Renesas Electronics USBHS driver
Required properties:
- - compatible: Must contain one of the following:
+ - compatible: Must contain one or more of the following:
+
- "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device
- "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device
- "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device
- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
+ - "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device
+ - "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first followed
+ by the generic version.
+
- reg: Base address and length of the register for the USBHS
- interrupts: Interrupt specifier for the USBHS
- clocks: A list of phandle + clock specifier pairs
Example:
usbhs: usb@e6590000 {
- compatible = "renesas,usbhs-r8a7790";
+ compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
.compatible = "renesas,usbhs-r8a7795",
.data = (void *)USBHS_TYPE_RCAR_GEN2,
},
+ {
+ .compatible = "renesas,rcar-gen2-usbhs",
+ .data = (void *)USBHS_TYPE_RCAR_GEN2,
+ },
+ {
+ /* Gen3 is compatible with Gen2 */
+ .compatible = "renesas,rcar-gen3-usbhs",
+ .data = (void *)USBHS_TYPE_RCAR_GEN2,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, usbhs_of_match);