r6040: add a MAC operation timeout define

2048 is the usual value for busy-waiting on a register r/w, define it
as MAC_DEF_TIMEOUT and use it where it is appropriate.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c
index fa2959689d874aac65575bf263687c7c61ada055..9ffbf6e39b323ae051ea7a435dedecb9015ae050 100644 (file)
--- a/drivers/net/ethernet/rdc/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c
@@ -137,6 +137,8 @@
 #define MBCR_DEFAULT   0x012A  /* MAC Bus Control Register */
 #define MCAST_MAX      3       /* Max number multicast addresses to filter */
 
+#define MAC_DEF_TIMEOUT        2048    /* Default MAC read/write operation timeout */
+
 /* Descriptor status */
 #define DSC_OWNER_MAC  0x8000  /* MAC is the owner of this descriptor */
 #define DSC_RX_OK      0x4000  /* RX was successful */
@@ -204,7 +206,7 @@ static char version[] __devinitdata = DRV_NAME
 /* Read a word data from PHY Chip */
 static int r6040_phy_read(void __iomem *ioaddr, int phy_addr, int reg)
 {
-       int limit = 2048;
+       int limit = MAC_DEF_TIMEOUT;
        u16 cmd;
 
        iowrite16(MDIO_READ + reg + (phy_addr << 8), ioaddr + MMDIO);
@@ -222,7 +224,7 @@ static int r6040_phy_read(void __iomem *ioaddr, int phy_addr, int reg)
 static void r6040_phy_write(void __iomem *ioaddr,
                                        int phy_addr, int reg, u16 val)
 {
-       int limit = 2048;
+       int limit = MAC_DEF_TIMEOUT;
        u16 cmd;
 
        iowrite16(val, ioaddr + MMWD);
@@ -361,7 +363,7 @@ err_exit:
 static void r6040_reset_mac(struct r6040_private *lp)
 {
        void __iomem *ioaddr = lp->base;
-       int limit = 2048;
+       int limit = MAC_DEF_TIMEOUT;
        u16 cmd;
 
        iowrite16(MAC_RST, ioaddr + MCR1);