+++ /dev/null
-* Broadcom SATA3 PHY for STB
-
-Required properties:
-- compatible: should be one or more of
- "brcm,bcm7425-sata-phy"
- "brcm,bcm7445-sata-phy"
- "brcm,phy-sata3"
-- address-cells: should be 1
-- size-cells: should be 0
-- reg: register range for the PHY PCB interface
-- reg-names: should be "phy"
-
-Sub-nodes:
- Each port's PHY should be represented as a sub-node.
-
-Sub-nodes required properties:
-- reg: the PHY number
-- phy-cells: generic PHY binding; must be 0
-Optional:
-- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
-
-
-Example:
-
- sata-phy@f0458100 {
- compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
- reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sata-phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- };
-
- sata-phy@1 {
- reg = <1>;
- #phy-cells = <0>;
- };
- };
--- /dev/null
+* Broadcom SATA3 PHY
+
+Required properties:
+- compatible: should be one or more of
+ "brcm,bcm7425-sata-phy"
+ "brcm,bcm7445-sata-phy"
+ "brcm,iproc-ns2-sata-phy"
+ "brcm,phy-sata3"
+- address-cells: should be 1
+- size-cells: should be 0
+- reg: register ranges for the PHY PCB interface
+- reg-names: should be "phy" and "phy-ctrl"
+ The "phy-ctrl" registers are only required for
+ "brcm,iproc-ns2-sata-phy".
+
+Sub-nodes:
+ Each port's PHY should be represented as a sub-node.
+
+Sub-nodes required properties:
+- reg: the PHY number
+- phy-cells: generic PHY binding; must be 0
+
+Sub-nodes optional properties:
+- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
+ This property is not applicable for "brcm,iproc-ns2-sata-phy".
+
+Example:
+ sata-phy@f0458100 {
+ compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+ reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };