!(hcd->driver->flags & HCD_LOCAL_MEM))
return 0;
- for (i = 0; i < HCD_BUFFER_POOLS; i++) {
- if (!(size = pool_max [i]))
+ for (i = 0; i < HCD_BUFFER_POOLS; i++) {
+ size = pool_max[i];
+ if (!size)
continue;
snprintf(name, sizeof name, "buffer-%d", size);
hcd->pool[i] = dma_pool_create(name, hcd->self.controller,
*/
void hcd_buffer_destroy(struct usb_hcd *hcd)
{
- int i;
+ int i;
- for (i = 0; i < HCD_BUFFER_POOLS; i++) {
- struct dma_pool *pool = hcd->pool[i];
+ for (i = 0; i < HCD_BUFFER_POOLS; i++) {
+ struct dma_pool *pool = hcd->pool[i];
if (pool) {
dma_pool_destroy(pool);
hcd->pool[i] = NULL;
/* Allocate space for the right(?) number of endpoints */
num_ep = num_ep_orig = alt->desc.bNumEndpoints;
- alt->desc.bNumEndpoints = 0; // Use as a counter
+ alt->desc.bNumEndpoints = 0; /* Use as a counter */
if (num_ep > USB_MAXENDPOINTS) {
dev_warn(ddev, "too many endpoints for config %d interface %d "
"altsetting %d: %d, using maximum allowed: %d\n",
num_ep = USB_MAXENDPOINTS;
}
- if (num_ep > 0) { /* Can't allocate 0 bytes */
+ if (num_ep > 0) {
+ /* Can't allocate 0 bytes */
len = sizeof(struct usb_host_endpoint) * num_ep;
alt->endpoint = kzalloc(len, GFP_KERNEL);
if (!alt->endpoint)
return 0;
}
-// hub-only!! ... and only exported for reset/reinit path.
-// otherwise used internally on disconnect/destroy path
+/* hub-only!! ... and only exported for reset/reinit path.
+ * otherwise used internally on disconnect/destroy path
+ */
void usb_destroy_configuration(struct usb_device *dev)
{
int c, i;
kfree(cf->string);
for (i = 0; i < cf->desc.bNumInterfaces; i++) {
if (cf->intf_cache[i])
- kref_put(&cf->intf_cache[i]->ref,
+ kref_put(&cf->intf_cache[i]->ref,
usb_release_interface_cache);
}
}
unsigned int cfgno, length;
unsigned char *buffer;
unsigned char *bigbuffer;
- struct usb_config_descriptor *desc;
+ struct usb_config_descriptor *desc;
cfgno = 0;
if (dev->authorized == 0) /* Not really an error */
intf = to_usb_interface(dev);
udev = interface_to_usbdev(intf);
- if (udev->authorized == 0) {
- dev_err(&intf->dev, "Device is not authorized for usage\n");
- return -ENODEV;
- }
+ if (udev->authorized == 0) {
+ dev_err(&intf->dev, "Device is not authorized for usage\n");
+ return -ENODEV;
+ }
id = usb_match_id(intf, driver->id_table);
if (!id)
* lock.
*/
int usb_driver_claim_interface(struct usb_driver *driver,
- struct usb_interface *iface, void* priv)
+ struct usb_interface *iface, void *priv)
{
struct device *dev = &iface->dev;
struct usb_device *udev = interface_to_usbdev(iface);
return 0;
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
- (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass))
+ (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
return 0;
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
struct usb_device *usb_dev;
/* driver is often null here; dev_dbg() would oops */
- pr_debug ("usb %s: uevent\n", dev->bus_id);
+ pr_debug("usb %s: uevent\n", dev->bus_id);
if (is_usb_device(dev))
usb_dev = to_usb_device(dev);
}
if (usb_dev->devnum < 0) {
- pr_debug ("usb %s: already deleted?\n", dev->bus_id);
+ pr_debug("usb %s: already deleted?\n", dev->bus_id);
return -ENODEV;
}
if (!usb_dev->bus) {
- pr_debug ("usb %s: bus removed?\n", dev->bus_id);
+ pr_debug("usb %s: bus removed?\n", dev->bus_id);
return -ENODEV;
}
dev_err(&intf->dev, "%s error %d\n",
"suspend", status);
} else {
- // FIXME else if there's no suspend method, disconnect...
- // Not possible if auto_pm is set...
+ /*
+ * FIXME else if there's no suspend method, disconnect...
+ * Not possible if auto_pm is set...
