davinci: Add MMC/SD support for DA830/OMAP-L137 EVM
authorDavid A. Griego <dgriego@mvista.com>
Wed, 16 Sep 2009 01:10:20 +0000 (18:10 -0700)
committerKevin Hilman <khilman@deeprootsystems.com>
Wed, 25 Nov 2009 18:21:22 +0000 (10:21 -0800)
Add pinmux settings, etc. to enable the MMC/SC hardware.

Signed-off-by: David A. Griego <dgriego@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
arch/arm/mach-davinci/board-da830-evm.c

index 39711c123dd68da3a6a85f8aab5ae3acef32e0bf..fe86afa7ea2e8dbe3abfa58e266eca638e12d73b 100644 (file)
@@ -23,6 +23,7 @@
 #include <mach/irqs.h>
 #include <mach/cp_intc.h>
 #include <mach/mux.h>
+#include <mach/gpio.h>
 #include <mach/da8xx.h>
 #include <mach/asp.h>
 
@@ -83,6 +84,57 @@ static struct snd_platform_data da830_evm_snd_data = {
        .rxnumevt       = 1,
 };
 
+/*
+ * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
+ */
+static const short da830_evm_mmc_sd_pins[] = {
+       DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
+       DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
+       DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
+       DA830_MMCSD_CMD,   DA830_GPIO2_1,     DA830_GPIO2_2,
+       -1
+};
+
+#define DA830_MMCSD_WP_PIN             GPIO_TO_PIN(2, 1)
+
+static int da830_evm_mmc_get_ro(int index)
+{
+       return gpio_get_value(DA830_MMCSD_WP_PIN);
+}
+
+static struct davinci_mmc_config da830_evm_mmc_config = {
+       .get_ro                 = da830_evm_mmc_get_ro,
+       .wires                  = 4,
+       .version                = MMC_CTLR_VERSION_2,
+};
+
+static inline void da830_evm_init_mmc(void)
+{
+       int ret;
+
+       ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins);
+       if (ret) {
+               pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n",
+                               ret);
+               return;
+       }
+
+       ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP");
+       if (ret) {
+               pr_warning("da830_evm_init: can not open GPIO %d\n",
+                          DA830_MMCSD_WP_PIN);
+               return;
+       }
+       gpio_direction_input(DA830_MMCSD_WP_PIN);
+
+       ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
+       if (ret) {
+               pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",
+                               ret);
+               gpio_free(DA830_MMCSD_WP_PIN);
+       }
+}
+
 static __init void da830_evm_init(void)
 {
        struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -132,6 +184,8 @@ static __init void da830_evm_init(void)
                                ret);
 
        da8xx_register_mcasp(1, &da830_evm_snd_data);
+
+       da830_evm_init_mmc();
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE