#include <linux/mfd/core.h>
#include <linux/mfd/twl6040.h>
-static struct platform_device *twl6040_dev;
-
int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
{
int ret;
if (intid & TWL6040_THINT) {
status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
if (status & TWL6040_TSHUTDET) {
- dev_warn(&twl6040_dev->dev,
+ dev_warn(twl6040->dev,
"Thermal shutdown, powering-off");
twl6040_power(twl6040, 0);
} else {
- dev_warn(&twl6040_dev->dev,
+ dev_warn(twl6040->dev,
"Leaving thermal shutdown, powering-on");
twl6040_power(twl6040, 1);
}
if (!time_left) {
intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
if (!(intid & TWL6040_READYINT)) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"timeout waiting for READYINT\n");
return -ETIMEDOUT;
}
/* wait for power-up completion */
ret = twl6040_power_up_completion(twl6040, naudint);
if (ret) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"automatic power-down failed\n");
twl6040->power_count = 0;
goto out;
/* use manual power-up sequence */
ret = twl6040_power_up(twl6040);
if (ret) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"manual power-up failed\n");
twl6040->power_count = 0;
goto out;
} else {
/* already powered-down */
if (!twl6040->power_count) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"device is already powered-off\n");
ret = -EPERM;
goto out;
lppllctl &= ~TWL6040_LPLLFIN;
break;
default:
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"freq_out %d not supported\n", freq_out);
ret = -EINVAL;
goto pll_out;
hppllctl);
break;
default:
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"freq_in %d not supported\n", freq_in);
ret = -EINVAL;
goto pll_out;
case TWL6040_SYSCLK_SEL_HPPLL:
/* high-performance PLL can provide only 19.2 MHz */
if (freq_out != 19200000) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"freq_out %d not supported\n", freq_out);
ret = -EINVAL;
goto pll_out;
TWL6040_HPLLENA;
break;
default:
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"freq_in %d not supported\n", freq_in);
ret = -EINVAL;
goto pll_out;
twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
break;
default:
- dev_err(&twl6040_dev->dev, "unknown pll id %d\n", pll_id);
+ dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
ret = -EINVAL;
goto pll_out;
}
platform_set_drvdata(pdev, twl6040);
- twl6040_dev = pdev;
twl6040->dev = &pdev->dev;
twl6040->audpwron = pdata->audpwron_gpio;
twl6040->irq = pdata->naudint_irq;
gpio1_err:
platform_set_drvdata(pdev, NULL);
kfree(twl6040);
- twl6040_dev = NULL;
return ret;
}
mfd_remove_devices(&pdev->dev);
platform_set_drvdata(pdev, NULL);
kfree(twl6040);
- twl6040_dev = NULL;
return 0;
}