cciss: Add cciss_allow_hpsa module parameter
authorStephen M. Cameron <scameron@beardog.cce.hp.com>
Tue, 13 Oct 2009 07:18:22 +0000 (09:18 +0200)
committerJens Axboe <jens.axboe@oracle.com>
Tue, 13 Oct 2009 07:18:22 +0000 (09:18 +0200)
Add cciss_allow_hpsa module parameter.  This parameter causes
the cciss driver to ignore any Smart Array devices known to be
supported by the hpsa driver.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
drivers/block/cciss.c

index 52f53c134c5b1eada31dbb36f1d60978d8f25427..6399e5090df4d59175063ae1b158f7b77e8a41e3 100644 (file)
@@ -68,6 +68,12 @@ MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
 MODULE_VERSION("3.6.20");
 MODULE_LICENSE("GPL");
 
+static int cciss_allow_hpsa;
+module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(cciss_allow_hpsa,
+       "Prevent cciss driver from accessing hardware known to be "
+       " supported by the hpsa driver");
+
 #include "cciss_cmd.h"
 #include "cciss.h"
 #include <linux/cciss_ioctl.h>
@@ -101,8 +107,6 @@ static const struct pci_device_id cciss_pci_device_id[] = {
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3249},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x324A},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x324B},
-       {PCI_VENDOR_ID_HP,     PCI_ANY_ID,      PCI_ANY_ID, PCI_ANY_ID,
-               PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
        {0,}
 };
 
@@ -123,8 +127,6 @@ static struct board_type products[] = {
        {0x409D0E11, "Smart Array 6400 EM", &SA5_access},
        {0x40910E11, "Smart Array 6i", &SA5_access},
        {0x3225103C, "Smart Array P600", &SA5_access},
-       {0x3223103C, "Smart Array P800", &SA5_access},
-       {0x3234103C, "Smart Array P400", &SA5_access},
        {0x3235103C, "Smart Array P400i", &SA5_access},
        {0x3211103C, "Smart Array E200i", &SA5_access},
        {0x3212103C, "Smart Array E200", &SA5_access},
@@ -132,6 +134,10 @@ static struct board_type products[] = {
        {0x3214103C, "Smart Array E200i", &SA5_access},
        {0x3215103C, "Smart Array E200i", &SA5_access},
        {0x3237103C, "Smart Array E500", &SA5_access},
+/* controllers below this line are also supported by the hpsa driver. */
+#define HPSA_BOUNDARY 0x3223103C
+       {0x3223103C, "Smart Array P800", &SA5_access},
+       {0x3234103C, "Smart Array P400", &SA5_access},
        {0x323D103C, "Smart Array P700m", &SA5_access},
        {0x3241103C, "Smart Array P212", &SA5_access},
        {0x3243103C, "Smart Array P410", &SA5_access},
@@ -140,7 +146,6 @@ static struct board_type products[] = {
        {0x3249103C, "Smart Array P812", &SA5_access},
        {0x324A103C, "Smart Array P712m", &SA5_access},
        {0x324B103C, "Smart Array P711m", &SA5_access},
-       {0xFFFF103C, "Unknown Smart Array", &SA5_access},
 };
 
 /* How long to wait (in milliseconds) for board to go into simple mode */
@@ -3754,7 +3759,27 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
        __u64 cfg_offset;
        __u32 cfg_base_addr;
        __u64 cfg_base_addr_index;
-       int i, err;
+       int i, prod_index, err;
+
+       subsystem_vendor_id = pdev->subsystem_vendor;
+       subsystem_device_id = pdev->subsystem_device;
+       board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
+                   subsystem_vendor_id);
+
+       for (i = 0; i < ARRAY_SIZE(products); i++) {
+               /* Stand aside for hpsa driver on request */
+               if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY)
+                       return -ENODEV;
+               if (board_id == products[i].board_id)
+                       break;
+       }
+       prod_index = i;
+       if (prod_index == ARRAY_SIZE(products)) {
+               dev_warn(&pdev->dev,
+                       "unrecognized board ID: 0x%08lx, ignoring.\n",
+                       (unsigned long) board_id);
+               return -ENODEV;
+       }
 
        /* check to see if controller has been disabled */
        /* BEFORE trying to enable it */
@@ -3778,11 +3803,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
                return err;
        }
 
-       subsystem_vendor_id = pdev->subsystem_vendor;
-       subsystem_device_id = pdev->subsystem_device;
-       board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
-                   subsystem_vendor_id);
-
 #ifdef CCISS_DEBUG
        printk("command = %x\n", command);
        printk("irq = %x\n", pdev->irq);
@@ -3868,14 +3888,9 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
         * leave a little room for ioctl calls.
         */
        c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
-       for (i = 0; i < ARRAY_SIZE(products); i++) {
-               if (board_id == products[i].board_id) {
-                       c->product_name = products[i].product_name;
-                       c->access = *(products[i].access);
-                       c->nr_cmds = c->max_commands - 4;
-                       break;
-               }
-       }
+       c->product_name = products[prod_index].product_name;
+       c->access = *(products[prod_index].access);
+       c->nr_cmds = c->max_commands - 4;
        if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
            (readb(&c->cfgtable->Signature[1]) != 'I') ||
            (readb(&c->cfgtable->Signature[2]) != 'S') ||
@@ -3884,27 +3899,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
                err = -ENODEV;
                goto err_out_free_res;
        }
-       /* We didn't find the controller in our list. We know the
-        * signature is valid. If it's an HP device let's try to
-        * bind to the device and fire it up. Otherwise we bail.
-        */
-       if (i == ARRAY_SIZE(products)) {
-               if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
-                       c->product_name = products[i-1].product_name;
-                       c->access = *(products[i-1].access);
-                       c->nr_cmds = c->max_commands - 4;
-                       printk(KERN_WARNING "cciss: This is an unknown "
-                               "Smart Array controller.\n"
-                               "cciss: Please update to the latest driver "
-                               "available from www.hp.com.\n");
-               } else {
-                       printk(KERN_WARNING "cciss: Sorry, I don't know how"
-                               " to access the Smart Array controller %08lx\n"
-                                       , (unsigned long)board_id);
-                       err = -ENODEV;
-                       goto err_out_free_res;
-               }
-       }
 #ifdef CONFIG_X86
        {
                /* Need to enable prefetch in the SCSI core for 6400 in x86 */