*
* Setup a VA for the Versatile Vectored Interrupt Controller.
*/
-#define VA_VIC_BASE IO_ADDRESS(VERSATILE_VIC_BASE)
-#define VA_SIC_BASE IO_ADDRESS(VERSATILE_SIC_BASE)
+#define __io_address(n) __io(IO_ADDRESS(n))
+#define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE)
+#define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE)
static void vic_mask_irq(unsigned int irq)
{
iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
}
-#define VERSATILE_REFCOUNTER (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
+#define VERSATILE_REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
/*
* This is the Versatile sched_clock implementation. This has
}
-#define VERSATILE_FLASHCTRL (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
+#define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
static int versatile_flash_init(void)
{
.resource = smc91x_resources,
};
-#define VERSATILE_SYSMCI (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
+#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
unsigned int mmc_status(struct device *dev)
{
static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
{
- unsigned long sys_lock = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
+ void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
#if defined(CONFIG_ARCH_VERSATILE_PB)
- unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
+ void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
#elif defined(CONFIG_MACH_VERSATILE_AB)
- unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
+ void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
#endif
u32 val;
*/
static struct clcd_panel *versatile_clcd_panel(void)
{
- unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
+ void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
struct clcd_panel *panel = &vga;
u32 val;
*/
static void versatile_clcd_disable(struct clcd_fb *fb)
{
- unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
+ void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
*/
if (fb->panel == &sanyo_2_5_in) {
- unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL);
+ void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
unsigned long ctrl;
ctrl = readl(versatile_ib2_ctrl);
*/
static void versatile_clcd_enable(struct clcd_fb *fb)
{
- unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
+ void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
*/
if (fb->panel == &sanyo_2_5_in) {
- unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL);
+ void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
unsigned long ctrl;
ctrl = readl(versatile_ib2_ctrl);
};
#ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
+#define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
static void versatile_leds_event(led_event_t ledevt)
{
/*
* Where is the timer (VA)?
*/
-#define TIMER0_VA_BASE IO_ADDRESS(VERSATILE_TIMER0_1_BASE)
-#define TIMER1_VA_BASE (IO_ADDRESS(VERSATILE_TIMER0_1_BASE) + 0x20)
-#define TIMER2_VA_BASE IO_ADDRESS(VERSATILE_TIMER2_3_BASE)
-#define TIMER3_VA_BASE (IO_ADDRESS(VERSATILE_TIMER2_3_BASE) + 0x20)
-#define VA_IC_BASE IO_ADDRESS(VERSATILE_VIC_BASE)
+#define TIMER0_VA_BASE __io_address(VERSATILE_TIMER0_1_BASE)
+#define TIMER1_VA_BASE (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
+#define TIMER2_VA_BASE __io_address(VERSATILE_TIMER2_3_BASE)
+#define TIMER3_VA_BASE (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
+#define VA_IC_BASE __io_address(VERSATILE_VIC_BASE)
/*
* How long is the timer interval?
* VERSATILE_REFCLK is 32KHz
* VERSATILE_TIMCLK is 1MHz
*/
- val = readl(IO_ADDRESS(VERSATILE_SCTL_BASE));
+ val = readl(__io_address(VERSATILE_SCTL_BASE));
writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
- IO_ADDRESS(VERSATILE_SCTL_BASE));
+ __io_address(VERSATILE_SCTL_BASE));
/*
* Initialise to a known state (all timers off)