+ */
dev_warn(&intf->dev, "no suspend for driver %s?\n",
driver->name);
mark_quiesced(intf);
dev_err(&intf->dev, "%s error %d\n",
"reset_resume", status);
} else {
- // status = -EOPNOTSUPP;
+ /* status = -EOPNOTSUPP; */
dev_warn(&intf->dev, "no %s for driver %s?\n",
"reset_resume", driver->name);
}
dev_err(&intf->dev, "%s error %d\n",
"resume", status);
} else {
- // status = -EOPNOTSUPP;
+ /* status = -EOPNOTSUPP; */
dev_warn(&intf->dev, "no %s for driver %s?\n",
"resume", driver->name);
}
* so if a root hub's controller is suspended
* then we're stuck. */
status = usb_resume_device(udev);
- }
+ }
} else {
/* Needed for setting udev->dev.power.power_state.event,
return (value < 0) ? value : count;
}
-static DEVICE_ATTR(bConfigurationValue, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(bConfigurationValue, S_IRUGO | S_IWUSR,
show_bConfigurationValue, set_bConfigurationValue);
/* String fields */
/* Interface Accociation Descriptor fields */
#define usb_intf_assoc_attr(field, format_string) \
static ssize_t \
-show_iad_##field (struct device *dev, struct device_attribute *attr, \
+show_iad_##field(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
- struct usb_interface *intf = to_usb_interface (dev); \
+ struct usb_interface *intf = to_usb_interface(dev); \
\
- return sprintf (buf, format_string, \
- intf->intf_assoc->field); \
+ return sprintf(buf, format_string, \
+ intf->intf_assoc->field); \
} \
static DEVICE_ATTR(iad_##field, S_IRUGO, show_iad_##field, NULL);
-usb_intf_assoc_attr (bFirstInterface, "%02x\n")
-usb_intf_assoc_attr (bInterfaceCount, "%02d\n")
-usb_intf_assoc_attr (bFunctionClass, "%02x\n")
-usb_intf_assoc_attr (bFunctionSubClass, "%02x\n")
-usb_intf_assoc_attr (bFunctionProtocol, "%02x\n")
+usb_intf_assoc_attr(bFirstInterface, "%02x\n")
+usb_intf_assoc_attr(bInterfaceCount, "%02d\n")
+usb_intf_assoc_attr(bFunctionClass, "%02x\n")
+usb_intf_assoc_attr(bFunctionSubClass, "%02x\n")
+usb_intf_assoc_attr(bFunctionProtocol, "%02x\n")
/* Interface fields */
#define usb_intf_attr(field, format_string) \
*
* A pointer to the urb with the incremented reference counter is returned.
*/
-struct urb * usb_get_urb(struct urb *urb)
+struct urb *usb_get_urb(struct urb *urb)
{
if (urb)
kref_get(&urb->kref);
* describing that request to the USB subsystem. Request completion will
* be indicated later, asynchronously, by calling the completion handler.
* The three types of completion are success, error, and unlink
- * (a software-induced fault, also called "request cancellation").
+ * (a software-induced fault, also called "request cancellation").
*
* URBs may be submitted in interrupt context.
*
* semaphores), or
* (c) current->state != TASK_RUNNING, this is the case only after
* you've changed it.
- *
+ *
* GFP_NOIO is used in the block io path and error handling of storage
* devices.
*
if (!urb || urb->hcpriv || !urb->complete)
return -EINVAL;
- if (!(dev = urb->dev) || dev->state < USB_STATE_DEFAULT)
+ dev = urb->dev;
+ if ((!dev) || (dev->state < USB_STATE_DEFAULT))
return -ENODEV;
/* For now, get the endpoint from the pipe. Eventually drivers
max *= mult;
}
- if (urb->number_of_packets <= 0)
+ if (urb->number_of_packets <= 0)
return -EINVAL;
for (n = 0; n < urb->number_of_packets; n++) {
len = urb->iso_frame_desc[n].length;
- if (len < 0 || len > max)
+ if (len < 0 || len > max)
return -EMSGSIZE;
urb->iso_frame_desc[n].status = -EXDEV;
urb->iso_frame_desc[n].actual_length = 0;
/* too big? */
switch (dev->speed) {
case USB_SPEED_HIGH: /* units are microframes */
- // NOTE usb handles 2^15
+ /* NOTE usb handles 2^15 */
if (urb->interval > (1024 * 8))
urb->interval = 1024 * 8;
max = 1024 * 8;
if (xfertype == USB_ENDPOINT_XFER_INT) {
if (urb->interval > 255)
return -EINVAL;
- // NOTE ohci only handles up to 32
+ /* NOTE ohci only handles up to 32 */
max = 128;
} else {
if (urb->interval > 1024)
urb->interval = 1024;
- // NOTE usb and ohci handle up to 2^15
+ /* NOTE usb and ohci handle up to 2^15 */
max = 1024;
}
break;
spin_lock_irq(&anchor->lock);
while (!list_empty(&anchor->urb_list)) {
- victim = list_entry(anchor->urb_list.prev, struct urb, anchor_list);
+ victim = list_entry(anchor->urb_list.prev, struct urb,
+ anchor_list);
/* we must make sure the URB isn't freed before we kill it*/
usb_get_urb(victim);
spin_unlock_irq(&anchor->lock);
* Don't call this function unless you are bound to the intf interface
* or you have locked the device!
*/
-struct usb_host_interface *usb_altnum_to_altsetting(const struct usb_interface *intf,
- unsigned int altnum)
+struct usb_host_interface *usb_altnum_to_altsetting(
+ const struct usb_interface *intf,
+ unsigned int altnum)
{
int i;
struct usb_interface *interface;
};
-static int __find_interface(struct device * dev, void * data)
+static int __find_interface(struct device *dev, void *data)
{
struct find_interface_arg *arg = data;
struct usb_interface *intf;
* @drv: the driver whose current configuration is considered
* @minor: the minor number of the desired device
*
- * This walks the driver device list and returns a pointer to the interface
+ * This walks the driver device list and returns a pointer to the interface
* with the matching minor. Note, this only works for devices that share the
* USB major number.
*/
*
* This call may not be used in a non-sleeping context.
*/
-struct usb_device *
-usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
+struct usb_device *usb_alloc_dev(struct usb_device *parent,
+ struct usb_bus *bus, unsigned port1)
{
struct usb_device *dev;
struct usb_hcd *usb_hcd = container_of(bus, struct usb_hcd, self);
return -EHOSTUNREACH;
if (iface) {
switch (iface->condition) {
- case USB_INTERFACE_BINDING:
+ case USB_INTERFACE_BINDING:
return 0;
- case USB_INTERFACE_BOUND:
+ case USB_INTERFACE_BOUND:
break;
- default:
+ default:
return -EINTR;
}
}
struct list_head *buslist;
struct usb_bus *bus;
struct usb_device *dev = NULL;
-
+
mutex_lock(&usb_bus_list_lock);
for (buslist = usb_bus_list.next;
- buslist != &usb_bus_list;
+ buslist != &usb_bus_list;
buslist = buslist->next) {
bus = container_of(buslist, struct usb_bus, bus_list);
if (!bus->root_hub)
*/
int __usb_get_extra_descriptor(char *buffer, unsigned size,
- unsigned char type, void **ptr)
+ unsigned char type, void **ptr)
{
struct usb_descriptor_header *header;
printk(KERN_ERR
"%s: bogus descriptor, type %d length %d\n",
usbcore_name,
- header->bDescriptorType,
+ header->bDescriptorType,
header->bLength);
return -1;
}
*
* When the buffer is no longer used, free it with usb_buffer_free().
*/
-void *usb_buffer_alloc(
- struct usb_device *dev,
- size_t size,
- gfp_t mem_flags,
- dma_addr_t *dma
-)
+void *usb_buffer_alloc(struct usb_device *dev, size_t size, gfp_t mem_flags,
+ dma_addr_t *dma)
{
if (!dev || !dev->bus)
return NULL;
* been allocated using usb_buffer_alloc(), and the parameters must match
* those provided in that allocation request.
*/
-void usb_buffer_free(
- struct usb_device *dev,
- size_t size,
- void *addr,
- dma_addr_t dma
-)
+void usb_buffer_free(struct usb_device *dev, size_t size, void *addr,
+ dma_addr_t dma)
{
if (!dev || !dev->bus)
return;
urb->setup_packet,
sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
- // FIXME generic api broken like pci, can't report errors
- // if (urb->transfer_dma == DMA_ADDR_INVALID) return 0;
+ /* FIXME generic api broken like pci, can't report errors */
+ /* if (urb->transfer_dma == DMA_ADDR_INVALID) return 0; */
} else
urb->transfer_dma = ~0;
urb->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP
|| !controller->dma_mask)
return -1;
- // FIXME generic api broken like pci, can't report errors
+ /* FIXME generic api broken like pci, can't report errors */
return dma_map_sg(controller, sg, nents,
is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
if (retval)
goto out;
retval = bus_register(&usb_bus_type);
- if (retval)
+ if (retval)
goto bus_register_failed;
retval = usb_host_init();
if (retval)
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff