ARM: dts: k2g-evm: Add pinmuxing for UART0

Avoid depending on the bootloader or the ROM for configuring the pinmux by
explicitly setting the pinmux here.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 5bfd9e7845f2b080c1af9c08f8d8a1388d9713b7..692fcbb1434ab04506097a928613684c0ff73a3f 100644 (file)
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -27,6 +27,17 @@
 
 };
 
+&k2g_pinctrl {
+       uart0_pins: pinmux_uart0_pins {
+               pinctrl-single,pins = <
+                       K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* uart0_rxd.uart0_rxd */
+                       K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)      /* uart0_txd.uart0_txd */
+               >;
+       };
+};
+
 &uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;
        status = "okay";
 };