--- /dev/null
+/*
+ * arch/arm64/kernel/probes/decode-insn.c
+ *
+ * Copyright (C) 2013 Linaro Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <asm/kprobes.h>
+#include <asm/insn.h>
+#include <asm/sections.h>
+
+#include "decode-insn.h"
+
+static bool __kprobes aarch64_insn_is_steppable(u32 insn)
+{
+ /*
+ * Branch instructions will write a new value into the PC which is
+ * likely to be relative to the XOL address and therefore invalid.
+ * Deliberate generation of an exception during stepping is also not
+ * currently safe. Lastly, MSR instructions can do any number of nasty
+ * things we can't handle during single-stepping.
+ */
+ if (aarch64_get_insn_class(insn) == AARCH64_INSN_CLS_BR_SYS) {
+ if (aarch64_insn_is_branch(insn) ||
+ aarch64_insn_is_msr_imm(insn) ||
+ aarch64_insn_is_msr_reg(insn) ||
+ aarch64_insn_is_exception(insn) ||
+ aarch64_insn_is_eret(insn))
+ return false;
+
+ /*
+ * The MRS instruction may not return a correct value when
+ * executing in the single-stepping environment. We do make one
+ * exception, for reading the DAIF bits.
+ */
+ if (aarch64_insn_is_mrs(insn))
+ return aarch64_insn_extract_system_reg(insn)
+ != AARCH64_INSN_SPCLREG_DAIF;
+
+ /*
+ * The HINT instruction is is problematic when single-stepping,
+ * except for the NOP case.
+ */
+ if (aarch64_insn_is_hint(insn))
+ return aarch64_insn_is_nop(insn);
+
+ return true;
+ }
+
+ /*
+ * Instructions which load PC relative literals are not going to work
+ * when executed from an XOL slot. Instructions doing an exclusive
+ * load/store are not going to complete successfully when single-step
+ * exception handling happens in the middle of the sequence.
+ */
+ if (aarch64_insn_uses_literal(insn) ||
+ aarch64_insn_is_exclusive(insn))
+ return false;
+
+ return true;
+}
+
+/* Return:
+ * INSN_REJECTED If instruction is one not allowed to kprobe,
+ * INSN_GOOD If instruction is supported and uses instruction slot,
+ */
+static enum kprobe_insn __kprobes
+arm_probe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /*
+ * Instructions reading or modifying the PC won't work from the XOL
+ * slot.
+ */
+ if (aarch64_insn_is_steppable(insn))
+ return INSN_GOOD;
+ else
+ return INSN_REJECTED;
+}
+
+static bool __kprobes
+is_probed_address_atomic(kprobe_opcode_t *scan_start, kprobe_opcode_t *scan_end)
+{
+ while (scan_start > scan_end) {
+ /*
+ * atomic region starts from exclusive load and ends with
+ * exclusive store.
+ */
+ if (aarch64_insn_is_store_ex(le32_to_cpu(*scan_start)))
+ return false;
+ else if (aarch64_insn_is_load_ex(le32_to_cpu(*scan_start)))
+ return true;
+ scan_start--;
+ }
+
+ return false;
+}
+
+enum kprobe_insn __kprobes
+arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi)
+{
+ enum kprobe_insn decoded;
+ kprobe_opcode_t insn = le32_to_cpu(*addr);
+ kprobe_opcode_t *scan_start = addr - 1;
+ kprobe_opcode_t *scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
+#if defined(CONFIG_MODULES) && defined(MODULES_VADDR)
+ struct module *mod;
+#endif
+
+ if (addr >= (kprobe_opcode_t *)_text &&
+ scan_end < (kprobe_opcode_t *)_text)
+ scan_end = (kprobe_opcode_t *)_text;
+#if defined(CONFIG_MODULES) && defined(MODULES_VADDR)
+ else {
+ preempt_disable();
+ mod = __module_address((unsigned long)addr);
+ if (mod && within_module_init((unsigned long)addr, mod) &&
+ !within_module_init((unsigned long)scan_end, mod))
+ scan_end = (kprobe_opcode_t *)mod->init_layout.base;
+ else if (mod && within_module_core((unsigned long)addr, mod) &&
+ !within_module_core((unsigned long)scan_end, mod))
+ scan_end = (kprobe_opcode_t *)mod->core_layout.base;
+ preempt_enable();
+ }
+#endif
+ decoded = arm_probe_decode_insn(insn, asi);
+
+ if (decoded == INSN_REJECTED ||
+ is_probed_address_atomic(scan_start, scan_end))
+ return INSN_REJECTED;
+
+ return decoded;
+}
--- /dev/null
+/*
+ * arch/arm64/kernel/probes/kprobes.c
+ *
+ * Kprobes support for ARM64
+ *
+ * Copyright (C) 2013 Linaro Limited.
+ * Author: Sandeepa Prabhu <sandeepa.prabhu@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/stop_machine.h>
+#include <linux/stringify.h>
+#include <asm/traps.h>
+#include <asm/ptrace.h>
+#include <asm/cacheflush.h>
+#include <asm/debug-monitors.h>
+#include <asm/system_misc.h>
+#include <asm/insn.h>
+#include <asm/uaccess.h>
+#include <asm/irq.h>
+
+#include "decode-insn.h"
+
+#define MIN_STACK_SIZE(addr) (on_irq_stack(addr, raw_smp_processor_id()) ? \
+ min((unsigned long)IRQ_STACK_SIZE, \
+ IRQ_STACK_PTR(raw_smp_processor_id()) - (addr)) : \
+ min((unsigned long)MAX_STACK_SIZE, \
+ (unsigned long)current_thread_info() + THREAD_START_SP - (addr)))
+
+void jprobe_return_break(void);
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
+{
+ /* prepare insn slot */
+ p->ainsn.insn[0] = cpu_to_le32(p->opcode);
+
+ flush_icache_range((uintptr_t) (p->ainsn.insn),
+ (uintptr_t) (p->ainsn.insn) +
+ MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+
+ /*
+ * Needs restoring of return address after stepping xol.
+ */
+ p->ainsn.restore = (unsigned long) p->addr +
+ sizeof(kprobe_opcode_t);
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+ unsigned long probe_addr = (unsigned long)p->addr;
+ extern char __start_rodata[];
+ extern char __end_rodata[];
+
+ if (probe_addr & 0x3)
+ return -EINVAL;
+
+ /* copy instruction */
+ p->opcode = le32_to_cpu(*p->addr);
+
+ if (in_exception_text(probe_addr))
+ return -EINVAL;
+ if (probe_addr >= (unsigned long) __start_rodata &&
+ probe_addr <= (unsigned long) __end_rodata)
+ return -EINVAL;
+
+ /* decode instruction */
+ switch (arm_kprobe_decode_insn(p->addr, &p->ainsn)) {
+ case INSN_REJECTED: /* insn not supported */
+ return -EINVAL;
+
+ case INSN_GOOD: /* instruction uses slot */
+ p->ainsn.insn = get_insn_slot();
+ if (!p->ainsn.insn)
+ return -ENOMEM;
+ break;
+ };
+
+ /* prepare the instruction */
+ arch_prepare_ss_slot(p);
+
+ return 0;
+}
+
+static int __kprobes patch_text(kprobe_opcode_t *addr, u32 opcode)
+{
+ void *addrs[1];
+ u32 insns[1];
+
+ addrs[0] = (void *)addr;
+ insns[0] = (u32)opcode;
+
+ return aarch64_insn_patch_text(addrs, insns, 1);
+}
+
+/* arm kprobe: install breakpoint in text */
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+ patch_text(p->addr, BRK64_OPCODE_KPROBES);
+}
+
+/* disarm kprobe: remove breakpoint from text */
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+ patch_text(p->addr, p->opcode);
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+ if (p->ainsn.insn) {
+ free_insn_slot(p->ainsn.insn, 0);
+ p->ainsn.insn = NULL;
+ }
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+ kcb->prev_kprobe.kp = kprobe_running();
+ kcb->prev_kprobe.status = kcb->kprobe_status;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+ __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
+ kcb->kprobe_status = kcb->prev_kprobe.status;
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p)
+{
+ __this_cpu_write(current_kprobe, p);
+}
+
+/*
+ * The D-flag (Debug mask) is set (masked) upon debug exception entry.
+ * Kprobes needs to clear (unmask) D-flag -ONLY- in case of recursive
+ * probe i.e. when probe hit from kprobe handler context upon
+ * executing the pre/post handlers. In this case we return with
+ * D-flag clear so that single-stepping can be carried-out.
+ *
+ * Leave D-flag set in all other cases.
+ */
+static void __kprobes
+spsr_set_debug_flag(struct pt_regs *regs, int mask)
+{
+ unsigned long spsr = regs->pstate;
+
+ if (mask)
+ spsr |= PSR_D_BIT;
+ else
+ spsr &= ~PSR_D_BIT;
+
+ regs->pstate = spsr;
+}
+
+/*
+ * Interrupts need to be disabled before single-step mode is set, and not
+ * reenabled until after single-step mode ends.
+ * Without disabling interrupt on local CPU, there is a chance of
+ * interrupt occurrence in the period of exception return and start of
+ * out-of-line single-step, that result in wrongly single stepping
+ * into the interrupt handler.
+ */
+static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb,
+ struct pt_regs *regs)
+{
+ kcb->saved_irqflag = regs->pstate;
+ regs->pstate |= PSR_I_BIT;
+}
+
+static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb,
+ struct pt_regs *regs)
+{
+ if (kcb->saved_irqflag & PSR_I_BIT)
+ regs->pstate |= PSR_I_BIT;
+ else
+ regs->pstate &= ~PSR_I_BIT;
+}
+
+static void __kprobes
+set_ss_context(struct kprobe_ctlblk *kcb, unsigned long addr)
+{
+ kcb->ss_ctx.ss_pending = true;
+ kcb->ss_ctx.match_addr = addr + sizeof(kprobe_opcode_t);
+}
+
+static void __kprobes clear_ss_context(struct kprobe_ctlblk *kcb)
+{
+ kcb->ss_ctx.ss_pending = false;
+ kcb->ss_ctx.match_addr = 0;
+}
+
+static void __kprobes setup_singlestep(struct kprobe *p,
+ struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb, int reenter)
+{
+ unsigned long slot;
+
+ if (reenter) {
+ save_previous_kprobe(kcb);
+ set_current_kprobe(p);
+ kcb->kprobe_status = KPROBE_REENTER;
+ } else {
+ kcb->kprobe_status = KPROBE_HIT_SS;
+ }
+
+ BUG_ON(!p->ainsn.insn);
+
+ /* prepare for single stepping */
+ slot = (unsigned long)p->ainsn.insn;
+
+ set_ss_context(kcb, slot); /* mark pending ss */
+
+ if (kcb->kprobe_status == KPROBE_REENTER)
+ spsr_set_debug_flag(regs, 0);
+
+ /* IRQs and single stepping do not mix well. */
+ kprobes_save_local_irqflag(kcb, regs);
+ kernel_enable_single_step(regs);
+ instruction_pointer_set(regs, slot);
+}
+
+static int __kprobes reenter_kprobe(struct kprobe *p,
+ struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ switch (kcb->kprobe_status) {
+ case KPROBE_HIT_SSDONE:
+ case KPROBE_HIT_ACTIVE:
+ kprobes_inc_nmissed_count(p);
+ setup_singlestep(p, regs, kcb, 1);
+ break;
+ case KPROBE_HIT_SS:
+ case KPROBE_REENTER:
+ pr_warn("Unrecoverable kprobe detected at %p.\n", p->addr);
+ dump_kprobe(p);
+ BUG();
+ break;
+ default:
+ WARN_ON(1);
+ return 0;
+ }
+
+ return 1;
+}
+
+static void __kprobes
+post_kprobe_handler(struct kprobe_ctlblk *kcb, struct pt_regs *regs)
+{
+ struct kprobe *cur = kprobe_running();
+
+ if (!cur)
+ return;
+
+ /* return addr restore if non-branching insn */
+ if (cur->ainsn.restore != 0)
+ instruction_pointer_set(regs, cur->ainsn.restore);
+
+ /* restore back original saved kprobe variables and continue */
+ if (kcb->kprobe_status == KPROBE_REENTER) {
+ restore_previous_kprobe(kcb);
+ return;
+ }
+ /* call post handler */
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ if (cur->post_handler) {
+ /* post_handler can hit breakpoint and single step
+ * again, so we enable D-flag for recursive exception.
+ */
+ cur->post_handler(cur, regs, 0);
+ }
+
+ reset_current_kprobe();
+}
+
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
+{
+ struct kprobe *cur = kprobe_running();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ switch (kcb->kprobe_status) {
+ case KPROBE_HIT_SS:
+ case KPROBE_REENTER:
+ /*
+ * We are here because the instruction being single
+ * stepped caused a page fault. We reset the current
+ * kprobe and the ip points back to the probe address
+ * and allow the page fault handler to continue as a
+ * normal page fault.
+ */
+ instruction_pointer_set(regs, (unsigned long) cur->addr);
+ if (!instruction_pointer(regs))
+ BUG();
+
+ kernel_disable_single_step();
+ if (kcb->kprobe_status == KPROBE_REENTER)
+ spsr_set_debug_flag(regs, 1);
+
+ if (kcb->kprobe_status == KPROBE_REENTER)
+ restore_previous_kprobe(kcb);
+ else
+ reset_current_kprobe();
+
+ break;
+ case KPROBE_HIT_ACTIVE:
+ case KPROBE_HIT_SSDONE:
+ /*
+ * We increment the nmissed count for accounting,
+ * we can also use npre/npostfault count for accounting
+ * these specific fault cases.
+ */
+ kprobes_inc_nmissed_count(cur);
+
+ /*
+ * We come here because instructions in the pre/post
+ * handler caused the page_fault, this could happen
+ * if handler tries to access user space by
+ * copy_from_user(), get_user() etc. Let the
+ * user-specified handler try to fix it first.
+ */
+ if (cur->fault_handler && cur->fault_handler(cur, regs, fsr))
+ return 1;
+
+ /*
+ * In case the user-specified fault handler returned
+ * zero, try to fix up.
+ */
+ if (fixup_exception(regs))
+ return 1;
+ }
+ return 0;
+}
+
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ return NOTIFY_DONE;
+}
+
+static void __kprobes kprobe_handler(struct pt_regs *regs)
+{
+ struct kprobe *p, *cur_kprobe;
+ struct kprobe_ctlblk *kcb;
+ unsigned long addr = instruction_pointer(regs);
+
+ kcb = get_kprobe_ctlblk();
+ cur_kprobe = kprobe_running();
+
+ p = get_kprobe((kprobe_opcode_t *) addr);
+
+ if (p) {
+ if (cur_kprobe) {
+ if (reenter_kprobe(p, regs, kcb))
+ return;
+ } else {
+ /* Probe hit */
+ set_current_kprobe(p);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+ /*
+ * If we have no pre-handler or it returned 0, we
+ * continue with normal processing. If we have a
+ * pre-handler and it returned non-zero, it prepped
+ * for calling the break_handler below on re-entry,
+ * so get out doing nothing more here.
+ *
+ * pre_handler can hit a breakpoint and can step thru
+ * before return, keep PSTATE D-flag enabled until
+ * pre_handler return back.
+ */
+ if (!p->pre_handler || !p->pre_handler(p, regs)) {
+ setup_singlestep(p, regs, kcb, 0);
+ return;
+ }
+ }
+ } else if ((le32_to_cpu(*(kprobe_opcode_t *) addr) ==
+ BRK64_OPCODE_KPROBES) && cur_kprobe) {
+ /* We probably hit a jprobe. Call its break handler. */
+ if (cur_kprobe->break_handler &&
+ cur_kprobe->break_handler(cur_kprobe, regs)) {
+ setup_singlestep(cur_kprobe, regs, kcb, 0);
+ return;
+ }
+ }
+ /*
+ * The breakpoint instruction was removed right
+ * after we hit it. Another cpu has removed
+ * either a probepoint or a debugger breakpoint
+ * at this address. In either case, no further
+ * handling of this interrupt is appropriate.
+ * Return back to original instruction, and continue.
+ */
+}
+
+static int __kprobes
+kprobe_ss_hit(struct kprobe_ctlblk *kcb, unsigned long addr)
+{
+ if ((kcb->ss_ctx.ss_pending)
+ && (kcb->ss_ctx.match_addr == addr)) {
+ clear_ss_context(kcb); /* clear pending ss */
+ return DBG_HOOK_HANDLED;
+ }
+ /* not ours, kprobes should ignore it */
+ return DBG_HOOK_ERROR;
+}
+
+int __kprobes
+kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ int retval;
+
+ /* return error if this is not our step */
+ retval = kprobe_ss_hit(kcb, instruction_pointer(regs));
+
+ if (retval == DBG_HOOK_HANDLED) {
+ kprobes_restore_local_irqflag(kcb, regs);
+ kernel_disable_single_step();
+
+ if (kcb->kprobe_status == KPROBE_REENTER)
+ spsr_set_debug_flag(regs, 1);
+
+ post_kprobe_handler(kcb, regs);
+ }
+
+ return retval;
+}
+
+int __kprobes
+kprobe_breakpoint_handler(struct pt_regs *regs, unsigned int esr)
+{
+ kprobe_handler(regs);
+ return DBG_HOOK_HANDLED;
+}
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ long stack_ptr = kernel_stack_pointer(regs);
+
+ kcb->jprobe_saved_regs = *regs;
+ /*
+ * As Linus pointed out, gcc assumes that the callee
+ * owns the argument space and could overwrite it, e.g.
+ * tailcall optimization. So, to be absolutely safe
+ * we also save and restore enough stack bytes to cover
+ * the argument area.
+ */
+ memcpy(kcb->jprobes_stack, (void *)stack_ptr,
+ MIN_STACK_SIZE(stack_ptr));
+
+ instruction_pointer_set(regs, (unsigned long) jp->entry);
+ preempt_disable();
+ pause_graph_tracing();
+ return 1;
+}
+
+void __kprobes jprobe_return(void)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ /*
+ * Jprobe handler return by entering break exception,
+ * encoded same as kprobe, but with following conditions
+ * -a magic number in x0 to identify from rest of other kprobes.
+ * -restore stack addr to original saved pt_regs
+ */
+ asm volatile ("ldr x0, [%0]\n\t"
+ "mov sp, x0\n\t"
+ ".globl jprobe_return_break\n\t"
+ "jprobe_return_break:\n\t"
+ "brk %1\n\t"
+ :
+ : "r"(&kcb->jprobe_saved_regs.sp),
+ "I"(BRK64_ESR_KPROBES)
+ : "memory");
+}
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ long stack_addr = kcb->jprobe_saved_regs.sp;
+ long orig_sp = kernel_stack_pointer(regs);
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+
+ if (instruction_pointer(regs) != (u64) jprobe_return_break)
+ return 0;
+
+ if (orig_sp != stack_addr) {
+ struct pt_regs *saved_regs =
+ (struct pt_regs *)kcb->jprobe_saved_regs.sp;
+ pr_err("current sp %lx does not match saved sp %lx\n",
+ orig_sp, stack_addr);
+ pr_err("Saved registers for jprobe %p\n", jp);
+ show_regs(saved_regs);
+ pr_err("Current registers\n");
+ show_regs(regs);
+ BUG();
+ }
+ unpause_graph_tracing();
+ *regs = kcb->jprobe_saved_regs;
+ memcpy((void *)stack_addr, kcb->jprobes_stack,
+ MIN_STACK_SIZE(stack_addr));
+ preempt_enable_no_resched();
+ return 1;
+}
+
+int __init arch_init_kprobes(void)
+{
+ return 0;
+}
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff