struct drm_device *dev = crtc->dev;
struct plane_state pstates[STAGE_MAX + 1];
const struct mdp5_cfg_hw *hw_cfg;
+ const struct drm_plane_state *pstate;
int cnt = 0, i;
DBG("%s: check", mdp5_crtc->name);
* and that we don't have conflicting mixer stages:
*/
hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg);
- drm_atomic_crtc_state_for_each_plane(plane, state) {
- struct drm_plane_state *pstate;
+ drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) {
if (cnt >= (hw_cfg->lm.nb_stages)) {
dev_err(dev->dev, "too many planes!\n");
return -EINVAL;
}
- pstate = state->state->plane_states[drm_plane_index(plane)];
- /* plane might not have changed, in which case take
- * current state:
- */
- if (!pstate)
- pstate = plane->state;
pstates[cnt].plane = plane;
pstates[cnt].state = to_mdp5_plane_state(pstate);
struct vc4_dev *vc4 = to_vc4_dev(dev);
struct drm_plane *plane;
unsigned long flags;
+ const struct drm_plane_state *plane_state;
u32 dlist_count = 0;
int ret;
if (hweight32(state->connector_mask) > 1)
return -EINVAL;
- drm_atomic_crtc_state_for_each_plane(plane, state) {
- struct drm_plane_state *plane_state =
- state->state->plane_states[drm_plane_index(plane)];
-
- /* plane might not have changed, in which case take
- * current state:
- */
- if (!plane_state)
- plane_state = plane->state;
-
+ drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, state)
dlist_count += vc4_plane_dlist_size(plane_state);
- }
dlist_count++; /* Account for SCALER_CTL0_END. */
struct drm_plane *vc4_plane_init(struct drm_device *dev,
enum drm_plane_type type);
u32 vc4_plane_write_dlist(struct drm_plane *plane, u32 __iomem *dlist);
-u32 vc4_plane_dlist_size(struct drm_plane_state *state);
+u32 vc4_plane_dlist_size(const struct drm_plane_state *state);
void vc4_plane_async_set_fb(struct drm_plane *plane,
struct drm_framebuffer *fb);
return vc4_state->dlist_count;
}
-u32 vc4_plane_dlist_size(struct drm_plane_state *state)
+u32 vc4_plane_dlist_size(const struct drm_plane_state *state)
{
- struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+ const struct vc4_plane_state *vc4_state =
+ container_of(state, typeof(*vc4_state), base);
return vc4_state->dlist_count;
}
return state->connector_states[index];
}
+/**
+ * __drm_atomic_get_current_plane_state - get current plane state
+ * @state: global atomic state object
+ * @plane: plane to grab
+ *
+ * This function returns the plane state for the given plane, either from
+ * @state, or if the plane isn't part of the atomic state update, from @plane.
+ * This is useful in atomic check callbacks, when drivers need to peek at, but
+ * not change, state of other planes, since it avoids threading an error code
+ * back up the call chain.
+ *
+ * WARNING:
+ *
+ * Note that this function is in general unsafe since it doesn't check for the
+ * required locking for access state structures. Drivers must ensure that it is
+ * save to access the returned state structure through other means. One commone
+ * example is when planes are fixed to a single CRTC, and the driver knows that
+ * the CRTC locks is held already. In that case holding the CRTC locks gives a
+ * read-lock on all planes connected to that CRTC. But if planes can be
+ * reassigned things get more tricky. In that case it's better to use
+ * drm_atomic_get_plane_state and wire up full error handling.
+ *
+ * Returns:
+ *
+ * Read-only pointer to the current plane state.
+ */
+static inline const struct drm_plane_state *
+__drm_atomic_get_current_plane_state(struct drm_atomic_state *state,
+ struct drm_plane *plane)
+{
+ if (state->plane_states[drm_plane_index(plane)])
+ return state->plane_states[drm_plane_index(plane)];
+
+ return plane->state;
+}
+
int __must_check
drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state,
struct drm_display_mode *mode);
* This iterates over the current state, useful (for example) when applying
* atomic state after it has been checked and swapped. To iterate over the
* planes which *will* be attached (for ->atomic_check()) see
- * drm_crtc_for_each_pending_plane()
+ * drm_crtc_for_each_pending_plane().
*/
#define drm_atomic_crtc_for_each_plane(plane, crtc) \
drm_for_each_plane_mask(plane, (crtc)->dev, (crtc)->state->plane_mask)
*
* Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
* attached if the specified state is applied. Useful during (for example)
- * ->atomic_check() operations, to validate the incoming state
+ * ->atomic_check() operations, to validate the incoming state.
*/
#define drm_atomic_crtc_state_for_each_plane(plane, crtc_state) \
drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask)
+/**
+ * drm_crtc_atomic_state_for_each_plane_state - iterate over attached planes in new state
+ * @plane: the loop cursor
+ * @plane_state: loop cursor for the plane's state, must be const
+ * @crtc_state: the incoming crtc-state
+ *
+ * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
+ * attached if the specified state is applied. Useful during (for example)
+ * ->atomic_check() operations, to validate the incoming state.
+ *
+ * Compared to just drm_atomic_crtc_state_for_each_plane() this also fills in a
+ * const plane_state. This is useful when a driver just wants to peek at other
+ * active planes on this crtc, but does not need to change it.
+ */
+#define drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, crtc_state) \
+ drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask) \
+ for_each_if ((plane_state = \
+ __drm_atomic_get_current_plane_state((crtc_state)->state, \
+ plane)))
+
/*
* drm_atomic_plane_disabling - check whether a plane is being disabled
* @plane: plane object
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff