--- /dev/null
+/*
+ * Samsung Laptop driver
+ *
+ * Copyright (C) 2009,2011 Greg Kroah-Hartman (gregkh@suse.de)
+ * Copyright (C) 2009,2011 Novell Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/dmi.h>
+#include <linux/platform_device.h>
+#include <linux/rfkill.h>
+
+/*
+ * This driver is needed because a number of Samsung laptops do not hook
+ * their control settings through ACPI. So we have to poke around in the
+ * BIOS to do things like brightness values, and "special" key controls.
+ */
+
+/*
+ * We have 0 - 8 as valid brightness levels. The specs say that level 0 should
+ * be reserved by the BIOS (which really doesn't make much sense), we tell
+ * userspace that the value is 0 - 7 and then just tell the hardware 1 - 8
+ */
+#define MAX_BRIGHT 0x07
+
+
+#define SABI_IFACE_MAIN 0x00
+#define SABI_IFACE_SUB 0x02
+#define SABI_IFACE_COMPLETE 0x04
+#define SABI_IFACE_DATA 0x05
+
+/* Structure to get data back to the calling function */
+struct sabi_retval {
+ u8 retval[20];
+};
+
+struct sabi_header_offsets {
+ u8 port;
+ u8 re_mem;
+ u8 iface_func;
+ u8 en_mem;
+ u8 data_offset;
+ u8 data_segment;
+};
+
+struct sabi_commands {
+ /*
+ * Brightness is 0 - 8, as described above.
+ * Value 0 is for the BIOS to use
+ */
+ u8 get_brightness;
+ u8 set_brightness;
+
+ /*
+ * first byte:
+ * 0x00 - wireless is off
+ * 0x01 - wireless is on
+ * second byte:
+ * 0x02 - 3G is off
+ * 0x03 - 3G is on
+ * TODO, verify 3G is correct, that doesn't seem right...
+ */
+ u8 get_wireless_button;
+ u8 set_wireless_button;
+
+ /* 0 is off, 1 is on */
+ u8 get_backlight;
+ u8 set_backlight;
+
+ /*
+ * 0x80 or 0x00 - no action
+ * 0x81 - recovery key pressed
+ */
+ u8 get_recovery_mode;
+ u8 set_recovery_mode;
+
+ /*
+ * on seclinux: 0 is low, 1 is high,
+ * on swsmi: 0 is normal, 1 is silent, 2 is turbo
+ */
+ u8 get_performance_level;
+ u8 set_performance_level;
+
+ /*
+ * Tell the BIOS that Linux is running on this machine.
+ * 81 is on, 80 is off
+ */
+ u8 set_linux;
+};
+
+struct sabi_performance_level {
+ const char *name;
+ u8 value;
+};
+
+struct sabi_config {
+ const char *test_string;
+ u16 main_function;
+ const struct sabi_header_offsets header_offsets;
+ const struct sabi_commands commands;
+ const struct sabi_performance_level performance_levels[4];
+ u8 min_brightness;
+ u8 max_brightness;
+};
+
+static const struct sabi_config sabi_configs[] = {
+ {
+ .test_string = "SECLINUX",
+
+ .main_function = 0x4c49,
+
+ .header_offsets = {
+ .port = 0x00,
+ .re_mem = 0x02,
+ .iface_func = 0x03,
+ .en_mem = 0x04,
+ .data_offset = 0x05,
+ .data_segment = 0x07,
+ },
+
+ .commands = {
+ .get_brightness = 0x00,
+ .set_brightness = 0x01,
+
+ .get_wireless_button = 0x02,
+ .set_wireless_button = 0x03,
+
+ .get_backlight = 0x04,
+ .set_backlight = 0x05,
+
+ .get_recovery_mode = 0x06,
+ .set_recovery_mode = 0x07,
+
+ .get_performance_level = 0x08,
+ .set_performance_level = 0x09,
+
+ .set_linux = 0x0a,
+ },
+
+ .performance_levels = {
+ {
+ .name = "silent",
+ .value = 0,
+ },
+ {
+ .name = "normal",
+ .value = 1,
+ },
+ { },
+ },
+ .min_brightness = 1,
+ .max_brightness = 8,
+ },
+ {
+ .test_string = "SwSmi@",
+
+ .main_function = 0x5843,
+
+ .header_offsets = {
+ .port = 0x00,
+ .re_mem = 0x04,
+ .iface_func = 0x02,
+ .en_mem = 0x03,
+ .data_offset = 0x05,
+ .data_segment = 0x07,
+ },
+
+ .commands = {
+ .get_brightness = 0x10,
+ .set_brightness = 0x11,
+
+ .get_wireless_button = 0x12,
+ .set_wireless_button = 0x13,
+
+ .get_backlight = 0x2d,
+ .set_backlight = 0x2e,
+
+ .get_recovery_mode = 0xff,
+ .set_recovery_mode = 0xff,
+
+ .get_performance_level = 0x31,
+ .set_performance_level = 0x32,
+
+ .set_linux = 0xff,
+ },
+
+ .performance_levels = {
+ {
+ .name = "normal",
+ .value = 0,
+ },
+ {
+ .name = "silent",
+ .value = 1,
+ },
+ {
+ .name = "overclock",
+ .value = 2,
+ },
+ { },
+ },
+ .min_brightness = 0,
+ .max_brightness = 8,
+ },
+ { },
+};
+
+static const struct sabi_config *sabi_config;
+
+static void __iomem *sabi;
+static void __iomem *sabi_iface;
+static void __iomem *f0000_segment;
+static struct backlight_device *backlight_device;
+static struct mutex sabi_mutex;
+static struct platform_device *sdev;
+static struct rfkill *rfk;
+
+static int force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force,
+ "Disable the DMI check and forces the driver to be loaded");
+
+static int debug;
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
+static int sabi_get_command(u8 command, struct sabi_retval *sretval)
+{
+ int retval = 0;
+ u16 port = readw(sabi + sabi_config->header_offsets.port);
+ u8 complete, iface_data;
+
+ mutex_lock(&sabi_mutex);
+
+ /* enable memory to be able to write to it */
+ outb(readb(sabi + sabi_config->header_offsets.en_mem), port);
+
+ /* write out the command */
+ writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
+ writew(command, sabi_iface + SABI_IFACE_SUB);
+ writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
+ outb(readb(sabi + sabi_config->header_offsets.iface_func), port);
+
+ /* write protect memory to make it safe */
+ outb(readb(sabi + sabi_config->header_offsets.re_mem), port);
+
+ /* see if the command actually succeeded */
+ complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
+ iface_data = readb(sabi_iface + SABI_IFACE_DATA);
+ if (complete != 0xaa || iface_data == 0xff) {
+ pr_warn("SABI get command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
+ command, complete, iface_data);
+ retval = -EINVAL;
+ goto exit;
+ }
+ /*
+ * Save off the data into a structure so the caller use it.
+ * Right now we only want the first 4 bytes,
+ * There are commands that need more, but not for the ones we
+ * currently care about.
+ */
+ sretval->retval[0] = readb(sabi_iface + SABI_IFACE_DATA);
+ sretval->retval[1] = readb(sabi_iface + SABI_IFACE_DATA + 1);
+ sretval->retval[2] = readb(sabi_iface + SABI_IFACE_DATA + 2);
+ sretval->retval[3] = readb(sabi_iface + SABI_IFACE_DATA + 3);
+
+exit:
+ mutex_unlock(&sabi_mutex);
+ return retval;
+
+}
+
+static int sabi_set_command(u8 command, u8 data)
+{
+ int retval = 0;
+ u16 port = readw(sabi + sabi_config->header_offsets.port);
+ u8 complete, iface_data;
+
+ mutex_lock(&sabi_mutex);
+
+ /* enable memory to be able to write to it */
+ outb(readb(sabi + sabi_config->header_offsets.en_mem), port);
+
+ /* write out the command */
+ writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
+ writew(command, sabi_iface + SABI_IFACE_SUB);
+ writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
+ writeb(data, sabi_iface + SABI_IFACE_DATA);
+ outb(readb(sabi + sabi_config->header_offsets.iface_func), port);
+
+ /* write protect memory to make it safe */
+ outb(readb(sabi + sabi_config->header_offsets.re_mem), port);
+
+ /* see if the command actually succeeded */
+ complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
+ iface_data = readb(sabi_iface + SABI_IFACE_DATA);
+ if (complete != 0xaa || iface_data == 0xff) {
+ pr_warn("SABI set command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
+ command, complete, iface_data);
+ retval = -EINVAL;
+ }
+
+ mutex_unlock(&sabi_mutex);
+ return retval;
+}
+
+static void test_backlight(void)
+{
+ struct sabi_retval sretval;
+
+ sabi_get_command(sabi_config->commands.get_backlight, &sretval);
+ printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
+
+ sabi_set_command(sabi_config->commands.set_backlight, 0);
+ printk(KERN_DEBUG "backlight should be off\n");
+
+ sabi_get_command(sabi_config->commands.get_backlight, &sretval);
+ printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
+
+ msleep(1000);
+
+ sabi_set_command(sabi_config->commands.set_backlight, 1);
+ printk(KERN_DEBUG "backlight should be on\n");
+
+ sabi_get_command(sabi_config->commands.get_backlight, &sretval);
+ printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
+}
+
+static void test_wireless(void)
+{
+ struct sabi_retval sretval;
+
+ sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
+ printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
+
+ sabi_set_command(sabi_config->commands.set_wireless_button, 0);
+ printk(KERN_DEBUG "wireless led should be off\n");
+
+ sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
+ printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
+
+ msleep(1000);
+
+ sabi_set_command(sabi_config->commands.set_wireless_button, 1);
+ printk(KERN_DEBUG "wireless led should be on\n");
+
+ sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
+ printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
+}
+
+static u8 read_brightness(void)
+{
+ struct sabi_retval sretval;
+ int user_brightness = 0;
+ int retval;
+
+ retval = sabi_get_command(sabi_config->commands.get_brightness,
+ &sretval);
+ if (!retval) {
+ user_brightness = sretval.retval[0];
+ if (user_brightness != 0)
+ user_brightness -= sabi_config->min_brightness;
+ }
+ return user_brightness;
+}
+
+static void set_brightness(u8 user_brightness)
+{
+ u8 user_level = user_brightness - sabi_config->min_brightness;
+
+ sabi_set_command(sabi_config->commands.set_brightness, user_level);
+}
+
+static int get_brightness(struct backlight_device *bd)
+{
+ return (int)read_brightness();
+}
+
+static int update_status(struct backlight_device *bd)
+{
+ set_brightness(bd->props.brightness);
+
+ if (bd->props.power == FB_BLANK_UNBLANK)
+ sabi_set_command(sabi_config->commands.set_backlight, 1);
+ else
+ sabi_set_command(sabi_config->commands.set_backlight, 0);
+ return 0;
+}
+
+static const struct backlight_ops backlight_ops = {
+ .get_brightness = get_brightness,
+ .update_status = update_status,
+};
+
+static int rfkill_set(void *data, bool blocked)
+{
+ /* Do something with blocked...*/
+ /*
+ * blocked == false is on
+ * blocked == true is off
+ */
+ if (blocked)
+ sabi_set_command(sabi_config->commands.set_wireless_button, 0);
+ else
+ sabi_set_command(sabi_config->commands.set_wireless_button, 1);
+
+ return 0;
+}
+
+static struct rfkill_ops rfkill_ops = {
+ .set_block = rfkill_set,
+};
+
+static int init_wireless(struct platform_device *sdev)
+{
+ int retval;
+
+ rfk = rfkill_alloc("samsung-wifi", &sdev->dev, RFKILL_TYPE_WLAN,
+ &rfkill_ops, NULL);
+ if (!rfk)
+ return -ENOMEM;
+
+ retval = rfkill_register(rfk);
+ if (retval) {
+ rfkill_destroy(rfk);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void destroy_wireless(void)
+{
+ rfkill_unregister(rfk);
+ rfkill_destroy(rfk);
+}
+
+static ssize_t get_performance_level(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sabi_retval sretval;
+ int retval;
+ int i;
+
+ /* Read the state */
+ retval = sabi_get_command(sabi_config->commands.get_performance_level,
+ &sretval);
+ if (retval)
+ return retval;
+
+ /* The logic is backwards, yeah, lots of fun... */
+ for (i = 0; sabi_config->performance_levels[i].name; ++i) {
+ if (sretval.retval[0] == sabi_config->performance_levels[i].value)
+ return sprintf(buf, "%s\n", sabi_config->performance_levels[i].name);
+ }
+ return sprintf(buf, "%s\n", "unknown");
+}
+
+static ssize_t set_performance_level(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ if (count >= 1) {
+ int i;
+ for (i = 0; sabi_config->performance_levels[i].name; ++i) {
+ const struct sabi_performance_level *level =
+ &sabi_config->performance_levels[i];
+ if (!strncasecmp(level->name, buf, strlen(level->name))) {
+ sabi_set_command(sabi_config->commands.set_performance_level,
+ level->value);
+ break;
+ }
+ }
+ if (!sabi_config->performance_levels[i].name)
+ return -EINVAL;
+ }
+ return count;
+}
+static DEVICE_ATTR(performance_level, S_IWUSR | S_IRUGO,
+ get_performance_level, set_performance_level);
+
+
+static int __init dmi_check_cb(const struct dmi_system_id *id)
+{
+ pr_info("found laptop model '%s'\n",
+ id->ident);
+ return 0;
+}
+
+static struct dmi_system_id __initdata samsung_dmi_table[] = {
+ {
+ .ident = "N128",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N128"),
+ DMI_MATCH(DMI_BOARD_NAME, "N128"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "N130",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N130"),
+ DMI_MATCH(DMI_BOARD_NAME, "N130"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "X125",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X125"),
+ DMI_MATCH(DMI_BOARD_NAME, "X125"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "X120/X170",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X120/X170"),
+ DMI_MATCH(DMI_BOARD_NAME, "X120/X170"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "NC10",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
+ DMI_MATCH(DMI_BOARD_NAME, "NC10"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "NP-Q45",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
+ DMI_MATCH(DMI_BOARD_NAME, "SQ45S70S"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "X360",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X360"),
+ DMI_MATCH(DMI_BOARD_NAME, "X360"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "R518",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "R518"),
+ DMI_MATCH(DMI_BOARD_NAME, "R518"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "R519/R719",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "R519/R719"),
+ DMI_MATCH(DMI_BOARD_NAME, "R519/R719"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "N150/N210/N220",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"),
+ DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "N150P/N210P/N220P",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N150P/N210P/N220P"),
+ DMI_MATCH(DMI_BOARD_NAME, "N150P/N210P/N220P"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "R530/R730",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "R530/R730"),
+ DMI_MATCH(DMI_BOARD_NAME, "R530/R730"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "NF110/NF210/NF310",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"),
+ DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "N145P/N250P/N260P",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"),
+ DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "R70/R71",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "R70/R71"),
+ DMI_MATCH(DMI_BOARD_NAME, "R70/R71"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "P460",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P460"),
+ DMI_MATCH(DMI_BOARD_NAME, "P460"),
+ },
+ .callback = dmi_check_cb,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);
+
+static int find_signature(void __iomem *memcheck, const char *testStr)
+{
+ int i = 0;
+ int loca;
+
+ for (loca = 0; loca < 0xffff; loca++) {
+ char temp = readb(memcheck + loca);
+
+ if (temp == testStr[i]) {
+ if (i == strlen(testStr)-1)
+ break;
+ ++i;
+ } else {
+ i = 0;
+ }
+ }
+ return loca;
+}
+
+static int __init samsung_init(void)
+{
+ struct backlight_properties props;
+ struct sabi_retval sretval;
+ unsigned int ifaceP;
+ int i;
+ int loca;
+ int retval;
+
+ mutex_init(&sabi_mutex);
+
+ if (!force && !dmi_check_system(samsung_dmi_table))
+ return -ENODEV;
+
+ f0000_segment = ioremap_nocache(0xf0000, 0xffff);
+ if (!f0000_segment) {
+ pr_err("Can't map the segment at 0xf0000\n");
+ return -EINVAL;
+ }
+
+ /* Try to find one of the signatures in memory to find the header */
+ for (i = 0; sabi_configs[i].test_string != 0; ++i) {
+ sabi_config = &sabi_configs[i];
+ loca = find_signature(f0000_segment, sabi_config->test_string);
+ if (loca != 0xffff)
+ break;
+ }
+
+ if (loca == 0xffff) {
+ pr_err("This computer does not support SABI\n");
+ goto error_no_signature;
+ }
+
+ /* point to the SMI port Number */
+ loca += 1;
+ sabi = (f0000_segment + loca);
+
+ if (debug) {
+ printk(KERN_DEBUG "This computer supports SABI==%x\n",
+ loca + 0xf0000 - 6);
+ printk(KERN_DEBUG "SABI header:\n");
+ printk(KERN_DEBUG " SMI Port Number = 0x%04x\n",
+ readw(sabi + sabi_config->header_offsets.port));
+ printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n",
+ readb(sabi + sabi_config->header_offsets.iface_func));
+ printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n",
+ readb(sabi + sabi_config->header_offsets.en_mem));
+ printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n",
+ readb(sabi + sabi_config->header_offsets.re_mem));
+ printk(KERN_DEBUG " SABI data offset = 0x%04x\n",
+ readw(sabi + sabi_config->header_offsets.data_offset));
+ printk(KERN_DEBUG " SABI data segment = 0x%04x\n",
+ readw(sabi + sabi_config->header_offsets.data_segment));
+ }
+
+ /* Get a pointer to the SABI Interface */
+ ifaceP = (readw(sabi + sabi_config->header_offsets.data_segment) & 0x0ffff) << 4;
+ ifaceP += readw(sabi + sabi_config->header_offsets.data_offset) & 0x0ffff;
+ sabi_iface = ioremap_nocache(ifaceP, 16);
+ if (!sabi_iface) {
+ pr_err("Can't remap %x\n", ifaceP);
+ goto exit;
+ }
+ if (debug) {
+ printk(KERN_DEBUG "ifaceP = 0x%08x\n", ifaceP);
+ printk(KERN_DEBUG "sabi_iface = %p\n", sabi_iface);
+
+ test_backlight();
+ test_wireless();
+
+ retval = sabi_get_command(sabi_config->commands.get_brightness,
+ &sretval);
+ printk(KERN_DEBUG "brightness = 0x%02x\n", sretval.retval[0]);
+ }
+
+ /* Turn on "Linux" mode in the BIOS */
+ if (sabi_config->commands.set_linux != 0xff) {
+ retval = sabi_set_command(sabi_config->commands.set_linux,
+ 0x81);
+ if (retval) {
+ pr_warn("Linux mode was not set!\n");
+ goto error_no_platform;
+ }
+ }
+
+ /* knock up a platform device to hang stuff off of */
+ sdev = platform_device_register_simple("samsung", -1, NULL, 0);
+ if (IS_ERR(sdev))
+ goto error_no_platform;
+
+ /* create a backlight device to talk to this one */
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.max_brightness = sabi_config->max_brightness;
+ backlight_device = backlight_device_register("samsung", &sdev->dev,
+ NULL, &backlight_ops,
+ &props);
+ if (IS_ERR(backlight_device))
+ goto error_no_backlight;
+
+ backlight_device->props.brightness = read_brightness();
+ backlight_device->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(backlight_device);
+
+ retval = init_wireless(sdev);
+ if (retval)
+ goto error_no_rfk;
+
+ retval = device_create_file(&sdev->dev, &dev_attr_performance_level);
+ if (retval)
+ goto error_file_create;
+
+exit:
+ return 0;
+
+error_file_create:
+ destroy_wireless();
+
+error_no_rfk:
+ backlight_device_unregister(backlight_device);
+
+error_no_backlight:
+ platform_device_unregister(sdev);
+
+error_no_platform:
+ iounmap(sabi_iface);
+
+error_no_signature:
+ iounmap(f0000_segment);
+ return -EINVAL;
+}
+
+static void __exit samsung_exit(void)
+{
+ /* Turn off "Linux" mode in the BIOS */
+ if (sabi_config->commands.set_linux != 0xff)
+ sabi_set_command(sabi_config->commands.set_linux, 0x80);
+
+ device_remove_file(&sdev->dev, &dev_attr_performance_level);
+ backlight_device_unregister(backlight_device);
+ destroy_wireless();
+ iounmap(sabi_iface);
+ iounmap(f0000_segment);
+ platform_device_unregister(sdev);
+}
+
+module_init(samsung_init);
+module_exit(samsung_exit);
+
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>");
+MODULE_DESCRIPTION("Samsung Backlight driver");
+MODULE_LICENSE("GPL");
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff