The struct smp_request data structure has be fixed up for Linux consumption.
This probably should go to scsi/sas.h eventually.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
};
-/**
- * struct smp_request_header - This structure defines the contents of an SMP
- * Request header.
- *
- * For specific information on each of these individual fields please reference
- * the SAS specification.
- */
-struct smp_request_header {
- u8 smp_frame_type; /* byte 0 */
- u8 function; /* byte 1 */
- u8 allocated_response_length; /* byte 2 */
- u8 request_length; /* byte 3 */
-};
-
/**
* struct smp_response_header - This structure depicts the contents of the SAS
* SMP DISCOVER RESPONSE frame. For specific information on each of these
u8 response_length; /* byte 3 */
};
-/**
- * struct smp_request_general - This structure defines the contents of an SMP
- * Request that is comprised of the struct smp_request_header and a CRC.
- *
- * For specific information on each of these individual fields please reference
- * the SAS specification.
- */
-struct smp_request_general {
- u32 crc; /* bytes 4-7 */
-
-};
-
-/**
- * struct smp_request_phy_identifier - This structure defines the contents of
- * an SMP Request that is comprised of the struct smp_request_header and a phy
- * identifier. Examples: SMP_REQUEST_DISCOVER, SMP_REQUEST_REPORT_PHY_SATA.
- *
- * For specific information on each of these individual fields please reference
- * the SAS specification.
- */
-struct smp_request_phy_identifier {
- u32 reserved_byte4_7; /* bytes 4-7 */
-
- u32 ignore_zone_group:1; /* byte 8 */
- u32 reserved_byte8:7;
-
- u32 phy_identifier:8; /* byte 9 */
- u32 reserved_byte10:8; /* byte 10 */
- u32 reserved_byte11:8; /* byte 11 */
-
-};
-
-/**
- * struct smp_request_configure_route_information - This structure defines the
- * contents of an SMP Configure Route Information request.
- *
- * For specific information on each of these individual fields please reference
- * the SAS specification.
- */
-struct smp_request_configure_route_information {
- u32 expected_expander_change_count:16; /* bytes 4-5 */
- u32 expander_route_index_high:8;
- u32 expander_route_index:8; /* bytes 6-7 */
-
- u32 reserved_byte8:8; /* bytes 8 */
- u32 phy_identifier:8; /* bytes 9 */
- u32 reserved_byte_10_11:16; /* bytes 10-11 */
-
- u32 reserved_byte_12_bit_0_6:7;
- u32 disable_route_entry:1; /* byte 12 */
- u32 reserved_byte_13_15:24; /* bytes 13-15 */
-
- u32 routed_sas_address[2]; /* bytes 16-23 */
- u8 reserved_byte_24_39[16]; /* bytes 24-39 */
-
-};
-
-/**
- * struct smp_request_phy_control - This structure defines the contents of an
- * SMP Phy Controler request.
- *
- * For specific information on each of these individual fields please reference
- * the SAS specification.
- */
-struct smp_request_phy_control {
- u16 expected_expander_change_count; /* byte 4-5 */
-
- u16 reserved_byte_6_7; /* byte 6-7 */
- u8 reserved_byte_8; /* byte 8 */
-
- u8 phy_identifier; /* byte 9 */
- u8 phy_operation; /* byte 10 */
-
- u8 update_partial_pathway_timeout_value:1;
- u8 reserved_byte_11_bit_1_7:7; /* byte 11 */
-
- u8 reserved_byte_12_23[12]; /* byte 12-23 */
-
- u8 attached_device_name[8]; /* byte 24-31 */
-
- u8 reserved_byte_32_bit_3_0:4; /* byte 32 */
- u8 programmed_minimum_physical_link_rate:4;
-
- u8 reserved_byte_33_bit_3_0:4; /* byte 33 */
- u8 programmed_maximum_physical_link_rate:4;
-
- u16 reserved_byte_34_35; /* byte 34-35 */
-
- u8 partial_pathway_timeout_value:4;
- u8 reserved_byte_36_bit_4_7:4; /* byte 36 */
-
- u16 reserved_byte_37_38; /* byte 37-38 */
- u8 reserved_byte_39; /* byte 39 */
-
-};
-
-/**
- * struct smp_request_vendor_specific - This structure depicts the vendor
- * specific space for SMP request.
- *
- *
- */
- #define SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH 1016
-struct smp_request_vendor_specific {
- u8 request_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH];
-};
-
-/**
- * struct smp_request - This structure simply unionizes the existing request
- * structures into a common request type.
- *
- *
- */
-struct smp_request {
- struct smp_request_header header;
-
- union { /* bytes 4-N */
- struct smp_request_general report_general;
- struct smp_request_phy_identifier discover;
- struct smp_request_general report_manufacturer_information;
- struct smp_request_phy_identifier report_phy_sata;
- struct smp_request_phy_control phy_control;
- struct smp_request_phy_identifier report_phy_error_log;
- struct smp_request_phy_identifier report_route_information;
- struct smp_request_configure_route_information configure_route_information;
- struct smp_request_vendor_specific vendor_specific_request;
- } request;
-
-};
-
/**
* struct smp_response_report_general - This structure depicts the SMP Report
};
+#define SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH 1016
struct smp_response_vendor_specific {
u8 response_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH];
};
};
-/* SMP Request Functions */
-#define SMP_FUNCTION_REPORT_GENERAL 0x00
-#define SMP_FUNCTION_REPORT_MANUFACTURER_INFORMATION 0x01
-#define SMP_FUNCTION_DISCOVER 0x10
-#define SMP_FUNCTION_REPORT_PHY_ERROR_LOG 0x11
-#define SMP_FUNCTION_REPORT_PHY_SATA 0x12
-#define SMP_FUNCTION_REPORT_ROUTE_INFORMATION 0X13
-#define SMP_FUNCTION_CONFIGURE_ROUTE_INFORMATION 0X90
-#define SMP_FUNCTION_PHY_CONTROL 0x91
-#define SMP_FUNCTION_PHY_TEST 0x92
-
#define SMP_FRAME_TYPE_REQUEST 0x40
#define SMP_FRAME_TYPE_RESPONSE 0x41
}
}
-enum sci_status scic_io_request_construct(struct scic_sds_controller *scic,
- struct scic_sds_remote_device *sci_dev,
- u16 io_tag,
- void *user_io_request_object,
- struct scic_sds_request *sci_req,
- struct scic_sds_request **new_scic_io_request_handle)
+enum sci_status
+scic_io_request_construct(struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *sci_dev,
+ u16 io_tag,
+ void *user_req,
+ struct scic_sds_request *sci_req,
+ struct scic_sds_request **new_sci_req)
{
struct domain_device *dev = sci_dev_to_domain(sci_dev);
enum sci_status status = SCI_SUCCESS;
/* Build the common part of the request */
- scic_sds_general_request_construct(scic, sci_dev, io_tag,
- user_io_request_object, sci_req);
+ scic_sds_general_request_construct(scic,
+ sci_dev,
+ io_tag,
+ user_req,
+ sci_req);
- if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX)
+ if (sci_dev->rnc.remote_node_index ==
+ SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX)
return SCI_FAILURE_INVALID_REMOTE_DEVICE;
- if (dev->dev_type == SAS_END_DEV) {
+ if (dev->dev_type == SAS_END_DEV)
scic_sds_ssp_io_request_assign_buffers(sci_req);
- } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
+ else if ((dev->dev_type == SATA_DEV) ||
+ (dev->tproto & SAS_PROTOCOL_STP)) {
scic_sds_stp_request_assign_buffers(sci_req);
- memset(sci_req->command_buffer, 0, sizeof(struct host_to_dev_fis));
+ memset(sci_req->command_buffer,
+ 0,
+ sizeof(struct host_to_dev_fis));
} else if (dev_is_expander(dev)) {
scic_sds_smp_request_assign_buffers(sci_req);
- memset(sci_req->command_buffer, 0, sizeof(struct smp_request));
+ memset(sci_req->command_buffer, 0, sizeof(struct smp_req));
} else
status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;
if (status == SCI_SUCCESS) {
- memset(sci_req->task_context_buffer, 0,
- SCI_FIELD_OFFSET(struct scu_task_context, sgl_pair_ab));
- *new_scic_io_request_handle = sci_req;
+ memset(sci_req->task_context_buffer,
+ 0,
+ SCI_FIELD_OFFSET(struct scu_task_context, sgl_pair_ab));
+ *new_sci_req = sci_req;
}
return status;
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include "sas.h"
#include "intel_sas.h"
#include "sci_base_state_machine.h"
#include "scic_controller.h"
static void scu_smp_request_construct_task_context(
struct scic_sds_request *sci_req,
- struct smp_request *smp_request);
+ struct smp_req *smp_req);
/**
*
u32 scic_sds_smp_request_get_object_size(void)
{
return sizeof(struct scic_sds_request)
- + sizeof(struct smp_request)
+ + sizeof(struct smp_req)
+ sizeof(struct smp_response)
+ sizeof(struct scu_task_context)
+ SMP_CACHE_BYTES;
*/
#define scic_sds_smp_request_get_response_buffer(memory) \
(((char *)(scic_sds_smp_request_get_command_buffer(memory))) \
- + sizeof(struct smp_request))
+ + sizeof(struct smp_req))
/**
* scic_sds_smp_request_get_task_context_buffer() -
}
-/**
- * This method is called by the SCI user to build an SMP pass-through IO
- * request.
- * @scic_smp_request: This parameter specifies the handle to the io request
- * object to be built.
- * @passthru_cb: This parameter specifies the pointer to the callback structure
- * that contains the function pointers
- *
- * - The user must have previously called scic_io_request_construct() on the
- * supplied IO request. Indicate if the controller successfully built the IO
- * request.
- */
-
-/**
- * This method will fill in the SCU Task Context for a SMP request. The
+/*
+ * This function will fill in the SCU Task Context for a SMP request. The
* following important settings are utilized: -# task_type ==
* SCU_TASK_TYPE_SMP. This simply indicates that a normal request type
* (i.e. non-raw frame) is being utilized to perform task management. -#
* constructed.
*
*/
-static void scu_smp_request_construct_task_context(
- struct scic_sds_request *sds_request,
- struct smp_request *smp_request)
+static void
+scu_smp_request_construct_task_context(struct scic_sds_request *sci_req,
+ struct smp_req *smp_req)
{
dma_addr_t dma_addr;
- struct scic_sds_controller *controller;
+ struct scic_sds_controller *scic;
struct scic_sds_remote_device *sci_dev;
- struct scic_sds_port *target_port;
+ struct scic_sds_port *sci_port;
struct scu_task_context *task_context;
/* byte swap the smp request. */
- scic_word_copy_with_swap(sds_request->command_buffer,
- (u32 *)smp_request,
- sizeof(struct smp_request) / sizeof(u32));
+ scic_word_copy_with_swap(sci_req->command_buffer,
+ (u32 *)smp_req,
+ sizeof(struct smp_req) / sizeof(u32));
- task_context = scic_sds_request_get_task_context(sds_request);
+ task_context = scic_sds_request_get_task_context(sci_req);
- controller = scic_sds_request_get_controller(sds_request);
- sci_dev = scic_sds_request_get_device(sds_request);
- target_port = scic_sds_request_get_port(sds_request);
+ scic = scic_sds_request_get_controller(sci_req);
+ sci_dev = scic_sds_request_get_device(sci_req);
+ sci_port = scic_sds_request_get_port(sci_req);
/*
* Fill in the TC with the its required data
task_context->initiator_request = 1;
task_context->connection_rate = sci_dev->connection_rate;
task_context->protocol_engine_index =
- scic_sds_controller_get_protocol_engine_group(controller);
- task_context->logical_port_index =
- scic_sds_port_get_index(target_port);
+ scic_sds_controller_get_protocol_engine_group(scic);
+ task_context->logical_port_index = scic_sds_port_get_index(sci_port);
task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP;
task_context->abort = 0;
task_context->valid = SCU_TASK_CONTEXT_VALID;
task_context->address_modifier = 0;
/* 10h */
- task_context->ssp_command_iu_length =
- smp_request->header.request_length;
+ task_context->ssp_command_iu_length = smp_req->req_len;
/* 14h */
task_context->transfer_length_bytes = 0;
* since commandIU has been build by framework at this point, we just
* copy the frist DWord from command IU to this location. */
memcpy((void *)(&task_context->type.smp),
- sds_request->command_buffer,
+ sci_req->command_buffer,
sizeof(u32));
/*
*/
task_context->task_phase = 0;
- if (sds_request->was_tag_assigned_by_user) {
+ if (sci_req->was_tag_assigned_by_user) {
/*
* Build the task context now since we have already read
* the data
*/
- sds_request->post_context =
+ sci_req->post_context =
(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
- (scic_sds_controller_get_protocol_engine_group(
- controller) <<
+ (scic_sds_controller_get_protocol_engine_group(scic) <<
SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
- (scic_sds_port_get_index(target_port) <<
+ (scic_sds_port_get_index(sci_port) <<
SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) |
- scic_sds_io_tag_get_index(sds_request->io_tag));
+ scic_sds_io_tag_get_index(sci_req->io_tag));
} else {
/*
* Build the task context now since we have already read
* I/O tag index is not assigned because we have to wait
* until we get a TCi.
*/
- sds_request->post_context =
+ sci_req->post_context =
(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
- (scic_sds_controller_get_protocol_engine_group(
- controller) <<
+ (scic_sds_controller_get_protocol_engine_group(scic) <<
SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
- (scic_sds_port_get_index(target_port) <<
+ (scic_sds_port_get_index(sci_port) <<
SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT));
}
* Copy the physical address for the command buffer to the SCU Task
* Context command buffer should not contain command header.
*/
- dma_addr = scic_io_request_get_dma_addr(sds_request,
+ dma_addr = scic_io_request_get_dma_addr(sci_req,
(char *)
- (sds_request->command_buffer) +
+ (sci_req->command_buffer) +
sizeof(u32));
task_context->command_iu_upper = upper_32_bits(dma_addr);
*/
enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req)
{
- struct smp_request *smp_req = kmalloc(sizeof(*smp_req), GFP_KERNEL);
+ struct smp_req *smp_req = kmalloc(sizeof(*smp_req), GFP_KERNEL);
if (!smp_req)
return SCI_FAILURE_INSUFFICIENT_RESOURCES;
* Look at the SMP requests' header fields; for certain SAS 1.x SMP
* functions under SAS 2.0, a zero request length really indicates
* a non-zero default length. */
- if (smp_req->header.request_length == 0) {
- switch (smp_req->header.function) {
- case SMP_FUNCTION_DISCOVER:
- case SMP_FUNCTION_REPORT_PHY_ERROR_LOG:
- case SMP_FUNCTION_REPORT_PHY_SATA:
- case SMP_FUNCTION_REPORT_ROUTE_INFORMATION:
- smp_req->header.request_length = 2;
+ if (smp_req->req_len == 0) {
+ switch (smp_req->func) {
+ case SMP_DISCOVER:
+ case SMP_REPORT_PHY_ERR_LOG:
+ case SMP_REPORT_PHY_SATA:
+ case SMP_REPORT_ROUTE_INFO:
+ smp_req->req_len = 2;
break;
- case SMP_FUNCTION_CONFIGURE_ROUTE_INFORMATION:
- case SMP_FUNCTION_PHY_CONTROL:
- case SMP_FUNCTION_PHY_TEST:
- smp_req->header.request_length = 9;
+ case SMP_CONF_ROUTE_INFO:
+ case SMP_PHY_CONTROL:
+ case SMP_PHY_TEST_FUNCTION:
+ smp_req->req_len = 9;
break;
/* Default - zero is a valid default for 2.0. */
}
#include "request.h"
#include "sata.h"
#include "scu_completion_codes.h"
-#include "core/scic_sds_request.h"
+#include "scic_sds_request.h"
+#include "sas.h"
static enum sci_status isci_request_ssp_request_construct(
struct isci_request *request)
return status;
}
-/**
- * isci_smp_request_build() - This function builds the smp request object.
- * @isci_host: This parameter specifies the ISCI host object
- * @request: This parameter points to the isci_request object allocated in the
+/*
+ * isci_smp_request_build() - This function builds the smp request.
+ * @ireq: This parameter points to the isci_request allocated in the
* request construct function.
- * @sci_device: This parameter is the handle for the sci core's remote device
- * object that is the destination for this request.
*
* SCI_SUCCESS on successfull completion, or specific failure code.
*/
-static enum sci_status isci_smp_request_build(
- struct isci_request *request)
+static enum sci_status isci_smp_request_build(struct isci_request *ireq)
{
enum sci_status status = SCI_FAILURE;
- struct sas_task *task = isci_request_access_task(request);
+ struct sas_task *task = isci_request_access_task(ireq);
+ struct scic_sds_request *sci_req = ireq->sci_request_handle;
+ void *cmd_iu = sci_req->command_buffer;
- void *command_iu_address =
- scic_io_request_get_command_iu_address(
- request->sci_request_handle
- );
+ dev_dbg(&ireq->isci_host->pdev->dev,
+ "%s: request = %p\n", __func__, ireq);
- dev_dbg(&request->isci_host->pdev->dev,
- "%s: request = %p\n",
- __func__,
- request);
- dev_dbg(&request->isci_host->pdev->dev,
+ dev_dbg(&ireq->isci_host->pdev->dev,
"%s: smp_req len = %d\n",
__func__,
task->smp_task.smp_req.length);
/* copy the smp_command to the address; */
sg_copy_to_buffer(&task->smp_task.smp_req, 1,
- (char *)command_iu_address,
- sizeof(struct smp_request)
- );
+ (char *)cmd_iu,
+ sizeof(struct smp_req));
- status = scic_io_request_construct_smp(request->sci_request_handle);
+ status = scic_io_request_construct_smp(sci_req);
if (status != SCI_SUCCESS)
- dev_warn(&request->isci_host->pdev->dev,
- "%s: scic_io_request_construct_smp failed with "
- "status = %d\n",
+ dev_warn(&ireq->isci_host->pdev->dev,
+ "%s: failed with status = %d\n",
__func__,
status);
sg_copy_from_buffer(
&task->smp_task.smp_resp, 1,
command_iu_address
- + sizeof(struct smp_request),
- sizeof(struct smp_resp)
- );
+ + sizeof(struct smp_req),
+ sizeof(struct smp_resp));
} else if (completion_status
== SCI_IO_SUCCESS_IO_DONE_EARLY) {
#ifndef _SCI_SAS_H_
#define _SCI_SAS_H_
+
+#include <linux/kernel.h>
+
/*
* SATA FIS Types These constants depict the various SATA FIS types devined in
* the serial ATA specification.
u8 _r_c[12];
} __packed;
+
+/*
+ * struct smp_req_phy_id - This structure defines the contents of
+ * an SMP Request that is comprised of the struct smp_request_header and a
+ * phy identifier.
+ * Examples: SMP_REQUEST_DISCOVER, SMP_REQUEST_REPORT_PHY_SATA.
+ *
+ * For specific information on each of these individual fields please reference
+ * the SAS specification.
+ */
+struct smp_req_phy_id {
+ u8 _r_a[4]; /* bytes 4-7 */
+
+ u8 ign_zone_grp:1; /* byte 8 */
+ u8 _r_b:7;
+
+ u8 phy_id; /* byte 9 */
+ u8 _r_c; /* byte 10 */
+ u8 _r_d; /* byte 11 */
+} __packed;
+
+/*
+ * struct smp_req_config_route_info - This structure defines the
+ * contents of an SMP Configure Route Information request.
+ *
+ * For specific information on each of these individual fields please reference
+ * the SAS specification.
+ */
+struct smp_req_conf_rtinfo {
+ u16 exp_change_cnt; /* bytes 4-5 */
+ u8 exp_rt_idx_hi; /* byte 6 */
+ u8 exp_rt_idx; /* byte 7 */
+
+ u8 _r_a; /* byte 8 */
+ u8 phy_id; /* byte 9 */
+ u16 _r_b; /* bytes 10-11 */
+
+ u8 _r_c:7; /* byte 12 */
+ u8 dis_rt_entry:1;
+ u8 _r_d[3]; /* bytes 13-15 */
+
+ u8 rt_sas_addr[8]; /* bytes 16-23 */
+ u8 _r_e[16]; /* bytes 24-39 */
+} __packed;
+
+/*
+ * struct smp_req_phycntl - This structure defines the contents of an
+ * SMP Phy Controller request.
+ *
+ * For specific information on each of these individual fields please reference
+ * the SAS specification.
+ */
+struct smp_req_phycntl {
+ u16 exp_change_cnt; /* byte 4-5 */
+
+ u8 _r_a[3]; /* bytes 6-8 */
+
+ u8 phy_id; /* byte 9 */
+ u8 phy_op; /* byte 10 */
+
+ u8 upd_pathway:1; /* byte 11 */
+ u8 _r_b:7;
+
+ u8 _r_c[12]; /* byte 12-23 */
+
+ u8 att_dev_name[8]; /* byte 24-31 */
+
+ u8 _r_d:4; /* byte 32 */
+ u8 min_linkrate:4;
+
+ u8 _r_e:4; /* byte 33 */
+ u8 max_linkrate:4;
+
+ u8 _r_f[2]; /* byte 34-35 */
+
+ u8 pathway:4; /* byte 36 */
+ u8 _r_g:4;
+
+ u8 _r_h[3]; /* bytes 37-39 */
+} __packed;
+
+#define SMP_REQ_VENDOR_SPECIFIC_MAX_LEN 1016
+
+/*
+ * struct smp_req - This structure simply unionizes the existing request
+ * structures into a common request type.
+ *
+ * XXX: This data structure may need to go to scsi/sas.h
+ */
+struct smp_req {
+ u8 type; /* byte 0 */
+ u8 func; /* byte 1 */
+ u8 alloc_resp_len; /* byte 2 */
+ u8 req_len; /* byte 3 */
+
+ union { /* bytes 4-N */
+ u32 smp_req_gen;
+ struct smp_req_phy_id phy_id;
+ struct smp_req_phycntl phy_cntl;
+ struct smp_req_conf_rtinfo conf_rt_info;
+ u8 vendor[SMP_REQ_VENDOR_SPECIFIC_MAX_LEN];
+ };
+} __packed;
+
#endif
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff