--- /dev/null
+/*
+ * Boot code and exception vectors for Book3E processors
+ *
+ * Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/setup.h>
+#include <asm/thread_info.h>
+#include <asm/reg.h>
+#include <asm/exception-64e.h>
+#include <asm/bug.h>
+#include <asm/irqflags.h>
+#include <asm/ptrace.h>
+#include <asm/ppc-opcode.h>
+#include <asm/mmu.h>
+
+/* XXX This will ultimately add space for a special exception save
+ * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
+ * when taking special interrupts. For now we don't support that,
+ * special interrupts from within a non-standard level will probably
+ * blow you up
+ */
+#define SPECIAL_EXC_FRAME_SIZE INT_FRAME_SIZE
+
+/* Exception prolog code for all exceptions */
+#define EXCEPTION_PROLOG(n, type, addition) \
+ mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \
+ mfspr r13,SPRN_SPRG_PACA; /* get PACA */ \
+ std r10,PACA_EX##type+EX_R10(r13); \
+ std r11,PACA_EX##type+EX_R11(r13); \
+ mfcr r10; /* save CR */ \
+ addition; /* additional code for that exc. */ \
+ std r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */ \
+ stw r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \
+ mfspr r11,SPRN_##type##_SRR1;/* what are we coming from */ \
+ type##_SET_KSTACK; /* get special stack if necessary */\
+ andi. r10,r11,MSR_PR; /* save stack pointer */ \
+ beq 1f; /* branch around if supervisor */ \
+ ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\
+1: cmpdi cr1,r1,0; /* check if SP makes sense */ \
+ bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \
+ mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */
+
+/* Exception type-specific macros */
+#define GEN_SET_KSTACK \
+ subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */
+#define SPRN_GEN_SRR0 SPRN_SRR0
+#define SPRN_GEN_SRR1 SPRN_SRR1
+
+#define CRIT_SET_KSTACK \
+ ld r1,PACA_CRIT_STACK(r13); \
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_CRIT_SRR0 SPRN_CSRR0
+#define SPRN_CRIT_SRR1 SPRN_CSRR1
+
+#define DBG_SET_KSTACK \
+ ld r1,PACA_DBG_STACK(r13); \
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_DBG_SRR0 SPRN_DSRR0
+#define SPRN_DBG_SRR1 SPRN_DSRR1
+
+#define MC_SET_KSTACK \
+ ld r1,PACA_MC_STACK(r13); \
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_MC_SRR0 SPRN_MCSRR0
+#define SPRN_MC_SRR1 SPRN_MCSRR1
+
+#define NORMAL_EXCEPTION_PROLOG(n, addition) \
+ EXCEPTION_PROLOG(n, GEN, addition##_GEN)
+
+#define CRIT_EXCEPTION_PROLOG(n, addition) \
+ EXCEPTION_PROLOG(n, CRIT, addition##_CRIT)
+
+#define DBG_EXCEPTION_PROLOG(n, addition) \
+ EXCEPTION_PROLOG(n, DBG, addition##_DBG)
+
+#define MC_EXCEPTION_PROLOG(n, addition) \
+ EXCEPTION_PROLOG(n, MC, addition##_MC)
+
+
+/* Variants of the "addition" argument for the prolog
+ */
+#define PROLOG_ADDITION_NONE_GEN
+#define PROLOG_ADDITION_NONE_CRIT
+#define PROLOG_ADDITION_NONE_DBG
+#define PROLOG_ADDITION_NONE_MC
+
+#define PROLOG_ADDITION_MASKABLE_GEN \
+ lbz r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \
+ cmpwi cr0,r11,0; /* yes -> go out of line */ \
+ beq masked_interrupt_book3e;
+
+#define PROLOG_ADDITION_2REGS_GEN \
+ std r14,PACA_EXGEN+EX_R14(r13); \
+ std r15,PACA_EXGEN+EX_R15(r13)
+
+#define PROLOG_ADDITION_1REG_GEN \
+ std r14,PACA_EXGEN+EX_R14(r13);
+
+#define PROLOG_ADDITION_2REGS_CRIT \
+ std r14,PACA_EXCRIT+EX_R14(r13); \
+ std r15,PACA_EXCRIT+EX_R15(r13)
+
+#define PROLOG_ADDITION_2REGS_DBG \
+ std r14,PACA_EXDBG+EX_R14(r13); \
+ std r15,PACA_EXDBG+EX_R15(r13)
+
+#define PROLOG_ADDITION_2REGS_MC \
+ std r14,PACA_EXMC+EX_R14(r13); \
+ std r15,PACA_EXMC+EX_R15(r13)
+
+/* Core exception code for all exceptions except TLB misses.
