ARM: dts: omap3-devkit8000: Add NAND DT node

Add the needed sections to enable nand support on
Devkit8000.

Add nand partitions information.

Signed-off-by: Anil Kumar <anilk4.v@gmail.com>
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>

diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index b4faddcb95d873a052bbf179239decc433accc23..54d3da72ecc9e455f80a6c21f761093a1edaeedf 100644 (file)
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -115,3 +115,55 @@
 &mcbsp5 {
        status = "disabled";
 };
+
+&gpmc {
+       ranges = <0 0 0x30000000 0x04>;       /* CS0: NAND */
+
+       nand@0,0 {
+               reg = <0 0 0>; /* CS0, offset 0 */
+               nand-bus-width = <16>;
+
+               gpmc,sync-clk = <0>;
+               gpmc,cs-on = <0>;
+               gpmc,cs-rd-off = <44>;
+               gpmc,cs-wr-off = <44>;
+               gpmc,adv-on = <6>;
+               gpmc,adv-rd-off = <34>;
+               gpmc,adv-wr-off = <44>;
+               gpmc,we-off = <40>;
+               gpmc,oe-off = <54>;
+               gpmc,access = <64>;
+               gpmc,rd-cycle = <82>;
+               gpmc,wr-cycle = <82>;
+               gpmc,wr-access = <40>;
+               gpmc,wr-data-mux-bus = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               x-loader@0 {
+                       label = "X-Loader";
+                       reg = <0 0x80000>;
+               };
+
+               bootloaders@80000 {
+                       label = "U-Boot";
+                       reg = <0x80000 0x1e0000>;
+               };
+
+               bootloaders_env@260000 {
+                       label = "U-Boot Env";
+                       reg = <0x260000 0x20000>;
+               };
+
+               kernel@280000 {
+                       label = "Kernel";
+                       reg = <0x280000 0x400000>;
+               };
+
+               filesystem@680000 {
+                       label = "File System";
+                       reg = <0x680000 0xf980000>;
+               };
+       };
+};