mmc: tmio: use BIT() within defines

BIT() makes it easier to match the bits to the datasheet. This is
especially important here, since some variants have different names in
their datasheets (like with Renesas R-Car).

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index e75e5ca220bc0adece8d0422a0be7e59e71163fd..74945c1a66ce81ec5b8db8f533d247bd0cb2a925 100644 (file)
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -49,27 +49,29 @@
 #define CTL_RESET_SDIO 0x1e0
 
 /* Definitions for values the CTRL_STATUS register can take. */
-#define TMIO_STAT_CMDRESPEND    0x00000001
-#define TMIO_STAT_DATAEND       0x00000004
-#define TMIO_STAT_CARD_REMOVE   0x00000008
-#define TMIO_STAT_CARD_INSERT   0x00000010
-#define TMIO_STAT_SIGSTATE      0x00000020
-#define TMIO_STAT_WRPROTECT     0x00000080
-#define TMIO_STAT_CARD_REMOVE_A 0x00000100
-#define TMIO_STAT_CARD_INSERT_A 0x00000200
-#define TMIO_STAT_SIGSTATE_A    0x00000400
-#define TMIO_STAT_CMD_IDX_ERR   0x00010000
-#define TMIO_STAT_CRCFAIL       0x00020000
-#define TMIO_STAT_STOPBIT_ERR   0x00040000
-#define TMIO_STAT_DATATIMEOUT   0x00080000
-#define TMIO_STAT_RXOVERFLOW    0x00100000
-#define TMIO_STAT_TXUNDERRUN    0x00200000
-#define TMIO_STAT_CMDTIMEOUT    0x00400000
-#define TMIO_STAT_RXRDY         0x01000000
-#define TMIO_STAT_TXRQ          0x02000000
-#define TMIO_STAT_ILL_FUNC      0x20000000
-#define TMIO_STAT_CMD_BUSY      0x40000000
-#define TMIO_STAT_ILL_ACCESS    0x80000000
+#define TMIO_STAT_CMDRESPEND    BIT(0)
+#define TMIO_STAT_DATAEND       BIT(2)
+#define TMIO_STAT_CARD_REMOVE   BIT(3)
+#define TMIO_STAT_CARD_INSERT   BIT(4)
+#define TMIO_STAT_SIGSTATE      BIT(5)
+#define TMIO_STAT_WRPROTECT     BIT(7)
+#define TMIO_STAT_CARD_REMOVE_A BIT(8)
+#define TMIO_STAT_CARD_INSERT_A BIT(9)
+#define TMIO_STAT_SIGSTATE_A    BIT(10)
+
+/* These belong technically to CTRL_STATUS2, but the driver merges them */
+#define TMIO_STAT_CMD_IDX_ERR   BIT(16)
+#define TMIO_STAT_CRCFAIL       BIT(17)
+#define TMIO_STAT_STOPBIT_ERR   BIT(18)
+#define TMIO_STAT_DATATIMEOUT   BIT(19)
+#define TMIO_STAT_RXOVERFLOW    BIT(20)
+#define TMIO_STAT_TXUNDERRUN    BIT(21)
+#define TMIO_STAT_CMDTIMEOUT    BIT(22)
+#define TMIO_STAT_RXRDY         BIT(24)
+#define TMIO_STAT_TXRQ          BIT(25)
+#define TMIO_STAT_ILL_FUNC      BIT(29)
+#define TMIO_STAT_CMD_BUSY      BIT(30)
+#define TMIO_STAT_ILL_ACCESS    BIT(31)
 
 #define TMIO_STATUS2_DAT0      BIT(7)