[ARM] pxa/spitz: Rework spitz
authorMarek Vasut <marek.vasut@gmail.com>
Mon, 14 Jun 2010 14:12:03 +0000 (16:12 +0200)
committerEric Miao <eric.y.miao@gmail.com>
Thu, 5 Aug 2010 06:32:41 +0000 (14:32 +0800)
This huge patch mostly shuffles code. The spitz.c file contained terrible mess
and needed a cleanup, here it is:

1) Made every part modular, components are not built in if not selected.
2) Removed loads of preprocessor goo, mostly "#ifdef MACH_AKITA .... #endif" and
   similar code. The kernel size will grow by a few kb now, but the file is much
   more readable.
3) Reworked SD/CF power setting function and made it reentrant.
4) Add ISL6271A regulator support
5) Correctly register WM8750

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
arch/arm/mach-pxa/include/mach/spitz.h
arch/arm/mach-pxa/spitz.c

index dc1ff254229e8b64c78e564bd7d78abddb7750e9..685749a51c4284159324bee89c7a5e96e7404da2 100644 (file)
 #define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
 #define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
 #define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device spitzssp_device;
+extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
index 5153bf3b898500137577fba632ccd80d94481597..24c4d271b219313d14ae207def47210d65d65a81 100644 (file)
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
+#include <linux/mtd/physmap.h>
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
 
-
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
-#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/spitz.h>
 #include <mach/sharpsl_pm.h>
 
+#include <plat/i2c.h>
+
 #include "generic.h"
 #include "devices.h"
 
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
 static unsigned long spitz_pin_config[] __initdata = {
        /* Chip Selects */
        GPIO78_nCS_2,   /* SCOOP #2 */
@@ -124,6 +128,11 @@ static unsigned long spitz_pin_config[] __initdata = {
        GPIO1_GPIO | WAKEUP_ON_EDGE_FALL,       /* SPITZ_GPIO_RESET */
 };
 
+
+/******************************************************************************
+ * Scoop GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE)
 /*
  * Spitz SCOOP Device #1
  */
@@ -182,43 +191,60 @@ struct platform_device spitzscoop2_device = {
        .resource       = spitz_scoop2_resources,
 };
 
-#define SPITZ_PWR_SD 0x01
-#define SPITZ_PWR_CF 0x02
+static void __init spitz_scoop_init(void)
+{
+       platform_device_register(&spitz_scoop1_device);
+
+       /* Akita doesn't have the second SCOOP chip */
+       if (!machine_is_akita())
+               platform_device_register(&spitzscoop2_device);
+}
 
 /* Power control is shared with between one of the CF slots and SD */
-static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
+static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
 {
-       unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
+       unsigned short cpr;
+       unsigned long flags;
 
-       if (new_cpr & 0x0007) {
+       if (new_cpr & 0x7) {
                gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
-               if (!(cpr & 0x0002) && !(cpr & 0x0004))
-                       mdelay(5);
-               if (device == SPITZ_PWR_CF)
-                       cpr |= 0x0002;
-               if (device == SPITZ_PWR_SD)
-                       cpr |= 0x0004;
-               write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
-       } else {
-               if (device == SPITZ_PWR_CF)
-                       cpr &= ~0x0002;
-               if (device == SPITZ_PWR_SD)
-                       cpr &= ~0x0004;
-               if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
-                       write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
-                       mdelay(1);
-                       gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
-               } else {
-                       write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
-               }
+               mdelay(5);
+       }
+
+       local_irq_save(flags);
+
+       cpr = read_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR);
+
+       if (enable & new_cpr)
+               cpr |= new_cpr;
+       else
+               cpr &= ~enable;
+
+       write_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR, cpr);
+
+       local_irq_restore(flags);
+
+       if (!(cpr & 0x7)) {
+               mdelay(1);
+               gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
        }
 }
 
-static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
+#else
+static inline void spitz_scoop_init(void) {}
+static inline void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) {}
+#endif
+
+/******************************************************************************
+ * PCMCIA
+ ******************************************************************************/
+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr)
 {
        /* Only need to override behaviour for slot 0 */
        if (nr == 0)
-               spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr);
+               spitz_card_pwr_ctrl(
+                       cpr & (SCOOP_CPR_CF_3V | SCOOP_CPR_CF_XV), cpr);
        else
                write_scoop_reg(scoop, SCOOP_CPR, cpr);
 }
@@ -242,9 +268,23 @@ static struct scoop_pcmcia_config spitz_pcmcia_config = {
        .power_ctrl   = spitz_pcmcia_pwr,
 };
 
-/*
- * Spitz Keyboard Device
- */
+static void __init spitz_pcmcia_init(void)
+{
+       /* Akita has only one PCMCIA slot used */
+       if (machine_is_akita())
+               spitz_pcmcia_config.num_devs = 1;
+
+       platform_scoop_config = &spitz_pcmcia_config;
+}
+#else
+static inline void spitz_pcmcia_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
+
 #define SPITZ_KEY_CALENDAR     KEY_F1
 #define SPITZ_KEY_ADDRESS      KEY_F2
 #define SPITZ_KEY_FN           KEY_F3
@@ -356,7 +396,18 @@ static struct platform_device spitzkbd_device = {
        },
 };
 
+static void __init spitz_mkp_init(void)
+{
+       platform_device_register(&spitzkbd_device);
+}
+#else
+static inline void spitz_mkp_init(void) {}
+#endif
 
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button spitz_gpio_keys[] = {
        {
                .type   = EV_PWR,
@@ -393,10 +444,18 @@ static struct platform_device spitz_gpio_keys_device = {
        },
 };
 
+static void __init spitz_keys_init(void)
+{
+       platform_device_register(&spitz_gpio_keys_device);
+}
+#else
+static inline void spitz_keys_init(void) {}
+#endif
 
-/*
- * Spitz LEDs
- */
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led spitz_gpio_leds[] = {
        {
                .name                   = "spitz:amber:charge",
@@ -423,11 +482,18 @@ static struct platform_device spitzled_device = {
        },
 };
 
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master spitz_spi_info = {
-       .num_chipselect = 3,
-};
+static void __init spitz_leds_init(void)
+{
+       platform_device_register(&spitzled_device);
+}
+#else
+static inline void spitz_leds_init(void) {}
+#endif
 
+/******************************************************************************
+ * SSP Devices
+ ******************************************************************************/
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
 static void spitz_wait_for_hsync(void)
 {
        while (gpio_get_value(SPITZ_GPIO_HSYNC))
@@ -505,11 +571,17 @@ static struct spi_board_info spitz_spi_devices[] = {
        },
 };
 
+static struct pxa2xx_spi_master spitz_spi_info = {
+       .num_chipselect = 3,
+};
+
 static void __init spitz_init_spi(void)
 {
+       struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
+
        if (machine_is_akita()) {
-               spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
-               spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+               lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+               lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
        }
 
        pxa2xx_set_spi_info(2, &spitz_spi_info);
@@ -519,20 +591,22 @@ static void __init spitz_init_spi(void)
 static inline void spitz_init_spi(void) {}
 #endif
 
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 /*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
+ * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
+ * give the card a chance to fully insert/eject.
  */
 static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
        struct pxamci_platform_data* p_d = dev->platform_data;
 
-       if (( 1 << vdd) & p_d->ocr_mask)
-               spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004);
+       if ((1 << vdd) & p_d->ocr_mask)
+               spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
        else
-               spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
+               spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
@@ -544,10 +618,18 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
        .gpio_power             = -1,
 };
 
+static void __init spitz_mmc_init(void)
+{
+       pxa_set_mci_info(&spitz_mci_platform_data);
+}
+#else
+static inline void spitz_mmc_init(void) {}
+#endif
 
-/*
- * USB Host (OHCI)
- */
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int spitz_ohci_init(struct device *dev)
 {
        int err;
@@ -556,9 +638,7 @@ static int spitz_ohci_init(struct device *dev)
        if (err)
                return err;
 
-       /* Only Port 2 is connected
-        * Setup USB Port 2 Output Control Register
-        */
+       /* Only Port 2 is connected, setup USB Port 2 Output Control Register */
        UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
 
        return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
@@ -577,21 +657,39 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
        .power_budget   = 150,
 };
 
+static void __init spitz_uhc_init(void)
+{
+       pxa_set_ohci_info(&spitz_ohci_platform_data);
+}
+#else
+static inline void spitz_uhc_init(void) {}
+#endif
 
-/*
- * Irda
- */
-
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
-/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */
        .transceiver_cap        = IR_SIRMODE | IR_OFF,
 };
 
+static void __init spitz_irda_init(void)
+{
+       if (machine_is_akita())
+               spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
+       else
+               spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
 
-/*
- * Spitz PXA Framebuffer
- */
+       pxa_set_ficp_info(&spitz_ficp_platform_data);
+}
+#else
+static inline void spitz_irda_init(void) {}
+#endif
 
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info spitz_pxafb_modes[] = {
 {
        .pixclock       = 19231,
@@ -621,12 +719,24 @@ static struct pxafb_mode_info spitz_pxafb_modes[] = {
 };
 
 static struct pxafb_mach_info spitz_pxafb_info = {
-       .modes          = &spitz_pxafb_modes[0],
-       .num_modes      = 2,
+       .modes          = spitz_pxafb_modes,
+       .num_modes      = ARRAY_SIZE(spitz_pxafb_modes),
        .fixed_modes    = 1,
        .lcd_conn       = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
 };
 
+static void __init spitz_lcd_init(void)
+{
+       set_pxa_fb_info(&spitz_pxafb_info);
+}
+#else
+static inline void spitz_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
 static struct mtd_partition sharpsl_nand_partitions[] = {
        {
                .name = "System Area",
@@ -653,6 +763,16 @@ static struct nand_bbt_descr sharpsl_bbt = {
        .pattern = scan_ff_pattern
 };
 
+static struct nand_ecclayout spitz_akita_oobinfo = {
+       .oobfree        = { {0x08, 0x09} },
+       .eccbytes       = 24,
+       .eccpos         = {
+                       0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11,
+                       0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+                       0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37,
+       },
+};
+
 static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
        .badblock_pattern       = &sharpsl_bbt,
        .partitions             = sharpsl_nand_partitions,
@@ -661,8 +781,8 @@ static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
 
 static struct resource sharpsl_nand_resources[] = {
        {
-               .start  = 0x0C000000,
-               .end    = 0x0C000FFF,
+               .start  = PXA_CS3_PHYS,
+               .end    = PXA_CS3_PHYS + SZ_4K - 1,
                .flags  = IORESOURCE_MEM,
        },
 };
@@ -672,10 +792,35 @@ static struct platform_device sharpsl_nand_device = {
        .id             = -1,
        .resource       = sharpsl_nand_resources,
        .num_resources  = ARRAY_SIZE(sharpsl_nand_resources),
-       .dev.platform_data      = &sharpsl_nand_platform_data,
+       .dev            = {
+               .platform_data  = &sharpsl_nand_platform_data,
+       }
 };
 
+static void __init spitz_nand_init(void)
+{
+       if (machine_is_spitz()) {
+               sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
+       } else if (machine_is_akita()) {
+               sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
+               sharpsl_nand_bbt.len = 1;
+               sharpsl_nand_pdata.ecc_layout = &spitz_akita_oobinfo;
+       } else if (machine_is_borzoi()) {
+               sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
+               sharpsl_nand_bbt.len = 1;
+               sharpsl_nand_pdata.ecc_layout = &spitz_akita_oobinfo;
+       }
+
+       platform_device_register(&sharpsl_nand_device);
+}
+#else
+static inline void spitz_nand_init(void) {}
+#endif
 
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition sharpsl_rom_parts[] = {
        {
                .name   ="Boot PROM Filesystem",
@@ -692,8 +837,8 @@ static struct physmap_flash_data sharpsl_rom_data = {
 
 static struct resource sharpsl_rom_resources[] = {
        {
-               .start  = 0x00000000,
-               .end    = 0x007fffff,
+               .start  = PXA_CS0_PHYS,
+               .end    = PXA_CS0_PHYS + SZ_8M - 1,
                .flags  = IORESOURCE_MEM,
        },
 };
@@ -703,18 +848,86 @@ static struct platform_device sharpsl_rom_device = {
        .id     = -1,
        .resource = sharpsl_rom_resources,
        .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-       .dev.platform_data = &sharpsl_rom_data,
+       .dev            = {
+               .platform_data  = &sharpsl_rom_data,
+       },
+};
+
+static void __init spitz_nor_init(void)
+{
+       platform_device_register(&sharpsl_rom_device);
+}
+#else
+static inline void spitz_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct pca953x_platform_data akita_pca953x_pdata = {
+       .gpio_base              = AKITA_IOEXP_GPIO_BASE,
+};
+
+static struct i2c_board_info spitz_i2c_devs[] = {
+       {
+               .type           = "wm8750",
+               .addr           = 0x1b,
+       }, {
+               .type           = "max7310",
+               .addr           = 0x18,
+               .platform_data  = &akita_pca953x_pdata,
+       },
+};
+
+static struct regulator_consumer_supply isl6271a_consumers[] = {
+       {
+               .supply = "vcc_core",
+       }
 };
 
-static struct platform_device *devices[] __initdata = {
-       &spitzscoop_device,
-       &spitzkbd_device,
-       &spitz_gpio_keys_device,
-       &spitzled_device,
-       &sharpsl_nand_device,
-       &sharpsl_rom_device,
+static struct regulator_init_data isl6271a_info[] = {
+       {
+               .constraints = {
+                       .name           = "vcc_core range",
+                       .min_uV         = 850000,
+                       .max_uV         = 1600000,
+                       .always_on      = 1,
+                       .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+               },
+       .consumer_supplies      = isl6271a_consumers,
+       .num_consumer_supplies  = ARRAY_SIZE(isl6271a_consumers),
+       }
 };
 
+static struct i2c_board_info spitz_pi2c_devs[] = {
+       {
+               .type           = "isl6271a",
+               .addr           = 0x0c,
+               .platform_data  = &isl6271a_info,
+       },
+};
+
+static void __init spitz_i2c_init(void)
+{
+       int size = ARRAY_SIZE(spitz_i2c_devs);
+
+       /* Only Akita has the max7310 chip */
+       if (!machine_is_akita())
+               size--;
+
+       pxa_set_i2c_info(NULL);
+       pxa27x_set_i2c_power_info(NULL);
+       i2c_register_board_info(0, spitz_i2c_devs, size);
+       i2c_register_board_info(1, ARRAY_AND_SIZE(spitz_pi2c_devs));
+}
+#else
+static inline void spitz_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
 static void spitz_poweroff(void)
 {
        arm_machine_restart('g', NULL);
@@ -723,26 +936,18 @@ static void spitz_poweroff(void)
 static void spitz_restart(char mode, const char *cmd)
 {
        /* Bootloader magic for a reboot */
-       if((MSC0 & 0xffff0000) == 0x7ff00000)
+       if ((MSC0 & 0xffff0000) == 0x7ff00000)
                MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
 
        spitz_poweroff();
 }
 
-static void __init common_init(void)
+static void __init spitz_init(void)
 {
        init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
        pm_power_off = spitz_poweroff;
        arm_pm_restart = spitz_restart;
 
-       if (machine_is_spitz()) {
-               sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
-       } else if (machine_is_akita()) {
-               sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
-       } else if (machine_is_borzoi()) {
-               sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
-       }
-
        PMCR = 0x00;
 
        /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
@@ -755,88 +960,19 @@ static void __init common_init(void)
        pxa_set_stuart_info(NULL);
 
        spitz_init_spi();
-
-       platform_add_devices(devices, ARRAY_SIZE(devices));
-       pxa_set_mci_info(&spitz_mci_platform_data);
-       pxa_set_ohci_info(&spitz_ohci_platform_data);
-       pxa_set_ficp_info(&spitz_ficp_platform_data);
-       set_pxa_fb_info(&spitz_pxafb_info);
-       pxa_set_i2c_info(NULL);
-}
-
-#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI)
-static struct nand_bbt_descr sharpsl_akita_bbt = {
-       .options = 0,
-       .offs = 4,
-       .len = 1,
-       .pattern = scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
-       .eccbytes = 24,
-       .eccpos = {
-                  0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
-                  0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-                  0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
-       .oobfree = {{0x08, 0x09}}
-};
-#endif
-
-#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-static void __init spitz_init(void)
-{
-       spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-
-#ifdef CONFIG_MACH_BORZOI
-       if (machine_is_borzoi()) {
-               sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
-               sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
-       }
-#endif
-
-       platform_scoop_config = &spitz_pcmcia_config;
-
-       common_init();
-
-       platform_device_register(&spitzscoop2_device);
-}
-#endif
-
-#ifdef CONFIG_MACH_AKITA
-/*
- * Akita IO Expander
- */
-static struct pca953x_platform_data akita_ioexp = {
-       .gpio_base              = AKITA_IOEXP_GPIO_BASE,
-};
-
-static struct i2c_board_info akita_i2c_board_info[] = {
-       {
-               .type           = "max7310",
-               .addr           = 0x18,
-               .platform_data  = &akita_ioexp,
-       }, {
-               .type           = "wm8750",
-               .addr           = 0x1b,
-       },
-};
-
-static void __init akita_init(void)
-{
-       spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
-
-       sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
-       sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
-
-       /* We just pretend the second element of the array doesn't exist */
-       spitz_pcmcia_config.num_devs = 1;
-       platform_scoop_config = &spitz_pcmcia_config;
-
-       i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
-
-       common_init();
+       spitz_scoop_init();
+       spitz_mkp_init();
+       spitz_keys_init();
+       spitz_leds_init();
+       spitz_mmc_init();
+       spitz_pcmcia_init();
+       spitz_irda_init();
+       spitz_uhc_init();
+       spitz_lcd_init();
+       spitz_nor_init();
+       spitz_nand_init();
+       spitz_i2c_init();
 }
-#endif
 
 static void __init fixup_spitz(struct machine_desc *desc,
                struct tag *tags, char **cmdline, struct meminfo *mi)
@@ -879,7 +1015,7 @@ MACHINE_START(AKITA, "SHARP Akita")
        .fixup          = fixup_spitz,
        .map_io         = pxa_map_io,
        .init_irq       = pxa27x_init_irq,
-       .init_machine   = akita_init,
+       .init_machine   = spitz_init,
        .timer          = &pxa_timer,
 MACHINE_END
 #endif