This enables support for Philips PNX4008 mobile platform.
config ARCH_PXA
- bool "PXA2xx-based"
+ bool "PXA2xx/PXA3xx-based"
depends on MMU
select ARCH_MTD_XIP
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
- Support for Intel's PXA2XX processor line.
+ Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
config ARCH_RPC
bool "RiscPC"
config IWMMXT
bool "Enable iWMMXt support"
depends on CPU_XSCALE || CPU_XSC3
- default y if PXA27x
+ default y if PXA27x || PXA3xx
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
if ARCH_PXA
-menu "Intel PXA2xx Implementations"
+menu "Intel PXA2xx/PXA3xx Implementations"
+
+if PXA3xx
+
+menu "Supported PXA3xx Processor Variants"
+
+config CPU_PXA300
+ bool "PXA300 (codename Monahans-L)"
+
+config CPU_PXA310
+ bool "PXA310 (codename Monahans-LV)"
+ select CPU_PXA300
+
+config CPU_PXA320
+ bool "PXA320 (codename Monahans-P)"
+
+endmenu
+
+endif
choice
prompt "Select target board"
bool "CompuLab EM-x270 platform"
select PXA27x
+config MACH_ZYLONITE
+ bool "PXA3xx Development Platform"
+ select PXA3xx
+
endchoice
if PXA_SHARPSL
help
Select code specific to PXA27x variants
+config PXA3xx
+ bool
+ help
+ Select code specific to PXA3xx variants
+
config PXA_SHARP_C7xx
bool
select PXA_SSP
obj-y += clock.o generic.o irq.o dma.o time.o
obj-$(CONFIG_PXA25x) += pxa25x.o
obj-$(CONFIG_PXA27x) += pxa27x.o
+obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o
+obj-$(CONFIG_CPU_PXA300) += pxa300.o
+obj-$(CONFIG_CPU_PXA320) += pxa320.o
# Specific board support
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
+ifeq ($(CONFIG_MACH_ZYLONITE),y)
+ obj-y += zylonite.o
+ obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
+ obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
+endif
+
# Support for blinky lights
led-y := leds.o
led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
{
if (cpu_is_pxa21x() || cpu_is_pxa25x())
return pxa25x_get_clk_frequency_khz(info);
- else
+ else if (cpu_is_pxa27x())
return pxa27x_get_clk_frequency_khz(info);
+ else
+ return pxa3xx_get_clk_frequency_khz(info);
}
EXPORT_SYMBOL(get_clk_frequency_khz);
{
if (cpu_is_pxa21x() || cpu_is_pxa25x())
return pxa25x_get_memclk_frequency_10khz();
- else
+ else if (cpu_is_pxa27x())
return pxa27x_get_memclk_frequency_10khz();
+ else
+ return pxa3xx_get_memclk_frequency_10khz();
}
EXPORT_SYMBOL(get_memclk_frequency_10khz);
extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int));
extern void __init pxa25x_init_irq(void);
extern void __init pxa27x_init_irq(void);
+extern void __init pxa3xx_init_irq(void);
extern void __init pxa_map_io(void);
extern unsigned int get_clk_frequency_khz(int info);
#define pxa27x_get_memclk_frequency_10khz() (0)
#endif
+#ifdef CONFIG_PXA3xx
+extern unsigned pxa3xx_get_clk_frequency_khz(int);
+extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
+#else
+#define pxa3xx_get_clk_frequency_khz(x) (0)
+#define pxa3xx_get_memclk_frequency_10khz() (0)
+#endif
}
}
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
/*
* This is for the second set of internal IRQs as found on the PXA27x.
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/mfp.c
+ *
+ * PXA3xx Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp.h>
+
+/* mfp_spin_lock is used to ensure that MFP register configuration
+ * (most likely a read-modify-write operation) is atomic, and that
+ * mfp_table[] is consistent
+ */
+static DEFINE_SPINLOCK(mfp_spin_lock);
+
+static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
+static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
+
+#define mfpr_readl(off) \
+ __raw_readl(mfpr_mmio_base + (off))
+
+#define mfpr_writel(off, val) \
+ __raw_writel(val, mfpr_mmio_base + (off))
+
+/*
+ * perform a read-back of any MFPR register to make sure the
+ * previous writings are finished
+ */
+#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0)
+
+static inline void __mfp_config(int pin, unsigned long val)
+{
+ unsigned long off = mfp_table[pin].mfpr_off;
+
+ mfp_table[pin].mfpr_val = val;
+ mfpr_writel(off, val);
+}
+
+void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num)
+{
+ int i, pin;
+ unsigned long val, flags;
+ mfp_cfg_t *mfp_cfg = mfp_cfgs;
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ for (i = 0; i < num; i++, mfp_cfg++) {
+ pin = MFP_CFG_PIN(*mfp_cfg);
+ val = MFP_CFG_VAL(*mfp_cfg);
+
+ BUG_ON(pin >= MFP_PIN_MAX);
+
+ __mfp_config(pin, val);
+ }
+
+ mfpr_sync();
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+unsigned long pxa3xx_mfp_read(int mfp)
+{
+ unsigned long val, flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+ val = mfpr_readl(mfp_table[mfp].mfpr_off);
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+
+ return val;
+}
+
+void pxa3xx_mfp_write(int mfp, unsigned long val)
+{
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+ mfpr_writel(mfp_table[mfp].mfpr_off, val);
+ mfpr_sync();
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_afds(int mfp, int af, int ds)
+{
+ uint32_t mfpr_off, mfpr_val;
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+ mfpr_off = mfp_table[mfp].mfpr_off;
+
+ mfpr_val = mfpr_readl(mfpr_off);
+ mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK);
+ mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) |
+ ((ds & 0x7) << MFPR_DRV_OFFSET));
+
+ mfpr_writel(mfpr_off, mfpr_val);
+ mfpr_sync();
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_rdh(int mfp, int rdh)
+{
+ uint32_t mfpr_off, mfpr_val;
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ mfpr_off = mfp_table[mfp].mfpr_off;
+
+ mfpr_val = mfpr_readl(mfpr_off);
+ mfpr_val &= ~MFPR_RDH_MASK;
+
+ if (likely(rdh))
+ mfpr_val |= (1u << MFPR_SS_OFFSET);
+
+ mfpr_writel(mfpr_off, mfpr_val);
+ mfpr_sync();
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_lpm(int mfp, int lpm)
+{
+ uint32_t mfpr_off, mfpr_val;
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ mfpr_off = mfp_table[mfp].mfpr_off;
+ mfpr_val = mfpr_readl(mfpr_off);
+ mfpr_val &= ~MFPR_LPM_MASK;
+
+ if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET;
+ if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET;
+ if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET;
+ if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET;
+ if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET;
+
+ mfpr_writel(mfpr_off, mfpr_val);
+ mfpr_sync();
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_pull(int mfp, int pull)
+{
+ uint32_t mfpr_off, mfpr_val;
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ mfpr_off = mfp_table[mfp].mfpr_off;
+ mfpr_val = mfpr_readl(mfpr_off);
+ mfpr_val &= ~MFPR_PULL_MASK;
+ mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET);
+
+ mfpr_writel(mfpr_off, mfpr_val);
+ mfpr_sync();
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_edge(int mfp, int edge)
+{
+ uint32_t mfpr_off, mfpr_val;
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ mfpr_off = mfp_table[mfp].mfpr_off;
+ mfpr_val = mfpr_readl(mfpr_off);
+
+ mfpr_val &= ~MFPR_EDGE_MASK;
+ mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET;
+ mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET;
+
+ mfpr_writel(mfpr_off, mfpr_val);
+ mfpr_sync();
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
+{
+ struct pxa3xx_mfp_addr_map *p;
+ unsigned long offset, flags;
+ int i;
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ for (p = map; p->start != MFP_PIN_INVALID; p++) {
+ offset = p->offset;
+ i = p->start;
+
+ do {
+ mfp_table[i].mfpr_off = offset;
+ mfp_table[i].mfpr_val = 0;
+ offset += 4; i++;
+ } while ((i <= p->end) && (p->end != -1));
+ }
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init pxa3xx_init_mfp(void)
+{
+ memset(mfp_table, 0, sizeof(mfp_table));
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/pxa300.c
+ *
+ * Code specific to PXA300/PXA310
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp-pxa300.h>
+
+static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
+
+ MFP_ADDR_X(GPIO0, GPIO2, 0x00b4),
+ MFP_ADDR_X(GPIO3, GPIO26, 0x027c),
+ MFP_ADDR_X(GPIO27, GPIO127, 0x0400),
+ MFP_ADDR_X(GPIO0_2, GPIO6_2, 0x02ec),
+
+ MFP_ADDR(nBE0, 0x0204),
+ MFP_ADDR(nBE1, 0x0208),
+
+ MFP_ADDR(nLUA, 0x0244),
+ MFP_ADDR(nLLA, 0x0254),
+
+ MFP_ADDR(DF_CLE_nOE, 0x0240),
+ MFP_ADDR(DF_nRE_nOE, 0x0200),
+ MFP_ADDR(DF_ALE_nWE, 0x020C),
+ MFP_ADDR(DF_INT_RnB, 0x00C8),
+ MFP_ADDR(DF_nCS0, 0x0248),
+ MFP_ADDR(DF_nCS1, 0x0278),
+ MFP_ADDR(DF_nWE, 0x00CC),
+
+ MFP_ADDR(DF_ADDR0, 0x0210),
+ MFP_ADDR(DF_ADDR1, 0x0214),
+ MFP_ADDR(DF_ADDR2, 0x0218),
+ MFP_ADDR(DF_ADDR3, 0x021C),
+
+ MFP_ADDR(DF_IO0, 0x0220),
+ MFP_ADDR(DF_IO1, 0x0228),
+ MFP_ADDR(DF_IO2, 0x0230),
+ MFP_ADDR(DF_IO3, 0x0238),
+ MFP_ADDR(DF_IO4, 0x0258),
+ MFP_ADDR(DF_IO5, 0x0260),
+ MFP_ADDR(DF_IO6, 0x0268),
+ MFP_ADDR(DF_IO7, 0x0270),
+ MFP_ADDR(DF_IO8, 0x0224),
+ MFP_ADDR(DF_IO9, 0x022C),
+ MFP_ADDR(DF_IO10, 0x0234),
+ MFP_ADDR(DF_IO11, 0x023C),
+ MFP_ADDR(DF_IO12, 0x025C),
+ MFP_ADDR(DF_IO13, 0x0264),
+ MFP_ADDR(DF_IO14, 0x026C),
+ MFP_ADDR(DF_IO15, 0x0274),
+
+ MFP_ADDR_END,
+};
+
+/* override pxa300 MFP register addresses */
+static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
+ MFP_ADDR_X(GPIO30, GPIO98, 0x0418),
+ MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
+
+ MFP_ADDR(ULPI_STP, 0x040C),
+ MFP_ADDR(ULPI_NXT, 0x0410),
+ MFP_ADDR(ULPI_DIR, 0x0414),
+
+ MFP_ADDR_END,
+};
+
+static int __init pxa300_init(void)
+{
+ if (cpu_is_pxa300() || cpu_is_pxa310()) {
+ pxa3xx_init_mfp();
+ pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+ }
+
+ if (cpu_is_pxa310())
+ pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+
+ return 0;
+}
+
+core_initcall(pxa300_init);
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/pxa320.c
+ *
+ * Code specific to PXA320
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp.h>
+#include <asm/arch/mfp-pxa320.h>
+
+static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
+
+ MFP_ADDR_X(GPIO0, GPIO4, 0x0124),
+ MFP_ADDR_X(GPIO5, GPIO26, 0x028C),
+ MFP_ADDR_X(GPIO27, GPIO62, 0x0400),
+ MFP_ADDR_X(GPIO63, GPIO73, 0x04B4),
+ MFP_ADDR_X(GPIO74, GPIO98, 0x04F0),
+ MFP_ADDR_X(GPIO99, GPIO127, 0x0600),
+ MFP_ADDR_X(GPIO0_2, GPIO5_2, 0x0674),
+ MFP_ADDR_X(GPIO6_2, GPIO13_2, 0x0494),
+ MFP_ADDR_X(GPIO14_2, GPIO17_2, 0x04E0),
+
+ MFP_ADDR(nXCVREN, 0x0138),
+ MFP_ADDR(DF_CLE_nOE, 0x0204),
+ MFP_ADDR(DF_nADV1_ALE, 0x0208),
+ MFP_ADDR(DF_SCLK_S, 0x020C),
+ MFP_ADDR(DF_SCLK_E, 0x0210),
+ MFP_ADDR(nBE0, 0x0214),
+ MFP_ADDR(nBE1, 0x0218),
+ MFP_ADDR(DF_nADV2_ALE, 0x021C),
+ MFP_ADDR(DF_INT_RnB, 0x0220),
+ MFP_ADDR(DF_nCS0, 0x0224),
+ MFP_ADDR(DF_nCS1, 0x0228),
+ MFP_ADDR(DF_nWE, 0x022C),
+ MFP_ADDR(DF_nRE_nOE, 0x0230),
+ MFP_ADDR(nLUA, 0x0234),
+ MFP_ADDR(nLLA, 0x0238),
+ MFP_ADDR(DF_ADDR0, 0x023C),
+ MFP_ADDR(DF_ADDR1, 0x0240),
+ MFP_ADDR(DF_ADDR2, 0x0244),
+ MFP_ADDR(DF_ADDR3, 0x0248),
+ MFP_ADDR(DF_IO0, 0x024C),
+ MFP_ADDR(DF_IO8, 0x0250),
+ MFP_ADDR(DF_IO1, 0x0254),
+ MFP_ADDR(DF_IO9, 0x0258),
+ MFP_ADDR(DF_IO2, 0x025C),
+ MFP_ADDR(DF_IO10, 0x0260),
+ MFP_ADDR(DF_IO3, 0x0264),
+ MFP_ADDR(DF_IO11, 0x0268),
+ MFP_ADDR(DF_IO4, 0x026C),
+ MFP_ADDR(DF_IO12, 0x0270),
+ MFP_ADDR(DF_IO5, 0x0274),
+ MFP_ADDR(DF_IO13, 0x0278),
+ MFP_ADDR(DF_IO6, 0x027C),
+ MFP_ADDR(DF_IO14, 0x0280),
+ MFP_ADDR(DF_IO7, 0x0284),
+ MFP_ADDR(DF_IO15, 0x0288),
+
+ MFP_ADDR_END,
+};
+
+static void __init pxa320_init_mfp(void)
+{
+ pxa3xx_init_mfp();
+ pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+}
+
+static int __init pxa320_init(void)
+{
+ if (cpu_is_pxa320())
+ pxa320_init_mfp();
+
+ return 0;
+}
+
+core_initcall(pxa320_init);
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/pxa3xx.c
+ *
+ * code specific to pxa3xx aka Monahans
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ *
+ * 2007-09-02: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/ssp.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+/* Crystal clock: 13MHz */
+#define BASE_CLK 13000000
+
+/* Ring Oscillator Clock: 60MHz */
+#define RO_CLK 60000000
+
+#define ACCR_D0CS (1 << 26)
+
+/* crystal frequency to static memory controller multiplier (SMCFS) */
+static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
+
+/* crystal frequency to HSIO bus frequency multiplier (HSS) */
+static unsigned char hss_mult[4] = { 8, 12, 16, 0 };
+
+/*
+ * Get the clock frequency as reflected by CCSR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int pxa3xx_get_clk_frequency_khz(int info)
+{
+ unsigned long acsr, xclkcfg;
+ unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
+
+ /* Read XCLKCFG register turbo bit */
+ __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
+ t = xclkcfg & 0x1;
+
+ acsr = ACSR;
+
+ xl = acsr & 0x1f;
+ xn = (acsr >> 8) & 0x7;
+ hss = (acsr >> 14) & 0x3;
+
+ XL = xl * BASE_CLK;
+ XN = xn * XL;
+
+ ro = acsr & ACCR_D0CS;
+
+ CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
+ HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+ if (info) {
+ pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
+ RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
+ (ro) ? "" : "in");
+ pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
+ XL / 1000000, (XL % 1000000) / 10000, xl);
+ pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
+ XN / 1000000, (XN % 1000000) / 10000, xn,
+ (t) ? "" : "in");
+ pr_info("HSIO bus clock: %d.%02dMHz\n",
+ HSS / 1000000, (HSS % 1000000) / 10000);
+ }
+
+ return CLK;
+}
+
+/*
+ * Return the current static memory controller clock frequency
+ * in units of 10kHz
+ */
+unsigned int pxa3xx_get_memclk_frequency_10khz(void)
+{
+ unsigned long acsr;
+ unsigned int smcfs, clk = 0;
+
+ acsr = ACSR;
+
+ smcfs = (acsr >> 23) & 0x7;
+ clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK;
+
+ return (clk / 10000);
+}
+
+/*
+ * Return the current HSIO bus clock frequency
+ */
+static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
+{
+ unsigned long acsr;
+ unsigned int hss, hsio_clk;
+
+ acsr = ACSR;
+
+ hss = (acsr >> 14) & 0x3;
+ hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+ return hsio_clk;
+}
+
+static void clk_pxa3xx_cken_enable(struct clk *clk)
+{
+ unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+ local_irq_disable();
+
+ if (clk->cken < 32)
+ CKENA |= mask;
+ else
+ CKENB |= mask;
+
+ local_irq_enable();
+}
+
+static void clk_pxa3xx_cken_disable(struct clk *clk)
+{
+ unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+ local_irq_disable();
+
+ if (clk->cken < 32)
+ CKENA &= ~mask;
+ else
+ CKENB &= ~mask;
+
+ local_irq_enable();
+}
+
+static const struct clkops clk_pxa3xx_hsio_ops = {
+ .enable = clk_pxa3xx_cken_enable,
+ .disable = clk_pxa3xx_cken_disable,
+ .getrate = clk_pxa3xx_hsio_getrate,
+};
+
+static struct clk pxa3xx_clks[] = {
+ INIT_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
+ INIT_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
+
+ INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
+ INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
+ INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
+
+ INIT_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev),
+ INIT_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev),
+};
+
+void __init pxa3xx_init_irq(void)
+{
+ /* enable CP6 access */
+ u32 value;
+ __asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value));
+ value |= (1 << 6);
+ __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
+
+ pxa_init_irq_low();
+ pxa_init_irq_high();
+ pxa_init_irq_gpio(128);
+}
+
+/*
+ * device registration specific to PXA3xx.
+ */
+
+static struct platform_device *devices[] __initdata = {
+ &pxa_device_mci,
+ &pxa_device_udc,
+ &pxa_device_fb,
+ &pxa_device_ffuart,
+ &pxa_device_btuart,
+ &pxa_device_stuart,
+ &pxa_device_i2c,
+ &pxa_device_i2s,
+ &pxa_device_ficp,
+ &pxa_device_rtc,
+};
+
+static int __init pxa3xx_init(void)
+{
+ int ret = 0;
+
+ if (cpu_is_pxa3xx()) {
+ clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks));
+
+ if ((ret = pxa_init_dma(32)))
+ return ret;
+
+ return platform_add_devices(devices, ARRAY_SIZE(devices));
+ }
+ return 0;
+}
+
+subsys_initcall(pxa3xx_init);
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/zylonite.c
+ *
+ * Support for the PXA3xx Development Platform (aka Zylonite)
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ * rewrite to align with latest kernel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/zylonite.h>
+
+#include "generic.h"
+
+int gpio_backlight;
+int gpio_eth_irq;
+
+int lcd_id;
+int lcd_orientation;
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = ZYLONITE_ETH_PHYS + 0x300,
+ .end = ZYLONITE_ETH_PHYS + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = -1, /* for run-time assignment */
+ .end = -1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES)
+static void zylonite_backlight_power(int on)
+{
+ gpio_set_value(gpio_backlight, on);
+}
+
+static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
+ .pixclock = 110000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 6,
+ .right_margin = 4,
+ .vsync_len = 2,
+ .upper_margin = 2,
+ .lower_margin = 3,
+ .sync = FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
+ .pixclock = 50000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 1,
+ .left_margin = 0x9f,
+ .right_margin = 1,
+ .vsync_len = 44,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
+ .num_modes = 1,
+ .lccr0 = LCCR0_Act,
+ .lccr3 = LCCR3_PCP,
+ .pxafb_backlight_power = zylonite_backlight_power,
+};
+
+static struct pxafb_mode_info sharp_ls037_modes[] = {
+ [0] = {
+ .pixclock = 158000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 39,
+ .right_margin = 39,
+ .vsync_len = 1,
+ .upper_margin = 2,
+ .lower_margin = 3,
+ .sync = 0,
+ },
+ [1] = {
+ .pixclock = 39700,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 81,
+ .right_margin = 81,
+ .vsync_len = 1,
+ .upper_margin = 2,
+ .lower_margin = 7,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info zylonite_sharp_lcd_info = {
+ .modes = sharp_ls037_modes,
+ .num_modes = 2,
+ .lccr0 = LCCR0_Act,
+ .lccr3 = LCCR3_PCP | LCCR3_HSP | LCCR3_VSP,
+ .pxafb_backlight_power = zylonite_backlight_power,
+};
+
+static void __init zylonite_init_lcd(void)
+{
+ /* backlight GPIO: output, default on */
+ gpio_direction_output(gpio_backlight, 1);
+
+ if (lcd_id & 0x20) {
+ set_pxa_fb_info(&zylonite_sharp_lcd_info);
+ return;
+ }
+
+ /* legacy LCD panels, it would be handy here if LCD panel type can
+ * be decided at run-time
+ */
+ if (1)
+ zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
+ else
+ zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
+
+ set_pxa_fb_info(&zylonite_toshiba_lcd_info);
+}
+#else
+static inline void zylonite_init_lcd(void) {}
+#endif
+
+static void __init zylonite_init(void)
+{
+ /* board-processor specific initialization */
+ zylonite_pxa300_init();
+ zylonite_pxa320_init();
+
+ /*
+ * Note: We depend that the bootloader set
+ * the correct value to MSC register for SMC91x.
+ */
+ smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq);
+ smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq);
+ platform_device_register(&smc91x_device);
+
+ zylonite_init_lcd();
+}
+
+MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = zylonite_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/zylonite_pxa300.c
+ *
+ * PXA300/PXA310 specific support code for the
+ * PXA3xx Development Platform (aka Zylonite)
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/gpio.h>
+#include <asm/arch/mfp-pxa300.h>
+#include <asm/arch/zylonite.h>
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+/* PXA300/PXA310 common configurations */
+static mfp_cfg_t common_mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO70_LCD_LDD_16,
+ GPIO71_LCD_LDD_17,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+ GPIO76_LCD_VSYNC,
+ GPIO127_LCD_CS_N,
+
+ /* BTUART */
+ GPIO111_UART2_RTS,
+ GPIO112_UART2_RXD,
+ GPIO113_UART2_TXD,
+ GPIO114_UART2_CTS,
+
+ /* STUART */
+ GPIO109_UART3_TXD,
+ GPIO110_UART3_RXD,
+
+ /* AC97 */
+ GPIO23_AC97_nACRESET,
+ GPIO24_AC97_SYSCLK,
+ GPIO29_AC97_BITCLK,
+ GPIO25_AC97_SDATA_IN_0,
+ GPIO27_AC97_SDATA_OUT,
+ GPIO28_AC97_SYNC,
+
+ /* Keypad */
+ GPIO107_KP_DKIN_0,
+ GPIO108_KP_DKIN_1,
+ GPIO115_KP_MKIN_0,
+ GPIO116_KP_MKIN_1,
+ GPIO117_KP_MKIN_2,
+ GPIO118_KP_MKIN_3,
+ GPIO119_KP_MKIN_4,
+ GPIO120_KP_MKIN_5,
+ GPIO2_2_KP_MKIN_6,
+ GPIO3_2_KP_MKIN_7,
+ GPIO121_KP_MKOUT_0,
+ GPIO122_KP_MKOUT_1,
+ GPIO123_KP_MKOUT_2,
+ GPIO124_KP_MKOUT_3,
+ GPIO125_KP_MKOUT_4,
+ GPIO4_2_KP_MKOUT_5,
+ GPIO5_2_KP_MKOUT_6,
+ GPIO6_2_KP_MKOUT_7,
+};
+
+static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
+ /* FFUART */
+ GPIO30_UART1_RXD,
+ GPIO31_UART1_TXD,
+ GPIO32_UART1_CTS,
+ GPIO37_UART1_RTS,
+ GPIO33_UART1_DCD,
+ GPIO34_UART1_DSR,
+ GPIO35_UART1_RI,
+ GPIO36_UART1_DTR,
+
+ /* Ethernet */
+ GPIO2_nCS3,
+ GPIO99_GPIO,
+};
+
+static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
+ /* FFUART */
+ GPIO99_UART1_RXD,
+ GPIO100_UART1_TXD,
+ GPIO101_UART1_CTS,
+ GPIO106_UART1_RTS,
+
+ /* Ethernet */
+ GPIO2_nCS3,
+ GPIO102_GPIO,
+};
+
+#define NUM_LCD_DETECT_PINS 7
+
+static int lcd_detect_pins[] __initdata = {
+ MFP_PIN_GPIO71, /* LCD_LDD_17 - ORIENT */
+ MFP_PIN_GPIO70, /* LCD_LDD_16 - LCDID[5] */
+ MFP_PIN_GPIO75, /* LCD_BIAS - LCDID[4] */
+ MFP_PIN_GPIO73, /* LCD_LCLK - LCDID[3] */
+ MFP_PIN_GPIO72, /* LCD_FCLK - LCDID[2] */
+ MFP_PIN_GPIO127,/* LCD_CS_N - LCDID[1] */
+ MFP_PIN_GPIO76, /* LCD_VSYNC - LCDID[0] */
+};
+
+static void __init zylonite_detect_lcd_panel(void)
+{
+ unsigned long mfpr_save[NUM_LCD_DETECT_PINS];
+ int i, gpio, id = 0;
+
+ /* save the original MFP settings of these pins and configure
+ * them as GPIO Input, DS01X, Pull Neither, Edge Clear
+ */
+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
+ mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
+ pxa3xx_mfp_write(lcd_detect_pins[i], 0x8440);
+ }
+
+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
+ id = id << 1;
+ gpio = mfp_to_gpio(lcd_detect_pins[i]);
+ gpio_direction_input(gpio);
+
+ if (gpio_get_value(gpio))
+ id = id | 0x1;
+ }
+
+ /* lcd id, flush out bit 1 */
+ lcd_id = id & 0x3d;
+
+ /* lcd orientation, portrait or landscape */
+ lcd_orientation = (id >> 6) & 0x1;
+
+ /* restore the original MFP settings */
+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++)
+ pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
+}
+
+void __init zylonite_pxa300_init(void)
+{
+ if (cpu_is_pxa300() || cpu_is_pxa310()) {
+ /* initialize MFP */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(common_mfp_cfg));
+
+ /* detect LCD panel */
+ zylonite_detect_lcd_panel();
+
+ /* GPIO pin assignment */
+ gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
+ }
+
+ if (cpu_is_pxa300()) {
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_mfp_cfg));
+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO99);
+ }
+
+ if (cpu_is_pxa310()) {
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
+ }
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/zylonite_pxa320.c
+ *
+ * PXA320 specific support code for the
+ * PXA3xx Development Platform (aka Zylonite)
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mfp-pxa320.h>
+#include <asm/arch/zylonite.h>
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+static mfp_cfg_t mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO6_2_LCD_LDD_0,
+ GPIO7_2_LCD_LDD_1,
+ GPIO8_2_LCD_LDD_2,
+ GPIO9_2_LCD_LDD_3,
+ GPIO10_2_LCD_LDD_4,
+ GPIO11_2_LCD_LDD_5,
+ GPIO12_2_LCD_LDD_6,
+ GPIO13_2_LCD_LDD_7,
+ GPIO63_LCD_LDD_8,
+ GPIO64_LCD_LDD_9,
+ GPIO65_LCD_LDD_10,
+ GPIO66_LCD_LDD_11,
+ GPIO67_LCD_LDD_12,
+ GPIO68_LCD_LDD_13,
+ GPIO69_LCD_LDD_14,
+ GPIO70_LCD_LDD_15,
+ GPIO71_LCD_LDD_16,
+ GPIO72_LCD_LDD_17,
+ GPIO73_LCD_CS_N,
+ GPIO74_LCD_VSYNC,
+ GPIO14_2_LCD_FCLK,
+ GPIO15_2_LCD_LCLK,
+ GPIO16_2_LCD_PCLK,
+ GPIO17_2_LCD_BIAS,
+
+ /* FFUART */
+ GPIO41_UART1_RXD,
+ GPIO42_UART1_TXD,
+ GPIO43_UART1_CTS,
+ GPIO44_UART1_DCD,
+ GPIO45_UART1_DSR,
+ GPIO46_UART1_RI,
+ GPIO47_UART1_DTR,
+ GPIO48_UART1_RTS,
+
+ /* AC97 */
+ GPIO34_AC97_SYSCLK,
+ GPIO35_AC97_SDATA_IN_0,
+ GPIO37_AC97_SDATA_OUT,
+ GPIO38_AC97_SYNC,
+ GPIO39_AC97_BITCLK,
+ GPIO40_AC97_nACRESET,
+
+ /* I2C */
+ GPIO32_I2C_SCL,
+ GPIO33_I2C_SDA,
+
+ /* Keypad */
+ GPIO105_KP_DKIN_0,
+ GPIO106_KP_DKIN_1,
+ GPIO113_KP_MKIN_0,
+ GPIO114_KP_MKIN_1,
+ GPIO115_KP_MKIN_2,
+ GPIO116_KP_MKIN_3,
+ GPIO117_KP_MKIN_4,
+ GPIO118_KP_MKIN_5,
+ GPIO119_KP_MKIN_6,
+ GPIO120_KP_MKIN_7,
+ GPIO121_KP_MKOUT_0,
+ GPIO122_KP_MKOUT_1,
+ GPIO123_KP_MKOUT_2,
+ GPIO124_KP_MKOUT_3,
+ GPIO125_KP_MKOUT_4,
+ GPIO126_KP_MKOUT_5,
+ GPIO127_KP_MKOUT_6,
+ GPIO5_2_KP_MKOUT_7,
+
+ /* Ethernet */
+ GPIO4_nCS3,
+ GPIO90_GPIO,
+};
+
+#define NUM_LCD_DETECT_PINS 7
+
+static int lcd_detect_pins[] __initdata = {
+ MFP_PIN_GPIO72, /* LCD_LDD_17 - ORIENT */
+ MFP_PIN_GPIO71, /* LCD_LDD_16 - LCDID[5] */
+ MFP_PIN_GPIO17_2, /* LCD_BIAS - LCDID[4] */
+ MFP_PIN_GPIO15_2, /* LCD_LCLK - LCDID[3] */
+ MFP_PIN_GPIO14_2, /* LCD_FCLK - LCDID[2] */
+ MFP_PIN_GPIO73, /* LCD_CS_N - LCDID[1] */
+ MFP_PIN_GPIO74, /* LCD_VSYNC - LCDID[0] */
+ /*
+ * set the MFP_PIN_GPIO 14/15/17 to alternate function other than
+ * GPIO to avoid input level confliction with 14_2, 15_2, 17_2
+ */
+ MFP_PIN_GPIO14,
+ MFP_PIN_GPIO15,
+ MFP_PIN_GPIO17,
+};
+
+static int lcd_detect_mfpr[] __initdata = {
+ /* AF0, DS 1X, Pull Neither, Edge Clear */
+ 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440,
+ 0xc442, /* Backlight, Pull-Up, AF2 */
+ 0x8445, /* AF5 */
+ 0x8445, /* AF5 */
+};
+
+static void __init zylonite_detect_lcd_panel(void)
+{
+ unsigned long mfpr_save[ARRAY_SIZE(lcd_detect_pins)];
+ int i, gpio, id = 0;
+
+ /* save the original MFP settings of these pins and configure them
+ * as GPIO Input, DS01X, Pull Neither, Edge Clear
+ */
+ for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) {
+ mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
+ pxa3xx_mfp_write(lcd_detect_pins[i], lcd_detect_mfpr[i]);
+ }
+
+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
+ id = id << 1;
+ gpio = mfp_to_gpio(lcd_detect_pins[i]);
+ gpio_direction_input(gpio);
+
+ if (gpio_get_value(gpio))
+ id = id | 0x1;
+ }
+
+ /* lcd id, flush out bit 1 */
+ lcd_id = id & 0x3d;
+
+ /* lcd orientation, portrait or landscape */
+ lcd_orientation = (id >> 6) & 0x1;
+
+ /* restore the original MFP settings */
+ for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++)
+ pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
+}
+
+void __init zylonite_pxa320_init(void)
+{
+ if (cpu_is_pxa320()) {
+ /* initialize MFP */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
+
+ /* detect LCD panel */
+ zylonite_detect_lcd_panel();
+
+ /* GPIO pin assignment */
+ gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO14);
+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO9);
+ }
+}
# XScale Core Version 3
config CPU_XSC3
bool
- depends on ARCH_IXP23XX || ARCH_IOP13XX
+ depends on ARCH_IXP23XX || ARCH_IOP13XX || PXA3xx
default y
select CPU_32v5
select CPU_ABRT_EV5T
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-pxa/mfp-pxa300.h
+ *
+ * PXA300/PXA310 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA300_H
+#define __ASM_ARCH_MFP_PXA300_H
+
+#include <asm/arch/mfp.h>
+
+/* GPIO */
+#define GPIO46_GPIO MFP_CFG(GPIO46, AF1)
+#define GPIO49_GPIO MFP_CFG(GPIO49, AF3)
+#define GPIO50_GPIO MFP_CFG(GPIO50, AF2)
+#define GPIO51_GPIO MFP_CFG(GPIO51, AF3)
+#define GPIO52_GPIO MFP_CFG(GPIO52, AF3)
+#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
+
+#ifdef CONFIG_CPU_PXA310
+#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0)
+#endif
+
+/* Chip Select */
+#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1)
+
+/* AC97 */
+#define GPIO23_AC97_nACRESET MFP_CFG(GPIO23, AF1)
+#define GPIO24_AC97_SYSCLK MFP_CFG(GPIO24, AF1)
+#define GPIO29_AC97_BITCLK MFP_CFG(GPIO29, AF1)
+#define GPIO25_AC97_SDATA_IN_0 MFP_CFG(GPIO25, AF1)
+#define GPIO26_AC97_SDATA_IN_1 MFP_CFG(GPIO26, AF1)
+#define GPIO17_AC97_SDATA_IN_2 MFP_CFG(GPIO17, AF3)
+#define GPIO21_AC97_SDATA_IN_2 MFP_CFG(GPIO21, AF2)
+#define GPIO18_AC97_SDATA_IN_3 MFP_CFG(GPIO18, AF3)
+#define GPIO22_AC97_SDATA_IN_3 MFP_CFG(GPIO22, AF2)
+#define GPIO27_AC97_SDATA_OUT MFP_CFG(GPIO27, AF1)
+#define GPIO28_AC97_SYNC MFP_CFG(GPIO28, AF1)
+
+/* I2C */
+#define GPIO21_I2C_SCL MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
+#define GPIO22_I2C_SDA MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO39_CI_DD_0 MFP_CFG_DRV(GPIO39, AF1, DS04X)
+#define GPIO40_CI_DD_1 MFP_CFG_DRV(GPIO40, AF1, DS04X)
+#define GPIO41_CI_DD_2 MFP_CFG_DRV(GPIO41, AF1, DS04X)
+#define GPIO42_CI_DD_3 MFP_CFG_DRV(GPIO42, AF1, DS04X)
+#define GPIO43_CI_DD_4 MFP_CFG_DRV(GPIO43, AF1, DS04X)
+#define GPIO44_CI_DD_5 MFP_CFG_DRV(GPIO44, AF1, DS04X)
+#define GPIO45_CI_DD_6 MFP_CFG_DRV(GPIO45, AF1, DS04X)
+#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X)
+#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X)
+#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X)
+#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X)
+#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X)
+#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X)
+
+/* KEYPAD */
+#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT)
+#define GPIO4_KP_DKIN_7 MFP_CFG_LPM(GPIO4, AF2, FLOAT)
+#define GPIO16_KP_DKIN_6 MFP_CFG_LPM(GPIO16, AF6, FLOAT)
+#define GPIO83_KP_DKIN_2 MFP_CFG_LPM(GPIO83, AF5, FLOAT)
+#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF5, FLOAT)
+#define GPIO85_KP_DKIN_0 MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_1 MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+#define GPIO87_KP_DKIN_2 MFP_CFG_LPM(GPIO87, AF3, FLOAT)
+#define GPIO88_KP_DKIN_3 MFP_CFG_LPM(GPIO88, AF3, FLOAT)
+#define GPIO89_KP_DKIN_3 MFP_CFG_LPM(GPIO89, AF3, FLOAT)
+#define GPIO107_KP_DKIN_0 MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_1 MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_2 MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_3 MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_4 MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_5 MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+#define GPIO113_KP_DKIN_6 MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_7 MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_0 MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_1 MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_2 MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_3 MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_4 MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_5 MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF5, FLOAT)
+#define GPIO0_2_KP_DKIN_0 MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+#define GPIO1_2_KP_DKIN_1 MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
+#define GPIO2_2_KP_DKIN_6 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_7 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_1 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+#define GPIO5_2_KP_DKIN_0 MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
+
+#define GPIO5_KP_MKIN_0 MFP_CFG_LPM(GPIO5, AF2, FLOAT)
+#define GPIO6_KP_MKIN_1 MFP_CFG_LPM(GPIO6, AF2, FLOAT)
+#define GPIO9_KP_MKIN_6 MFP_CFG_LPM(GPIO9, AF3, FLOAT)
+#define GPIO10_KP_MKIN_7 MFP_CFG_LPM(GPIO10, AF3, FLOAT)
+#define GPIO70_KP_MKIN_6 MFP_CFG_LPM(GPIO70, AF3, FLOAT)
+#define GPIO71_KP_MKIN_7 MFP_CFG_LPM(GPIO71, AF3, FLOAT)
+#define GPIO100_KP_MKIN_6 MFP_CFG_LPM(GPIO100, AF7, FLOAT)
+#define GPIO101_KP_MKIN_7 MFP_CFG_LPM(GPIO101, AF7, FLOAT)
+#define GPIO112_KP_MKIN_6 MFP_CFG_LPM(GPIO112, AF4, FLOAT)
+#define GPIO113_KP_MKIN_7 MFP_CFG_LPM(GPIO113, AF4, FLOAT)
+#define GPIO115_KP_MKIN_0 MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_1 MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_2 MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_3 MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_4 MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_5 MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+#define GPIO125_KP_MKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO2_2_KP_MKIN_6 MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
+#define GPIO3_2_KP_MKIN_7 MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
+
+#define GPIO7_KP_MKOUT_5 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF3, DRIVE_HIGH)
+#define GPIO12_KP_MKOUT_6 MFP_CFG_LPM(GPIO12, AF3, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_7 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO19_KP_MKOUT_4 MFP_CFG_LPM(GPIO19, AF3, DRIVE_HIGH)
+#define GPIO20_KP_MKOUT_5 MFP_CFG_LPM(GPIO20, AF3, DRIVE_HIGH)
+#define GPIO38_KP_MKOUT_5 MFP_CFG_LPM(GPIO38, AF5, DRIVE_HIGH)
+#define GPIO53_KP_MKOUT_6 MFP_CFG_LPM(GPIO53, AF5, DRIVE_HIGH)
+#define GPIO78_KP_MKOUT_7 MFP_CFG_LPM(GPIO78, AF5, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_0 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_1 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO87_KP_MKOUT_2 MFP_CFG_LPM(GPIO87, AF2, DRIVE_HIGH)
+#define GPIO88_KP_MKOUT_3 MFP_CFG_LPM(GPIO88, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_6 MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_7 MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
+#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_7 MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_6 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+#define GPIO4_2_KP_MKOUT_5 MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
+#define GPIO6_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO54_LCD_LDD_0 MFP_CFG_DRV(GPIO54, AF1, DS01X)
+#define GPIO55_LCD_LDD_1 MFP_CFG_DRV(GPIO55, AF1, DS01X)
+#define GPIO56_LCD_LDD_2 MFP_CFG_DRV(GPIO56, AF1, DS01X)
+#define GPIO57_LCD_LDD_3 MFP_CFG_DRV(GPIO57, AF1, DS01X)
+#define GPIO58_LCD_LDD_4 MFP_CFG_DRV(GPIO58, AF1, DS01X)
+#define GPIO59_LCD_LDD_5 MFP_CFG_DRV(GPIO59, AF1, DS01X)
+#define GPIO60_LCD_LDD_6 MFP_CFG_DRV(GPIO60, AF1, DS01X)
+#define GPIO61_LCD_LDD_7 MFP_CFG_DRV(GPIO61, AF1, DS01X)
+#define GPIO62_LCD_LDD_8 MFP_CFG_DRV(GPIO62, AF1, DS01X)
+#define GPIO63_LCD_LDD_9 MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_10 MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_11 MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_12 MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_13 MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_14 MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_15 MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_16 MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X)
+#define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X)
+#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS01X)
+#define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X)
+#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X)
+
+#define GPIO15_LCD_CS_N MFP_CFG_DRV(GPIO15, AF2, DS01X)
+#define GPIO127_LCD_CS_N MFP_CFG_DRV(GPIO127, AF1, DS01X)
+#define GPIO63_LCD_VSYNC MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+/* Mini-LCD */
+#define GPIO72_MLCD_FCLK MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_LCLK MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO54_MLCD_LDD_0 MFP_CFG_DRV(GPIO54, AF7, DS08X)
+#define GPIO55_MLCD_LDD_1 MFP_CFG_DRV(GPIO55, AF7, DS08X)
+#define GPIO56_MLCD_LDD_2 MFP_CFG_DRV(GPIO56, AF7, DS08X)
+#define GPIO57_MLCD_LDD_3 MFP_CFG_DRV(GPIO57, AF7, DS08X)
+#define GPIO58_MLCD_LDD_4 MFP_CFG_DRV(GPIO58, AF7, DS08X)
+#define GPIO59_MLCD_LDD_5 MFP_CFG_DRV(GPIO59, AF7, DS08X)
+#define GPIO60_MLCD_LDD_6 MFP_CFG_DRV(GPIO60, AF7, DS08X)
+#define GPIO61_MLCD_LDD_7 MFP_CFG_DRV(GPIO61, AF7, DS08X)
+#define GPIO62_MLCD_LDD_8 MFP_CFG_DRV(GPIO62, AF7, DS08X)
+#define GPIO63_MLCD_LDD_9 MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_LDD_10 MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_LDD_11 MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_LDD_12 MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_LDD_13 MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_LDD_14 MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_LDD_15 MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO74_MLCD_PCLK MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO75_MLCD_BIAS MFP_CFG_DRV(GPIO75, AF2, DS08X)
+
+/* MMC1 */
+#define GPIO7_MMC1_CLK MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_CMD MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH)
+#define GPIO14_MMC1_CMD MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
+#define GPIO15_MMC1_CMD MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
+#define GPIO3_MMC1_DAT0 MFP_CFG_LPM(GPIO3, AF4, DRIVE_HIGH)
+#define GPIO4_MMC1_DAT1 MFP_CFG_LPM(GPIO4, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT2 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT3 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH)
+
+/* MMC2 */
+#define GPIO9_MMC2_DAT0 MFP_CFG_LPM(GPIO9, AF4, PULL_HIGH)
+#define GPIO10_MMC2_DAT1 MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
+#define GPIO11_MMC2_DAT2 MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
+#define GPIO12_MMC2_DAT3 MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
+#define GPIO13_MMC2_CLK MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
+#define GPIO14_MMC2_CMD MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT0 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT1 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+#define GPIO79_MMC2_DAT2 MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_DAT3 MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+#define GPIO81_MMC2_CLK MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
+#define GPIO82_MMC2_CMD MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
+
+/* SSP1 */
+#define GPIO89_SSP1_EXTCLK MFP_CFG(GPIO89, AF1)
+#define GPIO90_SSP1_SYSCLK MFP_CFG(GPIO90, AF1)
+#define GPIO15_SSP1_SCLK MFP_CFG(GPIO15, AF6)
+#define GPIO16_SSP1_FRM MFP_CFG(GPIO16, AF2)
+#define GPIO33_SSP1_SCLK MFP_CFG(GPIO33, AF5)
+#define GPIO34_SSP1_FRM MFP_CFG(GPIO34, AF5)
+#define GPIO85_SSP1_SCLK MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_FRM MFP_CFG(GPIO86, AF1)
+#define GPIO18_SSP1_TXD MFP_CFG(GPIO18, AF7)
+#define GPIO18_SSP1_RXD MFP_CFG(GPIO18, AF2)
+#define GPIO20_SSP1_TXD MFP_CFG(GPIO20, AF2)
+#define GPIO20_SSP1_RXD MFP_CFG(GPIO20, AF7)
+#define GPIO35_SSP1_TXD MFP_CFG(GPIO35, AF5)
+#define GPIO35_SSP1_RXD MFP_CFG(GPIO35, AF4)
+#define GPIO36_SSP1_TXD MFP_CFG(GPIO36, AF5)
+#define GPIO36_SSP1_RXD MFP_CFG(GPIO36, AF6)
+#define GPIO87_SSP1_TXD MFP_CFG(GPIO87, AF1)
+#define GPIO87_SSP1_RXD MFP_CFG(GPIO87, AF6)
+#define GPIO88_SSP1_TXD MFP_CFG(GPIO88, AF6)
+#define GPIO88_SSP1_RXD MFP_CFG(GPIO88, AF1)
+
+/* SSP2 */
+#define GPIO29_SSP2_EXTCLK MFP_CFG(GPIO29, AF2)
+#define GPIO23_SSP2_SCLK MFP_CFG(GPIO23, AF2)
+#define GPIO17_SSP2_FRM MFP_CFG(GPIO17, AF2)
+#define GPIO25_SSP2_SCLK MFP_CFG(GPIO25, AF2)
+#define GPIO26_SSP2_FRM MFP_CFG(GPIO26, AF2)
+#define GPIO33_SSP2_SCLK MFP_CFG(GPIO33, AF6)
+#define GPIO34_SSP2_FRM MFP_CFG(GPIO34, AF6)
+#define GPIO64_SSP2_SCLK MFP_CFG(GPIO64, AF2)
+#define GPIO65_SSP2_FRM MFP_CFG(GPIO65, AF2)
+#define GPIO19_SSP2_TXD MFP_CFG(GPIO19, AF2)
+#define GPIO19_SSP2_RXD MFP_CFG(GPIO19, AF7)
+#define GPIO24_SSP2_TXD MFP_CFG(GPIO24, AF5)
+#define GPIO24_SSP2_RXD MFP_CFG(GPIO24, AF4)
+#define GPIO27_SSP2_TXD MFP_CFG(GPIO27, AF2)
+#define GPIO27_SSP2_RXD MFP_CFG(GPIO27, AF5)
+#define GPIO28_SSP2_TXD MFP_CFG(GPIO28, AF5)
+#define GPIO28_SSP2_RXD MFP_CFG(GPIO28, AF2)
+#define GPIO35_SSP2_TXD MFP_CFG(GPIO35, AF7)
+#define GPIO35_SSP2_RXD MFP_CFG(GPIO35, AF6)
+#define GPIO66_SSP2_TXD MFP_CFG(GPIO66, AF4)
+#define GPIO66_SSP2_RXD MFP_CFG(GPIO66, AF2)
+#define GPIO67_SSP2_TXD MFP_CFG(GPIO67, AF2)
+#define GPIO67_SSP2_RXD MFP_CFG(GPIO67, AF4)
+#define GPIO36_SSP2_TXD MFP_CFG(GPIO36, AF7)
+
+/* SSP3 */
+#define GPIO69_SSP3_FRM MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
+#define GPIO68_SSP3_SCLK MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
+#define GPIO92_SSP3_FRM MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_SCLK MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
+#define GPIO70_SSP3_TXD MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO70_SSP3_RXD MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
+#define GPIO93_SSP3_TXD MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
+#define GPIO93_SSP3_RXD MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
+#define GPIO94_SSP3_TXD MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
+#define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+
+/* SSP4 */
+#define GPIO95_SSP4_SCLK MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_FRM MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO97_SSP4_TXD MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
+#define GPIO97_SSP4_RXD MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
+#define GPIO98_SSP4_TXD MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
+#define GPIO98_SSP4_RXD MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
+
+/* UART1 */
+#define GPIO32_UART1_CTS MFP_CFG_LPM(GPIO32, AF2, FLOAT)
+#define GPIO37_UART1_CTS MFP_CFG_LPM(GPIO37, AF4, FLOAT)
+#define GPIO79_UART1_CTS MFP_CFG_LPM(GPIO79, AF1, FLOAT)
+#define GPIO84_UART1_CTS MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO101_UART1_CTS MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO106_UART1_CTS MFP_CFG_LPM(GPIO106, AF6, FLOAT)
+
+#define GPIO32_UART1_RTS MFP_CFG_LPM(GPIO32, AF4, FLOAT)
+#define GPIO37_UART1_RTS MFP_CFG_LPM(GPIO37, AF2, FLOAT)
+#define GPIO79_UART1_RTS MFP_CFG_LPM(GPIO79, AF3, FLOAT)
+#define GPIO84_UART1_RTS MFP_CFG_LPM(GPIO84, AF1, FLOAT)
+#define GPIO101_UART1_RTS MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO106_UART1_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+
+#define GPIO34_UART1_DSR MFP_CFG_LPM(GPIO34, AF2, FLOAT)
+#define GPIO36_UART1_DSR MFP_CFG_LPM(GPIO36, AF4, FLOAT)
+#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF1, FLOAT)
+#define GPIO83_UART1_DSR MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO105_UART1_DSR MFP_CFG_LPM(GPIO105, AF6, FLOAT)
+
+#define GPIO34_UART1_DTR MFP_CFG_LPM(GPIO34, AF4, FLOAT)
+#define GPIO36_UART1_DTR MFP_CFG_LPM(GPIO36, AF2, FLOAT)
+#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF3, FLOAT)
+#define GPIO83_UART1_DTR MFP_CFG_LPM(GPIO83, AF1, FLOAT)
+#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO105_UART1_DTR MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+
+#define GPIO35_UART1_RI MFP_CFG_LPM(GPIO35, AF2, FLOAT)
+#define GPIO82_UART1_RI MFP_CFG_LPM(GPIO82, AF1, FLOAT)
+#define GPIO104_UART1_RI MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+
+#define GPIO33_UART1_DCD MFP_CFG_LPM(GPIO33, AF2, FLOAT)
+#define GPIO80_UART1_DCD MFP_CFG_LPM(GPIO80, AF1, FLOAT)
+#define GPIO102_UART1_DCD MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+#define GPIO30_UART1_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO31_UART1_RXD MFP_CFG_LPM(GPIO31, AF4, FLOAT)
+#define GPIO77_UART1_RXD MFP_CFG_LPM(GPIO77, AF1, FLOAT)
+#define GPIO78_UART1_RXD MFP_CFG_LPM(GPIO78, AF3, FLOAT)
+#define GPIO99_UART1_RXD MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO100_UART1_RXD MFP_CFG_LPM(GPIO100, AF6, FLOAT)
+#define GPIO102_UART1_RXD MFP_CFG_LPM(GPIO102, AF6, FLOAT)
+#define GPIO104_UART1_RXD MFP_CFG_LPM(GPIO104, AF4, FLOAT)
+
+#define GPIO30_UART1_TXD MFP_CFG_LPM(GPIO30, AF4, FLOAT)
+#define GPIO31_UART1_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO77_UART1_TXD MFP_CFG_LPM(GPIO77, AF3, FLOAT)
+#define GPIO78_UART1_TXD MFP_CFG_LPM(GPIO78, AF1, FLOAT)
+#define GPIO99_UART1_TXD MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO100_UART1_TXD MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO102_UART1_TXD MFP_CFG_LPM(GPIO102, AF4, FLOAT)
+
+/* UART2 */
+#define GPIO15_UART2_CTS MFP_CFG_LPM(GPIO15, AF3, FLOAT)
+#define GPIO16_UART2_CTS MFP_CFG_LPM(GPIO16, AF5, FLOAT)
+#define GPIO111_UART2_CTS MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO114_UART2_CTS MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+
+#define GPIO15_UART2_RTS MFP_CFG_LPM(GPIO15, AF4, FLOAT)
+#define GPIO16_UART2_RTS MFP_CFG_LPM(GPIO16, AF4, FLOAT)
+#define GPIO114_UART2_RTS MFP_CFG_LPM(GPIO114, AF3, FLOAT)
+#define GPIO111_UART2_RTS MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+#define GPIO18_UART2_RXD MFP_CFG_LPM(GPIO18, AF5, FLOAT)
+#define GPIO19_UART2_RXD MFP_CFG_LPM(GPIO19, AF4, FLOAT)
+#define GPIO112_UART2_RXD MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO113_UART2_RXD MFP_CFG_LPM(GPIO113, AF3, FLOAT)
+
+#define GPIO18_UART2_TXD MFP_CFG_LPM(GPIO18, AF4, FLOAT)
+#define GPIO19_UART2_TXD MFP_CFG_LPM(GPIO19, AF5, FLOAT)
+#define GPIO112_UART2_TXD MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO113_UART2_TXD MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO91_UART3_CTS MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_CTS MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_CTS MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_CTS MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+#define GPIO91_UART3_RTS MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO92_UART3_RTS MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO107_UART3_RTS MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO108_UART3_RTS MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+
+#define GPIO7_UART3_RXD MFP_CFG_LPM(GPIO7, AF2, FLOAT)
+#define GPIO8_UART3_RXD MFP_CFG_LPM(GPIO8, AF6, FLOAT)
+#define GPIO93_UART3_RXD MFP_CFG_LPM(GPIO93, AF4, FLOAT)
+#define GPIO94_UART3_RXD MFP_CFG_LPM(GPIO94, AF2, FLOAT)
+#define GPIO109_UART3_RXD MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO110_UART3_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+
+#define GPIO7_UART3_TXD MFP_CFG_LPM(GPIO7, AF6, FLOAT)
+#define GPIO8_UART3_TXD MFP_CFG_LPM(GPIO8, AF2, FLOAT)
+#define GPIO93_UART3_TXD MFP_CFG_LPM(GPIO93, AF2, FLOAT)
+#define GPIO94_UART3_TXD MFP_CFG_LPM(GPIO94, AF4, FLOAT)
+#define GPIO109_UART3_TXD MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO110_UART3_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+
+/* USB Host */
+#define GPIO0_2_USBH_PEN MFP_CFG(GPIO0_2, AF1)
+#define GPIO1_2_USBH_PWR MFP_CFG(GPIO1_2, AF1)
+
+/* USB P3 */
+#define GPIO77_USB_P3_1 MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_2 MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_3 MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_4 MFP_CFG(GPIO80, AF2)
+#define GPIO81_USB_P3_5 MFP_CFG(GPIO81, AF2)
+#define GPIO82_USB_P3_6 MFP_CFG(GPIO82, AF2)
+
+/* PWM */
+#define GPIO17_PWM0_OUT MFP_CFG(GPIO17, AF1)
+#define GPIO18_PWM1_OUT MFP_CFG(GPIO18, AF1)
+#define GPIO19_PWM2_OUT MFP_CFG(GPIO19, AF1)
+#define GPIO20_PWM3_OUT MFP_CFG(GPIO20, AF1)
+
+/* CIR */
+#define GPIO8_CIR_OUT MFP_CFG(GPIO8, AF5)
+#define GPIO16_CIR_OUT MFP_CFG(GPIO16, AF3)
+
+#define GPIO20_OW_DQ_IN MFP_CFG(GPIO20, AF5)
+#define GPIO126_OW_DQ MFP_CFG(GPIO126, AF2)
+
+#define GPIO0_DF_RDY MFP_CFG(GPIO0, AF1)
+#define GPIO7_CLK_BYPASS_XSC MFP_CFG(GPIO7, AF7)
+#define GPIO17_EXT_SYNC_MVT_0 MFP_CFG(GPIO17, AF6)
+#define GPIO18_EXT_SYNC_MVT_1 MFP_CFG(GPIO18, AF6)
+#define GPIO19_OST_CHOUT_MVT_0 MFP_CFG(GPIO19, AF6)
+#define GPIO20_OST_CHOUT_MVT_1 MFP_CFG(GPIO20, AF6)
+#define GPIO49_48M_CLK MFP_CFG(GPIO49, AF2)
+#define GPIO126_EXT_CLK MFP_CFG(GPIO126, AF3)
+#define GPIO127_CLK_BYPASS_GB MFP_CFG(GPIO127, AF7)
+#define GPIO71_EXT_MATCH_MVT MFP_CFG(GPIO71, AF6)
+
+#define GPIO3_uIO_IN MFP_CFG(GPIO3, AF1)
+
+#define GPIO4_uSIM_CARD_STATE MFP_CFG(GPIO4, AF1)
+#define GPIO5_uSIM_uCLK MFP_CFG(GPIO5, AF1)
+#define GPIO6_uSIM_uRST MFP_CFG(GPIO6, AF1)
+#define GPIO16_uSIM_UVS_0 MFP_CFG(GPIO16, AF1)
+
+#define GPIO9_SCIO MFP_CFG(GPIO9, AF1)
+#define GPIO20_RTC_MVT MFP_CFG(GPIO20, AF4)
+#define GPIO126_RTC_MVT MFP_CFG(GPIO126, AF1)
+
+/*
+ * PXA300 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA300
+#define GPIO99_USB_P2_2 MFP_CFG(GPIO99, AF2)
+#define GPIO99_USB_P2_5 MFP_CFG(GPIO99, AF3)
+#define GPIO99_USB_P2_6 MFP_CFG(GPIO99, AF4)
+#define GPIO100_USB_P2_2 MFP_CFG(GPIO100, AF4)
+#define GPIO100_USB_P2_5 MFP_CFG(GPIO100, AF5)
+#define GPIO101_USB_P2_1 MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_4 MFP_CFG(GPIO102, AF2)
+#define GPIO104_USB_P2_3 MFP_CFG(GPIO104, AF2)
+#define GPIO105_USB_P2_5 MFP_CFG(GPIO105, AF2)
+#define GPIO100_USB_P2_6 MFP_CFG(GPIO100, AF2)
+#define GPIO106_USB_P2_7 MFP_CFG(GPIO106, AF2)
+#define GPIO103_USB_P2_8 MFP_CFG(GPIO103, AF2)
+
+/* U2D UTMI */
+#define GPIO38_UTM_CLK MFP_CFG(GPIO38, AF1)
+#define GPIO26_U2D_RXERROR MFP_CFG(GPIO26, AF3)
+#define GPIO50_U2D_RXERROR MFP_CFG(GPIO50, AF1)
+#define GPIO89_U2D_RXERROR MFP_CFG(GPIO89, AF5)
+#define GPIO24_UTM_RXVALID MFP_CFG(GPIO24, AF3)
+#define GPIO48_UTM_RXVALID MFP_CFG(GPIO48, AF2)
+#define GPIO87_UTM_RXVALID MFP_CFG(GPIO87, AF5)
+#define GPIO25_UTM_RXACTIVE MFP_CFG(GPIO25, AF3)
+#define GPIO47_UTM_RXACTIVE MFP_CFG(GPIO47, AF2)
+#define GPIO49_UTM_RXACTIVE MFP_CFG(GPIO49, AF1)
+#define GPIO88_UTM_RXACTIVE MFP_CFG(GPIO88, AF5)
+#define GPIO53_UTM_TXREADY MFP_CFG(GPIO53, AF1)
+#define GPIO67_UTM_LINESTATE_0 MFP_CFG(GPIO67, AF3)
+#define GPIO92_UTM_LINESTATE_0 MFP_CFG(GPIO92, AF3)
+#define GPIO104_UTM_LINESTATE_0 MFP_CFG(GPIO104, AF3)
+#define GPIO109_UTM_LINESTATE_0 MFP_CFG(GPIO109, AF4)
+#define GPIO68_UTM_LINESTATE_1 MFP_CFG(GPIO68, AF3)
+#define GPIO93_UTM_LINESTATE_1 MFP_CFG(GPIO93, AF3)
+#define GPIO105_UTM_LINESTATE_1 MFP_CFG(GPIO105, AF3)
+#define GPIO27_U2D_OPMODE_0 MFP_CFG(GPIO27, AF4)
+#define GPIO51_U2D_OPMODE_0 MFP_CFG(GPIO51, AF2)
+#define GPIO90_U2D_OPMODE_0 MFP_CFG(GPIO90, AF7)
+#define GPIO28_U2D_OPMODE_1 MFP_CFG(GPIO28, AF4)
+#define GPIO52_U2D_OPMODE_1 MFP_CFG(GPIO52, AF2)
+#define GPIO106_U2D_OPMODE_1 MFP_CFG(GPIO106, AF3)
+#define GPIO110_U2D_OPMODE_1 MFP_CFG(GPIO110, AF5)
+#define GPIO76_U2D_RESET MFP_CFG(GPIO76, AF1)
+#define GPIO95_U2D_RESET MFP_CFG(GPIO95, AF2)
+#define GPIO100_U2D_RESET MFP_CFG(GPIO100, AF3)
+#define GPIO66_U2D_SUSPEND MFP_CFG(GPIO66, AF3)
+#define GPIO98_U2D_SUSPEND MFP_CFG(GPIO98, AF2)
+#define GPIO103_U2D_SUSPEND MFP_CFG(GPIO103, AF3)
+#define GPIO65_U2D_TERM_SEL MFP_CFG(GPIO65, AF5)
+#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF3)
+#define GPIO102_U2D_TERM_SEL MFP_CFG(GPIO102, AF5)
+#define GPIO29_U2D_TXVALID MFP_CFG(GPIO29, AF3)
+#define GPIO52_U2D_TXVALID MFP_CFG(GPIO52, AF4)
+#define GPIO69_U2D_TXVALID MFP_CFG(GPIO69, AF3)
+#define GPIO85_U2D_TXVALID MFP_CFG(GPIO85, AF7)
+#define GPIO64_U2D_XCVR_SEL MFP_CFG(GPIO64, AF5)
+#define GPIO96_U2D_XCVR_SEL MFP_CFG(GPIO96, AF3)
+#define GPIO101_U2D_XCVR_SEL MFP_CFG(GPIO101, AF5)
+#define GPIO30_UTM_PHYDATA_0 MFP_CFG(GPIO30, AF3)
+#define GPIO31_UTM_PHYDATA_1 MFP_CFG(GPIO31, AF3)
+#define GPIO32_UTM_PHYDATA_2 MFP_CFG(GPIO32, AF3)
+#define GPIO33_UTM_PHYDATA_3 MFP_CFG(GPIO33, AF3)
+#define GPIO34_UTM_PHYDATA_4 MFP_CFG(GPIO34, AF3)
+#define GPIO35_UTM_PHYDATA_5 MFP_CFG(GPIO35, AF3)
+#define GPIO36_UTM_PHYDATA_6 MFP_CFG(GPIO36, AF3)
+#define GPIO37_UTM_PHYDATA_7 MFP_CFG(GPIO37, AF3)
+#define GPIO39_UTM_PHYDATA_0 MFP_CFG(GPIO39, AF3)
+#define GPIO40_UTM_PHYDATA_1 MFP_CFG(GPIO40, AF3)
+#define GPIO41_UTM_PHYDATA_2 MFP_CFG(GPIO41, AF3)
+#define GPIO42_UTM_PHYDATA_3 MFP_CFG(GPIO42, AF3)
+#define GPIO43_UTM_PHYDATA_4 MFP_CFG(GPIO43, AF3)
+#define GPIO44_UTM_PHYDATA_5 MFP_CFG(GPIO44, AF3)
+#define GPIO45_UTM_PHYDATA_6 MFP_CFG(GPIO45, AF3)
+#define GPIO46_UTM_PHYDATA_7 MFP_CFG(GPIO46, AF3)
+#endif /* CONFIG_CPU_PXA300 */
+
+/*
+ * PXA310 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA310
+/* USB P2 */
+#define GPIO36_USB_P2_1 MFP_CFG(GPIO36, AF1)
+#define GPIO30_USB_P2_2 MFP_CFG(GPIO30, AF1)
+#define GPIO35_USB_P2_3 MFP_CFG(GPIO35, AF1)
+#define GPIO32_USB_P2_4 MFP_CFG(GPIO32, AF1)
+#define GPIO34_USB_P2_5 MFP_CFG(GPIO34, AF1)
+#define GPIO31_USB_P2_6 MFP_CFG(GPIO31, AF1)
+
+/* MMC1 */
+#define GPIO24_MMC1_CMD MFP_CFG(GPIO24, AF3)
+#define GPIO29_MMC1_DAT0 MFP_CFG(GPIO29, AF3)
+
+/* MMC3 */
+#define GPIO103_MMC3_CLK MFP_CFG(GPIO103, AF2)
+#define GPIO105_MMC3_CMD MFP_CFG(GPIO105, AF2)
+#define GPIO11_2_MMC3_CLK MFP_CFG(GPIO11_2, AF1)
+#define GPIO12_2_MMC3_CMD MFP_CFG(GPIO12_2, AF1)
+#define GPIO7_2_MMC3_DAT0 MFP_CFG(GPIO7_2, AF1)
+#define GPIO8_2_MMC3_DAT1 MFP_CFG(GPIO8_2, AF1)
+#define GPIO9_2_MMC3_DAT2 MFP_CFG(GPIO9_2, AF1)
+#define GPIO10_2_MMC3_DAT3 MFP_CFG(GPIO10_2, AF1)
+
+/* ULPI */
+#define GPIO38_ULPI_CLK MFP_CFG(GPIO38, AF1)
+#define GPIO30_ULPI_DATA_OUT_0 MFP_CFG(GPIO30, AF3)
+#define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3)
+#define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3)
+#define GPIO33_ULPI_DATA_OUT_3 MFP_CFG(GPIO33, AF3)
+#define GPIO34_ULPI_DATA_OUT_4 MFP_CFG(GPIO34, AF3)
+#define GPIO35_ULPI_DATA_OUT_5 MFP_CFG(GPIO35, AF3)
+#define GPIO36_ULPI_DATA_OUT_6 MFP_CFG(GPIO36, AF3)
+#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3)
+#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1)
+
+#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
+#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
+#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#endif /* CONFIG_CPU_PXA310 */
+
+#endif /* __ASM_ARCH_MFP_PXA300_H */
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-pxa/mfp-pxa320.h
+ *
+ * PXA320 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA320_H
+#define __ASM_ARCH_MFP_PXA320_H
+
+#include <asm/arch/mfp.h>
+
+/* GPIO */
+#define GPIO46_GPIO MFP_CFG(GPIO6, AF0)
+#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
+
+#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0)
+#define GPIO13_2_GPIO MFP_CFG(GPIO13_2, AF0)
+#define GPIO14_2_GPIO MFP_CFG(GPIO14_2, AF0)
+#define GPIO15_2_GPIO MFP_CFG(GPIO15_2, AF0)
+#define GPIO16_2_GPIO MFP_CFG(GPIO16_2, AF0)
+#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0)
+
+/* Chip Select */
+#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1)
+
+/* AC97 */
+#define GPIO34_AC97_SYSCLK MFP_CFG(GPIO34, AF1)
+#define GPIO39_AC97_BITCLK MFP_CFG(GPIO39, AF1)
+#define GPIO40_AC97_nACRESET MFP_CFG(GPIO40, AF1)
+#define GPIO35_AC97_SDATA_IN_0 MFP_CFG(GPIO35, AF1)
+#define GPIO36_AC97_SDATA_IN_1 MFP_CFG(GPIO36, AF1)
+#define GPIO32_AC97_SDATA_IN_2 MFP_CFG(GPIO32, AF2)
+#define GPIO33_AC97_SDATA_IN_3 MFP_CFG(GPIO33, AF2)
+#define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3)
+#define GPIO12_AC97_SDATA_IN_3 MFP_CFG(GPIO12, AF3)
+#define GPIO37_AC97_SDATA_OUT MFP_CFG(GPIO37, AF1)
+#define GPIO38_AC97_SYNC MFP_CFG(GPIO38, AF1)
+
+/* I2C */
+#define GPIO32_I2C_SCL MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
+#define GPIO33_I2C_SDA MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO49_CI_DD_0 MFP_CFG_DRV(GPIO49, AF1, DS04X)
+#define GPIO50_CI_DD_1 MFP_CFG_DRV(GPIO50, AF1, DS04X)
+#define GPIO51_CI_DD_2 MFP_CFG_DRV(GPIO51, AF1, DS04X)
+#define GPIO52_CI_DD_3 MFP_CFG_DRV(GPIO52, AF1, DS04X)
+#define GPIO53_CI_DD_4 MFP_CFG_DRV(GPIO53, AF1, DS04X)
+#define GPIO54_CI_DD_5 MFP_CFG_DRV(GPIO54, AF1, DS04X)
+#define GPIO55_CI_DD_6 MFP_CFG_DRV(GPIO55, AF1, DS04X)
+#define GPIO56_CI_DD_7 MFP_CFG_DRV(GPIO56, AF0, DS04X)
+#define GPIO57_CI_DD_8 MFP_CFG_DRV(GPIO57, AF1, DS04X)
+#define GPIO58_CI_DD_9 MFP_CFG_DRV(GPIO58, AF1, DS04X)
+#define GPIO59_CI_MCLK MFP_CFG_DRV(GPIO59, AF0, DS04X)
+#define GPIO60_CI_PCLK MFP_CFG_DRV(GPIO60, AF0, DS04X)
+#define GPIO61_CI_HSYNC MFP_CFG_DRV(GPIO61, AF0, DS04X)
+#define GPIO62_CI_VSYNC MFP_CFG_DRV(GPIO62, AF0, DS04X)
+
+#define GPIO31_CIR_OUT MFP_CFG(GPIO31, AF5)
+
+#define GPIO0_2_CLK_EXT MFP_CFG(GPIO0_2, AF3)
+#define GPIO0_DRQ MFP_CFG(GPIO0, AF2)
+#define GPIO11_EXT_SYNC0 MFP_CFG(GPIO11, AF5)
+#define GPIO12_EXT_SYNC1 MFP_CFG(GPIO12, AF6)
+#define GPIO0_2_HZ_CLK MFP_CFG(GPIO0_2, AF1)
+#define GPIO14_HZ_CLK MFP_CFG(GPIO14, AF4)
+#define GPIO30_ICP_RXD MFP_CFG(GPIO30, AF1)
+#define GPIO31_ICP_TXD MFP_CFG(GPIO31, AF1)
+
+#define GPIO83_KP_DKIN_0 MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO85_KP_DKIN_2 MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_3 MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+
+#define GPIO105_KP_DKIN_0 MFP_CFG_LPM(GPIO105, AF2, FLOAT)
+#define GPIO106_KP_DKIN_1 MFP_CFG_LPM(GPIO106, AF2, FLOAT)
+#define GPIO107_KP_DKIN_2 MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_3 MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_4 MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_5 MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_6 MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_7 MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+
+#define GPIO113_KP_DKIN_0 MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_1 MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_2 MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_3 MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_4 MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_5 MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_6 MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_7 MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+
+#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF2, FLOAT)
+#define GPIO126_KP_DKIN_1 MFP_CFG_LPM(GPIO126, AF2, FLOAT)
+
+#define GPIO2_2_KP_DKIN_0 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_1 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO125_KP_DKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_7 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+
+#define GPIO113_KP_MKIN_0 MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+#define GPIO114_KP_MKIN_1 MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+#define GPIO115_KP_MKIN_2 MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_3 MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_4 MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_5 MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_6 MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_7 MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+
+#define GPIO83_KP_MKOUT_0 MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO84_KP_MKOUT_1 MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_2 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_3 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_4 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO14_KP_MKOUT_5 MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
+
+#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_5 MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
+#define GPIO127_KP_MKOUT_6 MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO6_2_LCD_LDD_0 MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
+#define GPIO7_2_LCD_LDD_1 MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
+#define GPIO8_2_LCD_LDD_2 MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
+#define GPIO9_2_LCD_LDD_3 MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
+#define GPIO10_2_LCD_LDD_4 MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
+#define GPIO11_2_LCD_LDD_5 MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
+#define GPIO12_2_LCD_LDD_6 MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
+#define GPIO13_2_LCD_LDD_7 MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
+#define GPIO63_LCD_LDD_8 MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_9 MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_10 MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_11 MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_12 MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_13 MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_14 MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_15 MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_16 MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO72_LCD_LDD_17 MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_CS_N MFP_CFG_DRV(GPIO73, AF2, DS01X)
+#define GPIO74_LCD_VSYNC MFP_CFG_DRV(GPIO74, AF2, DS01X)
+#define GPIO14_2_LCD_FCLK MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
+#define GPIO15_2_LCD_LCLK MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
+#define GPIO16_2_LCD_PCLK MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
+#define GPIO17_2_LCD_BIAS MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
+#define GPIO64_LCD_VSYNC MFP_CFG_DRV(GPIO64, AF2, DS01X)
+#define GPIO63_LCD_CS_N MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+#define GPIO6_2_MLCD_DD_0 MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
+#define GPIO7_2_MLCD_DD_1 MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
+#define GPIO8_2_MLCD_DD_2 MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
+#define GPIO9_2_MLCD_DD_3 MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
+#define GPIO10_2_MLCD_DD_4 MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
+#define GPIO11_2_MLCD_DD_5 MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
+#define GPIO12_2_MLCD_DD_6 MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
+#define GPIO13_2_MLCD_DD_7 MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
+#define GPIO63_MLCD_DD_8 MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_DD_9 MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_DD_10 MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_DD_11 MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_DD_12 MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_DD_13 MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_DD_14 MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO70_MLCD_DD_15 MFP_CFG_DRV(GPIO70, AF7, DS08X)
+#define GPIO71_MLCD_DD_16 MFP_CFG_DRV(GPIO71, AF7, DS08X)
+#define GPIO72_MLCD_DD_17 MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_CS MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO74_MLCD_VSYNC MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO14_2_MLCD_FCLK MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
+#define GPIO15_2_MLCD_LCLK MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
+#define GPIO16_2_MLCD_PCLK MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
+#define GPIO17_2_MLCD_BIAS MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
+
+/* MMC1 */
+#define GPIO9_MMC1_CMD MFP_CFG_LPM(GPIO9, AF4, DRIVE_HIGH)
+#define GPIO22_MMC1_CLK MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
+#define GPIO23_MMC1_CMD MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
+#define GPIO30_MMC1_CLK MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
+#define GPIO31_MMC1_CMD MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT0 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT1 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH)
+#define GPIO7_MMC1_DAT2 MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_DAT3 MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH)
+#define GPIO18_MMC1_DAT0 MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
+#define GPIO19_MMC1_DAT1 MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
+#define GPIO20_MMC1_DAT2 MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
+#define GPIO21_MMC1_DAT3 MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
+
+#define GPIO28_MMC2_CLK MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
+#define GPIO29_MMC2_CMD MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
+#define GPIO30_MMC2_CLK MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
+#define GPIO31_MMC2_CMD MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
+#define GPIO79_MMC2_CLK MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_CMD MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+
+#define GPIO5_MMC2_DAT0 MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
+#define GPIO6_MMC2_DAT1 MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
+#define GPIO7_MMC2_DAT2 MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
+#define GPIO8_MMC2_DAT3 MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
+#define GPIO24_MMC2_DAT0 MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
+#define GPIO75_MMC2_DAT0 MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
+#define GPIO25_MMC2_DAT1 MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
+#define GPIO76_MMC2_DAT1 MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
+#define GPIO26_MMC2_DAT2 MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT2 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO27_MMC2_DAT3 MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT3 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+
+/* 1-Wire */
+#define GPIO14_ONE_WIRE MFP_CFG_LPM(GPIO14, AF5, FLOAT)
+#define GPIO0_2_ONE_WIRE MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+
+/* SSP1 */
+#define GPIO87_SSP1_EXTCLK MFP_CFG(GPIO87, AF1)
+#define GPIO88_SSP1_SYSCLK MFP_CFG(GPIO88, AF1)
+#define GPIO83_SSP1_SCLK MFP_CFG(GPIO83, AF1)
+#define GPIO84_SSP1_SFRM MFP_CFG(GPIO84, AF1)
+#define GPIO85_SSP1_RXD MFP_CFG(GPIO85, AF6)
+#define GPIO85_SSP1_TXD MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_RXD MFP_CFG(GPIO86, AF1)
+#define GPIO86_SSP1_TXD MFP_CFG(GPIO86, AF6)
+
+/* SSP2 */
+#define GPIO39_SSP2_EXTCLK MFP_CFG(GPIO39, AF2)
+#define GPIO40_SSP2_SYSCLK MFP_CFG(GPIO40, AF2)
+#define GPIO12_SSP2_SCLK MFP_CFG(GPIO12, AF2)
+#define GPIO35_SSP2_SCLK MFP_CFG(GPIO35, AF2)
+#define GPIO36_SSP2_SFRM MFP_CFG(GPIO36, AF2)
+#define GPIO37_SSP2_RXD MFP_CFG(GPIO37, AF5)
+#define GPIO37_SSP2_TXD MFP_CFG(GPIO37, AF2)
+#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2)
+#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5)
+
+#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
+#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
+#define GPIO72_SSP3_TXD MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_RXD MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
+#define GPIO91_SSP3_TXD MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
+#define GPIO92_SSP3_RXD MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
+#define GPIO92_SSP3_TXD MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
+
+#define GPIO93_SSP4_SCLK MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
+#define GPIO94_SSP4_FRM MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
+#define GPIO94_SSP4_RXD MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
+#define GPIO95_SSP4_RXD MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
+#define GPIO95_SSP4_TXD MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_RXD MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO96_SSP4_TXD MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
+
+/* UART1 */
+#define GPIO41_UART1_RXD MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT)
+#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT)
+#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT)
+#define GPIO98_UART1_TXD MFP_CFG_LPM(GPIO98, AF1, FLOAT)
+#define GPIO43_UART1_CTS MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT)
+#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT)
+#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT)
+#define GPIO104_UART1_RTS MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+#define GPIO45_UART1_DTR MFP_CFG_LPM(GPIO45, AF4, FLOAT)
+#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT)
+#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT)
+#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+/* UART2 */
+#define GPIO109_UART2_CTS MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO109_UART2_RTS MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO112_UART2_CTS MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO112_UART2_RTS MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO110_UART2_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+#define GPIO110_UART2_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+#define GPIO111_UART2_RXD MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO111_UART2_TXD MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO89_UART3_CTS MFP_CFG_LPM(GPIO89, AF2, FLOAT)
+#define GPIO89_UART3_RTS MFP_CFG_LPM(GPIO89, AF4, FLOAT)
+#define GPIO90_UART3_CTS MFP_CFG_LPM(GPIO90, AF4, FLOAT)
+#define GPIO90_UART3_RTS MFP_CFG_LPM(GPIO90, AF2, FLOAT)
+#define GPIO105_UART3_CTS MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+#define GPIO105_UART3_RTS MFP_CFG_LPM(GPIO105, AF3, FLOAT)
+#define GPIO106_UART3_CTS MFP_CFG_LPM(GPIO106, AF3, FLOAT)
+#define GPIO106_UART3_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+#define GPIO30_UART3_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO30_UART3_TXD MFP_CFG_LPM(GPIO30, AF6, FLOAT)
+#define GPIO31_UART3_RXD MFP_CFG_LPM(GPIO31, AF6, FLOAT)
+#define GPIO31_UART3_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO91_UART3_RXD MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO91_UART3_TXD MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_RXD MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO92_UART3_TXD MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_RXD MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO107_UART3_TXD MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_RXD MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+#define GPIO108_UART3_TXD MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+
+/* USB 2.0 UTMI */
+#define GPIO10_UTM_CLK MFP_CFG(GPIO10, AF1)
+#define GPIO36_U2D_RXERROR MFP_CFG(GPIO36, AF3)
+#define GPIO60_U2D_RXERROR MFP_CFG(GPIO60, AF1)
+#define GPIO87_U2D_RXERROR MFP_CFG(GPIO87, AF5)
+#define GPIO34_UTM_RXVALID MFP_CFG(GPIO34, AF3)
+#define GPIO58_UTM_RXVALID MFP_CFG(GPIO58, AF2)
+#define GPIO85_UTM_RXVALID MFP_CFG(GPIO85, AF5)
+#define GPIO35_UTM_RXACTIVE MFP_CFG(GPIO35, AF3)
+#define GPIO59_UTM_RXACTIVE MFP_CFG(GPIO59, AF1)
+#define GPIO86_UTM_RXACTIVE MFP_CFG(GPIO86, AF5)
+#define GPIO73_UTM_TXREADY MFP_CFG(GPIO73, AF1)
+#define GPIO68_UTM_LINESTATE_0 MFP_CFG(GPIO68, AF3)
+#define GPIO90_UTM_LINESTATE_0 MFP_CFG(GPIO90, AF3)
+#define GPIO102_UTM_LINESTATE_0 MFP_CFG(GPIO102, AF3)
+#define GPIO107_UTM_LINESTATE_0 MFP_CFG(GPIO107, AF4)
+#define GPIO69_UTM_LINESTATE_1 MFP_CFG(GPIO69, AF3)
+#define GPIO91_UTM_LINESTATE_1 MFP_CFG(GPIO91, AF3)
+#define GPIO103_UTM_LINESTATE_1 MFP_CFG(GPIO103, AF3)
+
+#define GPIO41_U2D_PHYDATA_0 MFP_CFG(GPIO41, AF3)
+#define GPIO42_U2D_PHYDATA_1 MFP_CFG(GPIO42, AF3)
+#define GPIO43_U2D_PHYDATA_2 MFP_CFG(GPIO43, AF3)
+#define GPIO44_U2D_PHYDATA_3 MFP_CFG(GPIO44, AF3)
+#define GPIO45_U2D_PHYDATA_4 MFP_CFG(GPIO45, AF3)
+#define GPIO46_U2D_PHYDATA_5 MFP_CFG(GPIO46, AF3)
+#define GPIO47_U2D_PHYDATA_6 MFP_CFG(GPIO47, AF3)
+#define GPIO48_U2D_PHYDATA_7 MFP_CFG(GPIO48, AF3)
+
+#define GPIO49_U2D_PHYDATA_0 MFP_CFG(GPIO49, AF3)
+#define GPIO50_U2D_PHYDATA_1 MFP_CFG(GPIO50, AF3)
+#define GPIO51_U2D_PHYDATA_2 MFP_CFG(GPIO51, AF3)
+#define GPIO52_U2D_PHYDATA_3 MFP_CFG(GPIO52, AF3)
+#define GPIO53_U2D_PHYDATA_4 MFP_CFG(GPIO53, AF3)
+#define GPIO54_U2D_PHYDATA_5 MFP_CFG(GPIO54, AF3)
+#define GPIO55_U2D_PHYDATA_6 MFP_CFG(GPIO55, AF3)
+#define GPIO56_U2D_PHYDATA_7 MFP_CFG(GPIO56, AF3)
+
+#define GPIO37_U2D_OPMODE0 MFP_CFG(GPIO37, AF4)
+#define GPIO61_U2D_OPMODE0 MFP_CFG(GPIO61, AF2)
+#define GPIO88_U2D_OPMODE0 MFP_CFG(GPIO88, AF7)
+
+#define GPIO38_U2D_OPMODE1 MFP_CFG(GPIO38, AF4)
+#define GPIO62_U2D_OPMODE1 MFP_CFG(GPIO62, AF2)
+#define GPIO104_U2D_OPMODE1 MFP_CFG(GPIO104, AF4)
+#define GPIO108_U2D_OPMODE1 MFP_CFG(GPIO108, AF5)
+
+#define GPIO74_U2D_RESET MFP_CFG(GPIO74, AF1)
+#define GPIO93_U2D_RESET MFP_CFG(GPIO93, AF2)
+#define GPIO98_U2D_RESET MFP_CFG(GPIO98, AF3)
+
+#define GPIO67_U2D_SUSPEND MFP_CFG(GPIO67, AF3)
+#define GPIO96_U2D_SUSPEND MFP_CFG(GPIO96, AF2)
+#define GPIO101_U2D_SUSPEND MFP_CFG(GPIO101, AF3)
+
+#define GPIO66_U2D_TERM_SEL MFP_CFG(GPIO66, AF5)
+#define GPIO95_U2D_TERM_SEL MFP_CFG(GPIO95, AF3)
+#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF7)
+#define GPIO100_U2D_TERM_SEL MFP_CFG(GPIO100, AF5)
+
+#define GPIO39_U2D_TXVALID MFP_CFG(GPIO39, AF4)
+#define GPIO70_U2D_TXVALID MFP_CFG(GPIO70, AF5)
+#define GPIO83_U2D_TXVALID MFP_CFG(GPIO83, AF7)
+
+#define GPIO65_U2D_XCVR_SEL MFP_CFG(GPIO65, AF5)
+#define GPIO94_U2D_XCVR_SEL MFP_CFG(GPIO94, AF3)
+#define GPIO99_U2D_XCVR_SEL MFP_CFG(GPIO99, AF5)
+
+/* USB Host 1.1 */
+#define GPIO2_2_USBH_PEN MFP_CFG(GPIO2_2, AF1)
+#define GPIO3_2_USBH_PWR MFP_CFG(GPIO3_2, AF1)
+
+/* USB P2 */
+#define GPIO97_USB_P2_2 MFP_CFG(GPIO97, AF2)
+#define GPIO97_USB_P2_6 MFP_CFG(GPIO97, AF4)
+#define GPIO98_USB_P2_2 MFP_CFG(GPIO98, AF4)
+#define GPIO98_USB_P2_6 MFP_CFG(GPIO98, AF2)
+#define GPIO99_USB_P2_1 MFP_CFG(GPIO99, AF2)
+#define GPIO100_USB_P2_4 MFP_CFG(GPIO100, AF2)
+#define GPIO101_USB_P2_8 MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_3 MFP_CFG(GPIO102, AF2)
+#define GPIO103_USB_P2_5 MFP_CFG(GPIO103, AF2)
+#define GPIO104_USB_P2_7 MFP_CFG(GPIO104, AF2)
+
+/* USB P3 */
+#define GPIO75_USB_P3_1 MFP_CFG(GPIO75, AF2)
+#define GPIO76_USB_P3_2 MFP_CFG(GPIO76, AF2)
+#define GPIO77_USB_P3_3 MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_4 MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_5 MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_6 MFP_CFG(GPIO80, AF2)
+
+#define GPIO13_CHOUT0 MFP_CFG(GPIO13, AF6)
+#define GPIO14_CHOUT1 MFP_CFG(GPIO14, AF6)
+
+#define GPIO2_RDY MFP_CFG(GPIO2, AF1)
+#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3)
+
+#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1)
+#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1)
+#define GPIO13_PWM2_OUT MFP_CFG(GPIO13, AF1)
+#define GPIO14_PWM3_OUT MFP_CFG(GPIO14, AF1)
+
+#endif /* __ASM_ARCH_MFP_PXA320_H */
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-pxa/mfp.h
+ *
+ * Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+#define MFPR_BASE (0x40e10000)
+#define MFPR_SIZE (PAGE_SIZE)
+
+#define mfp_to_gpio(m) ((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+ MFP_PIN_INVALID = -1,
+
+ MFP_PIN_GPIO0 = 0,
+ MFP_PIN_GPIO1,
+ MFP_PIN_GPIO2,
+ MFP_PIN_GPIO3,
+ MFP_PIN_GPIO4,
+ MFP_PIN_GPIO5,
+ MFP_PIN_GPIO6,
+ MFP_PIN_GPIO7,
+ MFP_PIN_GPIO8,
+ MFP_PIN_GPIO9,
+ MFP_PIN_GPIO10,
+ MFP_PIN_GPIO11,
+ MFP_PIN_GPIO12,
+ MFP_PIN_GPIO13,
+ MFP_PIN_GPIO14,
+ MFP_PIN_GPIO15,
+ MFP_PIN_GPIO16,
+ MFP_PIN_GPIO17,
+ MFP_PIN_GPIO18,
+ MFP_PIN_GPIO19,
+ MFP_PIN_GPIO20,
+ MFP_PIN_GPIO21,
+ MFP_PIN_GPIO22,
+ MFP_PIN_GPIO23,
+ MFP_PIN_GPIO24,
+ MFP_PIN_GPIO25,
+ MFP_PIN_GPIO26,
+ MFP_PIN_GPIO27,
+ MFP_PIN_GPIO28,
+ MFP_PIN_GPIO29,
+ MFP_PIN_GPIO30,
+ MFP_PIN_GPIO31,
+ MFP_PIN_GPIO32,
+ MFP_PIN_GPIO33,
+ MFP_PIN_GPIO34,
+ MFP_PIN_GPIO35,
+ MFP_PIN_GPIO36,
+ MFP_PIN_GPIO37,
+ MFP_PIN_GPIO38,
+ MFP_PIN_GPIO39,
+ MFP_PIN_GPIO40,
+ MFP_PIN_GPIO41,
+ MFP_PIN_GPIO42,
+ MFP_PIN_GPIO43,
+ MFP_PIN_GPIO44,
+ MFP_PIN_GPIO45,
+ MFP_PIN_GPIO46,
+ MFP_PIN_GPIO47,
+ MFP_PIN_GPIO48,
+ MFP_PIN_GPIO49,
+ MFP_PIN_GPIO50,
+ MFP_PIN_GPIO51,
+ MFP_PIN_GPIO52,
+ MFP_PIN_GPIO53,
+ MFP_PIN_GPIO54,
+ MFP_PIN_GPIO55,
+ MFP_PIN_GPIO56,
+ MFP_PIN_GPIO57,
+ MFP_PIN_GPIO58,
+ MFP_PIN_GPIO59,
+ MFP_PIN_GPIO60,
+ MFP_PIN_GPIO61,
+ MFP_PIN_GPIO62,
+ MFP_PIN_GPIO63,
+ MFP_PIN_GPIO64,
+ MFP_PIN_GPIO65,
+ MFP_PIN_GPIO66,
+ MFP_PIN_GPIO67,
+ MFP_PIN_GPIO68,
+ MFP_PIN_GPIO69,
+ MFP_PIN_GPIO70,
+ MFP_PIN_GPIO71,
+ MFP_PIN_GPIO72,
+ MFP_PIN_GPIO73,
+ MFP_PIN_GPIO74,
+ MFP_PIN_GPIO75,
+ MFP_PIN_GPIO76,
+ MFP_PIN_GPIO77,
+ MFP_PIN_GPIO78,
+ MFP_PIN_GPIO79,
+ MFP_PIN_GPIO80,
+ MFP_PIN_GPIO81,
+ MFP_PIN_GPIO82,
+ MFP_PIN_GPIO83,
+ MFP_PIN_GPIO84,
+ MFP_PIN_GPIO85,
+ MFP_PIN_GPIO86,
+ MFP_PIN_GPIO87,
+ MFP_PIN_GPIO88,
+ MFP_PIN_GPIO89,
+ MFP_PIN_GPIO90,
+ MFP_PIN_GPIO91,
+ MFP_PIN_GPIO92,
+ MFP_PIN_GPIO93,
+ MFP_PIN_GPIO94,
+ MFP_PIN_GPIO95,
+ MFP_PIN_GPIO96,
+ MFP_PIN_GPIO97,
+ MFP_PIN_GPIO98,
+ MFP_PIN_GPIO99,
+ MFP_PIN_GPIO100,
+ MFP_PIN_GPIO101,
+ MFP_PIN_GPIO102,
+ MFP_PIN_GPIO103,
+ MFP_PIN_GPIO104,
+ MFP_PIN_GPIO105,
+ MFP_PIN_GPIO106,
+ MFP_PIN_GPIO107,
+ MFP_PIN_GPIO108,
+ MFP_PIN_GPIO109,
+ MFP_PIN_GPIO110,
+ MFP_PIN_GPIO111,
+ MFP_PIN_GPIO112,
+ MFP_PIN_GPIO113,
+ MFP_PIN_GPIO114,
+ MFP_PIN_GPIO115,
+ MFP_PIN_GPIO116,
+ MFP_PIN_GPIO117,
+ MFP_PIN_GPIO118,
+ MFP_PIN_GPIO119,
+ MFP_PIN_GPIO120,
+ MFP_PIN_GPIO121,
+ MFP_PIN_GPIO122,
+ MFP_PIN_GPIO123,
+ MFP_PIN_GPIO124,
+ MFP_PIN_GPIO125,
+ MFP_PIN_GPIO126,
+ MFP_PIN_GPIO127,
+ MFP_PIN_GPIO0_2,
+ MFP_PIN_GPIO1_2,
+ MFP_PIN_GPIO2_2,
+ MFP_PIN_GPIO3_2,
+ MFP_PIN_GPIO4_2,
+ MFP_PIN_GPIO5_2,
+ MFP_PIN_GPIO6_2,
+ MFP_PIN_GPIO7_2,
+ MFP_PIN_GPIO8_2,
+ MFP_PIN_GPIO9_2,
+ MFP_PIN_GPIO10_2,
+ MFP_PIN_GPIO11_2,
+ MFP_PIN_GPIO12_2,
+ MFP_PIN_GPIO13_2,
+ MFP_PIN_GPIO14_2,
+ MFP_PIN_GPIO15_2,
+ MFP_PIN_GPIO16_2,
+ MFP_PIN_GPIO17_2,
+
+ MFP_PIN_ULPI_STP,
+ MFP_PIN_ULPI_NXT,
+ MFP_PIN_ULPI_DIR,
+
+ MFP_PIN_nXCVREN,
+ MFP_PIN_DF_CLE_nOE,
+ MFP_PIN_DF_nADV1_ALE,
+ MFP_PIN_DF_SCLK_E,
+ MFP_PIN_DF_SCLK_S,
+ MFP_PIN_nBE0,
+ MFP_PIN_nBE1,
+ MFP_PIN_DF_nADV2_ALE,
+ MFP_PIN_DF_INT_RnB,
+ MFP_PIN_DF_nCS0,
+ MFP_PIN_DF_nCS1,
+ MFP_PIN_nLUA,
+ MFP_PIN_nLLA,
+ MFP_PIN_DF_nWE,
+ MFP_PIN_DF_ALE_nWE,
+ MFP_PIN_DF_nRE_nOE,
+ MFP_PIN_DF_ADDR0,
+ MFP_PIN_DF_ADDR1,
+ MFP_PIN_DF_ADDR2,
+ MFP_PIN_DF_ADDR3,
+ MFP_PIN_DF_IO0,
+ MFP_PIN_DF_IO1,
+ MFP_PIN_DF_IO2,
+ MFP_PIN_DF_IO3,
+ MFP_PIN_DF_IO4,
+ MFP_PIN_DF_IO5,
+ MFP_PIN_DF_IO6,
+ MFP_PIN_DF_IO7,
+ MFP_PIN_DF_IO8,
+ MFP_PIN_DF_IO9,
+ MFP_PIN_DF_IO10,
+ MFP_PIN_DF_IO11,
+ MFP_PIN_DF_IO12,
+ MFP_PIN_DF_IO13,
+ MFP_PIN_DF_IO14,
+ MFP_PIN_DF_IO15,
+
+ MFP_PIN_MAX,
+};
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel
+ * (bit 7) (bit 8) (bit 14d) (bit 13d)
+ *
+ * Drive 0 0 0 0 X (1) 0
+ * Drive 1 0 1 X (1) 0 0
+ * Pull hi (1) 1 X(1) 1 0 0
+ * Pull lo (0) 1 X(0) 0 1 0
+ * Z (float) 1 X(0) 0 0 0
+ */
+#define MFP_LPM_DRIVE_LOW 0x8
+#define MFP_LPM_DRIVE_HIGH 0x6
+#define MFP_LPM_PULL_HIGH 0x7
+#define MFP_LPM_PULL_LOW 0x9
+#define MFP_LPM_FLOAT 0x1
+#define MFP_LPM_PULL_NEITHER 0x0
+
+/*
+ * The pullup and pulldown state of the MFP pin is by default determined by
+ * selected alternate function. In case some buggy devices need to override
+ * this default behavior, pxa3xx_mfp_set_pull() can be invoked with one of
+ * the following definition as the parameter.
+ *
+ * Definition pull_sel pullup_en pulldown_en
+ * MFP_PULL_HIGH 1 1 0
+ * MFP_PULL_LOW 1 0 1
+ * MFP_PULL_BOTH 1 1 1
+ * MFP_PULL_NONE 1 0 0
+ * MFP_PULL_DEFAULT 0 X X
+ *
+ * NOTE: pxa3xx_mfp_set_pull() will modify the PULLUP_EN and PULLDOWN_EN
+ * bits, which will cause potential conflicts with the low power mode
+ * setting, device drivers should take care of this
+ */
+#define MFP_PULL_BOTH (0x7u)
+#define MFP_PULL_HIGH (0x6u)
+#define MFP_PULL_LOW (0x5u)
+#define MFP_PULL_NONE (0x4u)
+#define MFP_PULL_DEFAULT (0x0u)
+
+#define MFP_AF0 (0)
+#define MFP_AF1 (1)
+#define MFP_AF2 (2)
+#define MFP_AF3 (3)
+#define MFP_AF4 (4)
+#define MFP_AF5 (5)
+#define MFP_AF6 (6)
+#define MFP_AF7 (7)
+
+#define MFP_DS01X (0)
+#define MFP_DS02X (1)
+#define MFP_DS03X (2)
+#define MFP_DS04X (3)
+#define MFP_DS06X (4)
+#define MFP_DS08X (5)
+#define MFP_DS10X (6)
+#define MFP_DS12X (7)
+
+#define MFP_EDGE_BOTH 0x3
+#define MFP_EDGE_RISE 0x2
+#define MFP_EDGE_FALL 0x1
+#define MFP_EDGE_NONE 0x0
+
+#define MFPR_AF_MASK 0x0007
+#define MFPR_DRV_MASK 0x1c00
+#define MFPR_RDH_MASK 0x0200
+#define MFPR_LPM_MASK 0xe180
+#define MFPR_PULL_MASK 0xe000
+#define MFPR_EDGE_MASK 0x0070
+
+#define MFPR_ALT_OFFSET 0
+#define MFPR_ERE_OFFSET 4
+#define MFPR_EFE_OFFSET 5
+#define MFPR_EC_OFFSET 6
+#define MFPR_SON_OFFSET 7
+#define MFPR_SD_OFFSET 8
+#define MFPR_SS_OFFSET 9
+#define MFPR_DRV_OFFSET 10
+#define MFPR_PD_OFFSET 13
+#define MFPR_PU_OFFSET 14
+#define MFPR_PS_OFFSET 15
+
+#define MFPR(af, drv, rdh, lpm, edge) \
+ (((af) & 0x7) | (((drv) & 0x7) << 10) |\
+ (((rdh) & 0x1) << 9) |\
+ (((lpm) & 0x3) << 7) |\
+ (((lpm) & 0x4) << 12)|\
+ (((lpm) & 0x8) << 10)|\
+ ((!(edge)) << 6) |\
+ (((edge) & 0x1) << 5) |\
+ (((edge) & 0x2) << 3))
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ * bit 0..15 - MFPR value (16-bit)
+ * bit 16..31 - mfp pin index (used to obtain the MFPR offset)
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFPR_DEFAULT - default MFPR value, with
+ * alternate function = 0,
+ * drive strength = fast 1mA (MFP_DS01X)
+ * low power mode = default
+ * release dalay hold = false (RDH bit)
+ * edge detection = none
+ *
+ * MFP_CFG - default MFPR value with alternate function
+ * MFP_CFG_DRV - default MFPR value with alternate function and
+ * pin drive strength
+ * MFP_CFG_LPM - default MFPR value with alternate function and
+ * low power mode
+ * MFP_CFG_X - default MFPR value with alternate function,
+ * pin drive strength and low power mode
+ *
+ * use
+ *
+ * MFP_CFG_PIN - to get the MFP pin index
+ * MFP_CFG_VAL - to get the corresponding MFPR value
+ */
+
+typedef uint32_t mfp_cfg_t;
+
+#define MFP_CFG_PIN(mfp_cfg) (((mfp_cfg) >> 16) & 0xffff)
+#define MFP_CFG_VAL(mfp_cfg) ((mfp_cfg) & 0xffff)
+
+#define MFPR_DEFAULT (0x0000)
+
+#define MFP_CFG(pin, af) \
+ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv) \
+ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\
+ ((MFP_##drv) << 10) | (MFP_##af))
+
+#define MFP_CFG_LPM(pin, af, lpm) \
+ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af) |\
+ (((MFP_LPM_##lpm) & 0x3) << 7) |\
+ (((MFP_LPM_##lpm) & 0x4) << 12) |\
+ (((MFP_LPM_##lpm) & 0x8) << 10))
+
+#define MFP_CFG_X(pin, af, drv, lpm) \
+ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\
+ ((MFP_##drv) << 10) | (MFP_##af) |\
+ (((MFP_LPM_##lpm) & 0x3) << 7) |\
+ (((MFP_LPM_##lpm) & 0x4) << 12) |\
+ (((MFP_LPM_##lpm) & 0x8) << 10))
+
+/* common MFP configurations - processor specific ones defined
+ * in mfp-pxa3xx.h
+ */
+#define GPIO0_GPIO MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO MFP_CFG(GPIO45, AF0)
+
+#define GPIO47_GPIO MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO MFP_CFG(GPIO48, AF0)
+
+#define GPIO53_GPIO MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO MFP_CFG(GPIO55, AF0)
+
+#define GPIO57_GPIO MFP_CFG(GPIO57, AF0)
+
+#define GPIO63_GPIO MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO MFP_CFG(GPIO102, AF0)
+#define GPIO103_GPIO MFP_CFG(GPIO103, AF0)
+#define GPIO104_GPIO MFP_CFG(GPIO104, AF0)
+#define GPIO105_GPIO MFP_CFG(GPIO105, AF0)
+#define GPIO106_GPIO MFP_CFG(GPIO106, AF0)
+#define GPIO107_GPIO MFP_CFG(GPIO107, AF0)
+#define GPIO108_GPIO MFP_CFG(GPIO108, AF0)
+#define GPIO109_GPIO MFP_CFG(GPIO109, AF0)
+#define GPIO110_GPIO MFP_CFG(GPIO110, AF0)
+#define GPIO111_GPIO MFP_CFG(GPIO111, AF0)
+#define GPIO112_GPIO MFP_CFG(GPIO112, AF0)
+#define GPIO113_GPIO MFP_CFG(GPIO113, AF0)
+#define GPIO114_GPIO MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO MFP_CFG(GPIO127, AF0)
+
+#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0)
+#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0)
+#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0)
+#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0)
+#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0)
+#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0)
+#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0)
+
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by pxa3xx_mfp_init_addr()
+ *
+ * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
+ * structure, which represents a range of MFP pins from "start" to
+ * "end", with the offset begining at "offset", to define a single
+ * pin, let "end" = -1
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR() to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct pxa3xx_mfp_addr_map {
+ unsigned int start;
+ unsigned int end;
+ unsigned long offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+ { MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+ { MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
+
+struct pxa3xx_mfp_pin {
+ unsigned long mfpr_off; /* MFPRxx register offset */
+ unsigned long mfpr_val; /* MFPRxx register value */
+};
+
+/*
+ * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
+ * to the MFPR register
+ */
+unsigned long pxa3xx_mfp_read(int mfp);
+void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
+
+/*
+ * pxa3xx_mfp_set_afds - set MFP alternate function and drive strength
+ * pxa3xx_mfp_set_rdh - set MFP release delay hold on/off
+ * pxa3xx_mfp_set_lpm - set MFP low power mode state
+ * pxa3xx_mfp_set_edge - set MFP edge detection in low power mode
+ *
+ * use these functions to override/change the default configuration
+ * done by pxa3xx_mfp_set_config(s)
+ */
+void pxa3xx_mfp_set_afds(int mfp, int af, int ds);
+void pxa3xx_mfp_set_rdh(int mfp, int rdh);
+void pxa3xx_mfp_set_lpm(int mfp, int lpm);
+void pxa3xx_mfp_set_edge(int mfp, int edge);
+
+/*
+ * pxa3xx_mfp_config - configure the MFPR registers
+ *
+ * used by board specific initialization code
+ */
+void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num);
+
+/*
+ * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
+ * index and MFPR register offset
+ *
+ * used by processor specific code
+ */
+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
+void __init pxa3xx_init_mfp(void);
+
+#endif /* __ASM_ARCH_MFP_H */
#define GPIO_bit(x) (1 << ((x) & 0x1f))
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
/* Interrupt Controller */
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h
+ *
+ * PXA3xx specific register definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PXA3XX_REGS_H
+#define __ASM_ARCH_PXA3XX_REGS_H
+
+/*
+ * Application Subsystem Clock
+ */
+#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */
+#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */
+#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */
+#define CKENA __REG(0x4134000C) /* A Clock Enable Register */
+#define CKENB __REG(0x41340010) /* B Clock Enable Register */
+#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */
+
+/*
+ * Clock Enable Bit
+ */
+#define CKEN_LCD 1 /* < LCD Clock Enable */
+#define CKEN_USBH 2 /* < USB host clock enable */
+#define CKEN_CAMERA 3 /* < Camera interface clock enable */
+#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */
+#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */
+#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */
+#define CKEN_SMC 9 /* < Static Memory Controller clock enable */
+#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */
+#define CKEN_BOOT 11 /* < Boot rom clock enable */
+#define CKEN_MMC1 12 /* < MMC1 Clock enable */
+#define CKEN_MMC2 13 /* < MMC2 clock enable */
+#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */
+#define CKEN_CIR 15 /* < Consumer IR Clock Enable */
+#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */
+#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */
+#define CKEN_TPM 19 /* < TPM clock enable */
+#define CKEN_UDC 20 /* < UDC clock enable */
+#define CKEN_BTUART 21 /* < BTUART clock enable */
+#define CKEN_FFUART 22 /* < FFUART clock enable */
+#define CKEN_STUART 23 /* < STUART clock enable */
+#define CKEN_AC97 24 /* < AC97 clock enable */
+#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */
+#define CKEN_SSP1 26 /* < SSP1 clock enable */
+#define CKEN_SSP2 27 /* < SSP2 clock enable */
+#define CKEN_SSP3 28 /* < SSP3 clock enable */
+#define CKEN_SSP4 29 /* < SSP4 clock enable */
+#define CKEN_MSL0 30 /* < MSL0 clock enable */
+#define CKEN_PWM0 32 /* < PWM[0] clock enable */
+#define CKEN_PWM1 33 /* < PWM[1] clock enable */
+#define CKEN_I2C 36 /* < I2C clock enable */
+#define CKEN_INTC 38 /* < Interrupt controller clock enable */
+#define CKEN_GPIO 39 /* < GPIO clock enable */
+#define CKEN_1WIRE 40 /* < 1-wire clock enable */
+#define CKEN_HSIO2 41 /* < HSIO2 clock enable */
+#define CKEN_MINI_IM 48 /* < Mini-IM */
+#define CKEN_MINI_LCD 49 /* < Mini LCD */
+
+#if defined(CONFIG_CPU_PXA310)
+#define CKEN_MMC3 5 /* < MMC3 Clock Enable */
+#define CKEN_MVED 43 /* < MVED clock enable */
+#endif
+
+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
+#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */
+#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */
+
+#endif /* __ASM_ARCH_PXA3XX_REGS_H */
#else
#define CLOCK_TICK_RATE 3250000
#endif
+#else
+#define CLOCK_TICK_RATE 3250000
#endif
--- /dev/null
+#ifndef __ASM_ARCH_ZYLONITE_H
+#define __ASM_ARCH_ZYLONITE_H
+
+#define ZYLONITE_ETH_PHYS 0x14000000
+
+/* the following variables are processor specific and initialized
+ * by the corresponding zylonite_pxa3xx_init()
+ */
+extern int gpio_backlight;
+extern int gpio_eth_irq;
+
+extern int lcd_id;
+extern int lcd_orientation;
+
+#ifdef CONFIG_CPU_PXA300
+extern void zylonite_pxa300_init(void);
+#else
+static inline void zylonite_pxa300_init(void)
+{
+ if (cpu_is_pxa300() || cpu_is_pxa310())
+ panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__);
+}
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+extern void zylonite_pxa320_init(void);
+#else
+static inline void zylonite_pxa320_init(void)
+{
+ if (cpu_is_pxa320())
+ panic("%s: PXA320 not supported\n", __FUNCTION__);
+}
+#endif
+
+#endif /* __ASM_ARCH_ZYLONITE_H */
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff