lpfc: fix IP Reset processing - wait for RDY before proceeding
authorJames Smart <james.smart@emulex.com>
Wed, 3 Sep 2014 16:57:08 +0000 (12:57 -0400)
committerChristoph Hellwig <hch@lst.de>
Tue, 16 Sep 2014 16:10:09 +0000 (09:10 -0700)
Fix IP Reset processing - wait for RDY before proceeding

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
drivers/scsi/lpfc/lpfc_init.c

index 7f54916c4f6232cfc8e1be463fc93e65ee583ac0..33a24fc0afece0d1542c1c45359aa8c6eff261f2 100644 (file)
@@ -7903,7 +7903,8 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
        LPFC_MBOXQ_t *mboxq;
        uint32_t rc = 0, if_type;
        uint32_t shdr_status, shdr_add_status;
-       uint32_t rdy_chk, num_resets = 0, reset_again = 0;
+       uint32_t rdy_chk;
+       uint32_t port_reset = 0;
        union lpfc_sli4_cfg_shdr *shdr;
        struct lpfc_register reg_data;
        uint16_t devid;
@@ -7943,9 +7944,42 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
                }
                break;
        case LPFC_SLI_INTF_IF_TYPE_2:
-               for (num_resets = 0;
-                    num_resets < MAX_IF_TYPE_2_RESETS;
-                    num_resets++) {
+wait:
+               /*
+                * Poll the Port Status Register and wait for RDY for
+                * up to 30 seconds. If the port doesn't respond, treat
+                * it as an error.
+                */
+               for (rdy_chk = 0; rdy_chk < 3000; rdy_chk++) {
+                       if (lpfc_readl(phba->sli4_hba.u.if_type2.
+                               STATUSregaddr, &reg_data.word0)) {
+                               rc = -ENODEV;
+                               goto out;
+                       }
+                       if (bf_get(lpfc_sliport_status_rdy, &reg_data))
+                               break;
+                       msleep(20);
+               }
+
+               if (!bf_get(lpfc_sliport_status_rdy, &reg_data)) {
+                       phba->work_status[0] = readl(
+                               phba->sli4_hba.u.if_type2.ERR1regaddr);
+                       phba->work_status[1] = readl(
+                               phba->sli4_hba.u.if_type2.ERR2regaddr);
+                       lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+                                       "2890 Port not ready, port status reg "
+                                       "0x%x error 1=0x%x, error 2=0x%x\n",
+                                       reg_data.word0,
+                                       phba->work_status[0],
+                                       phba->work_status[1]);
+                       rc = -ENODEV;
+                       goto out;
+               }
+
+               if (!port_reset) {
+                       /*
+                        * Reset the port now
+                        */
                        reg_data.word0 = 0;
                        bf_set(lpfc_sliport_ctrl_end, &reg_data,
                               LPFC_SLIPORT_LITTLE_ENDIAN);
@@ -7956,64 +7990,16 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
                        /* flush */
                        pci_read_config_word(phba->pcidev,
                                             PCI_DEVICE_ID, &devid);
-                       /*
-                        * Poll the Port Status Register and wait for RDY for
-                        * up to 10 seconds.  If the port doesn't respond, treat
-                        * it as an error.  If the port responds with RN, start
-                        * the loop again.
-                        */
-                       for (rdy_chk = 0; rdy_chk < 1000; rdy_chk++) {
-                               msleep(10);
-                               if (lpfc_readl(phba->sli4_hba.u.if_type2.
-                                             STATUSregaddr, &reg_data.word0)) {
-                                       rc = -ENODEV;
-                                       goto out;
-                               }
-                               if (bf_get(lpfc_sliport_status_rn, &reg_data))
-                                       reset_again++;
-                               if (bf_get(lpfc_sliport_status_rdy, &reg_data))
-                                       break;
-                       }
-
-                       /*
-                        * If the port responds to the init request with
-                        * reset needed, delay for a bit and restart the loop.
-                        */
-                       if (reset_again && (rdy_chk < 1000)) {
-                               msleep(10);
-                               reset_again = 0;
-                               continue;
-                       }
 
-                       /* Detect any port errors. */
-                       if ((bf_get(lpfc_sliport_status_err, &reg_data)) ||
-                           (rdy_chk >= 1000)) {
-                               phba->work_status[0] = readl(
-                                       phba->sli4_hba.u.if_type2.ERR1regaddr);
-                               phba->work_status[1] = readl(
-                                       phba->sli4_hba.u.if_type2.ERR2regaddr);
-                               lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-                                       "2890 Port error detected during port "
-                                       "reset(%d): wait_tmo:%d ms, "
-                                       "port status reg 0x%x, "
-                                       "error 1=0x%x, error 2=0x%x\n",
-                                       num_resets, rdy_chk*10,
-                                       reg_data.word0,
-                                       phba->work_status[0],
-                                       phba->work_status[1]);
-                               rc = -ENODEV;
-                       }
-
-                       /*
-                        * Terminate the outer loop provided the Port indicated
-                        * ready within 10 seconds.
-                        */
-                       if (rdy_chk < 1000)
-                               break;
+                       port_reset = 1;
+                       msleep(20);
+                       goto wait;
+               } else if (bf_get(lpfc_sliport_status_rn, &reg_data)) {
+                       rc = -ENODEV;
+                       goto out;
                }
-               /* delay driver action following IF_TYPE_2 function reset */
-               msleep(100);
                break;
+
        case LPFC_SLI_INTF_IF_TYPE_1:
        default:
                break;
@@ -8021,11 +8007,10 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 
 out:
        /* Catch the not-ready port failure after a port reset. */
-       if (num_resets >= MAX_IF_TYPE_2_RESETS) {
+       if (rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "3317 HBA not functional: IP Reset Failed "
-                               "after (%d) retries, try: "
-                               "echo fw_reset > board_mode\n", num_resets);
+                               "try: echo fw_reset > board_mode\n");
                rc = -ENODEV;
        }