{
struct xhci_virt_device *dev;
int i;
+ int old_active_eps = 0;
/* Slot ID 0 is reserved */
if (slot_id == 0 || !xhci->devs[slot_id])
if (!dev)
return;
+ if (dev->tt_info)
+ old_active_eps = dev->tt_info->active_eps;
+
for (i = 0; i < 31; ++i) {
if (dev->eps[i].ring)
xhci_ring_free(xhci, dev->eps[i].ring);
if (dev->eps[i].stream_info)
xhci_free_stream_info(xhci,
dev->eps[i].stream_info);
+ /* Endpoints on the TT/root port lists should have been removed
+ * when usb_disable_device() was called for the device.
+ * We can't drop them anyway, because the udev might have gone
+ * away by this point, and we can't tell what speed it was.
+ */
+ if (!list_empty(&dev->eps[i].bw_endpoint_list))
+ xhci_warn(xhci, "Slot %u endpoint %u "
+ "not removed from BW list!\n",
+ slot_id, i);
}
/* If this is a hub, free the TT(s) from the TT list */
xhci_free_tt_info(xhci, dev, slot_id);
+ /* If necessary, update the number of active TTs on this root port */
+ xhci_update_tt_active_eps(xhci, dev, old_active_eps);
if (dev->ring_cache) {
for (i = 0; i < dev->num_rings_cached; i++)
for (i = 0; i < 31; i++) {
xhci_init_endpoint_timer(xhci, &dev->eps[i]);
INIT_LIST_HEAD(&dev->eps[i].cancelled_td_list);
+ INIT_LIST_HEAD(&dev->eps[i].bw_endpoint_list);
}
/* Allocate endpoint 0 ring */
__le32 __iomem *addr;
u32 offset;
unsigned int num_ports;
- int i, port_index;
+ int i, j, port_index;
addr = &xhci->cap_regs->hcc_params;
offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
xhci->rh_bw = kzalloc(sizeof(*xhci->rh_bw)*num_ports, flags);
if (!xhci->rh_bw)
return -ENOMEM;
- for (i = 0; i < num_ports; i++)
+ for (i = 0; i < num_ports; i++) {
+ struct xhci_interval_bw_table *bw_table;
+
INIT_LIST_HEAD(&xhci->rh_bw[i].tts);
+ bw_table = &xhci->rh_bw[i].bw_table;
+ for (j = 0; j < XHCI_MAX_INTERVAL; j++)
+ INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints);
+ }
/*
* For whatever reason, the first capability offset is from the
xhci->num_active_eps);
}
+/* Run the algorithm on the bandwidth table. If this table is part of a
+ * TT, see if we need to update the number of active TTs.
+ */
+static int xhci_check_bw_table(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ int old_active_eps)
+{
+ return 0;
+}
+
+static bool xhci_is_async_ep(unsigned int ep_type)
+{
+ return (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP &&
+ ep_type != ISOC_IN_EP &&
+ ep_type != INT_IN_EP);
+}
+
+void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci,
+ struct xhci_bw_info *ep_bw,
+ struct xhci_interval_bw_table *bw_table,
+ struct usb_device *udev,
+ struct xhci_virt_ep *virt_ep,
+ struct xhci_tt_bw_info *tt_info)
+{
+ struct xhci_interval_bw *interval_bw;
+ int normalized_interval;
+
+ if (xhci_is_async_ep(ep_bw->type) ||
+ list_empty(&virt_ep->bw_endpoint_list))
+ return;
+
+ /* For LS/FS devices, we need to translate the interval expressed in
+ * microframes to frames.
+ */
+ if (udev->speed == USB_SPEED_HIGH)
+ normalized_interval = ep_bw->ep_interval;
+ else
+ normalized_interval = ep_bw->ep_interval - 3;
+
+ if (normalized_interval == 0)
+ bw_table->interval0_esit_payload -= ep_bw->max_esit_payload;
+ interval_bw = &bw_table->interval_bw[normalized_interval];
+ interval_bw->num_packets -= ep_bw->num_packets;
+ switch (udev->speed) {
+ case USB_SPEED_LOW:
+ interval_bw->overhead[LS_OVERHEAD_TYPE] -= 1;
+ break;
+ case USB_SPEED_FULL:
+ interval_bw->overhead[FS_OVERHEAD_TYPE] -= 1;
+ break;
+ case USB_SPEED_HIGH:
+ interval_bw->overhead[HS_OVERHEAD_TYPE] -= 1;
+ break;
+ case USB_SPEED_SUPER:
+ case USB_SPEED_UNKNOWN:
+ case USB_SPEED_WIRELESS:
+ /* Should never happen because only LS/FS/HS endpoints will get
+ * added to the endpoint list.
+ */
+ return;
+ }
+ if (tt_info)
+ tt_info->active_eps -= 1;
+ list_del_init(&virt_ep->bw_endpoint_list);
+}
+
+static void xhci_add_ep_to_interval_table(struct xhci_hcd *xhci,
+ struct xhci_bw_info *ep_bw,
+ struct xhci_interval_bw_table *bw_table,
+ struct usb_device *udev,
+ struct xhci_virt_ep *virt_ep,
+ struct xhci_tt_bw_info *tt_info)
+{
+ struct xhci_interval_bw *interval_bw;
+ struct xhci_virt_ep *smaller_ep;
+ int normalized_interval;
+
+ if (xhci_is_async_ep(ep_bw->type))
+ return;
+
+ /* For LS/FS devices, we need to translate the interval expressed in
+ * microframes to frames.
+ */
+ if (udev->speed == USB_SPEED_HIGH)
+ normalized_interval = ep_bw->ep_interval;
+ else
+ normalized_interval = ep_bw->ep_interval - 3;
+
+ if (normalized_interval == 0)
+ bw_table->interval0_esit_payload += ep_bw->max_esit_payload;
+ interval_bw = &bw_table->interval_bw[normalized_interval];
+ interval_bw->num_packets += ep_bw->num_packets;
+ switch (udev->speed) {
+ case USB_SPEED_LOW:
+ interval_bw->overhead[LS_OVERHEAD_TYPE] += 1;
+ break;
+ case USB_SPEED_FULL:
+ interval_bw->overhead[FS_OVERHEAD_TYPE] += 1;
+ break;
+ case USB_SPEED_HIGH:
+ interval_bw->overhead[HS_OVERHEAD_TYPE] += 1;
+ break;
+ case USB_SPEED_SUPER:
+ case USB_SPEED_UNKNOWN:
+ case USB_SPEED_WIRELESS:
+ /* Should never happen because only LS/FS/HS endpoints will get
+ * added to the endpoint list.
+ */
+ return;
+ }
+
+ if (tt_info)
+ tt_info->active_eps += 1;
+ /* Insert the endpoint into the list, largest max packet size first. */
+ list_for_each_entry(smaller_ep, &interval_bw->endpoints,
+ bw_endpoint_list) {
+ if (ep_bw->max_packet_size >=
+ smaller_ep->bw_info.max_packet_size) {
+ /* Add the new ep before the smaller endpoint */
+ list_add_tail(&virt_ep->bw_endpoint_list,
+ &smaller_ep->bw_endpoint_list);
+ return;
+ }
+ }
+ /* Add the new endpoint at the end of the list. */
+ list_add_tail(&virt_ep->bw_endpoint_list,
+ &interval_bw->endpoints);
+}
+
+void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ int old_active_eps)
+{
+ struct xhci_root_port_bw_info *rh_bw_info;
+ if (!virt_dev->tt_info)
+ return;
+
+ rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1];
+ if (old_active_eps == 0 &&
+ virt_dev->tt_info->active_eps != 0) {
+ rh_bw_info->num_active_tts += 1;
+ } else if (old_active_eps != 0 &&
+ virt_dev->tt_info->active_eps == 0) {
+ rh_bw_info->num_active_tts -= 1;
+ }
+}
+
+static int xhci_reserve_bandwidth(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ struct xhci_container_ctx *in_ctx)
+{
+ struct xhci_bw_info ep_bw_info[31];
+ int i;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ int old_active_eps = 0;
+
+ if (virt_dev->udev->speed == USB_SPEED_SUPER)
+ return 0;
+
+ if (virt_dev->tt_info)
+ old_active_eps = virt_dev->tt_info->active_eps;
+
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+
+ for (i = 0; i < 31; i++) {
+ if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
+ continue;
+
+ /* Make a copy of the BW info in case we need to revert this */
+ memcpy(&ep_bw_info[i], &virt_dev->eps[i].bw_info,
+ sizeof(ep_bw_info[i]));
+ /* Drop the endpoint from the interval table if the endpoint is
+ * being dropped or changed.
+ */
+ if (EP_IS_DROPPED(ctrl_ctx, i))
+ xhci_drop_ep_from_interval_table(xhci,
+ &virt_dev->eps[i].bw_info,
+ virt_dev->bw_table,
+ virt_dev->udev,
+ &virt_dev->eps[i],
+ virt_dev->tt_info);
+ }
+ /* Overwrite the information stored in the endpoints' bw_info */
+ xhci_update_bw_info(xhci, virt_dev->in_ctx, ctrl_ctx, virt_dev);
+ for (i = 0; i < 31; i++) {
+ /* Add any changed or added endpoints to the interval table */
+ if (EP_IS_ADDED(ctrl_ctx, i))
+ xhci_add_ep_to_interval_table(xhci,
+ &virt_dev->eps[i].bw_info,
+ virt_dev->bw_table,
+ virt_dev->udev,
+ &virt_dev->eps[i],
+ virt_dev->tt_info);
+ }
+
+ if (!xhci_check_bw_table(xhci, virt_dev, old_active_eps)) {
+ /* Ok, this fits in the bandwidth we have.
+ * Update the number of active TTs.
+ */
+ xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+ return 0;
+ }
+
+ /* We don't have enough bandwidth for this, revert the stored info. */
+ for (i = 0; i < 31; i++) {
+ if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
+ continue;
+
+ /* Drop the new copies of any added or changed endpoints from
+ * the interval table.
+ */
+ if (EP_IS_ADDED(ctrl_ctx, i)) {
+ xhci_drop_ep_from_interval_table(xhci,
+ &virt_dev->eps[i].bw_info,
+ virt_dev->bw_table,
+ virt_dev->udev,
+ &virt_dev->eps[i],
+ virt_dev->tt_info);
+ }
+ /* Revert the endpoint back to its old information */
+ memcpy(&virt_dev->eps[i].bw_info, &ep_bw_info[i],
+ sizeof(ep_bw_info[i]));
+ /* Add any changed or dropped endpoints back into the table */
+ if (EP_IS_DROPPED(ctrl_ctx, i))
+ xhci_add_ep_to_interval_table(xhci,
+ &virt_dev->eps[i].bw_info,
+ virt_dev->bw_table,
+ virt_dev->udev,
+ &virt_dev->eps[i],
+ virt_dev->tt_info);
+ }
+ return -ENOMEM;
+}
+
+
/* Issue a configure endpoint command or evaluate context command
* and wait for it to finish.
*/
xhci->num_active_eps);
return -ENOMEM;
}
+ if ((xhci->quirks & XHCI_SW_BW_CHECKING) &&
+ xhci_reserve_bandwidth(xhci, virt_dev, in_ctx)) {
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
+ xhci_free_host_resources(xhci, in_ctx);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "Not enough bandwidth\n");
+ return -ENOMEM;
+ }
if (command) {
cmd_completion = command->completion;
!(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1))))
xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
}
- xhci_update_bw_info(xhci, virt_dev->in_ctx, ctrl_ctx, virt_dev);
xhci_zero_in_ctx(xhci, virt_dev);
/*
* Install any rings for completely new endpoints or changed endpoints,
int timeleft;
int last_freed_endpoint;
struct xhci_slot_ctx *slot_ctx;
+ int old_active_eps = 0;
ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__);
if (ret <= 0)
xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
last_freed_endpoint = i;
}
+ if (!list_empty(&virt_dev->eps[i].bw_endpoint_list))
+ xhci_drop_ep_from_interval_table(xhci,
+ &virt_dev->eps[i].bw_info,
+ virt_dev->bw_table,
+ udev,
+ &virt_dev->eps[i],
+ virt_dev->tt_info);
xhci_clear_endpoint_bw_info(&virt_dev->eps[i].bw_info);
}
+ /* If necessary, update the number of active TTs on this root port */
+ xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+
xhci_dbg(xhci, "Output context after successful reset device cmd:\n");
xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint);
ret = 0;
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff