module_param(no_fw_recovery, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(no_fw_recovery, " disable automatic FW error recovery");
-static bool no_fw_load = true;
-module_param(no_fw_load, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(no_fw_load, " do not download FW, use one in on-card flash.");
-
/* if not set via modparam, will be set to default value of 1/8 of
* rx ring size during init flow
*/
wil_halt_cpu(wil);
+ /* clear all boot loader "ready" bits */
+ W(RGF_USER_BL + offsetof(struct RGF_BL, ready), 0);
/* Clear Fw Download notification */
C(RGF_USER_USAGE_6, BIT(0));
/* TODO: check order here!!! Erez code is different */
W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
- /* wait until device ready. typical time is 200..250 msec */
+ /* wait until device ready. typical time is 20..80 msec */
do {
msleep(RST_DELAY);
- x = R(RGF_USER_HW_MACHINE_STATE);
+ x = R(RGF_USER_BL + offsetof(struct RGF_BL, ready));
if (delay++ > RST_COUNT) {
- wil_err(wil, "Reset not completed, hw_state 0x%08x\n",
+ wil_err(wil, "Reset not completed, bl.ready 0x%08x\n",
x);
return -ETIME;
}
- } while (x != HW_MACHINE_BOOT_DONE);
+ } while (!(x & BIT_BL_READY));
if (!is_reset_v2)
W(RGF_PCIE_LOS_COUNTER_CTL, BIT(8));
return 0;
}
-#undef R
-#undef W
-#undef S
-#undef C
-
void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
{
le32_to_cpus(&r->base);
le32_to_cpus(&r->head);
}
+static int wil_get_bl_info(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct RGF_BL bl;
+
+ wil_memcpy_fromio_32(&bl, wil->csr + HOSTADDR(RGF_USER_BL), sizeof(bl));
+ le32_to_cpus(&bl.ready);
+ le32_to_cpus(&bl.version);
+ le32_to_cpus(&bl.rf_type);
+ le32_to_cpus(&bl.baseband_type);
+
+ if (!is_valid_ether_addr(bl.mac_address)) {
+ wil_err(wil, "BL: Invalid MAC %pM\n", bl.mac_address);
+ return -EINVAL;
+ }
+
+ ether_addr_copy(ndev->perm_addr, bl.mac_address);
+ if (!is_valid_ether_addr(ndev->dev_addr))
+ ether_addr_copy(ndev->dev_addr, bl.mac_address);
+ wil_info(wil,
+ "Boot Loader: ver = %d MAC = %pM RF = 0x%08x bband = 0x%08x\n",
+ bl.version, bl.mac_address, bl.rf_type, bl.baseband_type);
+
+ return 0;
+}
+
static int wil_wait_for_fw_ready(struct wil6210_priv *wil)
{
ulong to = msecs_to_jiffies(1000);
* After calling this routine, you're expected to reload
* the firmware.
*/
-int wil_reset(struct wil6210_priv *wil)
+int wil_reset(struct wil6210_priv *wil, bool load_fw)
{
int rc;
if (rc)
return rc;
- if (!no_fw_load) {
- wil_info(wil, "Use firmware <%s>\n", WIL_FW_NAME);
+ rc = wil_get_bl_info(wil);
+ if (rc)
+ return rc;
+
+ if (load_fw) {
+ wil_info(wil, "Use firmware <%s> + board <%s>\n", WIL_FW_NAME,
+ WIL_FW2_NAME);
+
wil_halt_cpu(wil);
/* Loading f/w from the file */
rc = wil_request_firmware(wil, WIL_FW_NAME);
if (rc)
return rc;
+ rc = wil_request_firmware(wil, WIL_FW2_NAME);
+ if (rc)
+ return rc;
+
+ /* Mark FW as loaded from host */
+ S(RGF_USER_USAGE_6, 1);
- /* clear any interrupts which on-card-firmware may have set */
+ /* clear any interrupts which on-card-firmware
+ * may have set
+ */
wil6210_clear_irq(wil);
- { /* CAF_ICR - clear and mask */
- u32 a = HOSTADDR(RGF_CAF_ICR) +
- offsetof(struct RGF_ICR, ICR);
- u32 m = HOSTADDR(RGF_CAF_ICR) +
- offsetof(struct RGF_ICR, IMV);
- u32 icr = ioread32(wil->csr + a);
-
- iowrite32(icr, wil->csr + a); /* W1C */
- iowrite32(~0, wil->csr + m);
- wmb(); /* wait for completion */
- }
+ /* CAF_ICR - clear and mask */
+ /* it is W1C, clear by writing back same value */
+ S(RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0);
+ W(RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0);
+
wil_release_cpu(wil);
- } else {
- wil_info(wil, "Use firmware from on-card flash\n");
}
/* init after reset */
reinit_completion(&wil->wmi_ready);
reinit_completion(&wil->wmi_call);
- wil_configure_interrupt_moderation(wil);
- wil_unmask_irq(wil);
+ if (load_fw) {
+ wil_configure_interrupt_moderation(wil);
+ wil_unmask_irq(wil);
- /* we just started MAC, wait for FW ready */
- rc = wil_wait_for_fw_ready(wil);
+ /* we just started MAC, wait for FW ready */
+ rc = wil_wait_for_fw_ready(wil);
+ }
return rc;
}
+#undef R
+#undef W
+#undef S
+#undef C
+
void wil_fw_error_recovery(struct wil6210_priv *wil)
{
wil_dbg_misc(wil, "starting fw error recovery\n");
WARN_ON(!mutex_is_locked(&wil->mutex));
- rc = wil_reset(wil);
+ rc = wil_reset(wil, true);
if (rc)
return rc;
if (!iter)
wil_err(wil, "timeout waiting for idle FW/HW\n");
- wil_rx_fini(wil);
+ wil_reset(wil, false);
return 0;
}
extern int agg_wsize;
#define WIL_NAME "wil6210"
-#define WIL_FW_NAME "wil6210.fw"
+#define WIL_FW_NAME "wil6210.fw" /* code */
+#define WIL_FW2_NAME "wil6210.board" /* board & radio parameters */
#define WIL_MAX_BUS_REQUEST_KBPS 800000 /* ~6.1Gbps */
u32 IMC; /* Mask Clear, write 1 to clear */
} __packed;
+struct RGF_BL {
+ u32 ready; /* 0x880A3C bit [0] */
+#define BIT_BL_READY BIT(0)
+ u32 version; /* 0x880A40 version of the BL struct */
+ u32 rf_type; /* 0x880A44 ID of the connected RF */
+ u32 baseband_type; /* 0x880A48 ID of the baseband */
+ u8 mac_address[ETH_ALEN]; /* 0x880A4C permanent MAC */
+ u8 pad[2];
+} __packed;
+
/* registers - FW addresses */
#define RGF_USER_USAGE_1 (0x880004)
#define RGF_USER_USAGE_6 (0x880018)
#define RGF_USER_MAC_CPU_0 (0x8801fc)
#define BIT_USER_MAC_CPU_MAN_RST BIT(1) /* mac_cpu_man_rst */
#define RGF_USER_USER_SCRATCH_PAD (0x8802bc)
+#define RGF_USER_BL (0x880A3C) /* Boot Loader */
#define RGF_USER_FW_REV_ID (0x880a8c) /* chip revision */
#define RGF_USER_CLKS_CTL_0 (0x880abc)
#define BIT_USER_CLKS_CAR_AHB_SW_SEL BIT(1) /* ref clk/PLL */
void wil_if_remove(struct wil6210_priv *wil);
int wil_priv_init(struct wil6210_priv *wil);
void wil_priv_deinit(struct wil6210_priv *wil);
-int wil_reset(struct wil6210_priv *wil);
+int wil_reset(struct wil6210_priv *wil, bool no_fw);
void wil_fw_error_recovery(struct wil6210_priv *wil);
void wil_set_recovery_state(struct wil6210_priv *wil, int state);
int wil_up(struct wil6210_priv *wil);
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff