ARM: dts: BCM5310x: Enable switch ports on SmartRG SR400AC

Define the port mapping for the SmartRG SR400ACE device.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 8b0c440b2e71985426ff75694e9659d09c5068f8..70f4bb9d864aedc1bb9b1ce336babaa0940c0796 100644 (file)
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -126,3 +126,43 @@
 &spi_nor {
        status = "okay";
 };
+
+&srab {
+       status = "okay";
+
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                       reg = <0>;
+                       label = "lan4";
+               };
+
+               port@1 {
+                       reg = <1>;
+                       label = "lan3";
+               };
+
+               port@2 {
+                       reg = <2>;
+                       label = "lan2";
+               };
+
+               port@3 {
+                       reg = <3>;
+                       label = "lan1";
+               };
+
+               port@4 {
+                       reg = <4>;
+                       label = "wan";
+               };
+
+               port@5 {
+                       reg = <5>;
+                       label = "cpu";
+                       ethernet = <&gmac0>;
+               };
+       };
+};