powerpc/fsl-booke: Add T1024 QDS board support

Add support for Freescale T1024/T1023 QorIQ Development System Board.

T1024QDS is a high-performance computing evaluation, development and
test platform for T1024 QorIQ Power Architecture processor.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[scottwood: vendor prefix: s/at24/atmel/ and trimmed detailed
 board description with too-long lines]
Signed-off-by: Scott Wood <scottwood@freescale.com>

diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index dbe65783cc2dfac22a39df968fa0c4e4c617ed35..df1f068a5376412810b1d30e08935e6d7b7ecb2a 100644 (file)
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -305,26 +305,26 @@
 /include/ "qoriq-gpio-2.dtsi"
 /include/ "qoriq-gpio-3.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
-               usb0: usb@210000 {
-                       compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
-                       fsl,iommu-parent = <&pamu0>;
-                       fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
-                       phy_type = "utmi";
-                       port0;
-               };
+       usb0: usb@210000 {
+               compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+               fsl,iommu-parent = <&pamu0>;
+               fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+               phy_type = "utmi";
+               port0;
+       };
 /include/ "qoriq-usb2-dr-0.dtsi"
-               usb1: usb@211000 {
-                       compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
-                       fsl,iommu-parent = <&pamu0>;
-                       fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
-                       dr_mode = "host";
-                       phy_type = "utmi";
-               };
+       usb1: usb@211000 {
+               compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+               fsl,iommu-parent = <&pamu0>;
+               fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+               dr_mode = "host";
+               phy_type = "utmi";
+       };
 /include/ "qoriq-sata2-0.dtsi"
-sata@220000 {
-                       fsl,iommu-parent = <&pamu0>;
-                       fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
-};
+       sata@220000 {
+               fsl,iommu-parent = <&pamu0>;
+               fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+       };
 
 /include/ "qoriq-sec5.0-0.dtsi"
 };

diff --git a/arch/powerpc/boot/dts/t1024qds.dts b/arch/powerpc/boot/dts/t1024qds.dts
new file mode 100644 (file)
index 0000000..f31fabb
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1024qds.dts
@@ -0,0 +1,251 @@
+/*
+ * T1024 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in the
+ *      documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *      names of its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t102xsi-pre.dtsi"
+
+/ {
+       model = "fsl,T1024QDS";
+       compatible = "fsl,T1024QDS";
+       #address-cells = <2>;
+       #size-cells = <2>;
+       interrupt-parent = <&mpic>;
+
+       ifc: localbus@ffe124000 {
+               reg = <0xf 0xfe124000 0 0x2000>;
+               ranges = <0 0 0xf 0xe8000000 0x08000000
+                         2 0 0xf 0xff800000 0x00010000
+                         3 0 0xf 0xffdf0000 0x00008000>;
+
+               nor@0,0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "cfi-flash";
+                       reg = <0x0 0x0 0x8000000>;
+                       bank-width = <2>;
+                       device-width = <1>;
+               };
+
+               nand@2,0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,ifc-nand";
+                       reg = <0x2 0x0 0x10000>;
+               };
+
+               board-control@3,0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,tetra-fpga", "fsl,fpga-qixis";
+                       reg = <3 0 0x300>;
+                       ranges = <0 3 0 0x300>;
+               };
+       };
+
+       memory {
+               device_type = "memory";
+       };
+
+       dcsr: dcsr@f00000000 {
+               ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+       };
+
+       soc: soc@ffe000000 {
+               ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+               reg = <0xf 0xfe000000 0 0x00001000>;
+               spi@110000 {
+                       flash@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "micron,n25q128a11";  /* 16MB */
+                               reg = <0>;
+                               spi-max-frequency = <10000000>;
+                       };
+
+                       flash@1 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "sst,sst25wf040";  /* 512KB */
+                               reg = <1>;
+                               spi-max-frequency = <10000000>;
+                       };
+
+                       flash@2 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "eon,en25s64";   /* 8MB */
+                               reg = <2>;
+                               spi-max-frequency = <10000000>;
+                       };
+
+                       slic@2 {
+                               compatible = "maxim,ds26522";
+                               reg = <2>;
+                               spi-max-frequency = <2000000>;
+                       };
+
+                       slic@3 {
+                               compatible = "maxim,ds26522";
+                               reg = <3>;
+                               spi-max-frequency = <2000000>;
+                       };
+               };
+
+               i2c@118000 {
+                       pca9547@77 {
+                               compatible = "nxp,pca9547";
+                               reg = <0x77>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               i2c@0 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <0x0>;
+
+                                       eeprom@50 {
+                                               compatible = "atmel,24c512";
+                                               reg = <0x50>;
+                                       };
+
+                                       eeprom@51 {
+                                               compatible = "atmel,24c02";
+                                               reg = <0x51>;
+                                       };
+
+                                       eeprom@57 {
+                                               compatible = "atmel,24c02";
+                                               reg = <0x57>;
+                                       };
+                               };
+
+                               i2c@2 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <0x2>;
+
+                                       ina220@40 {
+                                               compatible = "ti,ina220";
+                                               reg = <0x40>;
+                                               shunt-resistor = <1000>;
+                                       };
+
+                                       ina220@41 {
+                                               compatible = "ti,ina220";
+                                               reg = <0x41>;
+                                               shunt-resistor = <1000>;
+                                       };
+                               };
+
+                               i2c@3 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <0x3>;
+
+                                       adt7461@4c {
+                                               /* Thermal Monitor */
+                                               compatible = "adi,adt7461";
+                                               reg = <0x4c>;
+                                       };
+
+                                       eeprom@55 {
+                                               compatible = "atmel,24c02";
+                                               reg = <0x55>;
+                                       };
+
+                                       eeprom@56 {
+                                               compatible = "atmel,24c512";
+                                               reg = <0x56>;
+                                       };
+
+                                       eeprom@57 {
+                                               compatible = "atmel,24c512";
+                                               reg = <0x57>;
+                                       };
+                               };
+                       };
+                       rtc@68 {
+                               compatible = "dallas,ds3232";
+                               reg = <0x68>;
+                               interrupts = <0x5 0x1 0 0>;
+                       };
+               };
+       };
+
+       pci0: pcie@ffe240000 {
+               reg = <0xf 0xfe240000 0 0x10000>;
+               ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+                         0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+               pcie@0 {
+                       ranges = <0x02000000 0 0xe0000000
+                                 0x02000000 0 0xe0000000
+                                 0 0x10000000
+
+                                 0x01000000 0 0x00000000
+                                 0x01000000 0 0x00000000
+                                 0 0x00010000>;
+               };
+       };
+
+       pci1: pcie@ffe250000 {
+               reg = <0xf 0xfe250000 0 0x10000>;
+               ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+                         0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+               pcie@0 {
+                       ranges = <0x02000000 0 0xe0000000
+                                 0x02000000 0 0xe0000000
+                                 0 0x10000000
+
+                                 0x01000000 0 0x00000000
+                                 0x01000000 0 0x00000000
+                                 0 0x00010000>;
+               };
+       };
+
+       pci2: pcie@ffe260000 {
+               reg = <0xf 0xfe260000 0 0x10000>;
+               ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+                         0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+               pcie@0 {
+                       ranges = <0x02000000 0 0xe0000000
+                                 0x02000000 0 0xe0000000
+                                 0 0x10000000
+
+                                 0x01000000 0 0x00000000
+                                 0x01000000 0 0x00000000
+                                 0 0x00010000>;
+               };
+       };
+};
+
+/include/ "fsl/t1024si-post.dtsi"

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 2fb4b24368a6e6ae7851ade3bcae379d2245229b..e628d4001272fb53dbae90de7304d3c2c663e71c 100644 (file)
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -282,7 +282,7 @@ config CORENET_GENERIC
          For 64bit kernel, the following boards are supported:
            T208x QDS/RDB, T4240 QDS/RDB and B4 QDS
          The following boards are supported for both 32bit and 64bit kernel:
-           P5020 DS, P5040 DS and T104xQDS/RDB
+           P5020 DS, P5040 DS, T102x QDS, T104x QDS/RDB
 
 endif # FSL_SOC_BOOKE
 

diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index 9824d2cf79bd6d618dba10e1bb4e38f4b946b408..f61f47780486ab767bca8d653a63327b09f3eba5 100644 (file)
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -150,6 +150,7 @@ static const char * const boards[] __initconst = {
        "fsl,B4860QDS",
        "fsl,B4420QDS",
        "fsl,B4220QDS",
+       "fsl,T1024QDS",
        "fsl,T1040QDS",
        "fsl,T1042QDS",
        "fsl,T1040RDB",