mfd: 88pm860x: Device tree support
authorHaojian Zhuang <haojian.zhuang@gmail.com>
Fri, 21 Sep 2012 10:06:52 +0000 (18:06 +0800)
committerSamuel Ortiz <sameo@linux.intel.com>
Tue, 2 Oct 2012 09:43:13 +0000 (11:43 +0200)
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Documentation/devicetree/bindings/mfd/88pm860x.txt [new file with mode: 0644]
Documentation/devicetree/bindings/regulator/88pm860x.txt [new file with mode: 0644]
Documentation/devicetree/bindings/video/backlight/88pm860x.txt [new file with mode: 0644]
drivers/input/touchscreen/88pm860x-ts.c
drivers/leds/leds-88pm860x.c
drivers/mfd/88pm860x-core.c
drivers/regulator/88pm8607.c
drivers/rtc/rtc-88pm860x.c
drivers/video/backlight/88pm860x_bl.c
include/linux/mfd/88pm860x.h

diff --git a/Documentation/devicetree/bindings/mfd/88pm860x.txt b/Documentation/devicetree/bindings/mfd/88pm860x.txt
new file mode 100644 (file)
index 0000000..63f3ee3
--- /dev/null
@@ -0,0 +1,85 @@
+* Marvell 88PM860x Power Management IC
+
+Required parent device properties:
+- compatible : "marvell,88pm860x"
+- reg : the I2C slave address for the 88pm860x chip
+- interrupts : IRQ line for the 88pm860x chip
+- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain)
+- #interrupt-cells : should be 1.
+               - The cell is the 88pm860x local IRQ number
+
+Optional parent device properties:
+- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read
+- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. <reg> stores the I2C address
+                               of one chip, and this property stores the I2C address of
+                               another chip.
+
+88pm860x consists of a large and varied group of sub-devices:
+
+Device                  Supply Names    Description
+------                  ------------    -----------
+88pm860x-onkey         :               : On key
+88pm860x-rtc           :               : RTC
+88pm8607               :               : Regulators
+88pm860x-backlight     :               : Backlight
+88pm860x-led           :               : Led
+88pm860x-touch         :               : Touchscreen
+
+Example:
+
+       pmic: 88pm860x@34 {
+               compatible = "marvell,88pm860x";
+               reg = <0x34>;
+               interrupts = <4>;
+               interrupt-parent = <&intc>;
+               interrupt-controller;
+               #interrupt-cells = <1>;
+
+               marvell,88pm860x-irq-read-clr;
+               marvell,88pm860x-slave-addr = <0x11>;
+
+               regulators {
+                       BUCK1 {
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+                       LDO1 {
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <2800000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+               };
+               rtc {
+                       marvell,88pm860x-vrtc = <1>;
+               };
+               touch {
+                       marvell,88pm860x-gpadc-prebias = <1>;
+                       marvell,88pm860x-gpadc-slot-cycle = <1>;
+                       marvell,88pm860x-tsi-prebias = <6>;
+                       marvell,88pm860x-pen-prebias = <16>;
+                       marvell,88pm860x-pen-prechg = <2>;
+                       marvell,88pm860x-resistor-X = <300>;
+               };
+               backlights {
+                       backlight-0 {
+                               marvell,88pm860x-iset = <4>;
+                               marvell,88pm860x-pwm = <3>;
+                       };
+                       backlight-2 {
+                       };
+               };
+               leds {
+                       led0-red {
+                               marvell,88pm860x-iset = <12>;
+                       };
+                       led0-green {
+                               marvell,88pm860x-iset = <12>;
+                       };
+                       led0-blue {
+                               marvell,88pm860x-iset = <12>;
+                       };
+               };
+       };
diff --git a/Documentation/devicetree/bindings/regulator/88pm860x.txt b/Documentation/devicetree/bindings/regulator/88pm860x.txt
new file mode 100644 (file)
index 0000000..1267b3e
--- /dev/null
@@ -0,0 +1,30 @@
+Marvell 88PM860x regulator
+
+Required properties:
+- compatible: "marvell,88pm860x"
+- reg: I2C slave address
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the regulator-compatible
+  property, with valid values listed below.
+
+Example:
+
+       pmic: 88pm860x@34 {
+               compatible = "marvell,88pm860x";
+               reg = <0x34>;
+
+               regulators {
+                       BUCK1 {
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+                       BUCK3 {
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <3000000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+               };
+       };
diff --git a/Documentation/devicetree/bindings/video/backlight/88pm860x.txt b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt
new file mode 100644 (file)
index 0000000..261df27
--- /dev/null
@@ -0,0 +1,15 @@
+88pm860x-backlight bindings
+
+Optional properties:
+  - marvell,88pm860x-iset: Current supplies on backlight device.
+  - marvell,88pm860x-pwm: PWM frequency on backlight device.
+
+Example:
+
+       backlights {
+               backlight-0 {
+                       marvell,88pm860x-iset = <4>;
+                       marvell,88pm860x-pwm = <3>;
+               };
+               backlight-2 {
+               };
index 05f30b73c3c385efc2906185877ecee28e30bc9f..4f81e6eb74b6782c18c79c75d423031a02b75016 100644 (file)
@@ -10,6 +10,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
@@ -113,14 +114,31 @@ static void pm860x_touch_close(struct input_dev *dev)
        pm860x_set_bits(touch->i2c, MEAS_EN3, data, 0);
 }
 
+#ifdef CONFIG_OF
+static int __devinit pm860x_touch_dt_init(struct platform_device *pdev,
+                                         int *res_x)
+{
+       struct device_node *np = pdev->dev.parent->of_node;
+       if (!np)
+               return -ENODEV;
+       np = of_find_node_by_name(np, "touch");
+       if (!np) {
+               dev_err(&pdev->dev, "Can't find touch node\n");
+               return -EINVAL;
+       }
+       of_property_read_u32(np, "marvell,88pm860x-resistor-X", res_x);
+       return 0;
+}
+#else
+#define pm860x_touch_dt_init(x, y)     (-1)
+#endif
+
 static int __devinit pm860x_touch_probe(struct platform_device *pdev)
 {
        struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
-       struct pm860x_platform_data *pm860x_pdata =             \
-                               pdev->dev.parent->platform_data;
-       struct pm860x_touch_pdata *pdata = NULL;
+       struct pm860x_touch_pdata *pdata = pdev->dev.platform_data;
        struct pm860x_touch *touch;
-       int irq, ret;
+       int irq, ret, res_x = 0;
 
        irq = platform_get_irq(pdev, 0);
        if (irq < 0) {
@@ -128,15 +146,13 @@ static int __devinit pm860x_touch_probe(struct platform_device *pdev)
                return -EINVAL;
        }
 
-       if (!pm860x_pdata) {
-               dev_err(&pdev->dev, "platform data is missing\n");
-               return -EINVAL;
-       }
-
-       pdata = pm860x_pdata->touch;
-       if (!pdata) {
-               dev_err(&pdev->dev, "touchscreen data is missing\n");
-               return -EINVAL;
+       if (pm860x_touch_dt_init(pdev, &res_x)) {
+               if (pdata)
+                       res_x = pdata->res_x;
+               else {
+                       dev_err(&pdev->dev, "failed to get platform data\n");
+                       return -EINVAL;
+               }
        }
 
        touch = kzalloc(sizeof(struct pm860x_touch), GFP_KERNEL);
@@ -159,8 +175,8 @@ static int __devinit pm860x_touch_probe(struct platform_device *pdev)
        touch->idev->close = pm860x_touch_close;
        touch->chip = chip;
        touch->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
-       touch->irq = irq + chip->irq_base;
-       touch->res_x = pdata->res_x;
+       touch->irq = irq;
+       touch->res_x = res_x;
        input_set_drvdata(touch->idev, touch);
 
        ret = request_threaded_irq(touch->irq, NULL, pm860x_touch_handler,
index 70232b1756f9bfb6e907e61f2a8d6b6671f36e9c..b7e8cc0957fcb65328fe300fffccfe3fc937a96b 100644 (file)
@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/leds.h>
@@ -123,6 +124,33 @@ static void pm860x_led_set(struct led_classdev *cdev,
        schedule_work(&data->work);
 }
 
+#ifdef CONFIG_OF
+static int pm860x_led_dt_init(struct platform_device *pdev,
+                             struct pm860x_led *data)
+{
+       struct device_node *nproot = pdev->dev.parent->of_node, *np;
+       int iset = 0;
+       if (!nproot)
+               return -ENODEV;
+       nproot = of_find_node_by_name(nproot, "leds");
+       if (!nproot) {
+               dev_err(&pdev->dev, "failed to find leds node\n");
+               return -ENODEV;
+       }
+       for_each_child_of_node(nproot, np) {
+               if (!of_node_cmp(np->name, data->name)) {
+                       of_property_read_u32(np, "marvell,88pm860x-iset",
+                                            &iset);
+                       data->iset = PM8606_LED_CURRENT(iset);
+                       break;
+               }
+       }
+       return 0;
+}
+#else
+#define pm860x_led_dt_init(x, y)       (-1)
+#endif
+
 static int pm860x_led_probe(struct platform_device *pdev)
 {
        struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@@ -179,8 +207,9 @@ static int pm860x_led_probe(struct platform_device *pdev)
        data->chip = chip;
        data->i2c = (chip->id == CHIP_PM8606) ? chip->client : chip->companion;
        data->port = pdev->id;
-       if (pdata && pdata->iset)
-               data->iset = pdata->iset;
+       if (pm860x_led_dt_init(pdev, data))
+               if (pdata)
+                       data->iset = pdata->iset;
 
        data->current_brightness = 0;
        data->cdev.name = data->name;
index 5b56fe8250b48b28d74814dc08c743ff91719f67..fdaf6861ce95269547f44ec72a7e1400c5b59df1 100644 (file)
@@ -16,6 +16,8 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -1112,12 +1114,6 @@ static void __devexit pm860x_device_exit(struct pm860x_chip *chip)
        mfd_remove_devices(chip->dev);
 }
 
-static const struct i2c_device_id pm860x_id_table[] = {
-       { "88PM860x", 0 },
-       {}
-};
-MODULE_DEVICE_TABLE(i2c, pm860x_id_table);
-
 static int verify_addr(struct i2c_client *i2c)
 {
        unsigned short addr_8607[] = {0x30, 0x34};
@@ -1144,21 +1140,52 @@ static struct regmap_config pm860x_regmap_config = {
        .val_bits = 8,
 };
 
+static int __devinit pm860x_dt_init(struct device_node *np,
+                                   struct device *dev,
+                                   struct pm860x_platform_data *pdata)
+{
+       int ret;
+
+       if (of_get_property(np, "marvell,88pm860x-irq-read-clr", NULL))
+               pdata->irq_mode = 1;
+       ret = of_property_read_u32(np, "marvell,88pm860x-slave-addr",
+                                  &pdata->companion_addr);
+       if (ret) {
+               dev_err(dev, "Not found \"marvell,88pm860x-slave-addr\" "
+                       "property\n");
+               pdata->companion_addr = 0;
+       }
+       return 0;
+}
+
 static int __devinit pm860x_probe(struct i2c_client *client,
                                  const struct i2c_device_id *id)
 {
        struct pm860x_platform_data *pdata = client->dev.platform_data;
+       struct device_node *node = client->dev.of_node;
        struct pm860x_chip *chip;
        int ret;
 
-       if (!pdata) {
+       if (node && !pdata) {
+               /* parse DT to get platform data */
+               pdata = devm_kzalloc(&client->dev,
+                                    sizeof(struct pm860x_platform_data),
+                                    GFP_KERNEL);
+               if (!pdata)
+                       return -ENOMEM;
+               ret = pm860x_dt_init(node, &client->dev, pdata);
+               if (ret)
+                       goto err;
+       } else if (!pdata) {
                pr_info("No platform data in %s!\n", __func__);
                return -EINVAL;
        }
 
        chip = kzalloc(sizeof(struct pm860x_chip), GFP_KERNEL);
-       if (chip == NULL)
-               return -ENOMEM;
+       if (chip == NULL) {
+               ret = -ENOMEM;
+               goto err;
+       }
 
        chip->id = verify_addr(client);
        chip->regmap = regmap_init_i2c(client, &pm860x_regmap_config);
@@ -1198,6 +1225,10 @@ static int __devinit pm860x_probe(struct i2c_client *client,
 
        pm860x_device_init(chip, pdata);
        return 0;
+err:
+       if (node)
+               devm_kfree(&client->dev, pdata);
+       return ret;
 }
 
 static int __devexit pm860x_remove(struct i2c_client *client)
@@ -1238,11 +1269,24 @@ static int pm860x_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(pm860x_pm_ops, pm860x_suspend, pm860x_resume);
 
