power: supply: bq24190_charger: Call power_supply_changed() for relevant component

We wrongly get uevents for bq24190-charger and bq24190-battery on every
register change.

Fix by checking the association with charger and battery before
emitting uevent(s).

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index 63ea948dc8fcd2d86e5e39e67a5b7f79c83dc1f5..bf7c30a4acfb428679e9fb0484edaf81acbde45b 100644 (file)
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -159,7 +159,6 @@ struct bq24190_dev_info {
        unsigned int                    gpio_int;
        unsigned int                    irq;
        struct mutex                    f_reg_lock;
-       bool                            first_time;
        bool                            charger_health_valid;
        bool                            battery_health_valid;
        bool                            battery_status_valid;
@@ -1197,7 +1196,10 @@ static const struct power_supply_desc bq24190_battery_desc = {
 static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
 {
        struct bq24190_dev_info *bdi = data;
-       bool alert_userspace = false;
+       const u8 battery_mask_ss = BQ24190_REG_SS_CHRG_STAT_MASK;
+       const u8 battery_mask_f = BQ24190_REG_F_BAT_FAULT_MASK
+                               | BQ24190_REG_F_NTC_FAULT_MASK;
+       bool alert_charger = false, alert_battery = false;
        u8 ss_reg = 0, f_reg = 0;
        int ret;
 
@@ -1225,8 +1227,12 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
                                        ret);
                }
 
+               if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss))
+                       alert_battery = true;
+               if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss))
+                       alert_charger = true;
+
                bdi->ss_reg = ss_reg;
-               alert_userspace = true;
        }
 
        mutex_lock(&bdi->f_reg_lock);
@@ -1239,33 +1245,23 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
        }
 
        if (f_reg != bdi->f_reg) {
+               if ((bdi->f_reg & battery_mask_f) != (f_reg & battery_mask_f))
+                       alert_battery = true;
+               if ((bdi->f_reg & ~battery_mask_f) != (f_reg & ~battery_mask_f))
+                       alert_charger = true;
+
                bdi->f_reg = f_reg;
                bdi->charger_health_valid = true;
                bdi->battery_health_valid = true;
                bdi->battery_status_valid = true;
-
-               alert_userspace = true;
        }
 
        mutex_unlock(&bdi->f_reg_lock);
 
-       /*
-        * Sometimes bq24190 gives a steady trickle of interrupts even
-        * though the watchdog timer is turned off and neither the STATUS
-        * nor FAULT registers have changed.  Weed out these sprurious
-        * interrupts so userspace isn't alerted for no reason.
-        * In addition, the chip always generates an interrupt after
-        * register reset so we should ignore that one (the very first
-        * interrupt received).
-        */
-       if (alert_userspace) {
-               if (!bdi->first_time) {
-                       power_supply_changed(bdi->charger);
-                       power_supply_changed(bdi->battery);
-               } else {
-                       bdi->first_time = false;
-               }
-       }
+       if (alert_charger)
+               power_supply_changed(bdi->charger);
+       if (alert_battery)
+               power_supply_changed(bdi->battery);
 
 out:
        pm_runtime_put_sync(bdi->dev);
@@ -1300,6 +1296,10 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi)
                goto out;
 
        ret = bq24190_set_mode_host(bdi);
+       if (ret < 0)
+               goto out;
+
+       ret = bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
 out:
        pm_runtime_put_sync(bdi->dev);
        return ret;
@@ -1375,7 +1375,8 @@ static int bq24190_probe(struct i2c_client *client,
        bdi->model = id->driver_data;
        strncpy(bdi->model_name, id->name, I2C_NAME_SIZE);
        mutex_init(&bdi->f_reg_lock);
-       bdi->first_time = true;
+       bdi->f_reg = 0;
+       bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
        bdi->charger_health_valid = false;
        bdi->battery_health_valid = false;
        bdi->battery_status_valid = false;
@@ -1489,6 +1490,8 @@ static int bq24190_pm_resume(struct device *dev)
        struct i2c_client *client = to_i2c_client(dev);
        struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
 
+       bdi->f_reg = 0;
+       bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
        bdi->charger_health_valid = false;
        bdi->battery_health_valid = false;
        bdi->battery_status_valid = false;
@@ -1496,6 +1499,7 @@ static int bq24190_pm_resume(struct device *dev)
        pm_runtime_get_sync(bdi->dev);
        bq24190_register_reset(bdi);
        bq24190_set_mode_host(bdi);
+       bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
        pm_runtime_put_sync(bdi->dev);
 
        /* Things may have changed while suspended so alert upper layer */