[PATCH] fbdev: More accurate sync range extrapolation
authorAntonino A. Daplas <adaplas@gmail.com>
Mon, 26 Jun 2006 07:26:29 +0000 (00:26 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Mon, 26 Jun 2006 16:58:29 +0000 (09:58 -0700)
The EDID block should specify the display's operating limits (vertical and
horizontal sync ranges, and maximum dot clock).  If not given by the EDID
block, the ranges are extrapolated from the modelist.  However, the
computation used is only a rough approximation, and the resulting values may
not reflect the actual capability of the display.  This problem is frequently
encountered when the EDID block has a single entry, the single mode entry will
fail validation.

To prevent this, calculate the values based on the same method used in
fb_validate_mode().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/video/fbmon.c

index fbbcb7156a349cb4bfdbf75179f1219fc7786121..87b0224d234731a529dc51690431f1ec63dcdabf 100644 (file)
@@ -605,6 +605,7 @@ static int fb_get_monitor_limits(unsigned char *edid, struct fb_monspecs *specs)
        block = edid + DETAILED_TIMING_DESCRIPTIONS_START;
 
        DPRINTK("      Monitor Operating Limits: ");
+
        for (i = 0; i < 4; i++, block += DETAILED_TIMING_DESCRIPTION_SIZE) {
                if (edid_is_limits_block(block)) {
                        specs->hfmin = H_MIN_RATE * 1000;
@@ -618,11 +619,12 @@ static int fb_get_monitor_limits(unsigned char *edid, struct fb_monspecs *specs)
                        break;
                }
        }
-       
+
        /* estimate monitor limits based on modes supported */
        if (retval) {
-               struct fb_videomode *modes;
+               struct fb_videomode *modes, *mode;
                int num_modes, i, hz, hscan, pixclock;
+               int vtotal, htotal;
 
                modes = fb_create_modedb(edid, &num_modes);
                if (!modes) {
@@ -632,20 +634,38 @@ static int fb_get_monitor_limits(unsigned char *edid, struct fb_monspecs *specs)
 
                retval = 0;
                for (i = 0; i < num_modes; i++) {
-                       hz = modes[i].refresh;
+                       mode = &modes[i];
                        pixclock = PICOS2KHZ(modes[i].pixclock) * 1000;
-                       hscan = (modes[i].yres * 105 * hz + 5000)/100;
+                       htotal = mode->xres + mode->right_margin + mode->hsync_len
+                               + mode->left_margin;
+                       vtotal = mode->yres + mode->lower_margin + mode->vsync_len
+                               + mode->upper_margin;
+
+                       if (mode->vmode & FB_VMODE_INTERLACED)
+                               vtotal /= 2;
+
+                       if (mode->vmode & FB_VMODE_DOUBLE)
+                               vtotal *= 2;
+
+                       hscan = (pixclock + htotal / 2) / htotal;
+                       hscan = (hscan + 500) / 1000 * 1000;
+                       hz = (hscan + vtotal / 2) / vtotal;
                        
                        if (specs->dclkmax == 0 || specs->dclkmax < pixclock)
                                specs->dclkmax = pixclock;
+
                        if (specs->dclkmin == 0 || specs->dclkmin > pixclock)
                                specs->dclkmin = pixclock;
+
                        if (specs->hfmax == 0 || specs->hfmax < hscan)
                                specs->hfmax = hscan;
+
                        if (specs->hfmin == 0 || specs->hfmin > hscan)
                                specs->hfmin = hscan;
+
                        if (specs->vfmax == 0 || specs->vfmax < hz)
                                specs->vfmax = hz;
+
                        if (specs->vfmin == 0 || specs->vfmin > hz)
                                specs->vfmin = hz;
                }