+ * XXX: Needs to make SPRN_SPRG_GEN depend on exception type
+ */
+#define EXCEPTION_COMMON(n, excf, ints) \
+ std r0,GPR0(r1); /* save r0 in stackframe */ \
+ std r2,GPR2(r1); /* save r2 in stackframe */ \
+ SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
+ SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
+ std r9,GPR9(r1); /* save r9 in stackframe */ \
+ std r10,_NIP(r1); /* save SRR0 to stackframe */ \
+ std r11,_MSR(r1); /* save SRR1 to stackframe */ \
+ ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */ \
+ ld r3,excf+EX_R10(r13); /* get back r10 */ \
+ ld r4,excf+EX_R11(r13); /* get back r11 */ \
+ mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 */ \
+ std r12,GPR12(r1); /* save r12 in stackframe */ \
+ ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
+ mflr r6; /* save LR in stackframe */ \
+ mfctr r7; /* save CTR in stackframe */ \
+ mfspr r8,SPRN_XER; /* save XER in stackframe */ \
+ ld r9,excf+EX_R1(r13); /* load orig r1 back from PACA */ \
+ lwz r10,excf+EX_CR(r13); /* load orig CR back from PACA */ \
+ lbz r11,PACASOFTIRQEN(r13); /* get current IRQ softe */ \
+ ld r12,exception_marker@toc(r2); \
+ li r0,0; \
+ std r3,GPR10(r1); /* save r10 to stackframe */ \
+ std r4,GPR11(r1); /* save r11 to stackframe */ \
+ std r5,GPR13(r1); /* save it to stackframe */ \
+ std r6,_LINK(r1); \
+ std r7,_CTR(r1); \
+ std r8,_XER(r1); \
+ li r3,(n)+1; /* indicate partial regs in trap */ \
+ std r9,0(r1); /* store stack frame back link */ \
+ std r10,_CCR(r1); /* store orig CR in stackframe */ \
+ std r9,GPR1(r1); /* store stack frame back link */ \
+ std r11,SOFTE(r1); /* and save it to stackframe */ \
+ std r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \
+ std r3,_TRAP(r1); /* set trap number */ \
+ std r0,RESULT(r1); /* clear regs->result */ \
+ ints;
+
+/* Variants for the "ints" argument */
+#define INTS_KEEP
+#define INTS_DISABLE_SOFT \
+ stb r0,PACASOFTIRQEN(r13); /* mark interrupts soft-disabled */ \
+ TRACE_DISABLE_INTS;
+#define INTS_DISABLE_HARD \
+ stb r0,PACAHARDIRQEN(r13); /* and hard disabled */
+#define INTS_DISABLE_ALL \
+ INTS_DISABLE_SOFT \
+ INTS_DISABLE_HARD
+
+/* This is called by exceptions that used INTS_KEEP (that is did not clear
+ * neither soft nor hard IRQ indicators in the PACA. This will restore MSR:EE
+ * to it's previous value
+ *
+ * XXX In the long run, we may want to open-code it in order to separate the
+ * load from the wrtee, thus limiting the latency caused by the dependency
+ * but at this point, I'll favor code clarity until we have a near to final
+ * implementation
+ */
+#define INTS_RESTORE_HARD \
+ ld r11,_MSR(r1); \
+ wrtee r11;
+
+/* XXX FIXME: Restore r14/r15 when necessary */
+#define BAD_STACK_TRAMPOLINE(n) \
+exc_##n##_bad_stack: \
+ li r1,(n); /* get exception number */ \
+ sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \
+ b bad_stack_book3e; /* bad stack error */
+
+#define EXCEPTION_STUB(loc, label) \
+ . = interrupt_base_book3e + loc; \
+ nop; /* To make debug interrupts happy */ \
+ b exc_##label##_book3e;
+
+#define ACK_NONE(r)
+#define ACK_DEC(r) \
+ lis r,TSR_DIS@h; \
+ mtspr SPRN_TSR,r
+#define ACK_FIT(r) \
+ lis r,TSR_FIS@h; \
+ mtspr SPRN_TSR,r
+
+#define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack) \
+ START_EXCEPTION(label); \
+ NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE) \
+ EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL) \
+ ack(r8); \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ bl hdlr; \
+ b .ret_from_except_lite;
+
+/* This value is used to mark exception frames on the stack. */
+ .section ".toc","aw"
+exception_marker:
+ .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
+
+
+/*
+ * And here we have the exception vectors !
+ */
+
+ .text
+ .balign 0x1000
+ .globl interrupt_base_book3e
+interrupt_base_book3e: /* fake trap */
+ /* Note: If real debug exceptions are supported by the HW, the vector
+ * below will have to be patched up to point to an appropriate handler
+ */
+ EXCEPTION_STUB(0x000, machine_check) /* 0x0200 */
+ EXCEPTION_STUB(0x020, critical_input) /* 0x0580 */
+ EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */
+ EXCEPTION_STUB(0x060, data_storage) /* 0x0300 */
+ EXCEPTION_STUB(0x080, instruction_storage) /* 0x0400 */
+ EXCEPTION_STUB(0x0a0, external_input) /* 0x0500 */
+ EXCEPTION_STUB(0x0c0, alignment) /* 0x0600 */
+ EXCEPTION_STUB(0x0e0, program) /* 0x0700 */
+ EXCEPTION_STUB(0x100, fp_unavailable) /* 0x0800 */
+ EXCEPTION_STUB(0x120, system_call) /* 0x0c00 */
+ EXCEPTION_STUB(0x140, ap_unavailable) /* 0x0f20 */
+ EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */
+ EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */
+ EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */
+ EXCEPTION_STUB(0x1c0, data_tlb_miss)
+ EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
+
+#if 0
+ EXCEPTION_STUB(0x280, processor_doorbell)
+ EXCEPTION_STUB(0x220, processor_doorbell_crit)
+#endif
+ .globl interrupt_end_book3e
+interrupt_end_book3e:
+
+/* Critical Input Interrupt */
+ START_EXCEPTION(critical_input);
+ CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE)
+// EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL)
+// bl special_reg_save_crit
+// addi r3,r1,STACK_FRAME_OVERHEAD
+// bl .critical_exception
+// b ret_from_crit_except
+ b .
+
+/* Machine Check Interrupt */
+ START_EXCEPTION(machine_check);
+ CRIT_EXCEPTION_PROLOG(0x200, PROLOG_ADDITION_NONE)
+// EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL)
+// bl special_reg_save_mc
+// addi r3,r1,STACK_FRAME_OVERHEAD
+// bl .machine_check_exception
+// b ret_from_mc_except
+ b .
+
+/* Data Storage Interrupt */
+ START_EXCEPTION(data_storage)
+ NORMAL_EXCEPTION_PROLOG(0x300, PROLOG_ADDITION_2REGS)
+ mfspr r14,SPRN_DEAR
+ mfspr r15,SPRN_ESR
+ EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_KEEP)
+ b storage_fault_common
+
+/* Instruction Storage Interrupt */
+ START_EXCEPTION(instruction_storage);
+ NORMAL_EXCEPTION_PROLOG(0x400, PROLOG_ADDITION_2REGS)
+ li r15,0
+ mr r14,r10
+ EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_KEEP)
+ b storage_fault_common
+
+/* External Input Interrupt */
+ MASKABLE_EXCEPTION(0x500, external_input, .do_IRQ, ACK_NONE)
+
+/* Alignment */
+ START_EXCEPTION(alignment);
+ NORMAL_EXCEPTION_PROLOG(0x600, PROLOG_ADDITION_2REGS)
+ mfspr r14,SPRN_DEAR
+ mfspr r15,SPRN_ESR
+ EXCEPTION_COMMON(0x600, PACA_EXGEN, INTS_KEEP)
+ b alignment_more /* no room, go out of line */
+
+/* Program Interrupt */
+ START_EXCEPTION(program);
+ NORMAL_EXCEPTION_PROLOG(0x700, PROLOG_ADDITION_1REG)
+ mfspr r14,SPRN_ESR
+ EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE_SOFT)
+ std r14,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ld r14,PACA_EXGEN+EX_R14(r13)
+ bl .save_nvgprs
+ INTS_RESTORE_HARD
+ bl .program_check_exception
+ b .ret_from_except
+
+/* Floating Point Unavailable Interrupt */
+ START_EXCEPTION(fp_unavailable);
+ NORMAL_EXCEPTION_PROLOG(0x800, PROLOG_ADDITION_NONE)
+ /* we can probably do a shorter exception entry for that one... */
+ EXCEPTION_COMMON(0x800, PACA_EXGEN, INTS_KEEP)
+ bne 1f /* if from user, just load it up */
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ INTS_RESTORE_HARD
+ bl .kernel_fp_unavailable_exception
+ BUG_OPCODE
+1: ld r12,_MSR(r1)
+ bl .load_up_fpu
+ b fast_exception_return
+
+/* Decrementer Interrupt */
+ MASKABLE_EXCEPTION(0x900, decrementer, .timer_interrupt, ACK_DEC)
+
+/* Fixed Interval Timer Interrupt */
+ MASKABLE_EXCEPTION(0x980, fixed_interval, .unknown_exception, ACK_FIT)
+
+/* Watchdog Timer Interrupt */
+ START_EXCEPTION(watchdog);
+ CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE)
+// EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL)
+// bl special_reg_save_crit
+// addi r3,r1,STACK_FRAME_OVERHEAD
+// bl .unknown_exception
+// b ret_from_crit_except
+ b .
+
+/* System Call Interrupt */
+ START_EXCEPTION(system_call)
+ mr r9,r13 /* keep a copy of userland r13 */
+ mfspr r11,SPRN_SRR0 /* get return address */
+ mfspr r12,SPRN_SRR1 /* get previous MSR */
+ mfspr r13,SPRN_SPRG_PACA /* get our PACA */
+ b system_call_common
+
+/* Auxillary Processor Unavailable Interrupt */
+ START_EXCEPTION(ap_unavailable);
+ NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE)
+ EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .save_nvgprs
+ INTS_RESTORE_HARD
+ bl .unknown_exception
+ b .ret_from_except
+
+/* Debug exception as a critical interrupt*/
+ START_EXCEPTION(debug_crit);
+ CRIT_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS)
+
+ /*
+ * If there is a single step or branch-taken exception in an
+ * exception entry sequence, it was probably meant to apply to
+ * the code where the exception occurred (since exception entry
+ * doesn't turn off DE automatically). We simulate the effect
+ * of turning off DE on entry to an exception handler by turning
+ * off DE in the CSRR1 value and clearing the debug status.
+ */
+
+ mfspr r14,SPRN_DBSR /* check single-step/branch taken */
+ andis. r15,r14,DBSR_IC@h
+ beq+ 1f
+
+ LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
+ LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+ cmpld cr0,r10,r14
+ cmpld cr1,r10,r15
+ blt+ cr0,1f
+ bge+ cr1,1f
+
+ /* here it looks like we got an inappropriate debug exception. */
+ lis r14,DBSR_IC@h /* clear the IC event */
+ rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */
+ mtspr SPRN_DBSR,r14
+ mtspr SPRN_CSRR1,r11
+ lwz r10,PACA_EXCRIT+EX_CR(r13) /* restore registers */
+ ld r1,PACA_EXCRIT+EX_R1(r13)
+ ld r14,PACA_EXCRIT+EX_R14(r13)
+ ld r15,PACA_EXCRIT+EX_R15(r13)
+ mtcr r10
+ ld r10,PACA_EXCRIT+EX_R10(r13) /* restore registers */
+ ld r11,PACA_EXCRIT+EX_R11(r13)
+ mfspr r13,SPRN_SPRG_CRIT_SCRATCH
+ rfci
+
+ /* Normal debug exception */
+ /* XXX We only handle coming from userspace for now since we can't
+ * quite save properly an interrupted kernel state yet
+ */
+1: andi. r14,r11,MSR_PR; /* check for userspace again */
+ beq kernel_dbg_exc; /* if from kernel mode */
+
+ /* Now we mash up things to make it look like we are coming on a
+ * normal exception
+ */
+ mfspr r15,SPRN_SPRG_CRIT_SCRATCH
+ mtspr SPRN_SPRG_GEN_SCRATCH,r15
+ mfspr r14,SPRN_DBSR
+ EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE_ALL)
+ std r14,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ mr r4,r14
+ ld r14,PACA_EXCRIT+EX_R14(r13)
+ ld r15,PACA_EXCRIT+EX_R15(r13)
+ bl .save_nvgprs
+ bl .DebugException
+ b .ret_from_except
+
+kernel_dbg_exc:
+ b . /* NYI */
+
+
+/*
+ * An interrupt came in while soft-disabled; clear EE in SRR1,
+ * clear paca->hard_enabled and return.
+ */
+masked_interrupt_book3e:
+ mtcr r10
+ stb r11,PACAHARDIRQEN(r13)
+ mfspr r10,SPRN_SRR1
+ rldicl r11,r10,48,1 /* clear MSR_EE */
+ rotldi r10,r11,16
+ mtspr SPRN_SRR1,r10
+ ld r10,PACA_EXGEN+EX_R10(r13); /* restore registers */
+ ld r11,PACA_EXGEN+EX_R11(r13);
+ mfspr r13,SPRN_SPRG_GEN_SCRATCH;
+ rfi
+ b .
+
+/*
+ * This is called from 0x300 and 0x400 handlers after the prologs with
+ * r14 and r15 containing the fault address and error code, with the
+ * original values stashed away in the PACA
+ */
+storage_fault_common:
+ std r14,_DAR(r1)
+ std r15,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ mr r4,r14
+ mr r5,r15
+ ld r14,PACA_EXGEN+EX_R14(r13)
+ ld r15,PACA_EXGEN+EX_R15(r13)
+ INTS_RESTORE_HARD
+ bl .do_page_fault
+ cmpdi r3,0
+ bne- 1f
+ b .ret_from_except_lite
+1: bl .save_nvgprs
+ mr r5,r3
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ld r4,_DAR(r1)
+ bl .bad_page_fault
+ b .ret_from_except
+
+/*
+ * Alignment exception doesn't fit entirely in the 0x100 bytes so it
+ * continues here.
+ */
+alignment_more:
+ std r14,_DAR(r1)
+ std r15,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ld r14,PACA_EXGEN+EX_R14(r13)
+ ld r15,PACA_EXGEN+EX_R15(r13)
+ bl .save_nvgprs
+ INTS_RESTORE_HARD
+ bl .alignment_exception
+ b .ret_from_except
+
+/*
+ * We branch here from entry_64.S for the last stage of the exception
+ * return code path. MSR:EE is expected to be off at that point
+ */
+_GLOBAL(exception_return_book3e)
+ b 1f
+
+/* This is the return from load_up_fpu fast path which could do with
+ * less GPR restores in fact, but for now we have a single return path
+ */
+ .globl fast_exception_return
+fast_exception_return:
+ wrteei 0
+1: mr r0,r13
+ ld r10,_MSR(r1)
+ REST_4GPRS(2, r1)
+ andi. r6,r10,MSR_PR
+ REST_2GPRS(6, r1)
+ beq 1f
+ ACCOUNT_CPU_USER_EXIT(r10, r11)
+ ld r0,GPR13(r1)
+
+1: stdcx. r0,0,r1 /* to clear the reservation */
+
+ ld r8,_CCR(r1)
+ ld r9,_LINK(r1)
+ ld r10,_CTR(r1)
+ ld r11,_XER(r1)
+ mtcr r8
+ mtlr r9
+ mtctr r10
+ mtxer r11
+ REST_2GPRS(8, r1)
+ ld r10,GPR10(r1)
+ ld r11,GPR11(r1)
+ ld r12,GPR12(r1)
+ mtspr SPRN_SPRG_GEN_SCRATCH,r0
+
+ std r10,PACA_EXGEN+EX_R10(r13);
+ std r11,PACA_EXGEN+EX_R11(r13);
+ ld r10,_NIP(r1)
+ ld r11,_MSR(r1)
+ ld r0,GPR0(r1)
+ ld r1,GPR1(r1)
+ mtspr SPRN_SRR0,r10
+ mtspr SPRN_SRR1,r11
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ ld r11,PACA_EXGEN+EX_R11(r13)
+ mfspr r13,SPRN_SPRG_GEN_SCRATCH
+ rfi
+
+/*
+ * Trampolines used when spotting a bad kernel stack pointer in
+ * the exception entry code.
+ *
+ * TODO: move some bits like SRR0 read to trampoline, pass PACA
+ * index around, etc... to handle crit & mcheck
+ */
+BAD_STACK_TRAMPOLINE(0x000)
+BAD_STACK_TRAMPOLINE(0x100)
+BAD_STACK_TRAMPOLINE(0x200)
+BAD_STACK_TRAMPOLINE(0x300)
+BAD_STACK_TRAMPOLINE(0x400)
+BAD_STACK_TRAMPOLINE(0x500)
+BAD_STACK_TRAMPOLINE(0x600)
+BAD_STACK_TRAMPOLINE(0x700)
+BAD_STACK_TRAMPOLINE(0x800)
+BAD_STACK_TRAMPOLINE(0x900)
+BAD_STACK_TRAMPOLINE(0x980)
+BAD_STACK_TRAMPOLINE(0x9f0)
+BAD_STACK_TRAMPOLINE(0xa00)
+BAD_STACK_TRAMPOLINE(0xb00)
+BAD_STACK_TRAMPOLINE(0xc00)
+BAD_STACK_TRAMPOLINE(0xd00)
+BAD_STACK_TRAMPOLINE(0xe00)
+BAD_STACK_TRAMPOLINE(0xf00)
+BAD_STACK_TRAMPOLINE(0xf20)
+
+ .globl bad_stack_book3e
+bad_stack_book3e:
+ /* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */
+ mfspr r10,SPRN_SRR0; /* read SRR0 before touching stack */
+ ld r1,PACAEMERGSP(r13)
+ subi r1,r1,64+INT_FRAME_SIZE
+ std r10,_NIP(r1)
+ std r11,_MSR(r1)
+ ld r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */
+ lwz r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */
+ std r10,GPR1(r1)
+ std r11,_CCR(r1)
+ mfspr r10,SPRN_DEAR
+ mfspr r11,SPRN_ESR
+ std r10,_DAR(r1)
+ std r11,_DSISR(r1)
+ std r0,GPR0(r1); /* save r0 in stackframe */ \
+ std r2,GPR2(r1); /* save r2 in stackframe */ \
+ SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
+ SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
+ std r9,GPR9(r1); /* save r9 in stackframe */ \
+ ld r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */ \
+ ld r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */ \
+ mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \
+ std r3,GPR10(r1); /* save r10 to stackframe */ \
+ std r4,GPR11(r1); /* save r11 to stackframe */ \
+ std r12,GPR12(r1); /* save r12 in stackframe */ \
+ std r5,GPR13(r1); /* save it to stackframe */ \
+ mflr r10
+ mfctr r11
+ mfxer r12
+ std r10,_LINK(r1)
+ std r11,_CTR(r1)
+ std r12,_XER(r1)
+ SAVE_10GPRS(14,r1)
+ SAVE_8GPRS(24,r1)
+ lhz r12,PACA_TRAP_SAVE(r13)
+ std r12,_TRAP(r1)
+ addi r11,r1,INT_FRAME_SIZE
+ std r11,0(r1)
+ li r12,0
+ std r12,0(r11)
+ ld r2,PACATOC(r13)
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .kernel_bad_stack
+ b 1b
+
+/*
+ * Setup the initial TLB for a core. This current implementation
+ * assume that whatever we are running off will not conflict with
+ * the new mapping at PAGE_OFFSET.
+ * We also make various assumptions about the processor we run on,
+ * this might have to be made more flexible based on the content
+ * of MMUCFG and friends.
+ */
+_GLOBAL(initial_tlb_book3e)
+
+ /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the
+ * kernel linear mapping. We also set MAS8 once for all here though
+ * that will have to be made dependent on whether we are running under
+ * a hypervisor I suppose.
+ */
+ li r3,MAS0_HES | MAS0_WQ_ALLWAYS
+ mtspr SPRN_MAS0,r3
+ lis r3,(MAS1_VALID | MAS1_IPROT)@h
+ ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
+ mtspr SPRN_MAS1,r3
+ LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M)
+ mtspr SPRN_MAS2,r3
+ li r3,MAS3_SR | MAS3_SW | MAS3_SX
+ mtspr SPRN_MAS7_MAS3,r3
+ li r3,0
+ mtspr SPRN_MAS8,r3
+
+ /* Write the TLB entry */
+ tlbwe
+
+ /* Now we branch the new virtual address mapped by this entry */
+ LOAD_REG_IMMEDIATE(r3,1f)
+ mtctr r3
+ bctr
+
+1: /* We are now running at PAGE_OFFSET, clean the TLB of everything
+ * else (XXX we should scan for bolted crap from the firmware too)
+ */
+ PPC_TLBILX(0,0,0)
+ sync
+ isync
+
+ /* We translate LR and return */
+ mflr r3
+ tovirt(r3,r3)
+ mtlr r3
+ blr
+
+/*
+ * Main entry (boot CPU, thread 0)
+ *
+ * We enter here from head_64.S, possibly after the prom_init trampoline
+ * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits
+ * mode. Anything else is as it was left by the bootloader
+ *
+ * Initial requirements of this port:
+ *
+ * - Kernel loaded at 0 physical
+ * - A good lump of memory mapped 0:0 by UTLB entry 0
+ * - MSR:IS & MSR:DS set to 0
+ *
+ * Note that some of the above requirements will be relaxed in the future
+ * as the kernel becomes smarter at dealing with different initial conditions
+ * but for now you have to be careful
+ */
+_GLOBAL(start_initialization_book3e)
+ mflr r28
+
+ /* First, we need to setup some initial TLBs to map the kernel
+ * text, data and bss at PAGE_OFFSET. We don't have a real mode
+ * and always use AS 0, so we just set it up to match our link
+ * address and never use 0 based addresses.
+ */
+ bl .initial_tlb_book3e
+
+ /* Init global core bits */
+ bl .init_core_book3e
+
+ /* Init per-thread bits */
+ bl .init_thread_book3e
+
+ /* Return to common init code */
+ tovirt(r28,r28)
+ mtlr r28
+ blr
+
+
+/*
+ * Secondary core/processor entry
+ *
+ * This is entered for thread 0 of a secondary core, all other threads
+ * are expected to be stopped. It's similar to start_initialization_book3e
+ * except that it's generally entered from the holding loop in head_64.S
+ * after CPUs have been gathered by Open Firmware.
+ *
+ * We assume we are in 32 bits mode running with whatever TLB entry was
+ * set for us by the firmware or POR engine.
+ */
+_GLOBAL(book3e_secondary_core_init_tlb_set)
+ li r4,1
+ b .generic_secondary_smp_init
+
+_GLOBAL(book3e_secondary_core_init)
+ mflr r28
+
+ /* Do we need to setup initial TLB entry ? */
+ cmplwi r4,0
+ bne 2f
+
+ /* Setup TLB for this core */
+ bl .initial_tlb_book3e
+
+ /* We can return from the above running at a different
+ * address, so recalculate r2 (TOC)
+ */
+ bl .relative_toc
+
+ /* Init global core bits */
+2: bl .init_core_book3e
+
+ /* Init per-thread bits */
+3: bl .init_thread_book3e
+
+ /* Return to common init code at proper virtual address.
+ *
+ * Due to various previous assumptions, we know we entered this
+ * function at either the final PAGE_OFFSET mapping or using a
+ * 1:1 mapping at 0, so we don't bother doing a complicated check
+ * here, we just ensure the return address has the right top bits.
+ *
+ * Note that if we ever want to be smarter about where we can be
+ * started from, we have to be careful that by the time we reach
+ * the code below we may already be running at a different location
+ * than the one we were called from since initial_tlb_book3e can
+ * have moved us already.
+ */
+ cmpdi cr0,r28,0
+ blt 1f
+ lis r3,PAGE_OFFSET@highest
+ sldi r3,r3,32
+ or r28,r28,r3
+1: mtlr r28
+ blr
+
+_GLOBAL(book3e_secondary_thread_init)
+ mflr r28
+ b 3b
+
+_STATIC(init_core_book3e)
+ /* Establish the interrupt vector base */
+ LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
+ mtspr SPRN_IVPR,r3
+ sync
+ blr
+
+_STATIC(init_thread_book3e)
+ lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
+ mtspr SPRN_EPCR,r3
+
+ /* Make sure interrupts are off */
+ wrteei 0
+
+ /* disable watchdog and FIT and enable DEC interrupts */
+ lis r3,TCR_DIE@h
+ mtspr SPRN_TCR,r3
+
+ blr
+
+
+
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff