skge: set mac address bonding fix
authorStephen Hemminger <shemminger@linux-foundation.org>
Mon, 12 Mar 2007 22:16:26 +0000 (15:16 -0700)
committerJeff Garzik <jeff@garzik.org>
Thu, 15 Mar 2007 14:44:32 +0000 (10:44 -0400)
When bonding does fail over it calls set_mac_address.  When this happens
as the result of another port going down, the phy_mutex that is common to
both ports is held, so it deadlocks. Setting the address doesn't need to do
anything that needs the phy_mutex, it already has the RTNL to protect against
other admin actions.

This change just disables the receiver to avoid any hardware confusion
while address is changing.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/skge.c

index eea75a401b0c8887ef08c430e7ce5e27c42adab6..8fecf1b817f702d022733c248e40d57b11c992d6 100644 (file)
@@ -3275,24 +3275,30 @@ static int skge_set_mac_address(struct net_device *dev, void *p)
        struct skge_hw *hw = skge->hw;
        unsigned port = skge->port;
        const struct sockaddr *addr = p;
+       u16 ctrl;
 
        if (!is_valid_ether_addr(addr->sa_data))
                return -EADDRNOTAVAIL;
 
-       mutex_lock(&hw->phy_mutex);
        memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
-       memcpy_toio(hw->regs + B2_MAC_1 + port*8,
-                   dev->dev_addr, ETH_ALEN);
-       memcpy_toio(hw->regs + B2_MAC_2 + port*8,
-                   dev->dev_addr, ETH_ALEN);
 
-       if (hw->chip_id == CHIP_ID_GENESIS)
-               xm_outaddr(hw, port, XM_SA, dev->dev_addr);
-       else {
-               gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
-               gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
+       /* disable Rx */
+       ctrl = gma_read16(hw, port, GM_GP_CTRL);
+       gma_write16(hw, port, GM_GP_CTRL, ctrl & ~GM_GPCR_RX_ENA);
+
+       memcpy_toio(hw->regs + B2_MAC_1 + port*8, dev->dev_addr, ETH_ALEN);
+       memcpy_toio(hw->regs + B2_MAC_2 + port*8, dev->dev_addr, ETH_ALEN);
+
+       if (netif_running(dev)) {
+               if (hw->chip_id == CHIP_ID_GENESIS)
+                       xm_outaddr(hw, port, XM_SA, dev->dev_addr);
+               else {
+                       gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
+                       gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
+               }
        }
-       mutex_unlock(&hw->phy_mutex);
+
+       gma_write16(hw, port, GM_GP_CTRL, ctrl);
 
        return 0;
 }