */
+static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ls1x_ehci_resources[] = {
+ [0] = {
+ .start = LS1X_EHCI_BASE,
+ .end = LS1X_EHCI_BASE + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LS1X_EHCI_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct usb_ehci_pdata ls1x_ehci_pdata = {
+};
+
+struct platform_device ls1x_ehci_pdev = {
+ .name = "ehci-platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_ehci_resources),
+ .resource = ls1x_ehci_resources,
+ .dev = {
+ .dma_mask = &ls1x_ehci_dmamask,
+ .platform_data = &ls1x_ehci_pdata,
+ },
+};
+
+/* Real Time Clock */
+struct platform_device ls1x_rtc_pdev = {
+ .name = "ls1x-rtc",
+ .id = -1,
+};
--- /dev/null
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Modified from arch/mips/pnx833x/common/prom.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/bootinfo.h>
+
+#include <loongson1.h>
+#include <prom.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+unsigned long memsize, highmemsize;
+
+char *prom_getenv(char *envname)
+{
+ char **env = prom_envp;
+ int i;
+
+ i = strlen(envname);
+
+ while (*env) {
+ if (strncmp(envname, *env, i) == 0 && *(*env + i) == '=')
+ return *env + i + 1;
+ env++;
+ }
+
+ return 0;
+}
+
+static inline unsigned long env_or_default(char *env, unsigned long dfl)
+{
+ char *str = prom_getenv(env);
+ return str ? simple_strtol(str, 0, 0) : dfl;
+}
+
+void __init prom_init_cmdline(void)
+{
+ char *c = &(arcs_cmdline[0]);
+ int i;
+
+ for (i = 1; i < prom_argc; i++) {
+ strcpy(c, prom_argv[i]);
+ c += strlen(prom_argv[i]);
+ if (i < prom_argc - 1)
+ *c++ = ' ';
+ }
+ *c = 0;
+}
+
+void __init prom_init(void)
+{
+ void __iomem *uart_base;
+ prom_argc = fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
+
+ prom_init_cmdline();
+
+ memsize = env_or_default("memsize", DEFAULT_MEMSIZE);
+ highmemsize = env_or_default("highmemsize", 0x0);
+
+ if (strstr(arcs_cmdline, "console=ttyS3"))
+ uart_base = ioremap_nocache(LS1X_UART3_BASE, 0x0f);
+ else if (strstr(arcs_cmdline, "console=ttyS2"))
+ uart_base = ioremap_nocache(LS1X_UART2_BASE, 0x0f);
+ else if (strstr(arcs_cmdline, "console=ttyS1"))
+ uart_base = ioremap_nocache(LS1X_UART1_BASE, 0x0f);
+ else
+ uart_base = ioremap_nocache(LS1X_UART0_BASE, 0x0f);
+ setup_8250_early_printk_port((unsigned long)uart_base, 0, 0);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
--- /dev/null
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <asm/idle.h>
+#include <asm/reboot.h>
+
+#include <loongson1.h>
+
+static void __iomem *wdt_base;
+
+static void ls1x_halt(void)
+{
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
+}
+
+static void ls1x_restart(char *command)
+{
+ __raw_writel(0x1, wdt_base + WDT_EN);
+ __raw_writel(0x1, wdt_base + WDT_TIMER);
+ __raw_writel(0x1, wdt_base + WDT_SET);
+
+ ls1x_halt();
+}
+
+static void ls1x_power_off(void)
+{
+ ls1x_halt();
+}
+
+static int __init ls1x_reboot_setup(void)
+{
+ wdt_base = ioremap_nocache(LS1X_WDT_BASE, 0x0f);
+ if (!wdt_base)
+ panic("Failed to remap watchdog registers");
+
+ _machine_restart = ls1x_restart;
+ _machine_halt = ls1x_halt;
+ pm_power_off = ls1x_power_off;
+
+ return 0;
+}
+
+arch_initcall(ls1x_reboot_setup);
--- /dev/null
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bootinfo.h>
+
+#include <prom.h>
+
+void __init plat_mem_setup(void)
+{
+ add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+}
+
+const char *get_system_type(void)
+{
+ unsigned int processor_id = (¤t_cpu_data)->processor_id;
+
+ switch (processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON1B:
+ return "LOONGSON LS1B";
+ default:
+ return "LOONGSON (unknown)";
+ }
+}
--- /dev/null
+/*
+ * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <asm/time.h>
+
+#include <loongson1.h>
+#include <platform.h>
+
+#ifdef CONFIG_CEVT_CSRC_LS1X
+
+#if defined(CONFIG_TIMER_USE_PWM1)
+#define LS1X_TIMER_BASE LS1X_PWM1_BASE
+#define LS1X_TIMER_IRQ LS1X_PWM1_IRQ
+
+#elif defined(CONFIG_TIMER_USE_PWM2)
+#define LS1X_TIMER_BASE LS1X_PWM2_BASE
+#define LS1X_TIMER_IRQ LS1X_PWM2_IRQ
+
+#elif defined(CONFIG_TIMER_USE_PWM3)
+#define LS1X_TIMER_BASE LS1X_PWM3_BASE
+#define LS1X_TIMER_IRQ LS1X_PWM3_IRQ
+
+#else
+#define LS1X_TIMER_BASE LS1X_PWM0_BASE
+#define LS1X_TIMER_IRQ LS1X_PWM0_IRQ
+#endif
+
+DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
+
+static void __iomem *timer_base;
+static uint32_t ls1x_jiffies_per_tick;
+
+static inline void ls1x_pwmtimer_set_period(uint32_t period)
+{
+ __raw_writel(period, timer_base + PWM_HRC);
+ __raw_writel(period, timer_base + PWM_LRC);
+}
+
+static inline void ls1x_pwmtimer_restart(void)
+{
+ __raw_writel(0x0, timer_base + PWM_CNT);
+ __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
+}
+
+void __init ls1x_pwmtimer_init(void)
+{
+ timer_base = ioremap(LS1X_TIMER_BASE, 0xf);
+ if (!timer_base)
+ panic("Failed to remap timer registers");
+
+ ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
+
+ ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
+ ls1x_pwmtimer_restart();
+}
+
+static cycle_t ls1x_clocksource_read(struct clocksource *cs)
+{
+ unsigned long flags;
+ int count;
+ u32 jifs;
+ static int old_count;
+ static u32 old_jifs;
+
+ raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
+ /*
+ * Although our caller may have the read side of xtime_lock,
+ * this is now a seqlock, and we are cheating in this routine
+ * by having side effects on state that we cannot undo if
+ * there is a collision on the seqlock and our caller has to
+ * retry. (Namely, old_jifs and old_count.) So we must treat
+ * jiffies as volatile despite the lock. We read jiffies
+ * before latching the timer count to guarantee that although
+ * the jiffies value might be older than the count (that is,
+ * the counter may underflow between the last point where
+ * jiffies was incremented and the point where we latch the
+ * count), it cannot be newer.
+ */
+ jifs = jiffies;
+ /* read the count */
+ count = __raw_readl(timer_base + PWM_CNT);
+
+ /*
+ * It's possible for count to appear to go the wrong way for this
+ * reason:
+ *
+ * The timer counter underflows, but we haven't handled the resulting
+ * interrupt and incremented jiffies yet.
+ *
+ * Previous attempts to handle these cases intelligently were buggy, so
+ * we just do the simple thing now.
+ */
+ if (count < old_count && jifs == old_jifs)
+ count = old_count;
+
+ old_count = count;
+ old_jifs = jifs;
+
+ raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
+
+ return (cycle_t) (jifs * ls1x_jiffies_per_tick) + count;
+}
+
+static struct clocksource ls1x_clocksource = {
+ .name = "ls1x-pwmtimer",
+ .read = ls1x_clocksource_read,
+ .mask = CLOCKSOURCE_MASK(24),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static irqreturn_t ls1x_clockevent_isr(int irq, void *devid)
+{
+ struct clock_event_device *cd = devid;
+
+ ls1x_pwmtimer_restart();
+ cd->event_handler(cd);
+
+ return IRQ_HANDLED;
+}
+
+static void ls1x_clockevent_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *cd)
+{
+ raw_spin_lock(&ls1x_timer_lock);
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
+ ls1x_pwmtimer_restart();
+ case CLOCK_EVT_MODE_RESUME:
+ __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ __raw_writel(__raw_readl(timer_base + PWM_CTRL) & ~CNT_EN,
+ timer_base + PWM_CTRL);
+ break;
+ default:
+ break;
+ }
+ raw_spin_unlock(&ls1x_timer_lock);
+}
+
+static int ls1x_clockevent_set_next(unsigned long evt,
+ struct clock_event_device *cd)
+{
+ raw_spin_lock(&ls1x_timer_lock);
+ ls1x_pwmtimer_set_period(evt);
+ ls1x_pwmtimer_restart();
+ raw_spin_unlock(&ls1x_timer_lock);
+
+ return 0;
+}
+
+static struct clock_event_device ls1x_clockevent = {
+ .name = "ls1x-pwmtimer",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .rating = 300,
+ .irq = LS1X_TIMER_IRQ,
+ .set_next_event = ls1x_clockevent_set_next,
+ .set_mode = ls1x_clockevent_set_mode,
+};
+
+static struct irqaction ls1x_pwmtimer_irqaction = {
+ .name = "ls1x-pwmtimer",
+ .handler = ls1x_clockevent_isr,
+ .dev_id = &ls1x_clockevent,
+ .flags = IRQF_PERCPU | IRQF_TIMER,
+};
+
+static void __init ls1x_time_init(void)
+{
+ struct clock_event_device *cd = &ls1x_clockevent;
+ int ret;
+
+ if (!mips_hpt_frequency)
+ panic("Invalid timer clock rate");
+
+ ls1x_pwmtimer_init();
+
+ clockevent_set_clock(cd, mips_hpt_frequency);
+ cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(0x000300, cd);
+ cd->cpumask = cpumask_of(smp_processor_id());
+ clockevents_register_device(cd);
+
+ ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000;
+ ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency);
+ if (ret)
+ panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
+
+ setup_irq(LS1X_TIMER_IRQ, &ls1x_pwmtimer_irqaction);
+}
+#endif /* CONFIG_CEVT_CSRC_LS1X */
+
+void __init plat_time_init(void)
+{
+ struct clk *clk = NULL;
+
+ /* initialize LS1X clocks */
+ ls1x_clk_init();
+
+#ifdef CONFIG_CEVT_CSRC_LS1X
+ /* setup LS1X PWM timer */
+ clk = clk_get(NULL, "ls1x_pwmtimer");
+ if (IS_ERR(clk))
+ panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
+
+ mips_hpt_frequency = clk_get_rate(clk);
+ ls1x_time_init();
+#else
+ /* setup mips r4k timer */
+ clk = clk_get(NULL, "cpu_clk");
+ if (IS_ERR(clk))
+ panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
+
+ mips_hpt_frequency = clk_get_rate(clk) / 2;
+#endif /* CONFIG_CEVT_CSRC_LS1X */
+}
--- /dev/null
+#
+# Makefile for loongson1B based machines.
+#
+
+obj-y += board.o
--- /dev/null
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <platform.h>
+
+static struct platform_device *ls1b_platform_devices[] __initdata = {
+ &ls1x_uart_pdev,
+ &ls1x_cpufreq_pdev,
+ &ls1x_eth0_pdev,
+ &ls1x_eth1_pdev,
+ &ls1x_ehci_pdev,
+ &ls1x_rtc_pdev,
+};
+
+static int __init ls1b_platform_init(void)
+{
+ int err;
+
+ ls1x_serial_setup(&ls1x_uart_pdev);
+
+ err = platform_add_devices(ls1b_platform_devices,
+ ARRAY_SIZE(ls1b_platform_devices));
+ return err;
+}
+
+arch_initcall(ls1b_platform_init);
--- /dev/null
+if MACH_LOONGSON64
+
+choice
+ prompt "Machine Type"
+
+config LEMOTE_FULOONG2E
+ bool "Lemote Fuloong(2e) mini-PC"
+ select ARCH_SPARSEMEM_ENABLE
+ select CEVT_R4K
+ select CSRC_R4K
+ select SYS_HAS_CPU_LOONGSON2E
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select BOARD_SCACHE
+ select HW_HAS_PCI
+ select I8259
+ select ISA
+ select IRQ_MIPS_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_HAS_EARLY_PRINTK
+ select GENERIC_ISA_DMA_SUPPORT_BROKEN
+ select CPU_HAS_WB
+ select LOONGSON_MC146818
+ help
+ Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
+ an FPGA northbridge
+
+ Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
+
+config LEMOTE_MACH2F
+ bool "Lemote Loongson 2F family machines"
+ select ARCH_SPARSEMEM_ENABLE
+ select BOARD_SCACHE
+ select BOOT_ELF32
+ select CEVT_R4K if ! MIPS_EXTERNAL_TIMER
+ select CPU_HAS_WB
+ select CS5536
+ select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
+ select DMA_NONCOHERENT
+ select GENERIC_ISA_DMA_SUPPORT_BROKEN
+ select HAVE_CLK
+ select HW_HAS_PCI
+ select I8259
+ select IRQ_MIPS_CPU
+ select ISA
+ select SYS_HAS_CPU_LOONGSON2F
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select LOONGSON_MC146818
+ help
+ Lemote Loongson 2F family machines utilize the 2F revision of
+ Loongson processor and the AMD CS5536 south bridge.
+
+ These family machines include fuloong2f mini PC, yeeloong2f notebook,
+ LingLoong allinone PC and so forth.
+
+config LOONGSON_MACH3X
+ bool "Generic Loongson 3 family machines"
+ select ARCH_SPARSEMEM_ENABLE
+ select GENERIC_ISA_DMA_SUPPORT_BROKEN
+ select BOOT_ELF32
+ select BOARD_SCACHE
+ select CSRC_R4K
+ select CEVT_R4K
+ select CPU_HAS_WB
+ select HW_HAS_PCI
+ select ISA
+ select HT_PCI
+ select I8259
+ select IRQ_MIPS_CPU
+ select NR_CPUS_DEFAULT_4
+ select SYS_HAS_CPU_LOONGSON3
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_HOTPLUG_CPU
+ select SYS_SUPPORTS_NUMA
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select LOONGSON_MC146818
+ select ZONE_DMA32
+ select LEFI_FIRMWARE_INTERFACE
+ select PHYS48_TO_HT40
+ help
+ Generic Loongson 3 family machines utilize the 3A/3B revision
+ of Loongson processor and RS780/SBX00 chipset.
+endchoice
+
+config CS5536
+ bool
+
+config CS5536_MFGPT
+ bool "CS5536 MFGPT Timer"
+ depends on CS5536 && !HIGH_RES_TIMERS
+ select MIPS_EXTERNAL_TIMER
+ help
+ This option enables the mfgpt0 timer of AMD CS5536. With this timer
+ switched on you can not use high resolution timers.
+
+ If you want to enable the Loongson2 CPUFreq Driver, Please enable
+ this option at first, otherwise, You will get wrong system time.
+
+ If unsure, say Yes.
+
+config RS780_HPET
+ bool "RS780/SBX00 HPET Timer"
+ depends on LOONGSON_MACH3X
+ select MIPS_EXTERNAL_TIMER
+ help
+ This option enables the hpet timer of AMD RS780/SBX00.
+
+ If you want to enable the Loongson3 CPUFreq Driver, Please enable
+ this option at first, otherwise, You will get wrong system time.
+
+ If unsure, say Yes.
+
+config LOONGSON_SUSPEND
+ bool
+ default y
+ depends on CPU_SUPPORTS_CPUFREQ && SUSPEND
+
+config LOONGSON_UART_BASE
+ bool
+ default y
+ depends on EARLY_PRINTK || SERIAL_8250
+
+config IOMMU_HELPER
+ bool
+
+config NEED_SG_DMA_LENGTH
+ bool
+
+config SWIOTLB
+ bool "Soft IOMMU Support for All-Memory DMA"
+ default y
+ depends on CPU_LOONGSON3
+ select IOMMU_HELPER
+ select NEED_SG_DMA_LENGTH
+ select NEED_DMA_MAP_STATE
+
+config PHYS48_TO_HT40
+ bool
+ default y if CPU_LOONGSON3
+
+config LOONGSON_MC146818
+ bool
+ default n
+
+config LEFI_FIRMWARE_INTERFACE
+ bool
+
+endif # MACH_LOONGSON64
--- /dev/null
+#
+# Common code for all Loongson based systems
+#
+
+obj-$(CONFIG_MACH_LOONGSON64) += common/
+
+#
+# Lemote Fuloong mini-PC (Loongson 2E-based)
+#
+
+obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/
+
+#
+# Lemote loongson2f family machines
+#
+
+obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/
+
+#
+# All Loongson-3 family machines
+#
+
+obj-$(CONFIG_CPU_LOONGSON3) += loongson-3/
--- /dev/null
+#
+# Loongson Processors' Support
+#
+
+# Only gcc >= 4.4 have Loongson specific support
+cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2E) += \
+ $(call cc-option,-march=loongson2e,-march=r4600)
+cflags-$(CONFIG_CPU_LOONGSON2F) += \
+ $(call cc-option,-march=loongson2f,-march=r4600)
+# Enable the workarounds for Loongson2f
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+ ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
+ $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
+ else
+ cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
+ endif
+ ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
+ $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
+ else
+ cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
+ endif
+endif
+
+#
+# Loongson Machines' Support
+#
+
+platform-$(CONFIG_MACH_LOONGSON64) += loongson64/
+cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely
+load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
+load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
+load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000
--- /dev/null
+#
+# Makefile for loongson based machines.
+#
+
+obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
+ bonito-irq.o mem.o machtype.o platform.o serial.o
+obj-$(CONFIG_PCI) += pci.o
+
+#
+# Serial port support
+#
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
+obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
+
+#
+# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
+# space
+#
+obj-$(CONFIG_CS5536) += cs5536/
+
+#
+# Suspend Support
+#
+
+obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
+
+#
+# Big Memory (SWIOTLB) Support
+#
+obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
--- /dev/null
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/interrupt.h>
+#include <linux/compiler.h>
+
+#include <loongson.h>
+
+static inline void bonito_irq_enable(struct irq_data *d)
+{
+ LOONGSON_INTENSET = (1 << (d->irq - LOONGSON_IRQ_BASE));
+ mmiowb();
+}
+
+static inline void bonito_irq_disable(struct irq_data *d)
+{
+ LOONGSON_INTENCLR = (1 << (d->irq - LOONGSON_IRQ_BASE));
+ mmiowb();
+}
+
+static struct irq_chip bonito_irq_type = {
+ .name = "bonito_irq",
+ .irq_mask = bonito_irq_disable,
+ .irq_unmask = bonito_irq_enable,
+};
+
+static struct irqaction __maybe_unused dma_timeout_irqaction = {
+ .handler = no_action,
+ .name = "dma_timeout",
+};
+
+void bonito_irq_init(void)
+{
+ u32 i;
+
+ for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++)
+ irq_set_chip_and_handler(i, &bonito_irq_type,
+ handle_level_irq);
+
+#ifdef CONFIG_CPU_LOONGSON2E
+ setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
+#endif
+}
--- /dev/null
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+void __init prom_init_cmdline(void)
+{
+ int prom_argc;
+ /* pmon passes arguments in 32bit pointers */
+ int *_prom_argv;
+ int i;
+ long l;
+
+ /* firmware arguments are initialized in head.S */
+ prom_argc = fw_arg0;
+ _prom_argv = (int *)fw_arg1;
+
+ /* arg[0] is "g", the rest is boot parameters */
+ arcs_cmdline[0] = '\0';
+ for (i = 1; i < prom_argc; i++) {
+ l = (long)_prom_argv[i];
+ if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
+ >= sizeof(arcs_cmdline))
+ break;
+ strcat(arcs_cmdline, ((char *)l));
+ strcat(arcs_cmdline, " ");
+ }
+
+ prom_init_machtype();
+}
--- /dev/null
+#
+# Makefile for CS5536 support.
+#
+
+obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \
+ cs5536_isa.o cs5536_ehci.o
+
+#
+# Enable cs5536 mfgpt Timer
+#
+obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o
--- /dev/null
+/*
+ * the ACC Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_acc_write_reg(int reg, u32 value)
+{
+ u32 hi = 0, lo = value;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+ if (value & PCI_COMMAND_MASTER)
+ lo |= (0x03 << 8);
+ else
+ lo &= ~(0x03 << 8);
+ _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
+ break;
+ case PCI_STATUS:
+ if (value & PCI_STATUS_PARITY) {
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG) {
+ lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+ _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+ }
+ }
+ break;
+ case PCI_BAR0_REG:
+ if (value == PCI_BAR_RANGE_MASK) {
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ lo |= SOFT_BAR_ACC_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else if (value & 0x01) {
+ value &= 0xfffffffc;
+ hi = 0xA0000000 | ((value & 0x000ff000) >> 12);
+ lo = 0x000fff80 | ((value & 0x00000fff) << 20);
+ _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo);
+ }
+ break;
+ case PCI_ACC_INT_REG:
+ _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+ /* disable all the usb interrupt in PIC */
+ lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT);
+ if (value) /* enable all the acc interrupt in PIC */
+ lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT);
+ _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
+ break;
+ default:
+ break;
+ }
+}
+
+u32 pci_acc_read_reg(int reg)
+{
+ u32 hi, lo;
+ u32 conf_data = 0;
+
+ switch (reg) {
+ case PCI_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID);
+ break;
+ case PCI_COMMAND:
+ _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
+ if (((lo & 0xfff00000) || (hi & 0x000000ff))
+ && ((hi & 0xf0000000) == 0xa0000000))
+ conf_data |= PCI_COMMAND_IO;
+ _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+ if ((lo & 0x300) == 0x300)
+ conf_data |= PCI_COMMAND_MASTER;
+ break;
+ case PCI_STATUS:
+ conf_data |= PCI_STATUS_66MHZ;
+ conf_data |= PCI_STATUS_FAST_BACK;
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG)
+ conf_data |= PCI_STATUS_PARITY;
+ conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+ break;
+ case PCI_CLASS_REVISION:
+ _rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo);
+ conf_data = lo & 0x000000ff;
+ conf_data |= (CS5536_ACC_CLASS_CODE << 8);
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ conf_data =
+ CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+ PCI_NORMAL_LATENCY_TIMER);
+ break;
+ case PCI_BAR0_REG:
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ if (lo & SOFT_BAR_ACC_FLAG) {
+ conf_data = CS5536_ACC_RANGE |
+ PCI_BASE_ADDRESS_SPACE_IO;
+ lo &= ~SOFT_BAR_ACC_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else {
+ _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
+ conf_data = (hi & 0x000000ff) << 12;
+ conf_data |= (lo & 0xfff00000) >> 20;
+ conf_data |= 0x01;
+ conf_data &= ~0x02;
+ }
+ break;
+ case PCI_CARDBUS_CIS:
+ conf_data = PCI_CARDBUS_CIS_POINTER;
+ break;
+ case PCI_SUBSYSTEM_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID);
+ break;
+ case PCI_ROM_ADDRESS:
+ conf_data = PCI_EXPANSION_ROM_BAR;
+ break;
+ case PCI_CAPABILITY_LIST:
+ conf_data = PCI_CAPLIST_USB_POINTER;
+ break;
+ case PCI_INTERRUPT_LINE:
+ conf_data =
+ CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR);
+ break;
+ default:
+ break;
+ }
+
+ return conf_data;
+}
--- /dev/null
+/*
+ * the EHCI Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_ehci_write_reg(int reg, u32 value)
+{
+ u32 hi = 0, lo = value;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ if (value & PCI_COMMAND_MASTER)
+ hi |= PCI_COMMAND_MASTER;
+ else
+ hi &= ~PCI_COMMAND_MASTER;
+
+ if (value & PCI_COMMAND_MEMORY)
+ hi |= PCI_COMMAND_MEMORY;
+ else
+ hi &= ~PCI_COMMAND_MEMORY;
+ _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+ break;
+ case PCI_STATUS:
+ if (value & PCI_STATUS_PARITY) {
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG) {
+ lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+ _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+ }
+ }
+ break;
+ case PCI_BAR0_REG:
+ if (value == PCI_BAR_RANGE_MASK) {
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ lo |= SOFT_BAR_EHCI_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else if ((value & 0x01) == 0x00) {
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ lo = value;
+ _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+
+ value &= 0xfffffff0;
+ hi = 0x40000000 | ((value & 0xff000000) >> 24);
+ lo = 0x000fffff | ((value & 0x00fff000) << 8);
+ _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo);
+ }
+ break;
+ case PCI_EHCI_LEGSMIEN_REG:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ hi &= 0x003f0000;
+ hi |= (value & 0x3f) << 16;
+ _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+ break;
+ case PCI_EHCI_FLADJ_REG:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ hi &= ~0x00003f00;
+ hi |= value & 0x00003f00;
+ _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+ break;
+ default:
+ break;
+ }
+}
+
+u32 pci_ehci_read_reg(int reg)
+{
+ u32 conf_data = 0;
+ u32 hi, lo;
+
+ switch (reg) {
+ case PCI_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID);
+ break;
+ case PCI_COMMAND:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ if (hi & PCI_COMMAND_MASTER)
+ conf_data |= PCI_COMMAND_MASTER;
+ if (hi & PCI_COMMAND_MEMORY)
+ conf_data |= PCI_COMMAND_MEMORY;
+ break;
+ case PCI_STATUS:
+ conf_data |= PCI_STATUS_66MHZ;
+ conf_data |= PCI_STATUS_FAST_BACK;
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG)
+ conf_data |= PCI_STATUS_PARITY;
+ conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+ break;
+ case PCI_CLASS_REVISION:
+ _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
+ conf_data = lo & 0x000000ff;
+ conf_data |= (CS5536_EHCI_CLASS_CODE << 8);
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ conf_data =
+ CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+ PCI_NORMAL_LATENCY_TIMER);
+ break;
+ case PCI_BAR0_REG:
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ if (lo & SOFT_BAR_EHCI_FLAG) {
+ conf_data = CS5536_EHCI_RANGE |
+ PCI_BASE_ADDRESS_SPACE_MEMORY;
+ lo &= ~SOFT_BAR_EHCI_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else {
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ conf_data = lo & 0xfffff000;
+ }
+ break;
+ case PCI_CARDBUS_CIS:
+ conf_data = PCI_CARDBUS_CIS_POINTER;
+ break;
+ case PCI_SUBSYSTEM_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
+ break;
+ case PCI_ROM_ADDRESS:
+ conf_data = PCI_EXPANSION_ROM_BAR;
+ break;
+ case PCI_CAPABILITY_LIST:
+ conf_data = PCI_CAPLIST_USB_POINTER;
+ break;
+ case PCI_INTERRUPT_LINE:
+ conf_data =
+ CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
+ break;
+ case PCI_EHCI_LEGSMIEN_REG:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ conf_data = (hi & 0x003f0000) >> 16;
+ break;
+ case PCI_EHCI_LEGSMISTS_REG:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ conf_data = (hi & 0x3f000000) >> 24;
+ break;
+ case PCI_EHCI_FLADJ_REG:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ conf_data = hi & 0x00003f00;
+ break;
+ default:
+ break;
+ }
+
+ return conf_data;
+}
--- /dev/null
+/*
+ * the IDE Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_ide_write_reg(int reg, u32 value)
+{
+ u32 hi = 0, lo = value;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+ if (value & PCI_COMMAND_MASTER)
+ lo |= (0x03 << 4);
+ else
+ lo &= ~(0x03 << 4);
+ _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
+ break;
+ case PCI_STATUS:
+ if (value & PCI_STATUS_PARITY) {
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG) {
+ lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+ _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+ }
+ }
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ value &= 0x0000ff00;
+ _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+ hi &= 0xffffff00;
+ hi |= (value >> 8);
+ _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
+ break;
+ case PCI_BAR4_REG:
+ if (value == PCI_BAR_RANGE_MASK) {
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ lo |= SOFT_BAR_IDE_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else if (value & 0x01) {
+ _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
+ lo = (value & 0xfffffff0) | 0x1;
+ _wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
+
+ value &= 0xfffffffc;
+ hi = 0x60000000 | ((value & 0x000ff000) >> 12);
+ lo = 0x000ffff0 | ((value & 0x00000fff) << 20);
+ _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo);
+ }
+ break;
+ case PCI_IDE_CFG_REG:
+ if (value == CS5536_IDE_FLASH_SIGNATURE) {
+ _rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
+ lo |= 0x01;
+ _wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
+ } else {
+ _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
+ lo = value;
+ _wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
+ }
+ break;
+ case PCI_IDE_DTC_REG:
+ _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
+ lo = value;
+ _wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
+ break;
+ case PCI_IDE_CAST_REG:
+ _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
+ lo = value;
+ _wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
+ break;
+ case PCI_IDE_ETC_REG:
+ _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
+ lo = value;
+ _wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
+ break;
+ case PCI_IDE_PM_REG:
+ _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
+ lo = value;
+ _wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
+ break;
+ default:
+ break;
+ }
+}
+
+u32 pci_ide_read_reg(int reg)
+{
+ u32 conf_data = 0;
+ u32 hi, lo;
+
+ switch (reg) {
+ case PCI_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID);
+ break;
+ case PCI_COMMAND:
+ _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
+ if (lo & 0xfffffff0)
+ conf_data |= PCI_COMMAND_IO;
+ _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+ if ((lo & 0x30) == 0x30)
+ conf_data |= PCI_COMMAND_MASTER;
+ break;
+ case PCI_STATUS:
+ conf_data |= PCI_STATUS_66MHZ;
+ conf_data |= PCI_STATUS_FAST_BACK;
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG)
+ conf_data |= PCI_STATUS_PARITY;
+ conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+ break;
+ case PCI_CLASS_REVISION:
+ _rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo);
+ conf_data = lo & 0x000000ff;
+ conf_data |= (CS5536_IDE_CLASS_CODE << 8);
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+ hi &= 0x000000f8;
+ conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi);
+ break;
+ case PCI_BAR4_REG:
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ if (lo & SOFT_BAR_IDE_FLAG) {
+ conf_data = CS5536_IDE_RANGE |
+ PCI_BASE_ADDRESS_SPACE_IO;
+ lo &= ~SOFT_BAR_IDE_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else {
+ _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
+ conf_data = lo & 0xfffffff0;
+ conf_data |= 0x01;
+ conf_data &= ~0x02;
+ }
+ break;
+ case PCI_CARDBUS_CIS:
+ conf_data = PCI_CARDBUS_CIS_POINTER;
+ break;
+ case PCI_SUBSYSTEM_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID);
+ break;
+ case PCI_ROM_ADDRESS:
+ conf_data = PCI_EXPANSION_ROM_BAR;
+ break;
+ case PCI_CAPABILITY_LIST:
+ conf_data = PCI_CAPLIST_POINTER;
+ break;
+ case PCI_INTERRUPT_LINE:
+ conf_data =
+ CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR);
+ break;
+ case PCI_IDE_CFG_REG:
+ _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
+ conf_data = lo;
+ break;
+ case PCI_IDE_DTC_REG:
+ _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
+ conf_data = lo;
+ break;
+ case PCI_IDE_CAST_REG:
+ _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
+ conf_data = lo;
+ break;
+ case PCI_IDE_ETC_REG:
+ _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
+ conf_data = lo;
+ break;
+ case PCI_IDE_PM_REG:
+ _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
+ conf_data = lo;
+ break;
+ default:
+ break;
+ }
+
+ return conf_data;
+}
--- /dev/null
+/*
+ * the ISA Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+/* common variables for PCI_ISA_READ/WRITE_BAR */
+static const u32 divil_msr_reg[6] = {
+ DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO),
+ DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ),
+ DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI),
+};
+
+static const u32 soft_bar_flag[6] = {
+ SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG,
+ SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG,
+};
+
+static const u32 sb_msr_reg[6] = {
+ SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2),
+ SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5),
+};
+
+static const u32 bar_space_range[6] = {
+ CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE,
+ CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE,
+};
+
+static const int bar_space_len[6] = {
+ CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH,
+ CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH,
+};
+
+/*
+ * enable the divil module bar space.
+ *
+ * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg
+ * and the RCONFx(0~5) reg to use the modules.
+ */
+static void divil_lbar_enable(void)
+{
+ u32 hi, lo;
+ int offset;
+
+ /*
+ * The DIVIL IRQ is not used yet. and make the RCONF0 reserved.
+ */
+
+ for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
+ _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
+ hi |= 0x01;
+ _wrmsr(DIVIL_MSR_REG(offset), hi, lo);
+ }
+}
+
+/*
+ * disable the divil module bar space.
+ */
+static void divil_lbar_disable(void)
+{
+ u32 hi, lo;
+ int offset;
+
+ for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
+ _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
+ hi &= ~0x01;
+ _wrmsr(DIVIL_MSR_REG(offset), hi, lo);
+ }
+}
+
+/*
+ * BAR write: write value to the n BAR
+ */
+
+void pci_isa_write_bar(int n, u32 value)
+{
+ u32 hi = 0, lo = value;
+
+ if (value == PCI_BAR_RANGE_MASK) {
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ lo |= soft_bar_flag[n];
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else if (value & 0x01) {
+ /* NATIVE reg */
+ hi = 0x0000f001;
+ lo &= bar_space_range[n];
+ _wrmsr(divil_msr_reg[n], hi, lo);
+
+ /* RCONFx is 4bytes in units for I/O space */
+ hi = ((value & 0x000ffffc) << 12) |
+ ((bar_space_len[n] - 4) << 12) | 0x01;
+ lo = ((value & 0x000ffffc) << 12) | 0x01;
+ _wrmsr(sb_msr_reg[n], hi, lo);
+ }
+}
+
+/*
+ * BAR read: read the n BAR
+ */
+
+u32 pci_isa_read_bar(int n)
+{
+ u32 conf_data = 0;
+ u32 hi, lo;
+
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ if (lo & soft_bar_flag[n]) {
+ conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO;
+ lo &= ~soft_bar_flag[n];
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else {
+ _rdmsr(divil_msr_reg[n], &hi, &lo);
+ conf_data = lo & bar_space_range[n];
+ conf_data |= 0x01;
+ conf_data &= ~0x02;
+ }
+ return conf_data;
+}
+
+/*
+ * isa_write: ISA write transfer
+ *
+ * We assume that this is not a bus master transfer.
+ */
+void pci_isa_write_reg(int reg, u32 value)
+{
+ u32 hi = 0, lo = value;
+ u32 temp;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ if (value & PCI_COMMAND_IO)
+ divil_lbar_enable();
+ else
+ divil_lbar_disable();
+ break;
+ case PCI_STATUS:
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ temp = lo & 0x0000ffff;
+ if ((value & PCI_STATUS_SIG_TARGET_ABORT) &&
+ (lo & SB_TAS_ERR_EN))
+ temp |= SB_TAS_ERR_FLAG;
+
+ if ((value & PCI_STATUS_REC_TARGET_ABORT) &&
+ (lo & SB_TAR_ERR_EN))
+ temp |= SB_TAR_ERR_FLAG;
+
+ if ((value & PCI_STATUS_REC_MASTER_ABORT)
+ && (lo & SB_MAR_ERR_EN))
+ temp |= SB_MAR_ERR_FLAG;
+
+ if ((value & PCI_STATUS_DETECTED_PARITY)
+ && (lo & SB_PARE_ERR_EN))
+ temp |= SB_PARE_ERR_FLAG;
+
+ lo = temp;
+ _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ value &= 0x0000ff00;
+ _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+ hi &= 0xffffff00;
+ hi |= (value >> 8);
+ _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
+ break;
+ case PCI_BAR0_REG:
+ pci_isa_write_bar(0, value);
+ break;
+ case PCI_BAR1_REG:
+ pci_isa_write_bar(1, value);
+ break;
+ case PCI_BAR2_REG:
+ pci_isa_write_bar(2, value);
+ break;
+ case PCI_BAR3_REG:
+ pci_isa_write_bar(3, value);
+ break;
+ case PCI_BAR4_REG:
+ pci_isa_write_bar(4, value);
+ break;
+ case PCI_BAR5_REG:
+ pci_isa_write_bar(5, value);
+ break;
+ case PCI_UART1_INT_REG:
+ _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
+ /* disable uart1 interrupt in PIC */
+ lo &= ~(0xf << 24);
+ if (value) /* enable uart1 interrupt in PIC */
+ lo |= (CS5536_UART1_INTR << 24);
+ _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
+ break;
+ case PCI_UART2_INT_REG:
+ _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
+ /* disable uart2 interrupt in PIC */
+ lo &= ~(0xf << 28);
+ if (value) /* enable uart2 interrupt in PIC */
+ lo |= (CS5536_UART2_INTR << 28);
+ _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
+ break;
+ case PCI_ISA_FIXUP_REG:
+ if (value) {
+ /* enable the TARGET ABORT/MASTER ABORT etc. */
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ lo |= 0x00000063;
+ _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+ }
+
+ default:
+ /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */
+ break;
+ }
+}
+
+/*
+ * isa_read: ISA read transfers
+ *
+ * We assume that this is not a bus master transfer.
+ */
+u32 pci_isa_read_reg(int reg)
+{
+ u32 conf_data = 0;
+ u32 hi, lo;
+
+ switch (reg) {
+ case PCI_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID);
+ break;
+ case PCI_COMMAND:
+ /* we just check the first LBAR for the IO enable bit, */
+ /* maybe we should changed later. */
+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo);
+ if (hi & 0x01)
+ conf_data |= PCI_COMMAND_IO;
+ break;
+ case PCI_STATUS:
+ conf_data |= PCI_STATUS_66MHZ;
+ conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+ conf_data |= PCI_STATUS_FAST_BACK;
+
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_TAS_ERR_FLAG)
+ conf_data |= PCI_STATUS_SIG_TARGET_ABORT;
+ if (lo & SB_TAR_ERR_FLAG)
+ conf_data |= PCI_STATUS_REC_TARGET_ABORT;
+ if (lo & SB_MAR_ERR_FLAG)
+ conf_data |= PCI_STATUS_REC_MASTER_ABORT;
+ if (lo & SB_PARE_ERR_FLAG)
+ conf_data |= PCI_STATUS_DETECTED_PARITY;
+ break;
+ case PCI_CLASS_REVISION:
+ _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo);
+ conf_data = lo & 0x000000ff;
+ conf_data |= (CS5536_ISA_CLASS_CODE << 8);
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+ hi &= 0x000000f8;
+ conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi);
+ break;
+ /*
+ * we only use the LBAR of DIVIL, no RCONF used.
+ * all of them are IO space.
+ */
+ case PCI_BAR0_REG:
+ return pci_isa_read_bar(0);
+ break;
+ case PCI_BAR1_REG:
+ return pci_isa_read_bar(1);
+ break;
+ case PCI_BAR2_REG:
+ return pci_isa_read_bar(2);
+ break;
+ case PCI_BAR3_REG:
+ break;
+ case PCI_BAR4_REG:
+ return pci_isa_read_bar(4);
+ break;
+ case PCI_BAR5_REG:
+ return pci_isa_read_bar(5);
+ break;
+ case PCI_CARDBUS_CIS:
+ conf_data = PCI_CARDBUS_CIS_POINTER;
+ break;
+ case PCI_SUBSYSTEM_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID);
+ break;
+ case PCI_ROM_ADDRESS:
+ conf_data = PCI_EXPANSION_ROM_BAR;
+ break;
+ case PCI_CAPABILITY_LIST:
+ conf_data = PCI_CAPLIST_POINTER;
+ break;
+ case PCI_INTERRUPT_LINE:
+ /* no interrupt used here */
+ conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00);
+ break;
+ default:
+ break;
+ }
+
+ return conf_data;
+}
+
+/*
+ * The mfgpt timer interrupt is running early, so we must keep the south bridge
+ * mmio always enabled. Otherwise we may race with the PCI configuration which
+ * may temporarily disable it. When that happens and the timer interrupt fires,
+ * we are not able to clear it and the system will hang.
+ */
+static void cs5536_isa_mmio_always_on(struct pci_dev *dev)
+{
+ dev->mmio_always_on = 1;
+}
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
+ PCI_CLASS_BRIDGE_ISA, 8, cs5536_isa_mmio_always_on);
--- /dev/null
+/*
+ * CS5536 General timer functions
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Yanhua, yanh@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu zhangjin, wuzhangjin@gmail.com
+ *
+ * Reference: AMD Geode(TM) CS5536 Companion Device Data Book
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+
+#include <asm/time.h>
+
+#include <cs5536/cs5536_mfgpt.h>
+
+static DEFINE_RAW_SPINLOCK(mfgpt_lock);
+
+static u32 mfgpt_base;
+
+/*
+ * Initialize the MFGPT timer.
+ *
+ * This is also called after resume to bring the MFGPT into operation again.
+ */
+
+/* disable counter */
+void disable_mfgpt0_counter(void)
+{
+ outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP);
+}
+EXPORT_SYMBOL(disable_mfgpt0_counter);
+
+/* enable counter, comparator2 to event mode, 14.318MHz clock */
+void enable_mfgpt0_counter(void)
+{
+ outw(0xe310, MFGPT0_SETUP);
+}
+EXPORT_SYMBOL(enable_mfgpt0_counter);
+
+static void init_mfgpt_timer(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ raw_spin_lock(&mfgpt_lock);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ outw(COMPARE, MFGPT0_CMP2); /* set comparator2 */
+ outw(0, MFGPT0_CNT); /* set counter to 0 */
+ enable_mfgpt0_counter();
+ break;
+
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
+ evt->mode == CLOCK_EVT_MODE_ONESHOT)
+ disable_mfgpt0_counter();
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* The oneshot mode have very high deviation, Not use it! */
+ break;
+
+ case CLOCK_EVT_MODE_RESUME:
+ /* Nothing to do here */
+ break;
+ }
+ raw_spin_unlock(&mfgpt_lock);
+}
+
+static struct clock_event_device mfgpt_clockevent = {
+ .name = "mfgpt",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .set_mode = init_mfgpt_timer,
+ .irq = CS5536_MFGPT_INTR,
+};
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ u32 basehi;
+
+ /*
+ * get MFGPT base address
+ *
+ * NOTE: do not remove me, it's need for the value of mfgpt_base is
+ * variable
+ */
+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base);
+
+ /* ack */
+ outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP);
+
+ mfgpt_clockevent.event_handler(&mfgpt_clockevent);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq5 = {
+ .handler = timer_interrupt,
+ .flags = IRQF_NOBALANCING | IRQF_TIMER,
+ .name = "timer"
+};
+
+/*
+ * Initialize the conversion factor and the min/max deltas of the clock event
+ * structure and register the clock event source with the framework.
+ */
+void __init setup_mfgpt0_timer(void)
+{
+ u32 basehi;
+ struct clock_event_device *cd = &mfgpt_clockevent;
+ unsigned int cpu = smp_processor_id();
+
+ cd->cpumask = cpumask_of(cpu);
+ clockevent_set_clock(cd, MFGPT_TICK_RATE);
+ cd->max_delta_ns = clockevent_delta2ns(0xffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(0xf, cd);
+
+ /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */
+ _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100);
+
+ /* Enable Interrupt Gate 5 */
+ _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000);
+
+ /* get MFGPT base address */
+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base);
+
+ clockevents_register_device(cd);
+
+ setup_irq(CS5536_MFGPT_INTR, &irq5);
+}
+
+/*
+ * Since the MFGPT overflows every tick, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static cycle_t mfgpt_read(struct clocksource *cs)
+{
+ unsigned long flags;
+ int count;
+ u32 jifs;
+ static int old_count;
+ static u32 old_jifs;
+
+ raw_spin_lock_irqsave(&mfgpt_lock, flags);
+ /*
+ * Although our caller may have the read side of xtime_lock,
+ * this is now a seqlock, and we are cheating in this routine
+ * by having side effects on state that we cannot undo if
+ * there is a collision on the seqlock and our caller has to
+ * retry. (Namely, old_jifs and old_count.) So we must treat
+ * jiffies as volatile despite the lock. We read jiffies
+ * before latching the timer count to guarantee that although
+ * the jiffies value might be older than the count (that is,
+ * the counter may underflow between the last point where
+ * jiffies was incremented and the point where we latch the
+ * count), it cannot be newer.
+ */
+ jifs = jiffies;
+ /* read the count */
+ count = inw(MFGPT0_CNT);
+
+ /*
+ * It's possible for count to appear to go the wrong way for this
+ * reason:
+ *
+ * The timer counter underflows, but we haven't handled the resulting
+ * interrupt and incremented jiffies yet.
+ *
+ * Previous attempts to handle these cases intelligently were buggy, so
+ * we just do the simple thing now.
+ */
+ if (count < old_count && jifs == old_jifs)
+ count = old_count;
+
+ old_count = count;
+ old_jifs = jifs;
+
+ raw_spin_unlock_irqrestore(&mfgpt_lock, flags);
+
+ return (cycle_t) (jifs * COMPARE) + count;
+}
+
+static struct clocksource clocksource_mfgpt = {
+ .name = "mfgpt",
+ .rating = 120, /* Functional for real use, but not desired */
+ .read = mfgpt_read,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+int __init init_mfgpt_clocksource(void)
+{
+ if (num_possible_cpus() > 1) /* MFGPT does not scale! */
+ return 0;
+
+ return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
+}
+
+arch_initcall(init_mfgpt_clocksource);
--- /dev/null
+/*
+ * the OHCI Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_ohci_write_reg(int reg, u32 value)
+{
+ u32 hi = 0, lo = value;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+ if (value & PCI_COMMAND_MASTER)
+ hi |= PCI_COMMAND_MASTER;
+ else
+ hi &= ~PCI_COMMAND_MASTER;
+
+ if (value & PCI_COMMAND_MEMORY)
+ hi |= PCI_COMMAND_MEMORY;
+ else
+ hi &= ~PCI_COMMAND_MEMORY;
+ _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
+ break;
+ case PCI_STATUS:
+ if (value & PCI_STATUS_PARITY) {
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG) {
+ lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+ _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+ }
+ }
+ break;
+ case PCI_BAR0_REG:
+ if (value == PCI_BAR_RANGE_MASK) {
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ lo |= SOFT_BAR_OHCI_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else if ((value & 0x01) == 0x00) {
+ _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+ lo = value;
+ _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
+
+ value &= 0xfffffff0;
+ hi = 0x40000000 | ((value & 0xff000000) >> 24);
+ lo = 0x000fffff | ((value & 0x00fff000) << 8);
+ _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo);
+ }
+ break;
+ case PCI_OHCI_INT_REG:
+ _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+ lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT);
+ if (value) /* enable all the usb interrupt in PIC */
+ lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT);
+ _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
+ break;
+ default:
+ break;
+ }
+}
+
+u32 pci_ohci_read_reg(int reg)
+{
+ u32 conf_data = 0;
+ u32 hi, lo;
+
+ switch (reg) {
+ case PCI_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID);
+ break;
+ case PCI_COMMAND:
+ _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+ if (hi & PCI_COMMAND_MASTER)
+ conf_data |= PCI_COMMAND_MASTER;
+ if (hi & PCI_COMMAND_MEMORY)
+ conf_data |= PCI_COMMAND_MEMORY;
+ break;
+ case PCI_STATUS:
+ conf_data |= PCI_STATUS_66MHZ;
+ conf_data |= PCI_STATUS_FAST_BACK;
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG)
+ conf_data |= PCI_STATUS_PARITY;
+ conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+ break;
+ case PCI_CLASS_REVISION:
+ _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
+ conf_data = lo & 0x000000ff;
+ conf_data |= (CS5536_OHCI_CLASS_CODE << 8);
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ conf_data =
+ CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+ PCI_NORMAL_LATENCY_TIMER);
+ break;
+ case PCI_BAR0_REG:
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ if (lo & SOFT_BAR_OHCI_FLAG) {
+ conf_data = CS5536_OHCI_RANGE |
+ PCI_BASE_ADDRESS_SPACE_MEMORY;
+ lo &= ~SOFT_BAR_OHCI_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else {
+ _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+ conf_data = lo & 0xffffff00;
+ conf_data &= ~0x0000000f; /* 32bit mem */
+ }
+ break;
+ case PCI_CARDBUS_CIS:
+ conf_data = PCI_CARDBUS_CIS_POINTER;
+ break;
+ case PCI_SUBSYSTEM_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
+ break;
+ case PCI_ROM_ADDRESS:
+ conf_data = PCI_EXPANSION_ROM_BAR;
+ break;
+ case PCI_CAPABILITY_LIST:
+ conf_data = PCI_CAPLIST_USB_POINTER;
+ break;
+ case PCI_INTERRUPT_LINE:
+ conf_data =
+ CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
+ break;
+ case PCI_OHCI_INT_REG:
+ _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+ if ((lo & 0x00000f00) == CS5536_USB_INTR)
+ conf_data = 1;
+ break;
+ default:
+ break;
+ }
+
+ return conf_data;
+}
--- /dev/null
+/*
+ * read/write operation to the PCI config space of CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * the Virtual Support Module(VSM) for virtulizing the PCI
+ * configure space are defined in cs5536_modulename.c respectively,
+ *
+ * after this virtulizing, user can access the PCI configure space
+ * directly as a normal multi-function PCI device which follows
+ * the PCI-2.2 spec.
+ */
+
+#include <linux/types.h>
+#include <cs5536/cs5536_pci.h>
+#include <cs5536/cs5536_vsm.h>
+
+enum {
+ CS5536_FUNC_START = -1,
+ CS5536_ISA_FUNC,
+ reserved_func,
+ CS5536_IDE_FUNC,
+ CS5536_ACC_FUNC,
+ CS5536_OHCI_FUNC,
+ CS5536_EHCI_FUNC,
+ CS5536_FUNC_END,
+};
+
+static const cs5536_pci_vsm_write vsm_conf_write[] = {
+ [CS5536_ISA_FUNC] = pci_isa_write_reg,
+ [reserved_func] = NULL,
+ [CS5536_IDE_FUNC] = pci_ide_write_reg,
+ [CS5536_ACC_FUNC] = pci_acc_write_reg,
+ [CS5536_OHCI_FUNC] = pci_ohci_write_reg,
+ [CS5536_EHCI_FUNC] = pci_ehci_write_reg,
+};
+
+static const cs5536_pci_vsm_read vsm_conf_read[] = {
+ [CS5536_ISA_FUNC] = pci_isa_read_reg,
+ [reserved_func] = NULL,
+ [CS5536_IDE_FUNC] = pci_ide_read_reg,
+ [CS5536_ACC_FUNC] = pci_acc_read_reg,
+ [CS5536_OHCI_FUNC] = pci_ohci_read_reg,
+ [CS5536_EHCI_FUNC] = pci_ehci_read_reg,
+};
+
+/*
+ * write to PCI config space and transfer it to MSR write.
+ */
+void cs5536_pci_conf_write4(int function, int reg, u32 value)
+{
+ if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
+ return;
+ if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0))
+ return;
+
+ if (vsm_conf_write[function] != NULL)
+ vsm_conf_write[function](reg, value);
+}
+
+/*
+ * read PCI config space and transfer it to MSR access.
+ */
+u32 cs5536_pci_conf_read4(int function, int reg)
+{
+ u32 data = 0;
+
+ if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
+ return 0;
+ if ((reg < 0) || ((reg & 0x03) != 0))
+ return 0;
+ if (reg > 0x100)
+ return 0xffffffff;
+
+ if (vsm_conf_read[function] != NULL)
+ data = vsm_conf_read[function](reg);
+
+ return data;
+}
--- /dev/null
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/swiotlb.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <boot_param.h>
+#include <dma-coherence.h>
+
+static void *loongson_dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
+{
+ void *ret;
+
+ if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+ return ret;
+
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
+
+#ifdef CONFIG_ISA
+ if (dev == NULL)
+ gfp |= __GFP_DMA;
+ else
+#endif
+#ifdef CONFIG_ZONE_DMA
+ if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
+ gfp |= __GFP_DMA;
+ else
+#endif
+#ifdef CONFIG_ZONE_DMA32
+ if (dev->coherent_dma_mask < DMA_BIT_MASK(40))
+ gfp |= __GFP_DMA32;
+ else
+#endif
+ ;
+ gfp |= __GFP_NORETRY;
+
+ ret = swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
+ mb();
+ return ret;
+}
+
+static void loongson_dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle, struct dma_attrs *attrs)
+{
+ int order = get_order(size);
+
+ if (dma_release_from_coherent(dev, order, vaddr))
+ return;
+
+ swiotlb_free_coherent(dev, size, vaddr, dma_handle);
+}
+
+static dma_addr_t loongson_dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
+ dir, attrs);
+ mb();
+ return daddr;
+}
+
+static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, NULL);
+ mb();
+
+ return r;
+}
+
+static void loongson_dma_sync_single_for_device(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction dir)
+{
+ swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
+ mb();
+}
+
+static void loongson_dma_sync_sg_for_device(struct device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction dir)
+{
+ swiotlb_sync_sg_for_device(dev, sg, nents, dir);
+ mb();
+}
+
+static int loongson_dma_set_mask(struct device *dev, u64 mask)
+{
+ if (mask > DMA_BIT_MASK(loongson_sysconf.dma_mask_bits)) {
+ *dev->dma_mask = DMA_BIT_MASK(loongson_sysconf.dma_mask_bits);
+ return -EIO;
+ }
+
+ *dev->dma_mask = mask;
+
+ return 0;
+}
+
+dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ long nid;
+#ifdef CONFIG_PHYS48_TO_HT40
+ /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
+ * Loongson-3's 48bit address space and embed it into 40bit */
+ nid = (paddr >> 44) & 0x3;
+ paddr = ((nid << 44) ^ paddr) | (nid << 37);
+#endif
+ return paddr;
+}
+
+phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+ long nid;
+#ifdef CONFIG_PHYS48_TO_HT40
+ /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
+ * Loongson-3's 48bit address space and embed it into 40bit */
+ nid = (daddr >> 37) & 0x3;
+ daddr = ((nid << 37) ^ daddr) | (nid << 44);
+#endif
+ return daddr;
+}
+
+static struct dma_map_ops loongson_dma_map_ops = {
+ .alloc = loongson_dma_alloc_coherent,
+ .free = loongson_dma_free_coherent,
+ .map_page = loongson_dma_map_page,
+ .unmap_page = swiotlb_unmap_page,
+ .map_sg = loongson_dma_map_sg,
+ .unmap_sg = swiotlb_unmap_sg_attrs,
+ .sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+ .sync_single_for_device = loongson_dma_sync_single_for_device,
+ .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+ .sync_sg_for_device = loongson_dma_sync_sg_for_device,
+ .mapping_error = swiotlb_dma_mapping_error,
+ .dma_supported = swiotlb_dma_supported,
+ .set_dma_mask = loongson_dma_set_mask
+};
+
+void __init plat_swiotlb_setup(void)
+{
+ swiotlb_init(1);
+ mips_dma_map_ops = &loongson_dma_map_ops;
+}
--- /dev/null
+/* early printk support
+ *
+ * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (c) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/serial_reg.h>
+
+#include <loongson.h>
+
+#define PORT(base, offset) (u8 *)(base + offset)
+
+static inline unsigned int serial_in(unsigned char *base, int offset)
+{
+ return readb(PORT(base, offset));
+}
+
+static inline void serial_out(unsigned char *base, int offset, int value)
+{
+ writeb(value, PORT(base, offset));
+}
+
+void prom_putchar(char c)
+{
+ int timeout;
+ unsigned char *uart_base;
+
+ uart_base = (unsigned char *)_loongson_uart_base[0];
+ timeout = 1024;
+
+ while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) &&
+ (timeout-- > 0))
+ ;
+
+ serial_out(uart_base, UART_TX, c);
+}
--- /dev/null
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/module.h>
+#include <asm/bootinfo.h>
+#include <loongson.h>
+#include <boot_param.h>
+#include <workarounds.h>
+
+u32 cpu_clock_freq;
+EXPORT_SYMBOL(cpu_clock_freq);
+struct efi_memory_map_loongson *loongson_memmap;
+struct loongson_system_configuration loongson_sysconf;
+
+u64 loongson_chipcfg[MAX_PACKAGES] = {0xffffffffbfc00180};
+u64 loongson_chiptemp[MAX_PACKAGES];
+u64 loongson_freqctrl[MAX_PACKAGES];
+
+unsigned long long smp_group[4];
+
+#define parse_even_earlier(res, option, p) \
+do { \
+ unsigned int tmp __maybe_unused; \
+ \
+ if (strncmp(option, (char *)p, strlen(option)) == 0) \
+ tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \
+} while (0)
+
+void __init prom_init_env(void)
+{
+ /* pmon passes arguments in 32bit pointers */
+ unsigned int processor_id;
+
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
+ int *_prom_envp;
+ long l;
+
+ /* firmware arguments are initialized in head.S */
+ _prom_envp = (int *)fw_arg2;
+
+ l = (long)*_prom_envp;
+ while (l != 0) {
+ parse_even_earlier(cpu_clock_freq, "cpuclock", l);
+ parse_even_earlier(memsize, "memsize", l);
+ parse_even_earlier(highmemsize, "highmemsize", l);
+ _prom_envp++;
+ l = (long)*_prom_envp;
+ }
+ if (memsize == 0)
+ memsize = 256;
+ pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize);
+#else
+ struct boot_params *boot_p;
+ struct loongson_params *loongson_p;
+ struct system_loongson *esys;
+ struct efi_cpuinfo_loongson *ecpu;
+ struct irq_source_routing_table *eirq_source;
+
+ /* firmware arguments are initialized in head.S */
+ boot_p = (struct boot_params *)fw_arg2;
+ loongson_p = &(boot_p->efi.smbios.lp);
+
+ esys = (struct system_loongson *)
+ ((u64)loongson_p + loongson_p->system_offset);
+ ecpu = (struct efi_cpuinfo_loongson *)
+ ((u64)loongson_p + loongson_p->cpu_offset);
+ eirq_source = (struct irq_source_routing_table *)
+ ((u64)loongson_p + loongson_p->irq_offset);
+ loongson_memmap = (struct efi_memory_map_loongson *)
+ ((u64)loongson_p + loongson_p->memory_offset);
+
+ cpu_clock_freq = ecpu->cpu_clock_freq;
+ loongson_sysconf.cputype = ecpu->cputype;
+ if (ecpu->cputype == Loongson_3A) {
+ loongson_sysconf.cores_per_node = 4;
+ loongson_sysconf.cores_per_package = 4;
+ smp_group[0] = 0x900000003ff01000;
+ smp_group[1] = 0x900010003ff01000;
+ smp_group[2] = 0x900020003ff01000;
+ smp_group[3] = 0x900030003ff01000;
+ loongson_chipcfg[0] = 0x900000001fe00180;
+ loongson_chipcfg[1] = 0x900010001fe00180;
+ loongson_chipcfg[2] = 0x900020001fe00180;
+ loongson_chipcfg[3] = 0x900030001fe00180;
+ loongson_chiptemp[0] = 0x900000001fe0019c;
+ loongson_chiptemp[1] = 0x900010001fe0019c;
+ loongson_chiptemp[2] = 0x900020001fe0019c;
+ loongson_chiptemp[3] = 0x900030001fe0019c;
+ loongson_sysconf.ht_control_base = 0x90000EFDFB000000;
+ loongson_sysconf.workarounds = WORKAROUND_CPUFREQ;
+ } else if (ecpu->cputype == Loongson_3B) {
+ loongson_sysconf.cores_per_node = 4; /* One chip has 2 nodes */
+ loongson_sysconf.cores_per_package = 8;
+ smp_group[0] = 0x900000003ff01000;
+ smp_group[1] = 0x900010003ff05000;
+ smp_group[2] = 0x900020003ff09000;
+ smp_group[3] = 0x900030003ff0d000;
+ loongson_chipcfg[0] = 0x900000001fe00180;
+ loongson_chipcfg[1] = 0x900020001fe00180;
+ loongson_chipcfg[2] = 0x900040001fe00180;
+ loongson_chipcfg[3] = 0x900060001fe00180;
+ loongson_chiptemp[0] = 0x900000001fe0019c;
+ loongson_chiptemp[1] = 0x900020001fe0019c;
+ loongson_chiptemp[2] = 0x900040001fe0019c;
+ loongson_chiptemp[3] = 0x900060001fe0019c;
+ loongson_freqctrl[0] = 0x900000001fe001d0;
+ loongson_freqctrl[1] = 0x900020001fe001d0;
+ loongson_freqctrl[2] = 0x900040001fe001d0;
+ loongson_freqctrl[3] = 0x900060001fe001d0;
+ loongson_sysconf.ht_control_base = 0x90001EFDFB000000;
+ loongson_sysconf.workarounds = WORKAROUND_CPUHOTPLUG;
+ } else {
+ loongson_sysconf.cores_per_node = 1;
+ loongson_sysconf.cores_per_package = 1;
+ loongson_chipcfg[0] = 0x900000001fe00180;
+ }
+
+ loongson_sysconf.nr_cpus = ecpu->nr_cpus;
+ loongson_sysconf.boot_cpu_id = ecpu->cpu_startup_core_id;
+ loongson_sysconf.reserved_cpus_mask = ecpu->reserved_cores_mask;
+ if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0)
+ loongson_sysconf.nr_cpus = NR_CPUS;
+ loongson_sysconf.nr_nodes = (loongson_sysconf.nr_cpus +
+ loongson_sysconf.cores_per_node - 1) /
+ loongson_sysconf.cores_per_node;
+
+ loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr;
+ loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr;
+ loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr;
+ loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits;
+ if (loongson_sysconf.dma_mask_bits < 32 ||
+ loongson_sysconf.dma_mask_bits > 64)
+ loongson_sysconf.dma_mask_bits = 32;
+
+ loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm;
+ loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown;
+ loongson_sysconf.suspend_addr = boot_p->reset_system.DoSuspend;
+
+ loongson_sysconf.vgabios_addr = boot_p->efi.smbios.vga_bios;
+ pr_debug("Shutdown Addr: %llx, Restart Addr: %llx, VBIOS Addr: %llx\n",
+ loongson_sysconf.poweroff_addr, loongson_sysconf.restart_addr,
+ loongson_sysconf.vgabios_addr);
+
+ memset(loongson_sysconf.ecname, 0, 32);
+ if (esys->has_ec)
+ memcpy(loongson_sysconf.ecname, esys->ec_name, 32);
+ loongson_sysconf.workarounds |= esys->workarounds;
+
+ loongson_sysconf.nr_uarts = esys->nr_uarts;
+ if (esys->nr_uarts < 1 || esys->nr_uarts > MAX_UARTS)
+ loongson_sysconf.nr_uarts = 1;
+ memcpy(loongson_sysconf.uarts, esys->uarts,
+ sizeof(struct uart_device) * loongson_sysconf.nr_uarts);
+
+ loongson_sysconf.nr_sensors = esys->nr_sensors;
+ if (loongson_sysconf.nr_sensors > MAX_SENSORS)
+ loongson_sysconf.nr_sensors = 0;
+ if (loongson_sysconf.nr_sensors)
+ memcpy(loongson_sysconf.sensors, esys->sensors,
+ sizeof(struct sensor_device) * loongson_sysconf.nr_sensors);
+#endif
+ if (cpu_clock_freq == 0) {
+ processor_id = (¤t_cpu_data)->processor_id;
+ switch (processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON2E:
+ cpu_clock_freq = 533080000;
+ break;
+ case PRID_REV_LOONGSON2F:
+ cpu_clock_freq = 797000000;
+ break;
+ case PRID_REV_LOONGSON3A:
+ cpu_clock_freq = 900000000;
+ break;
+ case PRID_REV_LOONGSON3B_R1:
+ case PRID_REV_LOONGSON3B_R2:
+ cpu_clock_freq = 1000000000;
+ break;
+ default:
+ cpu_clock_freq = 100000000;
+ break;
+ }
+ }
+ pr_info("CpuClock = %u\n", cpu_clock_freq);
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bootmem.h>
+#include <asm/bootinfo.h>
+#include <asm/smp-ops.h>
+
+#include <loongson.h>
+
+/* Loongson CPU address windows config space base address */
+unsigned long __maybe_unused _loongson_addrwincfg_base;
+
+void __init prom_init(void)
+{
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+ _loongson_addrwincfg_base = (unsigned long)
+ ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE);
+#endif
+
+ prom_init_cmdline();
+ prom_init_env();
+
+ /* init base address of io space */
+ set_io_port_base((unsigned long)
+ ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
+
+#ifdef CONFIG_NUMA
+ prom_init_numa_memory();
+#else
+ prom_init_memory();
+#endif
+
+ /*init the uart base address */
+ prom_init_uart_base();
+ register_smp_ops(&loongson3_smp_ops);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
--- /dev/null
+/*
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <loongson.h>
+/*
+ * the first level int-handler will jump here if it is a bonito irq
+ */
+void bonito_irqdispatch(void)
+{
+ u32 int_status;
+ int i;
+
+ /* workaround the IO dma problem: let cpu looping to allow DMA finish */
+ int_status = LOONGSON_INTISR;
+ while (int_status & (1 << 10)) {
+ udelay(1);
+ int_status = LOONGSON_INTISR;
+ }
+
+ /* Get pending sources, masked by current enables */
+ int_status = LOONGSON_INTISR & LOONGSON_INTEN;
+
+ if (int_status) {
+ i = __ffs(int_status);
+ do_IRQ(LOONGSON_IRQ_BASE + i);
+ }
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending;
+
+ pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+ /* machine-specific plat_irq_dispatch */
+ mach_irq_dispatch(pending);
+}
+
+void __init arch_init_irq(void)
+{
+ /*
+ * Clear all of the interrupts while we change the able around a bit.
+ * int-handler is not on bootstrap
+ */
+ clear_c0_status(ST0_IM | ST0_BEV);
+
+ /* no steer */
+ LOONGSON_INTSTEER = 0;
+
+ /*
+ * Mask out all interrupt by writing "1" to all bit position in
+ * the interrupt reset reg.
+ */
+ LOONGSON_INTENCLR = ~0;
+
+ /* machine specific irq init */
+ mach_init_irq();
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/errno.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+/* please ensure the length of the machtype string is less than 50 */
+#define MACHTYPE_LEN 50
+
+static const char *system_types[] = {
+ [MACH_LOONGSON_UNKNOWN] = "unknown loongson machine",
+ [MACH_LEMOTE_FL2E] = "lemote-fuloong-2e-box",
+ [MACH_LEMOTE_FL2F] = "lemote-fuloong-2f-box",
+ [MACH_LEMOTE_ML2F7] = "lemote-mengloong-2f-7inches",
+ [MACH_LEMOTE_YL2F89] = "lemote-yeeloong-2f-8.9inches",
+ [MACH_DEXXON_GDIUM2F10] = "dexxon-gdium-2f",
+ [MACH_LEMOTE_NAS] = "lemote-nas-2f",
+ [MACH_LEMOTE_LL2F] = "lemote-lynloong-2f",
+ [MACH_LOONGSON_GENERIC] = "generic-loongson-machine",
+ [MACH_LOONGSON_END] = NULL,
+};
+
+const char *get_system_type(void)
+{
+ return system_types[mips_machtype];
+}
+
+void __weak __init mach_prom_init_machtype(void)
+{
+}
+
+void __init prom_init_machtype(void)
+{
+ char *p, str[MACHTYPE_LEN + 1];
+ int machtype = MACH_LEMOTE_FL2E;
+
+ mips_machtype = LOONGSON_MACHTYPE;
+
+ p = strstr(arcs_cmdline, "machtype=");
+ if (!p) {
+ mach_prom_init_machtype();
+ return;
+ }
+ p += strlen("machtype=");
+ strncpy(str, p, MACHTYPE_LEN);
+ str[MACHTYPE_LEN] = '\0';
+ p = strstr(str, " ");
+ if (p)
+ *p = '\0';
+
+ for (; system_types[machtype]; machtype++)
+ if (strstr(system_types[machtype], str)) {
+ mips_machtype = machtype;
+ break;
+ }
+}
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/fs.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <boot_param.h>
+#include <mem.h>
+#include <pci.h>
+
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
+
+u32 memsize, highmemsize;
+
+void __init prom_init_memory(void)
+{
+ add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+
+ add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
+ 20), BOOT_MEM_RESERVED);
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+ {
+ int bit;
+
+ bit = fls(memsize + highmemsize);
+ if (bit != ffs(memsize + highmemsize))
+ bit += 20;
+ else
+ bit = bit + 20 - 1;
+
+ /* set cpu window3 to map CPU to DDR: 2G -> 2G */
+ LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul,
+ 0x80000000ul, (1 << bit));
+ mmiowb();
+ }
+#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
+
+#ifdef CONFIG_64BIT
+ if (highmemsize > 0)
+ add_memory_region(LOONGSON_HIGHMEM_START,
+ highmemsize << 20, BOOT_MEM_RAM);
+
+ add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START -
+ LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED);
+
+#endif /* !CONFIG_64BIT */
+}
+
+#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */
+
+void __init prom_init_memory(void)
+{
+ int i;
+ u32 node_id;
+ u32 mem_type;
+
+ /* parse memory information */
+ for (i = 0; i < loongson_memmap->nr_map; i++) {
+ node_id = loongson_memmap->map[i].node_id;
+ mem_type = loongson_memmap->map[i].mem_type;
+
+ if (node_id == 0) {
+ switch (mem_type) {
+ case SYSTEM_RAM_LOW:
+ add_memory_region(loongson_memmap->map[i].mem_start,
+ (u64)loongson_memmap->map[i].mem_size << 20,
+ BOOT_MEM_RAM);
+ break;
+ case SYSTEM_RAM_HIGH:
+ add_memory_region(loongson_memmap->map[i].mem_start,
+ (u64)loongson_memmap->map[i].mem_size << 20,
+ BOOT_MEM_RAM);
+ break;
+ case MEM_RESERVED:
+ add_memory_region(loongson_memmap->map[i].mem_start,
+ (u64)loongson_memmap->map[i].mem_size << 20,
+ BOOT_MEM_RESERVED);
+ break;
+ }
+ }
+ }
+}
+
+#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */
+
+/* override of arch/mips/mm/cache.c: __uncached_access */
+int __uncached_access(struct file *file, unsigned long addr)
+{
+ if (file->f_flags & O_DSYNC)
+ return 1;
+
+ return addr >= __pa(high_memory) ||
+ ((addr >= LOONGSON_MMIO_MEM_START) &&
+ (addr < LOONGSON_MMIO_MEM_END));
+}
+
+#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED
+
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <asm/current.h>
+
+static unsigned long uca_start, uca_end;
+
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t vma_prot)
+{
+ unsigned long offset = pfn << PAGE_SHIFT;
+ unsigned long end = offset + size;
+
+ if (__uncached_access(file, offset)) {
+ if (uca_start && (offset >= uca_start) &&
+ (end <= uca_end))
+ return __pgprot((pgprot_val(vma_prot) &
+ ~_CACHE_MASK) |
+ _CACHE_UNCACHED_ACCELERATED);
+ else
+ return pgprot_noncached(vma_prot);
+ }
+ return vma_prot;
+}
+
+static int __init find_vga_mem_init(void)
+{
+ struct pci_dev *dev = 0;
+ struct resource *r;
+ int idx;
+
+ if (uca_start)
+ return 0;
+
+ for_each_pci_dev(dev) {
+ if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
+ for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
+ r = &dev->resource[idx];
+ if (!r->start && r->end)
+ continue;
+ if (r->flags & IORESOURCE_IO)
+ continue;
+ if (r->flags & IORESOURCE_MEM) {
+ uca_start = r->start;
+ uca_end = r->end;
+ return 0;
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+late_initcall(find_vga_mem_init);
+#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */
--- /dev/null
+/*
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/pci.h>
+
+#include <pci.h>
+#include <loongson.h>
+#include <boot_param.h>
+
+static struct resource loongson_pci_mem_resource = {
+ .name = "pci memory space",
+ .start = LOONGSON_PCI_MEM_START,
+ .end = LOONGSON_PCI_MEM_END,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource loongson_pci_io_resource = {
+ .name = "pci io space",
+ .start = LOONGSON_PCI_IO_START,
+ .end = IO_SPACE_LIMIT,
+ .flags = IORESOURCE_IO,
+};
+
+static struct pci_controller loongson_pci_controller = {
+ .pci_ops = &loongson_pci_ops,
+ .io_resource = &loongson_pci_io_resource,
+ .mem_resource = &loongson_pci_mem_resource,
+ .mem_offset = 0x00000000UL,
+ .io_offset = 0x00000000UL,
+};
+
+static void __init setup_pcimap(void)
+{
+ /*
+ * local to PCI mapping for CPU accessing PCI space
+ * CPU address space [256M,448M] is window for accessing pci space
+ * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M]
+ *
+ * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
+ * [<2G] [384M,448M] [320M,384M] [0M,64M]
+ */
+ LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 |
+ LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) |
+ LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) |
+ LOONGSON_PCIMAP_WIN(0, 0);
+
+ /*
+ * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
+ */
+ LOONGSON_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */
+ /* size: 256M, burst transmission, pre-fetch enable, 64bit */
+ LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
+ LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
+ LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+ LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul;
+ LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+ LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul;
+
+ /* avoid deadlock of PCI reading/writing lock operation */
+ LOONGSON_PCI_ISR4C = 0xd2000001ul;
+
+ /* can not change gnt to break pci transfer when device's gnt not
+ deassert for some broken device */
+ LOONGSON_PXARB_CFG = 0x00fe0105ul;
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+ /*
+ * set cpu addr window2 to map CPU address space to PCI address space
+ */
+ LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC,
+ LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE);
+#endif
+}
+
+extern int sbx00_acpi_init(void);
+
+static int __init pcibios_init(void)
+{
+ setup_pcimap();
+
+ loongson_pci_controller.io_map_base = mips_io_port_base;
+#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE
+ loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr;
+ loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr;
+#endif
+ register_pci_controller(&loongson_pci_controller);
+
+#ifdef CONFIG_CPU_LOONGSON3
+ sbx00_acpi_init();
+#endif
+
+ return 0;
+}
+
+arch_initcall(pcibios_init);
--- /dev/null
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/smp.h>
+#include <linux/platform_device.h>
+
+static struct platform_device loongson2_cpufreq_device = {
+ .name = "loongson2_cpufreq",
+ .id = -1,
+};
+
+static int __init loongson2_cpufreq_init(void)
+{
+ struct cpuinfo_mips *c = ¤t_cpu_data;
+
+ /* Only 2F revision and it's successors support CPUFreq */
+ if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F)
+ return platform_device_register(&loongson2_cpufreq_device);
+
+ return -ENODEV;
+}
+
+arch_initcall(loongson2_cpufreq_init);
--- /dev/null
+/*
+ * loongson-specific suspend support
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+#include <loongson.h>
+
+static unsigned int __maybe_unused cached_master_mask; /* i8259A */
+static unsigned int __maybe_unused cached_slave_mask;
+static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */
+
+void arch_suspend_disable_irqs(void)
+{
+ /* disable all mips events */
+ local_irq_disable();
+
+#ifdef CONFIG_I8259
+ /* disable all events of i8259A */
+ cached_slave_mask = inb(PIC_SLAVE_IMR);
+ cached_master_mask = inb(PIC_MASTER_IMR);
+
+ outb(0xff, PIC_SLAVE_IMR);
+ inb(PIC_SLAVE_IMR);
+ outb(0xff, PIC_MASTER_IMR);
+ inb(PIC_MASTER_IMR);
+#endif
+ /* disable all events of bonito */
+ cached_bonito_irq_mask = LOONGSON_INTEN;
+ LOONGSON_INTENCLR = 0xffff;
+ (void)LOONGSON_INTENCLR;
+}
+
+void arch_suspend_enable_irqs(void)
+{
+ /* enable all mips events */
+ local_irq_enable();
+#ifdef CONFIG_I8259
+ /* only enable the cached events of i8259A */
+ outb(cached_slave_mask, PIC_SLAVE_IMR);
+ outb(cached_master_mask, PIC_MASTER_IMR);
+#endif
+ /* enable all cached events of bonito */
+ LOONGSON_INTENSET = cached_bonito_irq_mask;
+ (void)LOONGSON_INTENSET;
+}
+
+/*
+ * Setup the board-specific events for waking up loongson from wait mode
+ */
+void __weak setup_wakeup_events(void)
+{
+}
+
+/*
+ * Check wakeup events
+ */
+int __weak wakeup_loongson(void)
+{
+ return 1;
+}
+
+/*
+ * If the events are really what we want to wakeup the CPU, wake it up
+ * otherwise put the CPU asleep again.
+ */
+static void wait_for_wakeup_events(void)
+{
+ while (!wakeup_loongson())
+ LOONGSON_CHIPCFG(0) &= ~0x7;
+}
+
+/*
+ * Stop all perf counters
+ *
+ * $24 is the control register of Loongson perf counter
+ */
+static inline void stop_perf_counters(void)
+{
+ __write_64bit_c0_register($24, 0, 0);
+}
+
+
+static void loongson_suspend_enter(void)
+{
+ static unsigned int cached_cpu_freq;
+
+ /* setup wakeup events via enabling the IRQs */
+ setup_wakeup_events();
+
+ stop_perf_counters();
+
+ cached_cpu_freq = LOONGSON_CHIPCFG(0);
+
+ /* Put CPU into wait mode */
+ LOONGSON_CHIPCFG(0) &= ~0x7;
+
+ /* wait for the given events to wakeup cpu from wait mode */
+ wait_for_wakeup_events();
+
+ LOONGSON_CHIPCFG(0) = cached_cpu_freq;
+ mmiowb();
+}
+
+void __weak mach_suspend(void)
+{
+}
+
+void __weak mach_resume(void)
+{
+}
+
+static int loongson_pm_enter(suspend_state_t state)
+{
+ mach_suspend();
+
+ /* processor specific suspend */
+ loongson_suspend_enter();
+
+ mach_resume();
+
+ return 0;
+}
+
+static int loongson_pm_valid_state(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_ON:
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+static const struct platform_suspend_ops loongson_pm_ops = {
+ .valid = loongson_pm_valid_state,
+ .enter = loongson_pm_enter,
+};
+
+static int __init loongson_pm_init(void)
+{
+ suspend_set_ops(&loongson_pm_ops);
+
+ return 0;
+}
+arch_initcall(loongson_pm_init);
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Zhangjin Wu, wuzhangjin@gmail.com
+ */
+#include <linux/init.h>
+#include <linux/pm.h>
+
+#include <asm/idle.h>
+#include <asm/reboot.h>
+
+#include <loongson.h>
+#include <boot_param.h>
+
+static inline void loongson_reboot(void)
+{
+#ifndef CONFIG_CPU_JUMP_WORKAROUNDS
+ ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+#else
+ void (*func)(void);
+
+ func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4);
+
+ __asm__ __volatile__(
+ " .set noat \n"
+ " jr %[func] \n"
+ " .set at \n"
+ : /* No outputs */
+ : [func] "r" (func));
+#endif
+}
+
+static void loongson_restart(char *command)
+{
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
+ /* do preparation for reboot */
+ mach_prepare_reboot();
+
+ /* reboot via jumping to boot base address */
+ loongson_reboot();
+#else
+ void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
+
+ fw_restart();
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
+#endif
+}
+
+static void loongson_poweroff(void)
+{
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
+ mach_prepare_shutdown();
+ unreachable();
+#else
+ void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
+
+ fw_poweroff();
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
+#endif
+}
+
+static void loongson_halt(void)
+{
+ pr_notice("\n\n** You can safely turn off the power now **\n\n");
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
+}
+
+static int __init mips_reboot_setup(void)
+{
+ _machine_restart = loongson_restart;
+ _machine_halt = loongson_halt;
+ pm_power_off = loongson_poweroff;
+
+ return 0;
+}
+
+arch_initcall(mips_reboot_setup);
--- /dev/null
+/*
+ * Lemote Fuloong platform support
+ *
+ * Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mc146818rtc.h>
+
+static struct resource loongson_rtc_resources[] = {
+ {
+ .start = RTC_PORT(0),
+ .end = RTC_PORT(1),
+ .flags = IORESOURCE_IO,
+ }, {
+ .start = RTC_IRQ,
+ .end = RTC_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device loongson_rtc_device = {
+ .name = "rtc_cmos",
+ .id = -1,
+ .resource = loongson_rtc_resources,
+ .num_resources = ARRAY_SIZE(loongson_rtc_resources),
+};
+
+
+static int __init loongson_rtc_platform_init(void)
+{
+ platform_device_register(&loongson_rtc_device);
+ return 0;
+}
+
+device_initcall(loongson_rtc_platform_init);
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Yan hua (yanhua@lemote.com)
+ * Author: Wu Zhangjin (wuzhangjin@gmail.com)
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+#define PORT(int, clk) \
+{ \
+ .irq = int, \
+ .uartclk = clk, \
+ .iotype = UPIO_PORT, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
+ .regshift = 0, \
+}
+
+#define PORT_M(int, clk) \
+{ \
+ .irq = MIPS_CPU_IRQ_BASE + (int), \
+ .uartclk = clk, \
+ .iotype = UPIO_MEM, \
+ .membase = (void __iomem *)NULL, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
+ .regshift = 0, \
+}
+
+static struct plat_serial8250_port uart8250_data[][MAX_UARTS + 1] = {
+ [MACH_LOONGSON_UNKNOWN] = {},
+ [MACH_LEMOTE_FL2E] = {PORT(4, 1843200), {} },
+ [MACH_LEMOTE_FL2F] = {PORT(3, 1843200), {} },
+ [MACH_LEMOTE_ML2F7] = {PORT_M(3, 3686400), {} },
+ [MACH_LEMOTE_YL2F89] = {PORT_M(3, 3686400), {} },
+ [MACH_DEXXON_GDIUM2F10] = {PORT_M(3, 3686400), {} },
+ [MACH_LEMOTE_NAS] = {PORT_M(3, 3686400), {} },
+ [MACH_LEMOTE_LL2F] = {PORT(3, 1843200), {} },
+ [MACH_LOONGSON_GENERIC] = {PORT_M(2, 25000000), {} },
+ [MACH_LOONGSON_END] = {},
+};
+
+static struct platform_device uart8250_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+};
+
+static int __init serial_init(void)
+{
+ int i;
+ unsigned char iotype;
+
+ iotype = uart8250_data[mips_machtype][0].iotype;
+
+ if (UPIO_MEM == iotype) {
+ uart8250_data[mips_machtype][0].mapbase =
+ loongson_uart_base[0];
+ uart8250_data[mips_machtype][0].membase =
+ (void __iomem *)_loongson_uart_base[0];
+ }
+ else if (UPIO_PORT == iotype)
+ uart8250_data[mips_machtype][0].iobase =
+ loongson_uart_base[0] - LOONGSON_PCIIO_BASE;
+
+ if (loongson_sysconf.uarts[0].uartclk)
+ uart8250_data[mips_machtype][0].uartclk =
+ loongson_sysconf.uarts[0].uartclk;
+
+ for (i = 1; i < loongson_sysconf.nr_uarts; i++) {
+ iotype = loongson_sysconf.uarts[i].iotype;
+ uart8250_data[mips_machtype][i].iotype = iotype;
+ loongson_uart_base[i] = loongson_sysconf.uarts[i].uart_base;
+
+ if (UPIO_MEM == iotype) {
+ uart8250_data[mips_machtype][i].irq =
+ MIPS_CPU_IRQ_BASE + loongson_sysconf.uarts[i].int_offset;
+ uart8250_data[mips_machtype][i].mapbase =
+ loongson_uart_base[i];
+ uart8250_data[mips_machtype][i].membase =
+ ioremap_nocache(loongson_uart_base[i], 8);
+ } else if (UPIO_PORT == iotype) {
+ uart8250_data[mips_machtype][i].irq =
+ loongson_sysconf.uarts[i].int_offset;
+ uart8250_data[mips_machtype][i].iobase =
+ loongson_uart_base[i] - LOONGSON_PCIIO_BASE;
+ }
+
+ uart8250_data[mips_machtype][i].uartclk =
+ loongson_sysconf.uarts[i].uartclk;
+ uart8250_data[mips_machtype][i].flags =
+ UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ }
+
+ memset(&uart8250_data[mips_machtype][loongson_sysconf.nr_uarts],
+ 0, sizeof(struct plat_serial8250_port));
+ uart8250_device.dev.platform_data = uart8250_data[mips_machtype];
+
+ return platform_device_register(&uart8250_device);
+}
+
+device_initcall(serial_init);
--- /dev/null
+/*
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/module.h>
+
+#include <asm/wbflush.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+#ifdef CONFIG_VT
+#include <linux/console.h>
+#include <linux/screen_info.h>
+#endif
+
+static void wbflush_loongson(void)
+{
+ asm(".set\tpush\n\t"
+ ".set\tnoreorder\n\t"
+ ".set mips3\n\t"
+ "sync\n\t"
+ "nop\n\t"
+ ".set\tpop\n\t"
+ ".set mips0\n\t");
+}
+
+void (*__wbflush)(void) = wbflush_loongson;
+EXPORT_SYMBOL(__wbflush);
+
+void __init plat_mem_setup(void)
+{
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+ conswitchp = &vga_con;
+
+ screen_info = (struct screen_info) {
+ .orig_x = 0,
+ .orig_y = 25,
+ .orig_video_cols = 80,
+ .orig_video_lines = 25,
+ .orig_video_isVGA = VIDEO_TYPE_VGAC,
+ .orig_video_points = 16,
+ };
+#elif defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+#endif
+}
--- /dev/null
+/*
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <asm/mc146818-time.h>
+#include <asm/time.h>
+#include <asm/hpet.h>
+
+#include <loongson.h>
+#include <cs5536/cs5536_mfgpt.h>
+
+void __init plat_time_init(void)
+{
+ /* setup mips r4k timer */
+ mips_hpt_frequency = cpu_clock_freq / 2;
+
+#ifdef CONFIG_RS780_HPET
+ setup_hpet_timer();
+#else
+ setup_mfgpt0_timer();
+#endif
+}
+
+void read_persistent_clock(struct timespec *ts)
+{
+ ts->tv_sec = mc146818_get_cmos_time();
+ ts->tv_nsec = 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+/* raw */
+unsigned long loongson_uart_base[MAX_UARTS] = {};
+/* ioremapped */
+unsigned long _loongson_uart_base[MAX_UARTS] = {};
+
+EXPORT_SYMBOL(loongson_uart_base);
+EXPORT_SYMBOL(_loongson_uart_base);
+
+void prom_init_loongson_uart_base(void)
+{
+ switch (mips_machtype) {
+ case MACH_LOONGSON_GENERIC:
+ /* The CPU provided serial port (CPU) */
+ loongson_uart_base[0] = LOONGSON_REG_BASE + 0x1e0;
+ break;
+ case MACH_LEMOTE_FL2E:
+ loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x3f8;
+ break;
+ case MACH_LEMOTE_FL2F:
+ case MACH_LEMOTE_LL2F:
+ loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x2f8;
+ break;
+ case MACH_LEMOTE_ML2F7:
+ case MACH_LEMOTE_YL2F89:
+ case MACH_DEXXON_GDIUM2F10:
+ case MACH_LEMOTE_NAS:
+ default:
+ /* The CPU provided serial port (LPC) */
+ loongson_uart_base[0] = LOONGSON_LIO1_BASE + 0x3f8;
+ break;
+ }
+
+ _loongson_uart_base[0] =
+ (unsigned long)ioremap_nocache(loongson_uart_base[0], 8);
+}
--- /dev/null
+#
+# Makefile for Lemote Fuloong2e mini-PC board.
+#
+
+obj-y += irq.o reset.o
--- /dev/null
+/*
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/interrupt.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+
+#include <loongson.h>
+
+static void i8259_irqdispatch(void)
+{
+ int irq;
+
+ irq = i8259_irq();
+ if (irq >= 0)
+ do_IRQ(irq);
+ else
+ spurious_interrupt();
+}
+
+asmlinkage void mach_irq_dispatch(unsigned int pending)
+{
+ if (pending & CAUSEF_IP7)
+ do_IRQ(MIPS_CPU_IRQ_BASE + 7);
+ else if (pending & CAUSEF_IP6) /* perf counter loverflow */
+ do_perfcnt_IRQ();
+ else if (pending & CAUSEF_IP5)
+ i8259_irqdispatch();
+ else if (pending & CAUSEF_IP2)
+ bonito_irqdispatch();
+ else
+ spurious_interrupt();
+}
+
+static struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .name = "cascade",
+ .flags = IRQF_NO_THREAD,
+};
+
+void __init mach_init_irq(void)
+{
+ /* init all controller
+ * 0-15 ------> i8259 interrupt
+ * 16-23 ------> mips cpu interrupt
+ * 32-63 ------> bonito irq
+ */
+
+ /* most bonito irq should be level triggered */
+ LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR |
+ LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES;
+
+ /* Sets the first-level interrupt dispatcher. */
+ mips_cpu_irq_init();
+ init_i8259_irqs();
+ bonito_irq_init();
+
+ /* bonito irq at IP2 */
+ setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
+ /* 8259 irq at IP5 */
+ setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
+}
--- /dev/null
+/* Board-specific reboot/shutdown routines
+ * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <loongson.h>
+
+void mach_prepare_reboot(void)
+{
+ LOONGSON_GENCFG &= ~(1 << 2);
+ LOONGSON_GENCFG |= (1 << 2);
+}
+
+void mach_prepare_shutdown(void)
+{
+}
--- /dev/null
+#
+# Makefile for lemote loongson2f family machines
+#
+
+obj-y += clock.o machtype.o irq.o reset.o ec_kb3310b.o
+
+#
+# Suspend Support
+#
+
+obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
--- /dev/null
+/*
+ * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology
+ * Author: Yanhua, yanh@lemote.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+
+#include <asm/clock.h>
+#include <asm/mach-loongson/loongson.h>
+
+static LIST_HEAD(clock_list);
+static DEFINE_SPINLOCK(clock_lock);
+static DEFINE_MUTEX(clock_list_sem);
+
+/* Minimum CLK support */
+enum {
+ DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT,
+ DC_87PT, DC_DISABLE, DC_RESV
+};
+
+struct cpufreq_frequency_table loongson2_clockmod_table[] = {
+ {0, DC_RESV, CPUFREQ_ENTRY_INVALID},
+ {0, DC_ZERO, CPUFREQ_ENTRY_INVALID},
+ {0, DC_25PT, 0},
+ {0, DC_37PT, 0},
+ {0, DC_50PT, 0},
+ {0, DC_62PT, 0},
+ {0, DC_75PT, 0},
+ {0, DC_87PT, 0},
+ {0, DC_DISABLE, 0},
+ {0, DC_RESV, CPUFREQ_TABLE_END},
+};
+EXPORT_SYMBOL_GPL(loongson2_clockmod_table);
+
+static struct clk cpu_clk = {
+ .name = "cpu_clk",
+ .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
+ .rate = 800000000,
+};
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ return &cpu_clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+static void propagate_rate(struct clk *clk)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &clock_list, node) {
+ if (likely(clkp->parent != clk))
+ continue;
+ if (likely(clkp->ops && clkp->ops->recalc))
+ clkp->ops->recalc(clkp);
+ if (unlikely(clkp->flags & CLK_RATE_PROPAGATES))
+ propagate_rate(clkp);
+ }
+}
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return (unsigned long)clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int rate_khz = rate / 1000;
+ struct cpufreq_frequency_table *pos;
+ int ret = 0;
+ int regval;
+
+ if (likely(clk->ops && clk->ops->set_rate)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&clock_lock, flags);
+ ret = clk->ops->set_rate(clk, rate, 0);
+ spin_unlock_irqrestore(&clock_lock, flags);
+ }
+
+ if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
+ propagate_rate(clk);
+
+ cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table)
+ if (rate_khz == pos->frequency)
+ break;
+ if (rate_khz != pos->frequency)
+ return -ENOTSUPP;
+
+ clk->rate = rate;
+
+ regval = LOONGSON_CHIPCFG(0);
+ regval = (regval & ~0x7) | (pos->driver_data - 1);
+ LOONGSON_CHIPCFG(0) = regval;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (likely(clk->ops && clk->ops->round_rate)) {
+ unsigned long flags, rounded;
+
+ spin_lock_irqsave(&clock_lock, flags);
+ rounded = clk->ops->round_rate(clk, rate);
+ spin_unlock_irqrestore(&clock_lock, flags);
+
+ return rounded;
+ }
+
+ return rate;
+}
+EXPORT_SYMBOL_GPL(clk_round_rate);
--- /dev/null
+/*
+ * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook
+ *
+ * Copyright (C) 2008 Lemote Inc.
+ * Author: liujl <liujl@lemote.com>, 2008-04-20
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+
+#include "ec_kb3310b.h"
+
+static DEFINE_SPINLOCK(index_access_lock);
+static DEFINE_SPINLOCK(port_access_lock);
+
+unsigned char ec_read(unsigned short addr)
+{
+ unsigned char value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&index_access_lock, flags);
+ outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
+ outb((addr & 0x00ff), EC_IO_PORT_LOW);
+ value = inb(EC_IO_PORT_DATA);
+ spin_unlock_irqrestore(&index_access_lock, flags);
+
+ return value;
+}
+EXPORT_SYMBOL_GPL(ec_read);
+
+void ec_write(unsigned short addr, unsigned char val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&index_access_lock, flags);
+ outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
+ outb((addr & 0x00ff), EC_IO_PORT_LOW);
+ outb(val, EC_IO_PORT_DATA);
+ /* flush the write action */
+ inb(EC_IO_PORT_DATA);
+ spin_unlock_irqrestore(&index_access_lock, flags);
+}
+EXPORT_SYMBOL_GPL(ec_write);
+
+/*
+ * This function is used for EC command writes and corresponding status queries.
+ */
+int ec_query_seq(unsigned char cmd)
+{
+ int timeout;
+ unsigned char status;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&port_access_lock, flags);
+
+ /* make chip goto reset mode */
+ udelay(EC_REG_DELAY);
+ outb(cmd, EC_CMD_PORT);
+ udelay(EC_REG_DELAY);
+
+ /* check if the command is received by ec */
+ timeout = EC_CMD_TIMEOUT;
+ status = inb(EC_STS_PORT);
+ while (timeout-- && (status & (1 << 1))) {
+ status = inb(EC_STS_PORT);
+ udelay(EC_REG_DELAY);
+ }
+
+ spin_unlock_irqrestore(&port_access_lock, flags);
+
+ if (timeout <= 0) {
+ printk(KERN_ERR "%s: deadable error : timeout...\n", __func__);
+ ret = -EINVAL;
+ } else
+ printk(KERN_INFO
+ "(%x/%d)ec issued command %d status : 0x%x\n",
+ timeout, EC_CMD_TIMEOUT - timeout, cmd, status);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ec_query_seq);
+
+/*
+ * Send query command to EC to get the proper event number
+ */
+int ec_query_event_num(void)
+{
+ return ec_query_seq(CMD_GET_EVENT_NUM);
+}
+EXPORT_SYMBOL(ec_query_event_num);
+
+/*
+ * Get event number from EC
+ *
+ * NOTE: This routine must follow the query_event_num function in the
+ * interrupt.
+ */
+int ec_get_event_num(void)
+{
+ int timeout = 100;
+ unsigned char value;
+ unsigned char status;
+
+ udelay(EC_REG_DELAY);
+ status = inb(EC_STS_PORT);
+ udelay(EC_REG_DELAY);
+ while (timeout-- && !(status & (1 << 0))) {
+ status = inb(EC_STS_PORT);
+ udelay(EC_REG_DELAY);
+ }
+ if (timeout <= 0) {
+ pr_info("%s: get event number timeout.\n", __func__);
+
+ return -EINVAL;
+ }
+ value = inb(EC_DAT_PORT);
+ udelay(EC_REG_DELAY);
+
+ return value;
+}
+EXPORT_SYMBOL(ec_get_event_num);
--- /dev/null
+/*
+ * KB3310B Embedded Controller
+ *
+ * Copyright (C) 2008 Lemote Inc.
+ * Author: liujl <liujl@lemote.com>, 2008-03-14
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _EC_KB3310B_H
+#define _EC_KB3310B_H
+
+extern unsigned char ec_read(unsigned short addr);
+extern void ec_write(unsigned short addr, unsigned char val);
+extern int ec_query_seq(unsigned char cmd);
+extern int ec_query_event_num(void);
+extern int ec_get_event_num(void);
+
+typedef int (*sci_handler) (int status);
+extern sci_handler yeeloong_report_lid_status;
+
+#define SCI_IRQ_NUM 0x0A
+
+/*
+ * The following registers are determined by the EC index configuration.
+ * 1, fill the PORT_HIGH as EC register high part.
+ * 2, fill the PORT_LOW as EC register low part.
+ * 3, fill the PORT_DATA as EC register write data or get the data from it.
+ */
+#define EC_IO_PORT_HIGH 0x0381
+#define EC_IO_PORT_LOW 0x0382
+#define EC_IO_PORT_DATA 0x0383
+
+/*
+ * EC delay time is 500us for register and status access
+ */
+#define EC_REG_DELAY 500 /* unit : us */
+#define EC_CMD_TIMEOUT 0x1000
+
+/*
+ * EC access port for SCI communication
+ */
+#define EC_CMD_PORT 0x66
+#define EC_STS_PORT 0x66
+#define EC_DAT_PORT 0x62
+#define CMD_INIT_IDLE_MODE 0xdd
+#define CMD_EXIT_IDLE_MODE 0xdf
+#define CMD_INIT_RESET_MODE 0xd8
+#define CMD_REBOOT_SYSTEM 0x8c
+#define CMD_GET_EVENT_NUM 0x84
+#define CMD_PROGRAM_PIECE 0xda
+
+/* temperature & fan registers */
+#define REG_TEMPERATURE_VALUE 0xF458
+#define REG_FAN_AUTO_MAN_SWITCH 0xF459
+#define BIT_FAN_AUTO 0
+#define BIT_FAN_MANUAL 1
+#define REG_FAN_CONTROL 0xF4D2
+#define BIT_FAN_CONTROL_ON (1 << 0)
+#define BIT_FAN_CONTROL_OFF (0 << 0)
+#define REG_FAN_STATUS 0xF4DA
+#define BIT_FAN_STATUS_ON (1 << 0)
+#define BIT_FAN_STATUS_OFF (0 << 0)
+#define REG_FAN_SPEED_HIGH 0xFE22
+#define REG_FAN_SPEED_LOW 0xFE23
+#define REG_FAN_SPEED_LEVEL 0xF4CC
+/* fan speed divider */
+#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/
+
+/* battery registers */
+#define REG_BAT_DESIGN_CAP_HIGH 0xF77D
+#define REG_BAT_DESIGN_CAP_LOW 0xF77E
+#define REG_BAT_FULLCHG_CAP_HIGH 0xF780
+#define REG_BAT_FULLCHG_CAP_LOW 0xF781
+#define REG_BAT_DESIGN_VOL_HIGH 0xF782
+#define REG_BAT_DESIGN_VOL_LOW 0xF783
+#define REG_BAT_CURRENT_HIGH 0xF784
+#define REG_BAT_CURRENT_LOW 0xF785
+#define REG_BAT_VOLTAGE_HIGH 0xF786
+#define REG_BAT_VOLTAGE_LOW 0xF787
+#define REG_BAT_TEMPERATURE_HIGH 0xF788
+#define REG_BAT_TEMPERATURE_LOW 0xF789
+#define REG_BAT_RELATIVE_CAP_HIGH 0xF492
+#define REG_BAT_RELATIVE_CAP_LOW 0xF493
+#define REG_BAT_VENDOR 0xF4C4
+#define FLAG_BAT_VENDOR_SANYO 0x01
+#define FLAG_BAT_VENDOR_SIMPLO 0x02
+#define REG_BAT_CELL_COUNT 0xF4C6
+#define FLAG_BAT_CELL_3S1P 0x03
+#define FLAG_BAT_CELL_3S2P 0x06
+#define REG_BAT_CHARGE 0xF4A2
+#define FLAG_BAT_CHARGE_DISCHARGE 0x01
+#define FLAG_BAT_CHARGE_CHARGE 0x02
+#define FLAG_BAT_CHARGE_ACPOWER 0x00
+#define REG_BAT_STATUS 0xF4B0
+#define BIT_BAT_STATUS_LOW (1 << 5)
+#define BIT_BAT_STATUS_DESTROY (1 << 2)
+#define BIT_BAT_STATUS_FULL (1 << 1)
+#define BIT_BAT_STATUS_IN (1 << 0)
+#define REG_BAT_CHARGE_STATUS 0xF4B1
+#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2)
+#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1)
+#define REG_BAT_STATE 0xF482
+#define BIT_BAT_STATE_CHARGING (1 << 1)
+#define BIT_BAT_STATE_DISCHARGING (1 << 0)
+#define REG_BAT_POWER 0xF440
+#define BIT_BAT_POWER_S3 (1 << 2)
+#define BIT_BAT_POWER_ON (1 << 1)
+#define BIT_BAT_POWER_ACIN (1 << 0)
+
+/* other registers */
+/* Audio: rd/wr */
+#define REG_AUDIO_VOLUME 0xF46C
+#define REG_AUDIO_MUTE 0xF4E7
+#define REG_AUDIO_BEEP 0xF4D0
+/* USB port power or not: rd/wr */
+#define REG_USB0_FLAG 0xF461
+#define REG_USB1_FLAG 0xF462
+#define REG_USB2_FLAG 0xF463
+#define BIT_USB_FLAG_ON 1
+#define BIT_USB_FLAG_OFF 0
+/* LID */
+#define REG_LID_DETECT 0xF4BD
+#define BIT_LID_DETECT_ON 1
+#define BIT_LID_DETECT_OFF 0
+/* CRT */
+#define REG_CRT_DETECT 0xF4AD
+#define BIT_CRT_DETECT_PLUG 1
+#define BIT_CRT_DETECT_UNPLUG 0
+/* LCD backlight brightness adjust: 9 levels */
+#define REG_DISPLAY_BRIGHTNESS 0xF4F5
+/* Black screen Status */
+#define BIT_DISPLAY_LCD_ON 1
+#define BIT_DISPLAY_LCD_OFF 0
+/* LCD backlight control: off/restore */
+#define REG_BACKLIGHT_CTRL 0xF7BD
+#define BIT_BACKLIGHT_ON 1
+#define BIT_BACKLIGHT_OFF 0
+/* Reset the machine auto-clear: rd/wr */
+#define REG_RESET 0xF4EC
+#define BIT_RESET_ON 1
+/* Light the led: rd/wr */
+#define REG_LED 0xF4C8
+#define BIT_LED_RED_POWER (1 << 0)
+#define BIT_LED_ORANGE_POWER (1 << 1)
+#define BIT_LED_GREEN_CHARGE (1 << 2)
+#define BIT_LED_RED_CHARGE (1 << 3)
+#define BIT_LED_NUMLOCK (1 << 4)
+/* Test led mode, all led on/off */
+#define REG_LED_TEST 0xF4C2
+#define BIT_LED_TEST_IN 1
+#define BIT_LED_TEST_OUT 0
+/* Camera on/off */
+#define REG_CAMERA_STATUS 0xF46A
+#define BIT_CAMERA_STATUS_ON 1
+#define BIT_CAMERA_STATUS_OFF 0
+#define REG_CAMERA_CONTROL 0xF7B7
+#define BIT_CAMERA_CONTROL_OFF 0
+#define BIT_CAMERA_CONTROL_ON 1
+/* Wlan Status */
+#define REG_WLAN 0xF4FA
+#define BIT_WLAN_ON 1
+#define BIT_WLAN_OFF 0
+#define REG_DISPLAY_LCD 0xF79F
+
+/* SCI Event Number from EC */
+enum {
+ EVENT_LID = 0x23, /* LID open/close */
+ EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */
+ EVENT_SLEEP, /* Fn+F1 for entering sleep mode */
+ EVENT_OVERTEMP, /* Over-temperature happened */
+ EVENT_CRT_DETECT, /* CRT is connected */
+ EVENT_CAMERA, /* Camera on/off */
+ EVENT_USB_OC2, /* USB2 Over Current occurred */
+ EVENT_USB_OC0, /* USB0 Over Current occurred */
+ EVENT_BLACK_SCREEN, /* Turn on/off backlight */
+ EVENT_AUDIO_MUTE, /* Mute on/off */
+ EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */
+ EVENT_AC_BAT, /* AC & Battery relative issue */
+ EVENT_AUDIO_VOLUME, /* Volume adjust */
+ EVENT_WLAN, /* Wlan on/off */
+ EVENT_END
+};
+
+#endif /* !_EC_KB3310B_H */
--- /dev/null
+/*
+ * Copyright (C) 2007 Lemote Inc.
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */
+#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */
+#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */
+#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */
+
+#define LOONGSON_INT_BIT_INT0 (1 << 11)
+#define LOONGSON_INT_BIT_INT1 (1 << 12)
+
+/*
+ * The generic i8259_irq() make the kernel hang on booting. Since we cannot
+ * get the irq via the IRR directly, we access the ISR instead.
+ */
+int mach_i8259_irq(void)
+{
+ int irq, isr;
+
+ irq = -1;
+
+ if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) {
+ raw_spin_lock(&i8259A_lock);
+ isr = inb(PIC_MASTER_CMD) &
+ ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR);
+ if (!isr)
+ isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8;
+ irq = ffs(isr) - 1;
+ if (unlikely(irq == 7)) {
+ /*
+ * This may be a spurious interrupt.
+ *
+ * Read the interrupt status register (ISR). If the most
+ * significant bit is not set then there is no valid
+ * interrupt.
+ */
+ outb(0x0B, PIC_MASTER_ISR); /* ISR register */
+ if (~inb(PIC_MASTER_ISR) & 0x80)
+ irq = -1;
+ }
+ raw_spin_unlock(&i8259A_lock);
+ }
+
+ return irq;
+}
+EXPORT_SYMBOL(mach_i8259_irq);
+
+static void i8259_irqdispatch(void)
+{
+ int irq;
+
+ irq = mach_i8259_irq();
+ if (irq >= 0)
+ do_IRQ(irq);
+ else
+ spurious_interrupt();
+}
+
+void mach_irq_dispatch(unsigned int pending)
+{
+ if (pending & CAUSEF_IP7)
+ do_IRQ(LOONGSON_TIMER_IRQ);
+ else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */
+ do_perfcnt_IRQ();
+ bonito_irqdispatch();
+ } else if (pending & CAUSEF_IP3) /* CPU UART */
+ do_IRQ(LOONGSON_UART_IRQ);
+ else if (pending & CAUSEF_IP2) /* South Bridge */
+ i8259_irqdispatch();
+ else
+ spurious_interrupt();
+}
+
+static irqreturn_t ip6_action(int cpl, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static struct irqaction ip6_irqaction = {
+ .handler = ip6_action,
+ .name = "cascade",
+ .flags = IRQF_SHARED | IRQF_NO_THREAD,
+};
+
+static struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .name = "cascade",
+ .flags = IRQF_NO_THREAD,
+};
+
+void __init mach_init_irq(void)
+{
+ /* init all controller
+ * 0-15 ------> i8259 interrupt
+ * 16-23 ------> mips cpu interrupt
+ * 32-63 ------> bonito irq
+ */
+
+ /* setup cs5536 as high level trigger */
+ LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
+ LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
+
+ /* Sets the first-level interrupt dispatcher. */
+ mips_cpu_irq_init();
+ init_i8259_irqs();
+ bonito_irq_init();
+
+ /* setup north bridge irq (bonito) */
+ setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
+ /* setup source bridge irq (i8259) */
+ setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+void __init mach_prom_init_machtype(void)
+{
+ /* We share the same kernel image file among Lemote 2F family
+ * of machines, and provide the machtype= kernel command line
+ * to users to indicate their machine, this command line will
+ * be passed by the latest PMON automatically. and fortunately,
+ * up to now, we can get the machine type from the PMON_VER=
+ * commandline directly except the NAS machine, In the old
+ * machines, this will help the users a lot.
+ *
+ * If no "machtype=" passed, get machine type from "PMON_VER=".
+ * PMON_VER=LM8089 Lemote 8.9'' netbook
+ * LM8101 Lemote 10.1'' netbook
+ * (The above two netbooks have the same kernel support)
+ * LM6XXX Lemote FuLoong(2F) box series
+ * LM9XXX Lemote LynLoong PC series
+ */
+ if (strstr(arcs_cmdline, "PMON_VER=LM")) {
+ if (strstr(arcs_cmdline, "PMON_VER=LM8"))
+ mips_machtype = MACH_LEMOTE_YL2F89;
+ else if (strstr(arcs_cmdline, "PMON_VER=LM6"))
+ mips_machtype = MACH_LEMOTE_FL2F;
+ else if (strstr(arcs_cmdline, "PMON_VER=LM9"))
+ mips_machtype = MACH_LEMOTE_LL2F;
+ else
+ mips_machtype = MACH_LEMOTE_NAS;
+
+ strcat(arcs_cmdline, " machtype=");
+ strcat(arcs_cmdline, get_system_type());
+ strcat(arcs_cmdline, " ");
+ }
+}
--- /dev/null
+/*
+ * Lemote loongson2f family machines' specific suspend support
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/i8042.h>
+#include <linux/module.h>
+
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+#include <cs5536/cs5536_mfgpt.h>
+#include "ec_kb3310b.h"
+
+#define I8042_KBD_IRQ 1
+#define I8042_CTR_KBDINT 0x01
+#define I8042_CTR_KBDDIS 0x10
+
+static unsigned char i8042_ctr;
+
+static int i8042_enable_kbd_port(void)
+{
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
+ pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port."
+ "\n");
+ return -EIO;
+ }
+
+ i8042_ctr &= ~I8042_CTR_KBDDIS;
+ i8042_ctr |= I8042_CTR_KBDINT;
+
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+ i8042_ctr &= ~I8042_CTR_KBDINT;
+ i8042_ctr |= I8042_CTR_KBDDIS;
+ pr_err("i8042.c: Failed to enable KBD port.\n");
+
+ return -EIO;
+ }
+
+ return 0;
+}
+
+void setup_wakeup_events(void)
+{
+ int irq_mask;
+
+ switch (mips_machtype) {
+ case MACH_LEMOTE_ML2F7:
+ case MACH_LEMOTE_YL2F89:
+ /* open the keyboard irq in i8259A */
+ outb((0xff & ~(1 << I8042_KBD_IRQ)), PIC_MASTER_IMR);
+ irq_mask = inb(PIC_MASTER_IMR);
+
+ /* enable keyboard port */
+ i8042_enable_kbd_port();
+
+ /* Wakeup CPU via SCI lid open event */
+ outb(irq_mask & ~(1 << PIC_CASCADE_IR), PIC_MASTER_IMR);
+ inb(PIC_MASTER_IMR);
+ outb(0xff & ~(1 << (SCI_IRQ_NUM - 8)), PIC_SLAVE_IMR);
+ inb(PIC_SLAVE_IMR);
+
+ break;
+
+ default:
+ break;
+ }
+}
+
+static struct delayed_work lid_task;
+static int initialized;
+/* yeeloong_report_lid_status will be implemented in yeeloong_laptop.c */
+sci_handler yeeloong_report_lid_status;
+EXPORT_SYMBOL(yeeloong_report_lid_status);
+static void yeeloong_lid_update_task(struct work_struct *work)
+{
+ if (yeeloong_report_lid_status)
+ yeeloong_report_lid_status(BIT_LID_DETECT_ON);
+}
+
+int wakeup_loongson(void)
+{
+ int irq;
+
+ /* query the interrupt number */
+ irq = mach_i8259_irq();
+ if (irq < 0)
+ return 0;
+
+ printk(KERN_INFO "%s: irq = %d\n", __func__, irq);
+
+ if (irq == I8042_KBD_IRQ)
+ return 1;
+ else if (irq == SCI_IRQ_NUM) {
+ int ret, sci_event;
+ /* query the event number */
+ ret = ec_query_seq(CMD_GET_EVENT_NUM);
+ if (ret < 0)
+ return 0;
+ sci_event = ec_get_event_num();
+ if (sci_event < 0)
+ return 0;
+ if (sci_event == EVENT_LID) {
+ int lid_status;
+ /* check the LID status */
+ lid_status = ec_read(REG_LID_DETECT);
+ /* wakeup cpu when people open the LID */
+ if (lid_status == BIT_LID_DETECT_ON) {
+ /* If we call it directly here, the WARNING
+ * will be sent out by getnstimeofday
+ * via "WARN_ON(timekeeping_suspended);"
+ * because we can not schedule in suspend mode.
+ */
+ if (initialized == 0) {
+ INIT_DELAYED_WORK(&lid_task,
+ yeeloong_lid_update_task);
+ initialized = 1;
+ }
+ schedule_delayed_work(&lid_task, 1);
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+}
+
+void __weak mach_suspend(void)
+{
+ disable_mfgpt0_counter();
+}
+
+void __weak mach_resume(void)
+{
+ enable_mfgpt0_counter();
+}
--- /dev/null
+/* Board-specific reboot/shutdown routines
+ *
+ * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+#include <cs5536/cs5536.h>
+#include "ec_kb3310b.h"
+
+static void reset_cpu(void)
+{
+ /*
+ * reset cpu to full speed, this is needed when enabling cpu frequency
+ * scalling
+ */
+ LOONGSON_CHIPCFG(0) |= 0x7;
+}
+
+/* reset support for fuloong2f */
+
+static void fl2f_reboot(void)
+{
+ reset_cpu();
+
+ /* send a reset signal to south bridge.
+ *
+ * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset
+ * normally with this reset operation and it will not work in PMON, but
+ * you can type halt command and then reboot, seems the hardware reset
+ * logic not work normally.
+ */
+ {
+ u32 hi, lo;
+ _rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo);
+ lo |= 0x00000001;
+ _wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo);
+ }
+}
+
+static void fl2f_shutdown(void)
+{
+ u32 hi, lo, val;
+ int gpio_base;
+
+ /* get gpio base */
+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo);
+ gpio_base = lo & 0xff00;
+
+ /* make cs5536 gpio13 output enable */
+ val = inl(gpio_base + GPIOL_OUT_EN);
+ val &= ~(1 << (16 + 13));
+ val |= (1 << 13);
+ outl(val, gpio_base + GPIOL_OUT_EN);
+ mmiowb();
+ /* make cs5536 gpio13 output low level voltage. */
+ val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13));
+ val |= (1 << (16 + 13));
+ outl(val, gpio_base + GPIOL_OUT_VAL);
+ mmiowb();
+}
+
+/* reset support for yeeloong2f and mengloong2f notebook */
+
+static void ml2f_reboot(void)
+{
+ reset_cpu();
+
+ /* sending an reset signal to EC(embedded controller) */
+ ec_write(REG_RESET, BIT_RESET_ON);
+}
+
+#define yl2f89_reboot ml2f_reboot
+
+/* menglong(7inches) laptop has different shutdown logic from 8.9inches */
+#define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d
+#define EC_SHUTDOWN_IO_PORT_LOW 0xff2e
+#define EC_SHUTDOWN_IO_PORT_DATA 0xff2f
+#define REG_SHUTDOWN_HIGH 0xFC
+#define REG_SHUTDOWN_LOW 0x29
+#define BIT_SHUTDOWN_ON (1 << 1)
+
+static void ml2f_shutdown(void)
+{
+ u8 val;
+ u64 i;
+
+ outb(REG_SHUTDOWN_HIGH, EC_SHUTDOWN_IO_PORT_HIGH);
+ outb(REG_SHUTDOWN_LOW, EC_SHUTDOWN_IO_PORT_LOW);
+ mmiowb();
+ val = inb(EC_SHUTDOWN_IO_PORT_DATA);
+ outb(val & (~BIT_SHUTDOWN_ON), EC_SHUTDOWN_IO_PORT_DATA);
+ mmiowb();
+ /* need enough wait here... how many microseconds needs? */
+ for (i = 0; i < 0x10000; i++)
+ delay();
+ outb(val | BIT_SHUTDOWN_ON, EC_SHUTDOWN_IO_PORT_DATA);
+ mmiowb();
+}
+
+static void yl2f89_shutdown(void)
+{
+ /* cpu-gpio0 output low */
+ LOONGSON_GPIODATA &= ~0x00000001;
+ /* cpu-gpio0 as output */
+ LOONGSON_GPIOIE &= ~0x00000001;
+}
+
+void mach_prepare_reboot(void)
+{
+ switch (mips_machtype) {
+ case MACH_LEMOTE_FL2F:
+ case MACH_LEMOTE_NAS:
+ case MACH_LEMOTE_LL2F:
+ fl2f_reboot();
+ break;
+ case MACH_LEMOTE_ML2F7:
+ ml2f_reboot();
+ break;
+ case MACH_LEMOTE_YL2F89:
+ yl2f89_reboot();
+ break;
+ default:
+ break;
+ }
+}
+
+void mach_prepare_shutdown(void)
+{
+ switch (mips_machtype) {
+ case MACH_LEMOTE_FL2F:
+ case MACH_LEMOTE_NAS:
+ case MACH_LEMOTE_LL2F:
+ fl2f_shutdown();
+ break;
+ case MACH_LEMOTE_ML2F7:
+ ml2f_shutdown();
+ break;
+ case MACH_LEMOTE_YL2F89:
+ yl2f89_shutdown();
+ break;
+ default:
+ break;
+ }
+}
--- /dev/null
+#
+# Makefile for Loongson-3 family machines
+#
+obj-y += irq.o cop2-ex.o platform.o
+
+obj-$(CONFIG_SMP) += smp.o
+
+obj-$(CONFIG_NUMA) += numa.o
+
+obj-$(CONFIG_RS780_HPET) += hpet.o
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2014 Lemote Corporation.
+ * written by Huacai Chen <chenhc@lemote.com>
+ *
+ * based on arch/mips/cavium-octeon/cpu.c
+ * Copyright (C) 2009 Wind River Systems,
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/notifier.h>
+
+#include <asm/fpu.h>
+#include <asm/cop2.h>
+#include <asm/current.h>
+#include <asm/mipsregs.h>
+
+static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action,
+ void *data)
+{
+ int fpu_owned;
+ int fr = !test_thread_flag(TIF_32BIT_FPREGS);
+
+ switch (action) {
+ case CU2_EXCEPTION:
+ preempt_disable();
+ fpu_owned = __is_fpu_owner();
+ if (!fr)
+ set_c0_status(ST0_CU1 | ST0_CU2);
+ else
+ set_c0_status(ST0_CU1 | ST0_CU2 | ST0_FR);
+ enable_fpu_hazard();
+ KSTK_STATUS(current) |= (ST0_CU1 | ST0_CU2);
+ if (fr)
+ KSTK_STATUS(current) |= ST0_FR;
+ else
+ KSTK_STATUS(current) &= ~ST0_FR;
+ /* If FPU is owned, we needn't init or restore fp */
+ if (!fpu_owned) {
+ set_thread_flag(TIF_USEDFPU);
+ if (!used_math()) {
+ _init_fpu(current->thread.fpu.fcr31);
+ set_used_math();
+ } else
+ _restore_fp(current);
+ }
+ preempt_enable();
+
+ return NOTIFY_STOP; /* Don't call default notifier */
+ }
+
+ return NOTIFY_OK; /* Let default notifier send signals */
+}
+
+static int __init loongson_cu2_setup(void)
+{
+ return cu2_notifier(loongson_cu2_call, 0);
+}
+early_initcall(loongson_cu2_setup);
--- /dev/null
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/percpu.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+
+#include <asm/hpet.h>
+#include <asm/time.h>
+
+#define SMBUS_CFG_BASE (loongson_sysconf.ht_control_base + 0x0300a000)
+#define SMBUS_PCI_REG40 0x40
+#define SMBUS_PCI_REG64 0x64
+#define SMBUS_PCI_REGB4 0xb4
+
+static DEFINE_SPINLOCK(hpet_lock);
+DEFINE_PER_CPU(struct clock_event_device, hpet_clockevent_device);
+
+static unsigned int smbus_read(int offset)
+{
+ return *(volatile unsigned int *)(SMBUS_CFG_BASE + offset);
+}
+
+static void smbus_write(int offset, int data)
+{
+ *(volatile unsigned int *)(SMBUS_CFG_BASE + offset) = data;
+}
+
+static void smbus_enable(int offset, int bit)
+{
+ unsigned int cfg = smbus_read(offset);
+
+ cfg |= bit;
+ smbus_write(offset, cfg);
+}
+
+static int hpet_read(int offset)
+{
+ return *(volatile unsigned int *)(HPET_MMIO_ADDR + offset);
+}
+
+static void hpet_write(int offset, int data)
+{
+ *(volatile unsigned int *)(HPET_MMIO_ADDR + offset) = data;
+}
+
+static void hpet_start_counter(void)
+{
+ unsigned int cfg = hpet_read(HPET_CFG);
+
+ cfg |= HPET_CFG_ENABLE;
+ hpet_write(HPET_CFG, cfg);
+}
+
+static void hpet_stop_counter(void)
+{
+ unsigned int cfg = hpet_read(HPET_CFG);
+
+ cfg &= ~HPET_CFG_ENABLE;
+ hpet_write(HPET_CFG, cfg);
+}
+
+static void hpet_reset_counter(void)
+{
+ hpet_write(HPET_COUNTER, 0);
+ hpet_write(HPET_COUNTER + 4, 0);
+}
+
+static void hpet_restart_counter(void)
+{
+ hpet_stop_counter();
+ hpet_reset_counter();
+ hpet_start_counter();
+}
+
+static void hpet_enable_legacy_int(void)
+{
+ /* Do nothing on Loongson-3 */
+}
+
+static void hpet_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ int cfg = 0;
+
+ spin_lock(&hpet_lock);
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ pr_info("set clock event to periodic mode!\n");
+ /* stop counter */
+ hpet_stop_counter();
+
+ /* enables the timer0 to generate a periodic interrupt */
+ cfg = hpet_read(HPET_T0_CFG);
+ cfg &= ~HPET_TN_LEVEL;
+ cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
+ HPET_TN_SETVAL | HPET_TN_32BIT;
+ hpet_write(HPET_T0_CFG, cfg);
+
+ /* set the comparator */
+ hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL);
+ udelay(1);
+ hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL);
+
+ /* start counter */
+ hpet_start_counter();
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ cfg = hpet_read(HPET_T0_CFG);
+ cfg &= ~HPET_TN_ENABLE;
+ hpet_write(HPET_T0_CFG, cfg);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ pr_info("set clock event to one shot mode!\n");
+ cfg = hpet_read(HPET_T0_CFG);
+ /* set timer0 type
+ * 1 : periodic interrupt
+ * 0 : non-periodic(oneshot) interrupt
+ */
+ cfg &= ~HPET_TN_PERIODIC;
+ cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
+ hpet_write(HPET_T0_CFG, cfg);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ hpet_enable_legacy_int();
+ break;
+ }
+ spin_unlock(&hpet_lock);
+}
+
+static int hpet_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ unsigned int cnt;
+ int res;
+
+ cnt = hpet_read(HPET_COUNTER);
+ cnt += delta;
+ hpet_write(HPET_T0_CMP, cnt);
+
+ res = ((int)(hpet_read(HPET_COUNTER) - cnt) > 0) ? -ETIME : 0;
+ return res;
+}
+
+static irqreturn_t hpet_irq_handler(int irq, void *data)
+{
+ int is_irq;
+ struct clock_event_device *cd;
+ unsigned int cpu = smp_processor_id();
+
+ is_irq = hpet_read(HPET_STATUS);
+ if (is_irq & HPET_T0_IRS) {
+ /* clear the TIMER0 irq status register */
+ hpet_write(HPET_STATUS, HPET_T0_IRS);
+ cd = &per_cpu(hpet_clockevent_device, cpu);
+ cd->event_handler(cd);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static struct irqaction hpet_irq = {
+ .handler = hpet_irq_handler,
+ .flags = IRQF_NOBALANCING | IRQF_TIMER,
+ .name = "hpet",
+};
+
+/*
+ * hpet address assignation and irq setting should be done in bios.
+ * but pmon don't do this, we just setup here directly.
+ * The operation under is normal. unfortunately, hpet_setup process
+ * is before pci initialize.
+ *
+ * {
+ * struct pci_dev *pdev;
+ *
+ * pdev = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+ * pci_write_config_word(pdev, SMBUS_PCI_REGB4, HPET_ADDR);
+ *
+ * ...
+ * }
+ */
+static void hpet_setup(void)
+{
+ /* set hpet base address */
+ smbus_write(SMBUS_PCI_REGB4, HPET_ADDR);
+
+ /* enable decodeing of access to HPET MMIO*/
+ smbus_enable(SMBUS_PCI_REG40, (1 << 28));
+
+ /* HPET irq enable */
+ smbus_enable(SMBUS_PCI_REG64, (1 << 10));
+
+ hpet_enable_legacy_int();
+}
+
+void __init setup_hpet_timer(void)
+{
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd;
+
+ hpet_setup();
+
+ cd = &per_cpu(hpet_clockevent_device, cpu);
+ cd->name = "hpet";
+ cd->rating = 320;
+ cd->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ cd->set_mode = hpet_set_mode;
+ cd->set_next_event = hpet_next_event;
+ cd->irq = HPET_T0_IRQ;
+ cd->cpumask = cpumask_of(cpu);
+ clockevent_set_clock(cd, HPET_FREQ);
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
+ cd->min_delta_ns = 5000;
+
+ clockevents_register_device(cd);
+ setup_irq(HPET_T0_IRQ, &hpet_irq);
+ pr_info("hpet clock event device register\n");
+}
+
+static cycle_t hpet_read_counter(struct clocksource *cs)
+{
+ return (cycle_t)hpet_read(HPET_COUNTER);
+}
+
+static void hpet_suspend(struct clocksource *cs)
+{
+}
+
+static void hpet_resume(struct clocksource *cs)
+{
+ hpet_setup();
+ hpet_restart_counter();
+}
+
+static struct clocksource csrc_hpet = {
+ .name = "hpet",
+ /* mips clocksource rating is less than 300, so hpet is better. */
+ .rating = 300,
+ .read = hpet_read_counter,
+ .mask = CLOCKSOURCE_MASK(32),
+ /* oneshot mode work normal with this flag */
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .suspend = hpet_suspend,
+ .resume = hpet_resume,
+ .mult = 0,
+ .shift = 10,
+};
+
+int __init init_hpet_clocksource(void)
+{
+ csrc_hpet.mult = clocksource_hz2mult(HPET_FREQ, csrc_hpet.shift);
+ return clocksource_register_hz(&csrc_hpet, HPET_FREQ);
+}
+
+arch_initcall(init_hpet_clocksource);
--- /dev/null
+#include <loongson.h>
+#include <irq.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+#include "smp.h"
+
+unsigned int ht_irq[] = {0, 1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
+
+static void ht_irqdispatch(void)
+{
+ unsigned int i, irq;
+
+ irq = LOONGSON_HT1_INT_VECTOR(0);
+ LOONGSON_HT1_INT_VECTOR(0) = irq; /* Acknowledge the IRQs */
+
+ for (i = 0; i < ARRAY_SIZE(ht_irq); i++) {
+ if (irq & (0x1 << ht_irq[i]))
+ do_IRQ(ht_irq[i]);
+ }
+}
+
+void mach_irq_dispatch(unsigned int pending)
+{
+ if (pending & CAUSEF_IP7)
+ do_IRQ(LOONGSON_TIMER_IRQ);
+#if defined(CONFIG_SMP)
+ else if (pending & CAUSEF_IP6)
+ loongson3_ipi_interrupt(NULL);
+#endif
+ else if (pending & CAUSEF_IP3)
+ ht_irqdispatch();
+ else if (pending & CAUSEF_IP2)
+ do_IRQ(LOONGSON_UART_IRQ);
+ else {
+ pr_err("%s : spurious interrupt\n", __func__);
+ spurious_interrupt();
+ }
+}
+
+static struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .flags = IRQF_NO_SUSPEND,
+ .name = "cascade",
+};
+
+static inline void mask_loongson_irq(struct irq_data *d)
+{
+ clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ irq_disable_hazard();
+
+ /* Workaround: UART IRQ may deliver to any core */
+ if (d->irq == LOONGSON_UART_IRQ) {
+ int cpu = smp_processor_id();
+ int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node;
+ int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node;
+ u64 intenclr_addr = smp_group[node_id] |
+ (u64)(&LOONGSON_INT_ROUTER_INTENCLR);
+ u64 introuter_lpc_addr = smp_group[node_id] |
+ (u64)(&LOONGSON_INT_ROUTER_LPC);
+
+ *(volatile u32 *)intenclr_addr = 1 << 10;
+ *(volatile u8 *)introuter_lpc_addr = 0x10 + (1<<core_id);
+ }
+}
+
+static inline void unmask_loongson_irq(struct irq_data *d)
+{
+ /* Workaround: UART IRQ may deliver to any core */
+ if (d->irq == LOONGSON_UART_IRQ) {
+ int cpu = smp_processor_id();
+ int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node;
+ int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node;
+ u64 intenset_addr = smp_group[node_id] |
+ (u64)(&LOONGSON_INT_ROUTER_INTENSET);
+ u64 introuter_lpc_addr = smp_group[node_id] |
+ (u64)(&LOONGSON_INT_ROUTER_LPC);
+
+ *(volatile u32 *)intenset_addr = 1 << 10;
+ *(volatile u8 *)introuter_lpc_addr = 0x10 + (1<<core_id);
+ }
+
+ set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ irq_enable_hazard();
+}
+
+ /* For MIPS IRQs which shared by all cores */
+static struct irq_chip loongson_irq_chip = {
+ .name = "Loongson",
+ .irq_ack = mask_loongson_irq,
+ .irq_mask = mask_loongson_irq,
+ .irq_mask_ack = mask_loongson_irq,
+ .irq_unmask = unmask_loongson_irq,
+ .irq_eoi = unmask_loongson_irq,
+};
+
+void irq_router_init(void)
+{
+ int i;
+
+ /* route LPC int to cpu core0 int 0 */
+ LOONGSON_INT_ROUTER_LPC =
+ LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 0);
+ /* route HT1 int0 ~ int7 to cpu core0 INT1*/
+ for (i = 0; i < 8; i++)
+ LOONGSON_INT_ROUTER_HT1(i) =
+ LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 1);
+ /* enable HT1 interrupt */
+ LOONGSON_HT1_INTN_EN(0) = 0xffffffff;
+ /* enable router interrupt intenset */
+ LOONGSON_INT_ROUTER_INTENSET =
+ LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10;
+}
+
+void __init mach_init_irq(void)
+{
+ clear_c0_status(ST0_IM | ST0_BEV);
+
+ irq_router_init();
+ mips_cpu_irq_init();
+ init_i8259_irqs();
+ irq_set_chip_and_handler(LOONGSON_UART_IRQ,
+ &loongson_irq_chip, handle_level_irq);
+
+ /* setup HT1 irq */
+ setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
+
+ set_c0_status(STATUSF_IP2 | STATUSF_IP6);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+void fixup_irqs(void)
+{
+ irq_cpu_offline();
+ clear_c0_status(ST0_IM);
+}
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2010 Loongson Inc. & Lemote Inc. &
+ * Insititute of Computing Technology
+ * Author: Xiang Gao, gaoxiang@ict.ac.cn
+ * Huacai Chen, chenhc@lemote.com
+ * Xiaofu Meng, Shuangshuang Zhang
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/nodemask.h>
+#include <linux/swap.h>
+#include <linux/memblock.h>
+#include <linux/bootmem.h>
+#include <linux/pfn.h>
+#include <linux/highmem.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/sections.h>
+#include <linux/irq.h>
+#include <asm/bootinfo.h>
+#include <asm/mc146818-time.h>
+#include <asm/time.h>
+#include <asm/wbflush.h>
+#include <boot_param.h>
+
+static struct node_data prealloc__node_data[MAX_NUMNODES];
+unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
+EXPORT_SYMBOL(__node_distances);
+struct node_data *__node_data[MAX_NUMNODES];
+EXPORT_SYMBOL(__node_data);
+
+static void enable_lpa(void)
+{
+ unsigned long value;
+
+ value = __read_32bit_c0_register($16, 3);
+ value |= 0x00000080;
+ __write_32bit_c0_register($16, 3, value);
+ value = __read_32bit_c0_register($16, 3);
+ pr_info("CP0_Config3: CP0 16.3 (0x%lx)\n", value);
+
+ value = __read_32bit_c0_register($5, 1);
+ value |= 0x20000000;
+ __write_32bit_c0_register($5, 1, value);
+ value = __read_32bit_c0_register($5, 1);
+ pr_info("CP0_PageGrain: CP0 5.1 (0x%lx)\n", value);
+}
+
+static void cpu_node_probe(void)
+{
+ int i;
+
+ nodes_clear(node_possible_map);
+ nodes_clear(node_online_map);
+ for (i = 0; i < loongson_sysconf.nr_nodes; i++) {
+ node_set_state(num_online_nodes(), N_POSSIBLE);
+ node_set_online(num_online_nodes());
+ }
+
+ pr_info("NUMA: Discovered %d cpus on %d nodes\n",
+ loongson_sysconf.nr_cpus, num_online_nodes());
+}
+
+static int __init compute_node_distance(int row, int col)
+{
+ int package_row = row * loongson_sysconf.cores_per_node /
+ loongson_sysconf.cores_per_package;
+ int package_col = col * loongson_sysconf.cores_per_node /
+ loongson_sysconf.cores_per_package;
+
+ if (col == row)
+ return 0;
+ else if (package_row == package_col)
+ return 40;
+ else
+ return 100;
+}
+
+static void __init init_topology_matrix(void)
+{
+ int row, col;
+
+ for (row = 0; row < MAX_NUMNODES; row++)
+ for (col = 0; col < MAX_NUMNODES; col++)
+ __node_distances[row][col] = -1;
+
+ for_each_online_node(row) {
+ for_each_online_node(col) {
+ __node_distances[row][col] =
+ compute_node_distance(row, col);
+ }
+ }
+}
+
+static unsigned long nid_to_addroffset(unsigned int nid)
+{
+ unsigned long result;
+ switch (nid) {
+ case 0:
+ default:
+ result = NODE0_ADDRSPACE_OFFSET;
+ break;
+ case 1:
+ result = NODE1_ADDRSPACE_OFFSET;
+ break;
+ case 2:
+ result = NODE2_ADDRSPACE_OFFSET;
+ break;
+ case 3:
+ result = NODE3_ADDRSPACE_OFFSET;
+ break;
+ }
+ return result;
+}
+
+static void __init szmem(unsigned int node)
+{
+ u32 i, mem_type;
+ static unsigned long num_physpages = 0;
+ u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
+
+ /* Parse memory information and activate */
+ for (i = 0; i < loongson_memmap->nr_map; i++) {
+ node_id = loongson_memmap->map[i].node_id;
+ if (node_id != node)
+ continue;
+
+ mem_type = loongson_memmap->map[i].mem_type;
+ mem_size = loongson_memmap->map[i].mem_size;
+ mem_start = loongson_memmap->map[i].mem_start;
+
+ switch (mem_type) {
+ case SYSTEM_RAM_LOW:
+ start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
+ node_psize = (mem_size << 20) >> PAGE_SHIFT;
+ end_pfn = start_pfn + node_psize;
+ num_physpages += node_psize;
+ pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+ (u32)node_id, mem_type, mem_start, mem_size);
+ pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+ start_pfn, end_pfn, num_physpages);
+ add_memory_region((node_id << 44) + mem_start,
+ (u64)mem_size << 20, BOOT_MEM_RAM);
+ memblock_add_node(PFN_PHYS(start_pfn),
+ PFN_PHYS(end_pfn - start_pfn), node);
+ break;
+ case SYSTEM_RAM_HIGH:
+ start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
+ node_psize = (mem_size << 20) >> PAGE_SHIFT;
+ end_pfn = start_pfn + node_psize;
+ num_physpages += node_psize;
+ pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+ (u32)node_id, mem_type, mem_start, mem_size);
+ pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+ start_pfn, end_pfn, num_physpages);
+ add_memory_region((node_id << 44) + mem_start,
+ (u64)mem_size << 20, BOOT_MEM_RAM);
+ memblock_add_node(PFN_PHYS(start_pfn),
+ PFN_PHYS(end_pfn - start_pfn), node);
+ break;
+ case MEM_RESERVED:
+ pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+ (u32)node_id, mem_type, mem_start, mem_size);
+ add_memory_region((node_id << 44) + mem_start,
+ (u64)mem_size << 20, BOOT_MEM_RESERVED);
+ memblock_reserve(((node_id << 44) + mem_start),
+ mem_size << 20);
+ break;
+ }
+ }
+}
+
+static void __init node_mem_init(unsigned int node)
+{
+ unsigned long bootmap_size;
+ unsigned long node_addrspace_offset;
+ unsigned long start_pfn, end_pfn, freepfn;
+
+ node_addrspace_offset = nid_to_addroffset(node);
+ pr_info("Node%d's addrspace_offset is 0x%lx\n",
+ node, node_addrspace_offset);
+
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
+ freepfn = start_pfn;
+ if (node == 0)
+ freepfn = PFN_UP(__pa_symbol(&_end)); /* kernel end address */
+ pr_info("Node%d: start_pfn=0x%lx, end_pfn=0x%lx, freepfn=0x%lx\n",
+ node, start_pfn, end_pfn, freepfn);
+
+ __node_data[node] = prealloc__node_data + node;
+
+ NODE_DATA(node)->bdata = &bootmem_node_data[node];
+ NODE_DATA(node)->node_start_pfn = start_pfn;
+ NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
+
+ bootmap_size = init_bootmem_node(NODE_DATA(node), freepfn,
+ start_pfn, end_pfn);
+ free_bootmem_with_active_regions(node, end_pfn);
+ if (node == 0) /* used by finalize_initrd() */
+ max_low_pfn = end_pfn;
+
+ /* This is reserved for the kernel and bdata->node_bootmem_map */
+ reserve_bootmem_node(NODE_DATA(node), start_pfn << PAGE_SHIFT,
+ ((freepfn - start_pfn) << PAGE_SHIFT) + bootmap_size,
+ BOOTMEM_DEFAULT);
+
+ if (node == 0 && node_end_pfn(0) >= (0xffffffff >> PAGE_SHIFT)) {
+ /* Reserve 0xff800000~0xffffffff for RS780E integrated GPU */
+ reserve_bootmem_node(NODE_DATA(node),
+ (node_addrspace_offset | 0xff800000),
+ 8 << 20, BOOTMEM_DEFAULT);
+ }
+
+ sparse_memory_present_with_active_regions(node);
+}
+
+static __init void prom_meminit(void)
+{
+ unsigned int node, cpu, active_cpu = 0;
+
+ cpu_node_probe();
+ init_topology_matrix();
+
+ for (node = 0; node < loongson_sysconf.nr_nodes; node++) {
+ if (node_online(node)) {
+ szmem(node);
+ node_mem_init(node);
+ cpumask_clear(&__node_data[(node)]->cpumask);
+ }
+ }
+ for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) {
+ node = cpu / loongson_sysconf.cores_per_node;
+ if (node >= num_online_nodes())
+ node = 0;
+
+ if (loongson_sysconf.reserved_cpus_mask & (1<<cpu))
+ continue;
+
+ cpumask_set_cpu(active_cpu, &__node_data[(node)]->cpumask);
+ pr_info("NUMA: set cpumask cpu %d on node %d\n", active_cpu, node);
+
+ active_cpu++;
+ }
+}
+
+void __init paging_init(void)
+{
+ unsigned node;
+ unsigned long zones_size[MAX_NR_ZONES] = {0, };
+
+ pagetable_init();
+
+ for_each_online_node(node) {
+ unsigned long start_pfn, end_pfn;
+
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
+
+ if (end_pfn > max_low_pfn)
+ max_low_pfn = end_pfn;
+ }
+#ifdef CONFIG_ZONE_DMA32
+ zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
+#endif
+ zones_size[ZONE_NORMAL] = max_low_pfn;
+ free_area_init_nodes(zones_size);
+}
+
+void __init mem_init(void)
+{
+ high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT);
+ free_all_bootmem();
+ setup_zero_pages(); /* This comes from node 0 */
+ mem_init_print_info(NULL);
+}
+
+/* All PCI device belongs to logical Node-0 */
+int pcibus_to_node(struct pci_bus *bus)
+{
+ return 0;
+}
+EXPORT_SYMBOL(pcibus_to_node);
+
+void __init prom_init_numa_memory(void)
+{
+ enable_lpa();
+ prom_meminit();
+}
+EXPORT_SYMBOL(prom_init_numa_memory);
--- /dev/null
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ * Xiang Yu, xiangy@lemote.com
+ * Chen Huacai, chenhc@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <asm/bootinfo.h>
+#include <boot_param.h>
+#include <loongson_hwmon.h>
+#include <workarounds.h>
+
+static int __init loongson3_platform_init(void)
+{
+ int i;
+ struct platform_device *pdev;
+
+ if (loongson_sysconf.ecname[0] != '\0')
+ platform_device_register_simple(loongson_sysconf.ecname, -1, NULL, 0);
+
+ for (i = 0; i < loongson_sysconf.nr_sensors; i++) {
+ if (loongson_sysconf.sensors[i].type > SENSOR_FAN)
+ continue;
+
+ pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+ pdev->name = loongson_sysconf.sensors[i].name;
+ pdev->id = loongson_sysconf.sensors[i].id;
+ pdev->dev.platform_data = &loongson_sysconf.sensors[i];
+ platform_device_register(pdev);
+ }
+
+ return 0;
+}
+
+arch_initcall(loongson3_platform_init);
--- /dev/null
+/*
+ * Copyright (C) 2010, 2011, 2012, Lemote, Inc.
+ * Author: Chen Huacai, chenhc@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <asm/processor.h>
+#include <asm/time.h>
+#include <asm/clock.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+#include <loongson.h>
+#include <workarounds.h>
+
+#include "smp.h"
+
+DEFINE_PER_CPU(int, cpu_state);
+DEFINE_PER_CPU(uint32_t, core0_c0count);
+
+static void *ipi_set0_regs[16];
+static void *ipi_clear0_regs[16];
+static void *ipi_status0_regs[16];
+static void *ipi_en0_regs[16];
+static void *ipi_mailbox_buf[16];
+
+/* read a 32bit value from ipi register */
+#define loongson3_ipi_read32(addr) readl(addr)
+/* read a 64bit value from ipi register */
+#define loongson3_ipi_read64(addr) readq(addr)
+/* write a 32bit value to ipi register */
+#define loongson3_ipi_write32(action, addr) \
+ do { \
+ writel(action, addr); \
+ __wbflush(); \
+ } while (0)
+/* write a 64bit value to ipi register */
+#define loongson3_ipi_write64(action, addr) \
+ do { \
+ writeq(action, addr); \
+ __wbflush(); \
+ } while (0)
+
+static void ipi_set0_regs_init(void)
+{
+ ipi_set0_regs[0] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + SET0);
+ ipi_set0_regs[1] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + SET0);
+ ipi_set0_regs[2] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + SET0);
+ ipi_set0_regs[3] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + SET0);
+ ipi_set0_regs[4] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + SET0);
+ ipi_set0_regs[5] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + SET0);
+ ipi_set0_regs[6] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + SET0);
+ ipi_set0_regs[7] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + SET0);
+ ipi_set0_regs[8] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + SET0);
+ ipi_set0_regs[9] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + SET0);
+ ipi_set0_regs[10] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + SET0);
+ ipi_set0_regs[11] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + SET0);
+ ipi_set0_regs[12] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + SET0);
+ ipi_set0_regs[13] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + SET0);
+ ipi_set0_regs[14] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + SET0);
+ ipi_set0_regs[15] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + SET0);
+}
+
+static void ipi_clear0_regs_init(void)
+{
+ ipi_clear0_regs[0] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + CLEAR0);
+ ipi_clear0_regs[1] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + CLEAR0);
+ ipi_clear0_regs[2] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + CLEAR0);
+ ipi_clear0_regs[3] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + CLEAR0);
+ ipi_clear0_regs[4] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + CLEAR0);
+ ipi_clear0_regs[5] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + CLEAR0);
+ ipi_clear0_regs[6] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + CLEAR0);
+ ipi_clear0_regs[7] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + CLEAR0);
+ ipi_clear0_regs[8] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + CLEAR0);
+ ipi_clear0_regs[9] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + CLEAR0);
+ ipi_clear0_regs[10] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + CLEAR0);
+ ipi_clear0_regs[11] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + CLEAR0);
+ ipi_clear0_regs[12] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + CLEAR0);
+ ipi_clear0_regs[13] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + CLEAR0);
+ ipi_clear0_regs[14] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + CLEAR0);
+ ipi_clear0_regs[15] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + CLEAR0);
+}
+
+static void ipi_status0_regs_init(void)
+{
+ ipi_status0_regs[0] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + STATUS0);
+ ipi_status0_regs[1] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + STATUS0);
+ ipi_status0_regs[2] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + STATUS0);
+ ipi_status0_regs[3] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + STATUS0);
+ ipi_status0_regs[4] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + STATUS0);
+ ipi_status0_regs[5] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + STATUS0);
+ ipi_status0_regs[6] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + STATUS0);
+ ipi_status0_regs[7] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + STATUS0);
+ ipi_status0_regs[8] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + STATUS0);
+ ipi_status0_regs[9] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + STATUS0);
+ ipi_status0_regs[10] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + STATUS0);
+ ipi_status0_regs[11] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + STATUS0);
+ ipi_status0_regs[12] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + STATUS0);
+ ipi_status0_regs[13] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + STATUS0);
+ ipi_status0_regs[14] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + STATUS0);
+ ipi_status0_regs[15] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + STATUS0);
+}
+
+static void ipi_en0_regs_init(void)
+{
+ ipi_en0_regs[0] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + EN0);
+ ipi_en0_regs[1] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + EN0);
+ ipi_en0_regs[2] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + EN0);
+ ipi_en0_regs[3] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + EN0);
+ ipi_en0_regs[4] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + EN0);
+ ipi_en0_regs[5] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + EN0);
+ ipi_en0_regs[6] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + EN0);
+ ipi_en0_regs[7] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + EN0);
+ ipi_en0_regs[8] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + EN0);
+ ipi_en0_regs[9] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + EN0);
+ ipi_en0_regs[10] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + EN0);
+ ipi_en0_regs[11] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + EN0);
+ ipi_en0_regs[12] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + EN0);
+ ipi_en0_regs[13] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + EN0);
+ ipi_en0_regs[14] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + EN0);
+ ipi_en0_regs[15] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + EN0);
+}
+
+static void ipi_mailbox_buf_init(void)
+{
+ ipi_mailbox_buf[0] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + BUF);
+ ipi_mailbox_buf[1] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + BUF);
+ ipi_mailbox_buf[2] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + BUF);
+ ipi_mailbox_buf[3] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + BUF);
+ ipi_mailbox_buf[4] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + BUF);
+ ipi_mailbox_buf[5] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + BUF);
+ ipi_mailbox_buf[6] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + BUF);
+ ipi_mailbox_buf[7] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + BUF);
+ ipi_mailbox_buf[8] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + BUF);
+ ipi_mailbox_buf[9] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + BUF);
+ ipi_mailbox_buf[10] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + BUF);
+ ipi_mailbox_buf[11] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + BUF);
+ ipi_mailbox_buf[12] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + BUF);
+ ipi_mailbox_buf[13] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + BUF);
+ ipi_mailbox_buf[14] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + BUF);
+ ipi_mailbox_buf[15] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + BUF);
+}
+
+/*
+ * Simple enough, just poke the appropriate ipi register
+ */
+static void loongson3_send_ipi_single(int cpu, unsigned int action)
+{
+ loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(cpu)]);
+}
+
+static void
+loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+{
+ unsigned int i;
+
+ for_each_cpu(i, mask)
+ loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(i)]);
+}
+
+void loongson3_ipi_interrupt(struct pt_regs *regs)
+{
+ int i, cpu = smp_processor_id();
+ unsigned int action, c0count;
+
+ /* Load the ipi register to figure out what we're supposed to do */
+ action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]);
+
+ /* Clear the ipi register to clear the interrupt */
+ loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu_logical_map(cpu)]);
+
+ if (action & SMP_RESCHEDULE_YOURSELF)
+ scheduler_ipi();
+
+ if (action & SMP_CALL_FUNCTION)
+ smp_call_function_interrupt();
+
+ if (action & SMP_ASK_C0COUNT) {
+ BUG_ON(cpu != 0);
+ c0count = read_c0_count();
+ for (i = 1; i < num_possible_cpus(); i++)
+ per_cpu(core0_c0count, i) = c0count;
+ }
+}
+
+#define MAX_LOOPS 1111
+/*
+ * SMP init and finish on secondary CPUs
+ */
+static void loongson3_init_secondary(void)
+{
+ int i;
+ uint32_t initcount;
+ unsigned int cpu = smp_processor_id();
+ unsigned int imask = STATUSF_IP7 | STATUSF_IP6 |
+ STATUSF_IP3 | STATUSF_IP2;
+
+ /* Set interrupt mask, but don't enable */
+ change_c0_status(ST0_IM, imask);
+
+ for (i = 0; i < num_possible_cpus(); i++)
+ loongson3_ipi_write32(0xffffffff, ipi_en0_regs[cpu_logical_map(i)]);
+
+ per_cpu(cpu_state, cpu) = CPU_ONLINE;
+ cpu_data[cpu].core =
+ cpu_logical_map(cpu) % loongson_sysconf.cores_per_package;
+ cpu_data[cpu].package =
+ cpu_logical_map(cpu) / loongson_sysconf.cores_per_package;
+
+ i = 0;
+ __this_cpu_write(core0_c0count, 0);
+ loongson3_send_ipi_single(0, SMP_ASK_C0COUNT);
+ while (!__this_cpu_read(core0_c0count)) {
+ i++;
+ cpu_relax();
+ }
+
+ if (i > MAX_LOOPS)
+ i = MAX_LOOPS;
+ initcount = __this_cpu_read(core0_c0count) + i;
+ write_c0_count(initcount);
+}
+
+static void loongson3_smp_finish(void)
+{
+ int cpu = smp_processor_id();
+
+ write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+ local_irq_enable();
+ loongson3_ipi_write64(0,
+ (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x0));
+ pr_info("CPU#%d finished, CP0_ST=%x\n",
+ smp_processor_id(), read_c0_status());
+}
+
+static void __init loongson3_smp_setup(void)
+{
+ int i = 0, num = 0; /* i: physical id, num: logical id */
+
+ init_cpu_possible(cpu_none_mask);
+
+ /* For unified kernel, NR_CPUS is the maximum possible value,
+ * loongson_sysconf.nr_cpus is the really present value */
+ while (i < loongson_sysconf.nr_cpus) {
+ if (loongson_sysconf.reserved_cpus_mask & (1<<i)) {
+ /* Reserved physical CPU cores */
+ __cpu_number_map[i] = -1;
+ } else {
+ __cpu_number_map[i] = num;
+ __cpu_logical_map[num] = i;
+ set_cpu_possible(num, true);
+ num++;
+ }
+ i++;
+ }
+ pr_info("Detected %i available CPU(s)\n", num);
+
+ while (num < loongson_sysconf.nr_cpus) {
+ __cpu_logical_map[num] = -1;
+ num++;
+ }
+
+ ipi_set0_regs_init();
+ ipi_clear0_regs_init();
+ ipi_status0_regs_init();
+ ipi_en0_regs_init();
+ ipi_mailbox_buf_init();
+ cpu_data[0].core = cpu_logical_map(0) % loongson_sysconf.cores_per_package;
+ cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package;
+}
+
+static void __init loongson3_prepare_cpus(unsigned int max_cpus)
+{
+ init_cpu_present(cpu_possible_mask);
+ per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+}
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it runing!
+ */
+static void loongson3_boot_secondary(int cpu, struct task_struct *idle)
+{
+ unsigned long startargs[4];
+
+ pr_info("Booting CPU#%d...\n", cpu);
+
+ /* startargs[] are initial PC, SP and GP for secondary CPU */
+ startargs[0] = (unsigned long)&smp_bootstrap;
+ startargs[1] = (unsigned long)__KSTK_TOS(idle);
+ startargs[2] = (unsigned long)task_thread_info(idle);
+ startargs[3] = 0;
+
+ pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n",
+ cpu, startargs[0], startargs[1], startargs[2]);
+
+ loongson3_ipi_write64(startargs[3],
+ (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x18));
+ loongson3_ipi_write64(startargs[2],
+ (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x10));
+ loongson3_ipi_write64(startargs[1],
+ (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x8));
+ loongson3_ipi_write64(startargs[0],
+ (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x0));
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int loongson3_cpu_disable(void)
+{
+ unsigned long flags;
+ unsigned int cpu = smp_processor_id();
+
+ if (cpu == 0)
+ return -EBUSY;
+
+ set_cpu_online(cpu, false);
+ cpumask_clear_cpu(cpu, &cpu_callin_map);
+ local_irq_save(flags);
+ fixup_irqs();
+ local_irq_restore(flags);
+ flush_cache_all();
+ local_flush_tlb_all();
+
+ return 0;
+}
+
+
+static void loongson3_cpu_die(unsigned int cpu)
+{
+ while (per_cpu(cpu_state, cpu) != CPU_DEAD)
+ cpu_relax();
+
+ mb();
+}
+
+/* To shutdown a core in Loongson 3, the target core should go to CKSEG1 and
+ * flush all L1 entries at first. Then, another core (usually Core 0) can
+ * safely disable the clock of the target core. loongson3_play_dead() is
+ * called via CKSEG1 (uncached and unmmaped) */
+static void loongson3a_play_dead(int *state_addr)
+{
+ register int val;
+ register long cpuid, core, node, count;
+ register void *addr, *base, *initfunc;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " li %[addr], 0x80000000 \n" /* KSEG0 */
+ "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */
+ " cache 0, 1(%[addr]) \n"
+ " cache 0, 2(%[addr]) \n"
+ " cache 0, 3(%[addr]) \n"
+ " cache 1, 0(%[addr]) \n" /* flush L1 DCache */
+ " cache 1, 1(%[addr]) \n"
+ " cache 1, 2(%[addr]) \n"
+ " cache 1, 3(%[addr]) \n"
+ " addiu %[sets], %[sets], -1 \n"
+ " bnez %[sets], 1b \n"
+ " addiu %[addr], %[addr], 0x20 \n"
+ " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */
+ " sw %[val], (%[state_addr]) \n"
+ " sync \n"
+ " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */
+ " .set pop \n"
+ : [addr] "=&r" (addr), [val] "=&r" (val)
+ : [state_addr] "r" (state_addr),
+ [sets] "r" (cpu_data[smp_processor_id()].dcache.sets));
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips64 \n"
+ " mfc0 %[cpuid], $15, 1 \n"
+ " andi %[cpuid], 0x3ff \n"
+ " dli %[base], 0x900000003ff01000 \n"
+ " andi %[core], %[cpuid], 0x3 \n"
+ " sll %[core], 8 \n" /* get core id */
+ " or %[base], %[base], %[core] \n"
+ " andi %[node], %[cpuid], 0xc \n"
+ " dsll %[node], 42 \n" /* get node id */
+ " or %[base], %[base], %[node] \n"
+ "1: li %[count], 0x100 \n" /* wait for init loop */
+ "2: bnez %[count], 2b \n" /* limit mailbox access */
+ " addiu %[count], -1 \n"
+ " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */
+ " beqz %[initfunc], 1b \n"
+ " nop \n"
+ " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */
+ " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */
+ " ld $a1, 0x38(%[base]) \n"
+ " jr %[initfunc] \n" /* jump to initial PC */
+ " nop \n"
+ " .set pop \n"
+ : [core] "=&r" (core), [node] "=&r" (node),
+ [base] "=&r" (base), [cpuid] "=&r" (cpuid),
+ [count] "=&r" (count), [initfunc] "=&r" (initfunc)
+ : /* No Input */
+ : "a1");
+}
+
+static void loongson3b_play_dead(int *state_addr)
+{
+ register int val;
+ register long cpuid, core, node, count;
+ register void *addr, *base, *initfunc;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " li %[addr], 0x80000000 \n" /* KSEG0 */
+ "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */
+ " cache 0, 1(%[addr]) \n"
+ " cache 0, 2(%[addr]) \n"
+ " cache 0, 3(%[addr]) \n"
+ " cache 1, 0(%[addr]) \n" /* flush L1 DCache */
+ " cache 1, 1(%[addr]) \n"
+ " cache 1, 2(%[addr]) \n"
+ " cache 1, 3(%[addr]) \n"
+ " addiu %[sets], %[sets], -1 \n"
+ " bnez %[sets], 1b \n"
+ " addiu %[addr], %[addr], 0x20 \n"
+ " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */
+ " sw %[val], (%[state_addr]) \n"
+ " sync \n"
+ " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */
+ " .set pop \n"
+ : [addr] "=&r" (addr), [val] "=&r" (val)
+ : [state_addr] "r" (state_addr),
+ [sets] "r" (cpu_data[smp_processor_id()].dcache.sets));
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips64 \n"
+ " mfc0 %[cpuid], $15, 1 \n"
+ " andi %[cpuid], 0x3ff \n"
+ " dli %[base], 0x900000003ff01000 \n"
+ " andi %[core], %[cpuid], 0x3 \n"
+ " sll %[core], 8 \n" /* get core id */
+ " or %[base], %[base], %[core] \n"
+ " andi %[node], %[cpuid], 0xc \n"
+ " dsll %[node], 42 \n" /* get node id */
+ " or %[base], %[base], %[node] \n"
+ " dsrl %[node], 30 \n" /* 15:14 */
+ " or %[base], %[base], %[node] \n"
+ "1: li %[count], 0x100 \n" /* wait for init loop */
+ "2: bnez %[count], 2b \n" /* limit mailbox access */
+ " addiu %[count], -1 \n"
+ " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */
+ " beqz %[initfunc], 1b \n"
+ " nop \n"
+ " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */
+ " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */
+ " ld $a1, 0x38(%[base]) \n"
+ " jr %[initfunc] \n" /* jump to initial PC */
+ " nop \n"
+ " .set pop \n"
+ : [core] "=&r" (core), [node] "=&r" (node),
+ [base] "=&r" (base), [cpuid] "=&r" (cpuid),
+ [count] "=&r" (count), [initfunc] "=&r" (initfunc)
+ : /* No Input */
+ : "a1");
+}
+
+void play_dead(void)
+{
+ int *state_addr;
+ unsigned int cpu = smp_processor_id();
+ void (*play_dead_at_ckseg1)(int *);
+
+ idle_task_exit();
+ switch (loongson_sysconf.cputype) {
+ case Loongson_3A:
+ default:
+ play_dead_at_ckseg1 =
+ (void *)CKSEG1ADDR((unsigned long)loongson3a_play_dead);
+ break;
+ case Loongson_3B:
+ play_dead_at_ckseg1 =
+ (void *)CKSEG1ADDR((unsigned long)loongson3b_play_dead);
+ break;
+ }
+ state_addr = &per_cpu(cpu_state, cpu);
+ mb();
+ play_dead_at_ckseg1(state_addr);
+}
+
+void loongson3_disable_clock(int cpu)
+{
+ uint64_t core_id = cpu_data[cpu].core;
+ uint64_t package_id = cpu_data[cpu].package;
+
+ if (loongson_sysconf.cputype == Loongson_3A) {
+ LOONGSON_CHIPCFG(package_id) &= ~(1 << (12 + core_id));
+ } else if (loongson_sysconf.cputype == Loongson_3B) {
+ if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG))
+ LOONGSON_FREQCTRL(package_id) &= ~(1 << (core_id * 4 + 3));
+ }
+}
+
+void loongson3_enable_clock(int cpu)
+{
+ uint64_t core_id = cpu_data[cpu].core;
+ uint64_t package_id = cpu_data[cpu].package;
+
+ if (loongson_sysconf.cputype == Loongson_3A) {
+ LOONGSON_CHIPCFG(package_id) |= 1 << (12 + core_id);
+ } else if (loongson_sysconf.cputype == Loongson_3B) {
+ if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG))
+ LOONGSON_FREQCTRL(package_id) |= 1 << (core_id * 4 + 3);
+ }
+}
+
+#define CPU_POST_DEAD_FROZEN (CPU_POST_DEAD | CPU_TASKS_FROZEN)
+static int loongson3_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+
+ switch (action) {
+ case CPU_POST_DEAD:
+ case CPU_POST_DEAD_FROZEN:
+ pr_info("Disable clock for CPU#%d\n", cpu);
+ loongson3_disable_clock(cpu);
+ break;
+ case CPU_UP_PREPARE:
+ case CPU_UP_PREPARE_FROZEN:
+ pr_info("Enable clock for CPU#%d\n", cpu);
+ loongson3_enable_clock(cpu);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static int register_loongson3_notifier(void)
+{
+ hotcpu_notifier(loongson3_cpu_callback, 0);
+ return 0;
+}
+early_initcall(register_loongson3_notifier);
+
+#endif
+
+struct plat_smp_ops loongson3_smp_ops = {
+ .send_ipi_single = loongson3_send_ipi_single,
+ .send_ipi_mask = loongson3_send_ipi_mask,
+ .init_secondary = loongson3_init_secondary,
+ .smp_finish = loongson3_smp_finish,
+ .boot_secondary = loongson3_boot_secondary,
+ .smp_setup = loongson3_smp_setup,
+ .prepare_cpus = loongson3_prepare_cpus,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_disable = loongson3_cpu_disable,
+ .cpu_die = loongson3_cpu_die,
+#endif
+};
--- /dev/null
+#ifndef __LOONGSON_SMP_H_
+#define __LOONGSON_SMP_H_
+
+/* for Loongson-3 smp support */
+extern unsigned long long smp_group[4];
+
+/* 4 groups(nodes) in maximum in numa case */
+#define SMP_CORE_GROUP0_BASE (smp_group[0])
+#define SMP_CORE_GROUP1_BASE (smp_group[1])
+#define SMP_CORE_GROUP2_BASE (smp_group[2])
+#define SMP_CORE_GROUP3_BASE (smp_group[3])
+
+/* 4 cores in each group(node) */
+#define SMP_CORE0_OFFSET 0x000
+#define SMP_CORE1_OFFSET 0x100
+#define SMP_CORE2_OFFSET 0x200
+#define SMP_CORE3_OFFSET 0x300
+
+/* ipi registers offsets */
+#define STATUS0 0x00
+#define EN0 0x04
+#define SET0 0x08
+#define CLEAR0 0x0c
+#define STATUS1 0x10
+#define MASK1 0x14
+#define SET1 0x18
+#define CLEAR1 0x1c
+#define BUF 0x20
+
+#endif
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
-obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
+obj-$(CONFIG_MACH_LOONGSON32) += clk-ls1x.o
obj-$(CONFIG_COMMON_CLK_MAX_GEN) += clk-max-gen.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
obj-$(CONFIG_COMMON_CLK_MAX77802) += clk-max77802.o
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <asm/mach-loongson1/cpufreq.h>
-#include <asm/mach-loongson1/loongson1.h>
+#include <cpufreq.h>
+#include <loongson1.h>
static struct {
struct device *dev;
config RTC_DRV_LOONGSON1
tristate "loongson1 RTC support"
- depends on MACH_LOONGSON1
+ depends on MACH_LOONGSON32
help
This is a driver for the loongson1 on-chip Counter0 (Time-Of-Year
counter) to be used as a RTC.
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/io.h>
-#include <asm/mach-loongson1/loongson1.h>
+#include <loongson1.h>
#define LS1X_RTC_REG_OFFSET (LS1X_RTC_BASE + 0x20)
#define LS1X_RTC_REGS(x) \
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff