typedef struct Stats
{
- unsigned long txrdu;
unsigned long rxrdu;
unsigned long rxok;
- unsigned long rxframgment;
unsigned long rxcmdpkt[4]; //08/05/08 amy rx cmd element txfeedback/bcn report/cfg set/query
- unsigned long rxurberr;
- unsigned long rxstaterr;
- unsigned long rxcrcerrmin;//crc error (0-500)
- unsigned long rxcrcerrmid;//crc error (500-1000)
- unsigned long rxcrcerrmax;//crc error (>1000)
+ unsigned long rxurberr; /* remove */
unsigned long received_rate_histogram[4][32]; //0: Total, 1:OK, 2:CRC, 3:ICV, 2007 07 03 cosa
unsigned long received_preamble_GI[2][32]; //0: Long preamble/GI, 1:Short preamble/GI
unsigned long rx_AMPDUsize_histogram[5]; // level: (<4K), (4K~8K), (8K~16K), (16K~32K), (32K~64K)
unsigned long rx_AMPDUnum_histogram[5]; // level: (<5), (5~10), (10~20), (20~40), (>40)
- unsigned long numpacket_matchbssid; // debug use only.
- unsigned long numpacket_toself; // debug use only.
- unsigned long num_process_phyinfo; // debug use only.
- unsigned long numqry_phystatus;
- unsigned long numqry_phystatusCCK;
- unsigned long numqry_phystatusHT;
unsigned long received_bwtype[5]; //0: 20M, 1: funn40M, 2: upper20M, 3: lower20M, 4: duplicate
unsigned long txnperr;
unsigned long txnpdrop;
len += snprintf(page + len, count - len,
"TX VI priority ok int: %lu\n"
-// "TX VI priority error int: %lu\n"
"TX VO priority ok int: %lu\n"
-// "TX VO priority error int: %lu\n"
"TX BE priority ok int: %lu\n"
-// "TX BE priority error int: %lu\n"
"TX BK priority ok int: %lu\n"
-// "TX BK priority error int: %lu\n"
"TX MANAGE priority ok int: %lu\n"
-// "TX MANAGE priority error int: %lu\n"
"TX BEACON priority ok int: %lu\n"
"TX BEACON priority error int: %lu\n"
"TX CMDPKT priority ok int: %lu\n"
-// "TX high priority ok int: %lu\n"
-// "TX high priority failed error int: %lu\n"
-// "TX queue resume: %lu\n"
"TX queue stopped?: %d\n"
"TX fifo overflow: %lu\n"
-// "TX beacon: %lu\n"
-// "TX VI queue: %d\n"
-// "TX VO queue: %d\n"
-// "TX BE queue: %d\n"
-// "TX BK queue: %d\n"
-// "TX HW queue: %d\n"
-// "TX VI dropped: %lu\n"
-// "TX VO dropped: %lu\n"
-// "TX BE dropped: %lu\n"
-// "TX BK dropped: %lu\n"
"TX total data packets %lu\n"
"TX total data bytes :%lu\n",
-// "TX beacon aborted: %lu\n",
priv->stats.txviokint,
-// priv->stats.txvierr,
priv->stats.txvookint,
-// priv->stats.txvoerr,
priv->stats.txbeokint,
-// priv->stats.txbeerr,
priv->stats.txbkokint,
-// priv->stats.txbkerr,
priv->stats.txmanageokint,
-// priv->stats.txmanageerr,
priv->stats.txbeaconokint,
priv->stats.txbeaconerr,
priv->stats.txcmdpktokint,
-// priv->stats.txhpokint,
-// priv->stats.txhperr,
-// priv->stats.txresumed,
netif_queue_stopped(dev),
priv->stats.txoverflow,
-// priv->stats.txbeacon,
-// read_nic_byte(dev, TXFIFOCOUNT),
-// priv->stats.txvidrop,
-// priv->stats.txvodrop,
priv->ieee80211->stats.tx_packets,
- priv->ieee80211->stats.tx_bytes
-
-
-// priv->stats.txbedrop,
-// priv->stats.txbkdrop
- // priv->stats.txdatapkt
-// priv->stats.txbeaconerr
- );
+ priv->ieee80211->stats.tx_bytes);
*eof = 1;
return len;
rtl8190_process_cck_rxpathsel(priv,pprevious_stats);
- //
- // Check RSSI
- //
- priv->stats.num_process_phyinfo++;
-
// <2> Showed on UI for engineering
// hardware does not provide rssi information for each rf path in CCK
if(!pprevious_stats->bIsCCK && pprevious_stats->bPacketToSelf)
static u8 check_reg824 = 0;
static u32 reg824_bit9 = 0;
- priv->stats.numqry_phystatus++;
-
is_cck_rate = rx_hal_is_cck_rate(pdrvinfo);
// Record it for next packet processing
u8 tmp_pwdb;
char cck_adc_pwdb[4];
#endif
- priv->stats.numqry_phystatusCCK++;
#ifdef RTL8190P //Only 90P 2T4R need to check
if(priv->rf_type == RF_2T4R && DM_RxPathSelTable.Enable && bpacket_match_bssid)
}
else
{
- priv->stats.numqry_phystatusHT++;
//
// (1)Get RSSI for HT rate
//
}
#endif
- if(bpacket_match_bssid)
- {
- priv->stats.numpacket_matchbssid++;
- }
- if(bpacket_toself){
- priv->stats.numpacket_toself++;
- }
+
//
// Process PHY information for previous packet (RSSI/PWDB/EVM)
//
if(stats.bHwError) {
stats.bShift = false;
-
- if(pdesc->CRC32) {
- if (pdesc->Length <500)
- priv->stats.rxcrcerrmin++;
- else if (pdesc->Length >1000)
- priv->stats.rxcrcerrmax++;
- else
- priv->stats.rxcrcerrmid++;
- }
goto done;
} else {
prx_fwinfo_819x_pci pDrvInfo = NULL;