+static const struct i2c_device_id pm860x_id_table[] = {
+       { "88PM860x", 0 },
+       {}
+};
+MODULE_DEVICE_TABLE(i2c, pm860x_id_table);
+
+static const struct of_device_id pm860x_dt_ids[] = {
+       { .compatible = "marvell,88pm860x", },
+       {},
+};
+MODULE_DEVICE_TABLE(of, pm860x_dt_ids);
+
 static struct i2c_driver pm860x_driver = {
        .driver = {
                .name   = "88PM860x",
                .owner  = THIS_MODULE,
                .pm     = &pm860x_pm_ops,
+               .of_match_table = of_match_ptr(pm860x_dt_ids),
        },
        .probe          = pm860x_probe,
        .remove         = __devexit_p(pm860x_remove),
index f96fbe38ff6f9817c8612d29dc6315cf440023b3..1c5ab0172ea282c73b0835d07be67e4172a8a6af 100644 (file)
@@ -12,6 +12,8 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
@@ -364,6 +366,34 @@ static struct pm8607_regulator_info pm8606_regulator_info[] = {
        PM8606_PREG(PREREGULATORB, 5),
 };
 
+#ifdef CONFIG_OF
+static int pm8607_regulator_dt_init(struct platform_device *pdev,
+                                   struct pm8607_regulator_info *info,
+                                   struct regulator_config *config)
+{
+       struct device_node *nproot, *np;
+       nproot = pdev->dev.parent->of_node;
+       if (!nproot)
+               return -ENODEV;
+       nproot = of_find_node_by_name(nproot, "regulators");
+       if (!nproot) {
+               dev_err(&pdev->dev, "failed to find regulators node\n");
+               return -ENODEV;
+       }
+       for_each_child_of_node(nproot, np) {
+               if (!of_node_cmp(np->name, info->desc.name)) {
+                       config->init_data =
+                               of_get_regulator_init_data(&pdev->dev, np);
+                       config->of_node = np;
+                       break;
+               }
+       }
+       return 0;
+}
+#else
+#define pm8607_regulator_dt_init(x, y, z)      (-1)
+#endif
+
 static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
 {
        struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@@ -402,9 +432,12 @@ static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
                info->slope_double = 1;
 
        config.dev = &pdev->dev;
-       config.init_data = pdata;
        config.driver_data = info;
 
+       if (pm8607_regulator_dt_init(pdev, info, &config))
+               if (pdata)
+                       config.init_data = pdata;
+
        if (chip->id == CHIP_PM8607)
                config.regmap = chip->regmap;
        else
index feddefc42109b5fe891b82b0c1ed520a6b9e9613..de9e854b326ac9a06b0c2f3fea0c19b9bf78980e 100644 (file)
@@ -11,6 +11,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
@@ -284,6 +285,28 @@ out:
 }
 #endif
 
+#ifdef CONFIG_OF
+static int __devinit pm860x_rtc_dt_init(struct platform_device *pdev,
+                                       struct pm860x_rtc_info *info)
+{
+       struct device_node *np = pdev->dev.parent->of_node;
+       int ret;
+       if (!np)
+               return -ENODEV;
+       np = of_find_node_by_name(np, "rtc");
+       if (!np) {
+               dev_err(&pdev->dev, "failed to find rtc node\n");
+               return -ENODEV;
+       }
+       ret = of_property_read_u32(np, "marvell,88pm860x-vrtc", &info->vrtc);
+       if (ret)
+               info->vrtc = 0;
+       return 0;
+}
+#else
+#define pm860x_rtc_dt_init(x, y)       (-1)
+#endif
+
 static int __devinit pm860x_rtc_probe(struct platform_device *pdev)
 {
        struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@@ -294,8 +317,6 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev)
        int ret;
 
        pdata = pdev->dev.platform_data;
-       if (pdata == NULL)
-               dev_warn(&pdev->dev, "No platform data!\n");
 
        info = kzalloc(sizeof(struct pm860x_rtc_info), GFP_KERNEL);
        if (!info)
@@ -345,9 +366,11 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev)
                }
        }
        rtc_tm_to_time(&tm, &ticks);
-       if (pdata && pdata->sync) {
-               pdata->sync(ticks);
-               info->sync = pdata->sync;
+       if (pm860x_rtc_dt_init(pdev, info)) {
+               if (pdata && pdata->sync) {
+                       pdata->sync(ticks);
+                       info->sync = pdata->sync;
+               }
        }
 
        info->rtc_dev = rtc_device_register("88pm860x-rtc", &pdev->dev,
@@ -366,10 +389,12 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev)
 
 #ifdef VRTC_CALIBRATION
        /* <00> -- 2.7V, <01> -- 2.9V, <10> -- 3.1V, <11> -- 3.3V */
-       if (pdata && pdata->vrtc)
-               info->vrtc = pdata->vrtc & 0x3;
-       else
-               info->vrtc = 1;
+       if (pm860x_rtc_dt_init(pdev, info)) {
+               if (pdata && pdata->vrtc)
+                       info->vrtc = pdata->vrtc & 0x3;
+               else
+                       info->vrtc = 1;
+       }
        pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, MEAS2_VRTC);
 
        /* calibrate VRTC */
index 965161cacefa87ff2da6d6193b9ff24cec520b20..b7ec34c57f46d7f3c0b345935c3e4857e3a0b104 100644 (file)
@@ -11,6 +11,7 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/fb.h>
@@ -159,6 +160,36 @@ static const struct backlight_ops pm860x_backlight_ops = {
        .get_brightness = pm860x_backlight_get_brightness,
 };
 
+#ifdef CONFIG_OF
+static int pm860x_backlight_dt_init(struct platform_device *pdev,
+                                   struct pm860x_backlight_data *data,
+                                   char *name)
+{
+       struct device_node *nproot = pdev->dev.parent->of_node, *np;
+       int iset = 0;
+       if (!nproot)
+               return -ENODEV;
+       nproot = of_find_node_by_name(nproot, "backlights");
+       if (!nproot) {
+               dev_err(&pdev->dev, "failed to find backlights node\n");
+               return -ENODEV;
+       }
+       for_each_child_of_node(nproot, np) {
+               if (!of_node_cmp(np->name, name)) {
+                       of_property_read_u32(np, "marvell,88pm860x-iset",
+                                            &iset);
+                       data->iset = PM8606_WLED_CURRENT(iset);
+                       of_property_read_u32(np, "marvell,88pm860x-pwm",
+                                            &data->pwm);
+                       break;
+               }
+       }
+       return 0;
+}
+#else
+#define pm860x_backlight_dt_init(x, y, z)      (-1)
+#endif
+
 static int pm860x_backlight_probe(struct platform_device *pdev)
 {
        struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@@ -203,9 +234,11 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
        data->i2c = (chip->id == CHIP_PM8606) ? chip->client    \
                        : chip->companion;
        data->current_brightness = MAX_BRIGHTNESS;
-       if (pdata) {
-               data->pwm = pdata->pwm;
-               data->iset = pdata->iset;
+       if (pm860x_backlight_dt_init(pdev, data, name)) {
+               if (pdata) {
+                       data->pwm = pdata->pwm;
+                       data->iset = pdata->iset;
+               }
        }
 
        memset(&props, 0, sizeof(struct backlight_properties));
index d515e5c438f05acd550430c7b1643533b62cdc44..ef3e6b701179e3c09d6898d2f3df288fd50866cc 100644 (file)
@@ -306,7 +306,7 @@ struct pm860x_chip {
        struct regmap           *regmap_companion;
 
        int                     buck3_double;   /* DVC ramp slope double */
-       unsigned short          companion_addr;
+       int                     companion_addr;
        unsigned short          osc_vote;
        int                     id;
        int                     irq_mode;
@@ -376,7 +376,7 @@ struct pm860x_platform_data {
        struct regulator_init_data      *ldo_vibrator;
        struct regulator_init_data      *ldo14;
 
-       unsigned short  companion_addr; /* I2C address of companion chip */
+       int             companion_addr; /* I2C address of companion chip */
        int             i2c_port;       /* Controlled by GI2C or PI2C */
        int             irq_mode;       /* Clear interrupt by read/write(0/1) */
        int             irq_base;       /* IRQ base number of 88pm860x */