[SCSI] qla2xxx: Appropriately log FCP priority data messages
authorMadhuranath Iyengar <madhuranath.iyengar@qlogic.com>
Fri, 23 Jul 2010 10:28:24 +0000 (15:28 +0500)
committerJames Bottomley <James.Bottomley@suse.de>
Wed, 28 Jul 2010 14:06:08 +0000 (09:06 -0500)
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
drivers/scsi/qla2xxx/qla_bsg.c
drivers/scsi/qla2xxx/qla_init.c
drivers/scsi/qla2xxx/qla_sup.c

index 20eaa1c42ae25e67284478121d69c2e1f237b52e..d551ae19d4e1c50f902d43dbba43a3cb58192ce0 100644 (file)
@@ -41,13 +41,28 @@ qla24xx_fcp_prio_cfg_valid(struct qla_fcp_prio_cfg *pri_cfg, uint8_t flag)
        int i, ret, num_valid;
        uint8_t *bcode;
        struct qla_fcp_prio_entry *pri_entry;
+       uint32_t *bcode_val_ptr, bcode_val;
 
        ret = 1;
        num_valid = 0;
        bcode = (uint8_t *)pri_cfg;
+       bcode_val_ptr = (uint32_t *)pri_cfg;
+       bcode_val = (uint32_t)(*bcode_val_ptr);
 
-       if (bcode[0x0] != 'H' || bcode[0x1] != 'Q' || bcode[0x2] != 'O' ||
-                       bcode[0x3] != 'S') {
+       if (bcode_val == 0xFFFFFFFF) {
+               /* No FCP Priority config data in flash */
+               DEBUG2(printk(KERN_INFO
+                   "%s: No FCP priority config data.\n",
+                   __func__));
+               return 0;
+       }
+
+       if (bcode[0] != 'H' || bcode[1] != 'Q' || bcode[2] != 'O' ||
+                       bcode[3] != 'S') {
+               /* Invalid FCP priority data header*/
+               DEBUG2(printk(KERN_ERR
+                   "%s: Invalid FCP Priority data header. bcode=0x%x\n",
+                   __func__, bcode_val));
                return 0;
        }
        if (flag != 1)
@@ -60,8 +75,18 @@ qla24xx_fcp_prio_cfg_valid(struct qla_fcp_prio_cfg *pri_cfg, uint8_t flag)
                pri_entry++;
        }
 
-       if (num_valid == 0)
+       if (num_valid == 0) {
+               /* No valid FCP priority data entries */
+               DEBUG2(printk(KERN_ERR
+                   "%s: No valid FCP Priority data entries.\n",
+                   __func__));
                ret = 0;
+       } else {
+               /* FCP priority data is valid */
+               DEBUG2(printk(KERN_INFO
+                   "%s: Valid FCP priority data. num entries = %d\n",
+                   __func__, num_valid));
+       }
 
        return ret;
 }
@@ -78,6 +103,11 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job)
 
        bsg_job->reply->reply_payload_rcv_len = 0;
 
+       if (!IS_QLA24XX_TYPE(ha) || !IS_QLA25XX(ha)) {
+               ret = -EINVAL;
+               goto exit_fcp_prio_cfg;
+       }
+
        if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
                test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
                test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
index 5bc3170703712da6561647dcefcc315c38ce1932..cea491bf0fc018c291179ce4edb77dbfbfe6207d 100644 (file)
@@ -566,11 +566,8 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
                }
        }
 
-       if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha)) {
-               if (qla24xx_read_fcp_prio_cfg(vha))
-                       qla_printk(KERN_ERR, ha,
-                       "Unable to read FCP priority data.\n");
-       }
+       if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha))
+               qla24xx_read_fcp_prio_cfg(vha);
 
        return (rval);
 }
index de92504d7585544ca372ef27eb57a1a97a1f98d0..3c5115f6073964c6bea644d0b7e04b63d0203219 100644 (file)
@@ -664,6 +664,11 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req = ha->req_q_map[0];
 
+       def = 0;
+       if (IS_QLA25XX(ha))
+               def = 1;
+       else if (IS_QLA81XX(ha))
+               def = 2;
        ha->flt_region_flt = flt_addr;
        wptr = (uint16_t *)req->ring;
        flt = (struct qla_flt_header *)req->ring;
@@ -691,6 +696,10 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
                goto no_flash_data;
        }
 
+       /* Assign FCP prio region since older FLT's may not have it */
+       ha->flt_region_fcp_prio = ha->flags.port0 ?
+           fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
+
        loc = locations[1];
        cnt = le16_to_cpu(flt->length) / sizeof(struct qla_flt_region);
        for ( ; cnt; cnt--, region++) {
@@ -773,13 +782,6 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
 no_flash_data:
        /* Use hardcoded defaults. */
        loc = locations[0];
-       def = 0;
-       if (IS_QLA24XX_TYPE(ha))
-               def = 0;
-       else if (IS_QLA25XX(ha))
-               def = 1;
-       else if (IS_QLA81XX(ha))
-               def = 2;
        ha->flt_region_fw = def_fw[def];
        ha->flt_region_boot = def_boot[def];
        ha->flt_region_vpd_nvram = def_vpd_nvram[def];
@@ -790,14 +792,13 @@ no_flash_data:
        ha->flt_region_fdt = def_fdt[def];
        ha->flt_region_npiv_conf = ha->flags.port0 ?
            def_npiv_conf0[def] : def_npiv_conf1[def];
-       ha->flt_region_fcp_prio = ha->flags.port0 ?
-           fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
 done:
        DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "
            "vpd_nvram=0x%x vpd=0x%x nvram=0x%x fdt=0x%x flt=0x%x "
-           "npiv=0x%x.\n", loc, ha->flt_region_boot, ha->flt_region_fw,
-           ha->flt_region_vpd_nvram, ha->flt_region_vpd, ha->flt_region_nvram,
-           ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_npiv_conf));
+           "npiv=0x%x. fcp_prio_cfg=0x%x\n", loc, ha->flt_region_boot,
+           ha->flt_region_fw, ha->flt_region_vpd_nvram, ha->flt_region_vpd,
+           ha->flt_region_nvram, ha->flt_region_fdt, ha->flt_region_flt,
+           ha->flt_region_npiv_conf, ha->flt_region_fcp_prio));
 }
 
 static void