#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
-#include <linux/i2c/pca954x.h>
#include <linux/jiffies.h>
#include <linux/module.h>
+#include <linux/platform_data/pca954x.h>
#include <linux/slab.h>
/*
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
-#include <linux/i2c/pca954x.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
+#include <linux/platform_data/pca954x.h>
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+++ /dev/null
-/*
- *
- * pca954x.h - I2C multiplexer/switch support
- *
- * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
- * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
- * Michael Lawnick <michael.lawnick.ext@nsn.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#ifndef _LINUX_I2C_PCA954X_H
-#define _LINUX_I2C_PCA954X_H
-
-/* Platform data for the PCA954x I2C multiplexers */
-
-/* Per channel initialisation data:
- * @adap_id: bus number for the adapter. 0 = don't care
- * @deselect_on_exit: set this entry to 1, if your H/W needs deselection
- * of this channel after transaction.
- *
- */
-struct pca954x_platform_mode {
- int adap_id;
- unsigned int deselect_on_exit:1;
- unsigned int class;
-};
-
-/* Per mux/switch data, used with i2c_register_board_info */
-struct pca954x_platform_data {
- struct pca954x_platform_mode *modes;
- int num_modes;
-};
-
-#endif /* _LINUX_I2C_PCA954X_H */
--- /dev/null
+/*
+ *
+ * pca954x.h - I2C multiplexer/switch support
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ * Michael Lawnick <michael.lawnick.ext@nsn.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef _LINUX_I2C_PCA954X_H
+#define _LINUX_I2C_PCA954X_H
+
+/* Platform data for the PCA954x I2C multiplexers */
+
+/* Per channel initialisation data:
+ * @adap_id: bus number for the adapter. 0 = don't care
+ * @deselect_on_exit: set this entry to 1, if your H/W needs deselection
+ * of this channel after transaction.
+ *
+ */
+struct pca954x_platform_mode {
+ int adap_id;
+ unsigned int deselect_on_exit:1;
+ unsigned int class;
+};
+
+/* Per mux/switch data, used with i2c_register_board_info */
+struct pca954x_platform_data {
+ struct pca954x_platform_mode *modes;
+ int num_modes;
+};
+
+#endif /* _LINUX_I2C_PCA954X_H */